Staff Profile

Full NamePROF. Dr. SULAIMAN BIN HAJI HASAN
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN PEMBUATAN DAN INDUSTRI (JKPI)
Email
Designation VK7 - PROFESOR

Field of Expertise

Field Category (KPT) MANUFACTURING
Field (KPT) Milling and Process Materials
Field of Specialization (KPT) Milling and Process Materials

Areas of Research Interest

1. Advanced Manufacturing
2. Advanced Machining
3. Manufacturing Management
4. Supply Chain Management
5. Green Manufacturing Practice

Innovation Field of Interest

1. Friction stir welding
2. Manufacturing Automation

Academic Qualification

YearQualificationInstitution
1999 DOKTOR FALSAFAH MEKANIKAL & PEMBUATAN UNIVERSITY OF BIRMINGHAM
1987 SARJANA KEJURUTERAAN PEMBUATAN UNIVERSITY OF LIVERPOOL
1982 DIPLOMA PENDIDIKAN UNIVERSITI MALAYA
1980 SARJANA MUDA KEJURUTERAAN PENGELUARAN UNIVERSITY OF BIRMINGHAM

Professional Appointments

VK7 - Profesor

Management Experience

DateDescription
01/07/2011 - 31/10/2011 Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan
01/08/2009 - 30/06/2011 Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan
20/03/2008 - 31/07/2008 Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan
01/01/2001 - 31/12/2002 Dekan
Fakulti Teknologi Kejuruteraan (Lama)

Professional Societies

YearDescriptionRoleLevel
11/04/1986 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Research Grants And Contracts

CodeTitleDesignationEnd Date
H179 Influence of rare earth additions on solidification, microstructure and mechanical properties of Al-17Si-4Cu (LM30) hypereutectic cast alloys Ahli 30/06/2020
U879 The Impact Of Human Capital Towards Manufacturing Sustainability Through Contribution Of Malaysa Technical Univesity Network (MTUN) To Manufacturing Industri (MI) - A Case Study In UTHM Ahli 31/08/2019
1595 Determining Flow Behavior and Characterization of Quality Through Processing Condition of Injected Mold Polypropylene-Nanoclay-Gigantochloa Scortechini fibers. Ahli 31/01/2019
U482 Development of Algorithm to Determine the Surface Roughness and Tool Ware in Uvat (Ultrasonic Vibration Assisted Turning) Ahli 31/03/2018
A041 Welding Of Tee Joint Stainless Steel By Using Gas Metal Arc Welding (GMAW) Cold Metal Transfer (CMT) Method Ahli 01/02/2018
U357 The Impact of Injection Molding Processing Conditions and Fiber Content Towards The Properties of Polypropylene-Nanoclay Nanocomposites Blend With Gigantochloa Scortechinii Fibers Ahli 31/05/2017
U471 The Impact of Injection Molding Processing Conditions and Fiber Content Toward the Properties of Polypropylene-Nanoclay Nanocomposites Blend with Gigantochloa Scortechinii Fibers Ahli 28/02/2017
U481 Green Manufacturing Practices in Local SME Ketua 28/02/2017
1216 New Washcoat of y-Alumina Nanocrystalline on New Oxide (NiO) Catalyst in FeCrAI Substrate for Catalytic Converter Using Novel Ultrasonic Approach Ahli 31/12/2016
1422 The effects of rare-earth metals on solidification rate, microstructure and mechanical properties of aluminium Al-Si12 alloy casting Ahli 30/11/2016
1426 The Relationship of The Chip Size with Oxide Precipitation on The Mechanical and Physical Properties of The Recycled Aluminum Alloy (AA6061) in Hot Press Forging Ahli 30/11/2016
E023 Establishing New High Strength, Creep And Corrosion Resistant Magnesium Casting Alloy At Elevated Temperature Ahli 30/11/2016
A022 High Performance Polymeric Materials Ketua 29/02/2016
1118 The Effects Of Cr Addition On Corrosion Resistance, Solidification Rate, Microstructure And Mechanical Properties Of Aluminium Alloy (LM6) Ahli 30/11/2015
1058 Characterization of Mist Flow of Minimal Quantity Lubrication Technique in Machining Process Ahli 14/10/2015
U291 Thermal Response on Nanofluid Flow in The Presence of Magnetic Field with Variable Stream Conditions Ketua 31/07/2015
1052 Fundamental Evaluation of Waste Polystyrene (PS) as Sustainable Binder for Green Metal Injection Molding Ahli 15/04/2015
1063 Reaction kinetic model for the two-step transesterification in the biodiesel production plant Ketua 14/10/2014
0949 Lean Application in Small Manufacturing Industry Within Cyber Manufacturing System Ketua 31/08/2014
0903 The Novel Continues Biodiesel Proces using Ultrasound Clamp on Tubular Reactor Ketua 30/03/2014
0759 New Process of Developing Nanocrystalline FeCr for Fuel Cell Application Ahli 28/02/2014
0828 Direct Recycling of Automotive Scrap Material (Al 6060) in High Speed Machining Process - Propose Waste to Resources Ahli 31/12/2013
0749 Sustainability Of E-Product Recycling: Propose National Framework, Model And Policy Ahli 31/08/2013
0891 Biodiesel Production Based on Waste Cooking Oil : Promotion of the Establishment on the Integrated Sustainable Industry at Chip Crackers Factory in Batu Pahat Ketua 30/04/2013
0751 Micro-Machining Using Deep Cryogenic Treated Cutting Tools On Titanium Alloy - Aero Space Alloy By High Speed Machining Ahli 28/02/2013
0723 The Development of Semi Empirical Aerodynamics Formulation for an Aircraft Fuselage Through Wind Tunnel Test Ketua 28/02/2012
C004 Kajian Berkaitan Kaedah Penerimaan Ahli Sains Sebagai Ahli Badan Professional Ahli 30/09/2010
0372 An Experimental Study of High Speed Turning on Hardened Martensitic Stainless Steel Using Cubic Boron Nitride (CBN) & Polycrystalline Cubic Boron Nitride (PCBN) Cutting Tools & Their Turning Effect on Surface Roughness, Tool Wear, Cutting Forces & Tempera Ketua 30/06/2010
0420 Framework for Effective Collaboration between Public Training Institutions and Industries in the Contet of the National Dual Training System Environment in Malaysia Ketua 31/05/2010
0369 A New Material Constitutive Model of Dual Phase Steel and Springback Simulation in the Metal Forming Application Ahli 31/05/2010
S004 Development Of Modular And Real-Time Manufacturing Machine Control Software Systems Ahli 31/08/2008
A009 Development of Suitable Model of Cyber Manufacturing Technology for Application in Local SMEs Ketua 07/09/2006
0163 Indoor Air Quality of Manufacturing Factory Area Ketua 31/12/2005
0009 Application of A1 in Supply Chain Management for SMI in Malaysia Ketua 30/09/2004

Publications

Book Chapters
Haris Rachmat, Tatang Mulyana, Sulaiman bin H. Hasan, and Mohd. Rasidi bin Ibrahim
(2016) Design Selection Of In-Uvat Using Matlab Fuzzy Logic Toolbox, Recent Advances On Soft Computing And Data Mining, Springer , 555, ISBN:978-3-319-51279-2
Journal
S Z Khamis, M H Othman, S Hasan, N M Main, S R Masrol, M F Shaari, S N Ibrahim and S Salim
(2019) Multiple Responses Optimisation In Injection Moulding Parameter For Polypropylene-Nanoclay-Gigantochloa Scortechinii Via Taguchi Method., JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing , 3, 1, ISSN:17426596
M.H. Othman, S.Z. Khamis, M.S. Rosli, S. Hasan, M.H.I. Ibrahim, S.R. Masrol and N.M. Main
(2018) Injection Moulding Parameter Optimisation To Improve The Quality Of Sample Made From Polymer Nanocomposites With Gigantochloa Scortechinii Fibres, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 7, 623, ISSN:2227524X
Mohd Hilmi Othman, Arif Izzudin Muhammad and Sulaiman Hasan.
(2018) Investigation Of Clothes Recycling As Colouring Agent For Polypropylene-Nanoclay Nanocomposites, INTERNATIONAL JOURNAL OF TECHNOLOGY AND ENGINEERING STUDIES, KKG Publications. , 2, 1, ISSN:24143413
Nur Syuhada binti Zakaria and Sulaiman bin Haji Hasan
(2017) Green Manufacturing Practices(Gmp) Framework For Local Small And Medium Enterprises (Sme) In Johor: A Review On Enablers And Barriers, And Preliminary Findings On Critical Factors, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, International Journal Of Engineering and Technology , 1, 2576, ISSN:23198613
M.H. Othman, S. Hasan, M. H. I. Ibrahim, S. Z. Khamis
(2017) Optimum Injection Moulding Processing Condition To Reduce Shrinkage And Warpage For Polypropylene-Nanoclay-Bamboo Fibre With Compatibilizer, MATERIALS SCIENCE FORUM, Trans Tech Publication , 3, 51, ISSN:16629752
M.H. Othman , W. Muhammad , W.N. Azrina , M.H.I. Ibrahim , S. Hasan , S.K. Hashim , S.Z. Khamis
(2016) Optimisation Of Processing Condition For Flexural Strength Of Polypropylene-Nanoclay-Gigantochloa Scortechinii Nanocomposites, JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Medwell Journal , 12, 2668, ISSN:18187803
S.Hj Hasan A.N.A Ahmad,D.Feriyanto
(2015) Computerised Value Stream System (Cvss) To Reduce Waste In Lean Manufacturing Operation, INTERNATIONAL JOURNAL OF INNOVATION IN MECHANICAL ENGOINEERING AND ADVANCED MATERIALS, university Mercu Buana , 10, 13, ISSN:24775541X
Hassan S.,Ahmad A.N.A., D. Feriyanto
(2015) Computerized Value Stream System (Cvss) To Reduce Waste In Lean Manufacturing Operation, INTERNATIONAL JOURNAL OF INNOVATION IN MECHANICAL ENGINEERING AND ADVANCED MATERIALS, umb-intl-journal , 12, 13, ISSN:2477-5428
Sulaiman Hj. Hasan, A.N. Aizat Ahmad, Dafit Feriyanto
(2015) Computerized Value Stream System (Cvss) Untuk Mengurangi Limbah Pada Operasi Lean Manufaktur, RESEARCH AND APPLICATION OF INDUSTRIAL SYSTEM AND ENGINEERING, Fakultas Teknik Universitas Mercu Buana , 2, 61, ISSN:2347532
Ahmad A.N.A., Hassan S., Husin N.
(2015) Cyber Value Stream System Reduced Waste And Non-Value Added Of Manufacturing Operation, INTERNATIONAL JOURNAL OF ADVANCEMENTS IN MECHANICAL AND AERONAUTICAL ENGINEERING, Institute of Research Engineers and Doctors, USA , 4, 205, ISSN:2372-4153
Vibhu Vignesh balachandar, Sulaiman Haji Hasan, Ashwin Kumar, kandasamy Ramasamy
(2015) Heat Transfer Of Nanofluid Through Boundary Layer Stagnation Flow Over Shrinking Surface Influencing Injection And Variable Stream Conditions, AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, AENSI , 10, 2, ISSN:19918178
A. Praptijanto, E Augustian,Y Putrasari, D Sebayang, AZM Rus, S.Hasan
(2015) Sonochemistry Approach To Reducing Reaction Time For Jatropa Curcass Oil By Clamp On Tubular Reactor, ENERGY PROCEDIA, Transtech Publication , 2, 480, ISSN:16628958
D. Sebayang, Deni S. Khaerudini, M.A. Othman, S. Hasan, S. Mahzan, D. Fredrick, T. Sujitno and P. Untoro
(2014) Comparison Of High Temperature Oxidation Of Nanocrystalline Fecr Alloy Consolidated By Spark Plasma Sintering And Hot Pressing, WORLD JOURNAL OF ENGINEERING, MULTI-SCIENCE PUBLISHING COMPANY LTD , 1, 123, ISSN:17085284
Ahmad A.N.A., Hassan S., Husin N.
(2014) Development Of Computerize Value Stream System, ADVANCED ENGINEERING RESEARCH, Trans Tech Publications , 4, 1405, ISSN:10226680
Ho Yoong Chow, Sulaiman Hj Hasan, Salleh Ahmad Bareduan
(2013) Basic Concept Of Implementing Artificial Bee Colony (Abc) System In Flow Shop Scheduling, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 3, 385, ISSN:1660-9336
Salleh Ahmad Bareduan & Sulaiman Hasan
(2012) Methodology To Develop Heuristic For Re-Entrant Flow Shop With Two Potential Dominant Machines Using Bottleneck Approach, INTERNATIONAL JOURNAL OF COMBINATORIAL OPTIMIZATION PROBLEMS AND INFORMATICS, Editada Mexico , 9, 81, ISSN:2007-1558
Salleh Ahmad Bareduan and Sulaiman Hasan
(2010) Makespan Algorithms And Heuristic For Internet-Based Collaborative Manufacturing Process Using Bottleneck Approach, JOURNAL OF SOFTWARE ENGINEERING & APPLICATIONS, Scientific Research Publishing , 1, 91, ISSN:1945-3116
Salleh Ahmad Bareduan, Sulaiman Hj. Hasan and Saparudin Ariffin
(2008) Finite Scheduling Of Collaborative Design And Manufacturing Activity: A Petri Net Approach, JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT, Emerald Group Publishing Limited , 3, 274, ISSN:1741-038X
Salleh Ahmad Bareduan, Sulaiman Hj Hasan, Noor Hakim Rafai and Muhammad Farid Shaari
(2006) Cyber Manufacturing System For Small And Medium Enterprises: A Conceptual Framework, TRANSACTIONS OF NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION FOR SOCIETY OF MANUFACTURING ENGINEERS , Society of Manufacturing Engineers , USA , 5, 365, ISSN:1047-3025
Sh Salleh Sh Ahmad dan Sulaiman Hj Hassan
(2003) Kaedah Pengukuran Tahap Inovasi Untuk Sektor Pembuatan: Satu Kajian Kes Dalam Industri Perabot, JURNAL SAINS & TEKNOLOGI, UTHM , 10, 52, ISSN:1675-7602
Sulaiman Bin Haji Hasan
(2002) Supply Chain Models, JURNAL ITTHO, UTHM , 100, ISSN:15110303
Sulaiman Bin Haji Hasan
(2000) Application Of It In Supply Chain Management, JURNAL ITTHO, UTHM , 303, ISSN:15110303
Prosiding / Seminar
K. Kamdani, S. Hasan, A.F.I. Ahmad and M.A. Lajis
(2018) Study On Tool Wear And Wear Mechanism When End Milling Inconel 718 Using Tialn Coated Carbide, MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS) , 330, ISBN:9789671362525
M.H.OTHMAN, M.S.ROSLI, S.HASAN, A.M. AMIN, M.Y.HASHIM, O.M.F.MARWAH AND S.Y.M. AMIN.
(2018) The Optimisation Of Processing Condition For Injected Mould Polypropylene-Nanoclay-Gigantochloa Scortechinii Based On Melt Flow Index, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
S.Z.Khamis , M.H.Othman, S.Hasan, M.H.I. Ibrahim
(2017) Characterizetion Of Flexural Strength, Warpage And Shrinkage Of Polypropylene-Nanoclay-Nanocomposites Blend With Gigantochloa Scortechinii, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Ahmad A.N.A., Hassan S., Husin N.
(2017) Cyber Value Stream System Reduced Waste And Non-Value Added Of Manufacturing Operation , Institute of Research Engineers and Doctors, USA , 1, ISBN:978-1-63248-059
M.H.Othman, A.I.Muhammad and S.Hasan
(2017) Investigation Of Clothes Recycling As Coloring Agent For Polypropylene Nanoclay Nanocomposites, IRMI UNIVERSITY , 13, ISBN:9789696837718
M.H. Othman, S. Hasan, S.Z. Khamis, M.H.I Ibrahim, S.Y. M.Amin
(2017) Optimisation Of Injection Moulding Parameter Towards Shrinkage And Warpage For Polypropylene-Nanoclay-Gigantochloa Scortechinii Nanocomposites, Elsevier Science Direct , 673, ISBN:1877-7058
Sivaprakasam Thamizhmanii, Sulaiman Hasan and Elango Natarajan
(2017) Performance Of Tool Wear Using Cryogenic Treated Cbn Inserts, WORLD CONGRESS ON ENGINEERING , 100, ISBN:9789881404831
M.H.Othman and S.Hasan
(2017) The Prediction Of Quality Performance Based On The Modelling Of Injection Moulding Processing Conditions For Polypropylene Nanoclay Integral Hinge, UKM , 22, ISBN:9789670829661
Mohd Hilmi Othman
(2016) Compounding Of Recycled Clothes With Polypropylene-Nanoclay For Injection Molding Feedstock, WMIT Group Sdn Bhd , 384 , ISBN:9789671395288
S. Thamizhmanii and Sulaiman Hasan
(2014) Solid State Friction Stir Welding Using Dovetail Groove Butt Joint, science.direct.com , ISBN:1234
Sulaiman Bin Haji Hasan
(2012) Aerodynamics Analysis On Unsymetrical Models, UTHM
Sulaiman Bin Haji Hasan
(2012) Basic Concept Of Implementing Artificial Bee Colony (Abc) System In Flow Shop Scheduling, UTHM
Sulaiman Bin Haji Hasan
(2012) Employment Of Swirling Flow Technique To Reduce Turbulence Of Molten Metal In Thin Section Casting Of (Al-7si-0.3mg)Alloy, ICE
Sulaiman Bin Haji Hasan
(2012) Optimising Parameter Setting In Processing Polypropylene-Clay Composite Through Taguchi Method, University of Hong Kong
Sulaiman Bin Haji Hasan
(2012) Performance Of Cryogenically Treated Cbn Inserta On Difficult To Cut Materials During Turning, GCMM
Sulaiman Bin Haji Hasan
(2012) The Effect Of Parameter Settings On Shrinkage And Warpage In Injection Moulding Throu Cadmould Simulation And Taguchi, ICMET
Sulaiman Bin Haji Hasan
(2012) The Influence Of Hot Air Environment And Humidity Towards The Performance Of Folding Endurence For Polypropylene Hinges, UTHM
Sulaiman Bin Haji Hasan
(2012) The Novel Continues Biodiesel Process Using Ultrasonic Clamp Ontubular Reactor, UTHM
Sulaiman Bin Haji Hasan
(2012) The Optimisation In Machining Aisi1030 Using Taguchi Method For Dry And Flood Cutting Condition, UTHM
Sulaiman Bin Haji Hasan
(2011) Packaging Cushioning Performance Of Laminated Paperboard With Sugarcane Waste Fibre
Sulaiman Bin Haji Hasan
(2011) Packaging Cushioning Performance Of Coconut Coir-Polyester Composites
Sulaiman Bin Haji Hasan
(2011) The Effects Of Injection Molding Processing Parameters And Mold Gate Size Towards Weld Line Strength
Sulaiman Bin Haji Hasan
(2010) Bottleneck Adjacent Matching Heuristics Versus The Neh For Re Entrant Flow Shop Scheduling
Sulaiman Bin Haji Hasan
(2010) Controlling Oxidation Reaction Of Fe Cr Alloys Using Rare Earth Element Implanation
Sulaiman Bin Haji Hasan
(2010) Deep Cryogenic Treatment On Aluminium Silicon Carbide Composite
Sulaiman Bin Haji Hasan
(2010) Ni Layer Evolution Of Fe Cral Substrate Treated By Ultrasonic And Electroplating Methods In Long Term Oxidation At 900 C
Sulaiman Bin Haji Hasan
(2010) Relationship Between Flank Wear And Cutting Forces On Machining Of Hard Martensitic Stainless Steel By Supper Hard Steel
Sulaiman Bin Haji Hasan
(2009) Effect Of Tool Wear And Forces By Turning Process On Hard Aisi 440c And Scm 440
Sulaiman Bin Haji Hasan
(2009) Effect Of Tool Wear And Forces By Turning Process On Hard Aisi 440c And Scm 440 Materials
Sulaiman Bin Haji Hasan
(2009) Investigation Of Surface Roughness And Flank Wear By Cbn And Pcbn Tools On Hard Cr-Mo Steel
Sulaiman Bin Haji Hasan
(2009) Performance Of Cbn And Pcbn Tools On Machining Of Hard Aisi 440c Martensitic Stainless Steel
Sulaiman Bin Haji Hasan
(2009) Regional Cooperation On Research Of Advance Material And Failure Analysis-6 Yrs Of Cooperation Between Uthm And Batan
Sulaiman Bin Haji Hasan
(2008) Finite Scheduling Of Collaborative Design And Manufacturing Activity: Apetri Net Approach
Sulaiman Bin Haji Hasan
(2008) Investigating Flank Wear And Cutting Forces On Cutting Tools On Hard Steels By Turning
Sulaiman Bin Haji Hasan
(2008) Motor Sport Championship Experience On Implementation Of Pobl
Sulaiman Bin Haji Hasan
(2007) An Investigation Of Multi Roller Burnishing Process On Mild Steel
Sulaiman Bin Haji Hasan
(2007) Application Of Taguchi Method To Study Surface Roughness And Tool Wear In Turning Process
Sulaiman Bin Haji Hasan
(2007) Intergrated Approach Materials And Engineering Design
Sulaiman Bin Haji Hasan
(2007) Study Of Surface Roughness On Induction Hardened Steel Using Cbn Tool
Sulaiman Bin Haji Hasan
(2007) Tool Wear And Surface Roughness In Turning Aisi 8620 Using Coated Ceramic Tool
Sulaiman Bin Haji Hasan
(2006) Analysis Of Roughness,Forces And Wear In Turning Gray Cast Iron
Sulaiman Bin Haji Hasan
(2006) Analysis Of Surface Roughness By Turning Process Using Taguchi Method
Sulaiman Bin Haji Hasan
(2006) Comparison Of Surface Roughness Between Non Ferrous And Ferrous Metal At Low Sliding Speed By Different Ball Diameters
Sulaiman Bin Haji Hasan
(2006) Effect Of Electrical Parameters On Pdd-Edm Performance On Titanium Alloy
Sulaiman Bin Haji Hasan
(2006) Effect Of Electrical Parameters On Pdm-Edm Performances Of Titanium Alloy
Sulaiman Bin Haji Hasan
(2006) Surface Roughness And Forces While Machining Cr-Mo Alloy Steel Using Coated Tools
Sulaiman Bin Haji Hasan
(2005) Influence Of Surface Roughness And Hardness By Ball Burnishing Process On Cr-Mo Alloy Steel
Sulaiman Bin Haji Hasan
(2002) A Conceptualperspective Of Engineering Technology Program In Kuittho
Sulaiman Bin Haji Hasan
(2002) Engineering Education In India
Sulaiman Bin Haji Hasan
(2002) Engineering Education In The University Colleges:A New Perspective And Challenges
Sulaiman Bin Haji Hasan
(2001) Polytechnic Staff Training Centre, A Unique Technical Cooperation Project
Sulaiman Bin Haji Hasan
(2001) Technical And Vocational Education Programme: A New Program At Kuittho For Moe
Sulaiman Bin Haji Hasan
(2000) Application Of Soft System Technology In Supply Chain Management
Sulaiman Bin Haji Hasan
(2000) Peranan Automasi Dan Robotik Dalam Proses Fabrikasi
Sulaiman Bin Haji Hasan
(2000) Training Engineer And Engineering Technologist In The New Era
Sulaiman Bin Haji Hasan
(1996) Application Of Knowledge Based Systems In Supply Chain Management
Sulaiman Bin Haji Hasan
(1996) Global Supply Chain Framework
Sulaiman Bin Haji Hasan
(1996) Supply Chain Re-Engineering

« Back