Staff Profile
Full Name | PROF. Dr. KHALID BIN HASNAN |
---|---|
Faculty | FAKULTI TEKNOLOGI KEJURUTERAAN |
Department | JABATAN TEKNOLOGI KEJURUTERAAN PENGANGKUTAN |
Designation | DS53 - PENSYARAH SANJUNG |
PENYELIDIK UTAMA PUSAT KECEMERLANGAN INDUSTRI - REL (ICOE-REL) INSTITUT KEJURUTERAAN INTEGRASI |
Field of Expertise
Field Category (KPT) | TRANSPORT |
---|---|
Field (KPT) | Ground Transport |
Field of Specialization (KPT) | Ground Transport |
Areas of Research Interest
1. | Modelling and Simulation |
2. | Automation and Robotics |
3. | Railway Vehicle Dynamics |
Innovation Field of Interest
1. | Automation and Robotics |
2. | Railway Vehicle Safety |
Academic Qualification
Year | Qualification | Institution |
---|---|---|
2006 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | SHEFFIELD HALLAM UNIVERSITY |
1992 | SARJANA KEJURUTERAAN MEKANIKAL (AUTOMOTIF) | UNIVERSITY OF SOUTHAMPTON |
1985 | DIPLOMA TEKNOLOGI PENDIDIKAN | UNIVERSITI KEBANGSAAN MALAYSIA |
1983 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITY OF BIRMINGHAM |
Professional Appointments
DS53 - Pensyarah Sanjung |
Management Experience
Date | Description |
---|---|
01/02/2021 - 31/01/2025 | Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Kecemerlangan Industri - Rel (ICOE-REL) |
01/11/2019 - 31/10/2024 | Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Kecemerlangan Industri - Rel (ICOE-REL) |
01/11/2019 - 10/10/2020 | Ketua Pusat
Institut Kejuruteraan Integrasi, Pusat Kecemerlangan Industri - Rel (ICOE-REL) |
01/11/2017 - 31/10/2019 | Ketua Pusat
Institut Kejuruteraan Integrasi, Pusat Kecemerlangan Industri - Rel (ICOE-REL) |
01/11/2017 - 31/10/2019 | Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Kecemerlangan Industri - Rel (ICOE-REL) |
01/07/2017 - 30/10/2017 | Ketua Jabatan
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Pengangkutan |
16/05/2015 - 15/05/2016 | Ketua Program
Pusat Pengajian Siswazah |
01/06/2014 - 31/05/2015 | Ketua Jabatan
Pusat Pengajian Siswazah |
01/06/2014 - 31/05/2015 | Ketua Program
Pusat Pengajian Siswazah |
16/03/2012 - 13/03/2014 | Ketua Program
Pusat Pengajian Siswazah |
01/08/2008 - 31/07/2009 | Timbalan Dekan (Penyelidikan & Pembangunan)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan |
01/05/2008 - 31/07/2008 | Timbalan Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan |
01/09/2006 - 30/04/2008 | Timbalan Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
01/05/2006 - 30/04/2008 | Ketua Pusat
Pejabat Canselori, Pusat Pemindahan Teknologi (TTC) |
Professional Societies
Year | Description | Role | Level |
---|---|---|---|
01/01/2010 - 31/12/2010 | The Institution of Engineers, Malaysia (IEM)
| GRADUATE MEMBER | Kebangsaan |
01/01/2011 - 31/12/2011 | The Institution of Engineers, Malaysia (IEM)
| GRADUATE MEMBER | Kebangsaan |
01/01/2013 - 31/12/2013 | The Institution of Engineers, Malaysia (IEM)
| AHLI | Kebangsaan |
01/01/2014 - 31/12/2014 | The Institution of Engineers, Malaysia (IEM)
| AHLI | Kebangsaan |
01/01/2015 - 31/12/2015 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
01/01/2022 - 31/12/2022 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
26/12/2017 - 31/12/2018 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
01/01/2019 - 31/12/2019 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
01/01/2020 - 31/12/2020 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
01/01/2021 - 31/12/2021 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
01/01/2016 - 31/12/2016 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
Teaching Experience
Year | Description | Level |
---|---|---|
2015 | MDC 10203 Modelling & Simulation, Sesi 2014/15 Semester 2, UTHM, 2015 | University |
2014 | Masters Railway CGR10403 Rolling Stock & Traction System, Sesi 2014/15 semester 1, UTHM, 2014 | University |
2014 | MDC 10203 Modelling & Simulation, Sesi 2014/15 Semester 1, UTHM, 2014 | University |
2014 | MDC 10203 Modelling & Simulation, Sesi 2013/14 Semester 2, UTHM, 2014 | University |
2013 | Masters Railway CGR10403 Rolling Stock & Traction System, Sesi 2012/13 semester 2, UTHM, 2013 | University |
2013 | MDC 10203 Modelling & Simulation, Sesi 2013/14 Semester 1, UTHM, 2013 | University |
2013 | MDC 10203 Modelling & Simulation, Sesi 2012/13 Semester 2, UTHM, 2013 | University |
2013 | BDD 4083 Manufacturing Control Technology, Sesi 2012/13 Semester 1, UTHM, 2013 | University |
2012 | MDC 10203 Modelling & Simulation, sesi 2012/13 semester 1, UTHM, 2012 | University |
2012 | MKM1102 Project Management Sesi 2011/12 Semester 1, UTHM, 2012 | University |
2012 | Masters Railway CGR10403 Rolling Stock & Traction System, Sesi 2012/13, UTHM, 2012 | University |
2012 | BDD 4083 Manufacturing Control Technology, Sesi 2012/13 Semester 1, UTHM, 2012 | University |
2011 | BDD 4083 Manufacturing Control Technology, Sesi 2011/12 Semester 1, UTHM, 2011 | University |
2011 | BDD 4083 Manufacturing Control Technology, Sesi 2011/12 Semester 2, UTHM, 2011 | University |
2010 | BDD 4083 Manufacturing Control Technology, sesi 2010/11 semester 2, UTHM, 2010 | University |
2010 | Concurrent and Reverse Engineering [BDD 4053], sesi 2009/10 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
2010 | Project Management (MKM 1102), Sesi 2009/10 Semester 2, Universiti Tun Hussein Onn Malaysia | University |
2009 | Project Management (MKM 1102), Sesi 2008/09 Semester 2, Universiti Tun Hussein Onn Malaysia | University |
2009 | Project Management (MKM 1102), Sesi 2009/10 Semester 1, Universiti Tun Hussein Onn Malaysia | University |
2009 | Computer Integrated Manufacturing (MKM 1204), Sesi 2009/10 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
2009 | Concurrent and Reverse Engineering [BDD 4053], sesi 2008/09 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 | University |
2008 | Concurrent and Reverse Engineering [BDD 4053], sesi 2008/09 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 | University |
2008 | Project Management (MKM1102) , Sesi 2008/09 Sem 1, Universiti Tun Hussein onn Malaysia, 2008 | University |
2008 | Concurrent and Reverse Engineering [BDD 4053], sesi 2008/09 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 | University |
2007 | Concurrent and Reverse Engineering [BDD 4053], sesi 2007/08 Semester 2, Universiti Tun Hussein Onn Malaysia, 2008 | University |
2007 | Modelling and Simulation (MKM 1003) , Sesi 2007/08 Semester 1, Universiti Tun Hussein Onn Malaysia | University |
2007 | Production Operation and Analysis (MKM1123), Sesi 2007/08 Semester 1, Universiti Tun Hussein onn Malaysia | University |
2006 | Professional Ethics and Management (BTP3232), Sesi 2006/07 Semester 1, Universiti Tun Hussein Onn Malaysia | University |
2006 | Automation and Robotics (BKM 4523), Sesi 2006/07 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn | University |
2006 | Automation and Robotics (BKM 4523), Sesi 2005/06 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn | University |
Research Grants And Contracts
Publications
Book |
---|
Khalid Bin Hasnan (1997) Pengenalan Kepada Enjin Pembakaran Dalam, Universiti Teknologi Malaysia , 1, ISBN:983 52 0093 9 |
Book Chapters |
Azrin Hani Abdul Rashid, Muhammad Farid Shaari, Mohd Yazid Yahya, Mohd Rozi Ahmad, Mohd Nazrul Roslan, Khalid Hasnan, Siti Hana Nasir, Nurul Zakiah Zamri Tan (2019) Investigation On The Effects Of Textile Structure Of Recycled Pet Bottle (R-Pet) As Newly Developed Composites For Impact Energy Absorption, Advanced Technology Centre: Research And Innovation Series 2, UTHM , 19, ISBN:9789672306504 |
Siti Hana Nasir, Mohd Nazrul Roslan, Khalid Hasnan, Azrin Hani Abdul Rashid, Helmy Mustafa El Bakri (2019) The Influence Of Functional And Comfort Parameters On The Design Characteristics Of Pressure Therapy Gloves, Advance Technology Centre Research And Innovation, UTHM , 1, ISBN:9789672306504 |
General Publications |
Khalid Bin Hasnan (2011) Textile & Packaging (Bda 2801), UTHM |
Khalid Bin Hasnan (2010) Engineering Laboratory Iv (Bda 2721), UTHM |
Haffidzudin Hehsan (2010) Mech. Eng. Practice Ii: Foundry, Pneumatics, Electro-Pneumatics, UTHM |
Khalid Bin Hasnan (2010) Mechanical Engineering Practice Iii (Air Conditioning) Bda2801-2nd, UTHM |
Mohamad Farid Bin Sies (2009) Air Conditioning, UTHM |
Khalid Bin Hasnan (2009) Amalan Kejuruteraan Mekanikal I (Bda 1081), UTHM |
Khalid Bin Hasnan (2009) Cadcam, Cnc Lathe & Cnc Milling, UTHM |
Khalid Bin Hasnan (2009) Engineering Laboratory I (Bda 1701), UTHM |
Khalid Bin Hasnan (2009) Engineering Laboratory Ii (Bda 2701), UTHM |
Khalid Bin Hasnan (2009) Engineering Laboratory Iii (Bda 2711), UTHM |
Khalid Bin Hasnan (2009) Engineering Laboratory V (Bda 3701), UTHM |
badrul zain (2009) Engineering Laboratory Vi (Bda 3711), UTHM |
Khalid Bin Hasnan (2009) Mech. Eng. Practice I: Fitting, Welding, Conventional Lathe, UTHM |
Khalid Bin Hasnan (2009) Mech. Eng. Practice Iv- Edm, Machining & Injection Mould, UTHM |
Khalid Bin Hasnan (2009) Mech. Eng. Practice Iv- Plc & Robotic, UTHM |
Journal |
Raheem K. Ajeela, W.S-I.W. Salim, Khalid Hasnan. (2020) Numerical Investigations Of Heat Transfer Enhancement In A House Shaped-Corrugated Channel: Combination Of Nanofluid And Geometrical Parameters, THERMAL SCIENCE AND ENGINEERING PROGRESS, ELSEVIER , 6, 1, ISSN:24519049 |
Raheem K. Ajeel, W.S.-I.W. Salim, Khalid Hasnan (2019) An Experimental Investigation Of Thermal-Hydraulic Performance Of Silica Nanofluid In Corrugated Channels, ADVANCED POWDER TECHNOLOGY, ELSEVIER B.V. , 10, 2262, ISSN:09218831 |
Raheem K. Ajeel , W.S.-I.W. Salim , Khalid Hasnan (2019) Design Characteristics Of Symmetrical Semicircle-Corrugated Channel On Heat Transfer Enhancement With Nanofluid, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, ELSEVIER LTD , 2, 236, ISSN:00207403 |
Raheem K. Ajeel, W.S.-I.W. Salim, Khalid Hasnan (2019) Influences Of Geometrical Parameters On The Heat Transfer Characteristics Through Symmetry Trapezoidal-Corrugated Channel Using Sio2-Water Nanofluid, INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, ELSEVIER LTD , 2, 1, ISSN:07351933 |
Joewono Prasetijo, Ishak Baba, Khalid Hasnan, Shamsullarifin Ismail, Mohd Ali Ridho Khairul Anuar, Mohd Azri Mat Aron, M Ikhsan Setiawan, Sri Wiwoho Mudjanarko (2019) Modelling Rail Accident And Incident Causes By Using Zero Inflated Poisson Approach, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 9, 255, ISSN:26007916 |
Raheem Kadhim Ajeel, Wan Saiful-Islam Wan Salim, Khalid Hasnan (2018) Impacts Of Corrugation Profiles On The Flow And Heat Transfer Characteristics In Trapezodal Corrugated Channel Using Nanofluids, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit Akademia Baru , 9, 170, ISSN:22897879 |
Ajeel R.K., Salim W.S.W., Hasnan K. (2018) Numerical Investigations Of Flow And Heat Transfer Enhancement In A Semicircle Zigzag Corrugated Channel Using Nanofluids, INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, International Information and Engineering Technology Association , 12, 1292, ISSN:03928764 |
Ajeel R.K., Salim W.S.-I.W., Hasnan K. (2018) Thermal And Hydraulic Characteristics Of Turbulent Nanofluids Flow In Trapezoidal-Corrugated Channel: Symmetry And Zigzag Shaped, CASE STUDIES IN THERMAL ENGINEERING, Elsevier Ltd , 9, 620, ISSN:2214157X |
Ajeel R.K., Wan Salim W.S.-I., Hasnan K.B. (2018) Thermal Performances Comparison In Various Types Of Trapezoidal Corrugated Channel Using Nanofluids, INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING, Praise Worthy Prize , 8, 672, ISSN:19708734 |
Adel Muhsin Elewe, Khalid Bin Hasnan and Azli Bin Nawawi (2017) Hybridized Firefly Algorithm For Multi-Objective Radio Frequency Identification (Rfid) Network Planning, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 2, 834, ISSN:18196608 |
Adel Muhsin Elewe, Khalid Hasnan, Azli Nawawi (2017) Optimization Of Rfid Network Planning Using Mdb-Fa Method, JOURNAL OF TELECOMMUNICATION, ELECTRONIC AND COMPUTER ENGINEERING, Universiti Teknikal Malaysia Melaka , 12, 7, ISSN:21801843 |
Azli Nawawi, Khalid Hasnan, Zamani Ngali and Noor Azizah Sidek (2016) Effect Of Parameters Variation On The Performance Of Particle Swarm Optimization Algorithm For Tag Coverage Problem Of Radio Frequency Identification Network, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 9, 10971, ISSN:18196608 |
Khalid Hasnan, Aftab Ahmed, Badrul-aisham, Qadir Bakhsh, Kamran Latif , and Kashif Hussain (2016) Integration Of Rfid Network Planning With Xbee Network: A New Approach, INTERNATIONAL JOURNAL OF SMART HOME, Copyright ? 2016 SERSC , 325, ISSN:19754094 |
Khalid Hasnan, Djamal Hissein Didane, Mohd Amran Madlan (2016) Interior Noise Reduction Approach For Monorail System, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7601, ISSN:1819-6608 |
Azli Nawawi, Khalid Hasnan, Salleh Ahmad Bareduan (2014) Corellation Between Rfid Network Planning (Rnp) Parameters And Particle Swarm Optimization (Pso) Solutions, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 1245, ISSN:1660-9336 |
Jalil Azlis-Sani, Siti Zawiah Md Dawal, Norhayati Mohd Zakwan and Khalid Hasnan (2011) Sleepiness Among Train Drivers: A Case Study In Malaysia , MALAYSIAN JOURNAL OF ERGONOMICS, UNIMAP , 12, 23, ISSN:2773501X |
Prosiding / Seminar |
Tengku Imran Tengku Munawir, Ahmad Abqari Abu Samah, Muhammad Afiq Akmal Rosle, Jalil Azlis-Sani, Khalid Hasnan, S.M. Sabri S.M. Ismail, Muhammad Nur Annuar Mohd Yunos and Teo Yen Bin (2017) A Comparison Study On The Assessment Of Ride Comfort For Lrt Passengers, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
Khalid Bin Hasnan (2010) Framework Of Telemetry Technology Application In Robotic Area Using Matlab Toolboxes For Education, IEEE |
Consultancies
Year | Description | Level |
---|---|---|
2015 | Consultancy MTCP - Project Management Towards Organisational Sustainability: Theory And Practice , RM 200,000 | National |
2014 | Consultancy MTCP - Project Management Towards Organisational Sustainability: Theory And Practice , RM 250,000 | National |
2013 | Fascilitator for PROJECT Penyediaan Fasiliti Industrial Training Petroleum Iraq at UTHM | National |
2012 | Consultative Panel for Program Training Pra-Penempatan Tenaga Instructor KKTM Kemaman Batch 2 ?Kursus Teknikal Teras (siri 2) | National |
2011 | Consultative Panel for Penubuhan Institute For Integrated Engineering UTHM. 2010-11 | National |
2001 | Curriculum and Laboratory Development for IKBN, Ministry Of Youth and Sports, Malaysia, 2001 -02 | National |
Supervision
Year | Description | Role |
---|---|---|
2015 | Supervisor for Muhammad Asyraf bin Kamarudin, Msc Railway, The Effect of Monorail Bogie Parameter on Ride Quality , UTHM, 2015 | Supervisor |
2015 | External Examiner for Raguvaran a/l Jayahkudy, MMeng, UTem, Sept 2015 | External Examiner |
2015 | Supervisor fro Azli Nawawi, PhD, RFID Tag Coverage Optimization Using Particle Swarm Optimization (PSO) Algorithm And Design Of Experiment (DOE) Technique , UTHM, 2015 | Supervisor |
2015 | Supervisor for Aftab Soomro, PhD, Optimization Of Green Supply Chain Management Through Radio Frequency Identification (RFID) Network Planning , UTHM, 2015 | Supervisor |
2015 | Supervisor for Djamal Hissein Didane, MSc Railway, Interior Noise Reduction Approach for Monorail System, UTHM, 2015 | Supervisor |
2014 | Co Supervisor for Arhami Mutalib, PhD, Design and Stability Analysis of an Unmanned Small-scale Air-Land-Water Vehicle, UTHM, 2014 | Supervisor |
2014 | Examiner for PhD thesis : Shahrul Azmir bin Osman (2014), Charaterizationof a medium-duty I.C.Engine operated using Retrofit Monogas Fuelling Control | Examiner |
2014 | Supervisor for Qadir Bashkh Jamali , Masters MechEng, Design Of A Hybrid Locomotion System For Mobile Robot And Analysis For Suitable Material Selection , UTHM, 2014 | Supervisor |
2014 | Supervisor for Winardi Sani, PhD, Methanolysis of Crude Palm Oil for Biodiesel Production in a Pilot Plant, UTHM, 2014 | Supervisor |
2013 | External Examiner for Majid Moayedfar, Masters Mechanical Engineering, Universiti Putrajaya Malaysia, 2013 | External Examiner |
2012 | External Examiner for Alina Binti Aminuddin, Masters, To Measure Occupant?s Body Temperature By Non Destructive Tool At Health Centre Of Hot Humid Climate, Universiti Putra Malaysia, 2012 | External Examiner |
2012 | External Examiner for Nurhaiza Binti Shahrir, Masters, Development Of Predictive Maintenance System In A Solar Cell Manufacturing Industry, Universiti Putra Malaysia, 2012 | External Examiner |
2012 | External Examiner for Mohammad Farid Saaid, Masters, The Developmant of Radio Frequency Identification Walking Stick (RFIWS) System for the blind, Universiti Teknologi MARA, 2011 | External Examiner |
2012 | Supervisor for Luhur Budi Saesar, Masters Mech Eng, Development Of Semi-Autonomous Mobile Robot Hardware-In-The-Loop (HIL) Simulation For Indoor Mapping, UTHM, 2012 | Supervisor |
2011 | Supervisor for Prima Adhi Yudhistira, Masters Mech Eng, Kinematical Analysis and Simulation of Transformable Wheelchair Mechanism , UTHM, 2011 | Supervisor |
2011 | Supervisor for Omar Abdel Aziz , Masters Mech Eng, Development of Wireless Mechanism to reduce wiring Complexities of Robot Manipulator , UTHM, 2011 | Supervisor |
2010 | Examiner for M Mech Eng Thesis : Martin Obinna Nwanko ; Implementation Of Finite Element Mathematical Models To Predict The Effect Of Scaling On The Water Tube Boiler, Universiti Tun Hussein Onn Malaysia | Examiner |
2010 | Supervisor for Said Abdo Elshayeb, Masters Mech Eng,Multi-Sensor Fusion For Mobile Robot Positioning, UTHM, 2010 | Supervisor |
2009 | Examiner for PhD Thesis; Sh Salleh Sh Ahmad , Bottleneck Adjacent Matching (BAM) Heuristic For Cyber Manufacturing Scheduling : Re-Entrant Shop With Dominant Machine Problem, Universiti Tun Hussein Onn Malaysia | Examiner |
2008 | Supervisor for Mohd Nurhanif bin Hashim, MMechEng, Universiti Tun Hussein Onn Malaysia, 2008 | Supervisor |
2000 | Supervisor for Lee Chee Me., MMechEng, Universiti Teknologi Malaysia, 2000 | Supervisor |
1999 | Supervisor for Mustaffa Hj Ibrahim, MMechEng, Universiti Teknologi Malaysia, 1999 | Supervisor |
Extension & Public Services
Year | Description | Level |
---|---|---|
2015 | Pengerusi, Jawatankuasa Penduduk Taman Pintas Jaya, Parit Raja, Johor | District |
2015 | Pengerusi Tetap, Pertubuhan Ikram Negeri Johor | District |
2014 | Pengerusi, Jawatankuasa Penduduk Taman Pintas Jaya, Parit Raja, Johor | District |
2014 | Pengerusi Tetap, Pertubuhan Ikram Negeri Johor | District |
2013 | Pengerusi, Jawatankuasa Penduduk Taman Pintas Jaya, Parit Raja, Johor | District |
2012 | Yangdipertua, Persatuan Ibubapa Guru, Sek Keb Pintas Puding Parit Raja | District |
2012 | Pengerusi, Jawatankuasa Penduduk Taman Pintas Jaya, Parit Raja, Johor | District |
2011 | Pengerusi, Jawatankuasa Penduduk Taman Pintas Jaya, Parit Raja, Johor | District |
2011 | Pengerusi, Jawatankuasa Penduduk Taman Pintas Jaya, Parit Raja, Johor | District |
2011 | Yangdipertua, Persatuan Ibubapa Guru, Sek Keb Pintas Puding Parit Raja | District |
2010 | AJK Persatuan Staf Akademik UTHM ( PERKASA) | University |
2010 | Yangdipertua, Persatuan Ibubapa Guru, Sek Keb Pintas Puding Parit Raja | District |
2010 | Pengerusi, Kelab Kebajikan dan Sukan Fakulti Kej Mekaninal dan Pembuatan, UTHM | University |
2009 | AJK Persatuan Staf Akademik UTHM ( PERKASA) | University |
2009 | Yangdipertua, Persatuan Ibubapa Guru, Sek Keb Pintas Puding Parit Raja | District |
2008 | AJK Persatuan Staf Akademik UTHM ( PERKASA) | University |
Courses & Training
Year | Description Organiser / Venue | Date |
---|---|---|
2022 | RAIL INDUSTRIAL TALK: A KNOWLEDGE AND EXPERIENCE SHARING ON CONTROL CENTRE AND URBAN RAIL OPERATION UTHM / ONLINE - MICROSOFT TEAMS | 29/05/2022 |
2022 | PROGRAM NATURE HERO 2.0 2022 (GO GREEN, GLOBAL CLEAN) BERSAMA SWM ENVIRONMENT SDN BHD UTHM / UTHM Kampus Pagoh | 19/05/2022 |
2022 | WEBINAR PENYEDIAAN MODUL P&P UTHM 2022 SIRI 3 UTHM / PAUTAN GOOGLE MEET | 15/03/2022 |
2021 | TAKLIMAT PROJEK SARJANA MUDA (PSM) BERSAMA STAF UTHM / Zoom link : https://bit.ly/PSMTalk Meeting ID : 225 864 7250 | 03/11/2021 |
2021 | BENGKEL PEMANTAPAN AMALI ATAS TALIAN FTK UTHM UTHM / Atas Talian | 03/10/2021 |
2021 | IMPLEMENTING A MODERN BIM PROCESS UTHM / Virtual Click Meeting | 14/07/2021 |
2021 | SESI TAKLIMAT RESEARCH ENHANCED - STRUCTURED INTERNSHIP PROGRAMME (RE-SIP) FTK 2021 UTHM / SECARA ATAS TALIAN | 16/06/2021 |
2021 | PERKONGSIAN ILMU: PERMOHONAN GERAN KONSORTIUM KECEMERLANGAN PENYELIDIKAN (KKP) BERSAM YBRS. PROF. MADYA DR. NOR AZIATI BINTI ABDUL HAMID UTHM / GOOGLE MEET | 25/04/2021 |
2021 | SESI PERKONGSIAN ILMU: PERMOHONAN GERAN KONSORTIUM KECEMERLANGAN PENYELIDIKAN (KKP) BERSAMA YBRS. PROF. MADYA DR. NOR AZIATI BINTI ABDUL HAMID UTHM / GOOGLE MEET | 25/04/2021 |
2021 | KURSUS BENGKEL 2U2I DAN WORK BASED LEARNING (WBL) LAIN-LAIN / ATAS TALIAN | 16/02/2021 |
2020 | ANIMATION USING POWER POINT UTHM / - | 22/07/2020 |
2020 | ANIMATION USING POWERPOINT UTHM / - | 22/07/2020 |
2020 | CREATING ENGAGING & INTERACTIVE LIVE PRESENTATION WITH STREAMYARD UTHM / - | 20/07/2020 |
2020 | BENGKEL SASARAN KERJA TAHUNAN 2020 INSTITUT KEJURUTERAAN INTEGRASI (I2E) UTHM / KSL HOTEL & RESORT, JOHOR BAHRU | 05/03/2020 - 07/03/2020 |