Staff Profile

Full NamePROF. MADYA Dr. MOHD KHIR BIN MOHD NOR
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN MEKANIKAL
Email
Designation DS54 - PROFESOR MADYA
  PENYELIDIK BERSEKUTU
PUSAT PEMBUATAN DAN BAHAN TERMAJU (AMMC)
INSTITUT KEJURUTERAAN INTEGRASI
  PENYELIDIK UTAMA
CRASHWORTHINESS AND COLLISIONS RESEARCH GROUP (COLORED)
FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

Field of Expertise

Field Category (KPT) PHYSICAL SCIENCES
Field (KPT) Other Physical Sciences n.e.c.
Field of Specialization (KPT) Other Physical Sciences n.e.c.

Areas of Research Interest

1. Theoretical, numerical and experimental investigation of the dynamic behaviour of materials and engineering structures
2. Development and application of simulation tools, and experimental techniques for structures testing under dynamic loading

Innovation Field of Interest

1. Aerospace structures
2. Automotive vehicle structures

Academic Qualification

YearQualificationInstitution
2012 DOKTOR FALSAFAH PLASTICITY CRANFIELD UNIVERSITY
2009 SARJANA STRUCTURES, CRASHWORTHINESS & IMPACT CRANFIELD UNIVERSITY
2006 SARJANA MUDA KEJURUTERAAN MEKANIKAL UNIVERSITI TEKNOLOGI MALAYSIA

Professional Appointments

DS54 - Profesor Madya

Management Experience

DateDescription
01/04/2021 - Penyelidik Bersekutu
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/04/2021 - 30/04/2026 Penyelidik Bersekutu
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/01/2023 - 31/12/2024 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Crashworthiness and Collisions Research Group (COLORED)
01/08/2021 - 31/07/2023 Timbalan Dekan (Kokurikulum)
Pusat Pengajian Umum dan Kokurikulum
01/01/2021 - 31/12/2022 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Crashworthiness and Collisions Research Group (COLORED)
01/06/2022 - 18/06/2022 Menjalankan Tugas (Dekan)
Pusat Pengajian Umum dan Kokurikulum, Pejabat Dekan
01/08/2019 - 31/07/2021 Timbalan Dekan (Kokurikulum)
Pusat Pengajian Umum dan Kokurikulum
01/01/2020 - 30/06/2021 Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Crashworthiness and Collisions Research Group (COLORED)
01/08/2018 - 31/07/2019 Timbalan Dekan (Kokurikulum)
Pusat Pengajian Umum dan Kokurikulum
01/08/2016 - 31/07/2018 Timbalan Dekan (Kokurikulum)
Pusat Pengajian Umum dan Kokurikulum
16/06/2016 - 15/06/2018 Timbalan Pengarah
Pusat Kokurikulum
01/02/2016 - 31/01/2017 Ketua Jabatan
Pusat Kokurikulum , Jabatan Kesukarelawan
01/02/2014 - 31/01/2016 Ketua Jabatan
Pusat Kokurikulum , Jabatan Kesukarelawan

Professional Societies

YearDescriptionRoleLevel
28/04/2023 - 28/04/2024 Institution of Mechanical Engineers
Chartered Engineer Antarabangsa
15/06/2015 - 31/12/9999 IAENG Society of Scientific Computing
Ahli Antarabangsa
15/06/2015 - 31/12/9999 IAENG Society of Mechanical Engineering
Ahli Antarabangsa
08/06/2015 - 31/12/9999 IAENG Society of Computer Science
Ahli Antarabangsa
08/06/2015 - 31/12/9999 International Association of Engineers (IAENG)
Ahli Antarabangsa
30/03/2022 - 30/03/2023 Chartered Engineer
Ahli Antarabangsa
01/10/2018 - 31/12/2020 Majlis Kokurikulum Universiti-Universiti Malaysia (UniCC)
Ahli Kebangsaan
01/01/2019 - 31/12/2020 Kementerian Dalam Negeri
Ahli Lembaga Hakim Pelawat Tahanan Khas Kebangsaan
01/01/2019 - 31/12/2020 Kementerian Dalam Negeri
Ahli Lembaga Hakim Pelawat Pusat Pemulihan Khas Kebangsaan
01/01/2023 - 31/12/2024 Majlis Kokurikulum Universiti-Universiti Malaysia (UniCC)
Ahli Kebangsaan
18/03/2017 - 31/12/9999 Jabatan Penjara Malaysia
Penguasa Penjara (SISKOR) Kebangsaan
25/03/2013 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan
01/01/2019 - 31/12/2020 Kementerian Dalam Negeri
Ahli Lembaga Hakim Pelawat Penjara Kebangsaan

Teaching Experience

YearDescriptionLevel
2021 MEKANIK PEPEJAL II [BDA20903], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 University
2020 MEKANIK PEPEJAL I [BDA10903], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 University
2020 DINAMIK [BDA20103], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 University
2019 DINAMIK [BDA20103], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 MEKANIK PEPEJAL II [BDA20903], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 University
2018 DINAMIK [BDA20103], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 MEKANIK PEPEJAL II [BDA20903], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2017 Sains Mekanikal (BEF25903), Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Mekanik Pepejal II (BDA20903), Sesi 20162017 Semester 2, Universiti Tun Hussein Onn, 2017 University
2017 Dinamik (BDA20103), Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia. 2017 University
2017 MEKANIK KEJURUTERAAN [BDU10503], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Sains Mekanikal (BEF25903), Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Mekanikal Pepejal II (BDA20903), Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Sains Mekanikal (BEF25903), Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2015 Mechanical Sciences (BEF25903), Sesi 2015/2016, Semester 1, Fakulti Kejuruteraan Elektrik dan Elektronik, UTHM, 2015 University
2015 Elasticity (MDM10203), Sesi 2014/2015, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM 2014 University
2015 Dinamik (BDA20103), Sesi 2015/2016, Semester 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2015 University
2015 Mechanical Sciences (BEF25903), Sesi 2014/2015, Semester 2, Fakulti Kejuruteraan Elektrik dan Elektronik, UTHM, 2014 University
2014 Dinamik (BDA20103), Sesi 2014/2015, Semester 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2014 University
2014 Mechanical Sciences (BEF 25903), Sesi 2014/2015, Semester 1, Fakulti Kejuruteraan Elektrik dan Elektronik, UTHM, 2014 University
2013 Dinamik (BDA2013), Sesi 2013/2014, Semester 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2013 University
2013 Mechanical Sciences (BEF25903), Sesi 2013/2014, Semester 2, Fakulti Kejuruteraan Elektrik dan Elektronik, UTHM, 2013 University
2013 Mechanical Sciences (BEF25903), Sesi 2013/2014, Semester 2, Fakulti Kejuruteraan Elektrik dan Elektronik, UTHM, 2013 University
2013 Dinamik (BDA20103), Sesi 2013/2014, Semester 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2013 University
2013 Mekanik Pepejal II (BDA20903), Sesi 2013/2014, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2013 University
2012 Computational Methods (MDM11004), Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012 University
2012 Dinamik (BDA20103), Sesi 2012/2013, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012 University
2012 Mekanik Pepejal II (BDA30303), Sesi 2012/2013, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012 University
2012 Dinamik (BDA20103), Sesi 2012/2013, Semester 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012 University
2012 Statik (BDA10203), Sesi 2012/2013, Semester 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012 University
2006 Makmal Kejuruteraan Mekanikal II (DDA2721), Sesi 2006/2007, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2006 University
2006 Makmal Kejuruteraan III (BDA2711), Sesi 2006/2007, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM , 2006 University
2006 Makmal Kejuruteraan IV (BDA2721), Sesi 2006,2007, Semester 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM , 2006 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
K331 INJURY PREDICTION OF FRONTAL IMPACT SAFETY ASSESSMENT USING A NEWLY MALAYSIAN SIZE HYBRID III ANTHROPOMETRIC TEST DEVICE FINITE ELEMENT MODEL Ketua 30/04/2024
K195 Dynamic response of AL 2024-T3 aluminium plates impacted by projectile using small and medium scale of cluster parallel computing Ahli 30/11/2023
H276 ANISOTROPIC DAMAGE CONSTITUTIVE FORMULATION OF ADVANCED HIGH STRENGTH STEELS (AHSS) FOR HIGH STRAIN RATE APPLICATION Ketua 31/10/2021
X155 Isolation and Characterization of Bamboo Nanocellulose As Reinforcement in Bioplastics Ahli 31/08/2021
X156 Determination of crashworthy guardrail system for vehicle occupant safety in crash accident Ahli 31/08/2021
U870 Characterization of Functionally Graded Natural Fiber Reinforced Polymer Composites Ahli 31/08/2019
1547 Correction on the Conventional Constitutive Formulation to Predict Three Dimensional Stress-State of Deformation Behaviour in Commercial Aluminum Alloys Undergoing High Velocity Impacts Ketua 30/04/2019
U674 Modelling inelastic behaviour of orthotropic metals in a unique alignment of deviatoric plane within the stress space Ketua 16/04/2019
U746 Characterization of damage evolution of recycled aluminium alloys (AA7010) chips undergoing finite strain deformation via experiment and constitutive model development Ketua 31/03/2019
1424 Investigations of Kenaf Fiber Reinforced Composites for Automotive Crash Energy Absorbing Structures Ahli 31/05/2016
R019 Woven Fabric Based Natural Fibers Reinforced Composites for Automotive Crashworthiness applications Ahli 15/12/2015
R011 Evaluation of novel plasticity type wear model for lifing prediction in aeroengine components. Ahli 28/02/2015
R010 Modelling of elastoplastic-damage constitutive model for plastic dynamic behaviour in automotive and earospace structures Ketua 15/12/2014
1379 Development Of An Non-Linear Computational Test-Bed Applicable For High Velocity Impact Application Of Commercial Aluminium Alloy Ketua 31/10/2014
1081 Pelaksanaan Sistem Pemakanan Ikan Dan Penilaian Prestasi Sistem Pada Keadaan Kolam Sebenar Ahli 30/07/2014
1091 Effect Of Strain Rates And Temperatures On Metatials With Pronounced Orthotropy Ketua 31/03/2014

Publications

Book
Mohd Fairuz bin Marian, , Mohd Khir bin Mohd Nor, Zalinah binti Salehon, Siti Sarawati binti HjJohar
(2019) Buku Prosedur Perlaksanaan Siswa Siswi Koreksional, UTHM , 1, ISBN:9789672306764
Ahmad Esa
(2016) Proceedngs International Conference On Social Service (Iccs) 2016, UTHM , 1, ISBN:9789670764658
Book Chapters
H.Abdullah, M.K.M.Nor, M.N.A.Hamid, N.A.Rahman, M.Z.Kasmuin, C.P.Faizul, A.H.Ibrahim, K.N.Azila
(2020) Kemahiran Insaniah Dalam Kursus Kokurikulum, Kokurikulum Dan Pembangunan Mahasiswa Holistik, Penerbit Universiti Malaysia Pahang , 39, ISBN:9789672226567
M. K. Mohd Nor, N. Maat, C. S. Ho, M. S. A. Samad
(2018) Modeling Shock Waves And Spall Failure In Composites As An Orthotropic Materials, Modelling Of Damage Processes In Biocomposites, Fibre-Reinforced Composites And Hybrid Composites, Woodhead Publishing, Elsevier , 171, ISBN:9780081022894
Kamarul-Azhar Kamarudin, Mohd Khir Mohd Nor, Al Emran Ismail, Iskandar Abdul Hamid, Ahmad Sufian Abdullah
(2018) Progressive Damage Modeling Of Synthetic Fiber Polymer Composites Under Ballistic Impact, Modelling Of Damage Processes In Biocomposites, Fibre-Reinforced Composites And Hybrid Composites, Woodhead Publishing Series in Composites Science and Engineering , 115, ISBN:9780081022894
Mohd Khir Mohd Nor
(2015) Apabila Pasukan Beruniform Berperang!, Citra Kokurikulum, UTHM , 144, ISBN:9789670764351
General Publications
Khir
(2015) Haji Dan Umrah (Uqd 10301), UTHM
Journal
M. S. Abdul Samad, M. K. Mohd Nor, M. M. Abdul Majid and K. K. Abu Kassim
(2023) Optimization Of Vehicle Pulse Index Parameters Based On Validated Vehicle-Occupant Finite Element Model, INTERNATIONAL JOURNAL OF CRASHWORTHINESS, TAYLOR AND FRANCIS LTD. , 4, 217, ISSN:13588265
M. S. Abdul Samad and M. K. Mohd Nor
(2022) A Comparative Analysis Between A Newly Malaysian Size Atd And The Current Hybrid Iii Atd In Frontal Impact, COGENT ENGINEERING, TAYLOR AND FRANCIS AS , 7, 1, ISSN:23311916
C. S. Ho, M. K. Mohd Nor, M. A. Lajis, M. S. A. Samad
(2022) Damage Characteristics Of Recycled Aluminium Alloys Aa6061 Undergoing Finite Strain Deformation Of Tensile Loading, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING , UTHM , 6, 1, ISSN:2229838X
N. Maat, C. S. Ho, M. K. Mohd Nor, M. T. Hameed Sultan
(2022) High Strain Rate Deformation Behaviour Analysis Of Recycled Aluminium Alloys Aa6061 Reinforced Alumina Oxide Al2o3 Using Taylor Cylinder Impact Test, JOURNAL OF MECHANICAL ENGINEERING, PENERBIT UITM , 12, 227, ISSN:18235514
C. S. Ho, M. K. Mohd Nor, M. S. A. Samad
(2022) Modelling Temperature And Strain-Rate Dependence Of Recycled Aluminium Alloy Aa6061, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 135, ISSN:2229838X
C. S. Ho, M. K. Mohd Nor
(2021) An Experimental Investigation On The Deformation Behaviour Of Recycled Aluminium Alloy Aa6061 Undergoing Finite Strain Deformation, METALS AND MATERIALS INTERNATIONAL, KOREAN INSTITUTE OF METALS AND MATERIALS , 12, 4967, ISSN:15989623
N. Maat, M. K. Mohd Nor, C. S. Ho
(2021) Characterisation Of Mechanical Properties, Damage Progression And Fracture Modes Of Recycled Aluminium Alloys Aa6061 Reinforced Alumina Oxide, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 9, 215, ISSN:2229838X
M. S. A. Samad, M. K. Mohd Nor, M. M. Abdul Majid, K. A. Abu Kassim
(2021) Investigation On The Effect Of Malaysian Anthropometric Size In Vehicle Crash Safety By Using Finite Element Method , JOURNAL OF THE SOCIETY OF AUTOMOTIVE ENGINEERS MALAYSIA, SOCIETY OF AUTOMOTIVE ENGINEERS MALAYSIA , 9, 449, ISSN:26008092
M. F. Kamarulzaman, M. K. Mohd Nor, M. S. A. Samad
(2021) Microstructural Analysis Of Strain Rate Dependence For Commercial Dual Phase Steel Dp590 Undergoing Finite Strain Deformation, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 9, 226, ISSN:2229838X
C. S. Ho, M. K. Mohd Nor
(2021) Tensile Behaviour And Damage Characteristic Of Recycled Aluminium Alloys Aa6061 Undergoing Finite Strain Deformation, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE, SAGE PUBLICATIONS LTD , 6, 2276, ISSN:09544062
Mohd KM Nor, Ho C Sin and Farah NA Janudin
(2020) An Experimental Study On The Deformation Behaviour And Fracture Mode Of Recycled Aluminium Alloy Aa6061-Reinforced Alumina Oxide Undergoing High-Velocity Impact, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE, SAGE PUBLISHING , 12, 4659, ISSN:09544062
C. S. Ho, M. K. Mohd Nor
(2020) Characterization Of Deformation Behaviour And Fracture Mode Of Recycled Aluminium Alloys (Aa6061) Subjected To High-Velocity Impact, JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (JMES), FACULTY OF MECHANICAL ENGINEERING, UNIVERSITI MALAYSIA PAHANG , 9, 7222, ISSN:22894659
M. K. Mohd Nor, C. S. Ho, N. Maat, M. F. Kamarulzaman
(2020) Modelling Shock Waves In Composite Materials Using Generalised Orthotropic Pressure, CONTINUUM MECHANICS AND THERMODYNAMICS, SPRINGER BERLIN HEIDELBERG , 7, 1217, ISSN:14320959
Amirul Naufal Ashaari, Kamarul-Azhar Kamarudin, Mohd Khir Mohd Nor, Mohamed Nasrul Mohamed Hatta
(2020) Numerical Simulation On Seashell Structure Subjected To Impact Using Hemispherical And Blunt Projectiles, ADVANCED RESEARCH IN NATURAL FIBERS, FAZ PUBLISHING , 12, 17, ISSN:26827409
Al Emran Ismail, Kamarul Azhar Kamarudin, Mohd Khir Mohd Nor, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim and Mohammad Zulafif Rahim
(2019) Calculating Of Stress Intensity Factors Of Soldered Joints With Multiple Cracks, INDONESIAN JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCEMULTIPLE CRACKS, IAESCORE , 4, 284, ISSN:25024752
C. S. Ho, M. A. Ab Rani, M. K. Mohd Nor, N. Maat, M. T. Hameed Sultan, M. A. Lajis, N. K. Yusuf
(2019) Characterization Of Anisotropic Damage Behaviour Of Recycled Aluminium Alloys Aa6061 Undergoing High Velocity Impact, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 247, ISSN:2229838X
Norzarina Maat, Mohd Khir Mohd Nor, Choon Sin Ho, Noradila Abdul Latif, Al Emran Ismail, Kamarul-Azhar Kamarudin, Saifulnizan Jamian, Mohd Norihan Ibrahim@Tamrin , Muhamad Khairudin Awang
(2019) Effects Of Temperatures And Strain Rate On The Mechanical Behaviour Of Commercial Aluminium Alloy Aa6061, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit Akademia Baru , 2, 21, ISSN:22897879
M. K. Mohd Nor, N. Maat, C. S. Ho
(2018) An Anisotropic Elastoplastic Constitutive Formulation Generalised For Orthotropic Materials, CONTINUUM MECHANICS AND THERMODYNAMICS, Springer Berlin Heidelberg , 3, 1, ISSN:14320959
M. K. Mohd Nor, N. Maat, C. S. Ho
(2018) Modeling Dynamic Anisotropic Behaviour And Spall Failure In Commercial Aluminium Alloys Aa7010, JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS, Springer International Publishing , 4, 1, ISSN:21997454
Kamarul Azhar Kamarudin, Mohamed Nasrul Mohamed Hatta, Ranjhini Anpalagan, Al Emran Ismail, Noor Wahida Ab Baba, Mohd Khir Mohd Noor, Rosniza Hussin, Ahmad Sufian Abdullah
(2018) Seashell Structure Under Binder Influence , JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, AKADEMIA BARU , 3, 122, ISSN:22897879
M. K. Mohd Nor, N. Ma?at, C. S. Ho, M. S. A. Samad
(2017) An Anisotropic Deformation Analysis Of Orthotropic Materials Subjected To High Velocity Impacts, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING IJMME-IJENS, IJENS Publishers , 10, 156, ISSN:2077-124X
Mohd Khir Mohd Nor, Rade Vignjevic, James Campbell
(2017) Plane-Stress Analysis Of The New Stress Tensor Decomposition, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 4, 635, ISSN:1662-7482
M. K. Mohd Nor
(2016) Modeling Inelastic Behaviour Of Orthotropic Metals In A Unique Alignment Of Deviatoric Plane Within The Stress Space, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, Elsevier , 9, In Press, ISSN:0020-7462
M. K. Mohd Nor
(2016) Modeling Of Constitutive Model To Predict The Deformation Behaviour Of Commercial Aluminum Alloy Aa7010 Subjected To High Velocity , ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , 2006-2016 Asian Research Publishing Network (ARPN). All rights reserved. , 2, 2349, ISSN:18196608
M. K. MOHD NOR
(2016) Modeling Of Constitutive Model To Predict The Deformation Behaviour Of Commercial Aluminum Alloy Aa7010 Subjected To High Velocity Impacts, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ?2006-2016 Asian Research Publishing Network (ARPN) , 2353, ISSN:18196608
M K Mohd Nor , Norzarina binti Maat
(2016) Simplified Approach To Validate Constitutive Model Formulation Of Orthotropic Materials Undergoing Finite Strain Deformation, JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Medwell Journals , 12, 2146, ISSN:1816-949x
M. K. Mohd Nor
(2016) Unique Rotation Tensor Formulation To Predict Three-Dimensional Deformation Behaviour Of Aluminum Alloy Aa7010, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, International Journals of Engineering & Sciences , 8, 70, ISSN:2227-2771
M. K. Mohd Nor
(2015) The Development Of Unique Orthogonal Rotation Tensor In The Llnl-Dyna3d For Orthotropic Materials Constitutive Model, AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, American-Eurasian Network for Scientific Information (AENSI) Publisher , 12, 22, ISSN:19918178
M. K. Mohd Nor. Mohamad Suhaimi
(2014) Effects Of Temperature And Strain Rate On Commercial Aluminum Alloy Aa5083, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 10, 332, ISSN:1662-7482
M. K. Mohd Nor, M. Z. Dol Baharin
(2014) Rollover Analysis Of Heavy Vehicle Bus, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 10, 633, ISSN:1662-7482
Mohd Khir Mohd Nor, Rade Vignjevic, James Campbell
(2013) Modelling Of Shockwave Propagation In Orthotropic Materials, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 4, 557, ISSN:1662-7482
Policy Paper
Mohd Khir Bin Mohd Nor
(2021) Prosedur Operasi Standard Semasa Dan Pasca Perintah Kawalan Pergerakan Wabak Covid-19 Untuk Pelaksanaan Kursus Kokurikulum Berkredit
Prosiding / Seminar
M. F. Kamarulzaman , N. M. Zin , M. K. Mohd Nor , M. S. A. Samad
(2022) Modelling Numerical Simulation Of Dp590 Steel Undergoing Finite Strain Deformation Of Uniaxial Tensile Test, UTHM , 380, ISBN:27734765
M. L. Issek, M. K. Mohd Nor, C. S. Ho, M. A. Lajis
(2021) Materials Characterisation And Fracture Mechanism Of Recycled Aluminium Alloy Aa6061 Reinforced With Alumina Oxide, IOP PUBLISHING LTD. , 1, ISBN:17578981
M I H Jamaludin, S Jamian, M K Awang, K A Kamarudin, M K Mohd Noor and A E Ismail
(2020) Characterization Of Continuous Gradient Functionally Graded Natural Fiber Reinforced Polymer Composites, IOP PUBLISHING LTD , 1, ISBN:1757899x
C. S. Ho, M. K. Mohd Nor, N. Maat, K. Y. Alaric Sim, M. N. Ibrahim, S. Jamian, M. A. Lajis, N. K. Yusuf
(2020) Damage Initiation And Evolution Analysis Of Hot Extruded Recycled Aluminium Alloys (Aa6061), IOP PUBLISHING , 1, ISBN:1757899X
K Maximus , J Saifulnizan, A Ismail, N Hisyamudin , M N Khir , and A K Kamarul , M K Awang
(2018) Hardness And Wear Rate Of Al Lm6 Hollow Cylinder Fabricated Using Centrifugal Method, IOP SCIENCE , 1, ISBN:17426596
S. Jamian, N.A. Nik Mohamed, A.K.A Mohd Ihsan, A.E Ismail, M.K. Mohd Nor, K.A. Kamarudin, N. H. Muhd Nor
(2017) Deflection Of Elastic Beam With Sma Wires Eccentrically Inserted, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
M K Mohd Nor, A Noordin, M F S Ruzali, M H Hussen, N Mustapa
(2017) Development Of Vehicle Model Test-Bending Of A Simple Structural Surfaces Model For Automotive Vehicle Sedan , AIP Publishing , 020031-1, ISBN:0094243X
N Ma'at, M K Mohd Nor, A E Ismail, K A Kamarudin, S Jamian, M N Ibrahim, M K Awang
(2017) Modelling Dynamic Behaviour And Spall Failure Of Aluminium Alloy Aa7010, IOP Publishing , 1, ISBN:17426588
M K Mohd Nor, C S Ho, N Maat
(2017) Nonlinear Analysis Of Collapse Mechanism In Superstructure Vehicle, AIP Publishing , 020012-1, ISBN:0094243X
Mohd Khir Mohd Nor
(2017) Oblique Crushing Performances Of Hybrid Woven Kenaf Fibre Reinforced Aluminium Hollow Cylinder, EDP Sciences , 1, ISBN:2261236X
Al Emran Ismail, Mohd Norihan Ibrahim, Saifulnizan Jamian, Kamarul-Azhar Kamarudin, Muhammad Khairudin Awang, and Mohd Khir Mohd Nor
(2017) Oblique Crushing Performances Of Hybrid Woven Kenaf Fibre Reinforced Aluminium Hollow Cylinder, EDP SCIENCES , 1, ISBN: 2261236X
M K Mohd Nor, C S Ho, N Maat
(2017) Torsion Vehicle Model Test For Automotive Vehicle, AIP Publishing , 020015-1, ISBN:0094243X
M K Mohd Nor
(2016) Collapse Mechanism Analysis In The Design Of Superstructure Vehicle, IOP Publishing Ltd , 1 , ISBN:17578981
Norashidah Abd Rahman, Mohd Khir Mohd Nor, Goh Kai Chen, Khairunesa Isa
(2016) Creating Sports Interest Among The Children Through University Community Engagement, Advanced Centre for Technical and Vocational Education (ACTive) UTHM , 34 , ISBN:9789670764658
Mohd Khir Mohd Nor
(2016) Creating Sports Interest Among The Children Through University Community Engagement Program, ACTiVE , ISBN:9789670764658
M K Mohd Nor, A Noordin, M F S Ruzali, M H Hussen
(2016) Development Of Vehicle Model Test For Road Loading Analysis Of Sedan Model, IOP Publishing Ltd , 1 , ISBN:17578981
M K MOHD NOR
(2016) Fracture Toughness Of Woven Kenaf Fibre Reinforced Composites, IOP PUBLISHING LTD , 1 , ISBN:17578981
M K Mohd Nor, N Ma'at, K A Kamarudin, A E Ismail
(2016) Implementation Of Finite Strain-Based Constitutive Formulation In Lllnl-Dyna3d To Predict Shockwave Propagation In Commercial Aluminum Alloys Aa7010, IOP Publishing Ltd , 1 , ISBN:17578981
Mohd Khir Mohd Nor
(2016) Volunteerism; Impact And Benefits, ACTiVE , ISBN:9789670764658
Applied Mechanics and Materials Journal International
(2012) Modelling Shockwave Propagation In Orthotropic Materials, Applied Mechanics and Materials Journal Internationa
Applied Mechanics and Materials Journal International
(2012) Plane-Stress Analysis Of The New Stress Tensor Decomposition, Applied Mechanics and Materials Journal International
Mohd Khir Bin Mohd Nor
(2010) Modelling Of Plastic Dynamic Behaviour In Orthotropic Metals, , July 18-20, 2011, , Penerbit UTHM

Consultancies

YearDescriptionLevel
2017 PROTON: Anisotropic Damage Constitutive Formulation of Advanced High Strength Steels (AHSS) for High Strain Rate Applications National
2017 Paper Reviewer for the 5th International Conference on Mechanical Engineering, Material Sciences and Civil Engineering ICMEMSCE2017 International
2015 Member of the IAENG Society of Computer Sciences International
2015 Paper Reviewer of 2nd International Conference on Computing Modeling, Simulation and Analysis 2015 International
2015 Member of the IAENG Society of Scientific Computing International
2015 Paper Reviewer of Malaysian Technical Universities Conference on Engineering and Technology 2015 International
2015 Member of International Association of Engineers (Member Number 156189) International
2015 Member of the IAENG Society of Mechanical Enginering International
2015 Paper Reviewer of International Journal of Plasticity International
2014 Pelaksanaan Sistem Pemakanan Ikan dan Penilaian Prestasi Sistem Pada Keadaan Kolam Sebenar, 2012-2014 University
2012 Perunding bagi Projek Latihan Pra Penempatan Tenaga Pengajar Batch 2-Kursus Teknikal Teras (Siri 2), Kolej Kemahiran Tinggi Mara, Kemaman, Julai 2012 Government
2012 Paper Reviewer of International Conference Mechanical and Manufacturing Engineering 2012 International

Supervision

YearDescriptionRole
2021 Supervisor for Irfan Alias Farhan Latif . PhD. Universiti Tun Hussein Onn Malaysia. 2021 Supervisor
2021 External Examinar for Chow Zen Pei. PhD. Universiti Teknologi Malaysia. Oktober 2021 External Examiner
2019 Supervisor for Mohd Syazwan bn Abdul Majid. PhD. Universiti Tun Hussein Onn Malaysia. 2019 Supervisor
2019 External Examinar for Ali Ahmad bin Mazlan. Masters by Research. Universiti Putra Malaysia. October 2019 External Examiner
2018 Supervisor for Muhammad Faredzuan bin Kamarulzaman. PhD. UTHM. 2018 Supervisor
2018 External Examinar for Khairul Izwan Ismail. Masters by Research. Universiti Putra Malaysia. July 2018 External Examiner
2017 Supervisor for Norzarina binti Ma'at. PhD. UTHM 2017 Supervisor
2017 Supervisor for Muhammad Faredzuan bin Kamarulzaman. Master. UTHM. 2017 Supervisor
2016 Supervisor for Ho Choon Sin. PhD. UTHM 2016 Supervisor
2016 Supervisor for Norzarina binti Ma'at, Sarjana Penyelidikan, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2015 Supervisor for Mohd Ridhwan Bin Salleh, PSM, Universiti Tun Hussein Malaysia, 2015 Supervisor
2015 Supervisor for Mohd Sallehudin Bin Mohd Azmi, PSM, Universiti Tun Hussein Malaysia, 2015 Supervisor
2015 Supervisor for Abdul Afif Azfar Bin Ahmad Kamal, PSM, Universiti Tun Hussein Malaysia, 2015 Supervisor
2015 Penilai Seminar Projek Sarjana Muda 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2015 Assessor
2015 Penilai Kolokium Sarjana Penyelidikan Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2015 Assessor
2015 Supervisor for Muhammad Hafeez Bin Hussen, PSM, Universiti Tun Hussein Malaysia, 2015 Supervisor
2015 Penilai Kolokium PhD Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2015 Assessor
2015 Penilai Seminar Projek Sarjana Muda 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2015 Assessor
2015 Penilai Projek Sarjana Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2015 Assessor
2014 Penilai Seminar Projek Sarjana Muda 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014 Assessor
2014 Penilai Seminar Projek Sarjana Muda 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014 Assessor
2014 Penilai Kolokium Sarjana Penyelidikan Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014 Assessor
2014 Juri Pertandingan Roket Air 2014 Kategori Trajectory Menengah anjuran Fakulti Kejuruteraan Mekanikal dan Pembuatan dengan kerjasama Pejabat Pelajaran Daerah Batu Pahat, 2014 Referee
2014 Supervisor for Muhammad Zulhusmi bin Dol Bahrin, Master, UTHM, 2014 Supervisor
2014 Supervisor for Anis Binti Noordin, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Ibrahim Bin Mohamad Shuhaimi, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Mohd Fathi Syahid bin Ruzali, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Hassan Syarqawi Bin Ahmad Tajudin, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Akmal Bin Anuar, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Mohamad Amierull Bin Md Borhanudin, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Muhamad Hafizuddin Bin Baharom, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Mohamad Shahrin, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Zulhusmi Bin Dol Baharin, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Supervisor for Ibnu Anas, PSM, Universiti Tun Hussein Malaysia, 2014 Supervisor
2014 Penilai Kolokium PhD Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014 Assessor
2014 Penilai Projek Sarjana Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014 Assessor
2013 Penilai Projek Sarjana Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013 Assessor
2013 Supervisor to Rohani Binti Saad, PSM, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Nurul Aiman Binti Ab Muntalib, Sarjana Penyelidikan, UTHM, 2012 Supervisor
2013 Penilai Kolokium PhD Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013 Assessor
2013 Penilai Seminar Projek Sarjana Muda 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013 Assessor
2013 Penilai Seminar Projek Sarjana Muda 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013 Assessor
2013 Penilai Kolokium Sarjana Penyelidikan Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2013 Assessor
2013 Juri Pertandingan Roket Air 2014 Kategori Trajectory Menengah anjuran Fakulti Kejuruteraan Mekanikal dan Pembuatan dengan kerjasama Pejabat Pelajaran Daerah Batu Pahat, 2013 Referee
2012 Penilai Seminar Projek Sarjana Muda 2, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012 Assessor
2012 Penilai Projek Sarjana Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012 Assessor
2012 Penilai Kolokium Sarjana Penyelidikan Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012 Assessor
2012 Penilai Kolokium PhD Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012 Assessor
2012 Penilai Seminar Projek Sarjana Muda 1, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012 Assessor

Extension & Public Services

YearDescriptionLevel
2017 Commandant for Siswa Siswi Koreksional (SISKOR) UTHM National
2017 President, Kelab Badmintton Staf, UTHM University
2017 Pengerusi Badan Rekreasi dan Kebajikan Staf (BERKAT) PPUK University
2017 Ahli Majlis Kokurikulum Universiti Awam Malaysia National
2016 Pengerusi Badan Rekreasi dan Kebajikan Staf (BERKAT) PPUK University
2016 President, Kelab Badmintton Staf, UTHM University
2015 President, Kelab Badmintton Staf, UTHM University
2015 Pengurus Kelab Badminton Staf UTHM University
2015 Penyelaras Perhimpunan Pagi dan Pertandingan Kawad Kaki Badan Beruniform UTHM, 2015 University
2015 Penyelaras Pertandingan Pidato Semarak Patriotik Universiti Awam Malaysia, Anjuran Pusat Kokurikulum UTHM dengan Kerjasama UNICC dan Kementerian Pengajian Tinggi, 2015 National
2015 Atlit Sepaktakraw UTHM, Karnival Sukan Staf Universiti-Universiti Awam Malaysia, Universiti Teknologi MARA, SUKUM 2015 National
2015 Atlit Badminton UTHM, Karnival Sukan Staf Universiti-Universiti Awam Malaysia, Universiti Teknologi MARA, SUKUM 2015 National
2015 Pengerusi Program Luar University Community Engagement UCE bagi Kursus Badan Beruniform, Pusat Kokurikulum UTHM, 2014-2015 University
2015 Penyelaras 5S Pusat Kokurikulum, 2014-2015 University
2015 Penyelaras Program Continuous Personal Revival Badan Beruniform UTHM, 2015 University
2015 Penyelaras Kembara Sukarelawan Badan Beruniform UTHM, 2015 University
2015 AJK Persidangan Antarabangsa Kuliah Kerja Nyata - Khidmat Masyarakat (KKN-KM 2016) Kelestarian Biodiversiti dan Lawatan Staf Wanita Universiti Tun Hussein Onn Malaysia International
2015 Penyelaras Fiesta Kokurikulum Mahasiswa FIESKOM, Pusat Kokurikulum UTHM, 2015 University
2015 AJK Penentuan Teknikal Sebutharga dan Tender, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2015 University
2015 AJK Penyediaan Dokumen Akreditasi 2015, Fakulti Kejuruteraan Mekanikal dan Pembuatan University
2014 Penyelaras Perhimpunan Pagi dan Pertandingan Kawad Kaki Badan Beruniform UTHM, 2014 University
2014 Penyelaras Program Tangisan Al Aqsa dengan kerjasama Aqsa Sharif dan Aman Palestin, 2014 University
2014 Penyelaras Pameran Badan Beruniform UTHM dan Ceramah Kesukarelawanan, 2014 University
2014 Penyelaras Majlis Perasmian Bangunan Pusat Kokurikulum oleh Tan Sri Ali Hamsa KSN, 2014 University
2014 Penyelaras Fiesta Kokurikulum Mahasiswa FIESKOM, Pusat Kokurikulum UTHM, 2014 University
2014 Ahli Turut Hadir Jawatankuasa Kecil Penasihatan Akademik Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2014 University
2014 Penolong Penyelaras Jawatankuasa Pengajian Siswazah, Fakulti Kejuruteraan Mekanikal dan Pembuatan UTHM, 2013-2014 University
2014 Speaker "Volunteerism; Impact and Benefits" bagi Kursus Penolong Jurulatih Pengakap Kebangsaan National
2013 AJK Pembangunan Program Akademik Sarjana Sains Teknologi Maritim, Pusat Pengajian Siswazah, UTHM, 2013 University
2013 AJK Khas Penyediaan Dokumen MQA02 Bagi Tujuan Akreditasi Penuh Program Pasca Siswazah, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012-2013 University
2013 AJK Pemurnian Laman Web Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2013 University
2013 Penyelaras Program Pesisir Peringkat Fakulti, Semester I Sesi 2013/2014 University
2013 Atlit Sepaktakraw UTHM, Karnival Sukan Staf Universiti-Universiti Awam Malaysia, Universiti Kebangsaan Malaysia, SUKUM 2013 National
2013 Penyelaras Kursus Metodologi Penyelidikan Semester II, Sesi 2012/2013, Program Sarjana Kejuruteraan Mekanikal Secara Kerja Kursus University
2013 Penyelaras Kursus Metodologi Penyelidikan Semester I Sesi 2013/2014 Program Sarjana Kejuruteraan Mekanikal Secara Kerja Kursus University
2012 AJK Khas Majlis UNESCO International Civil Aviation Day, 2012 University
2012 Petugas Sempena Pendaftaran Pelajar Baru Kemasukan Semester I, Sesi 2012/2013 University
2012 Pengerusi bagi Pembentangan Projek Sarjana I dan II bagi Semester II Sesi 2011/2012 University
2012 Pengerusi bagi Kolokium Pasca Siswazah 2012 (Penyelidikan) Semester II, Sesi 2011/2012 University
2012 Auditee Program Audit Dalaman ISO 9001:2008, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 2012 University
2012 AJK Pelaksana (Ketua Unit Penerbitan) sempena 1st National Technological Exposition on Rural Innovation 2012, Tech-Rural 2012 National
2012 Pengerusi bagi Kolokium Pasca Siswazah 2012, (Penyelidikan) Semester I, Sesi 2012/2013 University
2012 Penyelaras Kursus untuk Semester I, Sesi 2012/2013, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2012 University
2007 Atlit Sepaktakraw UTHM, Karnival Sukan Staf Universiti-Universiti Awam Malaysia, Universiti Malaysia Perlis, SUKUM 2007 National

Courses & Training

YearDescription
Organiser / Venue		Date
2023 MAJLIS ANUGERAH BITARA KIRANA 2023
PEJABAT PENDAFTAR,UTHM / DEWAN SULTAN IBRAHIM 		22/08/2023
2023 UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (LEADING WITH INTEGRITY AND ETHICS)
UTHM / THE KATERINA HOTEL 		02/08/2023
2023 PROGRAM INDUSTRIAL TALK BERSAMA PENASIHAT INDUSTRI PPUK
UTHM / AUDITORIUM GALERI ILMU 		21/05/2023
2023 BENGKEL PERANCANGAN STRATEGIK KOKURIKULUM 2023
UTHM / GREEN KING'S HOTEL, MELAKA 		20/03/2023 - 22/03/2023
2023 BENGKEL TRAINING OF TRAINERS (TOT) PENGAJAR KURSUS KOKURIKULUM BERKREDIT SEM II SESI 2022/2023
UTHM / The Katerina Hotel, Batu Pahat 		18/03/2023
2022 INTERNATIONAL CONFERENCE AND EXPOSITION ON INVENTIONS BY INSTITUTIONS OF HIGHER LEARNING (PECIPTA 2022)
KEMENTERIAN PENGAJIAN TINGGI (KPT) / DEWAN TUANKU CANSELOR, UNIVERSITI MALAYSIA KELANTAN 		01/11/2022 - 03/11/2022
2022 BENGKEL TRAINING OF TRAINERS (TOT) PENGAJAR KOKURIKULUM SEMESTER I SESI 2022/2023
UTHM / NEW YORK HOTEL, JOHOR BAHRU 		06/10/2022 - 08/10/2022
2022 UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (PENGURUSAN KEWANGAN EKSEKUTIF)
UTHM / THE KATERINA HOTEL 		24/08/2022
2022 UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (PENGURUSAN KEWANGAN EKSEKUTIF)
UTHM / THE KATERINA HOTEL 		23/08/2022
2022 SESI PERKONGSIAN ILMU TENTANG PENGENALAN KEPADA HARTA INTELEK SIRI 1
LAIN-LAIN / Google Meet 		18/04/2022
2022 TAKLIMAT PEMANTAPAN KURIKULUM AKADEMIK, KURSUS MPU, KOKURIKULUM DAN PROGRAM PASCA SISWAZAH PPUK
UTHM / APLIKASI ZOOM 		16/03/2022
2022 BENGKEL PERSEDIAAN PENGAJAR KURSUS KOKURIKULUM BERKREDIT SEMESTER II SESI 2021/2022
UTHM / KEDIAMAN/RUANG BERTUGAS MASING-MASING 		11/03/2022
2022 MALAYSIAN TECHNOLOGY EXPO MTE2022 VIRTUAL INTERNATIONAL INNOVATION AWARDS
LAIN-LAIN / VIRTUAL 		03/03/2022 - 07/03/2022
2022 BENGKEL PERANCANGAN STRATEGIK KOKURIKULUM 2022
UTHM / ONLINE GOOGLE MEET 		17/02/2022
2021 WEBINAR INTEGRITI ETIKA KERJA BERKAITAN PERANAN PENYELIA
PEJABAT PENDAFTAR,UTHM / GOOGLE MEET 		06/12/2021
2021 KURSUS AUTODESK REVIT STRUCTURE ESSENTIAL TRAINING
UTHM / UTHM 		14/11/2021 - 16/11/2021
2021 MAJLIS SAMBUTAN MAULIDUR RASUL PERINGKAT UNIVERSITI TAHUN 1443H/2021M
PUSAT ISLAM, UTHM / MASJID UTHM 		18/10/2021
2021 BENGKEL TRAINING OF TRAINERS PENGAJAR KOKURIKULUM PPUK
UTHM / APLIKASI ZOOM 		01/10/2021 - 02/10/2021
2021 TUTORIAL PANDUAN PENGISIAN MAKLUMAT KENAIKAN PANGKAT STAF AKADEMIK (LALUAN PENYELIDIKAN)
PEJABAT PENDAFTAR,UTHM / APLIKASI ZOOM 		06/09/2021
2021 11TH INTERNATIONAL CONFERENCE IN MECHANICAL AND MANUFACTURING ENGINEERING 2021 (ICME '21)
UTHM / Secara atas talian 		25/08/2021 - 26/08/2021
2021 TAKLIMAT PENGISIAN LAPORAN PRESTASI GERAN PENYELIDIKAN DANA KEMENTERIAN PENGAJIAN TINGGI (DPKPT) DI MYGRANTS
UTHM / Pautan Google Meet 		11/08/2021
2021 JERAYAWARA PENULISAN TESIS SECARA INDUSTRI
UTHM / - 		03/03/2021
2021 SESI TAZKIRAH SESI 2 ANJURAN BERKAT PPUK
UTHM / GOOGLE MEET 		25/02/2021
2021 PROGRAM BUAL BICARA MYFKMP 2.0: PROSES DAN SISTEM KENAIKAN PANGKAT STAF AKADEMIK UTHM 2022
FKMP,UTHM / ZOOM 		27/01/2021

« Back