PROF. MADYA Ts. Dr. NORAINI BINTI MARSI
DS54 PROFESOR MADYA
Jabatan Teknologi Kejuruteraan Mekanikal
Fakulti Teknologi Kejuruteraan
CONTACT DETAILS
0178925540
BIOGRAPHY
Noraini Marsi is associate professor in the Faculty of Engineering Technology at Universiti Tun Hussein Onn Malaysia (UTHM). She has also served as a principal researcher (PR) in the Center of Excellence (CoE) in the Advanced Manufacturing and Materials Centre (AMMC). Her niche area on materials, manufacturing, and mechanical for sustainable technology. She has supervised 45 Final Year Project (FYP) students. Noraini also successfully collaborated with more than 10 companies/institutes through her coordination of LOIs, MoUs, and MoAs.
PROFESSIONAL APPOINTMENTS
DS54 Profesor Madya
ACADEMIC QUALIFICATION
| DOKTOR FALSAFAH KEJURUTERAAN MIKRO DAN NANOELEKTRONIK , UNIVERSITI KEBANGSAAN MALAYSIA (2015) |
| SARJANA KEJURUTERAAN MEKANIKAL , UNIVERSITI TUN HUSSEIN ONN MALAYSIA (2011) |
| SARJANA MUDA MEKANIKAL DAN BAHAN , UNIVERSITI TEKNOLOGI MALAYSIA (2009) |
| DIPLOMA KEJURUTERAAN MEKANIKAL , UNIVERSITI TEKNOLOGI MALAYSIA (2006) |
FIELD OF EXPERTISE
| Category | Expertise |
|---|---|
| Field Category (KPT) : | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
| Field (KPT) : | Engineering Science and Technology |
| Field of Specialization (KPT) : | Engineering Science and Technology |
AREAS OF RESEARCH INTEREST
MEMS Pressure Sensor
MEMS Packaging
Waste Materials
INNOVATION FIELD OF INTEREST
Silicon Carbide MEMS
Green Materials and resources
COMSOL Simulation
MANAGEMENT EXPERIENCE
| Date | Description |
|---|---|
| 01/06/2021 - 31/05/2025 | Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
| 01/01/2023 - 31/12/2024 | Penyelidik Bersekutu
Fakulti Teknologi Kejuruteraan, Sustainable Engineering Technology Research Centre (SETechRC) |
| 01/09/2023 - 31/08/2024 | Felo Kolej Kediaman
Pusat Perumahan Pelajar, Kolej Kediaman Kampus Pagoh |
| 22/05/2019 - 21/05/2024 | Penyelidik Bersekutu
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
| 01/06/2021 - 31/12/2023 | Penyelidik Bersekutu
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Mechanical Failure Prevention and Reliability Research Center (MPROVE) |
| 01/09/2022 - 31/08/2023 | Felo Kolej Kediaman
Pusat Perumahan Pelajar, Kolej Kediaman Kampus Pagoh |
| 01/09/2021 - 31/08/2022 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 1, Unit Pentadbiran |
| 01/06/2020 - 31/05/2022 | Ketua Kumpulan Fokus (FG)
Fakulti Teknologi Kejuruteraan, Innovative Manufacturing Technology (IMT) |
| 02/05/2019 - 01/05/2022 | Penyelidik Bersekutu
Fakulti Teknologi Kejuruteraan, Automotive and Combustion Synergies Technology Group (ACST) |
| 01/09/2020 - 31/08/2021 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 1, Unit Pentadbiran |
| 01/09/2019 - 31/12/2020 | Ketua Makmal
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
| 01/09/2019 - 31/08/2020 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 1, Unit Pentadbiran |
| 01/01/2018 - 31/12/2019 | Ketua Kumpulan Fokus (FG)
Fakulti Teknologi Kejuruteraan, Innovative Manufacturing Technology (IMT) |
| 01/09/2018 - 31/08/2019 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 1, Unit Pentadbiran |
| 01/10/2016 - 30/09/2018 | Ketua Makmal
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
| 01/09/2017 - 31/08/2018 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 1, Unit Pentadbiran |
| 15/01/2016 - 31/12/2017 | Penyelidik Kanan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
PROFESSIONAL SOCIETIES
| Year | Description | Role | Level |
|---|---|---|---|
| 2018 - 9999 | Malaysia Board of Technologists (MBOT) | Teknologis Berijazah | Kebangsaan |
| 2013 - 9999 | Board of Engineers Malaysia (BEM) | Jurutera Siswazah | Kebangsaan |
| 2013 - 9999 | International Association of Engineers (IAENG) | Ahli | Antarabangsa |
| 2021 - 2022 | Malaysia Board of Technologists (MBOT) | Ahli | Kebangsaan |
| 2020 - 2022 | International Association of Innovation Professionals (IAOIP) | Associate Member | Kebangsaan |
| 2019 - 2021 | Malaysia Board of Technologists (MBOT) | Teknologis Profesional | Kebangsaan |
| 2020 - 2020 | International Association of Engineers (IAENG) | Member | Antarabangsa |
TEACHING EXPERIENCE
| Year | Description | Level |
|---|---|---|
| 2024 | Mechanics Of Machine [BNJ20303], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Solid Mechanics [BNJ20903], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2023 | Committee Member for Ahli Jawatankuasa SULAM bagi Kursus Keselamatan dan Kesihatan Pekerjaan di Kolej Vokasional Muar (KOVAR) Anjuran Fakulti Teknologi Kejuruteraan, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 | University |
| 2023 | Head for Pelantikan Ketua Pemurnian 6 Kursus Kurikulum (BNJ20903 - Solid Mechanics), Ijazah Sarjana Muda Teknologi Kejuruteraan Mekanikal (Automotif) Dengan Kepujian (BNG) Fakulti Teknologi Kejuruteraan , UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 | University |
| 2023 | Head of the Program for Arahan menjalankan tugas Ketua Pogram Sarjana Muda Teknologi Kejuruteraan Mekanikal (Automotif) Dengan Kepujian, FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023 | University |
| 2023 | Head of the Program for Pelantikan menjalankan Tugas Ketua Program Sarjana Muda Teknologi Kejuruteraan Mekanikal (Automotif) dengan Kepujian, FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2023 | University |
| 2023 | Instructor/lecturer for Pensyarah Kursus Sarjana dan Doktor Falsafah Teknologi Kejuruteraan Sem 1 Sesi 2023/2024 Program Pascasiswazah , Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2023 | University |
| 2023 | Research Methodology [KNT10003], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Research Methodology [PNT10003], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Secretary for Pelantikan sebagai Setiausaha bagi Program Lawatan Penandaarasan Program Ijazah Sarjana Muda Teknologi Kejuruteraan Mekanikal (Automotif) dengan Kepujian bagi Memenuhi Standard KPM dan MBOT serta Kerjasama Strategik di antar Kolej Vokasional Kota Tinggi dan Fakulti Teknologi Kejuruteraan, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2023 | University |
| 2023 | Solid Mechanics [BNJ20903], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Solid Mechanics [BNJ20903], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Statics [BNT10303], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2022 | Course Coordinator for Pemurnian Kurikulum 6, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2022 | University |
| 2022 | English Development And Engagement [UHB12902], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Solid Mechanics [BNJ20903], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Statics [BNJ10203], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2021 | Engineering Laboratory I [BNJ27101], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Solid Mechanics [BNJ20903], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Solid Mechanics [BNJ20903], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2020 | Engineering Laboratory Ii [BNJ27301], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | Solid Mechanics [BNJ20903], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | Solid Mechanics [BNJ20903], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2019 | Industrial Engineering & Quality Management [BNJ30403], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Research Methodology [KNT10000], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Research Methodology [PNT10000], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Solid Mechanics [BNJ20903], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Solid Mechanics [BNJ20903], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2018 | Advance Nonwovens Technology [BNH30703], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Engineering Laboratory Ii [BNJ27301], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Engineering Laboratory Iii [BNJ37201], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Research Methodology [KNT10000], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Research Methodology [PNT10000], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Solid Mechanics [BNJ20903], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Solid Mechanics [BNJ20903], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Solid Modeling [BNJ10503], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2017 | Dynamics [BNJ20103], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Engineering Laboratory Ii [BNJ27301], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Engineering Laboratory Iii [BNJ37201], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Statics [BNJ10203], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Technicaltextile [BNH40503], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2016 | Cad & Modeling [BNJ10502], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Control Engineering & Instrumentation [BNJ20403], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Dynamics [BNJ20103], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Statics [BNJ10203], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Engineering Drawing [BNJ10102], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Engineering Laboratory Iii [BNJ37201], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Solid Mechanics [BNJ20903], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
RESEARCH GRANTS AND CONTRACTS
| Code | Title | Designation | End Date |
|---|---|---|---|
| K444 | A NEW METHODOLOGY FOR ASSESSING THE SUSTAINABILITY OF 3D BONE TISSUE ENGINEERING SCAFFOLDS USING FUZZY LOGIC APPROACH AND ANALYTICAL HIERARCHY PROCESS METHOD | Ahli | 31/08/2025 |
| K489 | Thermal, fire, and acoustic properties of Palm Empty Fruit Bunch waste reinforced fiberglass (PEFB-FG) as sustainable insulation materials. | Ahli | 19/07/2025 |
| Q517 | VALIDATION OF VEHICLE DYNAMICS MOTION BETWEEN ELECTRIC AND CONVENTIONAL VEHIICLE ON RIDE AND HANDLING MOTION | Ahli | 30/06/2025 |
| Q520 | Utilization of Adaptive Cycle Time Measurement System (ACTMS) for Lean Manufacturing Line Balancing Study and Monitoring | Ahli | 30/06/2025 |
| Q569 | CHARACTERISTIC OF FOAMED CONCRETE-BASED RESIN WASTE (FC-RW) FOR NON-LOADING WALL | Ketua | 30/04/2025 |
| Q572 | Characterization of Resin Waste (RW) Reinforced Recycled High-Density Polyethylene (R-HDPE) for RW/R-HDPE Composite for Permeable Pavement. | Ketua | 30/04/2025 |
| Q594 | Acoustic Absorption Characteristics Enhancement of Bamboo fiber-Latex bio-composite Employing Non-woven Thermal Bonding Process Optimization. | Ahli | 30/04/2025 |
| K431 | Characterization of hydrophobic polyurethane foam mixed-rubber waste (HPUC) towards optimal flowability fill injection in a high vibration railway ballast track settlement restoration | Ahli | 28/02/2025 |
| K291 | Investigation on bio-based micro-porous polymer foams blended with natural blowing agent to suppress unwanted gaseous formation. | Ahli | 31/10/2024 |
| Q310 | Characteristics of Biodegradable Polymer Plastic Thin Film-based Banana Peel (Musa Paradisiaca) | Ketua | 30/09/2024 |
| Q315 | Utilization of Rise Husk Fiber (RHF) Blended Recycled Polyethylene (PE) for RHF/PE Polymer composites | Ketua | 30/09/2024 |
| Q316 | THE MECHANICAL CHARACTERISTICS OF COCONUT FIBRE (CF) BLENDED RECYCLED POLYETHYLENE (RPE) FOR CF/RPE POLYMER COMPOSITE APPLICATION | Ketua | 30/09/2024 |
| K439 | Characterization of a biodegradable composite film containing black soldier fly exuviae (Hermetia illucens) as natural fillers | Ahli | 31/08/2024 |
| M039 | Optimization on New Design of Geo-Tube Structure with Improve Shape Stability. | Ahli | 30/06/2024 |
| Q235 | Ulitilising Different Ratio of Plastic Waste Composition to Produce an Eco-brick as A Sustainable Building Material | Ahli | 15/05/2024 |
| M104 | Development of an Alternative Ceiling Board from Waste Materials | Ahli | 30/04/2024 |
| M105 | Development of Permeable Pavement of HDPE Reinforced Resin Waste (Eco-Pave HDPE-Resin) | Ketua | 30/04/2024 |
| M114 | DEVELOPMENT OF ECO-SOIL BINDER WITH OPTIMISING BY-PRODUCT RESOURCES | Ahli | 30/04/2024 |
| Q029 | Performance of Sago Fine Waste (SFW) as Replacement Material in Bricks | Ahli | 30/04/2024 |
| Q266 | Fabrication of Permeable Pavement of HDPE Reinforced Resin Waste (Eco-Pave HDPE-Resin) | Ahli | 30/04/2024 |
| K397 | Fire Resistance Properties of Autoclaved Aerated Concrete Based Ceramic Industrial Waste (AAC-CIW) on Building Wall Application | Ketua | 06/03/2024 |
| M027 | An optimization of MyFlexitank Design | Ahli | 01/12/2023 |
| M026 | An optimization of heating pad design | Ahli | 30/11/2023 |
| M028 | Development of Retention Liners for Opened-Sytem and Closed-System Transportation. | Ahli | 30/11/2023 |
| Q062 | Development of MyFlexitank Design for Transport Applications | Ahli | 31/10/2023 |
| M089 | RESIP: CHARACTERISTIC AND ANALYSIS OF PACKAGING MATERIALS, CARDBOARD PACKAGING AND PAPER | Ketua | 31/08/2023 |
| H895 | Development of Malaysian Bamboo Bio-Plates | Ahli | 31/07/2023 |
| M038 | Development of Geo-Tube Structure with Improved Shape Stability | Ahli | 30/06/2023 |
| H875 | Fabrication and Verification for New Model Design of Geo-Tube Structure. | Ahli | 30/04/2023 |
| K339 | Fundamental Research on Strength and Fire Resistance Properties of Autoclaved Aerated Concrete based Ceramic Waste (AAC-CW) as a Building Materials. | Ketua | 30/04/2023 |
| B099 | Municipal Solid Waste Polymer Composites (M-PoCs) Deck Panel | Ahli | 14/02/2023 |
| K347 | Feasibility Study on used of Retention Liners for Opened-System and Closed-System Transportation. | Ahli | 31/01/2023 |
| M056 | RE-SIP: DEVELOPMENT OF WOOD POLYMER COMPOSITE (WPC) REINFORCED PLASTIC WASTE | Ketua | 31/01/2023 |
| K217 | Effect of plasma gasification process with double stages steam and air oxidiser on the production of hidrogen-rich syngas using various solid waste as feedstock | Ahli | 30/11/2022 |
| X167 | Synthesis and photocatalytic activity of AC/TiO2-Cu ternary composite for degradation of metronidazole antibioticunder UV, visible and sunlight radiation | Ahli | 30/11/2022 |
| M070 | Development of MyFlexitank Design | Ahli | 31/10/2022 |
| H731 | CHARACTERIZATION OF POLYURETHANE WASTE COMPOSITE FOR SOIL IMPROVEMENTS | Ahli | 30/04/2022 |
| H734 | ENVIRONMENTAL IMPACT ASSESSMENT OF 3D PART BONE TISSUE ENGINEERING | Ahli | 30/04/2022 |
| H512 | Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Textiles processing of bamboo fiber for yarns and nonwovens production | Ahli | 31/12/2021 |
| H864 | Development of Municipal Solid Waste Polymer Composites (M-PoCs) for Deck Panel Applications | Ketua | 30/11/2021 |
| M022 | Development on Municipal Solid Waste (MSW) Polymer Composites (MPCs) | Ketua | 30/11/2021 |
| B095 | Ceramic Aircrete | Ketua | 31/10/2021 |
| H250 | Assessment of Ergonomic Risk Factor on Workers Repetitive Tasks at Poultry Feed Industries | Ahli | 30/09/2020 |
| A162 | Tapioca Peeling Machine | Ahli | 10/09/2020 |
| X171 | Smart Tapping Knife 3.0 (STK 3.0) | Ahli | 31/08/2020 |
| H339 | Utilization of Natural Dyes as Antimicrobial properties for Green Technology Dyeing in Textile Applications | Ketua | 30/06/2020 |
| H340 | UTILIZATION THE PERFORMANCES OF MUNICIPAL SOLID WASTE MIXED POLYMER COMPOSITES (MSWPC) TO PRODUCE PARTITION WALL PANEL (PWP) INTO BUILDING MATERIALS | Ketua | 30/06/2020 |
| H341 | INTERACTION OF PALM OIL AS NEWLY ECO-RESIN TO FORM SUPERHYDROPHOBIC COATING FOR ANTIMICROBIAL TEXTILE | Ketua | 30/06/2020 |
| M010 | Energy Consumption Replacement Research, Water Heat Efficiency and Noise Reduction of Vacuum Cleaner Panasonic Product | Ketua | 30/06/2020 |
| H464 | THE INFLUENCE OF COATING TECHNIQUES ON SUPERHYDROPHOBIC PROPERTIES OF FABRICS. | Ketua | 30/11/2019 |
| U654 | Enhanced Water Flux of Thin-Film Nanocomposite (TFN) Nanofiltration Membranes by Embedding Metal-Organic Frameworks (MOFs) into the Membrane Substrates for Water Desalination | Ahli | 31/12/2018 |
| U666 | The Formulation And Synthesis Of Superhydrophobic Coating Based On Coconut Oil Reinforcing Natural Pigment For Self-Cleaning And Protective Nani-Coating | Ketua | 14/12/2018 |
| B075 | co-KEV Protective Panel : A High Impact Resistance Panel | Ahli | 13/07/2018 |
PUBLICATIONS
| Book |
|---|
| Noraini Marsi, Muhammad Haikal Mohd Fodzi, Nor Mazlana Main, Shaiful Rizal Masrol (2020) Green Composite Manufacturing Technology, UNIVERSITI TUN HUSSEIN ONN MALAYSIA , 1, ISBN:9789672389859 |
| Noraini Marsi, Rupashinii Thana Singam, Salwa Mahmood and Siti Aida Ibrahim (2020) Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 1, ISBN:9789672389613 |
| Noraini Marsi, Nur Athirah Huzaisham, Nor Mazlana Main, Muhammad Farid Shaari and Azrin Hani ABdul Rashid (2019) Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 1, ISBN:9789672306740 |
| Mohd Razali Ibrahim dan Noraini Marsi (2017) Kajian Terhadap Lapisan Cat Superhydrophobic Berasaskan Minyak Kelapa Untuk Di Aplikasi Di Permukaan Kaca, Fabrik Dan Konkrit, UTHM , 1, ISBN:23456781 |
| Anis Nasuha Noor Azman and Noraini Marsi (2017) The Study Of Natural Pigment Based Of Dragon Fruit Into Superhydrophobic Coating For Piping Plant Surfaces, UTHM , 1, ISBN:45678912 |
| Siti Nur Najiha Nor Baharin and Noraini Marsi (2017) The Study Of Organic Pigment (Betalain) As A Surface Coating For Protection Layer On Piping Plant Application, UTHM , 1, ISBN:345678123 |
| Nur Aqillah Mohd Shamsuddin Tan and Noraini Marsi (2017) The Study Of Pigment Extracted From Turmeric Into Superhydrophobic Coating For Car Surface Application, UTHM , 1, ISBN:56789123 |
| Muhammad Hamni Yusoff and Noraini Marsi (2016) Kajian Mengenai Gentian Tandan Kosong Kelapa Sawit (Tkks) Menghasilkan Kertas Dengan Campuran Kotak Kitar Semula, UTHM , 1, ISBN:87654321 |
| Mohd Hanifuddin Md Kamil and Noraini Marsi (2016) Mengkaji Gentian Kaca Berteraskan Hampas Tebu Bagi Aplikasi Pembahagi Ruang, UTHM , 1, ISBN:12345678 |
| Safirul Amri Mohd Nizam and Noraini Marsi (2016) Mesin Semi Auto Roti Jalan, UTHM , 1, ISBN:67891234 |
| Noraini Marsi (2009) Performance Of Water Base Degreases In Electronic Part Manufacturing, Universiti Teknologi Malaysia , 1, ISBN:CP028606 |
| Book Chapters |
| SYAHMI WAFIY MOHD SHARIFF, MOHAMAD KHAIRI AHMAD, IZUAN AMIN ISHAK, NIK NORMUNIRA MAT HASSAN, DALILA MOHD HARUN, RAHMAH MAHMUDIN, MOHD FAISAL HUSHIM, NORAINI MARSI (2023) Linear Encoder, Sensors Technology, Application And Future Trends, UTHM , 45, ISBN:9786297566320 |
| Nurul Ainina Nadhirah Tajurahim, Salwa Mahmood, Noraini Marsi, Tengku Nur Azila Raja Mamat (2022) Chapter 7: Improvement Of Facilities Layout Planning Related With Safety: A Case Study At Quarry , Multidisciplinary Engineering Science And Advanced Technology Series 1 , UTHM , 62, ISBN:9789672817406 |
| Nik Normunira Mat Hassan, Aida Atiqah Atil, Adyla Illyana Roseli, Tengku Nur Azila Raja Mamat, Fatimah Mohamed Yusop, Anika Zafiah Mohd Rus, Noraini Marsi, Nurulsaidatulsyida Sulong, Hafsa Mohammad Noor (2022) Chapter 8: Determination Of Vibration Transmissibility On Slab Track-Bridge Lrt Railway Structure, Multidisciplinary Engineering Science And Advanced Technology Series 1, UTHM , 81, ISBN:9789672817406 |
| Nik Normunira Mat Hassan, Zuliazura Mohd Salleh, Noraini Marsi, Fatimah Mohamed Yusop, Norafzanizam Samiran, Ahmad Luqman Bin Abdul Manaf , Muhd Shahrul Nizam Bin Muhd Taib, Nurhamirul Bin Rahiman (2022) Chapter 8: Spherical Pressure Vessel, Design Of Pressure Vessel, UTHM , 69, ISBN:9789672817932 |
| Nik Normunira Mat Hassan, Noraini Marsi, Fatimah Mohamed Yusop, Nor Afzanizam Samiran, Ahmad Faiz Azharuddin, Muhammad Khairul Ikhwan Mahusin, Muhamad Radzi Mustar, Nur Nabiha Mohammad Isman, Nabilah Zainal, Nur Ezani Amira Hamidun (2022) Horizontal Cylindrical Pressure Vessel, Design Of Pressure Vessel, UTHM , 54, ISBN:9789672817932 |
| Faiz Hakimi Mohamed, Farid Zulhilmi Amri, Nurhadi Hidayat Mohd Haizam, Raynabelle Emilia Anak Raymond, Thines Selvaraj, Tengku Nur Azila Raja Mamat, Noraini Marsi, Nurazwa Ahmad (2022) Implementation Of Inventory Management In Small And Medium Enterprise (Sme): Case Study At Sai Kee Coffee, Manufacturing Management And Improvement: Case Study Series 3, UTHM , 55, ISBN:9789670061412 |
| Noraini Marsi, Muhammad Haikal Mohd Fodzi, Mohamad Mohshein Hashim, Anika Zafiah Mohd Rus, Roslinda Ali and Mohd Ridzuan Mohd Jamir (2021) Chapter 1: A Review - Recycling Types Of Municipal Solid Waste (Msw) For Bioproducts Development, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 1, ISBN:9789672817109 |
| Aida Atiqah Atil, Nik Normunira Mat Hassan, Fatimah Mohamed Yusop, Anika Zafiah Mohd Rus, Noraini Marsi, Razlin Abdul Rashid, Tuan Noor Hasanah Tuan Ismail, Nurulsaidatulsyida Sulong and Hafsa Mohammad Noor (2021) Chapter 2: A Review Study On Pre-Treatment Method For Recycling Polymer Waste, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 19, ISBN:9789672817109 |
| Muhammad Aizrul Ezuan Edirudzin, Salwa Mahmood, Nurul Ainina Nadhirah Tajurahim, Noraini Marsi and Nor Hasrul Akhmal Ngadiman (2021) Chapter 3: Method For Determination Of Product-End-Life (Eol) Option Using Multi Criteria Decision Analysis For Bioproduct Paper , Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 28, ISBN:9789672817109 |
| Noraini Marsi, Nursyuhada Mohd Johari, Mohamad Mohshein Hashim, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan and Mohd Ridzuan Mohd Jamir (2021) Chapter 7: Characterization Of Wall Partition Bioproducts From Plastic Waste Reinforced Polyurethane Foam Composites, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 74, ISBN:9789672817109 |
| Noraini Marsi, Zuraidah Ithnain, Anika Zafiah Mohd Rus, Abdul Mutalib Leman, Nor Mazlana Main and Mohd Ridzuan Mohd Jamir (2021) Chapter 8: Mechanical Properties Of Playground Floor Bioproducts Based On Plastic Waste - Silicone Rubber Composites, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 86, ISBN:9789672817109 |
| Noraini Marsi, Erra Saffirra, Anika Zafiah Mohd Rus, Abdul Mutalib Leman, Salwa Mahmood and Mohd Ridzuan Mohd Jamir (2021) Chapter 9: Bioproduct Development And Characterization Of Geotextiles Based On Ldpe Plastic Waste, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 98, ISBN:9789672817109 |
| Nor Mazlana Main, Noraini Marsi, Syahmi Irfan Saifuddin, Shaiful Rizal Masrol, Mohd Faizal Esa, Md Zin Ibrahim and Yong Tze Mi (2021) Development Of Laminated Paperboard Bioproducts As Microwavable Food Container For Packaging Application, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 62, ISBN:9789672817109 |
| Noraini Marsi, Thineshnaidu Lethumanan, Mohamad Mohshein Hashim, Anika Zafiah Mohd Rus, Mohd Ridzuan Mohd Jamir and Nurhafizzah Hassan (2021) Development Of Tile Bioproducts From Plastic Waste (Pw) Reinforced Wood Waste (Ww) Composites, Recycling Municipal Of Solid Waste (Msw) As A Resources For Bioproducts Development, UTHM , 111, ISBN:9789672817109 |
| Nor Mazlana Main, Noraini Marsi, Nurul Syahirah Serat and Mohd Faizal Esa (2021) High Density Polyethylene (Hdpe) Film Lamination Bioproducts As A Layered For Material Of Cements Packaging, Recycling Of Municipal Solid Waste (Msw) As A Resource For Bioproducts Development, UTHM , 52, ISBN:9789672817109 |
| Noraini Marsi, Rupashinii Thana Singam, Anika Zafiah Mohd Rus, Muhammad Zulkipli, Haffidzudin Hehsan and Azli Nawawi (2020) Chapter 1: Overview On Different Type Of Composite Materials For Footwear Application, Green Composite Manufacturing Technology, UTHM , 1, ISBN:9789672389859 |
| Nik Normunira Mat Hassan, Anika Zafiah M. Rus, Aslinda Saleh, Noraini Marsi, Fatimah Mohamed Yusop, Norafzanizam Samiran,Nurulsaidatulsyida Sulong, Tuan Noor Hasanah Tuan Ismal, Hafsa Mohammad Noor, (2020) Chapter 3 Mechanical Characterization Of Abs Recycling Based On Waste Electric And Electronic Equipment (Weee) By Using Injection Molding, Mechanical, Materials And Manufacturing Engineering: Case Studies, UTHM , 20, ISBN:978-967-2389- |
| Noraini Marsi, Athirah Zakaria, Anika Zafiah Mohd Rus, Salwa Mahmood, Nor Mazlana Main, Zuliazura Mohd Salleh and Yong Tze Mi (2020) Chapter 5: Utilization Dyeing Process Of Coffea Pigment As Superhydrophobic Coating On Fabric Application, Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 37, ISBN:9789672389613 |
| Noraini Marsi, Tan Ka Seng, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan, Siti Hana Nasir and Tengku Nur Azila Raja Mamat (2020) Chapter 6: Superhydrophobic Dyeing Of Orange Fruit Pigment On Cotton Knitted Textile Application, Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 44, ISBN:9789672389613 |
| Noraini Marsi, Chew Gin Yan, Anika Zafiah Mohd Rus, Siti Zaharah Kunchi Mon, Rosniza Hussain @ Isa, Nurasyikin Misdan and Norirda Mohamed (2020) Chapter 7: Investigation Of Dyeing Based On Pandanus Amaryllifolius For Superhydrophobic Coating In Cotton Polyester Blended In Textile Application, Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 52, ISBN:9789672389613 |
| Noraini Marsi, Wardah Sidni, Anika Zafiah Mohd Rus, Azrin Hani Abdul Rashid, Aslinda Saleh and Razlin Abd Rashid (2020) Chapter 8: The Effects Of Lawsonia Inermis Pigmentation For Superhydrophobic Properties On Cotton Fabrics, Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 59, ISBN:9789672389613 |
| Salwa Mahmood, Noraini Marsi, Anis Jazira Jalil, Kumudha A/P Mathava and Nuraisyah Taib (2020) Environmental Effects Of Natural Dyes And Syntetic Dyes: A Comparison , Green Technology Of Natural Dyes For Sustainable Development On Textile Industry , UTHM , 18, ISBN:9789672389613 |
| Noraini Marsi, Nur Athirah Huzaisham, Zuraidah Ithnain, Nor Mazlana Main and Anika Zafiah Mohd Rus (2020) Fabrication And Characterization Of Hdpe Plastic Waste Reinforced Rubber Composite, Green Composite Manufacturing Technology, UTHM , 67, ISBN:9789672389859 |
| Noraini Marsi,Muhammad Haikal Mohd Fodzi, Lingeshvaran Subramaniam, Anika Zafiah Mohd Rus, Faizal Esa, Wan Mohd Wardi Wan Abdul Rahman (2020) Fabrication And Physical Properties Of Pipe Based On Fiberglass Reinforced With Plastic Waste In-Plant Application System, Green Composite Manufacturing Technology, UTHM , 55, ISBN:9789672389859 |
| Noraini Marsi, Rupashinii Thana Singam, Chow Li Kien, Anika Zafiah Mohd Rus, Norfrizalidris Darlis, Shaiful Rizal Masrol and Ashari Kasmin (2020) Fabrication Process Of Palm Empty Fruit Brunches Reinforced With Box Waste Coated Super Hydrophobic For Shoe Pad Application, Green Composite Manufacturing Technology, UTHM , 45, ISBN:9789672389859 |
| Noraini Marsi, Muhammad Haikal Mohd Fodzi, Lingeshvaran Subramaniam, Bachik Abu Bakar and Md Zin Ibrahim (2020) Introduction Of The Composite Materials And Applications For Manufacturing Technology, Green Composite Manufacturing Technology, UTHM , 11, ISBN:9789672389859 |
| Noraini Marsi, Nur Athirah Huzaisham, Zuraidah Ithnain, Nor Mazlana Main, Mohd Nazrul Roslan, Muhammad Farid Shaari and Khairu Kamarudin (2020) Plastic Waste And Its Method Of Recycling, Green Composite Manufacturing Technology, UTHM , 23, ISBN:9789672389859 |
| Nor Mazlana Main, Mohd Hilmi Othman, Noraini Marsi, Yong Tze Mi, Mohd Faizal Esa, Yee Qui Fang (2020) Properties And Water Absorption Rate Of Paraffin Wax Coated Paperboard, Green Composite Manufacturing Technology, UTHM , 76, ISBN:9789672389859 |
| Shaiful Rizal Masrol, Syahmil Azim Ahmad Fauzi, Noraini Marsi, Khairu Kamarudin & Norrizal Mustafa (2020) Sound Absorption Characteristics Of Durian Husk Fibers Reinforced Polyurethane Composite, Green Composite Manufacturing Technology, UTHM , 88, ISBN:9789672389859 |
| Dalila Mohd Harun, Thamil Thenan, Nuranira Ahmad Nordin, Abd Latif Mohd Tobi, Saifulnizan Jamian, Noraini Marsi (2020) Study The Effect Of Sliding Frequency On Reciprocating Sliding Wear Test For Titanium Alloy Ti-6al-4v, Mechanical, Materials And Manufacturing Engineering, UTHM , 12, ISBN:9789672389569 |
| Nor Mazlana Main, Mohd Hilmi Othman, Tiang Ming Yuan, Noraini Marsi (2020) The Innovation Of Cotton Fiber From Recycled Cloth As Coloring Agent For Polypropylene Via Injection Moulding, Green Composite Manufacturing Technology, UTHM , 36, ISBN:9789672389859 |
| Noraini Marsi, Sum Man Kent, Anika Zafiah Mohd Rus, Dalila Mohd Harun, Nurhafizzah Hassan, Rohani Rahmad and Rahmah Mahmudin (2020) Utilization Of Garcinia Mangostana Dyes For Superhydrophobic On Cotton Textile Application, Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 28, ISBN:9789672389613 |
| Nur Athirah Huzaisham, Noraini Marsi, Anika Zafiah Mohd Rus, Amir Khalid, Azrin Hani Abdul Rashid, Rupashinii Thana Singam and Muhammad Haikal Mohd Fodzi (2019) A Review: Types And Characterization Of Bio-Green Plastics, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 1, ISBN:9789672306740 |
| Salwa Mahmood, Noraini Marsi, Tengku Nur Azila Raja Mamat, Nofrizalidris Darlis (2019) Assessment Of Ergonomic Risk Factors On Workers Repetitive Tasks At Poultry Feed Industries, Advance Technology Centre: Research And Innovation Series 3, UTHM , 61, ISBN:9789672306603 |
| Rupashinii Thana Singam, Noraini Marsi, Anika Zafiah Mohd Rus, Salwa Mahmood, Amir Khalid, Norrizal Mustaffa, Dalila Mohd Harun, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2019) Chapter 2: Utilization Of Natural Resources Processing For Bio-Green Bag In Packaging Application, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 10, ISBN:9789672306740 |
| Muhammad Faiz Osman, Mohamad Naeim Samsuddin, Amir Khalid, Izuan Amin Ishak, Noraini Marsi, Azwan Sapit, Akmal Nizam Mohammed (2019) Investigation Of The Spark Plug Characteristics On Ignition Process, Flame Development And Image Processing, Fuel, Automotive And Engine Technology Series 2 , UTHM , 89, ISBN:9789672306351 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi, Anika Zafiah Mohd Rus, Amir Khalis, Rosniza Hussin@Isa, Mohd Nazrul Roslan, Shaiful Rizal Masrol, Nur Athirah Huzaisham and Rupashinii Thana Singam (2019) Performances Of Bio-Green Bag Based Orange Peel With Epoxy-Matrix Processing In Packaging Application, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 70, ISBN:9789672306740 |
| Nur Athirah Huzaisham, Noraini Marsi, Norrizal Mustaffa, Nor Mazlana Main, Siti Hana Nasir, Siti Aida Ibrahim, Amir Khalid, Rupashinii Thana Singam and Muhammad Haikal Mohd Fodzi (2019) Physical And Mechanical Properties Of Bio-Green Bag Derived From Banana Peel, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 58, ISBN:9789672306740 |
| Nur Athirah Huzaisham, Noraini Marsi, Anika Zafiah Mohd Rus, Amir Khalid, Nik Normunira Mat Hassan, Nor Mazlana Main, Dalila Mohd Harun, Rupashinii Thana Singam and Muhammad Haikal Mohd Fodzi (2019) Production And Processing Bio-Green Bag Derived From Banana Peel, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 34, ISBN:9789672306740 |
| Noraini Marsi, Fatin Nadiah Mat Jais, Anika Zafiah Mohd Rus, Salwa Mahmood, Azrin Hani Abdul Rashid, Nor Mazlana Main, Rupashinii Thana Singam, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2019) The Effects Of Lawsonia Inermis Pigmentation For Superhydrophobic Properties As Green Technology On Cotton Fabrics, Green Chemistry Towards Wastewater Treatment And Remediation (Series 1), UTHM , 96, ISBN:9789672306979 |
| Azrin Hani Abdul Rashid, Noraini Masri, Md. Saidin Wahab, Mohd Faizal Esa and Bachik Abu Bakar (2017) Co-Kev Protective Panel: A High Impact Resistance Panel (Product Development Grant), Advanced Technology Centre: Research And Innovation Series 1, UTHM , 123, ISBN:9789672110101 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Azrin Hani Abd Rashid, Nurasyikin Misdan, Bachik Abu Bakar and Dalila Mohd Harun (2017) The Formulation And Synthesis Of Superhydrophobic Coating Based On Coconut Oil Reinforcing Natural Pigment For Self-Cleaning And Protective Nano-Coating, Advanced Technology Centre: Research And Innovation Series 1, UTHM , 107, ISBN:9789672110101 |
| General Publications |
| Yong Tze Mi, Dalila Mohd Harun, Rais Hanizam Madon, Md Zin Ibrahim, Nurasyikin Misdan, Siti Aida Ibrahim, Noraini Marsi, Mohd Fuad Yasak, Shaiful Rizal Masrol, Mohd Nazrin Ya`akof & Nurhayani Ujurmudi (2021) Bnj 27301 Engineering Laboratory Ii, UTHM , 1, ISBN:- |
| Amran Mohd Zaid, Suraya Hani Adnan, Azrin Hani Abdul Rashid, Nur Hanis Hayati Hairom, Aimi Syamimi Ab Ghafar, Peniel Ang Soon Ern, Sim Sy Yi, Mazatusziha Ahmad, Mimi Suliza Muhamad, Joe Prasetijo, Mohammad Ashraf Abdul Rahman, Noraini Marsi, Ili Najaa Aimi Mohd Nordin, Amir Khalid and Abdul Mutalib Leman (2019) E-Dairi Atc Advanced Technology Centre Bil. 1/2019, UTHM , 1, ISBN:- |
| Rohani Rahmad, Nor Afzanizam Samiran, Noraini Marsi, Mohd Nazrin Ya'akof (2018) Mechanics Machines Laboratory : Belt Friction, UTHM , 1, ISBN:- |
| Rahmad, R., Samiran, N.A.,Marsi, N.,, Ya'akof, M.N. (2018) Mechanics Machines Laboratory : Centrifugal Force Balancing , UTHM , 15, ISBN:- |
| Rahmad, R., Samiran, N.A.,Marsi, N., Ya'akof, M.N. (2018) Mechanics Machines Laboratory : Gear Efficiency, UTHM , 34, ISBN:- |
| Dr. Roslinda Ali, Dr. Peniel Ang Soon Ern, Pn. Kamarul Aini Mohd Sari, Pn. Khazanah A.Rahman, En. Mohd Fadly bin Abdul Razak, En. Maizul Ishak, Pn. Azlina Bahari, En. Norrizal Mustaffa, Pn. Dalila Mohd Harun, Dr. Noraini Marsi, En. Ashari Kasmin, En Muharam Rafidi Jaafar, Dr. Mazatusziha Ahmad, Prof Madya Dr. Ishak Baba, Prof Madya Hj. Amran Mohd Zaid (2016) Garis Panduan Latihan Industri Bagi Fakulti Teknologi Kejuruteraan, Universiti Tun Hussein Onn Malaysia., UTHM , 1, ISBN:- |
| Roslinda Ali, Dr. Penial Ang Soon Ern, Pn. Kamarul Aini Mohd Sari, Pn. Khazanah A.Rahman, En. Fadly Abdul Razak, En. Maizul Ishak, Pn. Azlina Bahari, En. Norrizal Mustaffa, Pn. Dalila Mohd Harun, En. Muharam Rafidi Jaafar, En. Ashari Kasmin, Dr. Noraini Marsi, Dr. Mazatusziha Ahmad, Prof Madya Hj. Amran Mohd Zaid, Prof Madya Dr, Ishak Baba (2016) Pembangunan Rubrik Penyeliaan Latihan Industri Ftk, UTHM , 1, ISBN:- |
| Journal |
| Roslinda Ali, Sharon Ting Shu Sze & Noraini Marsi (2023) A Comparative Study Between Conventional Concrete And Concrete Made From Plastic Waste By Using Solidworks Software, JOURNAL OF ADVANCED INDUSTRIAL TECHNOLOGY AND APPLICATION, UTHM , 12, 38, ISSN:27197097 |
| Aida Atiqah Atil, Nik Normunira Mat Hassan, Adyla Illyana Roseli, Fatimah Mohamed Yusop, Anika Zafiah Mohd Rus, Noraini Marsi, Tuan Noor Hasanah Tuan Ismail, Nur Faezah Yahya, Abdul Mutalib Leman (2023) Effect Of Buoyancy, Compressive Strength, And Shear Strength Of Polyurethane-Clay Composite (Pu-Cc) Doped With Polyurethane Filler Waste In Soft Clay Application, JOURNAL OF ADVANCED RESEARCH IN APPLIED SCIENCES AND ENGINEERING TECHNOLOGY, PENERBIT AKADEMIA BARU , 8, 106, ISSN:24621943 |
| Nurulsaidatulsyida Sulong , Anika Zafiah Mohd Rus, Najibah Ab Latif, Nor?Aini Wahab, Afian Omar, Nurul Syamimi Mohd Salim, Nik Normunira Mat Hassan, Noraini Marsi, Egi Agustian (2023) Photodegradation Mechanism Of Biopolymer Blended With High Density Polyethylene (Hdpe), JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, UITM , 3, 1, ISSN:22897895 |
| Aida Atiqah Atil, Nik Normunira Mat Hassan, Adyla Illyana Roseli, Fatimah Mohamed Yusop, Anika Zafiah Mohd Rus, Noraini Marsi, Tuan Noor Hasanah Tuan Ismail and Nur Faezah Yahya (2023) Physical Characterization Of Polyurethane-Clay Composite Doped With Treated And Untreated Pu Waste As Filler For Subgrade Layer Applications, MALAYSIAN CONSTRUCTION RESEARCH JOURNAL, CONSTRUCTION RESEARCH INSTITUTE OF MALAYSIA (CREAM) , 4, 29, ISSN:25904140 |
| Efil Yusrianto, Noraini Marsi, Noraniah Kassim, Izzati Abdul Manaf and Hafizuddin Hakim Shariff (2022) Acoustic Properties Of Autoclaved Aerated Concrete (Aac) Based On Gypsum-Ceramic Waste (Gcw), INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 67, ISSN:2229838X |
| Izzati Abdul Manaf, Noraini Marsi, Efil Yusrianto, Muhammad Hafifi Daniel Salamat, Noraniah Kassim, Mariah Awang, Hafizuddin Hakim Shariff, Mohd Ridzuan Mohd Jamir and Roslinda Ali (2022) Evaluation Of Physical Properties Of Autoclaved Aerated Concrete (Aac) Based Glass-Gypsum Waste Into Concrete, MALAYSIAN JOURNAL OF CHEMICAL ENGINEERING & TECHNOLOGY, MOHE , 4, 1, ISSN:26828588 |
| Izzati Abdul Manaf, Noraini Marsi, Hafizuddin Hakim Shariff and Noraniah Kassim (2022) Influence Of Recycled Glass Ceramic Waste On Physical And Mechanical Properties Of Foamed Concrete, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 55, ISSN:2229838X |
| Solomon Ugichukwe, M.J.M. Ridzuan, M.S. Abdul Majis, E.M. Cheng, Z. M. Razlan, Noraini Marsi (2021) Effect Of Thermal Ageing On The Scratch Resistance Of Natural-Fiber-Reinforced Epoxy Composites, COMPOSITE TRUCTURES, ELSEVIER , 4, 1, ISSN:02638223 |
| Aida Atiqah Atil , Nik Normunira Mat Hassan , Fatimah Mohamed Yusop , Anika Zafiah M. Rus , Abdul Mutalib Leman , Noraini Marsi and Nor Afzanizam Samiran (2021) Preliminary Study On Different Materials Of Geogrid By Using Finite Element Model, JOURNAL OF PHYSICS: CONFERENCE SERIES, UTHM , 12, 1, ISSN:17426596 |
| Rupashinii Thana Singam, Noraini Marsi¿, Azrin Hani Abdul Rashid, Siti Hana Nasir, Siti Aida Ibrahim, Mohd Nazrul Roslan, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2020) A Review On Characteristics And Potential Applications Of Henna Leaves (Lawsonia Inermis), JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 3, 603, ISSN:15461955 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi¿, Anika Zafiah Mohd Rus, Mariah Awang, Athirah Huzaisham, and Rupashinii Thanasingam (2020) A Review On The Application Of The Solid Waste For Building Material, JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 3, 613, ISSN:15461955 |
| Noraini Marsi , Burhanuddin Yeop Majlis, Faisal Mohd- Yasin, Hafzaliza Erny Zainal Abidin and Azrul Azlan Hamzah (2020) A Review: Properties Of Silicon Carbide Materials In Mems Application, INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, UNIMAP , 12, 113, ISSN:19855761 |
| Nik Normunira Mat Hassan, Yasmin Yuriz, Nabilah Kassim, Anika Zafiah M. Rus,Tuan Noor Hasanah Tuan Ismail, Razlin Abd Rashid, Fatimah Mohamed Yusop, Noraini Marsi, Zuliazura Mohd Salleh, Nor Afzanizam Samiran (2020) A Study On Sound And Vibration Of Rigid Polyurethane Composite For Slab Railway Applications, INTERNATIONAL JOURNAL OF SOLID STATE TECHNOLOGY, SOLID STATE TECHNOLOGY , 10, 811, ISSN:0038111 |
| Roslinda binti Ali (2020) A Study On The Characteristics Of An Eco-Brick As A Replacement To The Conventional Brick, PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY, UTHM , 12, 22, ISSN:00000000 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi and Hafizuddin Hakim Shariff (2020) Analysis Of Epoxy Composite With Diapers Waste As Fillers: Relationship Of Density, Porosity And Sound Absorption Coefficient, INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY, IAEME PUBLICATION , 4, 137, ISSN:09766340 |
| Nur Athirah Huzaisham, Noraini Marsi, Anika Zafiah Muhd Rus, Shaiful Rizal Masrol, Salwa Mahmood, Nor Mazlana Main, Muhammad Haikal Mohd Fodzi, and Rupashinii A/P Thana Singam (2020) Application Of Waste Banana Peels For Wastewater Treatment: A Review, JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 3, 596, ISSN:15461955 |
| Seman, C.M.H.M.C, Marzuki, N.A, Darlis, N, Marsi, N, Salleh, Z.M, Ishak, I.A, Taib, I, Sukiman, S.L (2020) Comparison Of Hemodynamic Performances Between Commercial Available Stents Design On Stenosed Femoropopliteal Artery , CFD LETTERS, PENERBIT AKADEMIA BARU , 7, 17, ISSN:21801363 |
| Solomon Ugochukwu, M.J.M. Ridzuan, M.S. Abdul Majida, E.M. Cheng, A.Z. Ahmad Firdaus and Noraini Marsi (2020) Influence Of Distilled Water And Alkaline Solution On The Scratch Resistance Properties Of Napier Fibre Filled Epoxy (Nffe) Composites, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, SCIENCEDIRECT, ELSEVIER , 10, 1, ISSN:22387854 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi, Nur Athirah Huzaisham and Rupashinii Thana Singam (2020) Influence Of The Ratio On The Mechanical Properties Epoxy Resin Composite With Diapers Waste As Fillers For Partition Panel Application, TEST ENGINEERING & MANAGEMENT, THE MATTINGLEY PUBLISHING CO., INC , 4, 10141, ISSN:01934120 |
| Rupashinii Thana Singam, Noraini Marsi , Azrul Azlan Hamzah and Faisal Mohd Yasin (2020) Performances Of Organic Dyes For Textile Cotton Fabric, INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, UNIMAP , 12, 289, ISSN:19855761 |
| NUR ATHIRAH HUZAISHAM, NORAINI MARSI & HASRI MAMAT (2020) Physical Characterization Of Banana (Musa Paradisiaca) Peel Derived Bioplastic, INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH AND DEVELOPMENT (IJMPERD), TRANSTELLAR , 6, 85, ISSN:22496890 |
| Rupashinii Thana Singam, Noraini Marsi, Hasri Mamat, Anika Zafiah Mohd Rus, Siti Hana Nasir and Muhammad Farid Shaari (2020) Physical Properties Of Natural Dyes Based On Lawsonia Inermis, Azadiractha Indica And Curcuma Longa Coated With Superhydrphobic Coating For Textile Applications, INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), IAEME PUBLICATION , 4, 301, ISSN:09766340 |
| Noraini Marsi, Chow Li Kien, Juhari A Rani, Nor Mazlana Main, Mohd Ridzuan Mohd Jamir and Muhammad Farid Shaari (2020) Preparation And Performance Test Of Pefb Reinforced Box Waste Coated Superhydrophobic Coating For Shoe Sole Application, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 6, 210, ISSN:2229838X |
| SAMSUDDIN Ezatul Kamaliah, IBRAHIM Siti Aida* , MARSI Noraini and MD RUS Anika Zafiah (2020) Preparation Of Tio2 Decorated Eggshell Membrane For Photocatalytic Dye Degradation, MATERIALS SCIENCE FORUM, TRANS TECH PUBLICATIONS LTD , 9, 508, ISSN:16629752 |
| Salwa Mahmood, Syed Abd.Hafiz Syed Abdul Aziz, Mohd Zakwan Zulkifli, Noraini Marsi (2020) Rula And Reba Analysis On Work Postures: A Case Study At Poultry Feed Manufacturing Industry , JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE , AMERICAN SCIENTI¿C PUBLISHERS , 3, 755, ISSN:15461955 |
| Hafzaliza Erny Zainal Abidin, Poh Choon Ooi, Teck Yaw Tiong, Noraini Marsi, Abrar Ismardi, Mimiwaty Mohd Noor, Nik Amni Fathi, Nik Zaini Fathia, Norazreen Abd Aziz, Siti Kudnie Saharie, Gandi Sugandi, Jumril Yunas, Chang Fu Dee, Burhanuddin Yeop Majlis and Azrul Azlan Hamzaha (2020) Stress And Deformation Of Optimally Shaped Silicon Microneedles For Transdermal Drug Delivery, JOURNAL OF PHARMACEUTICAL SCIENCES, ELSEVIER , 5, 1, ISSN:00223549 |
| Noraniah Kassim , Noraini Marsi, Nursyuhada Mohd Johari, Muhammad Haikal Mohd Fodzi (2020) The Characterization Of Hdpe Plastic Waste Producing Polyurethane Foams (Pufs), INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 10, 139, ISSN:23473983 |
| Lai Zhee Yen, Siti Hana Nasir, Nur Athirah Huzaisham, Salwa Mahmood, Noraini Marsi, Azrin Hani Abdul Rashid, Helmy Mustafa El Bakri and Mohd Iqbal Misnon (2020) The Influence Of Physical Properties On Comfort Performance Of Bedsheet Fabrics , INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), IAEME PUBLICATION , 11, 1018, ISSN:09766499 |
| Noraini Marsi, Nur Athirah Huzaisham, Anika Zafiah Mohd Rus, Thineshnaidu Lecthumanan, Salwa Mahmood, Shaiful Rizal Masrol, Azrin Hani Abdul Rashid, Muhammad Haikal Mohd Fodzi and Rupashinii Thana Singam (2020) The Mechanical Performance Of Tile Based On Plastic Waste (Pw) Mixed Wood Waste (Mww), JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 3, 795, ISSN:15461955 |
| Nik Normunira Mat Hassan, Razlin Abd Rashid, Tuan Noor Hasanah Tuan Ismail, Fatimah Mohamed Yusop, Noraini Marsi (2020) Transmission Loss Of Rigid Polyurethane Composite For Insulation Applications, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, UTHM , 9, 227, ISSN:2278309 |
| Nur Athirah Huzaisham and Noraini Marsi (2020) Utilization Of Banana (Musa Paradisiaca) Peel As Bioplastic For Planting Bag Application, INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), IAEME PUBLICATION , 4, 108, ISSN:09766340 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi, Chow Li Kien & Anika Zafiah Mohd Rus (2020) Utilization Of Pefb Reinforced Box Waste Coated Super-Hydrophobic Coating For Shoe Sole Applications, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WARSE , 3, 461, ISSN:22783091 |
| Noraini Marsi, Nur Athirah Huzaisham, Azrul Azlan Hamzah, Atiqah Zafirah Zainudin, Anika Zafiah Mohd Rus, Abdul Mutalib Leman,Rohani Rahmad,Salwa Mahmood, Azrin Hani Abdul Rashid,Dalila Mohd Harun and Nofrizalidris Darlis (2019) Biodegradable Plastic Based On Orange Peel For Packaging Application, JOURNAL OF DESIGN FOR SUSTAINABLE AND ENVIRONMENT, FAZPUBLISHING , 10, 1, ISSN:26827441 |
| Siti Nor Hawanis Husain, Nur Aiman Abdul Razak, Azrin Hani Abdul Rashid, Musli Nizam Yahya, Nurul Zakiah Zamri Tan, Muhamad Farid Shaari, Salwa Mahmood, Noraini Marsi & Harris Mubashir Nohamad Isa (2019) Development Of Kenaf Nonwoven As Automotive Noise Absorption, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication Ltd , 6, 101, ISSN:16627482 |
| Noraini Marsi, Nur Athirah Huzaisham, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah, Faisal Mohd-Yasin, Mohd Hezri Mohd Lwi, Anika Zafiah Mohd Rus, Rohani Rahmad and Dalila Mohd Harun (2019) Graphene Composite Blueberries Based Pencil Lead Act As Superhydrophobic Coating On Plastic Surfaces For Solar Application, JOURNAL OF DESIGN FOR SUSTAINABLE AND ENVIRONMENT, FAZPUBLISHING , 10, 1, ISSN:26827441 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan, Salwa Mahmood, Nur Athirah Huzaisham and RupashiniiThana Singam (2019) Izod Impact Behaviour Of Polymer Composite Solid Waste Disposal With Epoxy-Matrix, TEST ENGINEERING & MANAGEMENT, THE MATTINGLEY PUBLISHING CO., INC. , 11, 607, ISSN:01934120 |
| Rupashinii Thana Singam, Noraini Marsi, Hasri Mamat, Anika Zafiah Mohd Rus, Nor Mazlana Main, Siti Aida Ibrahim, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2019) Preparation And Characterization On Natural Dyes Based On Neem, Henna And Turmeric For Dyeing On Cotton With Superhydrophobic Coating, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 137, ISSN:2229838X |
| Azrin Hani Abdul Rashid, Siti Nor Hafiza Mohamad, Khairani Nasir, Muhammad Farid Shaari, Mohd Nazrul Roslan, Noraini Marsi, Siti Hana Nasir, Mohd Faizal Esa, Salwa Mahmood (2019) Puncture Impact Performance Of Coir-Aramid/Epoxy Hybrid Composite: Effects Of Stacking Configurations, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, International Journal of Mechanical Engineering and Robotics Research , 5, 368, ISSN:22780149 |
| OI-KA JONG , NOR MAZLANA MAIN , AZRIN HANI ABDUL RASHID3, NORAINI MARSI and & SHAIFUL RIZAL MASROL5 (2019) Tensile Properties Of Areca Leaf Sheath (Als) Subjected To Flattening Process For Disposal Plate Making Application: Effect Of Thickness And Flattering Pressure, INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH ADN DEVELOPMENT , TRANSTELLER , 11, 21, ISSN:22496890 |
| Nur Athirah Huzaisham, Noraini Marsi, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan, Azrin Hani Abdul Rashid, Muhammad Haikal Mohd Fodzi and Rupashinii Thana Singam (2019) Tensile Strength Analysis Of Biodegradable Planting Bag Derived From Banana (Musa Paradisiaca) Peel, TEST ENGINEERING & MANAGEMENT, THE MATTINGLEY PUBLISHING CO., INC. , 12, 2815, ISSN:01934120 |
| Noraini Marsi, Rupashinii A/P Thana Singam, Anika Zafiah Mohd Rus, Siti Nur Najiha Nor Bahari, Bachik Abu Bakar, Dalila Mohd Harun, Nor Mazlana Main, Md Zin Ibrahim, Rosniza Hussin @ Isa, Nofrizalidris Darlis (2019) The Characterization Of Beetroot Pigment As Surface Coating, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WARSE , 11, 121, ISSN:22783091 |
| Noraini Marsi, Nur Athirah Huzaisham, Anika Zafiah Mohd Rus, Anis Nasuha Noor Azman, Ahmad Sawal Ithnin, Azrin Hani Abdul Rashid, Salwa Mahmood, Nurhafizzah Hassan and Rohani Rahmad (2019) The Effects Of Superhydrophobic Coating Based On Hylocereus Polyrhizus Pigment For Piping Surface, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WARSE , 11, 103, ISSN:22783091 |
| Khairani Nasir, Azrin Hani Abdul Rashid, Nurul Atikah Abd. Razak, Muhammad Farid Shaari, Mohd Nazrul Roslan, Shazarel Shamsudin, Mohd Shukri Ansar, Siti Nor Hawanis Husain, Syafiqah Dzulkefli, Noraini Marsi (2019) The Tensile Performance Of R-Pet Bottle String: Effects Of Different String Sizes And Cutting Axes, UNIVERSAL JOURNAL OF MECHANICAL ENGINEERING , HORIZON RESEARCH PUBLISHING , 12, 1, ISSN:23323361 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Salwa Mahmood, Azrin Hani Abdul Rashid, Rupashinii Thana Singam, Muhammad Haikal Mohd Fodzi, Nur Athirah Huzaisham (2019) Uv Exposure Of The Surface Coating Sustainable Polymer Composite, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WARSE , 11, 144, ISSN:22783091 |
| Nik Normunira Mat Hassan, Anika Zafiah Mohd Rus, Fatimah Mohamed Yusop, Noraini Marsi, Nurulsaidatulsyida Sulong, Bachik Abu Bakar, Razlin Abd Rashid & Nor Afzanizam Samiran (2018) Endurance Of Polymer Composite To Uv Irradiation, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, UiTM , 12, 520, ISSN:12345678 |
| Nik Normunira Mat Hassan, Anika Zafiah Mohd Rus, Noraini Marsi, Nurul Saidatulsyida Sulong, Zainon Sharmila Shamsudin (2018) Investigation Of Renewable Polymer Composite From Waste Oil Endurance To Uv Irradiation Exposure By Ftir Using And Uv Vis, JOURNAL OF MECHANICAL ENGINEERING, UiTM Malaysia , 4, 53, ISSN:18235514 |
| Anika Zafiah M. Rus (2018) Mechanical Properties Of Wood Polymer Composites (Wpcs) After Prolonged Ultra-Violet (Uv) Irradiation Exposure, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 258, ISSN:2227524X |
| Noraini Marsi, Tan Ka Seng, Anika Zafiah Mohd Rus, Azrin Hani Abdul Rashid and Nor Mazlana Main (2018) Natural Pigment Based On Orange Fruit For Superhydrophobic Dyeing In Cotton Knitted Textile Application, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), Engg Journals Publications , 10, 1, ISSN:23198613 |
| Nurulsaidatulsyida Sulong, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan & Noraini Marsi (2018) Spectroscopic Studies Of Oils And Its Synthesis Biopolymer, JOURNAL OF MECHANICAL ENGINEERING, UiTM , 2, 50, ISSN:18235514 |
| Nurulsaidatulsyida Sulong, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan, Noraini Marsi (2018) Spectroscopic Studies Of Oils And Its Synthesized Bio-Polymer, JOURNAL OF MECHANICAL ENGINEERING, Universiti Teknologi MARA , 2, 50, ISSN:18235514 |
| Anika Zafiah M. Rus (2018) Tensile Property Of Melt Mixing Co-Polypropylene With Waste Polymer At Different Composition Ratios, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 261, ISSN:2227524X |
| Anika Zafiah M. Rus (2018) Thermal Degradation Study Of Waste Polymer Matrix Polypropylene And Polyvinyl Chloride As Polymer Matrix Filled Rice Husk Decking Structure, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 266, ISSN:2227524X |
| Anika Zafiah M. Rus (2018) Waste Polymer Blended With Copolymer Polypropylene To Enhance Mechanical Properties Using Injection Moulding, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 1, ISSN:2227524X |
| N Marsi, A Z M Rus, (2017) The Effects Of Biopolymers Composite Based Waste Cooking Oil And Titanium Dioxide Fillers As Superhydrophobic Coatings, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing Ltd , 8, 1, ISSN:1757-899X |
| Noraini Marsi, Anika Zafiah Mohd Rus and Nurulsaidatulsyida Sulong (2017) Vibration Performances Of Lightweight Concrete Coated Biopolymer Based On Used Cooking Oil, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 4236, ISSN:18196608 |
| Noraini Marsi, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah and Faisal Mohd-Yasin (2015) A Mems Packaged Capacitive Pressure Sensor Employing 3c-Sic With Operating Temperature Of 500 C, MICROSYSTEM TECHNOLOGIES, Springer , 1, 9, ISSN:09467076 |
| Noraini Marsi, Burhanuddin Yeop Majliis, Azrul Azlan Hamzah and Faisal Mohd-Yasin (2015) Development Of High Temperature Resist Of 500 C Employing Silicon Carbide (3c-Sic) Based Mems Pressure Sensor, MICROSYSTEM TECHNOLOGIES, Springer , 2, 319, ISSN:09467076 |
| Marsi, N., Majlis, B.Y., Hamzah, A.A and Mohd-Yasin, F. (2015) Development Of High Temperature Resistant Of 500?C Employing Silicon Carbide (3c-Sic) Based Mems Pressure Sensor, MICROSYSTEM TECHNOLOGIES, Springer Verlag , 2, 319, ISSN:09467076 |
| Noraini Marsi, Burhanuddin Yeop Majlis, Azrul Azlann Hamzah and Faisal Mohd-Yasin (2015) High Reliability Of Mems Packaged Capacitive Pressure Sensor Employing 3c-Sic For High Temperature, ENERGY PROCEDIA, Elsevier , 4, 471, ISSN:18766102 |
| Noraini Marsi, Burhanuddin yeop Majlis, Azrul Azlan Hamzah and Faisal Mohd-Yasin (2015) The Fabrication Of Back Etching 3c-Sic-On-Si Diaphragm Employing Koh + Ipa In Mems Capacitive Pressure Sensor, MICROSYSTEM TECHNOLOGIES, Springer , 8, 1651, ISSN:09467076 |
| Noraini Marsi, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah and Faisal Mohd Yasin (2015) The Mechanical Characterization Of Bending Test For Mems Capacitive Pressure Snesor Based 3c-Sic In High Temperature, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications Ltd , 4, 602, ISSN:16627482 |
| Media Digital |
| Noraini Marsi and Siti Aida Ibrahim (2020) Bnj 27301 Engineering Lab Ii (Solid Mechanics): Bending Stress In A Beam, UTHM , ISBN:- |
| Noraini Marsi and Siti Aida Ibrahim (2020) Bnj 27301 Engineering Lab Ii (Solid Mechanics): Shearing Force In A Beam, UTHM , ISBN:- |
| Noraini Marsi (2020) Bnj 27301 Engineering Lab Ii (Solid Mechanics): Tensile Test, UTHM , ISBN:- |
| Noraini Marsi and Siti Aida Ibrahim (2020) Bnj 27301 Engineering Lab Ii (Solid Mechanics): Torsion Test, UTHM , ISBN:- |
| MIMI SULIZA MUHAMAD, NORAINI MARSI, LEE TE CHUAN (2020) Malaysia Technology Expo (Mte) 2020, UTHM , ISBN:- |
| Noraini Marsi (2020) Solid Mechanics Bnj20903: Chapter 1 Stress And Strain, UTHM , ISBN:- |
| Noraini Marsi (2020) Solid Mechanics Bnj20903: Chapter 2 Deformation And Bending, UTHM , ISBN:- |
| Noraini Marsi (2020) Solid Mechanics Bnj20903: Chapter 4 Thin Cylinder, UTHM , ISBN:- |
| Noraini Marsi (2020) Solid Mechanics Bnj20903: Chapter 5 Stress Transformation Equation, UTHM , ISBN:- |
| Noraini Marsi (2020) Solid Mechanics Bnj20903: Chapter 5 Stress Transformation Mohr'S Circle, UTHM , ISBN:- |
| NURDALILA BINTI SAJI, SIM SY YI, SITY AISHAH BINTI MANSUR, NORAINI BINTI MARSI, AIMI SYAMIMI BINTI AB GHAFAR, YONG TZE MI (2019) Risk Management And Assessment Video, YouTube , ISBN:- |
| Prosiding / Seminar |
| Esa, M.F., Main,N.M., Roslan, M.N., Marsi, N., Kamarudin, K., Jasmani, L. (2023) A Narrative Review: Bamboo Fiber As An Alternative For Pulp And Paper, SPRINGER LINK , 363, ISBN:9789811915765 |
| Nik Normunira Mat Hassan, Che Ismail Che Sulong, Fatimah Yusop, Mohd Syafiq Syazwan Mustafa, Abdul Mutalib Bin Leman, Nor Afzanizam Samiran, Noraini Marsi, Tengku Nur Azila Raja Mamat and Izuan Amin Ishak (2023) Effect Of Diameter Hole Tube Of Plate Fin Heat Exchanger By Using Solidworks, AIP CONFERENCE PROCEEDINGS , 040007-1, ISBN:9780735443228 |
| Efil Yusrianto, Noraini Marsi, Izzati Abdul Manaf, Hafizuddin Hakim Shariff and Noraniah Kassim (2023) Effects Of Compressive Strength And Young Modulus Of Gypsum-Ceramic Waste On Autoclaved Aerated Concrete (Gcw-Aac), AIP CONFERENCE PROCEEDINGS , 1, ISBN:15517616 |
| Noraini Marsi, Muhammad Haziq Danisy Mohd Hazmi, Izzati Abdul Manaf, Anika Zafiah Mohd Rus, Mohd Ridzuan Mohd Jamir, Muhammad Haizar Ngaa and Abdul Mutalib Leman (2023) Investigation On The Effects Of Biodegradability Of Tapioca Starch Doped Into Palm Oil To Produce Bioplastic, AIP PUBLISHING , 1, ISBN:9780735443228 |
| Muhammad Syazwan Aiman Hisham, Noraini binti Marsi (2023) The Study Of Recycled Low-Density Polyethylene Reinforced Polyurethane Foam For Vehicle Interior Roof Headliner, UTHM , 550, ISBN:27735303 |
| Anika Zafiah M. Rus, Hendi Saryanto, Nurul Syamimi Mohd Salim, Hanani Abd Wahab, Noraini Marsi, Nik Normunira Mat Hassan, Siti Aida Ibrahim, Nurulsaidatulsyida Sulong (2023) Waste Cooking Oils In Biodegradable Polymer Conversion Process, SPRINGER NATURE , 1, ISBN:9789464631340 |
| Lim Mei Chien, Roslinda Ali & Noraini Marsi (2022) A Comparison Of Properties Between Eco-Brick And Lightweight Brick By Using Solidworks Software, UTHM , 104, ISBN:27735303 |
| MOHD FAIZAL ESA, NOR MAZLANA MAIN, MOHD NAZRUL ROSLAN, NORAINI MARSI, KHAIRU KAMARUDDIN, LATIFAH JASMANI (2022) A Narrative Review: Bamboo Fiber As An Alternative Source For Pulp And Paper, SPRINGERLINK , 363, ISBN:9789811915765 |
| Izzati Abdul Manaf, Noraini Marsi and Efil Yusrianto (2022) A Review On The Effects Of Ceramic Waste Into Concrete Composition, UTEM PRESS & CENTER FOR RESEARCH AND INNOVATION MANAGEMENT (CRIM) , 223, ISBN:29484413 |
| Noraini Marsi, Erra Saffirra, Anika Zafiah Mohd Rus , Abdul Mutalib Leman , Salwa Mahmood and Mohd Ridzuan Mohd Jamir (2022) Thickness Measurement And Bursting Strength Analysis Of Geotextiles From Ldpe Plastic Waste, UTEM PRESS & CENTER FOR RESEARCH AND INNOVATION MANAGEMENT (CRIM) , 225, ISBN:29484413 |
| Noraini Marsi and Mohmad Sahril Bin Md Sah (2022) Utilization Of Insulation Foam Based On Hdpe Plastic Waste As Sound Absorption Properties, UTEM PRESS & CENTER FOR RESEARCH AND INNOVATION MANAGEMENT (CRIM) , 227, ISBN:29484413 |
| T.N. Tuan Rohadi , M.J.M. Ridzuan, M.S. Abdul Majid , E.M. Cheng2, M.J. Norasni and Noraini Marsi (2021) A Comparative Study On Chitosan/Gelatin Composite Films With Incorporated Pith And Cortex Of Napier Grass, IOP PUBLISHING , 1, ISBN:17426596 |
| Syed Abdul Hafiz Wan Daud, Roslinda Ali & Noraini Marsi (2021) A Study On Development Of A Concrete Brick Using Plastic Pet Bottles As Fine Aggregrates Using Solidworks Software, UTHM , 97, ISBN:27735303 |
| Noraniah Kassim, Hafsa Mohammad Noor , Noraini Marsi , Mohamad Farhan Mohamad Huzairi , Muhammad Ilyas Zakaria , Muhammad Naiem Waros (2021) Alat Penyandar Belakang Mudah Alih Untuk Pesakit, UNIVERSITI TUN HUSSEIN ONN MALAYSIA , 132, ISBN:27734773 |
| Mohamad Mohshein Hashim, Noraini Marsi, Thineshnaidu Lecthumanan, Anika Zafiah Mohd Rus, Mohd Ridzuan Mohd Jamir and Norhafizzah Hassan (2021) Bending Strength Analysis Of Hdpe Plastic Reinforced Wood Waste And Thermoplastic Polymer To Replace Ceramic Tile Composites, IOP PUBLISHING , 1, ISBN:17426596 |
| Muhammad Yazid Rahman and Noraini Marsi (2021) Characterization Of Foam Materials Based On Hdpe Plastic Waste For Automotive Seat Application, UTHM , 703, ISBN:9789672817109 |
| Izzati Abdul Manaf, Noraini Marsi, Vikneshvaran Genesan, Efil Yusrianto, Hafizuddin Hakim Shariff, Suraya Hani Adnan, Mariah Awang, Roslinda Ali and Mohd Ridzuan Mohd Jamir (2021) Compressive Strength, Sound Absorption Coefficient (Sac) And Water Absorption Analysis Of Hdpe Plastic Waste Reinforced Polystyrene And Portland Cement For Lightweight Concrete (Lwc), IOP PUBLISHING , 1, ISBN:17426596 |
| Awang M., Idris M.L.H., Ja¿afar A.B., Marsi N., Fodzi M.H.M., Musa K., Ahmad F., Syafiq Syazwan M.M., Yusop F., Jumali A.A. (2021) Develop Interlocking Concrete Block Pavement From Portland Cement, Polystyrene And Bottom Ash On Pedestrian Road, SPRINGER SCIENCE AND BUSINESS MEDIA DEUTSCHLAND GMBH , 67, ISBN:9789811607417 |
| A Alzomor, A Z M Rus, H A Wahab, N S M Salim, N Marsi, M A Zulhakimie and M M Farid (2021) Dynamic Mechanical Analysis And Morphology Of Petroleum-Based And Bioepoxy Foams With Wood Filler, AIP PUBLISHER , 020042-1, ISBN:9780735440913 |
| Suhadir Shamsuddin, Suhairi Ismail, Noraini Marsi, Zulkarnain Md Amin, Nur Aisyah Abdul Halim Lim, Aini Syahirah Md Khirom, Mohd Nazrin Musling (2021) Strategi Pendaftaran Pelajar Berdasarkan Norma Baharu Di Kolej Kediaman Pagoh, UNIVERSITI UTARA MALAYSIA , 268, ISBN:9789672644415 |
| T.N. Tuan Rohadi , M.J.M. Ridzuan, M.S. Abdul Majid , E.M. Cheng2, M.J. Norasni and Noraini Marsi (2021) Swelling Behaviors Of Composite Film With Alternating Fibre Reinforcement And Aqueous Media., IOP PUBLISHING , 1, ISBN:17426596 |
| Erra Saffirra Sahrel and Noraini Marsi (2021) The Study Of Characterization Of Eco-Friendly Geotextile Based On Low-Density Polyethylene (Ldpe) Plastic Waste, UTHM , 831, ISBN:27735303 |
| Roslinda Ali, Noraini Marsi, Nur Fatin Izzaty Mustafa Kamal, Mimi Suliza Muhamad, Norshuhaila Mohamed Sunar, Hasnida Harun, Hazren A. Hamid, Nuramidah Hamidon (2020) A Study On The Characteristics Of An Eco-Brick As A Replacement To The Conventional Brick, UTHM , 22, ISBN:27735303 |
| Noraini Marsi, Lingeshavaran Subramaniam , Anika Zafiah Mohd Rus , Nurulsaidatulsyida Sulong , Muhammad Haikal Mohd Fodzi , Nur Athirah Huzaisham , Nik Alnur Auli Nik Yusuf , Salwa Mahmood , Muhammad Farid Shaari and Hafizuddin Hakim Shariff (2020) The Mechanical Performance Of Pipe Based On Fiberglass Reinforced With Plastic Waste (Frpw) Composites , IOPSCIENCE , 1, ISBN:17578981 |
| Nur Athirah Huzaisham, Noraini Marsi, Muhammad Haikal Mohd Fodzi and Rupashinii Thana Singam (2019) Application Of Waste Banana Peels As Biodegradable Plastic, READERSINSIGHT , 128, ISBN:26639467 |
| Salwa Mahmood,Syed Abd. Hafiz Syed Abdul Aziz, Noraini Marsi, Mohd Zakwan Zulkifli (2019) Posture Assessment For Workers Repetitive Tasks At Poultry Feed Manufacturing Industry, READERS INSIGHT PUBLISHER , 28, ISBN:26639167 |
| Muhammad Haikal Mohd Fodzi, Noraini Marsi, Nur Athirah Huzaisham and Rupashinii Thana Singam (2019) The Physical Properties Of Disposable Diapers Waste As Partition Wall Panel In Building Material, READERSINSIGHT , 150, ISBN:26639467 |
| Rupashinii Thana Singam, Noraini Marsi, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2019) The Usage Of Henna Leaves (Lawsonia Inermis) For Dyeing In Cotton, SCIENCE PROCEEDINGS SERIES (SPS) , 23, ISBN:12345678 |
| NORAINI MARSI, ANIKA ZAFIAH MOHD RUS AND NUR AQILLAH MOHD SHAMSUDDIN TAN (2017) The Effects Of Curcuma Longa On The Functionality Of Pigmentation For Thin Film Coating, IOP PUBLISHING , 1, ISBN:17578981 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Mohd Razali Ibrahim, Syahir Arif Samsuddin, and Azrin Hani Abdul Rashid (2017) The Synthesis And Surface Properties Of Newly Eco-Resin Based Coconut Oil For Superhydrophobic Coating , KEY ENGINEERING MATERIALS , 59, ISBN:9783035711585 |
| A.R Azrin Hani, M.N Roslan, N. Marsi, N.S Azman, R. Ahmad, M. Mariatti (2016) Ballistic Impact Response Of Woven Hybrid Coir/Kevlar Laminated Composites, EDP Sciences , 1 , ISBN:2261236X |
| Noraini Marsi, Burhanuddin Yeop Majlis, Faisal Mohd-Yasin, Azrul Azlan Hamzah, Anika Zafiah Mohd Rus (2016) Protek Psb As Biotechnologies Photosensitive Protection Mask On 3c-Sic-On-Si In Mems Sensor, IOPSCIENCE Publishing , 1 , ISBN:1757899x |
| Noraini Marsi, Burhanuddin Yeop Majlis, Faisal Mohd-Yasin, Azrul Azlan Hamzah, Anika Zafiah Mohd Rus (2016) Thermal Hysteresis Of Mems Packaged Capacitive Pressure Sensor (Cps) Based 3c-Sic, IOPSCIENCE , 1 , ISBN:1757899x |
| Noraini Marsi, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah, Faisal Mohd-Yasin (2015) 3c-Sic-On-Si Based Mems Packaged Capacitive Pressure Sensor Operating Up To 500 ?C And 5 Mpa, IEEE |
| Hafzaliza Erny Zainal Abidin, Azrul Azlan Hamzah, Mohd Ambri Mohamed, Noraini Marsi (2015) Electrical Performances Based On Two Different Structured Of Micro Supercapacitor Electrodes, IEEE |
| Marsi, N., Majlis, B. Y., Hamzah, A. A., Abidin, U., Mohd-Yasin, F. (2014) Development Of A Silicon Carbide Mems Capacitive Pressure Sensor Operating At 500c, IEEE , ISBN:.9781479957606 |
| Noraini Marsi, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah and Faisal Mohd-Yasin (2014) Thermal Hysteresis Of Mems Packaged Cps Based 3c-Sic, UTHM |
| Noraini Marsi, Burhanuddin Yeop Majlis, Faisal Mohd-Yasin and Azrul Azlan Hamzah (2012) Comparison Of Mechanical Deflection And Maximum Stress Of 3c-Sic- And Si-Based Pressure Sensor Diaphragms For Extreme Environment, IEEE Malaysia , ISBN:97814673233956 |
| Noraini Marsi, Burhanuddin Yeop Majlis, Azrul Azlan Hamzah, Faisal Mohd-Yasin (2012) Design Of Silicon Carbide (Sic) Capacitive Pressure Sensor Diaphragm, Universiti Malaysia Pahang (UMP) |
| Noraini Marsi, Burhanuddin Yeop Majlis, Faisal Mohd-Yasin and Azrul Azlan Hamzah (2012) The Capacitance And Temperature Effects Of The Sic- And Si- Based Mems Pressure Sensor, UKM |
| Noraini Binti Marsi (2010) Influence On Contact Angle Property Of Low Loading Superhydrophobic Metal Oxide Filler Filled Polymer Composite Surface Coating |
| Noraini Binti Marsi (2010) Role Of Photocatalysis For Bio-Epoxy Composite As Surface Coating |
| Noraini Binti Marsi (2010) Study Of Waste Cooking Oil Bio-Polymer Composites (Top) As Surface Coating On Lightweight Roof Tile (Lrt) |
PROFESSIONAL CONSULTATION
| ID/CODE | PROJECT | CLIENT | START DATE | END DATE |
|---|---|---|---|---|
| P253 | Perundingan Penggunaan Makmal bagi Subjek Sains Bahan, Pejabat Pengurusan Makmal UTHM ? Kampus Cawangan Pagoh (PPMKCP) oleh Pelajar Program Teknologi Kimpalan Kolej Vokasional Muar 2024 | Kolej Vokasional Muar | 28/02/2024 | 28/02/2024 |
| P254 | Penggunaan Makmal bagi Subjek Sains Bahan, Pejabat Pengurusan Makmal UTHM ? Kampus Cawangan Pagoh (PPMKCP) oleh Pelajar Program Teknologi Pembinaan Kolej Vokasional Muar 2024 | Kolej Vokasional Muar | 28/02/2024 | 28/02/2024 |
| P252 | Perundingan bagi Kursus Sains Bahan kepada pelajar Program (Pemesinan Industri, Teknologi Kimpalan & Teknologi Pembinaan) Kolej Vokasional Segamat, Johor | Kolej Vokasional Segamat | 26/02/2024 | 26/02/2024 |
| P251 | Perundingan bagi kuliah Gambarajah Rajah Fasa (Phase Diagram) serta amali Ujian Tegangan dan Ujian Kekerasan bagi Modul Sains Bahan (USM 2112) kepada pelajar Program (Pemesinan Industri, Teknologi Kimpalan & Teknologi Pembinaan) Kolej Vokasional Batu Pahat, Johor | Kolej Vokasional Batu Pahat | 14/02/2024 | 14/02/2024 |
| P233 | Conduct the investigation of airflow, temperature, and humidity with treated MEV14 and MEV8 filters in wardroom ducting system. | Zumendar Resources | 01/10/2023 | 31/12/2023 |
| P206 | Penggunaan Makmal bagi Subjek Sains Bahan, Pejabat Pengurusan Makmal UTHM ? Kampus Cawangan Pagoh (PPMKCP) oleh Pelajar Program Teknologi Pembinaan Kolej Vokasional Muar | Kolej Vokasional Muar | 12/04/2023 | 13/04/2023 |
| P203 | Perkhidmatan Kursus Sains Bahan (Amali Ujian Ketegangan & Ujian Kekerasan untuk Diploma Kolej Vokasional Segamat | Kolej Vokasional Segamat | 09/04/2023 | 10/04/2023 |
| P202 | Penggunaan Makmal Bagi Ujian Tegangan Dan Ujian Kekerasan, Pejabat Pengurusan Makmal Uthm ? Kampus Cawangan Pagoh (Ppmkcp) Oleh Pelajar Program Teknologi Kimpalan, Program Pemesinan Industri Dan Program Teknologi Pembinaan, Kolej Vokasional Batu Pahat | Kolej Vokasional Batu Pahat | 20/03/2023 | 20/03/2023 |
| P200 | Penggunaan Makmal bagi Subjek Sains Bahan, Pejabat Pengurusan Makmal UTHM ? Kampus Cawangan Pagoh (PPMKCP) oleh Pelajar Program Teknologi Kimpalan Kolej Vokasional Muar | Kolej Vokasional Muar | 08/03/2023 | 08/03/2023 |
| P201 | Penggunaan Makmal bagi Subjek Sains Bahan, Pejabat Pengurusan Makmal UTHM ? Kampus Cawangan Pagoh (PPMKCP) oleh Pelajar Program Teknologi Pemesinan Industri Kolej Vokasional Muar | Kolej Vokasional Muar | 08/03/2023 | 08/03/2023 |
| PS200 | The Study of the Effect of Different Functional Motorized Hydraulic System and Motorized Chain Syste | Kim Hoe Thye Industries Sdn Bhd | 01/12/2019 | 30/07/2020 |
| P150 | Penggunaan Makmal Sains Bahan FTK UTHM oleh Pelajar Dip. Tahun 2 Teknologi Pemesinan Industri & Tekn | Kolej Vokasional Muar | 01/08/2019 | 31/08/2019 |
CONSULTANCIES
| Year | Description | Level |
|---|---|---|
| 2023 | Project Supervisor/Teaching Training for Pelantikan sebagai Pegawai Perunding bagi Pelaksanaan Amali Sains Bahan (Ujian Ketegangan dan Ujian Kekerasan) untuk Pelajar Program Diploma Teknologi Pembinaan, Kolej Vokasional Muar, Johor, Kolej Vokasional Muar, Malaysia, February 2023 | District |
| 2023 | Member for Perunding bagi Projek Perundingan Conduct the Investigation of Airflow, Temperature, and Humidity with Treated MEV14 and MEV8 Filters in Wardroom Ducting System under Zumendar Resources, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 | Private |
| 2023 - 2025 | Committee Member for MoA di between Universiti Tun Hussein Onn Malaysia and Pusat Kecemerlangan Kejuruteraan dan Teknologi JKR (CREaTE), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 | University |
| 2023 | Invited Lecturer for Presenter Paper "Mechanical Analysis Palm Empty Fruit Bunches (PEFB) Reinforced Recycled LDPE for PEFB/LDPE Polymer Composite, WAWM ACADEMY & ALUMNI UNIMAP, Malaysia, November 2023 | National |
| 2023 | Invited Lecturer for Presenter Paper "Effects of Addition Glass Waste on the Strength and Sound Absorption Properties of Glass Waste Reinforced Foam Concrete (GW-FC) for Wall Applications" at 2nd International on Advanced Science and Engineering (ICASE 2023), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2023 | National |
| 2023 | Member for Participant in Innovation Poster category entitled Eco-Fiber Polymer Composites at International Symposium on Manufacturing, Automotive & Design (ISMAD 2023) in conjuction with TVET HUB & INDUSTRY ENGAGEMENT: DIALOGUE, SYMPOSIUM & EXHIBITION (THIE 2023), Politeknik Sultan Azlan Shah, Perak, Malaysia, October 2023 | International |
| 2023 | Director, Program Related Center (PSH) for Pengarah Program bagi Program Seminar Persekitaran Ergonomik dan HIRARC di Tempat Kerja kepada Staf-Staf FTK, UTHM anjuran JKKP FTK, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2023 | University |
| 2023 | Invited Lecturer for Presenter Paper Research - Manufacturing "Utilization of Rice Husk Fiber Blended Recycled Polyethylene (PET) for Manufacturing RHF/PET Polymer Composites di International Symposium Automotive, Manufacturing and Design (ISMAD 2023), Politeknik Sultan Azlan Shah, Perak, Malaysia, October 2023 | International |
| 2023 - 2028 | Committee Member for MOA di antara UTHM dan Bahagian Perancangan dan Penyelidikan Kebombaan, Jabatan Bomba dan Penyelamat Malaysia , Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023 | Goverment |
| 2023 - 2025 | Committee Member for MoA di antara UTHM dan GETFIT SOLUTIONS, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 | International |
| 2023 - 2025 | Committee Member for Pelantikan Ahli Jawatankuasa MoA antara UTHM dan CV Uncaria Herbal Indonesia, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 | International |
| 2023 - 2028 | Committee Member for Pelantikan Ahli Jawatankuasa Letter of Intent (LOI) antara UTHM dan SMK Sultan Abdul Jalil, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2023 | District |
| 2023 - 2025 | Committee Member for MOA di antara Universiti Tun Hussein Onn Malaysia (UTHM) dan Pusat Kecemerlangan Kejuruteraan dan Teknologi JKR (CREaTE), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 | Goverment |
| 2023 - 2027 | Committee Member for MOU di antara Universiti Tun Hussein Onn Malaysia (UTHM) dan Globallab Engineering Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 | University |
| 2023 - 2027 | Committee Member for Pelantikan Ahli Jawatankuasa MoU antara UTHM dan SWM Environment Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023 | Private |
| 2023 | External Assessor / External Reviewer for Reviewer Manuscript under 2nd International on Advanced Science and Engineering (ICASE 2023), WAWM ACADEMY & ALUMNI UNIMAP, Malaysia, November 2023 | National |
| 2023 | Programme Coordinator for Appointment Lead Consultant Fieldwork: Direct Fire Test of Autoclaved Aerated Concrete (AAC) based in Glass-Ceramic Industrial Waste, Kim Hoe Thye Industries Sdn Bhd, Malaysia, January 2023 | Private |
| 2023 | Project Supervisor/Teaching Training for Pelantikan Perunding bagi Projek Penggunaan Makmal Subjek Sains Bahan, PPMKCP oleh Pelajar Program Teknologi Kimpalan, Kolej Vokasional Muar, UTHM Holding, Malaysia, March 2023 | District |
| 2023 | Programme Coordinator for Appointment as Coordinator Internship Program under MY Flexitanks Industries Sdn Bhd Projects: Development of Municipal Solids Waste Polymer Composites (MPC's), My Flexitank Industries Sdn Bhd, Malaysia, February 2023 | Private |
| 2023 | PSH Project Consultant (Programme Development) for Projek Penggunaan Makmal bagi Ujian Tegangan dan Ujian Kekerasan, PPMKCP oleh Pelajar Program Teknologi Kimpalan, Program Kemesinan dan Program Teknologi Pembinaan, Kolej Vokasional Batu Pahat , UTHM Holding, Malaysia, March 2023 | District |
| 2022 | Evaluation Panel of Project/Student for Juri bagi Program Karnival Inovasi Kejuruteraan Mekanikal 2022 (i-MECa2022) Anjuran Jabatan Kejuruteraan Mekanikal, Pusat Pengajian Diploma, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2022 | University |
| 2022 - 2023 | Programme Coordinator for Felo Research Enhanced - Structured Internship Programme (RE-SIP) - Bintang Packaging Industries Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2022 | University |
| 2022 | Programme Coordinator for Coordinate Internship Program under MyFlexitank Industries Sdn Bhd. Title: Development of Municipal Solid Waste Polymer COmposite (MPC's), My Flexitank Industries Sdn Bhd, Malaysia, February 2022 | Private |
| 2022 | Supervisor for Pelajar Latihan Industri dibawah MYF, MyFlexitank Industries Sdn Bhd, Malaysia, February 2022 | Private |
| 2022 - 2023 | Member for Ahli MoA dibawah STMicroelectronics Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2022 | University |
| 2022 - 2023 | Programme Coordinator for Pelantikan Pegawai Penyelaras MoA dibawah STMicroelectronics, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2022 | University |
| 2022 - 2025 | Member for Ahli MoU dibawah Easy Clean & Services (M) Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2022 | University |
| 2022 | Chairperson of VIVA for Appointment as Chairperson of An Oral Examination (Mohammad Arafat), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2022 | University |
| 2022 - 2023 | Project Supervisor/Teaching Training for Pelantikan sebagai Felo RE-SIP di bawah Bintang Packaging Industries (M) Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2022 | University |
| 2022 - 2024 | Committee Member for Pelantikan Ahli Jawatankuasa MoA di antara UTHM dan DLariz Logik (M) Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2022 | Private |
| 2022 - 2023 | Programme Coordinator for Pelantikan Pegawai Penyelaras MoA di antara UTHM dan STMicroelectronics Sdn Bhd - Projek "Development of Permeable Pavement of HDPE Reinforced Resin Waste (Eco-Pave HDPE-Resin), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2022 | University |
| 2022 - 2023 | Committee Member for Pelantikan Ahli Jawatankuasa di bawah MoA antara UTHM dan STMicroelectronics Sdn Bhd - Projek "Development of an Alternative Ceiling Board from Waste Materials", Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2022 | Private |
| 2022 - 2024 | Member for Pelantikan Ahli MoA di bawah Dlariz Logik (M) Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2022 | University |
| 2022 - 2027 | Member for Pelantikan Ahli MoU dibawah SWM Environment Sdn Bhd, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2022 | University |
| 2021 | Invited Lecturer for Ketua Perunding: Research Cluster 3: Development of Municipal Solid Waste Polymer Composites, Angkasa Kowaris Plastics Sdn Bhd, Malaysia, April 2021 | Private |
| 2021 | Invited Lecturer for Ketua Perunding: Research Cluster 2: Utilization of Physical and Mechanical Properties of Municipal Solid Waste (MSW) Landfill Mining, Tekno RE Consulting Sdn Bhd, Malaysia, September2021 | Private |
| 2021 | Invited Lecturer for Pelantikan sebagai Ketua Perundingan dan Ketua Bahagian Pengujian dan Pengesahan serta Perunding Projek bagi Pembangunan Inovasi Hevea Smart Tools v1.0 (Pilot Testing & Validation), Ezfarissa Enterprise , Malaysia, January 2021 | Private |
| 2021 | Invited Lecturer for Pelantikan sebagai Ketua Perunding / Penguji dalam Projek Pengujian, UTHM COMMERCIAL SDN BHD, Malaysia, March 2021 | Private |
| 2021 - 2022 | Head of the Program for Utilization of Physical and Mechanical Properties of Municipal Solid Waste (MSW) Landfill Mining, Tekno-RE Consulting Sdn Bhd, Malaysia, September2021 | Private |
| 2021 | Industrial Adviser for Pelantikan sebagai Penasihat Industri Berkaitan Harta Intelek Pembangunan Inovasi Hevea Smart Tools v 1.0, Ezfarissa Enterprise, Malaysia, January 2021 | Private |
| 2018 - 2021 | Head for Elementary Technology Study Project (i) Energy consumption replacement research foe motor apppliances like vacuum cleaner and blender. (ii) Heat efficiency (iii) Noise reduction research, Panasonic Appliances R&D Centre Asia Pacific, Malaysia, September2018 | Private |
SUPERVISION
| Year | Description |
|---|---|
| 2024 | Co-supervisor for Tengku Muhammad Ibrahim Salahuddin Bin Tengku Ahmad, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Co-supervisor for Zamil Hisham Bin Abdul Rashid, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Azriel Iskandar Bin Abu Bakar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Mohamad Danial Adam Bin Mohamad Nazri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhamad Hazeeq Bin Jamil, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Amir Idham Bin Mustopha, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Hasif Bin Abdul Rahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Ifwatul Wafiy Bin Mohd Rosli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Imran Bin Noor Effendi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Syahrul Azhar Bin Mohd Sangit, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Industrial Training Supervisor for Ahmad Kamal Afiq Bin Ab Aziz, Technip Malaysia, 2024 |
| 2024 | Industrial Training Supervisor for Hirashnny A/P Satiyamurthy, North Soil Eng (M) Sdn Bhd, 2024 |
| 2024 | Industrial Training Supervisor for Josline John, Dyna Segmen Sdn Bhd, 2024 |
| 2024 | Industrial Training Supervisor for Mohamad Izzauddin Bin Ahmad, Hha Associates Sdn Bhd, 2024 |
| 2024 | Industrial Training Supervisor for Muhammad Aizuddin Bin Mohd Suhaimi, Mega Consult Sdn. Bhd., 2024 |
| 2024 | Industrial Training Supervisor for Muhammad Izzat Bin Jamil, Texas Instruments Malaysia Sdn Bhd, 2024 |
| 2024 | Industrial Training Supervisor for Nur Farah Athirah Binti Mohd Noh, Al Pine Utility Services Sdn Bhd , 2024 |
| 2024 | Industrial Training Supervisor for Sor Jun Kang, Hong Leong Yamaha Motor Sdn Bhd, 2024 |
| 2024 | Industrial Training Supervisor for Thivya A/P Tamilvanan, Ceebee Chemicals Sdn.Bhd., 2024 |
| 2024 | Main Supervisor for Mohamad Fikri Bin Mohamad Yunus, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Main Supervisor for Sharanya A/P Kumar, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Main Supervisor for Tharshini Bala A/P Bala Subramaniam, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Supervisor for Aizuddin Bin Sarifuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Supervisor for Muhamad Faauzan Azim Bin Mohd Failiz, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Supervisor for Muhammad Faiz Bin Mohd Sakri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2023 | Assessor / Reviewer for Panel Penilai Geran Penyelidikan TIER 1 Fasa 1 Tahun 2023 UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 |
| 2023 | Assessor / Reviewer for Panel Jawatankuasa Kesepakaran Jawatan Profesor Madya DS54 FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 |
| 2023 | Assessor / Reviewer for Panel Penemuduga Peserta "Career Week FTK" bagi Fakulti Teknologi Kejuruteraan 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 |
| 2023 | Assessor / Reviewer for Panel Penilai Geran Penyelidikan TIER 2 Fasa 1 Tahun 2023 UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023 |
| 2023 | Assessor / Reviewer for Panel Penilai Pembentangan Pre-Viva bagi Program Ijazah Sarjana Teknologi Kejuruteraan, FTK - Norul Ahsanah Aulia binti Mohamad Mahani, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023 |
| 2023 | Co-supervisor for Gul-E-Nayyab, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Co-supervisor for Ir. Ts. Muhamad Nazri Mohd Riffin, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Co-supervisor for Tasnim Binti Zakepeli, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Course Evaluator (Subject Matter Expert) for Panel bagi Bengkel Moderasi Projek Sarjana Muda 2 (PSM2) bagi Semester 2 Sesi 2022/2023, FTK, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2023 |
| 2023 | Course Evaluator (Subject Matter Expert) for Pelantikan Penilai Instrumen Soal Selidik bagi Tujuan Penyempurnaan Penyelidikan Kajian Sarjana Muda, Fakulti Teknologi Kejuruteraan, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023 |
| 2023 | Evaluation Panel of Project/Student for JUDGE FOR THE 11th MADE IN UNIKL 2023 (MIU 2023), Universiti Kuala Lumpur (UniKL), Malaysia, December 2023 |
| 2023 | Evaluation Panel of Project/Student for Karnival Inovasi CeDS 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2023 |
| 2023 | Evaluation Panel of Project/Student for Panel Mock Pitching bagi Pitching Session Petronas Academia Collaboration, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023 |
| 2023 | Examiner for Kharminee A/P Shanmugam Dass, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Kharminee A/P Shanmugam Dass, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Lingamoorthy A/L Ramachandran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Lingamoorthy A/L Ramachandran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Muhammad Amirul Bin Hisamuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Muhammad Amirul Bin Hisamuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Muhammad Irfan Bin Ruslan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Muhammad Irfan Bin Ruslan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Ryan Sim Zhang Yie, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Ryan Sim Zhang Yie, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Thesis Examiner for Master of Engineering Technology Adyla Illyana binti Roseli, Fakulti Teknologi Kejuruteraan, UTHM, Sept 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 |
| 2023 | Examiner for Wan Mohamad Syazwan Bin Wan Hasnor, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Wan Mohamad Syazwan Bin Wan Hasnor, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Faculty External Examiner for Panel Penilai FKAAB Innovation Week (InNow) 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2023 |
| 2023 | Industrial Training Supervisor for Aiman Hisyam Bin Saiful Bahri, My Flexitank Industries Sdn Bhd, 2023 |
| 2023 | Industrial Training Supervisor for Amirul Hafizi Bin Ahmad Sabri, Autokeen Sdn Bhd, 2023 |
| 2023 | Industrial Training Supervisor for Mohamad Amir Asyraf Bin Mohd Noor, Puncak Niaga Holdings Berhad, 2023 |
| 2023 | Industrial Training Supervisor for Mohamad Azizi Hakimi Bin Azhar, Autokeen Sdn Bhd, 2023 |
| 2023 | Industrial Training Supervisor for Mohamad Syafiq Bin Mohd Shahrudin, Autokeen Sdn Bhd, 2023 |
| 2023 | Industrial Training Supervisor for Muhammad Ammar Bin Zahari, Bintang Packaging Industries (M) Sdn Bhd, 2023 |
| 2023 | Industrial Training Supervisor for Nik Mohammad Mursyid Bin Mohd Rezman, Autokeen Sdn Bhd, 2023 |
| 2023 | Main Supervisor for Iylia Izzati Binti Jamal, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Main Supervisor for Izzah Aqilah Binti Ariffin, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Main Supervisor for Muhammad Qusyairi Bin Abdul Rahman, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Main Supervisor for Siti Aminah Binti Mansor, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Main Supervisor for Tan K Reen, MSc, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Mentor for Pelantikan Mentor bagi Program Mentor-Mentee Penerbitan Jurnal Berimpak Fakulti Teknologi Kejuruteraan 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023 |
| 2023 | Supervisor for Mathivaanan A/L Sukumaran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Supervisor for Mathivaanan A/L Sukumaran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Supervisor for Muhammad Syazwan Aiman Bin Hisham, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Supervisor for Sivanandhan A/L Subramaniam, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Supervisor for Sivanandhan A/L Subramaniam, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2022 | Co-Supervisor for Dev Darshan A/L G Visagan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Lim Han Yang, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Mohamad Aliff Afdhal Bin Mohamad Khalid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Mohamad Aliff Afdhal Bin Mohamad Khalid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Muhamad Syazwan Bin Saaidin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Muhamad Syazwan Bin Saaidin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Muhammad Ammar Bin Zahari, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Muhammad Ammar Bin Zahari, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-supervisor for Sharon Ting Shu Sze, MSc, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Lai Swee Yong, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Lai Swee Yong, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Muhammad Arif Bin Mat Nazeri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Muhammad Arif Bin Mat Nazeri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Nik Nur Amyra Adilla Binti Noor Khairullah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Nik Nur Amyra Adilla Binti Noor Khairullah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Sakthiraaj A/L Rajendran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Sakthiraaj A/L Rajendran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | External Examiner for Pelantikan sebagai Pemeriksa Luar Pelajar Sarjana Sains (Kejuruteraan Bioperubatan)- Anis Najwa binti Azahari, Fakulti Teknologi Kejuruteraan Elektronik, Universiti Malaysia Perlis., Universiti Malaysia Perlis, Malaysia, October 2022 |
| 2022 | Industrial Training Supervisor for Haziq Iskandar Bin Mohammad Fouad Iskandar, Bintang Packaging Industries (M) Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Mohamad Ryusdan Bin Mohamad Rozali, Bintang Packaging Industries (M) Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Mohd Fadzli Hakimi Bin Mohd Faizul, My Flexitank Industries Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Muhammad Afiq Zulhelmi Bin Karim, Dominant Opto Technologies Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Muhammad Faris Bin Abdul Hadi, Ankop .Angkasa Kowaris Plastic Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Muhammad Hilman Bin Rosmi, Bintang Packaging Industries (M) Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Nur Farah Shuhada Binti Abu Hassan, Medivest Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Siti Nur Athirah Binti Saimin, Majlis Perbandaran Jasin, 2022 |
| 2022 | Industrial Training Supervisor for Sridharan A/L Ganes, Ankop .Angkasa Kowaris Plastic Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Vaetheyswaran A/L Mageswaran, Ankop .Angkasa Kowaris Plastic Sdn Bhd, 2022 |
| 2022 | Industrial Training Supervisor for Wan Mohd Akmal Hakimi Bin Wan Ismail, Ankop .Angkasa Kowaris Plastic Sdn Bhd, 2022 |
| 2022 | Main Supervisor for Noraniah Binti Kassim, PhD, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Anis Husna Binti Mat Hussain, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Anis Husna Binti Mat Hussain, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Mohamad Syafiq Bin Mohd Shahrudin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Mohamad Syafiq Bin Mohd Shahrudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Muhammad Syazwan Aiman Bin Hisham, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2021 | Co-Supervisor for Lim Mei Chien, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Co-Supervisor for Lim Mei Chien, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Co-Supervisor for Sharon Ting Shu Sze, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Co-Supervisor for Sharon Ting Shu Sze, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Amir Firdaus Bin Kamaruzzaman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Amir Firdaus Bin Kamaruzzaman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Fatin Nurina Binti Mohamad Khair, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Fatin Nurina Binti Mohamad Khair, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Muhammad Azhad Amin Bin Fauzi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Muhammad Azhad Amin Bin Fauzi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Muhammad Zakie Bin Mohd Zin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Muhammad Zakie Bin Mohd Zin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Ngiew Zhen Yee, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Ngiew Zhen Yee, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Nurul Dayana Balqis Binti Nor Walid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Nurul Dayana Balqis Binti Nor Walid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Head of the Program for Appointment as Research Lead Consultant fo Elementary TEchnology Project title "Green Autoclaved Aerated Concrete (AAC) based on Ceramic Waste", Kim Hoe Thye Industries Sdn Bhd, Malaysia, April 2021 |
| 2021 | Industrial Training Supervisor for Muhammad Amirul Firdaus Bin Abu Bakar, Eureka Resources Sdn. Bhd., 2021 |
| 2021 | Industrial Training Supervisor for Muhammad Azman Bin Abu Bakar, Usaha Maju Auto Sdn.Bhd., 2021 |
| 2021 | Industrial Training Supervisor for Muhammad Faizul Amri Bin Mohd Badli, Yusmanida Auto Sdn Bhd, 2021 |
| 2021 | Industrial Training Supervisor for Muhammad Haaziq Bin Zulkefli, Proton Holdings Berhad, 2021 |
| 2021 | Industrial Training Supervisor for Muhammad Haziq Bin Maskan, Truckquip Sdn Bhd, 2021 |
| 2021 | Main Supervisor for Efil Yusrianto, PhD, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Main Supervisor for Izzati Binti Abdul Manaf, MSc, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Main Supervisor for Nur Sahira Marhaini Binti Sharom, MSc, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Mohamad Azmeer Bin Alias, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Mohamad Azmeer Bin Alias, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Muhammad Hafifi Daniel Bin Salamat, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Muhammad Hafifi Daniel Bin Salamat, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Nur Huda Binti Jailani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Nur Huda Binti Jailani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2020 | Co-Supervisor for Mira Quzaybah Binti Hasirin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Co-Supervisor for Muhammad Asyraf Bin Rosman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Co-Supervisor for Nur Fatin Izzaty Binti Mustafa Kamal, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Co-Supervisor for Syed Abdul Hafiz Bin Wan Daud, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohamad Izmer Shazrai Bin Shuhaimi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohamad Izmer Shazrai Bin Shuhaimi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohamad Luqmanul Hamri Bin Abd Malek, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohamad Luqmanul Hamri Bin Abd Malek, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohamad Muhaimeen Bin Mohd Hazman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohamad Muhaimeen Bin Mohd Hazman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohammad Emir Haikal Bin Ahmad Shuffir, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohammad Emir Haikal Bin Ahmad Shuffir, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohd Asri Bin Rahmarturllah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohd Asri Bin Rahmarturllah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohd Danial Fayyadh Bin Mohd Idris, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Mohd Danial Fayyadh Bin Mohd Idris, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Muhamad Abdul Baasith Kharrazi Bin Md Sharizam, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Muhamad Abdul Baasith Kharrazi Bin Md Sharizam, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Industrial Training Supervisor for Ahmad Nazirul Bin Nazri, Sony Emcs Malaysia Sdn Bhd, 2020 |
| 2020 | Industrial Training Supervisor for Ikhsan Mustain Bin Ramlan, Fawster Motorsports Sdn Bhd, 2020 |
| 2020 | Industrial Training Supervisor for Mohammad Aqmal Zuhairie Bin Hani Ros, Top Glove Factory No 14, 2020 |
| 2020 | Industrial Training Supervisor for Mohammad Fithri Bin Roslizan, Top Glove Sdn. Bhd., 2020 |
| 2020 | Industrial Training Supervisor for Mohd Hafiz Bin Hassan Fikri, Volvo Car Manufacturing Malaysia Sdn Bhd, 2020 |
| 2020 | Industrial Training Supervisor for Muhammad Haziq Danisy Bin Mohd Hazmi, Dreamedge Sdn Bhd, 2020 |
| 2020 | Industrial Training Supervisor for Muhammad Kamal Arif Bin Mazlan, Fawster Motorsports Sdn Bhd, 2020 |
| 2020 | Industrial Training Supervisor for Muhammad Nabil Farhan Bin Kamal, Malaysia Automotive Robotics And Iot Institute, 2020 |
| 2020 | Main Supervisor for Mohamad Mohshein Bin Hashim, MSc, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Erra Saffirra Binti Sahrel, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Erra Saffirra Binti Sahrel, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Muhammad Izzudin Bin Azhar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Muhammad Izzudin Bin Azhar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Muhammad Yazid Bin Abd Rahman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Muhammad Yazid Bin Abd Rahman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2019 | Co-Supervisor for Mira Quzaybah Binti Hasirin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Co-Supervisor for Muhammad Asyraf Bin Rosman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Co-Supervisor for Nur Fatin Izzaty Binti Mustafa Kamal, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Co-Supervisor for Syed Abdul Hafiz Bin Wan Daud, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Leo Bong Cheng Ik, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Leo Bong Cheng Ik, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Mohd Khairul Hafez Bin Ya Mohamad, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhamad Alif Afifi Bin Zainudi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhamad Alif Afifi Bin Zainudi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhamad Fakrul Razi Bin Abd Malek, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhamad Fakrul Razi Bin Abd Malek, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhammad Amir Rahimi Bin Zainuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhammad Amir Rahimi Bin Zainuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhammad Farez Najmi Bin Zulkifli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhammad Farez Najmi Bin Zulkifli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhammad Hakim Bin Kamarul Shakirin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Muhammad Hakim Bin Kamarul Shakirin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Industrial Training Supervisor for Afifi Bin Jasni, Johnson & Johnson Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Aizat Bin Azhari, Sust Synergy Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Ali Harith Bin Najib, Mycompare Sdn. Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Hema Rathi A/P Santharan, Europasia Engineering Services Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Mohamad Khairul Feerdaus Bin Mohd Jamal, Pacific Engineering Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Muhammad Nazreen Bin Hardan, Ftk Solution Sdn. Bhd., 2019 |
| 2019 | Industrial Training Supervisor for Nadia Syahiera Binti Mohamad Salleh, Wwf-Malaysia, 2019 |
| 2019 | Industrial Training Supervisor for Nurul Natasha Binti Azni, Nxp Semiconductors, 2019 |
| 2019 | Industrial Training Supervisor for Syed Abd Hafiz Bin Syed Abdul Aziz, Ftk Solution Sdn. Bhd., 2019 |
| 2019 | Supervisor for Mohamad Amirul Ashraf Bin Yahaya, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Mohamad Sahril Bin Md Sah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Mohamad Sahril Bin Md Sah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Muhammad Arif Bin Abdullah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Muhammad Arif Bin Abdullah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Muhammad Haziq Danisy Bin Mohd Hazmi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Muhammad Haziq Danisy Bin Mohd Hazmi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Muhammad Zariq Ikhwann Bin Mohd Zubir, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2018 | Examiner for Ahmad Amirul Bin Mohamat Zaini, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Ahmad Amirul Bin Mohamat Zaini, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Busyra Amanina Binti Abdul Halim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Busyra Amanina Binti Abdul Halim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Karen Lam Kit Lu, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Karen Lam Kit Lu, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Khairul Aiman Bin Anuar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Khairul Aiman Bin Anuar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Lai Zhee Yen, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Lai Zhee Yen, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Mohd Khairul Hafez Bin Ya Mohamad, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Mohd Khairul Hafez Bin Ya Mohamad, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Nur Fatin Nabihah Binti Zaizali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Nur Fatin Nabihah Binti Zaizali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Nurul Atikah Binti Abd Razak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Nurul Atikah Binti Abd Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Nurul Zafirah Binti Mohd Azhar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Nurul Zafirah Binti Mohd Azhar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Syafikah Binti Che Ismail, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Examiner for Syafikah Binti Che Ismail, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Industrial Training Supervisor for Mohamad Azizi Bin Mustafa, Toyota Assembly Services Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Muhamad Arif Bin Abdul Jalil, Flexlink Automation Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Muhammad Haikal Bin Mohd Fodzi, Eurowide Construction Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Muhammad Ilham Bin Zainal Abidin, Eurowide Construction Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Muhammad Naeim Bin Shariff, Precision Control Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Nooradilah Binti Rohidzad, Panasonic Appliances R&D Centre Asia Pacific Sdn Bhd. , 2018 |
| 2018 | Industrial Training Supervisor for Nurul Afiqah Binti Mohd Sharip, Mega Label (Malaysia) Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Ooi Chee Yang, Pintaras Geotechnics Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Pung Yi Lin, Pintaras Geotechnics Sdn Bhd, 2018 |
| 2018 | Industrial Training Supervisor for Siti Fatihah Binti Halmi, Panasonic Appliances R&D Centre Asia Pacific Sdn Bhd. , 2018 |
| 2018 | Main Supervisor for Muhammad Haikal Bin Mohd Fodzi, MSc, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Main Supervisor for Nur Athirah Binti Huzaisham, MSc, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Main Supervisor for Rupashinii A/P Thana Singam, MSc, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Athirah Binti Zakaria, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Athirah Binti Zakaria, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Fatin Nadiah Binti Mat Jais, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Fatin Nadiah Binti Mat Jais, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Izzatul Zawani Binti Baharudin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Izzatul Zawani Binti Baharudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Linghesvaran A/L Subramaniam, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Linghesvaran A/L Subramaniam, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Nursyuhada Mohd Johari, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Nursyuhada Mohd Johari, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Thineshnaidu A/L Letchumanan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Thineshnaidu A/L Letchumanan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Vikneshvaran A/L Genesan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Vikneshvaran A/L Genesan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Wardah Binti Sidni, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Wardah Binti Sidni, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Zuraida Binti Ithnain, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Zuraida Binti Ithnain, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2017 | Co-Supervisor for Nur Athirah Binti Huzaisham, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Sum Man Kent, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Fatihah Binti Halmi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Fatihah Binti Halmi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Fatimah Binti Ibrahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Fatimah Binti Ibrahim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Qazzirah Binti Mohd Sufian, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Qazzirah Binti Mohd Sufian, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Saleha Binti Mohd Sairi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Siti Saleha Binti Mohd Sairi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Tan Jia Wen, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Tan Jia Wen, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Tang Ling Fang, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Tang Ling Fang, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Tang Tiang Gan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Tang Tiang Gan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Atiqah Zafirah Binti Zainudin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Atiqah Zafirah Binti Zainudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Chew Gin Yan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Chew Gin Yan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Chow Li Kien, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Chow Li Kien, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Kumudha A/P Mathava, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Kumudha A/P Mathava, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Nor Farhanah Binti Md Zin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Nor Farhanah Binti Md Zin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Nur Athirah Binti Huzaisham, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Nuraisyah Binti Taib, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Nuraisyah Binti Taib, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Sum Man Kent, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Tan Ka Seng, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Tan Ka Seng, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2016 | Examiner for Afiqah Izzati Binti Ishak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Balqis Nadhirah Binti Saat, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Chan Pang Cik, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Hayyudin Bin Asmadi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Jawahir Binti Mohd Nor, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Mohamad Shaffiee Bin Kamaludin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Muhamad Najib Bin Hassan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Muhammad Elyas Muiz Bin Ahmad Shaffie, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Nur Nabila Ajeerah Binti Shafie, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Siti Khadijah Binti Mohammed Zahary, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Theepa A/P Gunusegaran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Industrial Training Supervisor for Adly Dzil Ikram Bin Zahir, Symphony Manufacturing & Services Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Muhammad Farid Naqib Bin Md Ghazali, Mnb Engineering Sdn Bhd , 2016 |
| 2016 | Industrial Training Supervisor for Muhammad Syafiq Bin Ma'Amor, Majlis Perbandaran Ampang Jaya, 2016 |
| 2016 | Industrial Training Supervisor for Ngo Cham Yeow, Precision Control Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Noor Hidayah Binti Che Ismail, Takai Technology (M) Sdn. Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Nur Khairiah Binti Kamarudzaman, Pakaian Saling Erti, 2016 |
| 2016 | Industrial Training Supervisor for Sii Hee Ying, Cti Resources Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Syahirah Binti Ghazali @ Jusof, Kesm Industries Berhad, 2016 |
| 2016 | Industrial Training Supervisor for Tan Kok Sion, Hariman Energy Asia Sdn Bhd, 2016 |
| 2016 | Supervisor for Anis Nasuha Binti Noor Azman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Nur Aqillah Binti Mohd Shamsuddin Tan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Siti Nur Najiha Binti Nor Baharin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Syahir Arif Bin Samsuddin Shah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
EXTENSION & PUBLIC SERVICES
| Year | Description | Level |
|---|---|---|
| 2024 | Academic Program Advisor for Pelantikan Penasihat bagi Program Kunjungan Hormat ke atas Yang Berhormat Tuan Ir. Ts. Mohamad Fazli bin Mohamad Salleh (Dun Bukit Pasir), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2024, January 2024 | University |
| 2023 | Facilitator for Program Modul Jati Diri GRITT Kolej Kediaman Kampus Pagoh UTHM - Semester II Sesi 2022/2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023, May 2023 | University |
| 2023 | Programme Coordinator for Pengarah Program "Bengkel Pengisian Prosedur Kerja Selamat (SOP) bagi Pelaksanaan Penaksiran Risiko kepada Kesihatan (CHRA)", Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, December 2023, December 2023 | University |
| 2023 - 2024 | Assessor / Reviewer for Juri Program SULAM-PGB Berkarya 2023 Fakulti Teknologi Kejuruteraan, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2023, November 2023 - January 2024 | University |
| 2023 - 2024 | Committee Member for Ahli Jawatankuasa Prosiding, FTK UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023, January 2023 - January 2024 | University |
| 2023 | Committee Member for Ahli Jawatankuasa Program Pemindahan Ilmu (KTP): Facility Management Soft Service, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023, October 2023 | University |
| 2023 | Committee Member for Ahli Jawatankuasa Sulam bagi Kursus Keselamatan dan Kesihatan Pekerjaan di Kolej Vokasional Muar (KOVAR) Anjuran FTK, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023, October 2023 | University |
| 2023 - 2024 | Committee Member for Jawatankuasa Penyelarasa Tabika Perpaduan, Pejabat Perpaduan Negara, Muar, Malaysia, March 2023, March 2023 - March 2024 | Goverment |
| 2023 | Programme Coordinator for Pengarah Program Nanotechnology STEM Mechytech 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June 2023 | University |
| 2023 - 2024 | Mentor for Program Mentor-Mentee: Knowledge Transfer Program (KTP) Reka Bentuk dan Teknologi (RBT) di SMK Sultan Abdul Jalil 2023, SMK Sultan Abdul Jalil, Malaysia, September 2023, September 2023 - August 2024 | District |
| 2023 | Director, Program Related Center (PSH) for Pengarah Program bagi Program "Knowledge Transfer Program (KTP): Reka Bentuk dan Teknologi (RBT) - STEM Rekabentuk Mekatronik di SMK Sultan Abdul Jalil 2023", Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September 2023, September 2023 | State |
| 2023 | Director, Program Related Center (PSH) for Pengarah Program bagi Program Sekolah Angkat Kolej Vokasional Muar 2023: Program Pemindahan Ilmu (KTP) - Pengenalan dan Pemantapan Pendidikan Berasaskan Hasil Pembelajaran Outcome-Based Education (OBE) & Persediaan Audit bagi Permohonan Akreditasi Penuh., Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September 2023, September 2023 | District |
| 2023 | Speaker for Penceramah bagi "Knowledge Transfer Program (KTP): A Sustainable Future Through Innovative STEM Education" di SMK Sultan Abdul Jalil, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023, October 2023 | Goverment |
| 2023 | Evaluation Panel of Project/Student for Pelantikan Panel Temuduga Sempena Sesi Pemilihan Calon Majlis Kepimpinan Pelajar (MKP), Kolej Kediaman Kampus Pagoh, UTHM Sesi 2023/2024, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2023, July 2023 | University |
| 2023 | Facilitator for Fasilitator bagi Program "Knowledge Transfer Program (KTP): Reka Bentuk dan Teknologi (RBT) - STEM Rekabentuk Mekatronik di SMK Sultan Abdul Jalil 2023", Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September 2023, September 2023 | District |
| 2023 | Facilitator for Fasilitator bagi Program "Knowledge Transfer Program (KTP): A Sustainable Future Through Innovative STEM Education" di SMK Sultan Abdul Jalil, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2023, October 2023 | District |
| 2023 | Committee Member for Program MechyTech Day 2023, Jabatan Teknologi Kejuruteraan Mekanikal, FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June 2023 | University |
| 2023 | Examination Invigilator for Peperiksaan Akhir Semester II Sesi 2022/2023 Program Sarjana Muda dan Diploma, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2023, July - August 2023 | University |
| 2023 | Committee Member for Pelantikan AJK Jaringan dan Hubungan Industri, FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023, January - December 2023 | University |
| 2023 | Committee Member for Pelantikan sebagai AJK Prosiding, FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023, January - December 2023 | University |
| 2023 | Deputy Director, Program Related Center (PSH) for Pelantikan Timbalan Pengarah Program CSR: Karnival Sukan Tabika Perpaduan Zon Pagoh, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023, January - February 2023 | University |
| 2023 | Committee Member for Pelantikan sebagai AJK STEM, FTK, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, February 2023, February - December 2023 | University |
| 2023 - 2024 | Committee Coordinator for Pelantikan sebagai Penyelaras Inisiatif STEM Fakulti, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2023, March 2023 - December 2024 | University |
| 2023 | Secretary for Setiausaha Jawatankuasa Keselamatan dan Kesihatan Pekerjaan FTK, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023, January - December 2023 | University |
| 2023 | Committee Member for Program Keceriaan Prasaran Kolej (PKPK), Kolej Kediaman Kampus Pagoh, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June 2023 | University |
| 2023 | Committee Member for Petugas Jamuan bagi Majlis Sambutan Hari Raya Aidilfitri Pelajar UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023, May 2023 | University |
| 2023 | Committee Member for Pra-Program Kepimpinan Harapan (PKH) 2023 Kolje Kediaman Kampus Pagoh, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2023, July 2023 | University |
| 2023 | Committee Member for Kontigen Kolej Kediaman Kampus Pagoh (KKKP) Sempena Program Sukan antara Kolej UTHM (SUKOL) 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June 2023 | University |
| 2023 | Evaluation Panel of Project/Student for Panel Temuduga Sempena Sesi Pemilihan Calon Majlis Kepimpinan Pelajar (MKP), Kolej Kediaman Kampus Pagoh UTHM Sesi 2023/2024, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2023, July 2023 | University |
| 2023 | Member for Pegawai Pengiring Sempena Program Sukarelawan Khidmat Komuniti: My Kampung @Felda Sri Jaya, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June 2023 | University |
| 2023 | Advisor/Chairman for Program Trash4Cash with KITARecycle, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June 2023 | University |
| 2022 - 2023 | Committee Member for Pelantikan Ahli Jawatankuasa Pelaksana bagi Program Keceriaan Prasarana Kolej (PKPK), Kolej Kediaman Kampus Pagoh, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2022, June 2022 - February 2023 | University |
| 2022 | Advisor/Chairman for Penasihat bagi Program Khidmat Lepak IT Anjuran Kolej Kediaman Kampus Pagoh, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, December 2022, December 2022 | University |
| 2022 | Head for Appointment as Lead Consultant foe Fieldwork: Development of Autoclaved Aerated Concrete (AAC) based on Glass-Ceramic Industrial Waste, Kim Hoe Thye Industries Sdn, Malaysia, April 2022, April - December 2022 | Private |
| 2022 - 2023 | Committee Coordinator for Master Trainer Program Jati Diri GRITT bagi Sesi 2022/2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2022, August 2022 - July 2023 | University |
| 2022 | Advisor/Chairman for Penasihat bagi Program Khidmat Masyarakat (CSR) & Pemindahan Ilmu (KTP): Pemasangan Bangku & Keceriaan Kolej Anjuran Kolej Kediaman Kampus Pagoh, UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, December 2022, December 2022 | University |
| 2022 - 2023 | Committee Member for Pelantikan AJK Penyelaras Tabika Perpaduan Celik Ilmu bagi Tahun 2022-2023, Pegawai Perpaduan Daerah Muar, Malaysia, March 2022, March 2022 - February 2023 | District |
| 2022 - 2024 | Project Supervisor/Teaching Training for Pelantikan Master Trainer Program Jati Diri GRITT bagi SESI 2022/2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September 2022, September 2022 - February 2024 | University |
| 2022 | Guest Speaker for Bengkel Penulisan Proposal Geran, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2022, November 2022 | University |
| 2022 | Secretary for Jawatankuasa Keselamatan dan Kesihatan Pekerjaan, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2022, January - December 2022 | University |
| 2022 | Facilitator for Pelantikan Fasilitator bagi Program "Pemindahan Ilmu (KTP) dan Khidmat Masyarakat (CSR): Teknologi Pemprosesan Kordial Nanas dan Jus Nanas" di Inap Desa Teratak Warisan MSL, Muar, Johor, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2022, August 2022 | University |
| 2022 | Facilitator for Pelantikan sebagai Fasilitator bagi Program "Corporate Social Responsibility (CSR) of Waste Recycle Bank in Primary School" di Sek Keb Padang Jawa 2, Selangor, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2022, July 2022 | University |
| 2022 | Facilitator for Pelantikan sebagai Fasilitator bagi Corporate Social Responsibility (CSR) of Waste Recycle Bank Programme in Primary School di Sek Keb Taman Sri Andalas, Selangor, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2022, July 2022 | University |
| 2022 | Facilitator for Pelantikan sebagai Fasilitator bagi Knowledge Transfer Program (KTP) Awareness Solid Waste Management in Primary School di Sekolah Keb Raja Muda, Selangor, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2022, July 2022 | University |
| 2022 | Programme Coordinator for Pelantikan Pengarah Program bagi Taklimat Pengurusan Kebakaran dan Pasukan Tindakan Kecemasan (ERT), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2022, August 2022 | University |
| 2022 | Facilitator for Pelantikan Fasilitator bagi Program "Knowledge Transfer Programme (KTP) of Awareness Solid Waste Management in Primary School" di Sekolah Kebangsaan HICOM, Selangor, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2022, July 2022 | University |
| 2021 | Invited Lecturer for Pelantikan penyelarasa sekolah angkat di bawah FTK UTHM, Kolej Vokasioanal Muar, Malaysia, July 2021, July - December 2021 | Goverment |
| 2021 - 2022 | Head for Pelantikan Penyelaras Sekolah Angkat (Kolej Vokasional Muar) di bawah Fakulti Teknologi Kejuruteraan, UTHM, Kolej Vokasional Muar, Malaysia, July 2021, July 2021 - December 2022 | District |
COURSES & TRAINING
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2024 | MAJLIS IFTAR PERDANA FTK UTHM UTHM / Dewan A9, Kolej Kediaman Kampus Pagoh, UTHM Pagoh | 25/03/2024 |
| 2024 | WEBINAR 'STRATEGY TO SCURE INDUSTRY GRANT' FKEE,UTHM / ONLINE | 14/03/2024 |
| 2024 | JERAYAWARA AMALAN PEMBELAJARAN TERADUN UTHM / ATAS TALIAN (Ms TEAMS) | 14/03/2024 |
| 2024 | KNOWLEDGE TRANSFER PROGRAM (KTP) & SHARING FACILITIES: PEMBUATAN KERTAS DAUN NANAS KEPADA IKS INDUSTRI - PERNIAGAAN BENANG SERAT NANAS UTHM / Makmal Projek Teknologi Pembungkusan | 11/03/2024 |
| 2024 | 4TH INTERNATIONAL CONFERENCE ON COMPUTING, INFORMATION SCIENCE AND ENGINEERING (ICISE) & 1ST INTERNATIONAL CONFERENCE ON SOCIAL SCIENCE, EDUCATION AND BUSINESS (ICOSEB 2024) - (ICISE & ICOSEB 2024) LAIN-LAIN / PRIMULA BEACH HOTEL, KUALA TERENGGANU | 07/03/2024 - 08/03/2024 |
| 2024 | TAKLIMAT PENGUJIAN GLOW IN THE DARK SAUJANA TERAJU DAN LAWATAN BERSAMA SIRIM UTHM / Bilik Mesyuarat 3, UTHM Kampus Cawangan Pagoh | 04/03/2024 |
| 2024 | PROGRAM JOM CERGAS DAN SIHAT BERSAMA KELAB STAF UTHM (KSUTHM) SIRI 2 UTHM / Padang Kawad UTHM (Kampus Induk), Dewan A9 Kolej Kediaman UTHM (Kampus Pagoh) | 25/02/2024 |
| 2024 | FORUM ISRAK DAN MIKRAJ UTHM / RUANG LEGAR, UTHM KAMPUS CAWANGAN PAGOH | 14/02/2024 |
| 2024 | PROGRAM RIADAH FAKULTI : GOTONG ROYONG DI LADANG BULUH UTHM KAMPUS PAGOH UTHM / Ladang Buluh UTHM Kampus Pagoh | 07/02/2024 |
| 2024 | KNOWLEDGE TRANSFER PROGRAM (KTP) & SHARED INDUSTRY FACILITIES FOR POSTGRADUATE STUDENT UTHM 2024 UTHM / Kim Hoe Thye Industries Sdn Bhd | 16/01/2024 - 17/01/2024 |
| 2024 | KNOWLEDGE TRANSFER PROGRAM (KTP): KESELAMATAN DAN KESIHATAN PEKERJAAN UTHM / ATAS TALIAN MICROSOFT TEAMS | 03/01/2024 |
| 2023 | BENGKEL PENGISIAN PROSEDUR KERJA SELAMAT (SOP) BAGI PELAKSANAAN PENAKSIRAN RISIKO KEPADA KESIHATAN (CHRA) UTHM / Bilik Mesyuarat 1, Blok A1, UTHM Kampus Cawangan Pagoh | 21/12/2023 |
| 2023 | SESI TRAINING OF TRAINERS (TOT) KEPADA PANEL PENILAI DALAMAN PERMOHONAN SKIM GERAN PENYELIDIKAN FUNDAMENTAL (FRGS) TAHUN 2024 UTHM / Bilik Lestari 1, Aras 3, Perpustakaan Tunku Tun Aminah (PTTA) | 19/12/2023 |
| 2023 | THE 2ND INTERNATIONAL CONFERENCE ON ADVANCED SCIENCE AND ENGINEERING 2023 (ICASE 2023) UniMAP / Penang, Malaysia | 25/11/2023 - 26/11/2023 |
| 2023 | PROGRAM KNOWLEDGE TRANSFER PROGRAM (KTP): A SUSTAINABLE FUTURE THROUGH INNOVATIVE STEM EDUCATION FKMP,UTHM / DEWAN SEKOLAH, SMK SULTAN ABDUL JALIL, KM5, JALAN MERSING, 86000 KLUANG, JOHOR DARUL TAKZIM | 29/10/2023 |
| 2023 | WEBINAR RECYCLING ALUMINIUM FOR SUSTAINABLE DEVELOPMENT BY PLASTIC DEFORMATION PROCESSING TECHNOLOGIES IN GREEN MANUFACTURING UTHM / Microsoft Team Meeting | 07/09/2023 |
| 2023 | KNOWLEDGE TRANSFER PRORGAM (KTP) REKA BENTUK DAN TEKNOLOGI (RBT) - STEM REKABENTUK MEKATRONIK DI SMK SULTAN ABDUL JALIL 2023 UTHM / Bilik Excellent, SMK Sultan Abdul Jalil, KM 5, Kluang, Johor | 05/09/2023 |
| 2023 | SEMINAR PERSEKITARAN ERGONOMIK DAN HIRARC DI TEMPAT KERJA KEPADA STAF-STAF FTK UTHM UTHM / Microsoft Teams (Atas Talian) | 13/08/2023 |
| 2023 | TIPS AND TRICKS FOR WINNING INNOVATION COMPETITION UTHM / Online | 18/07/2023 |
| 2023 | MESYUARAT BERSAMA STAKEHOLDER FAKULTI TEKNOLOGI KEJURUTERAAN TAHUN 2023 UTHM / DALAM TALIAN | 16/07/2023 |
| 2023 | PROGRAM CSR MURAL DINDING BANGUNAN PERTUBUHAN KEBAJIKAN PEMULIHAN DALAM KOMUNITI (PKPDK) PAGOH DENGAN KERJASAMA FAKULTI TEKNOLOGI KEJURUTERAAN (FTK), UNIVERSITI TUN HUSSEIN ONN MALAYSIA UTHM / BANGUNAN PKPDK PAGOH, KOMPLEKS PENGHULU MUKIM JORAK , 84600 PAGOH, JOHOR. | 22/06/2023 |
| 2023 | MECHYTECH DAY 2023 UTHM / KEMUDAHAN GUNASAMA HUB PENDIDIKAN TINGGI PAGOH (HPTP) | 06/06/2023 - 07/06/2023 |
| 2023 | KURSUS SIRI KESEDARAN KESIHATAN MENTAL: PENASIHAT AKADEMIK & KERJAYA PRIHATIN SIRI 3 UTHM / APLIKASI ZOOM | 19/03/2023 |
| 2023 | TVET EXPERT FORUM : 'LEADING TVET : ISSUES AND CHALLENGES FROM INDUSTRY PERSPECTIVES' LAIN-LAIN / BILIK BANKUET, DSI UTHM | 06/03/2023 |
| 2023 | PROGRAM UTHM GET FIT @ PAGOH BIL.01/2023 UTHM / Dewan A9, Kolej Kediaman UTHM-Kampus Cawangan Pagoh | 22/02/2023 |
| 2023 | TAKLIMAT PROGRAM PEMBELAJARAN SEPANJANG HAYAT DAN APEL, FAKULTI TEKNOLOGI KEJURUTERAAN UTHM / UTHM-KAMPUS CAWANGAN PAGOH | 20/02/2023 |
| 2023 | PRA-BENGKEL SASARAN KERJA TAHUNAN 2023 FAKULTI TEKNOLOGI KEJURUTERAAN UTHM / UTHM-KAMPUS CAWANGAN PAGOH | 31/01/2023 |
| 2023 | KOLOKIUM PENYELIDIKAN PASCASISWAZAH FTK SEMESTER 1 SESI 2022/2023 UTHM / SECARA ATAS TALIAN | 01/01/2023 - 03/01/2023 |
| 2022 | PROGRAM PEMINDAHAN ILMU (KTP) DAN KHIDMAT MASYARAKAT (CSR): TEKNOLOGI PEMPROSESAN KORDIAL NANAS & JUS NANAS UTHM / Inap Desa Teratak Warisan MSL, No.161, Kg Sg Sudah, 83600 Muar, Johor | 05/09/2022 - 06/09/2022 |
| 2022 | 5KM MERDEKA FUN RUN UTHM / LOT PARKIR WING KANAN BLOK A, UTHM-KAMPUS CAWANGAN PAGOH | 25/08/2022 |
| 2022 | BENGKEL PENULISAN MODUL UTHM / BILIK MESYUARAT 6, BLOK A1, UTHM KAMPUS PAGOH | 18/08/2022 |
| 2022 | TAKLIMAT PRA-BENGKEL PENULISAN MODUL UTHM / Zoom | 17/08/2022 |
| 2022 | TAKLIMAT PENGURUSAN KEBAKARAN DAN PASUKAN TINDAKAN KECEMASAN (ERT) UTHM / BM5, Blok A1, Aras 1, UTHM Kampus Cawangan Pagoh | 15/08/2022 |
| 2022 | FASA 2: SEK KEB PADANG JAWA 2 CORPORATE SOCIAL RESPONSIBILITY (CSR) OF WASTE RECYCLE BANK PROGRAMME IN PRIMARY SCHOOL UTHM / DEWAN SEKOLAH, SEKOLAH KEBANGSAAN PADANG JAWA 2, JALAN KOTA RAJA, KAWASAN 1, 41000 KLANG, SELANGOR | 29/07/2022 |
| 2022 | FASA 2: SEK KEB RAJA MUDA PROGRAM 'SULAM FTK: KNOWLEDGE TRANSFER PROGRAMME (KTP) OF AWARENESS SOLID WASTE MANAGEMENT IN PRIMARY SCHOOL' UTHM / SEK KEB RAJA MUDA, 40000 SHAH ALAM, SELANGOR | 21/07/2022 |
| 2022 | PROGRAM INTERNATIONAL SHARING SESSION DARI DELEGASI SMARTEX ERASMUS+ UTHM / BILIK MESYUARAT 1 UTHM KAMPUS PAGOH | 20/07/2022 |
| 2022 | FASA 1: SEK KEB TAMAN SRI ANDALAS CORPORATE SOCIAL RESPONSIBILITY (CSR) OF WASTE RECYCLE BANK PROGRAMME IN PRIMARY SCHOOL UTHM / SEK KEB TAMAN SRI ANDALAS, JALAN TUN DR ISMAIL, OFF, JLN LANGAT, TMN SRI ANDALAS, 41200 KLANG, SELANGOR | 19/07/2022 |
| 2022 | TAKLIMAT PENYELIAAN LI SECARA DALAM TALIAN FTK SEM 2 SESI 2021/2022 UTHM / SECARA DALAM TALIAN | 18/07/2022 |
| 2022 | PROGRAM 'SULAM FTK: KNOWLEDGE TRANSFER PROGRAMME (KTP) OF AWARENESS SOLID WASTE MANAGEMENT IN PRIMARY SCHOOL' UTHM / DEWAN SEKOLAH, SEKOLAH KEBANGSAAN HICOM, JALAN KAJANG 27/10, SEKSYEN 27, 40400 SHAH ALAM, SELANGOR | 15/07/2022 |
| 2022 | KOLOKIUM PENYELIDIKAN PASCASISWAZAH FTK SEMESTER 2 SESI 2021/2022 UTHM / Online google meet | 03/07/2022 - 05/07/2022 |
| 2022 | INDUSTRIAL TALK ON TEXTILE, PACKAGING AND ADVANCED MACHINING TECHNOLOGY UTHM / https://uthm-edu-my.zoom.us/j/92828922107?pwd=MUs0VHNpSmU5QXdLcnFkRWV2UmlCQT09 | 28/06/2022 |
| 2022 | TESTING CONSULTATION USING UTHM EQUIPMENT LAIN-LAIN / BILIK MESYUARAT 1, KAMPUS PAGOH | 23/06/2022 |
| 2022 | PROGRAM JERAYAWARA PTTA@FAKULTI 2022 (FTK) UTHM / Aplikasi Google Meet | 19/06/2022 |
| 2022 | LAWATAN AKREDITASI PENUH ETAC BAGI TAHUN 2022, FAKULTI TEKNOLOGI KEJURUTERAAN, UTHM UTHM / UTHM Kampus Cawangan Pagoh | 14/06/2022 - 15/06/2022 |
| 2022 | LAWATAN PRA-AKREDITASI ETAC BAGI TAHUN 2022, FAKULTI TEKNOLOGI KEJURUTERAAN, UTHM UTHM / UTHM Kampus Cawangan Pagoh | 26/05/2022 |
| 2022 | KNOWLEDGE TRANSFER PROGRAMME (KTP) & SHARED FACILITIES FOR STUDENT UTHM UTHM / Kim Hoe Thye Industries Sdn Bhd, No.99, Lot 143, Jalan Air Manis, Bukit Mor, 84150 Parit Jawa, Johor, Malaysia | 25/04/2022 - 28/04/2022 |
| 2022 | TAKLIMAT LATIHAN INDUSTRI FTK SIRI 1 2022/2023 UTHM / ZOOM | 07/04/2022 |
| 2022 | SEMINAR PERATURAN KESELAMATAN DI DALAM KAMPUS & MAKMAL UNIVERSITI KEPADA STAF DAN PELAJAR FTK UTHM / ZOOM | 24/03/2022 |
| 2022 | WEBINAR PENYEDIAAN MODUL P&P UTHM 2022 SIRI 3 UTHM / PAUTAN GOOGLE MEET | 15/03/2022 |
| 2022 | BUSINESS PITCHING & COMMUNICATION UTHM / GOOGLE MEET | 15/03/2022 |
| 2022 | SEMINAR KUMPULAN INOVASI KREATIF (KIK) KOLEJ VOKASIONAL ZON JOHOR FKMP,UTHM / Online Platform (Zoom & Youtube) | 08/03/2022 |
| 2022 | KOLOKIUM PENYELIDIKAN PASCA SISWAZAH SEMESTER 1 SESI 2021/2022 UTHM / ONLINE GOOGLE MEET | 02/01/2022 - 04/01/2022 |
| 2021 | PROGRAM SEKOLAH ANGKAT KOLEJ VOKASIONAL MUAR FASA 1 KREATIVITI DAN INOVASI DALAM PENGAJARAN DAN PEMBELAJARAN (PNP) UTHM / Secara atas talian | 18/11/2021 |
| 2021 | SEMINAR PEMATUHAN PERATURAN MAKMAL KEPADA PELAJAR FTK UTHM / Secara atas talian | 10/11/2021 |
| 2021 | TAKLIMAT PROJEK SARJANA MUDA (PSM) BERSAMA STAF UTHM / Zoom link : https://bit.ly/PSMTalk Meeting ID : 225 864 7250 | 03/11/2021 |
| 2021 | BENGKEL PEMANTAPAN AMALI ATAS TALIAN FTK UTHM UTHM / Atas Talian | 03/10/2021 |
| 2021 | SEMINAR KESELAMATAN DAN KESIHATAN PEKERJAAN UTHM / Zoom Online UTHM | 23/09/2021 |
| 2021 | MAJLIS BACAAN YASSIN AUDIT ETAC UTHM / platform online google meet | 09/09/2021 |
| 2021 | TAKLIMAT PENGISIAN LAPORAN PRESTASI GERAN PENYELIDIKAN DANA KEMENTERIAN PENGAJIAN TINGGI (DPKPT) DI MYGRANTS UTHM / Pautan Google Meet | 11/08/2021 |
| 2021 | KURSUS SPREADSHEET TEMPLATE UTHM / SECARA ATAS TALIAN | 27/07/2021 |
| 2021 | TAKLIMAT PENYELIAAN PELAJAR LI SEM 2 2020/2021 FTK UTHM UTHM / SECARA ATAS TALIAN | 26/07/2021 |
| 2021 | SESI PERKONGSIAN BERKAITAN GERAN KOMERSIAL BERSAMA DR. MARIAM - UTM UTHM / Aplikasi Zoom : https://bit.ly/SESIPERKONGSIANGERANKOMERSIAL | 08/07/2021 |
| 2021 | STRATEGIC PARTNERSHIP PROGRAMME (STEP) : COVID-19 AND BIOMEDICAL INDUSTRIES : WHERE DO WE GO FROM HERE? UTHM / APLIKASI ZOOM | 08/07/2021 |
| 2021 | PROGRAM WITH ADJUNCT PROFESSOR JTKM FTK OPTIMIZING TECHNOPRENEUSHIP FOR SUSTAINABLE GROWTH UTHM / Zoom online | 04/07/2021 |
| 2021 | TAKLIMAT LATIHAN INDUSTRI SIRI 2 SEM 1 2020/2021 FTK UTHM UTHM / SECARA ATAS TALIAN | 27/06/2021 |
| 2021 | SESI TAKLIMAT RESEARCH ENHANCED - STRUCTURED INTERNSHIP PROGRAMME (RE-SIP) FTK 2021 UTHM / SECARA ATAS TALIAN | 16/06/2021 |
| 2021 | KOLOKIUM PENYELIDIKAN SEM 2 SESI 2020/2021 UTHM / google meet platform | 13/06/2021 - 15/06/2021 |
| 2021 | NATURAL FIBER FOR SUSTAINABLE DEVELOPMENT IN FASHION, STATIONARY AND LIFESTYLE PRODUCTS UTHM / ZOOM | 10/06/2021 |
| 2021 | FORUM TIADA TAPAK PELUPUSAN SISA : BERSEDIAKAH KITA? UTHM / ZOOM MEETING | 06/06/2021 |
| 2021 | PTTA RESEARCH WEEK WEBINAR 24 MEI SIRI 2 UTHM / online/meet | 24/05/2021 |
| 2021 | MAJLIS BACAAN YASIN & BACAAN DOA SELAMAT UTHM / - | 29/04/2021 |
| 2021 | MAJLIS BACAAN YASIN & BACAAN DOA SELAMAT UTHM / - | 22/04/2021 |
| 2021 | 11TH CREATION, INNOVATION, TECHNOLOGY & RESEARCH EXPOSITION (CITREX 2021) UMP / UNIVERSITI MALAYSIA PAHANG | 07/04/2021 |
| 2021 | KURSUS AUTHOR UTHM / SECARA ONLINE | 18/03/2021 |
| 2021 | PROGRAM PEMERKASAAN KOMPETENSI PELAJAR FTK: LALUAN KERJAYA UNTUK MENJADI JURUTERA PROFESIONAL UTHM / Online googlee meet: https://meet.google.com/hnk-wjnn-cuk | 15/03/2021 |
| 2021 | CERAMAH PENERBITAN BUKU DAN MODUL UTHM / ZOOM MEET | 15/03/2021 |
| 2021 | JERAYAWARA PENULISAN TESIS SECARA INDUSTRI UTHM / - | 03/03/2021 |
| 2021 | GOLD IN INNOVATION-JURY'S PERSPECTIVE- UTHM / (Virtual) Google Meet:meet.google.com/eac-wotm-qqh | 24/02/2021 |
| 2021 | TAKLIMAT PERATURAN AM DAN KHUSUS MAKMAL BENGKEL FAKULTI TEKNOLOGI KEJURUTERAAN FTK SIRI 1 2021 UTHM / Secara atas talian (google meets) | 18/02/2021 |
| 2021 | PERKONGSIAN TEKNOLOGI : PENGGUNAAN SEMULA SISA MAKANAN ANJURAN FKAAB UTHM / - | 26/01/2021 |
| 2021 | TAKLIMAT BERKAITAN PENYELIAAN LATIHAN INDUSTRI FAKULTI TEKNOLOGI KEJURUTERAAN (FTK) UTHM / Secara atas talian | 19/01/2021 |
| 2021 | EKSPO REKACIPTA DAN PAMERAN PENYELIDIKAN UNIMAP (EREKA 2021) UniMAP / VIRTUAL | 18/01/2021 - 18/02/2021 |
| 2021 | JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI TEKNOLOGI KEJURUTERAAN UTHM / ZOOM | 12/01/2021 |
| 2021 | PROGRAM KOLOKIUM PENYELIDIKAN SEM 1 SESI 2020/2021 UTHM / - | 10/01/2021 - 11/01/2021 |
INTELLECTUAL PROPERTY
| ID IP | TITTLE PRODUCT | TYPE OF IP | NO. APPLICATION | ROLE |
|---|---|---|---|---|
| CP978 | Methodology Preparation of Superhyrophobic Bamboo of Gigantochloa Scortechinii Species Fiber Treated with Silance Coupling Agent | Hak Cipta (Copyright) | LY2023J03503 | PEREKA CIPTA/PENYELIDIK BERSAMA |
| PT197 | An Aerated Cement Composition And A Method For Producing An Aerated Concrete Product Using The Composition Thereof | Paten (Patent) | PI2020000864 | PEMILIK/PENYELIDIK UTAMA |
EXHIBITION
| EXHIBITION ID | PRODUCT TITTLE | EXPO NAME | RECOGNITION |
|---|---|---|---|
| 21CITREX03 | MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs) | CITREX 2021 | Emas dan Setara |
| 21CITREX02 | CERAMIC AIRCRETE | CITREX 2021 | Emas dan Setara |
| 21EREKA02 | MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs) | EREKA 2021 | Emas dan Setara |
| 21EREKA01 | MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs) | EREKA 2021 | Anugerah Khas |
| 20MTE07 | G - Ceramic Aircrete | MTE 2020 | Perak dan Setara |
| 19PECIPTA11 | Hydro-Dyes | PECIPTA 2019 | Perak dan Setara |
| 16ITEX21 | TexCO Panel | ITEX 2016 | Perak dan Setara |
ENDOWMENT
| TAHUN | ENDOWMEN | PERANAN | NILAI |
|---|---|---|---|
| AUTOCLAVED AERATED CONCRETE (AAC) BENCH 5 UNITS | KETUA | 4,000.00 | |
| 2023 | PROGRAM RAYA KITA KITA | AHLI | 4,500.00 |
| 2021 | Mould Deck Panel kepada Fakulti Teknologi Kejuruteraan | KETUA | 4,000.00 |
| 2021 | 5 Unit AAC Bench kepada Kolej Kediaman Pagoh | KETUA | 4,000.00 |
| 2020 | SUMBANGAN 53 UNIT PENYAMAN UDARA KEPADA KOLEJ KEDIAMAN PAGOH | AHLI | 94,350.00 |
AWARD
| TAHUN | NAMA ANUGERAH / PENCAPAIAN | PENGANUGERAH | PERINGKAT |
|---|---|---|---|
| 2022 | TOP 10 OUTSTANDING RESEARCHER S TOP 10 BEST WINNER | (FOR YEAR 2020-2021) | UNIVERSITI |
| 2021 | RESEARCH & INNOVATION TECHNOLOGY COMPETITION 2021 (RITEC 2021)
- "OIL PALM EMPTY FRUIT BUNCHES REINFAREED PLASTIC WASTE FOR POLYMER COMPOSITES (OPEFB-P0Cs)
- (Silver Medal) SILVER | UTHM | UNIVERSITI |
| 2021 | RESEARCH & INNOVATIVE TECHNOLOGY COMPETITION - RITEC 2021
- AUTOCLAVED AERATED CONCRETE (AAC) GYPSUM - CERAMIC WASTE
- (GOLD AWARD) GOLD | UTHM | UNIVERSITI |
| 2021 | INTERNATIONAL ALUMNI CONVENTION AND INNOVATION EXHIBITION (INACIX2021)
- CERAMIC AIRCRETE
- (GOLD MEDAL) GOLD | UTHM | UNIVERSITI |
| 2021 | HARI INOVASI & KREATIVITI NUKLEAR MALAYSIA (HIKNM 2021)
- "CERAMIC AIRCREATE"
- (Gold Award) GOLD | AGENSI NUKLEAR MALAYSIA | NEGARA |
| 2021 | EKSPO MAYA REKACIPTA & PAMERAN PENYELIDIKAN (e-REKA 2021) - "MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs)" - Special Award (Special Category Award-Chemical, Advanced Material & Plastic) | UNIMAP | UNIVERSITI |
| 2021 | EKSPO MAYA REKACIPTA & PAMERAN PENYELIDIKAN (e-REKA 2021)
- "MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs)"
- (Gold Medal) GOLD | UNIMAP | UNIVERSITI |
| 2021 | DIGITALISED INVENTION, INNOVATIN AND DESIGN JOHOR 2021 (DIIID JOHOR 2021)
- "MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs)"
(Gold Medal) GOLD | DIII JOHOR 2021 | ANTARABANGSA |
| 2021 | CREATION, INNOVATION, TECHNOLOGY & RESEARCH EXPOSITION 2021 - IPTA/IPTS/POLYTECHIC (CITREX 2021)
- CERAMIC AIRCRETE
- (GOLD) GOLD | UMP | UNIVERSITI |
| 2021 | CREATE, INNOVATION, TECHNOLOGY & RESEARCH EXPOSITION (CITREX 2021)
- "MUNICIPAL SOLID WASTE POLYMER COMPOSITES (M-PoCs)"
- (Gold Medal) GOLD | UMP | UNIVERSITI |
| 2021 | CREATE, INNOVATION, TECHNOLOGY & RESEARCH EXPOSITION (CITREX 2021)
- "CERAMIC AIRCRETE"
- (Gold Medal) GOLD | UMP | UNIVERSITI |
| 2020 | Malaysia Technology Expo 2020 (MTE2020)
- G CERAMIC AIRCRETE
-( SILVER AWARD) SILVER | MTE2020, KL | ANTARABANGSA |
| 2020 | International Research and Innovation Symposium and Exposition 2020 (RISE2020)
- Fundamental Research on Municipal Solid Waste Polymer Composites (M-PoCs)
-( GOLD AWARD) GOLD | UTHM | UNIVERSITI |
| 2020 | International Research and Innovation Symposium and Exposition 2020 (RISE2020)
- Fundamental Research on Municipal Solid Waste Polymer Composites (M-PoCs)
-( BEST OF THE BEST FOR FUNDAMENTAL STAF/IHL CATEGORY) BEST AWARD | UTHM | UNIVERSITI |
| 2019 | National Innovation & Invention Competition (NIICE2019)
- Recycled HDPE Acoustic Foam for Partition Wall Application
-( BRONZE AWARD) BRONZE | UTHM | UNIVERSITI |
| 2019 | International Research and Innovation Symposium and Exposition 2019 (RISE2019) - Green AAC Concrete of Ceramic Waste -( WINNER STAFF CATEGORY INNOVATIVE PRODUCT RESEARCH AWARD) | UTHM | UNIVERSITI |
| 2019 | International Research and Innovation Symposium and Exposition 2019 (RISE2019)
- Green AAC Concrete of Ceramic Waste
- ( GOLD AWARD) GOLD | UTHM | UNIVERSITI |
| 2019 | International Research and Innovation Symposium and Exposition 2019 (RISE2019)
- Recycled HDPE Acoustic Foam
-( GOLD AWARD) GOLD | UTHM | UNIVERSITI |
| 2019 | International Research and Innovation Symposium and Exposition 2019 (RISE2019)
- Eco-Flooring
- (SILVER AWARD) SILVER | UTHM | UNIVERSITI |
| 2019 | 2019 FTK RESEARCH & INNOVATION TECHNOLOGY COMPETITION (RITEC2019)
- RECYCLED HDPE ACOUSTIC FOAM
-(SILVER AWARD) SILVER | UTHM | UNIVERSITI |
| 2019 | 2019 FTK RESEARCH & INNOVATION TECHNOLOGY COMPETITION (RITEC2019)
- GreenConn: Autoclaved Aerated Concrete based Ceramic Waste
- GOLD AWARD GOLD | UTHM | UNIVERSITI |
| 2019 | 2019 FTK RESEARCH & INNOVATION TECHNOLOGY COMPETITION (RITEC2019)
- ECO- Impact Flooring
-(SILVER AWARD) SILVER | UTHM | UNIVERSITI |
| 2019 | National Innovation & Invention Competition (NIICE2019)
- Green AAC Concrete of Ceramic Waste - (GOLD AWARD) GOLD | UTHM | UNIVERSITI |
| 2019 | National Innovation & Invention Competition (NIICE2019)
- Eco Flooring of High-Density Polyethylene Plastic (HDPE) Waste
- (SILVER AWARD) SILVER | UTHM | UNIVERSITI |
| 2019 | International Conference and Exposition on Inventions by Institute of Higher Learning (Pecipta'19)
- Hydro Dyes
-( Silver Award) SILVER | UTHM | UNIVERSITI |
| 2018 | INTERNATIONAL RESEARCH AND INNOVATION SYMPOSIUM AND EXPOSITION 2018 (RISE2018)
- ECO-BAG BASED BANANA PEEL
-(SILVER AWAR) SILVER | UTHM | UNIVERSITI |
| 2018 | ANUGERAH PERKHIDMATAN CEMERLANG | UTHM | UNIVERSITI |
| 2015 | ANUGERAH PENERBITAN (CEMERLANG) | IMEN | UNIVERSITI |