Jabatan Kejuruteraan Mekanikal
Fakulti Kejuruteraan Mekanikal dan Pembuatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan
 
  07-4537701
PROF. MADYA Ir. Ts. Dr. AL EMRAN BIN ISMAIL

DS54 Profesor Madya

DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL , UNIVERSITI KEBANGSAAN MALAYSIA (2012)
SARJANA KEJURUTERAAN MEKANIKAL , UNIVERSITI TEKNOLOGI MARA (2003)
SARJANA MUDA KEJURUTERAAN MEKANIKAL , UNIVERSITI PUTRA MALAYSIA (2000)

CategoryExpertise
Field Category (KPT) : ENGINEERING AND TECHNOLOGY
Field (KPT) : Mechanical Engineering
Field of Specialization (KPT) : Stress Analysis

Fatigue and Fracture Mechanics
Crashworthiness and Impact Mechanics
Natural Fiber Reinforced Composites.
Computational Mechanics.

Machine and Mechanisms Design.
Design for Sustainability.

DateDescription
01/01/2024 - 31/12/2025 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Mechanical Failure Prevention and Reliability Research Center (MPROVE)
01/06/2021 - 31/12/2023 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Mechanical Failure Prevention and Reliability Research Center (MPROVE)
01/11/2020 - 31/10/2022 Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Kejuruteraan Mekanikal dan Pembuatan
01/01/2020 - 30/06/2021 Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Crashworthiness and Collisions Research Group (COLORED)
01/11/2018 - 31/10/2020 Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Kejuruteraan Mekanikal dan Pembuatan
01/01/2017 - 31/12/2018 Ketua Pusat
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Mechanical Failure Prevention and Reliability Research Center (MPROVE)
01/07/2017 - 31/10/2018 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Mekanik (JKM)
01/02/2016 - 31/01/2017 Felo Pelajar Tanpa Asrama
Pusat Pembangunan Dan Pengembangan Pelajar, Pusat Perumahan Dan Pengangkutan Pelajar (P2P)
01/02/2015 - 31/01/2016 Felo Pelajar Tanpa Asrama
Pusat Pembangunan Dan Pengembangan Pelajar, Pusat Perumahan Dan Pengangkutan Pelajar (P2P)

YearDescriptionRoleLevel
2021 - 9999Institute of Material Malaysia (IMM) Profesional Member Kebangsaan
2021 - 9999International Association Of Computer Science & Information Technology (IACSIT) Senior Member Antarabangsa
2004 - 9999Board of Engineers Malaysia (BEM) Jurutera Siswazah Kebangsaan
2023 - 2025Malaysia Board of Technologists (MBOT) Profesional Technologist Kebangsaan
2018 - 2024Malaysia Board of Technologists (MBOT) Teknologis Profesional Kebangsaan
2000 - 2024Institute of Material Malaysia (IMM) Ahli Kebangsaan
2022 - 2023Board of Engineers Malaysia (BEM) Professional Engineer Kebangsaan
2022 - 2023Malaysia Board of Technologists (MBOT) Professional Member Kebangsaan
2020 - 2020Board of Engineers Malaysia (BEM) Jurutera Profesional Kebangsaan
2019 - 2020Institute of Material Malaysia (IMM) Professional Membership Kebangsaan
2019 - 2020Majlis Rekabentuk Malaysia (MRM) Ahli Kebangsaan
2019 - 2019Board of Engineers Malaysia (BEM) Jurutera Profesional Kebangsaan
2018 - 2018The Institution of Engineers, Malaysia (IEM) Member Kebangsaan
2016 - 2016The Institution of Engineering and Technology (IET) Ahli Antarabangsa
2012 - 2013American Society Of Mechanical Engineers (ASME) Ahli Antarabangsa
2008 - 2008The Institution of Engineers, Malaysia (IEM) Graduate Member Kebangsaan
2000 - 2000International Association Of Computer Science & Information Technology (IACSIT) Ahli Antarabangsa
2000 - 2000International Association of Engineers (IAENG) Ahli Antarabangsa
2000 - 2000The IAENG Society Of Mechanical Engineering Ahli Antarabangsa
2000 - 2000The IAENG Society Of Scientific Computing Ahli Antarabangsa
2000 - 2000The IAENG Society of Engineering Ahli Antarabangsa
2000 - 2000The Institution of Engineers, Malaysia (IEM) Ahli Kebangsaan

YearDescriptionLevel
2024 Course Coordinator for Penyelaras Kursus MDM11303 Sem 2 2023-2024, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2024 University
2024 Design & Analysis Of Pressure Vessel [MDM11303], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 University
2024 Finite Element Method [BDA31003], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 University
2024 Mechanics Engineering Laboratory Iii [BDA37601], Session 20242025 Semester 1, Universiti Tun Hussein Onn Malaysia, 2024 University
2024 Member for AHLI JAWATANKUASA TASKFORCE PEMURNIAN SILIBUS PROGRAM SARJANA KEJURUTERAAN MEKANIKAL (KERJA KURSUS)- (MDM) FKMP UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2024 University
2024 Solid Mechanics I [BDA10903], Session 20242025 Semester 1, Universiti Tun Hussein Onn Malaysia, 2024 University
2023 External Assessor / External Reviewer for Panel Penilai "Bachelor of Materials and Manufacturing Technology (TAR UMT)", MQA & MBOT, Malaysia, March 2023 National
2023 Fatigue And Fracture Mechanics [BDC40403], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 University
2023 Finite Element Method [BDA31003], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 University
2023 Instructor/lecturer for Penceramah Bagi Kurusu MDC10101 Methodologi Penyelidikan Semester 2 Sesi 2022/2023., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023 University
2023 Instructor/lecturer for Penceramah MDC10101, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, April 2023 University
2023 Intergrated Engineering Design [BDA40804], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 University
2023 Solid Mechanics I [BDA10903], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 University
2022 Advanced Fracture Mechanics [MDM11203], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Course Coordinator for MDM11203: Advanced Fracture Mechanics, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2022 University
2022 Finite Element Method [BDA31003], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Mechanics Engineering Laboratory I [BDA17301], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Member for Bengkel Permurnian Program dan Penyediaan Modul Program Pascasiswazah FKMP., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2022 University
2022 Solid Mechanics I [BDA10903], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Statics [BDA10203], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2021 Finite Element Method [BDA31003], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 University
2021 Statics [BDA10203], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 University
2020 Finite Element Method [BDA31003], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 University
2020 Finite Element Method [BDA31003], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 University
2019 Solid Mechanics Ii [BDA20903], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 Solid Mechanics Ii [BDA20903], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 Solid Mechanics Ii [BDA30303], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 University
2018 Solid Mechanics Ii [BDA20903], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Solid Mechanics Ii [BDA20903], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2017 Solid Mechanics Ii [BDA20903], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Solid Mechanics Ii [BDA20903], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Engineering Laboratory Vi [BDA37301], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Solid Mechanics Ii [BDA20903], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Solid Mechanics Ii [BDA20903], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Solid Mechanics Ii [BDA30303], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2015 Finite Element Method [BDA31003], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Solid Mechanics Ii [BDA20903], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Solid Mechanics Ii [BDA20903], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Solid Mechanics Ii [BDA30303], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Finite Element Method [BDA40303], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Fracture & Failure Mechanism [MDM10503], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Solid Mechanics Ii [BDA20903], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Solid Mechanics Ii [BDA20903], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Solid Mechanics Ii [BDA30303], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Solid Mechanics Ii [BDA30303], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Solid Mechanics Ii [BDA3033], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Fracture & Failure Mechanism [MDM10503], Session 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Product Lifecycle Management [MDM10904], Session 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Solid Mechanics I [BDA10903], Session 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Solid Mechanics Ii [BDA20903], Session 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Fatigue And Fracture Mechanics [BDC4053], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Mechanics Of Machine [BDA20303], Session 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Mechanics Of Machine [BDA20303], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Mechanics Of Machine [BDA2033], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Product Lifecycle Management [MDM10904], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2008 Solid Mechanics Ii [BDA3033], Session 20072008 Semester 2, Universiti Tun Hussein Onn Malaysia, 2008 University
2007 Engineering Lab Iii [BDA2711], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Fracture Mechanic [BKM4233], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Stress Analysis [BDC4033], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 University

CodeTitleDesignationEnd Date
K484 Predictions of Low-Velocity Impact Performances and Damages of Fiber Reinforced Composites Using Machine Learning Models. Ketua 30/09/2026
Q497 Assessment of Near-Surface Cracks in Solid Railroad Axles to Prevent Catastrophic Failure Using Finite Element Method Ketua 30/06/2025
Q242 Finite Element Analysis of Multiple Axial Cracks in Thin-Walled Cylinders Ketua 15/05/2024
K195 Dynamic response of AL 2024-T3 aluminium plates impacted by projectile using small and medium scale of cluster parallel computing Ahli 30/11/2023
H918 Numerical Simulation of Quasi-Static Compression Response of Lattice Core Sandwich Panels Ahli 30/06/2023
H971 Utilization of bamboo for sustainable energy absorbing device for automotive application Ahli 30/06/2023
H829 Performance enhancement of thermal storage tank integrated with syntactic foam microencapsulated phase change material for solar water applications Ahli 14/11/2022
M063 Design, Simulation and fabricate the new static removal jig for automative front lens Ahli 31/10/2022
K152 Modification of Thermal Spray Coating HVOF Deposition Parameters to Mechanical Properties of Carbon Steel Ahli 31/05/2022
K068 Hemodynamic effect on femoropopliteal artery stenting for severe physical and physiological conditions Ahli 31/03/2022
M035 SIMULATION ANALYSIS OF NEW TRAIN BOGIE SYSTEM WITH PROTOYPE Ahli 15/03/2022
H869 New Train Bogie Suspension and Auto-Steering Axle Mechanism Ahli 14/03/2022
H276 ANISOTROPIC DAMAGE CONSTITUTIVE FORMULATION OF ADVANCED HIGH STRENGTH STEELS (AHSS) FOR HIGH STRAIN RATE APPLICATION Ahli 31/10/2021
H575 Energy Absorption of Crash Box under Axial and Oblique Test. Ketua 31/07/2021
K136 Design, Build and Flight Test of A High Payload Cargo Drone System (C-Drone) Ahli 30/04/2021
H613 Adaptation of Fraunhofer Model into Malaysia's Innovation Ecosystem (Phase II - Creation Area & Demonstration Area) Ahli 31/12/2020
U870 Characterization of Functionally Graded Natural Fiber Reinforced Polymer Composites Ahli 31/08/2019
1592 Failure Prevention of Stents due to Hemodynamic and Arterial Wall Interactions. Ketua 31/07/2019
1547 Correction on the Conventional Constitutive Formulation to Predict Three Dimensional Stress-State of Deformation Behaviour in Commercial Aluminum Alloys Undergoing High Velocity Impacts Ahli 30/04/2019
1549 Sound Absorption Characteristics of Micro-Perforated Membrane-Fabric Integrated Materials by using Impedance Tube Method and Finite Element Analysis Ahli 30/04/2019
1483 Using Tribologi Technology And Know-How At Titanium Dioxide Digestion Process To Improve Continuous Digester Blade Wear And Degradation Rates Thereby Enhancing Productivity Ahli 28/02/2017
E042 Improving Mouthguard Design To Enhance Physical Performance Of Athletes Ahli 30/11/2016
U119 Development of Auto Feeder With Pneumatic Control Systems To Produce High Glossy Acrylic Door Panel at Taishi Tech Industries, SDN. BHD. Ahli 01/10/2016
1277 Kitchen Exhaust Ventilation: Promotion Of The Establishment On The Integrated Sustainable Industrry At R&D Halton Group Sdn. Bhd. Ahli 31/05/2016
1420 A New Algorithm Framework of Granular Fertilizer Boom Sprayer Simulation for Paddy Fields Production Ahli 31/05/2016
1424 Investigations of Kenaf Fiber Reinforced Composites for Automotive Crash Energy Absorbing Structures Ketua 31/05/2016
R034 Experimental Study and Numerical Modelling of CFRP Hybrid Adhesively Bonded Bolted Joints Ahli 29/02/2016
R019 Woven Fabric Based Natural Fibers Reinforced Composites for Automotive Crashworthiness applications Ahli 15/12/2015
1206 Sound Characterisation of Traditional Musical Instrument Kompang to Reproduce Digital Synthesizer Ahli 30/09/2015
R011 Evaluation of novel plasticity type wear model for lifing prediction in aeroengine components. Ahli 28/02/2015
B022 NOODLES PACKAGING MACHINE Ahli 08/02/2015
B025 FRICTION AND WEAR TEST MACHINE Ahli 08/02/2015
C016 Tajuk Program : Sustainable Integrated Direct Recycling Of Aluminium Industrial Waste Tajuk Projek : Hot Press Forging And Hot Extrusion For Direct Recycling Chip Aluminium Ahli 31/12/2014
R010 Modelling of elastoplastic-damage constitutive model for plastic dynamic behaviour in automotive and earospace structures Ahli 15/12/2014
1378 Numerical Investigation Of Textile Composite Under Impact Loading Ketua 31/10/2014
B012 AUTOMATIC COCONUT BUTTER (KERISIK) PACKAGING MACHINE Ahli 01/09/2014
B013 AUTOMATED SPRINKLING SYSTEM FOR "KUIH KOYE" MIXING MACHINE Ketua 01/09/2014
B014 AUTOMATED GRATED COCONUT DRYING MACHINE Ahli 01/09/2014
1245 Crashworthiness Aspects Of Hybrid Tube Composite Due To Eccentric Loadings Ketua 31/08/2014
1246 Numerical Study On Crashworthiness Aspects Of Hybrid Tube Composite Ketua 31/08/2014
1001 Stress Intensity Factors Analysis of Multiple Surface Cracks in Mechanical Components Ketua 31/03/2014
0367 Fatigue and Facture in Powder Metallurgical Aluminium Matrix Composites Ahli 30/04/2010
0263 Crashworthiness Behavior Of Foam-Filled Automotive Structures Ketua 31/12/2008
0154 Powder Compaction Analysis by Acoustic Emision and Ultrasonic Testing Ketua 07/08/2007
0222 Dynamic Energy Absorption Performance of Conical Filament Winding Composites Ketua 31/05/2007
0131 Impact Behavior of Palm-oil Fiber Reinforced Composites Ketua 28/02/2006

Book
Al Emran Ismail
(2020) Advances In Mechanical, Manufacturing And Aerospace Engineering: Series 1, UTHM , 1, ISBN:9789672916567
Al Emran Ismail
(2020) Step-By-Step Solutions: Problems In Solid Mechanics 2, UTHM , 1, ISBN:9789672216995
Al Emran Ismail, Eliza M. Yusup
(2019) Green Materials For Engineering Applications, UTHM , 1, ISBN:9789672216797
Al Emran Ismail
(2015) Retak Pada Silinder Padu: Pendekatan Mekanik Patah, UTHM , 1, ISBN:9789670764238
Al Emran Bin Ismail
(2013) Mechanical & Manufacturing Engineering, Trans Tech Publications , 1050, ISBN:978303785635 2
Al Emran Bin Ismail
(2012) Abstract Book Of International Conference On Mechanical & Manufacturing Engineering (Icme2012), Tiada , 200, ISBN:3215776301
Al Emran Bin Ismail
(2012) Interacting Crack Analysis Using Finite Element Method, InTech , 357, ISBN:9789535108979
Al Emran Bin Ismail
(2008) Abstract Book Of International Conference On Mechanical & Manufacturing Engineering (Icme2008), UTHM , 1, ISBN:9789832963592
Book Chapters
Al Emran Ismail and Justin Anak Empaling
(2021) Effect Of Stacking Sequences On The Energy Absorption Performances Of The Rectangular-Shaped Crash Boxes Reinforced Hybrid Composites, Structural Health Monitoring System For Synthetic, Hybrid And Natural Fiber Composites, Springer , 195, ISBN:9789811588402
Al Emran Ismail, Muhammad Syafiq Abdul Rahman
(2021) Energy Absorption Of Tilted Rectangular Composite Crash Boxes, Structural Health Monitoring System For Synthetic, Hybrid And Natural Fiber Composites. Composites Science And Technology, Springer , 207, ISBN:9789811588402
Lukmon O. Afolabi, Abdulhafid M. A. Elfaghia, Djamal Hissein Didane, Al Emran. Ismail, Norasikin Mat Isa
(2020) Assessment Of Thermal Energy Storage Integrated Solar Thermal Collector System: A Review, Advances In Mechanical, Manufacturing And Aerospace Engineering, Series 1, UTHM , 27, ISBN:9789672916567
Zainun Achmad, Al Emran Ismail
(2020) Experimental Study Of Fatigue Age On Sup-9 Leaf Spring Steel Which Received Heat Treatment And Shot Peening Processes, Advances In Mechanical, Manufacturing And Aerospace Engineering: Series 1, UTHM , 1, ISBN:9789672916567
Kamarul-Azhar Kamarudin, Al Emran Ismail, Iskandar Abdul Hamid , Ahmad Sufian Abdullah
(2019) Computationally Efficient Modeling Of Woven Composites Under Uniaxial Stress, Modelling Of Damage Processes In Biocomposites, Fibre-Reinforced Composites And Hybrid Composites, Elsevier , 103, ISBN:9780081022894
TM Hafeez, MN Hafsa, N Kassim, S Ismail, AE Ismail, M. Hazwan Md. Jamal
(2019) Crashworthiness Characteristic Of Woven Kenaf Fabric Reinforced Composites Tube, Green Material For Engineering Application, UTHM , 68, ISBN:9789672216797
AE Ismail, NH Abdullah, KA Kamarudin
(2019) Crushing Of Woven Cylindrical Kenaf Fiber Reinforced Composites, Green Material For Engineering Application, UTHM , 1, ISBN:9789672216797
KA Kamarudin, MNM Hatta, AAA Rahman, R Hussina, AS Abdullah, AE Ismail
(2019) Mechanical Properties Of Cockle Shells With Sucrose As Binder, Green Material For Engineering Application, UTHM , 8, ISBN:9789672216797
Al Emran Ismail, Kamarul-Azhar Kamarudin
(2019) Modeling Of Crushing Mechanisms Of Hybrid Metal/Fiber Composite Cylindrical Tubes, Modelling Of Damage Processes In Biocomposites, Fibre-Reinforced Composites And Hybrid Composites, Elsevier , 27, ISBN:9780081022894
Muhammad Eka Novianta, Al Emran Ismail, Kamarul-Azhar Kamarudin
(2019) Roles Of Layers And Fiber Orientations On The Mechanical Durability Of Hybrid Composites, Modelling Of Damage Processes In Biocomposites, Fibre-Reinforced Composites And Hybrid Composites, Elsevier , 41, ISBN:9780081022894
Kamarul-Azhar Kamarudin, Mohd Khir Mohd Nor, Al Emran Ismail, Iskandar Abdul Hamid, Ahmad Sufian Abdullah
(2018) Progressive Damage Modeling Of Synthetic Fiber Polymer Composites Under Ballistic Impact, Modelling Of Damage Processes In Biocomposites, Fibre-Reinforced Composites And Hybrid Composites, Woodhead Publishing Series in Composites Science and Engineering , 115, ISBN:9780081022894
General Publications
Al Emran Ismail, Nik Hisyamudin Muhd Nor
(2022) Fem Analysis On Hydraulic Jacks Performed Under Test Method Bidirectional Pile Load Test, UTHM , 1, ISBN:-
Normayati Nordin, Ahmad Jais Alimin, Mohammad Kamil Abdullah, Mohd Faizal Mohideen Batcha, Mas Fawzi Mohd Ali, Shahruddin Mahzan @ Mohd Zin, Al Emran Ismail, Khairuddin Alias, Sufizar Ahmad, Bukhari Manshoor, Reazul Haq Abdul Haq, Azlin Masah
(2022) Garis Panduan Pentauliahan Pengurus Tenaga Elektrik Berdaftar (Pte) Melalui Program Sarjana Sains Kejuruteraan Tenaga Lestari (Mdl), UTHM , -, ISBN:-
Normayati Nordin, Reazul Haq Abdul Haq, Bukhari Manshoor, Al Emran Ismail, Shamsulkhairi Md Salleh, Razif Salim, Abdul Hadi Mohamed Zainal
(2022) Manual Pendaftaran Pengurus Tenaga Elektrik Berdaftar (Pte) Melalui Sistem Ecos Bagi Graduan Sarjana Sains Kejuruteraan Tenaga Lestari (Mdl), UTHM , -, ISBN:-
BUKHARI BIN MANSHOOR, AL EMRAN BIN ISMAIL, SHAMSULKHAIRI BIN MD SALLEH, REAZUL HAQ BIN ABDUL HAQ, RD KHAIRILHIJRA' BIN KHIROTDIN, HO FU HAW, NORMAYATI BT NORDIN, SHARIFAH ADZILA BT SYED ABU BAKAR, SAID BIN AHMAD, ISHKRIZAT BIN TAIB, MOHD NASRULL BIN ABDOL RAHMAN, SUFIZAR BT AHMAD, LEE WOON KIOW, NOORMAZIAH BT JAFFERI, RAZIF BIN SALIM, ABDUL HADI BIN MOHAMED ZAINAL, HELYYANA BT YATIM
(2021) Fkmp Postgradute Programmes Handbook V 2.0, UTHM , 1, ISBN:-
Saizalmursidi Md Mustam, Mohd Ezree Abdullah, Nik Hisyamudin Muhd Nor, Nadirul Hasraf Mat Nayan, Dzulfitry Ameen IskandarIshak Baba, Nor Hazana Abdullah, Suraya Hani Adnan, Al Emran Ismail, Shahiron Shahidan, Faisal Sheikh Khalid & Muhammad Suhaimi Sulong
(2021) Garis Panduan Pelantikan Sekolah Angkat, UTHM , 1, ISBN:-
Mohd Ezree Abdullah, Saizalmursidi Md Mustam, Nik Hisyamudin Muhd Nor, Nadirul Hasraf Mat Nayan, Ishak Baba, Nor Hazana Abdullah, Suraya Hani Adnan & Al Emran Ismail
(2021) Garis Panduan Penganjuran Program Hubungan Masyarakat, UTHM , 1, ISBN:-
N. Nordin, R. H. A. Haq, A. E. Ismail, B. Manshoor, S. Mahzan, S. Ahmad, K. Alias, M. F. M. Batcha, A. N. Mohammed, A. Hariri, N. M. Isa, D. H. Didane, M. A. Razali, M. F. M. Ali, A. J. Alimin, W. S. I. W. Salim, Z. Noranai, M. K. Abdullah, N. F. Nasir, A. F. Idris, I. Taib, S. A. Osman, H. Zakaria, S. H. Amirnordin, A. Sapit, M. F. Sies, S. Sabudin, H. Salleh, S. M. Seri, H. F. Haw, L. W. Kiow, N. Jafferi, R. Salim, A. H. M. Zainal, N. Baidawi
(2021) Kertas Kerja Mqa 02 Cadangan Akreditasi Penuh Program Sarjana Sains Kejuruteraan Tenaga Lestari (Kerja Kursus), UTHM , -, ISBN:-
Muhd. Hafeez Zainulabidin, Eliza M.Yusup, Zaleha Mohamad, Noradila Abdul Latif, Abdulhafid M A Elfaghi, Sri Yulis M Amin, Al Emran Ismail, Kamarul-Azhar Kamarudin
(2020) Bda 31003 Finite Element Method, UTHM , 1, ISBN:-
Normayati Nordin, Sufizar Ahmad, Al Emran Ismail, Reazul Haq Abdul Haq, Hamidon Salleh, Razif Salim
(2019) Laporan Lawatan Kerja Penanda Aras Antara Sarjana Sains Kejuruteraan Tenaga Lestari, Universiti Tun Hussein Onn Malaysia (Uthm) Dan Sarjana Sains Pengurusan Tenaga, Universiti Teknologi Malaysia (Utm), UTHM , -, ISBN:-
Nik Hisyamudin Muhd Nor, Nor Azizi Yusof, Mohd Azwir Azlan, Sia Chee Kiong, Al Emran Ismail, Mohd Fahrul Hassan, Sallehuddin Shah Ayop
(2017) Yjack Validation Test Program - Finite Element Modeling , UTHM , 1, ISBN:-
Nor Azizi Yusof, Sallehuddin Shah Ayop, Nik Hisyamudin Muhd Nor, Mohd Azwir Azlan, Sia Chee Kiong, Al Emran Ismail, Mohd Fahrul Hassan
(2017) Yjack Validation Test Program - Structural Laboratory Tests , - , 1, ISBN:-
Journal
Tezara Cionita, Jamiluddin Jaafar, Ling-Shing Wong, Januar Parlaungan Siregar, Al Emran Ismail, Mohamad Farid Sies, Agustinus Purna Irawan, Agung Efriyo Hadi
(2024) A Brief Review On The Utilization Of Biopolymers In The Manufacturing Of Natural Fiber Composites, JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, TAYLOR'S UNIVERSITY, MALAYSIA , 3, 52, ISSN:18234690
Md. Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid
(2024) A Review Of Experimentation Numerical Simulation Of Low-Velocity Impact Performances And Damages Of Fiber-Reinforced Composites, JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 11, 147, ISSN:22897895
Muhammad Fadhil Sahrom, Muhammad Khairuddin Awang, Mohammad Sukri Mustapa, Al Emran Ismail, Jamiluddin Jaafar, Omar Mohammed Al-Moayed, Ali Kamil Kareem
(2024) Crushing Performances Of Kenaf Fibre Reinforce Composite Tubes, JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 4, 130, ISSN:22897895
Yusra Solehah Suwandi, Saifulnizan Jamian, Dalila Mohd Harun, Kamarul-Azhar Kamarudin, Al-Emran Ismail, Azlan Abdul Aziz, Elwaled Awad Khidir
(2024) Effect Of Welding Heat Input On The Mechanical Properties Of Mild Steel At Coarse Grain Heat Affected Zone (Cghaz), JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 4, 145, ISSN:22897895
Omar Mohammed Al-Moayed, Johan M.F, Al Emran Ismail, Ali Kamil Kareem, Saifulnizan Jamian, Sufian Farid Shaker, Tareq Hamad Abed, Omar Hammad Aldulaym
(2024) Interaction Assessment Of Stress Intensity Factors Of Surface Cracks On Thick Cylinders Under Tension Force And Bending Moment, JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 6, 131, ISSN:22897895
Al-Moayed, O.M., Al Emran Ismail, Kareem, Ali K.
(2024) Interaction Of External Surface Cracks On Thick Cylinders Under Mode Iii Moment And Combined With Mode I Loading , INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SEVENTH SENSE RESEARCH GROUP , 5, 51, ISSN:22315381
Letchumanan, S.M., Arifin, A.M.T., Ismail, A.E. and Taib, I.
(2023) A Review On Carbon Fiber Reinforced Polymer As Wrapping Structures For Pipeline, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE), UTHM , 4, 45, ISSN:2229838X
Omar Mohammed Al-Moayed, Al Emran Ismail, Ali Kamil Kareem, Saifulnizan Jamian, Gabriel de Castro Coêlho
(2023) Interaction Of Double Parallel Cracks Located On A Hollow Cylinder., LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, UNIV SAO PAULO, GROUP SOLID MECHANICS & STRUCTURAL IMPACT , 10, 1, ISSN:16797825
Ali K. Kareem , Mustafa M. Gabir , Inas R. Ali, Al E. Ismail, Ishkrizat Taib, Nofrizalidris Darlis and Omar M. Almoayed
(2022) A Review On Femoropopliteal Arterial Deformation During Daily Lives And Nickel-Titanium Stent Properties, JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY , TAYLOR & FRANCIS , 3, 300, ISSN:03091902
Kareem A.K., Gabir M.M., Almoayed O.M., Ismail, Taib, Darlis N., Ali I.R.
(2022) A Systematic Review On Cardiovascular Stent And Stenting Failure: Coherent Taxonomy, Performance Measures, Motivations, Open Challenges And Recommendations, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 3, 102, ISSN:2229838X
Muhammad Ikhwan Roslim, Mohamad Ridzuan Jamli, Al Emran Ismail, Muhamad Arfauz A Rahman
(2022) Experimental Analysis On Machining Properties In Turning Of Nimonic C-263, INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SEVENTH SENSE RESEARCH GROUP , 11, 144, ISSN:23490918
Nur Izzah Hamdan, Muhd. Hafeez Zainulabidin, Al Emran Ismail, Angzzas Sari Mohd Kassim
(2021) A Review On The Development Of Panel And Membrane Sound Absorbers, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 1, 60, ISSN:229-838X
Nurul Hayati Ismail, Mohd Norihan Ibrahim, Al Emran Ismail
(2021) Dynamic Response Analysis Of Frontal Crash On Vehicle Against Lighting Column Using Fem, JOURNAL OF ADVANCED MECHANICAL ENGINEERING APPLICATIONS, UTHM , 12, 74, ISSN:27166201
M. A. M. Halmi, M. A. Harimon, A. E. Ismail, D. Chue
(2021) Fatigue Behaviour Of High Velocity Oxy-Fuel Coatings On Medium Carbon Steel, INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SEVENTH SENSE RESEARCH GROUP , 6, 56, ISSN:22315381
Muhammad Hilman Karem, Al Emran Ismail
(2021) Finite Element Analysis Of Piston For Structural Assessments, JOURNAL OF SUSTAINABLE ANDMANUFACTURING IN TRANSPORTATION, UTHM , 12, 8, ISSN:28212835
Sabah Salim Hamza, Al Emran Ismail, M. Y. Yuhazri, Ahmad Hamdan Ariffin and Mohamed Thariq Hameed Sultan
(2021) Hybridization Effect On Crashworthiness Parameters Of Natural Composite, FRONTIERS IN MATERIALS, FRONTIERS MEDIA S.A. , 2, 1, ISSN:22968016
Shafizah Sa'adon , Mohamed Nainar Mohamed Ansari , Saiful Izwan Abd Razak, Joseph Sahaya Anand, Nadirul Hasraf Mat Nayan, Al Emran Ismail , Muhammad Umar Aslam Khan and Adnan Haider
(2021) Preparation And Physicochemical Characterization Of A Diclofenac Sodium-Dual Layer Polyvinyl Alcohol Patch, POLYMERS , MDPI , 7, 2459, ISSN:20734360
Zainun Achmad, Al Emran Ismail, Mohd Azhar Harimon
(2021) Study Of Fatigue Life On Aluminium Composites ¿ Fly Ash Received T6 Heat Treatment And Artificial Aging, INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SEVENTH SENSE RESEARCH GROUP , 2, 12, ISSN:23490918
Zainun Achmad, Al Emran Ismail, Ahmad Hamdam
(2021) The Effect Of A Mixture Of Epoxy Resin Matrix Composite Materials And Hardener By Varying The Stirring Speed On The Mechanical Properties, INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SSRG , 11, 83, ISSN:23490918
Al Emran Ismail, Abdul Fatah Mat Beyi
(2020) A Brief Of Sources Of Injury And Failure During Stent Implantation, INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 3, 667, ISSN:23473983
Jeffery Jep Brown, Al Emran Ismail
(2020) A Review Of Shape Variations And Test Angles For Crash Box Application, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 2, 883, ISSN:22783091
Kareem, A., Fakhri, O., Ismail, A.E, Taib, I., Ali, I., & Nemah, M. N.
(2020) Comparative Computational Study Of Mechanical Behavior In Self-Expanding Femoropopliteal Stents, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 1, 210, ISSN:2229838X
Sami Al-Alimi, M.A. Lajis, S. Shamsudin, B.L. Chan, Yahya Mohammed, Al Emran Ismail, N. M. Sultan
(2020) Development Of Metal Matrix Composites And Related Forming Techniques By Direct Recycling Of Light Metals: A Review, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 1, 144, ISSN:26007916
SABAH SALIM HAMZA, MOHD. YUHAZRI YAAKOB, AL EMRAN BIN ISMAIL & SALIH MERI AL ABSI
(2020) Effect Of Geometric Shape On The Crushing Performance Of Natural Jute Mat/Epoxy Specimens Under Axial Quasi-Static Compression, INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH AND DEVELOPMENT, TRANS STELLAR PUBLISHING , 4, 571, ISSN:22496890
O. M. Al-moayed, A. K. Kareem, A. E. Ismail, S. Jamian, M. N. Nemah
(2020) Influence Coefficients For A Single Superficial Cracked Thick Cylinder Under Torsion And Bending Moments, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 5, 132, ISSN:2229838X
Sabah Salim Hamza, AL Emran Bin Ismail, Mohd. Yuhazri Yaakob, Salih Meri AL Absi
(2020) Influence Of Geometrical Shape On The Crashworthiness Performance Of Tubular Jute Mat/Epoxy Composite Specimens, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, INTERNATIONAL JOURNALS OF ENGINEERING AND SCIENCES PUBLISHER , 5, 1, ISSN:22272771
Zainun Achmad Karmo Main, Al Emran Ismail
(2020) Potential Applications Of Fly-Ash And Sisal Hybrid Fibre Reinforced Plastic Composites, SSRG INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SEVENTH SENSE RESEARCH GROUP , 7, 34, ISSN:23490918
AL EMRAN ISMAIL, MOHD ZUBIR MOHD GHAZALI & MUHAMMAD KHAIRUDIN AWANG
(2020) Pressure Vessel Reinforcement Pad Design By Finite Element Analysis, INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH AND DEVELOPMENT, TRANS STELLAR PUBLISHING , 4, 369, ISSN:22496890
Jeffery Jep Brown, Al Emran bin Ismail, Dave Kidau anak Willie Chiak Mong
(2020) Simulation Study Of Elliptical Thin Walled Structure Crash Box With Holed Initiator Through Axial And Oblique Impact, INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH,, WARSE , 8, 4084, ISSN:23473983
Al Emran Ismail
(2020) Solutions Of Stress Intensity Factors Of Surface Crack In Round Bars Under Combined Bending And Torsion Moment Using Ansys Finite Element Analysis, TECHNOLOGY REPORTS OF KANSAI UNIVERSITY, KANSAI UNIVERSITY , 4, 1753, ISSN:04532198
Tiau See Ping, Salihatun Md Salleh, Muhammad Al Hafiz Yusoff, Ainul Husna Mohd Yusoff, Nasrull Abd Rahman, Al Emran Ismail, and Moch. Agus Choiron
(2020) Static And Dynamic Analysis Of Selective Leverage System Gear Train , JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 2, 1189, ISSN:15461963
Abdul Fattah Mat Beyi, Al Emran Ismail, Ishkrizat Taib, Mohd Norihan Ibrahim
(2020) Stent Classifications And Effect Of Geometries On Stent Behaviour Using Finite Element Method, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH , 3, 329, ISSN:22780149
Al Emran Ismail
(2020) Stress Intensity Factors Of Cracks In Solid Cylindrical Bars Using Ansys Finite Element Analysis, INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH, WARSE , 6, 1395 , ISSN:23473983
Al Emran Ismail, Mohd Zubir Mohd Ghazali
(2020) The Development Of Reinforcement Pad Design For Pressure Vessel, INTERNATIONAL JOURNAL OF RECENT TECHNOLOGY AND ENGINEERING (IJRTE), BLUE EYES INTELLIGENCE ENGINEERING & SCIENCES PUBLICATION , 1, 267, ISSN:22773878
Rino Andias, M.A. Haikal Ahmad, M. Zulafif Rahim, RHA Haq, A. M Sabri, N. Hafizah Aziz, Ahmad Mubarak Tajul Ariffin, Al Emran Ismail, Rasidi Ibrahim
(2020) The Influence Of Graphitization Catalyst Electrode In Electrical Discharge Machining Of Polycrystalline Diamond-Finishing Condition, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, PENERBIT UTHM , 2, 211, ISSN:2229838X
Mohammed Najeh Nemah, Cheng Yee Low, Omar Hammad Aldulaymi, Pauline Ong, Abdullah Ali Qasim
(2019) A Review Of Non-Invasive Haptic Feedback Stimulation Techniques For Upper Extremity Prostheses, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 5, 299, ISSN:2229-838
Paisal, M.S.A., Taib, I., Ismail, A.E., Arifin, A.M.T., Darlis, N.
(2019) An Analysis Of Blood Pressure Waveform Using Windkessel Model For Normotensive And Hypertensive Conditions In Carotid Artery, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Akademia Baru , 5, 69, ISSN:22897879
Al Emran Ismail, Kamarul Azhar Kamarudin, Mohd Khir Mohd Nor, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim and Mohammad Zulafif Rahim
(2019) Calculating Of Stress Intensity Factors Of Soldered Joints With Multiple Cracks, INDONESIAN JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCEMULTIPLE CRACKS, IAESCORE , 4, 284, ISSN:25024752
Fazimah Mat Noor, Muhamad Iqbar Abu Bakar, Zaleha Mohamad, Al Emran Ismail, Maznan Ismon, Sufizar Ahmad, Azzura Ismail, Hanani Abd Wahab, Nor Mazlana Main, Shahmir Hayyan Sanusi
(2019) Composition And Type Of A Binder Effects On The Stainless Steelfoam Microstructure Prepared By Sponge Replication Method, NTERNATIONAL JOURNALOF INTEGRATED ENGINEERING, UTHM , 11, 90, ISSN:2229838X
O. M. Al-Moayed , A. K. Kareem, A. E. Ismail, S. Jamian, M. N. Nemah
(2019) Distribution Of Mode I Stress Intensity Factors For Single Circumferential Semi-Elliptical Crack In Thick Cylinder, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 102, ISSN:2229838X
Norzarina Maat, Mohd Khir Mohd Nor, Choon Sin Ho, Noradila Abdul Latif, Al Emran Ismail, Kamarul-Azhar Kamarudin, Saifulnizan Jamian, Mohd Norihan Ibrahim@Tamrin , Muhamad Khairudin Awang
(2019) Effects Of Temperatures And Strain Rate On The Mechanical Behaviour Of Commercial Aluminium Alloy Aa6061, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit Akademia Baru , 2, 21, ISSN:22897879
Choiron, M.A., Yaqin, M.A., Ismail, A.E., Zin, S.M.-M.
(2019) Energy Absorption And Deformation Pattern On Two Segment Crash Box With Rubber Connection Variation, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Akademia Baru , 3, 20, ISSN:22897879
Sabah Salim Hamza, Mohd Yuhazri Yaakob, Al Emran Ismail, Salih Meri Al Absi
(2019) Influence Of Geometric Shape On The Deformation Performance Of Natural Jute/Epoxy Specimens Under Axial Quasi- Static Compression, TEST ENGINEERING & MANAGEMENT, MATTINGLEY PUBLISHING CO., INC. , 12, 719, ISSN:01934120
Hanani Abd Wahab, Muhamad Zariq Imran Abdul Manap, Al Emran Ismail, Ong Pauline, Maznan Ismon, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Zaleha Mohamad
(2019) Investigation Of Temperature And Humidity Control System For Mushroom House, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING , UTHM , 9, 27, ISSN:2229838X
AK Kareem, OM Fakri, AE Ismail, Ishkrizat Taib, Mohammed Najeh Nemah
(2019) Mechanisms And Treatment Of Femoropoplitealin-Stent Restenosis, TEST ENGINEERING & MANAGEMENT, MATTINGLEY PUBLISHING CO., INC. , 12, 704, ISSN:01934120
Muhammad Sufyan Amir Paisal, Ishkrizat Taib, Al Emran Ismail, Ahmad Mubarak Tajul Arifin
(2019) Numerical Analysis On The Effect Of Normotensive And Hypertensive Physiological Conditions Onto Hemodynamic Characteristics In Stented Carotid Artery, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING IJMME-IJENS, IJENS , 3, 94, ISSN:22272771
zaleha
(2019) The Characterization Of Eggshell Waste By Using Polymeric Foam Replication Method, TEST ENGINEERING AND MANAGEMENT, MATTINGLEY PUBLISHING CO., INC. , 12, 1071, ISSN:01934120
M. Azham Azmi
(2019) Vibration Exposure Of Polydimethylsiloxane (Pdms) Reinforced Silica (Sio2): Comparison Of Different Source Of Silica (Sio2) As Filler, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, INSTITUTE OF PHYSICS PUBLISHING , 3, 147386, ISSN:17578981
Azmahani Sadikin, Nurul Akma Mohd Yunus, Saiful Anuar Abd Hamid, Al Emran Ismail, Salihatun Salleh, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Sallehuddin Shah Ayop
(2018) A Comparative Study Of Turbulence Models On Aerodynamics Characteristics Of A Naca0012 Airfoil, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 134, ISSN:2229838X
Al Emran Ismail, Saifulnizan Jamian, Kamarul Azhar Kamarudin, Mohd Khir Mohd Nor, Mohd Norihan Ibrahim, Moch. Agus Choiron
(2018) An Overview Of Fracture Mechanics With Ansys, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 10, 59, ISSN:2229838X
Zaleha Mohamad, Al Emran Ismail, S. Mahzan, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Maznan Ismon, Mohd Amran Madlan
(2018) Classification For Damage Severity In Natural Fibre Composites Using Principal Component Analysis, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 147, ISSN:2229838X
Al Emran Ismail, Azmahani Sadikin, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Salihatun Md. Salleh , Sufizar Ahmad , Mohd Baharudin Ridzuan
(2018) Crushing Performances Of Axially Compressed Woven Kenaf Fiber Reinforced Cylindrical Composites, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 189, ISSN:2229838X
Nur Izzah Hamdan, Muhd. Hafeez Zainulabidin, Md Zainorin Kasron, Al Emran Ismail and Angzzas Sari Mohd Kassim
(2018) Effect Of Perforation Size On Sound Absorption Characteristics Of Membrane Absorber , INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 27, ISSN:2229838X
RASIDI IBRAHIM, Chong Yee Long, Chee Yung Ng, Noor Hakim, Sukri Mustapa, Emran Ismail
(2018) Experimental Study On The Degree Of Surface Generation By Edge Preparation Tools In Milling 316l, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation Publisher of International Academic Journals , 12, 80, ISSN:2227-524
Hakimi, M.H., Salleh, S.M., Ainul, H.M.Y., Ngali, M.Z., Ismail, A.E., Rahman, M.N.A., Mahmud, W.M.A.W
(2018) Ice Bath Therapy On Athletes Recovery Response Using Eeg , INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY , Science Publishing Corporation Publisher of International Academic Journals , 12, 438, ISSN:2227524X
Asrizan Kaha, Ishkrizat Taib, Muhammad Sufyan Amir Paisal, Ahmad Mubarak Tajul Arifin, Al Emran Ismail, Norzelawati Asmuin, Reazul Haq Abdul Haq, Surapong Chatpun, Takahisa Yamamoto, Kahar Osman
(2018) Lumped Parameter Modelling In Femoral Popliteal Artery For Normal And Severe Conditions , INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 1193, ISSN:2229-838
Siti Nor Azila Khalid, Al Emran Ismail, Muhd. Hafeez Zainulabidin, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim & Mohammad Zulafif Rahim
(2018) Mechanical Performances Of Twill Kenaf Woven Fiber Reinforced Polyester Composites, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 49, ISSN:2229838X
Azmahani Sadikin, Mohd Khairul Anam Mohd Bahrin, Azzura Ismail, Al Emran Ismail, Sufizar Ahmad, Salihatun Salleh, Mohd Nasrull Abdol Rahman, Azwan Sapit, Sallehuddin Shah Ayop
(2018) Numerical Simulation In Transient Flow Of Non-Newtonian Fluid In Nozzles During Filling Process, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 3, 92, ISSN:2229838X
Azmahani Sadikin, Mohd Khairul Anam Mohd Bahrin, Azzura Ismail, Al Emran Ismail, Sufizar Ahmad, Salihatun Salleh, Mohd Nasrull Abdol Rahman, Azwan Sapit, Sallehuddin Shah Ayop
(2018) Numerical Simulation In Transient Flow Of Non-Newtonian Fluid In Nozzles, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 10, 92, ISSN:2229838X
Kamarul Azhar Kamarudin, Mohamed Nasrul Mohamed Hatta, Ranjhini Anpalagan, Al Emran Ismail, Noor Wahida Ab Baba, Mohd Khir Mohd Noor, Rosniza Hussin, Ahmad Sufian Abdullah
(2018) Seashell Structure Under Binder Influence , JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, AKADEMIA BARU , 3, 122, ISSN:22897879
Maznan Ismon, Ronnie Chai, Al Emran Ismail, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Zaleha Mohamad, Mohd Amran Madlan, Izzuddin Zaman
(2018) Thermal Gradient Pattern Of Shallow Pitting Via Active Thermography ¿ Hot Water And Steam., INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 138, ISSN:26007916
Ismon, M., Chai, R., Ismail, A.E., Zainulabidin, M.H., Noor, F.M., Wahab, H.A., Mohamad, Z., Madlan, M.A., Zaman, I.
(2018) Thermal Gradient Pattern Of Shallow Pitting Via Active Thermography-Water And Steam, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 138, ISSN:2229838X
Al Emran Ismail, Fazimah Mat Noor, Zaleha Mohamad, Mohd Amran Madlan, M. Zulafif Rahim, M. Rasidi Ibrahim, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan, Nik Hisyamudin Muhd Nor
(2017) Effect Of Triggering Angles On The Crushing Mechanisms Of Hybrid Woven Kenaf/Aluminum Hollow Cylinders, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 12, 012034, ISSN:17426588
M.A. Haikal Ahmad, M. Zulafif Rahim, M. F. Mohd Fauzi, N. Hafizah Azis, A.E Ismail, Mohd Fahrul Hassan, A.M.T. Arifin, M.S. Yusof, and M. Rasidi Ibrahim
(2017) Electrical Discharge Machining Of Polycrystalline Diamond Using Copper Electrode - Finishing Condition, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 6, 012019-1, ISSN:1757899X
Ismail A.E, A.K Ariffin, S. Abdullah, M.J Ghazali
(2017) Finite Element Analysis Of J-Integral For Surface Cracks In Round Bars Under Combined Mode I Loading, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 1, ISSN:2229838X
Hilton, A., Al-Emran, I.
(2017) Fracture Energy Of Woven Fabric Kenaf Composite Plates With Different Fiber Orientations , MATERIALS SCIENCE FORUM, Trans Tech Publications Ltd , 2, 56, ISSN:02555476
Muhammad Ikhmal Hanapi, Sufizar Ahmad, Hariati Taib, Al Emran Ismail, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan
(2017) Influence Of Alkali Resistant (Ar) Fibreglass In Porcelain Clay For Manufacturing Vitrified Clay Pipes, JOURNAL OF PHYSICS: CONFERENCE SERIES, INSTITUTE OF PHYSICS PUBLISHING , 9, 1, ISSN:17426588
Al Emran Ismail, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Maznan Ismon, Zaleha Mohamad, Mohd Amran Madlan
(2017) Interactions Of Double Slanted Cracks Under Mode I Modelling, APPLIED MECHANICS AND DYNAMICS, EDP Sciences, 2017 , 5, 1, ISSN:2261236X
AE Ismail, MK Awang, Al Mohd Tobi, MH Ahmad
(2017) Mode I Stress Intensity Factors Of Slanted Cracks, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 3189, ISSN:18196608
Al Emran Ismail, H. Nezere
(2017) Numerical Simulation Of Hybrid Composite Tubes Under Oblique Compression, WORLD JOURNAL OF ENGINEERING, emeraldinsight , 2, 173, ISSN:17085284
S F Lau, M H Zainulabidin, M N Yahya, I Zaman, N A Azmir, M A Madlan, M Ismon, M Z Kasron and A E Ismail
(2017) Optimization Of Sound Absorbers Number And Placement In An Enclosed Room By Finite Element Simulation, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing , 10, 1, ISSN:17426596
K.W. Hor, S.M Salleh, Abdullah, Mohd Ezree, I. Zaman, M.H. Hatta, S. Ahmad, A.E Ismail,W.A.W Mahmud
(2017) Technology Model Of Aquaculture Production System, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 10, 1, ISSN:17426588
N. Hafizah Azis , M. Zulafif Rahim, Nasuha Sa¿ude, N. Rafai, M.S. Yusof, ALM Tobi, ZM Sharif, M. Rasidi Ibrahim, A.E Ismail
(2017) The Influence Of Injection Molding Parameter On Properties Of Thermally Conductive Plastic, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012018-1, ISSN:1757899X
Mohd Tobi A.L., Zaman I., Jamian S., Ismail A.E.
(2016) A Review On Carbon Nanotubes Reinforced Ceramic Composite, ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network , 6, 7406, ISSN:18196608
Ismail A.E., Mohd Tobi A.L.
(2016) Axial Energy Absorption Of Woven Kenaf Fiber Reinforced Composites, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 7, 8672, ISSN:18196608
Ismail A.E.
(2016) Crushing Mechanisms Of Cylindrical Winding Kenaf Fiber Reinforced Composites, JURNAL TEKNOLOGI, Penerbit UTM , 50, ISSN:1279696
A.E Ismail
(2016) Crushing Mechanisms Of Cylindrical Winding Kenaf Fiber Reinforced Composites , JURNAL TEKNOLOGI, Penerbit UTM , 6, 45, ISSN:21803722
A.E Ismail
(2016) Crushing Performances Of Winding Square Kenaf Fiber Reinforced Composites, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING, IJENS , 8, 65, ISSN:2077124X
M. H. Zainulabidin, L. M. Wan, A. E. Ismail, M. Z. Kasron and A. S. M. Kassim
(2016) Effect Of Membrane Surface Tension And Backed-Air Gap Distance On Sound Absorption Characteristics, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN). , 7, 5494, ISSN:18196608
Nur Fadzhila Mahamad Zulkifli, Shafizan Jaibee, Mohd Hafiz Burhan, Fariza Mohamad, Al Emran Ismail, Sia Chee Kiong, Zulkifli Ahmad, Seiji Yokoyama and Nik Hisyamudin Muhd Nor
(2016) Feasibility Study Of Pcb Mobiles Phones And Recycling Through Manual Dismantling And Hydro Metallurgical Method, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN). , 9, 7401, ISSN:18196608
A.E ISMAIL
(2016) Kenaf Fiber Reinforced Composite Tubes As Energy Absorbing Structures, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, IJENS Publisher , 2, 49, ISSN:22272771
Ismail A.E.
(2016) Kenaf Fiber Reinforced Composites Tubes As Energy Absorbing Structures, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, IJENS , 53, ISSN:22272771
Al Emran Ismail
(2016) Mode I Stress Intensity Factors Of Sickle-Shaped Surface Cracks In Round Solid Bars Under Bending Moment, INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, Universiti Malaysia Pahang Publishing , 9, 3329, ISSN:21801606
A.E Ismail
(2016) Mode Iii Stress Intensity Factors Of Sickle-Shaped Surface Cracks In Round Bars, JOURNAL OF MECHANICAL ENGINEERING, Penerbit UiTM , 6, 33, ISSN:18235514
A.E Ismail
(2016) Oblique Crushing Performances Of Kenaf/Aluminum Composite Tubes, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Research India Publications , 5, 5997, ISSN:09734562
A E Ismail, M A Azlan, M L M Tobi and M H Ahmad
(2016) Stress Intensity Factors Of Double Edge Cracks In Large Groove Plates Under Mode I Tension, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 11, 1, ISSN:17578981
A. Hamdan, F. Mustapha, K. A. Ahmad, A. S. Mohd Rafie, M. R. Ishak, A.E Ismail
(2016) The Bonded Macro Fiber Composite (Mfc) And Woven Kenaf Effect Analyses On The Micro Energy Harvester Performance Of Kenaf Plate Using Modal Testing And Taguchi Method, JOURNAL OF VIBROENGINEERING, JVE , 716, ISSN:13928716
A. Hamdan, F. Mustapha, K. A. Ahmad, A. S. Mohd Rafie, M. R. Ishak and A. E. Ismail
(2016) The Effect Of Customized Woven And Stacked Layer Orientation On Tensile And Flexural Properties Of Woven Kenaf Fibre Reinforced Epoxy Composites, INTERNATIONAL JOURNAL OF POLYMER SCIENCE, Hindawi , ISSN:16879422
A.E Ismail
(2015) Eccentric Crushing Behaviour Of High Strength Steel, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, IJENS Publisher , 10, 100, ISSN:22272771
A. L. Mohd Tobi, M. A. Harimon, A. E. Ismail, A. A. Saad, A. A. Azalan
(2015) Investigation On The Fretting Wear Of A Coated Substrate: Interlayer Stress Behaviour, APPLIED MECHANICS AND MATERIALS , TRANS TECH PUBLICATIONS, SWITZERLAND , 1, 311, ISSN:16627482
A.E Ismail
(2015) Lateral Crushing Energy Absorption Of Cylindrical Kenaf Fiber Reinforced Composites, INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH, Research India Publications , 10, 19277, ISSN:09734562
Ismail, A.E., Che Abdul Aziz, M.A.
(2015) Tensile Strength Of Woven Yarn Kenaf Fiber Reinforced Polyester Composites, JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, Penerbit UMP , 12, 1695, ISSN:22894659
Ismail, A.E, Ariffin, A.K., Abdullah, S., Ghazali, M.J., Abdulrazzaq, M., Daud, R.
(2012) Stress Intensity Factors Under Combined Bending And Torsion Moments, JOURNAL OF ZHEJIANG UNIVERSITY: SCIENCE A, Zhejiang University , 1, 1, ISSN:1673565X
Ismail, A.E., Ariffin, A.K., Abdullah, S., Ghazali, M.J.
(2011) Stress Intensity Factors For Surface Cracks In Round Bar Under Single And Combined Loadings, MECCANICA, Springer , 11, 1141, ISSN:00256455
Al Emran Bin Ismail
(2005) Kesan Kekerasan Permukaan Terhadap Permulaan Retak Lesu Keluli Sinter, JURNAL SAINS & TEKNOLOGI, UTHM , 55, ISSN:18232698
Media Digital
Abdulhafid M A Elfaghi, Muhd. Hafeez Zainulabidin, Saifulnizan Bin Jamian, Eliza M.Yusup, Zaleha Mohamad, Kamarul-Azhar Kamarudin, Al Emran Ismail, Sri Yulis M Amin
(2022) Finite Element Method (Mooc), UTHM , ISBN:-
Policy Paper
Al Emran Bin Ismail
(2022) Skop Tugasan Dan Peranan - Jabatan Pengajian Siswazah, Fkmp
Al Emran Bin Ismail
(2021) Polisi Hubungan Masyarakat Universiti Tun Hussein Onn Malaysia (Uthm)
Prosiding / Seminar
N A Nik Ismail, M N Roslan*, A E Ismail and H M El Bakri
(2024) Influence Of Mesh Sizes And Orientations On Expanded Aluminium Sheets On Tensile Performances, AMERICAN INSTITUTE OF PHYSICS (AIP) , 40, ISBN:15517616
Ali Kamil Kareem, Adian H. Al-Mozan, Safaa Abbood Kadhim, Maedah A. Al-Birmani, I.R Ali, A.E Ismail, Ishkrizat Taib
(2023) Design And Manufacture A Dust Sensing Device To Monitor Breathing Air, AIP PUBLISHING , 020021-1, ISBN:15517616
Muhammad Syaaban Zainal Badri, Al Emran Ismail
(2023) Finite Element Analysis Of Rear Underrun Protection Device During, UTHM , 334, ISBN: 27734765
Awgku Azrol Nur Afiq Awgku Aji, Al Emran Ismail
(2023) Investigation Of Crash Impact Toward The Highway Impact Attenuator Structure Using Finite Element Analysis, UTHM , 137, ISBN:27734765
Aiman Hasan, Al Emran Ismail
(2022) Conceptual Design Of Reverse Vending Machine (Rvm): Finite Element Analysis, UTHM , 905, ISBN:27734765
Muhammad Nashriq Mazuki, Al Emran Ismail
(2022) Finite Element Analysis Of Pipeline Upheaval Buckling With Different Initial Imperfections, UTHM , 444, ISBN:27734765
Al Emran Ismail, Aiman Hasan
(2022) Finite Element Analysis Of Pipeline Upheaval Buckling With Different Initial Imperfections , UTHM , 444, ISBN:27734765
Jeffery Jep Brown, Al Emran Ismail, Dave Kidau anak Willie Chiak Mong
(2022) Simulation Study Of Elliptical Thin-Walled Structure Crash Box With Holed Initiator Through Axial Impact , UTHM , 1041, ISBN:27734765
Wan Mohammad Ezudin Bin Faizon, Al Emran Bin Ismail
(2021) Enhancement Of Solar Still Production , UTHM , 72, ISBN:27734765
A Syahmi, M K Awang, A E Ismail, M N Ibrahim
(2021) Interaction Of Surface Crack On Solid Shaft Due To Combined Loading, PENERBIT UTHM , 117, ISBN:27734765
M I H Jamaludin, S Jamian, M K Awang, K A Kamarudin, M K Mohd Noor and A E Ismail
(2020) Characterization Of Continuous Gradient Functionally Graded Natural Fiber Reinforced Polymer Composites, IOP PUBLISHING LTD , 1, ISBN:1757899x
M M Hamdan, M K Awang, A E Ismail
(2020) Double Surface Cracks Interaction On Cylindrical Rod Under Tensile And Torsional Loading, UTHM , 69, ISBN:27734765
Zulfaqih Lazim, Al Emran Ismail, Ishkrizat Taib
(2020) Preliminary Of Finite Element Analysis (Fea) Investigation On The Stent Expansion, IOP PUBLISHER , 1, ISBN:1757899X
Zariq Imran Abdul Manap, Hanani Abd Wahab, Ong Pauline, Al-Emran Ismail, Maznan Ismon, Zaleha Mohamad
(2020) Preliminary Studies On Design Of Photovoltaic Thermal (Pvt) Solar Collector For Roofing System Application. , IOP PUBLISHING LTD , 1, ISBN:1757899X
MA Madlan , Mohd Adzrie , AE Ismail , FM Noor , MH Zainulabidin , NA Azmir , S Hassan , MF Sies , Tamilarasu A/L Maniam
(2020) Sound Insertion Loss Of Kenaf And Arenga Pinnata, IOP PUBLISHER , 1, ISBN:17426596
Al Emran Ismail, Muhammad Fadhil Sahrom, Ahmad Hamdan Ariffin
(2020) The Investigation Of Fibre Orientation Effect In Crashworthiness Of Kenaf And Hybrid Kenaf/Glass Fiber Composite , CENTRE FOR ADVANCED RESEARCH ON ENERGY , 1, ISBN:9789672454366
R. Aliyu, A. M. T. Arifin, R. H. A. Haq, M. F. Hassan, M. N. A. Rahman, A. E. Ismail, M. Z. Rahim, M. R. Ibrahim, M. A. Azlan, M. S. Ahmad, I. Taib & R. Ismail
(2019) An Integration Of Kano Model And Quality Function Deployment Technique - A Case Study Using Sport Earphone, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Mohd Fahrul Hassan, Tillak R Chandra Mohan, Al Emran Ismail, Ishkrizat Taib, Salwa Mahmood, John Mbogo Kafuku
(2019) Application Of Design For Six Sigma (Dfss) In Sustainable Product Design: A Case Study On An Electric Kettle, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
M. F. Mahmod; Elmi Abu Bakar; Raiminor Ramzi; Mohd Azhar Harimon; N. Abdul Latif; Mohammad Sukri Mustapa; Al Emran Ismail
(2019) Artificial Neural Network Application For Damages Classification In Fibreglass Pre-Impregnated Laminated Composites (Fglc) From Ultrasonic Signal, SPRINGER, SINGAPORE , 567, ISBN:9789811364
M F Hassan, K H Mazalan, M N A Rahman, A E Ismail, M R Ibrahim, M Z Rahim and M F Ahmad
(2019) Kano Model And Weighted Rating Evaluation Method For Product Lifecycle Improvement, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Adrian Savari Thomas, Mohd Fahrul Hassan, Al Emran Ismail, Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Md Fauzi Ahmad
(2019) Portable Mini Turntable For Close-Range Photogrammetry: A Preliminary Study, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
M.A. Haikal Ahmad, M. Zulafif Rahim, M. F. Mohd Fauzi, Aslam Abdullah, Z Omar, Songlin Ding, A.E Ismail, and M. Rasidi Ibrahim
(2018) Catalytic Aided Electrical Discharge Machining Of Polycrystalline Diamond - Parameter Analysis Of Finishing Condition, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
A Othman and A E Ismail
(2018) Finite Element Modelling Of Aa6063t52 Thin-Walled Tubes Under Quasi-Static Axial Loading, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899
K Maximus, J Saifulnizan, A Ismail, N Hisyamudin, M N Khir, and A K Kamarul, M K Awang
(2018) Hardness And Wear Rate Of Al Lm6 Hollow Cylinder Fabricated Using Horizontal Centrifugal Casting, IOP PUBLISHER , 1, ISBN:17426588
K Maximus , J Saifulnizan, A Ismail, N Hisyamudin , M N Khir , and A K Kamarul , M K Awang
(2018) Hardness And Wear Rate Of Al Lm6 Hollow Cylinder Fabricated Using Centrifugal Method, IOP SCIENCE , 1, ISBN:17426596
A Othman and A E Ismail
(2018) Quasi-Static Axial Crushes On Woven Jute/Polyester Aa6063t52 Composite Tubes, IOP PUBLICATION , 1, ISBN:1757899X
A Othman and A E Ismail
(2018) The Axial Crushes Behaviour On Foam-Filled Round Jute/Polyester Composite Tubes, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
Lazim Z., Ismail A.E, Taib I., Mohd Atan B.A
(2017) A Review Of Stents Failure On Patent Ductus Arteriosus, Institute of Physics Publishing , 012007, ISBN:17578981
Bainun Akmal Mohd Atan, Al Emran Ismail, Ishkrizat Taib and Zulfaqih Lazim
(2017) A Review On Fracture Prevention Of Stent In Femoropopliteal Artery, Institute of Physics Publishing , 012006, ISBN:17578981
Amin, M. H. M., Arifin, A. M. T., Hassan, M. F., Haq, R. H. A., Rahman, M. N. A., Ismail, A. E., Rahim, M. Z., Ibrahim, M. R., Yunos, M. Z., Ismail, R.
(2017) An Evaluation Of Mechanical Properties On Kenaf Natural Fiber/Polyester Composite Structures As Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426596
MOHD FAHRUL HASSAN, SUHADA JUSOH, MUHAMAD ZAINI YUNOS, A M T ARIFIN, A E ISMAIL, M RASIDI IBRAHIM AND M ZULAFIF RAHIM
(2017) Application Of Design For Six Sigma Methodology On Portable Water Filter That Uses Membrane Filtration System: A Preliminary Study, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Abdullah N., A.E Ismail
(2017) Axial Quasi-Static Crushing Behaviour Of Cylindrical Woven Kenaf Fiber Reinforced Composites, Institute of Physics Publishing , 012004, ISBN:17578981
Kamarul Azhar Kamarudin, Mohamed Nasrul Mohamed Hatta, Noor Wahida Ab Baba, Rosniza Hussin, Al Emran Ismail
(2017) Binder Effect On Seashell Structure, AIP PUBLISHING , 020076, ISBN:9780735415737
A.E Ismail, M.Q Abdul Rahman, M.Z Mohd Ghazali, M. Zulafif Rahim, M. Rasidi Ibrahim, Mohd Fahrul Hassan, Nik Hisyamudin Muhd Nor, A.M.T Ariffin, Muhamad Zaini Yunos
(2017) Combined Mode I Stress Intensity Factors Of Slanted Cracks, INSTITUTE OF PHYSICS PUBLISHING , 012011, ISBN:17578981
Muhammad Sufyan Amir Paisal, Ishkrizat Taib, Al Emran Ismail
(2017) Computational Analysis On Stent Geometries In Carotid Artery: A Review, INSTITUTE OF PHYSICS PUBLISHING , 13, ISBN:17578981
S. Jamian, N.A. Nik Mohamed, A.K.A Mohd Ihsan, A.E Ismail, M.K. Mohd Nor, K.A. Kamarudin, N. H. Muhd Nor
(2017) Deflection Of Elastic Beam With Sma Wires Eccentrically Inserted, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
MOHD FAHRUL HASSAN, MOHD FAIZ AFHAM, AHMAD MUBARAK TAJUL ARIFIN, AL EMRAN ISMAIL, MOHD RASIDI IBRAHIM, MOHAMMAD ZULAFIF RAHIM, MD FAUZI AHMAD
(2017) Design And Development Of A Portable Metal Chip Baler Using A System Design Approach, EDP SCIENCES , 1, ISBN:2261236X
SELAMAT S.N., NIK HISYAMUDIN MUHD NOR, MOHAMAD F., ABD RASHID M.H., ABD RAHIM A.K., ISMAIL A.E., MOHAMMAD ZAIN M.Z., YOKOYAMA S.
(2017) Effect Of Pressure On The Co2 Absorption Into Ladle Furnace Slag, TRANS TECH PUBLICATIONS LTD , 508, ISBN:16629752
Maximus Kohnizio Mahli, Saifulnizan Jamian, Al Emran Ismail, Nik Hisyamudin, Muhd Nor, Mohd Khir Mohd Nor, Kamarul Azhar Kamarudin
(2017) Effect Of Rotating Mold Speed On Microstructure Of Al Lm6 Hollow Cylinder Fabricated Using Centrifugal Method, IOP PUBLISHING , 1, ISBN:17426588
Muhammad Sufyan Amir Paisal, Syed Fadhil Syed Adnan, Ishkrizat Taib, Al Emran Ismail, Mohammad Kamil Abdullah, Normayati Nordin, Suzairin Md Seri, Nofrizalidris Darlis
(2017) Flow Characteristics Near To Stent Strut Configurations On Femoropopliteal Artery, UTHM , 012147, ISBN: 17578981
S.N.A Khalid, A.E Ismail, M.H Zainulabidin
(2017) Impact Strength Of Different Weaving Patterns Of Woven Kenaf Reinforced Polyester Composites, Institute of Physics Publishing , 012011, ISBN:17578981
MOHD NASRULL ABDOL RAHMAN, SYAHRUL AZIANA ABDUL RAHMAN, AL EMRAN ISMAIL AND AZMAHANI SADIKIN
(2017) Inter-Rater Reliability Of The New Observational Method For Assessing An Exposure To Risk Factors Related To Work-Related Musculoskeletal Disorders (Wmsds), MATEC WEB OF CONFERENCES , 1, ISBN:2261236X
A.E Ismail, M.H Zainulabidin, F. Mat Noor, H.A Wahab, M. Ismon, Z. Mohamad and M.A Madlan
(2017) Interactions Of Double Slanted Cracks Under Mode I Loading, MATEC Web of Conferences , 12003, ISBN:2261236X
A.M.T. Arifin, M. Fahrul Hassan, A.E. Ismail, M. Zulafif Rahim, M. Rasidi Ibrahim, R.H. Abdul Haq, M.N.A. Rahman, M.Z. Yunos, M.H.M. Amin
(2017) Investigation On Suitability Of Natural Fibre As Replacement Material For Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
Al Emran Ismail, Mohd Zubir Mohd Ghazali and Nik Hisyamudin Muhd Nor
(2017) Mode I Stress Intensity Factors Of Slanted Cracks In Plates, Institute of Physics Publishing , 012008, ISBN:17578981
N Ma'at, M K Mohd Nor, A E Ismail, K A Kamarudin, S Jamian, M N Ibrahim, M K Awang
(2017) Modelling Dynamic Behaviour And Spall Failure Of Aluminium Alloy Aa7010, IOP Publishing , 1, ISBN:17426588
Mohd Khir Mohd Nor
(2017) Oblique Crushing Performances Of Hybrid Woven Kenaf Fibre Reinforced Aluminium Hollow Cylinder, EDP Sciences , 1, ISBN:2261236X
Al Emran Ismail, Mohd Norihan Ibrahim, Saifulnizan Jamian, Kamarul-Azhar Kamarudin, Muhammad Khairudin Awang, and Mohd Khir Mohd Nor
(2017) Oblique Crushing Performances Of Hybrid Woven Kenaf Fibre Reinforced Aluminium Hollow Cylinder, EDP SCIENCES , 1, ISBN: 2261236X
A.E Ismail, M.N Ibrahim, S. Jamian, K.A Kamarudin, M.K Awang and M.K Mohd Nor
(2017) Oblique Crushing Performances Of Hybrid Woven Kenaf Fibre Reinforced Aluminium Hollow Cylinder , MATEC Web of Conferences , 01006, ISBN:2261236X
Khalid SNA, A.E Ismail, Zainulabidin, M.H.
(2017) Optimization On Impact Strength Of Woven Kenaf Reinforced Polyester Composites Using Taguchi Method, Institute of Physics Publishing , 012010, ISBN:17578981
Kamarul Azhar Kamarudin, Al Emran Ismail
(2017) Periodic Boundary Condition Technique On Carbon Fibre Composites, IOP PUBLISHING , 1, ISBN:17426588
Ismail, A.E., Mohd Tobi, A.L., Siswanto, W.A.
(2017) Preface, Institute of Physics Publishing , 011001, ISBN:17578981
Mohd Fahrul Hassan, M.R.A. Rahman , A.M.T. Arifin, A.E. Ismail, M. Rasidi Ibrahim, M. Zulafif Rahim, Md Fauzi Ahmad
(2017) Preliminary Study On Kano Model In The Conceptual Design Activities For Product Lifecycle Improvement, Institute of Physics Publishing , 1, ISBN:17578981
Tang Tsz Loong, Saifulnizan Jamian, Al Emran Ismail, Nik Hisyammudin Muhd Nur, Yoshimi Watanabe
(2017) Residual Stresses In Shape Memory Alloy Fiber Reinforced Aluminium Matrix Composite, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Siti Norhana Selamat, Nik Hisyamudin Muhd Nor, Muhammad Hanif Abdul Rashid, Mohd Fauzi Ahmad, Fariza Mohamad, Al Emran Ismail, Mohd Fahrul Hassan, Faiz Mohd Turan, Mohd Zamzuri Mohd Zain, Elmi Abu Bakar, Yokoyama Seiji
(2017) Review Of Co2 Reduction Technologies Using Mineral Carbonation Of Iron And Steel Making Slag In Malaysia , IOP PUBLISHING , 012012, ISBN:17426596
A.E Ismail
(2017) Solutions Of Stress Intensity Factors Of Multiple Internal Axial Cracks In Hollow Cylinders, IOP , 012001, ISBN:17578981
Awang M.K., Ismail A.E., Mohd Tobi A.L., Zainulabidin M.H.
(2017) Stress Intensity Factors And Interaction Of Two Parallel Surface Cracks On Cylinder Under Tension, Institute of Physics Publishing , 012009 , ISBN:1757-8981
Al Emran Ismail, Kamarul Azhar Kamarudin, Nik Hisyamudin Muhd Nor
(2017) Stress Intensity Factors Of Slanted Cracks In Bi-Material Plates, INSTITUTE OF PHYSICS PUBLISHING , 012043, ISBN:17426588
Mohd Tobi A.L., Ismail A.E.
(2016) Development In Geared Turbofan Aeroengine, IOP , - , ISBN:17578981
A.E Ismail
(2016) Effect Of Hybridized Fiber Wrapped Around The Aluminum Tubes On The Crushing Performances, IOP Publishing , 012019 , ISBN:1757-899X
AE Ismail, SH Masran, S Jamian, KA Kamarudin, MK Mohd Nor, NH Muhd Nor, AL Mohd Tobi and MK Awang
(2016) Fracture Toughness Of Woven Kenaf Fibre Reinforced Composites, IOP Publishing , 0120020 , ISBN:1757-899X
M K Mohd Nor, N Ma'at, K A Kamarudin, A E Ismail
(2016) Implementation Of Finite Strain-Based Constitutive Formulation In Lllnl-Dyna3d To Predict Shockwave Propagation In Commercial Aluminum Alloys Aa7010, IOP Publishing Ltd , 1 , ISBN:17578981
A.E Ismail
(2015) Fatigue Strength Of Woven Kenaf Fiber Reinforced Composites, IOP Publishing , ISBN:1757899X
Norjariah Ariff, Azlina Md. Yassin, Haidaliza Masram
(2015) Motivation Towards Homestay Entrepreneurs: Case Study In The State Of Johor., RISM , -, ISBN:-
A. E. Ismail, A. L. M. Tobi and N. H. M. Nor
(2015) Stress Intensity Factors Of Slanted Cracks In Round Bars Subjected To Mode I Tension Loading, AIP publisher , - , ISBN:978-0-7354-1304
A.E Ismail, M.H Zainulabidin, Roslan, M.N, A.L Mohd Tobi and N.H.M Nor
(2014) Effect Of Velocity On The Impact Resistance Of Woven Jute Fiber Reinforced Composites, TRANS TECH PUBLICATIONS LTD. , 1277, ISBN:9783037859339
A. E. Ismail and M. A. Hassan
(2014) Low Velocity Impact On Woven Kenaf Fiber Reinforced Composites, TRANS TECH , 503, ISBN:9783038352327
M.N ROSLAN, A.E ISMAIL, M.Y HASHIM, M.H ZAINULABIDIN, S.N.A. KHALID
(2014) Modelling Analysis On Mechanical Damage Of Kenaf Reinforced Composite Plates Under Oblique Impact Loadings, TRANS TECH PUBLICATIONS LTD. , 1324, ISBN:9783037859339
K.A.Kamarudin
(2014) Modelling High Velocity Impact On Aluminium Alloy 7075-T6 Under Axial Pretension, Trans Tech Punlications Ltd , ISBN:978-303835232-7
Al Emran Bin Ismail
(2012) Developing Innovative Tools For Delivering Highquality Of Engineering Education: Means To Enhance Stident'S Quality, UTEM
Al Emran Bin Ismail
(2012) Finite Element Simulation And Modeling Of Axial Dynamics Energy Absorption On Conical Titanium Alloy, UiTM
Al Emran Bin Ismail
(2012) Non-Linear Numerical Simulation Of Dynamic Energy Absorption On Unfilled And Foam-Filled Cotton Fibre/Polypylene Corrugated Of Tubular Structure, UiTM
Al Emran Bin Ismail
(2012) Probabilistic Analysis Of Surface Crack In Round Bars Under Bending Moments, IEEE
Al Emran Bin Ismail
(2012) Probabilistic Analysis Of Surface Cracks In Round Bars Under Tension Loading, -
Al Emran Bin Ismail
(2011) Computation Of Stress Intensity Factor For Multiple Cracks Using Singular Finite Element, IACSIT
A.E. Ismail, A.K. Ariffin, S. Abdullah, M.J. Ghazali and R. Daud
(2011) Elastic-Plastic Analysis Of Surface Crack In Round Bars Under Torsion, TRANS TECH , 651, ISBN:9780878492107
Al Emran Bin Ismail
(2011) Elastic-Plastic Analysis Of Surface Cracks In Round Bars Under Bending Moments, UKM
Al Emran Bin Ismail
(2011) Elastic-Plastic Analysis Of Surface Cracks In Round Bars Under Tension Stress, UM
Al Emran Bin Ismail
(2011) J-Integral Analysis Of Surface Cracks In Round Bars Under Bending Moment, iiec-association
Al Emran Bin Ismail
(2011) J-Integral Analysis Of Surface Cracks In Round Bars Under Tension Loadings, iiec-association
Al Emran Bin Ismail
(2011) J-Integral Evaluation In Two Dimensional Interacting Cracks, IACSIT
Al Emran Bin Ismail
(2011) Mode Iii Stress Intensity Factor Of Surface Crack In Round Bars, IACSIT
Al Emran Bin Ismail
(2010) Analisis Kamiran-J Pada Bar Yang Mengandungi Retak Permukaan Kenaan Momen Lentur, UKM
Al Emran Bin Ismail
(2010) Elastic-Plastic Analysis Of Surface Crack In Round Bars Under Torsion Loading, FEOFS
Al Emran Bin Ismail
(2010) Probabilistic Analysis Of The Human Lumbar Spine Associated Finite Element Model, UKM
Al Emran Bin Ismail
(2010) The Effect Of Tempering Temperatures To Crack Nucleation In Sintered Steel Under Biaxial Cyclic Loading, Elsevier
Al Emran Bin Ismail
(2009) Application Of High Cycle Multiaxial Fatigue Criteria In Probabilistic Analysis
Al Emran Bin Ismail
(2009) Crushing Characteristic Of Foam-Filled Columns, Faculty of. Engineering Malahayati University
Al Emran Bin Ismail
(2009) Optimization Of The Simple Plate Using High Cycle Multiaxial Fatique Criteria
Al Emran Bin Ismail
(2009) Probabilistic Assessments Of The Plate Using Monte Carlo Simulation, UPM
Al Emran Bin Ismail
(2008) Crushing Behavior Of Foam-Filled Columns
Al Emran Bin Ismail
(2008) Crushing Behavior Of Foam-Filled Steel Extrusions
Al Emran Bin Ismail
(2008) Crushing Behavior Of Rigid Polymeric Foam-Filled Steel Under Quasi-Static Compressive Loading
Al Emran Bin Ismail
(2008) Effect Of Temperature On Tensile Behavior Of Hybrid Extruded Glass/Natural Fiber Reinforced Polyester Comp
Al Emran Bin Ismail
(2008) Quasi-Static Energy Absorption Capabilities Of Foam-Filled Steel Extrusion Tubes
Al Emran Bin Ismail
(2008) Sound Generated During The Compaction Of Alumina Reinforced Aluminum Powders
Al Emran Bin Ismail
(2008) Tensile And Impact Behavior Of Hybrid Extruded Glass/Natural Fibers Reinforced Polyester Composites
Al Emran Bin Ismail
(2007) Dynamic Characteristics Of Natural Fiber Reinforced Composites
Al Emran Bin Ismail
(2007) Acoustic Activities Of Powder Compaction Of Alumina Reinforced Aluminium Alloy Using Different Mould Surface Roughnesses
Al Emran Bin Ismail
(2007) Crashworthiness Behavior Of Axially Crushed Steel Extrusion Filled With Polymeric Foam
Al Emran Bin Ismail
(2007) Crushing Behavior Of Foam-Filled Steel Extrusions Subjected To Axial Quasi-Static Compressive Loadings
Al Emran Bin Ismail
(2007) Dynamic Energy Absorption Of Conical Filament Wound Composites
Al Emran Bin Ismail
(2007) Effect Of Surface Roughness On The Powder Compaction Behavior Of Alumina Reinforced Aluminum Alloy
Al Emran Bin Ismail
(2007) Fatigue Behavior Of Stirred Sic Reinforced Lm6 Aluminum Composites: Effect Of Blade Angle And Stirring Speeds
Al Emran Bin Ismail
(2007) Fracture Mechanisms Of Natural Fibre Reinforce Composite At High Temperatures
Al Emran Bin Ismail
(2007) High Temperature Tensile Properteis Of Natural Fibre Reinforced Composites
Al Emran Bin Ismail
(2007) Low Velocity Impact Energy Absorption Of Conical Filament Winding Composites
Al Emran Bin Ismail
(2007) Tensile Behavior Of Hybrid Natural/Glass Fibers Reinforced Composites At Different Temperatures
Al Emran Bin Ismail
(2007) Tensile Properteis Of Stirred Sic Reinforced Lm25 Aluminum Alloy
Al Emran Bin Ismail
(2007) Tensile Properties Of Hybrid Extruded Glass/ Natural Fibers Reinforced Polypropylene Composites At High Temperatures
Al Emran Bin Ismail
(2007) Tensile Properties Of Hybrid Extruded Glass/Natural Fibers Reinforced Polypropylene Composites At High Temperature
Al Emran Bin Ismail
(2007) Water Absorption Effect On The Tensile Behavior Of Coir Fiber Reinforced Composite
Al Emran Bin Ismail
(2006) Cyclic Behaviour Of Heat-Treated Sintered Steel Treated Under Different Tempering Temperatures
Al Emran Bin Ismail
(2006) Effect Of Aging Treatment On Tensile Properteis Of Natural Fibre Reinforced Polyester Composites
Al Emran Bin Ismail
(2006) Effect Of Flexural Strength Of 10% Sic Reinforced Lm6 Aluminum Composite Using Different Blade Angle And Stirring Speed
Al Emran Bin Ismail
(2006) Electrical Discharge Machining Of Aluminum Alloy And Aluminum Mmc Using Taguchi Method
Al Emran Bin Ismail
(2006) Enegy Absorption Of Pultruded Tubes Containing Different Chamfering Angles
Al Emran Bin Ismail
(2006) Energy Absorption Performance Of Conical Natural Fibre Reinforced Composites
Al Emran Bin Ismail
(2006) Experimental Investigation Of Energy Absorption Performance Of Corrugated Tubes Under Quasi-Static Loading
Al Emran Bin Ismail
(2006) Mechanical Deformation Of Hybrid Natural/Glass Fibre Reinforced Composites
Al Emran Bin Ismail
(2006) Powder Compaction Of Sic Reinforced Composite
Al Emran Bin Ismail
(2006) Powder Compaction Studies On Alumina Reinforced Aluminum Alloy Using Non-Destructuve Technique
Al Emran Bin Ismail
(2006) Quasi-Static Energy Absorption Performance Of Conical Natural/Glass Fibre Composites
Al Emran Bin Ismail
(2006) Sem Observation Of Fatigue Crack Nucleation Mechanisms In Sintered Steel
Al Emran Bin Ismail
(2006) Tensile Properteis Of Aged Natural Fibre Reinforced Polyester Composites
Al Emran Bin Ismail
(2006) Tensile Property Of Silane Treated Natural Fibre Reinforced Composite
Al Emran Bin Ismail
(2006) The Effect Of Buckling Towards The Strength Of Frp Pultruded Composite Column
Al Emran Bin Ismail
(2006) Toughening Mechanisms Observation Of Treated Natural Fibre Reinforced Composite Under Tensile And Impact Loadings
Al Emran Bin Ismail
(2005) Effect Of Empty Fruit Bunch (Efb) Fibre Reinforced Low Density Polyethylene Epoxy (Ldpe) Composites On Mechanical Properteis
Al Emran Bin Ismail
(2005) Fatigue Crack Nucleation In Sintered Steel
Al Emran Bin Ismail
(2005) Impact Behavior Of Oil-Palm Finre Reinforced Composites
Al Emran Bin Ismail
(2005) Investigation On Penetration Resistance Of Meshless 7075-T651 Aluminum Alloy: Simulation Prediction Approach
Al Emran Bin Ismail
(2005) Utilizing Natural Fibre As Reinforcing Tool In Polymeric Composite For Structural Material: Effect Of Aging Treatments
Al Emran Bin Ismail
(2003) Fatigue Behavior Of Sintered Steel Under Different Tempering Temperatures
Al Emran Bin Ismail
(2002) Fatigue Crack Nucleation In High Toughness Sintered Steel

ID/CODEPROJECTCLIENTSTART DATEEND DATE
PS274 Finite Element Analysis Of Structural Integrity Asiaflex Products Sdn Bhd 22/07/2020 31/08/2020
PS078 CONSULTATION SERVICE FOR FINITE ELEMENT ANALYSIS (FEA) FOR HEAT EXCHANGER HM CRYOGENICS SDN. BHD. 13/01/2018 27/01/2018
PS168 Consultation Service For Finite Element Analysis (FEA) For Heat Exchanger - Phase 2 HM Cryogenics Sdn. Bhd. 13/01/2018 27/01/2018
P071 YJACK VALIDATION TEST YJACK TECHNOLOGY SDN BHD 19/05/2016 18/07/2016

YearDescriptionLevel
2024Assessor / Reviewer for Penilai Jurnal Untuk ASEAN Engineering Journal, UTM, Malaysia, July 2024 International
2024External Assessor / External Reviewer for Pemeriksa Luar Pelajar PhD - Noor Alia Md Zain, UNIMAP, Malaysia, February 2024 National
2024Assessor / Reviewer for Reviewer for the Journal of Thin-Walled Structures, Elsevier, Netherlands, February 2024 International
2024 - 2030 Assessor / Reviewer for Perlantikan Panel EAC 2024-2030, Lembaga Jurutera Malaysia, Malaysia, January 2024 National
2024 - 2026 Assessor / Reviewer for PANEL PAKAR PROJEK DANA PENYELIDIKAN DAN PEMBANGUNAN (R&D) KEMENTERIAN SAINS, TEKNOLOGI DAN INOVASI (MOSTI), MOSTI, Malaysia, January 2024 National
2024Assessor / Reviewer for Reviewer of Manuscript ID JEFF-23-0224 for Journal of Engineered Fibers and Fabrics, Journal of Engineered Fibers and Fabrics., Belgium, January 2024 International
2024Committee Member for AHLI JAWATANKUASA PELAKSANA KURSUS PEMBANGUNAN STAF FKMP - SIRI 2 2024: TEKNIK MUDAH BINA WEBSITE PROFESSIONAL DENGAN GOOGLE SITES ANJURAN KELAB REKREASI DAN KEBAJIKAN STAF FKMP (MECHCLUB) FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN (FKMP), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2024 University
2024Head for Audit Akreditasi Sementara Program Sarjana Kelestarian dan Sains Sekitaran (MMJJ) di Malaysia-Japan International Institute of Technology (MJIIT), UTM , Pusat Akreditasi UTM (UTM ACe), Malaysia, September2024 National
2023Assessor / Reviewer for Penilai bagi Jurnal: Engineering Science and Technology, an International Journal., Elsevier, Netherlands, January 2023 International
2023Committee Member for AJK Editorial dan Pembentangan MUCET 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 University
2023 - 2024 Industrial Adviser for Lantikan Perunding Bagi New Star Food Industries Sdn Bhd, Sri Gading, Batu Pahat., New Star Food Industries Sdn Bhd, Malaysia, July 2023 State
2023External Examiner for PEPERIKSAAN LISAN (VIVA), PELAJAR DOKTOR FALSAFAH , FKM, UTM JB - MAZLAN AHMAD MANSOR (PKM153010), UTM, Malaysia, July 2023 University
2023 - 2024 Industrial Adviser for Perlantikan Sebagai Perunding Teknikal, New Star Food Industries Sdn Bhd, Malaysia, July 2023 State
2023 - 2024 Academic Editor / Editor for Kedua Editor Jurnal IJIE, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023 International
2023 - 2024 Assessor / Reviewer for PENILAI MAJLIS AKREDITASI TEKNOLOGI DAN TEKNIKAL (TTAC) LEMBAGA TEKNOLOGIS MALAYSIA (MBOT), LEMBAGA TEKNOLOGIS MALAYSIA (MBOT), Malaysia, January 2023 National
2021Industrial Adviser, BRILLANT INSPIRE SOLUTIONS, Malaysia, March 2021 State

YearDescription
2024 Assessor / Reviewer for PENILAI UNTUK MAJLIS AKREDITASI KEJURUTERAAN (EAC), LEMBAGA JURUTERA MALAYSIA, Malaysia, January 2024
2024 Assessor / Reviewer for Panel Penilai Pre-viva Bagi Program PhD (PNT) FTK UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2024
2024 Committee Member for Program KTP: Ergonomic Best Practices at School FKMP Siri 2 SMK Tun Ismail, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2024
2024 Committee Member for Program KTP: Ergonomic Best Practices at School. Siri 1: SMK Seri Gading, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2024
2024 Examiner for Mohd Nuriman Bin Mohd Ridzuan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Muhammad Furqan Bin Mohd Desa, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Muhammad Furqan Bin Mohd Desa, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Nur Rani Binti Hasni, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Nur Rani Binti Hasni, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Nurul Nabilah Binti Muhammad Amiruddin @ Asun, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Nurul Najwa Binti Khairi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Nurul Natasya Najwa Binti Nasri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Pavin Pillai A/L Sathasivam Pillai, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Sulaiman Bin Abdul Salam, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024
2024 Examiner for Sulaiman Bin Abdul Salam, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Instructor/lecturer for Pensyarah Kursus MDM11303, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2024
2024 Main Supervisor for Akbar Bin Othman, PhD, Universiti Tun Hussein Onn Malaysia, 2024
2024 Supervisor for Kelvin Ling Ting Feng, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024
2024 Supervisor for Kelvin Ling Ting Feng, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Supervisor for Mohamad Hisyamuddin Bin Omar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Supervisor for Mohammad Amir Luqman Bin Zainal, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2024 Supervisor for Penyelia PSM Sem 2 2023-2024, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2024
2024 Supervisor for Seri Melati Izzati Binti Mohd Yusoff, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024
2023 Examiner for Adi Aiman Bin Md Nor, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Adrian Chong Hengiap, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Ahmad Nazarul Afwan Bin Imran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Amirul Yazid Bin Syafie, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Amirul Yazid Bin Syafie, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Ganahcan Nair A/L R Sivakumar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Ganahcan Nair A/L R Sivakumar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Khairul Arifmuhaimin Bin Arifin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Khairul Arifmuhaimin Bin Arifin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Muhammad Amirul Danial Bin Ganesh, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Muhammad Ashraaf Bin Abdul Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Muhammad Asyraaf Bin Halim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Nurul Nabilah Binti Muhammad Amiruddin @ Asun, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Nurul Najwa Binti Khairi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Nurul Natasya Najwa Binti Nasri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Pavin Pillai A/L Sathasivam Pillai, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Examiner for Pemeriksa Dalam Sesi Viva Pelajar., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2023
2023 Examiner for Siti Nur Aqila Syakira Binti Md Azizan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 External Examiner for PEMERIKSAAN TESIS DAN PEPERIKSAAN LISAN, PELAJAR PHD, FAKULTI KEJURUTERAAN MEKANIKAL, UTM JB - MAZLAN BIN AHMAD MANSOR (PKM153010), UTM, Malaysia, July 2023
2023 External Examiner for SESI VIVA VOCE CALON PELAJAR DOKTOR FALSAFAH (KEJURUTERAAN MEKANIKAL) - HENG SOO HAU, UNIMAP, Malaysia, February 2023
2023 Industrial Training Supervisor for Aleeza Fatiha Binti Abdullah, Vtech Communications (M) Sdn Bhd, 2023
2023 Industrial Training Supervisor for Arif Hakimi Bin Norzaki, Rbsz Enterprise, 2023
2023 Industrial Training Supervisor for Mohamad Aiman Hakim Bin Masuri, Nadi Senang Entreprise, 2023
2023 Industrial Training Supervisor for Mohamad Azman Bin Sungep, Urc Snack Foods (Malaysia) Sdn. Bhd, 2023
2023 Industrial Training Supervisor for Mohamad Izwan Bin Sabtu, Tunglip Precision Industry Sdn Bhd, 2023
2023 Industrial Training Supervisor for Mohamad Taufiq Hidayat Bin Jailani, Vtech Communications (M) Sdn Bhd, 2023
2023 Industrial Training Supervisor for Muhammad Ariff Nazrin Bin Mohd Kamarulnizam, St Microelectronic Sdn Bhd, 2023
2023 Industrial Training Supervisor for Muhammad Faiez Bin Zamridin, Abadi Aircond, 2023
2023 Industrial Training Supervisor for Muhammad Farid Bin Mohd Ghazali, Ranhill Saj Sdn Bhd, 2023
2023 Industrial Training Supervisor for Muhammad Izzat Amir Bin Musa, Majlis Perbandaran Batu Pahat, 2023
2023 Industrial Training Supervisor for Nur Azian Binti Norazizi, Vtech Communications (M) Sdn Bhd, 2023
2023 Industrial Training Supervisor for Nurul Ain Shuhada Binti Othman, Urc Snack Foods (Malaysia) Sdn. Bhd, 2023
2023 Industrial Training Supervisor for Nurul Nazihah Binti Jamil, Lian Huat Bakery Machinery Sdn Bhd, 2023
2023 Industrial Training Supervisor for Pour Jia Qing, Perunding Tag, 2023
2023 Industrial Training Supervisor for Puvanithan A/L Raguraman, Tnb Batu Pahat, 2023
2023 Industrial Training Supervisor for Seri Melati Izzati Binti Mohd Yusoff, Tacam Manufacturing Plants, 2023
2023 Industrial Training Supervisor for Siti Nur Aishah Binti Mohamad Jun, Z & Z Electrical, 2023
2023 Main Supervisor for Md. Mominur Rahman, PhD, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Awgku Azrol Nur Afiq Bin Awgku Aji, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Izzatul Alia Binti Mazlan, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Khairun Nisa Mahfuzah Binti Haidir, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Khairun Nisa Mahfuzah Binti Haidir, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Mohamad Hisyamuddin Bin Omar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Mohammad Amir Luqman Bin Zainal, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Muhammad Haniffudin Bin Mohd Rozali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Muhammad Suhairi Bin As'Ari, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Muhammad Syaaban Bin Zainal Badri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023
2023 Supervisor for Seri Melati Izzati Binti Mohd Yusoff, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023
2022 Examiner for Adi Aiman Bin Md Nor, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Adrian Chong Hengiap, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Ahmad Nazarul Afwan Bin Imran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Mohd Idham Bin Haris, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Mohd Safwan Bin Mohamad Ali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Muhammad Alif Aiman Bin Mohd Zakaria, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Muhammad Ashraaf Bin Abdul Razak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Muhammad Asyraaf Bin Halim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Siti Nur Aqila Syakira Binti Md Azizan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Industrial Training Supervisor for Amirul Hilman Bin Abd Wahid, Matech Engineering &Amp; Construction Sdn Bhd, 2022
2022 Industrial Training Supervisor for Arvind Naidu A/L Beng Tissen, Asia Aeronautical Training Academy Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Goh Bing Shin, Vs Industry Berhad, 2022
2022 Industrial Training Supervisor for Gursharanjit Singh A/L Krishan Singh, Weidmuller (Malaysia) Sdn Bhd, 2022
2022 Industrial Training Supervisor for Kuhan A/L Radakrishnan, Ges Manufacturing Services (M) Sdn Bhd, 2022
2022 Industrial Training Supervisor for Lizawati Binti Salleh, Dyson Manufacturing Sdn Bhd, 2022
2022 Industrial Training Supervisor for Mohamad Farhan Bin Mohd Khir, Vs Industry Berhad, 2022
2022 Industrial Training Supervisor for Mohammad Hafiz Bin Norazwan, Celestica (M) Sdn. Bhd. , 2022
2022 Industrial Training Supervisor for Muhammad Amirul Harith Bin Abdul Hadi, Mh Auto Fast, 2022
2022 Industrial Training Supervisor for Muhammad Saufi Iman Bin Md Basrah, Fuji Smbe Manufacturing Sdn Bhd, 2022
2022 Industrial Training Supervisor for Muhammad Shahrul Izuddin Bin Che Ros, Vs Industry Berhad, 2022
2022 Industrial Training Supervisor for Muhammad Zahirulhaq Bin Ahmad, Skp Bm Electronics Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nazarrul Fahmi Bin Abdul Rahim, Fuji Smbe Manufacturing Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nur Khuzaimah Binti Mat Dah, Celestica Electronic (M) Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nurul Amirah Binti Norizam, Ornapaper Industry (Johor) Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Nurul Natasya Binti Idirs, Celestica Electronic (M) Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nurul Shahadah Binti Roslan, Helmsion Engineering Sdn Bhd, 2022
2022 Industrial Training Supervisor for Sheril Nadya Rosarjuna Binti Abdullah, Easteel Services (Malaysia) Sdn Bhd, 2022
2022 Main Supervisor for Muhammad Faizal Bin Johan, MSc, Universiti Tun Hussein Onn Malaysia, 2022
2022 Main Supervisor for Wan Fauzi Yusni Ahmad, PhD, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Awgku Azrol Nur Afiq Bin Awgku Aji, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Izzatul Alia Binti Mazlan, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Luqman Hakim Bin Zulkifli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Mohammad Amir Luqman Bin Zainal, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Mohammad Amir Luqman Bin Zainal, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Muhammad Haniffudin Bin Mohd Rozali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Muhammad Suhairi Bin As'Ari, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Muhammad Syaaban Bin Zainal Badri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Naveenthiran Nair A/L Murali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Saravanan A/L Elangkumaran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2021 Assessor / Reviewer for PANEL PAKAR PENILAIAN JAWATANKUASA PENILAIAN DANA (JPD) PERMOHONAN TECHNOLOGY DEVELOPMENT FUND 1 (TED 1), MOSTI, Malaysia, January 2021
2021 Examiner for Liyana Syahirah Binti Ramlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mior Muhammad Imran Bin Mior Mohd Sharifuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mohamad Firdaus Bin Supardi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mohamad Khairul Ikhwan Bin Abdul Razak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mohamad Khairul Ikhwan Bin Abdul Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mohamed Fakhruzzaman Bin Mohamed Firdaus, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mohamed Fakhruzzaman Bin Mohamed Firdaus, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Azhan Fikri Bin Abd Aziz, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Fadhli Bin Zahrin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Najmi Bin Che Ariffin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Nuruddin Bin Ariffin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Puteri Zakiah Hanum Binti Mesri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Scollastica Jane Anak Lumpong, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Wan Mohamad Abid Bin Wan Kamal, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Aiman Bin Hasan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Aiman Bin Hasan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Luqman Hakim Bin Zulkifli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhammad Hilman Bin Karem, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhammad Nashriq Bin Mazuki, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Naveenthiran Nair A/L Murali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Saravanan A/L Elangkumaran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Syed Abdul Afiq Bin Wan Sakawi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2020 Co-supervisor for Nik Ainun Binti Nik Ismail, PhD, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Ahmad Syahmi Bin Azri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Ahmad Syahmi Bin Azri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Logeswaran A/L Govindarajan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Logeswaran A/L Govindarajan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Luqmanul Hakim Bin Mohd Hazman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Mohamad Siddiqin Bin Mohd Mazlan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Azhan Fikri Bin Abd Aziz, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Fadhli Bin Zahrin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Lutfilhadi Bin Issek, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Muizzuddin Bin Hamdan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Najmi Bin Che Ariffin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Puteri Zakiah Hanum Binti Mesri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Scollastica Jane Anak Lumpong, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Main Supervisor for Zainun, PhD, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Dave Kidau Anak Willie Chiak Mong, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Duane Jo Gabriel Among, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Gordon Gimpas, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Hilman Bin Karem, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Nashriq Bin Mazuki, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Syed Abdul Afiq Bin Wan Sakawi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Wan Mohammad Ezudin Bin Faizon, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Wan Mohammad Ezudin Bin Faizon, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2019 Examiner for Adli Sufiyan Bin Jamil, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Harith Razzien Bin Roslan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Luqmanul Hakim Bin Mohd Hazman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Mohamad Hafiz Bin Yaakub, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Mohamad Siddiqin Bin Mohd Mazlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Mohamad Thaqif Bin Mohamad Ludin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Mohd Izzuddin Hafiz Bin Jamaludin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhamad Faiz Bin Mohd Zin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhammad Lutfilhadi Bin Issek, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhammad Muizzuddin Bin Hamdan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhd Aiman Safwan Bin Said, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nabila Binti Rahmat, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nurul Hayati Binti Ismail, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nurul Hayati Binti Ismail, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Main Supervisor for Jeffery Jep Anak Brown, MSc, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Dave Kidau Anak Willie Chiak Mong, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Duane Jo Gabriel Among, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Gordon Gimpas, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Jeffery Jep Anak Brown, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Justin Anak Empaling, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Mohammad Amir Luqman Bin Zainal, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Muhammad Imran Bin Ilias, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Muhammad Imran Bin Ilias, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Muhammad Syafiq Bin Abdul Rahman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2018 Examiner for Adip Kamel Bin Abdul Ghani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Adip Kamel Bin Abdul Ghani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Adli Sufiyan Bin Jamil, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Adli Sufiyan Bin Jamil, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohamad Hafiz Bin Yaakub, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohamad Thaqif Bin Mohamad Ludin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohd Izzuddin Hafiz Bin Jamaludin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhamad Faiz Bin Mohd Zin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Akmal Bin Fadzli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Al-Amin Bin Md Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Hazwan Hariz Bin A.Hamid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Khairol Bin Azahar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Nur Naim Bin Zamri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Razzie Bin Jabri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhd Aiman Safwan Bin Said, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Main Supervisor for Abdul Fattah Bin Mat Beyi, MSc, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Abdul Fattah Bin Mat Beyi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Jeffery Jep Anak Brown, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Justin Anak Empaling, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Mohamad Azaruddin Bin Mohd Zain, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Mohd Syukri Bin Amri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Mohd Syukri Bin Amri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Muhammad Amin Khudri Bin Azlan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Muhammad Syafiq Bin Abdul Rahman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Puteri Nur Amalina Binti Megat Taftazani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2017 Co-supervisor for Muhammad Muzzammil Bin Shahabudin, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Ahmad Tajularriffin Bin Maarof, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Alaric Sim Kwang Yu, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Anuar Bin Ibrahim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Akmal Bin Fadzli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Al-Amin Bin Md Razak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Aminshafie Bin Noordin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Faisal Bin Abdul Rahman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Haziq Firdaus Bin Mhd Arifin @ Mhd Ariffin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Hazwan Hariz Bin A.Hamid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Khairol Bin Azahar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Nurhaffiz Bin Idris, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Razzie Bin Jabri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Shukri Bin Zainal, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Syafiq Bin Mohd Rani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nor Intan Suraya Binti Abdullah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Main Supervisor for Ali Kamil Kareem, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Main Supervisor for Omar Mohammed Fakhri, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Main Supervisor for Sabah Salim Hamza, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Main Supervisor for Tuan Mohd Hafeez Bin Tuan Ibrahim, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Abdul Fattah Bin Mat Beyi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Mohamad Azaruddin Bin Mohd Zain, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Muhammad Amin Khudri Bin Azlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Muhammad Eka Novianta, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Muhammad Hilmi Bin Abu Bakar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Noramirah Binti Che Lah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Noramirah Binti Che Lah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Nur Alhudha Binti Hashim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Nur Asmah Laili Binti Mat Naim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Puteri Nur Amalina Binti Megat Taftazani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2016 Co-supervisor for Muhammad Sufyan Amir Bin Paisal, MSc, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Alaric Sim Kwang Yu, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Anuar Bin Ibrahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Muhammad Haziq Firdaus Bin Mhd Arifin @ Mhd Ariffin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Muhammad Syafiq Bin Mohd Rani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Nor Intan Suraya Binti Abdullah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Oon Vincent, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Main Supervisor for Akbar Bin Othman, PhD, Universiti Tun Hussein Onn Malaysia, 2016
2016 Main Supervisor for Bainun Akmal Binti Mohd Atan, PhD, Universiti Tun Hussein Onn Malaysia, 2016
2016 Main Supervisor for Zulfaqih Bin Lazim, PhD, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Muhammad Eka Novianta, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Muhammad Hilmi Bin Abu Bakar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Nur Asmah Laili Binti Mat Naim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Nurul Iliyana Binti Shaarin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Nurul Iliyana Binti Shaarin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Siti Nor Assura Binti Kamarudzaman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Siti Nor Assura Binti Kamarudzaman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2015 Main Supervisor for Muhammad Fadhil Bin Sahrom, MSc, Universiti Tun Hussein Onn Malaysia, 2015
2014 Main Supervisor for Mohd Aiman Bin Hassan, MSc, Universiti Tun Hussein Onn Malaysia, 2014
2014 Main Supervisor for Muhammad Syiddiq Bin Abdullah, MSc, Universiti Tun Hussein Onn Malaysia, 2014
2014 Main Supervisor for Noorhaslinda Binti Haji Abdullah, MSc, Universiti Tun Hussein Onn Malaysia, 2014
2013 Main Supervisor for Mohd Aswadi Bin Che Abdul Aziz, MSc, Universiti Tun Hussein Onn Malaysia, 2013
2013 Main Supervisor for Mohd Azizan Bin Ismail, MSc, Universiti Tun Hussein Onn Malaysia, 2013
2013 Main Supervisor for Mohd Syahir Bin Ramlee, MSc, Universiti Tun Hussein Onn Malaysia, 2013
2013 Main Supervisor for Norhafizan Bin Nezere, MSc, Universiti Tun Hussein Onn Malaysia, 2013
2013 Main Supervisor for Siti Nor Azila Binti Khalid, PhD, Universiti Tun Hussein Onn Malaysia, 2013
2012 Main Supervisor for Muhamad Khairudin Bin Awang, PhD, Universiti Tun Hussein Onn Malaysia, 2012
2012 Main Supervisor for Nik Ainun Binti Nik Ismail, MSc, Universiti Tun Hussein Onn Malaysia, 2012
2012 Main Supervisor for Tuan Mohd Hafeez Bin Tuan Ibrahim, MSc, Universiti Tun Hussein Onn Malaysia, 2012
2010 Main Supervisor for Mohd Nazrul Bin Roslan, MSc, Universiti Tun Hussein Onn Malaysia, 2010
2009 Main Supervisor for Agung Setyo Darmawan, PhD, Universiti Tun Hussein Onn Malaysia, 2009

YearDescriptionLevel
2024Deputy Director, Program Related Center (PSH) for Program Pemindahan Ilmu "Knowledge Transfer Programme (KTP): Ergonomics Best Practices at School"., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, April 2024, April - August 2024 University
2024Committee Member for Kursus Pembangunan Staf FKMP Siri 1 2024: Pengurusan Kendiri Dokumentasi LHDN., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2024, February - March 2024 University
2024Committee Member for PELANTIKAN SEBAGAI AHLI JAWATANKUASA PELAKSANA KURSUS PEMBANGUNAN STAF FKMP - SIRI 2 2024: TEKNIK MUDAH BINA WEBSITE PROFESSIONAL DENGAN GOOGLE SITES, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2024, July - August 2024 University
2024Member for Panel Penilai PSM 1 dan 22023/2024., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2024, January 2024 University
2024Assessor / Reviewer for Mechanics Based Design of Structures and Machines, An International Journal., Taylor & Francis, United Kingdom, July 2024, July 2024 International
2024 for KERJASAMA DAN BANTUAN TEKNIKAL UNTUK PERTANDINGAN INOVASI PELAJAR SEKOLAH KEBANGSAAN PINTAS RAYA, SK PINTAS RAYA, Malaysia, May 2024, May - December 2024 State
2024Member for Panel Penilai Moderasi PSM Sem 1 2023/2024., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2024, February 2024 University
2023 - 2036 Trainer for Sijil Train-The-Trainer (TTT), HRDF, Malaysia, July 2023, July 2023 - December 2036 National
2022 - 2024 Committee Member for Ahli MOU UTHM dengan Universitas Putra batam, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2022, August 2022 - August 2024 International
2022 - 2025 Academic Editor / Editor for Associate Editor for International Journal of Energy and Environment, NAUN Publications, United States Of America, December 2022, December 2022 - December 2025 International
2022 - 2025 Academic Editor / Editor for Associate Editor for Malaysian Journal on Composites Science & Manufacturing, Akademia Baru Publishing (M) Sdn Bhd, Malaysia, December 2022, December 2022 - December 2025 National
2022 - 2025 Academic Editor / Editor for Associate Editor for Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, Semarak Ilmu Publishing, Malaysia, December 2022, December 2022 - December 2025 International
2022 - 2024 Committee Member for Appointment as Editorial Team Member of Malaysian Journal on Composites Science and Manufacturing (MJCSM), Universiti Teknikal Melaka (UTEM), Malaysia, January 2022, January 2022 - December 2024 National
2022 - 2024 Auditor for Juruaudit Dalaman Sistem Pengurusan Kualiti (SPK) ISO9001 UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2022, August 2022 - July 2024 University
2021Assessor / Reviewer for Penilai untuk penilaian dan maklumbalas geran penyelidikan Politeknik Banting, Selangor., Politeknik Banting., Malaysia, May 2021, May 2021 National
2021External Assessor / External Reviewer, KDU University College, Malaysia, January 2021, January - April 2021 National
2021External Assessor / External Reviewer, kEMENTERIAN PENGAJIAN TINGGI, Malaysia, January 2021, January - December 2021 National
2021 - 2023 External Assessor / External Reviewer, MOSTI, Malaysia, January 2021, January 2021 - December 2023 National
2021Industrial Adviser for INVITATION AS ADVISORY COMMITTEE FOR ICMER 2021, Universiti Malaysia Pahang, Malaysia, August 2021, August - October 2021 National

YearDescriptionOrganiser
2022 UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (PENGURUSAN KEWANGAN EKSEKUTIF) UTHM

YearDescription
Organiser / Venue
Date
2024 KURSUS PEMBANGUNAN STAF FKMP - SIRI 2 2024: TEKNIK MUDAH BINA WEBSITE PROFESSIONAL DENGAN GOOGLE SITES.
FKMP,UTHM / Bilik Mesyuarat, Kompleks Teknologi G2, FKMP
22/07/2024
2024 8TH MECHYFEST: EXCELLENCE OF ANALYTICAL APPROACH
FKMP,UTHM / Kompleks Teknologi FKMP, Blok G2, UTHM
24/06/2024 - 25/06/2024
2024 TAKLIMAT PENGGUNAAN ITOS V1.0 FKMP
FKMP,UTHM / GOOGLE MEET
23/04/2024
2024 JERAYAWARA AMALAN PEMBELAJARAN TERADUN
UTHM / ATAS TALIAN (Ms TEAMS)
14/03/2024
2024 KURSUS PEMBANGUNAN STAF FKMP ? SIRI 1 2024: PENGURUSAN KENDIRI DOKUMENTASI LHDN: TEKNIK EFEKTIF & PRODUKTIF MENGGUNAKAN MICROSOFT 365.
FKMP,UTHM / BILIK MESYUARAT, KOMPLEKS TEKNOLOGI G2, FKMP
19/02/2024
2024 RMC SHARING SESSION SERIES 4/2024 PERMOHONAN GERAN PENYELIDIKAN PEMBANGUNAN (PRGS) TAHUN 2024 BERSAMA PROF. MADYA TS. DR. SULIADI FIRDAUS BIN SUFAHANI
UTHM / Microsoft Teams Meeting
30/01/2024
2024 MECHANICAL OPEN DAY
FKMP,UTHM / KOMPLEKS G2 FKMP
09/01/2024
2024 SESI TAKLIMAT DAN PROGRAM PROMOSI PUBLIC-PRIVATE RESEARCH NETWORK (PPRN) 2.0 BAGI FASA 1_2024 OLEH KEMENTERIAN PENDIDIKAN TINGGI (KPT) (RESPONSES)
UTHM / Microsoft Teams
04/01/2024
2023 KURSUS MENANGANI BULI DI TEMPAT KERJA
UTHM / ATAS TALIAN MELALUI MICROSOFT TEAMS
12/10/2023
2023 SESI PERKONGSIAN BERSAMA TIMBALAN DEKAN (HAL EHWAL PELAJAR DAN ALUMNI) DAN PENASIHAT AKADEMIK DAN KERJAYA (PAK) BAGI PROGRAM KAUNSELING D'HATY
UTHM / MICROSOFT TEAMS
10/08/2023
2023 LECTURERS CONFERENCE UTHM 2023
UTHM / DEWAN SULTAN IBRAHIM (DSI) UTHM
07/06/2023
2023 ANSYS SIMULATION CERTIFICATION COURSE ON SELF-EXPANDING STENTS
LAIN-LAIN / Online
20/02/2023 - 22/02/2023
2023 OPENLEARNING ONBOARDING COURSE
UTHM / ZOOM MEETING
11/01/2023
2022 SESI PERKONGSIAN ILMU `WRITING BOOK CHAPTERS?
FKMP,UTHM / ATAS TALIAN (GOOGLE MEET)
12/10/2022
2022 PROGRAM PERKONGSIAN ILMU 'INDUSTRIAL ENGAGEMENT
FKMP,UTHM / GOOGLE MEET
14/09/2022
2022 PROGRAM PERKONGSIAN PENGALAMAN 'BUKU TERBAIK ANUGERAH INSPIRASI CENDEKIAWAN 2021 (KATEGORI SAINS, TEKNOLOGI & PEMBUATAN)
FKMP,UTHM / GOOGLE MEET
13/09/2022
2022 UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (PENGURUSAN KEWANGAN EKSEKUTIF)
UTHM / THE KATERINA HOTEL
23/08/2022
2022 BAGAIMANA UNTUK MENYEDIAKAN DAN MELAKSANAKAN DAFTAR BAHAN KIMIA BERBAHAYA
FKMP,UTHM / MAKMAL CAD 2, BLOCK G3
10/04/2022
2022 PRODUCING INDUSTRY-READY GRADUATES: CURRENT CHALLENGES
UTHM / GOOGLE MEET
31/03/2022
2022 ADVANCE TEACHING TECHNOLOGY SERIES. SERIES 2: DRONE FLYING & HANDLING INTENSIVE COURSE
LAIN-LAIN / UNIVERSITI TUN HUSSIEN ONN MALAYSIA
16/03/2022 - 17/03/2022
2022 ADVANCE TEACHING TECHNOLOGY SERIES. SERIES 1: 3D PRINTING INTENSIVE COURSE
LAIN-LAIN / BLOK E10, UNIVERSITI TUN HUSSIEN ONN MALAYSIA
09/03/2022 - 10/03/2022
2022 ADVANCED TEACHING TECHNOLOGY SERIES. SERIES 1: 3D PRINTING INTENSIVE COURSE [C2427]
LAIN-LAIN / UTHM
09/03/2022 - 10/03/2022
2022 TAKLIMAT AUDIT FAKULTI MYRA BAGI TAHUN 2021, FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN (FKMP) SECARA ATAS TALIAN
FKMP,UTHM / ZOOM
24/02/2022
2022 PROGRAM BUAL BICARA STAF FKMP BERSAMA DATO' SRI IBRAHIM B.AHMAD- LEMBAGA PENGARAH UTHM SECARA HIBRID
FKMP,UTHM / YOUTUBE (HIBRID)
26/01/2022
2022 KURSUS SUCCESSFUL INDUSTRY- ACADEMIA ENGAGEMENT
UTHM / GOOGLE MEET
17/01/2022
2021 WEBINAR PANDUAN ASAS HIRARC
FKMP,UTHM / Zoom Webinar
28/10/2021
2021 [SIRI 1] BENGKEL PENYEDIAAN SKTU 2022 UTHM_FUNGSI 2 : UTHM TECHNOPRENEUR (F2.1 - INOVASI DAN KOMERSIALISASI & F2.2 - PENINGKATAN KEKAYAAN)
UTHM / BILIK BANQUET, DEWAN SULTAN IBRAHIM, UTHM
18/10/2021
2021 LATIHAN ASAS PENGENDALIAN BAHAN KIMIA
FKMP,UTHM / ZOOM WEBINAR
06/10/2021
2021 KHAS UNTUK PEMBANGUN MOOC UTHM; CARA MUDAH DAN PANTAS BUAT VIDEO PENGAJARAN DENGAN OBS STUDIO
UTHM / Atas Talian
06/10/2021
2021 KURSUS ASAS KESELAMATAN KEBAKARAN DAN TATACARA PENGUNGSIAN BANGUNAN
FKMP,UTHM / ZOOM MEETING
28/09/2021
2021 WEBINAR OSH 2021- KESELAMATAN DAN KESIHATAN PEKERJAAN: HAK VS PERANAN
FKMP,UTHM / ZOOM
26/09/2021
2021 SESI TAKLIMAT PERLAKSANAAN PROGRAM SEKOLAH ANGKAT
UTHM / APLIKASI ZOOM
12/08/2021
2021 TAKLIMAT BAGI JURUAUDIT BERKAITAN AUDIT DALAMAN KUALITI ISO 9001:2015 UTHM 2021
PUSAT PEMBANGUNAN AKADEMIK, UTHM / GOOGLE MEET
05/08/2021
2021 KOLOKIUM PENYELIDIKAN SEM 2 SESI 2020/2021
UTHM / google meet platform
13/06/2021 - 15/06/2021
2021 INDUSTRIAL TALK: MATERIALS TESTING - THE IMPORTANCE OF TESTING IN AEROSPACE MANUFACTURING INDUSTRY
FKMP,UTHM / UTHM: Online (google meet)
06/06/2021
2021 PERKONGSIAN PENGALAMAN: PEMENANG ANUGERAH JURUTEKNIK SAINS NEGARA 2016
FKMP,UTHM / Zoom: https://uthm-edu-my.zoom.us/j/92975342394
01/06/2021
2021 TAKLIMAT DAN PENDAFTARAN RESEARCH ID FKMP DAN FPTV
UTHM / ATAS TALIAN
24/05/2021
2021 PTTA RESEARCH WEEK WEBINAR 24 MEI SIRI 2
UTHM / online/meet
24/05/2021
2021 TAZKIRAH MENGETUK PINTU AR-RAYAN
FKMP,UTHM / PLATFORM ZOOM
29/04/2021
2021 SESI PERKONGSIAN ILMU: PERMOHONAN GERAN KONSORTIUM KECEMERLANGAN PENYELIDIKAN (KKP) BERSAMA YBRS. PROF. MADYA DR. NOR AZIATI BINTI ABDUL HAMID
UTHM / GOOGLE MEET
25/04/2021
2021 PERKONGSIAN ILMU: PERMOHONAN GERAN KONSORTIUM KECEMERLANGAN PENYELIDIKAN (KKP) BERSAM YBRS. PROF. MADYA DR. NOR AZIATI BINTI ABDUL HAMID
UTHM / GOOGLE MEET
25/04/2021
2021 KURSUS PEMBANGUNAN MOOC SIRI 2/2021
UTHM / Secara dalam talian: Zoom Meeting
11/04/2021
2021 OCCUPATIONAL SAFETY AND HEALTH COORDINATOR (OSH-C)
LAIN-LAIN / KELAS ATASTALIAN DI INTESH.
05/04/2021 - 07/04/2021
2021 TAKLIMAT BROADLY- DEFINED ENGINEERING PROBLEMS AND ENGINEERING ACTIVITIES
UTHM / ZOOM MEETING
29/03/2021
2021 KURSUS INTENSIF PENULISAN BERITA, RENCANA AKHBAR & MEDIA RELEASE
UTHM / BILIK LATIHAN SERI TERATAI
17/03/2021 - 18/03/2021
2021 TAKLIMAT DAN PENYEDIAAN PROPOSAL BAGI PROJEK PPRN 2.0
UTHM / WAR ROOM, ICC
08/03/2021
2021 SEMINAR SERVICE LEARNING MALAYSIA-UNIVERSITY FOR SOCIETY (SULAM) DAN SULAM.NET
PUSAT PEMBANGUNAN AKADEMIK, UTHM / WEBINAR
04/03/2021
2021 BENGKEL PEMANTAPAN DAN LATIHAN PANEL PENILAIAN APEL (A)
UTHM / GOOGLE MEET
22/02/2021
2021 PROGRAM BUAL BICARA MYFKMP 2.0: PROSES DAN SISTEM KENAIKAN PANGKAT STAF AKADEMIK UTHM 2022
FKMP,UTHM / ZOOM
27/01/2021
2021 SIRI BUAL BICARA' STRATEGIC PARTNERSHIP PROGRAMME (STEP) : TRANSPORTATION INDUSTRY : CURRENT CHALLENGES & FUTURE TRENDS '
UTHM / APLIKASI ZOOM
20/01/2021
2021 PROGRAM KOLOKIUM PENYELIDIKAN SEM 1 SESI 2020/2021
UTHM / -
10/01/2021 - 11/01/2021
2021 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
PEJABAT PENDAFTAR,UTHM / GOOGLE MEET
05/01/2021

ID IPTITTLE PRODUCTTYPE OF IP NO. APPLICATIONROLE
PT67 An Apparatus For Extraction of leaf Fibre Paten (Patent) PI 2013701429 PEREKA CIPTA/PENYELIDIK BERSAMA
PT49 A Method of producing Paper From Pineapple Fibres Paten (Patent) PI2012700290 PEREKA CIPTA/PENYELIDIK BERSAMA

TAHUN NAMA ANUGERAH / PENCAPAIAN PENGANUGERAH PERINGKAT
2023 Anugerah Taat SetiaUTHMUNIVERSITI
2019 JURNAL UTHMUTHMUNIVERSITI
2016 ANUGERAH KHAS PANEL PEMBANGUNAN SUMBER MANUSIAUTHMUNIVERSITI
2013 ANUGERAH JASA BAKTI UTHMUNIVERSITI
2012 ANUGERAH PERKHIDMATAN CEMERLANGUTHMUNIVERSITI
2006 ANUGERAH PERKHIDMATAN CEMERLANGKUITTHOUNIVERSITI