Staff Profile

Full NamePROF. MADYA Dr. HARIATI BINTI MOHD TAIB @ TAIB
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR)
Email
Designation DS54 - PROFESOR MADYA

Field of Expertise

Field Category (KPT) MATERIAL SCIENCES
Field (KPT) Advanced Materials
Field of Specialization (KPT) Ceramics

Areas of Research Interest

1. Ceramic Coatings and Deposition
2. Porous Ceramic Body Fabrication
3. Engineering Materials Characterisation (X-Ray Techniques and Microscopy)
4. Electrophoretic Deposition of Ceramics

Academic Qualification

YearQualificationInstitution
2009 DOKTOR FALSAFAH MATERIALS SCIENCE AND ENGINEERING THE UNIVERSITY OF NEW SOUTH WALES
2003 SARJANA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA
2002 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA

Professional Appointments

DS54 - Profesor Madya

Management Experience

DateDescription
01/04/2015 - 30/04/2017 Ketua Jabatan
Pusat Pembangunan Dan Latihan Akademik, Jabatan E-Pembelajaran dan Latihan (JeLA)
01/01/2013 - 31/12/2014 Ketua Pejabat
Pejabat PNC (Hubungan Industri Dan Masyarakat), Pejabat Hubungan Universiti Dan Industri
01/01/2013 - 31/12/2014 Ketua Jabatan (Hubungan Korporat & Industri)
Pejabat PNC (Hubungan Industri Dan Masyarakat), Pejabat Hubungan Universiti Dan Industri

Professional Societies

YearDescriptionRoleLevel
01/12/2016 - 31/12/9999 Microscopy Society Malaysia (MSM)
Ahli Kebangsaan
18/11/2011 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2016 Sains Bahan [BNR10102], Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia University
2015 Sains Bahan untuk Teknologi Tekstil [BNH10102], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia University
2015 Sains Bahan [BNR10102/BNJ10102] Sesi 2015/2016 Semester 2, Universiti Tun Hussein Onn Malaysia University
2013 Komposit [BDB4073/40703], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Komposit [BDB40703/4073], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2011 Seramik Termaju [MDB10504], Sesi20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Sains Bahan [BDA1602], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Sains Bahan [BDA1032/BDA10302], Sesi20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2010 Makmal Kejuruteraan I [BDA2701], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Sains Bahan [BDA 1032], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2009 Sains Bahan [DDA2053] Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Pemilihan Bahan [BDA2042], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Sains Bahan [BDA 1602], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Sains Bahan [BDA1602], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Pemilihan Bahan [BDA 2042], Sesi 20092010 Semester 1, Program SLDN, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Pemilihan Bahan [BDA2042], Sesi20092010 Semester 1, SLDN, 2009 Government
2004 Makmal Kejuruteraan II [BKM 2141], Sesi 20032004 Semester 2, Universiti Tun Hussein Onn Malaysia, 2004 University
2003 Makmal Kejuruteraan II [BKM 2141], Sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia, 2003 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
H375 Fabrication of SOFC components via Screen Printing Technique for Metal-Supported Solid Oxide Fuel Cell (MS-SOFC) Ahli 31/12/2020
M001 Metal Supported Solid Oxide Fuel Cell (MS-SOFC) Ahli 31/07/2020
U880 An Explorations Study of The Current Practices, Adoption, And Barriers of 3D Printing Technology For Biomedical Products in Malaysia Ahli 31/08/2019
1585 Interactions Between Electrophoretically Deposited BSCF-SDCC Cathode on Ferritic Stainless Steel SOFC Interconnect Ahli 31/07/2019
1593 Fundamental Study on Novel Silica-Nickel Oxide Foam Fabrication As Methane Reforming Catalyst Ketua 31/07/2019
U748 Fabrication of ferritic stainless steel interconnector layer for solid oxide fuel cell (SOFC via electropheretic deposition Ahli 31/03/2019
U553 Mechanical Strength Augmentation With Glass Synthesis Of Volca Life Energy Comb Incorporate Far Infraded Technology And Negative Ion Data Analytic Ahli 31/05/2018
U744 The effects of SiO2 derived from rice husk compositions and sintering temperature on the fabrication of SiO2-NiO foam Ketua 31/03/2018
U747 Fabrication silica from green waste materials to produce silica foam via powder metallurgy technique Ahli 31/03/2018
U294 Fabrication of Naturally Derived Silica Foam via Powder Metallurgy Technique for Water Treatment Purposes Ketua 31/01/2018
U468 Fabrication of Rice Husk Denred Silica Powder to Foam Via Powder Metallugy Technique Ketua 28/02/2017
1450 The Use Of Materials Science Knowledge To Sanitaryware And Tableware Manufacturing Process Ahli 31/12/2016
1419 New Approach of Preparation Bioactive Surface Layer on Gel Oxidised Titanium Ketua 31/08/2016
U285 Optimization of The Processing Parameters for Physical and Machanical Properties of Crystalline Silica Foams Using Compaction and Slurry Method Ahli 31/07/2016
A022 High Performance Polymeric Materials Ahli 29/02/2016
E027 Low Temperature Formation Of Zinc Oxide (Zno) Nanostructure For Solar Cells Application Ahli 29/02/2016
R022 Vibration Damping Properties by Utilisation of Quartz Filled Polysiloxane Ketua 15/09/2015
E028 An Investigation Of Stainless Steel (SS316L) And Cobalt Chromium (Cocr) Foam For Orthopaedics Application By Using Powder Metallurgy Routes Ahli 31/08/2015
A035 Site Infrustructure Module (SIM SERVER)- Server Box Insulation for Noise and Vibration Absorption Ahli 30/06/2015
1273 Vibration Damping Properties by Utilisation of Quartz Filled Polysiloxane Ahli 01/11/2014
1375 Polysiloxane Filled Silica Sheet Using Casting Technique Ketua 31/10/2014
1103 Development Of Nano Composite LSCF Cathode Carbonate For Solid Oxide Fuel Cell (SOFC) Ahli 30/09/2014
1152 Preparation And Characterisation Of Titania - Silica (TiO2-SiO2) Photocalytic Beads Ketua 30/09/2014
0746 Consolidation of Ceramic Porous Membrane Via Different Fabrication Methods Ahli 31/05/2013
0747 Deposition Of Stanum (Iv) Oxide Catalyst On Alumina Foams For Emission Abatement System Ketua 28/02/2013
0951 Deposition Of Stanum (IV) Oxide On Alumina Foams VIA Electrophoretic Deposition (EPD) Ketua 28/02/2013
0782 Synthesis of tin oxide (SnO2) via sol-gel route Ketua 14/06/2012

Publications

Book Chapters
Hariati Binti Mohd Taib @ Taib
(2011) Hydroxyapatite And Other Biomedical Coatings By Electrophoretic Deposition, Biological And Biomedical Coatings Handbook, CRC Press Taylor & Francis Group , 81, ISBN:9781439849958
Journal
Ainul, H.M.Y. , Salleh, S.M., Halib, N., Taib, H., Fathi, M.S.
(2018) Analysis Of Toothbrush Rig Parameter Estimation Using Different Model Orders In Real-Coded Genetic Algorithm (Rcga) , INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation Publisher of International Academic Journals , 11, 443, ISSN:2227524X
M. Azham Azmi, S. M. Yahya, S. Ahmad, S. Mahzan, M. Taib, H. A. Rahman, H. Taib
(2018) Effect Of Silica (Sio2) Filler On Thermal Stability Of Polysiloxane Composites, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit akademia baru , 8, 117, ISSN:22897879
Muhammad Ikhmal Hanapi, Sufizar Ahmad, Hariati Taib and Tan Chee Chen
(2018) Effect Of Sintering Temperature And Ar Glass Addition Towards Physical Properties Of Porcelain Clay For Sewer Pipes Application, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 83, ISSN:2229838X
R. Muda, M. Azham Azmi, Shahruddin Mahzan, Hatem Mostafa Elwalwal, S. Ahmad, H. Taib
(2018) Effect Of Sio2 Solid Loading And Sintering Temperatures On The Physical Properties Of Sio2-Nio Foam, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 11, 37, ISSN:10139826
N.A. Nazaruddin, S. Ahmad, H. Taib, S. Mahzan, S. Adzila and HATEM Mostafa Elwalwal
(2018) Effect Of Various Solid Loadings In Producing Silica-Nickel Oxide (Sio2-Nio) Foams, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 9, 50, ISSN:16629795
K.H.Tan, H.A.Rahman, H.Taib and M.F.Sazali
(2018) Electrophoretic Deposition Of Ba0.5sr0.5co0.8fe0.2o3?Deltasdc Carbonate Composite Coating On Solid Oxide Fuel Cell Interconnect, MALAYSIAN JOURNAL OF MICROSCOPY, Microscopy Society of Malaysia (MSM) , 12, 88, ISSN:18237010
H.Taib, P.S. Abdul Rahim, M. S .Shamsudin, Rizamarhaiza M., N. A. Nazaruddin, M. Azham Azmi, S. Mahzan, S. Ahmad
(2017) The Effect Of Nickel Oxide (Nio) Compositions In Consolidation Of Silica-Nickel Oxide (Sio2-Nio) Foams Using Replication Method, JOURNAL OF MECHANICAL ENGINEERING, Institut Pengurusan Penyelidikan (RMI), Universiti Teknologi MARA , 12, 63, ISSN:18235514
Syazwani Baharom, Sufizar Ahmad, Hariati Taib, and Rizamarhaiza Muda
(2016) The Effects Of Composition And Sintering Temperature On The Silica Foam Fabricated By Slurry Method , AIP CONFERENCE PROCEEDINGS, American Institute of Physics Publishing LLC , 7, 020004-1, ISSN:0094-243X
Mohd Azham Azmi, Mohd Syahmi Muin @ Marsayid, Shahruddin Mahzan, Sufizar Ahmad, Hariati Taib
(2016) Vibration Exposure Analysis Of Polydimethylsiloxane Reinforced Silica Derived Rice Husk Ash, MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, Faculty of Science and Technology, Universiti Kebangsaan Malaysia , 7, 1138, ISSN:13942506
Mohd Azham Azmi, Mohd Syahmi Muin @ Marsayid, Shahruddin Mahzan, Sufizar Ahmad, Hariati Taib
(2016) Vibration Exposure Analysis Of Polydimethylsiloxane Reinforced Silica Derived Rice Husk Ash [Kajian Pendedahan Getaran Terhadap Polidimetilsiloksana Yang Diperkuat Silika Dari Abu Sekam Padi], MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, The Malaysian Analytical Sciences Society , 1144, ISSN:1394-2506
S. M. Yahya, A. Azmi, M. I. Idris, M. Z. Yunos, S. Mahzan, S. Ahmad, H. Taib
(2014) Short Review: Role Of Metal Oxides As Filler In Polysiloxane Sheet Composite, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 27, ISSN:16627482
Shahruddin Mahzan, Mohd Azham Azmi, Hariati Taib and Nurul Emi Nur Ain Mohammad
(2014) Vibration Exposure Analysis Of The Polysiloxane Reinforced With Rice Husk Silica, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 11, 531, ISSN:16627482
Prosiding / Seminar
M. Azham Azmi, S. Mahzan, S. Ahmad, S.M. Salleh, H.A. Rahman, M.A.Choiron, A. Ismail, H.Taib
(2019) Vibration Exposure Of Polydimethylsiloxane (Pdms) Reinforced Silica (Sio2): Comparison Of Different Source Of Silica (Sio2) As Filler, IOP PUBLISHING LTD. , 1, ISBN:17578981
N.I.Omar, K.H.Tan, H.Taib and H.A.Rahman
(2018) Electrophoretic Deposited Lscf-Sdcc-Ag Cathode Coating On Ferritic Stainless Steel Interconnect For Sofc, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Tan K.H., Rahman H.A., Taib H., Ahmad S., Yusop U.A. and Ibrahim H.
(2018) Influence Of Heat Treatment And Milling Speed On Phase Stability Of Ba0.5sr0.5co0.8fe0.2o3-? Composite Cathode Solid Oxide Fuel Cell, TRANS TECH PUBLICATIONS, SWITZERLAND , 66, ISBN:16629795
Rizamarhaiza.M, S. Ahmad, H.A.Rahman, H.Taib
(2018) The Effect Of Sintering Temperature On Silica Derived From Rice Husk Ash - Nickel Oxide (Sio2-Nio) Foam Fabrication Via Slurry Technique, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Ong Pauline, Hariati Taib, Mohd AzwirAzlan, Nurul Fitriah Nasir, Mohd Azham Azmi, Saliha Md Salleh, Badrul Aisham Md Zain, Shahruddin Mahzan, Muhd Hafeez Zainulabidin, Sufizar Ahmad, Nasrull Abd Rahman, Zamani Ngali, Hamimah Abd Rahman
(2017) Assessment And Evaluation For Programme Learning Outcomes In Faculty Of Mechanical And Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, IOP Science , 1, ISBN:1757-899X
H. Taib, S M Salleh, B A Md Zain, M.A. Azlan, S. Mahzan, Hafeez Z A, Ong, P., S. Ahmad, M. N.A Rahman, N.F. Nasir, M. Azham Azmi, H.A Rahman, Z.Ngali
(2017) Programme Learning Outcomes Assessment And Continuous Quality Improvement In Faculty Of Mechanical And Manufacturing, Uthm, Institute of Physics Publishing , 1, ISBN:17578981
Azmi, M.A., Ismail, N.A.A., Rizamarhaiza, M., Hasif, A.A.K.W.M., Taib, H.
(2016) Characterisation Of Silica Derived From Rice Husk (Muar, Johor, Malaysia) Decomposition At Different Temperatures, AIP Publishing , 020005 , ISBN:978-073541414-3
Rahman H.A
(2013) Effect Of Zeta Potential Of Stanum Oxide (Sno2) On Electrophoretic Deposition (Epd) On Porous Alumina, Trans Tech Publications , 334, ISBN:3037858117
F. M. Noor, M. I. M. Zain, K. R. Jamaludin, R. Hussin, Z. Kamdi, A. Ismail, S. Ahmad, H. Taib
(2013) Potassium Bromide As Space Holder For Titanium Foam Preparation, Trans Tech Publications, Switzerland , 922 , ISBN:978-303785933-9

Supervision

YearDescriptionRole
2015 Supervisor for Rizamarhaiza binti Mida, PhD, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Wan Mohd Hasif Al-Haziq bin Ahmad Kamal, MSc, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Examiner for Thesis: Muhamad Subri bin Abu Bakar (2015) DEVELOPMENT OF COMPOSITE CATHODE La0.6Sr0.4Co0.2Fe0.8O3-[ SDCC-Ag FOR LOW TEMPERATURE SOLID OXIDE FUEL CELL (LTSOFC) Examiner
2013 Supervisor for Tan Kwok Joon, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Putrimaz binti Hamid, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Rizamarhaiza binti Muda, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Mohd Rizal bin Mohd Tahir, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Mohd Azham bin Azmi, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Co-Supervisor for Sufiah binti Mohamad Yahya, MEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Mohd Shukri bin Md Isa, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2012 Supervisor for Siti Noriah binti Othman, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Zurina binti Ismaili, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Syazwan Liyana binti Sulaiman, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Norzamirsaufi bin Ahmad, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Masitah binti Isahak, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nor Amira binti Adull Manan, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Muhamad Nazeri Tumiry, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2011 Supervisor for Norazam bin Abdul Wahid, BEng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Ng Chun Lin, BEng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Hamdi bin Ismail, BEng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Siti Alwani binti Ab Aziz@Kamarulzaman, MEng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Roslina binti Johor, BEng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2010 Supervisor for Muhammad Yusuf Qadri Amat Jupri, BEng, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Nor Azrina bini Resali, BEng, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Siti Alwani binti Ab Aziz@Kamarulzaman, BEng, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Noor Arina binti Noor Rashid, BEng, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Nursiah binti Ghazali, BEng, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2009 Supervisor for Nurain Zainal Abidin, BEng, Universiti Tun Hussein Onn Malaysia, 2009 Supervisor

Extension & Public Services

YearDescriptionLevel
2015 Majlis Ketua-ketua Penyelaras E-Pembelajaran IPTA Malaysia (MEIPTA), Kementerian Pendidikan Negeri, 2015-2016 National
2010 Reviewer for National Conference for Advanced Materials and Manufacturing Engineering, 2010 University
2009 Secretary, Executive Committee for National Conference on Advanced Material and Manufacturing Engineering, 2009 University
2009 Secretary, Executive Committee for International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011) University

« Back