Staff Profile
| Full Name | PROF. MADYA Ts. Dr. AINUN RAHMAHWATI BINTI AINUDDIN @ NORDIN |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN PEMBUATAN |
| Designation | DS54 - PROFESOR MADYA |
|
PENYELIDIK UTAMA NANO STRUCTURE AND SURFACE MODIFICATION (NANOSURF) FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN | |
|
PENYELIDIK BERSEKUTU PUSAT PENYELIDIKAN SHAMSUDDIN MIKROELEKTRONIK DAN NANOTEKNOLOGI (MINT-SRC) INSTITUT KEJURUTERAAN INTEGRASI | |
|
TIMBALAN PENGARAH (KAMPUS PAGOH) PEJABAT AM PEJABAT PERSEKITARAN, KESELAMATAN DAN KESIHATAN PEKERJAAN |
Field of Expertise
| Field Category (KPT) | MATERIAL SCIENCES |
|---|---|
| Field (KPT) | Functional Materials |
| Field of Specialization (KPT) | Coating |
Areas of Research Interest
| 1. | Thin films/coating Technology |
| 2. | Mechanical properties |
| 3. | Hybrid materials |
| 4. | Solar cell energy |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2012 | DOKTOR FALSAFAH BAHAN TERMAJU | TOYOHASHI UNIVERSITY OF TECHNOLOGY |
| 2001 | SARJANA KEJURUTERAAN BAHAN | UNIVERSITI SAINS MALAYSIA |
| 2000 | SARJANA MUDA KEJURUTERAAN BAHAN | UNIVERSITI SAINS MALAYSIA |
Professional Appointments
| DS54 - Profesor Madya |
Management Experience
| Date | Description |
|---|---|
| 01/03/2022 - 29/02/2024 | Timbalan Pengarah (Kampus Pagoh)
Pejabat Persekitaran, Keselamatan dan Kesihatan Pekerjaan |
| 02/05/2018 - 01/05/2023 | Penyelidik Bersekutu
Institut Kejuruteraan Integrasi, Pusat Penyelidikan Shamsuddin Mikroelektronik dan Nanoteknologi (MINT-SRC) |
| 01/01/2021 - 31/12/2022 | Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Nano Structure and Surface Modification (NanoSurf) |
| 01/03/2020 - 28/02/2022 | Timbalan Pengarah (Kampus Pagoh)
Pejabat Persekitaran, Keselamatan dan Kesihatan Pekerjaan |
| 01/01/2020 - 30/06/2021 | Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Nano Structure and Surface Modification (NanoSurf) |
| 01/03/2018 - 29/02/2020 | Ketua Unit Keselamatan Sinaran dan Kimia
Pejabat Persekitaran, Keselamatan dan Kesihatan Pekerjaan |
| 27/01/2019 - 30/01/2019 | Menjalankan Tugas (Pengarah)
Pejabat Canselori, Bahagian Persekitaran, Keselamatan dan Kesihatan Pekerjaan |
| 01/03/2016 - 28/02/2018 | Ketua Unit
Pejabat Canselori, Unit Keselamatan, Sinaran dan Kimia |
| 15/01/2016 - 31/12/2017 | Penyelidik Kanan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
| 01/01/2013 - 31/12/2013 | Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR) |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 06/03/2019 - 31/12/9999 | International Association of Engineers (IAENG)
| Ahli | Antarabangsa |
| 17/02/2020 - 31/12/2023 | Institute of Material Malaysia (IMM)
| Ahli | Kebangsaan |
| 01/01/2008 - 31/12/2016 | Malaysian Nuclear Society (MNS)
| Ahli | Kebangsaan |
| 04/12/2017 - 31/12/9999 | Persatuan Perlindungan Sinaran Malaysia (MARPA)
| Ahli | Kebangsaan |
| 28/04/2019 - 27/04/2021 | Malaysia Board of Technologists (MBOT)
| Teknologis Profesional | Kebangsaan |
| 27/04/2021 - 27/04/2022 | Malaysia Board of Technologists (MBOT)
| Teknologis Profesional | Kebangsaan |
| 05/03/2019 - 31/12/9999 | Malaysia Board of Technologists (MBOT)
| Teknologis Berijazah | Kebangsaan |
| 30/09/2005 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
| 28/04/2019 - 27/04/2020 | Malaysia Board of Technologists (MBOT)
| Teknologis Profesional | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2020 | PENGUJIAN BAHAN [BDB40203], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | PENGUJIAN BAHAN [BDB40203], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2019 | Materials Sciences [BDA 10803], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Materials Sciences [BDA 10803], Sesi 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | SAINS BAHAN [BDA10803], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | MAKMAL KEJURUTERAAN I [BDA17101], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2018 | Engineering Composites [CDB 10603], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Advanced Composite [MDB 10103], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Materials Sciences [BDA 10803], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Materials Sciences [BDA 10803], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2017 | Composites [BDB 40703], Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Materials Sciences [BNR 10102], Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2016 | Engineering Materials Selection [BDD 20402], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Materials Sciences [BNR 10102], Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Composite [BDB40703], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Engineering Laboraotry I [BDA17101], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Materials Testing [BDB40203], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Engineering Composites [CDB10603], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Advanced Composite [MDB 10103], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2014 | Materials Science [BDA10803], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Advanced Materials [BDB40803], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Materials Science [BDA10302], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Materials Science [BDA1602], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Advanced Ceramics [MDB10504], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2013 | Metodologi Penyelidikan [MDU10100], Sesi 20122013 Semester 2, Univeriti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Statics [BDA10203], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Advanced Composites [MDB10103], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Komposit [BDB40703], Sesi 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2012 | Advanced Composites [MDB10103], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Makmal Kejuruteraan II [BDA27001], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2008 | Pemilihan Bahan [BDA2042], sesi 20072008 Semester 2, Universiti Tun Hussein Onn Malaysia 2008 | University |
| 2008 | Pemilihan Bahan [BDA2042], sesi 20082009 Semester 1, Universiti Tun Hussein Onn Malaysia 2008 | University |
| 2007 | Mekanik Kejuruteraan [BKF1123], sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia 2007 | University |
| 2007 | Makmal Kejuruteraan Mekanikal II [BDA2701], sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia 2007 | University |
| 2007 | Sains Bahan [BDA1602], sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia 2007 | University |
| 2007 | Makmal Kejuruteraan Mekanikal I [DDA2711], sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia 2007 | University |
| 2007 | Pemilihan Bahan [BDA2042], sesi 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia 2007 | University |
| 2006 | Makmal Kejuruteraan I [ BDA1701], sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia 2006 | University |
| 2006 | Makmal Kejuruteraan I [DDA2711], sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia 2006 | University |
| 2006 | Sains Bahan [BDA1032], sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia 2006 | University |
| 2006 | Statik [BDA1023], sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia 2006 | University |
| 2006 | Sains Bahan [BDA1602], sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia 2006 | University |
| 2006 | Bahan Teknologi Kejuruteraan [DTM3013], sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia 2006 | University |
| 2005 | Makmal Kejuruteraan IV [BTM3701], sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Teknik Pengujian Bahan [BKM5643], sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Makmal Kejuruteraan II [BDA2701], sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Mekanik Pepejal [DKM2033], sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Makmal Kejuruteraan Mekanik III [DKM3151], sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Statik [BDA1023], sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Statik [DDA1013], sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2005 | Bahan Teknologi Kejuruteraan [DTM3013], sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia 2005 | University |
| 2004 | Makmal Kejuruteraan IV [BTM3701], sesi 20042005 Semester 1, Universiti Tun Hussein Onn Malaysia 2004 | University |
| 2004 | Statik dan Dinamik [BTM2033], sesi 20042005 Semester 1, Universiti Tun Hussein Onn Malaysia 2004 | University |
| 2004 | Statik Dinamik [DTM1103], sesi 20032004 Semester 2, Universiti Tun Hussein Onn Malaysia 2004 | University |
| 2004 | Makmal Kejuruteraan I [BTM1701], sesi 20032004 Semester 2, Universiti Tun Hussein Onn Malaysia 2004 | University |
| 2004 | Mekanik Pepejal I [BTM2032], sesi 20042005 Semester 1, Universiti Tun Hussein Onn Malaysia 2004 | University |
| 2003 | Statik Dinamik [BTM1013], sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2003 | Statik Dinamik I [BTM1013], sesi 20022003 Semester 3, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2003 | Sains Bahan [BKF1233], sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2003 | Statik dan Dinamik [DTM1103], sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2003 | Teknologi Bahan I [BTM2012], sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2003 | Makmal Kejuruteraan II [BTM2701], sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2003 | Statik dan Dinamik I [BTM2033], sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia 2003 | University |
| 2002 | Mekanik Kejuruteraan [BKF1123], sesi 20022003 Semester 1, Universiti Tun Hussein Onn Malaysia 2002 | University |
| 2002 | Mekanik Kejuruteraan [DTM1013], sesi 20012002 Semester 2, Universiti Tun Hussein Onn Malaysia, 2002 | University |
| 2002 | Makmal Kejuruteraan II [BKM2081], sesi 20012002 Semester 2, Universiti Tun Hussein Onn Malaysia 2002 | University |
| 2002 | Statik dan Dinamik I [BTM2033], sesi 20022003 Semester 1, Universiti Tun Hussein Onn Malaysia 2002 | University |
| 2002 | Makmal Kejuruteraan III [BKM3041], sesi 20012002 Semester 2, Universiti Tun Hussein Onn Malaysia 2002 | University |
| 2002 | Mekanik Kejuruteraan [BMM2034], sesi 20012002 Semester 2, Universiti Tun Hussein Onn Malaysia 2002 | University |
| 2002 | Teknologi Bahan [BTM3143], sesi 20022003 Semester 1, Universiti Tun Hussein Onn Malaysia 2002 | University |
Research Grants And Contracts
Publications
| Book |
|---|
| MUSLI NIZAM BIN YAHYA, MOHAMMAD KAMIL ABDULLAH, AINUN RAHMAHWATI AINUDDIN@NORDIN, SITI FATIMAH ZAHARAH MOHAMAD FUZI, 'AISHAH NAJWA ABD RAHMAN (2018) Keselamatan Dan Kesihatan Pekerjaan Di Universiti, UTHM , 1, ISBN:9789672183167 |
| Book Chapters |
| Altouhami Rasheed Abdulsalam Altouhami, Ainun Rahmahwati Ainuddin, Noor Yasmin Zainun, Ahmad Rizal Alias (2019) Green Building, Sustainable Construction And Building Technology, UTHM , 1, ISBN:9789672306733 |
| General Publications |
| Sustainable Campus Office (SCO) & Sustainable Champion Team (SIO 1-8) (2018) Uthm-Ui Greenmetric World University Ranking 2018 , UTHM , -, ISBN:- |
| Sustainable Campus Office (SCO) & Sustainable Champion Team (SIO 1-7) (2017) Uthm-Ui Greenmetric World University Ranking 2017, UTHM , -, ISBN:- |
| Ainun Rahmahwati Binti Ainuddin @ Nordin (2008) Engineering Materials Science (Bda 1032/Bda 1602), UTHM |
| Ainun Rahmahwati Binti Ainuddin @ Nordin (2007) Makmal Kejuruteraan Bahan, Pejabat penerbit UTHM |
| Journal |
| Nasha Emieza Ruhaizat, Ainun Rahmahwati Ainuddin, Zakiah Kamdi (2021) Experimental The Influence Of Growth Solution On Zinc Oxide Crystal Structures Via Hydrothermal Method, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 2, 222, ISSN:26007916 |
| Rosniza HUSSIN, Nur Syahraain ZULKIFLEE, Zakiah KAMDI, Ainun Rahmahwati AINUDDIN, Zawati HARUN and Mohamed Nasrul MOHAMED HATTA (2020) Photocatalytic Activity Of Bilayer Tio2/Zno And Zno Tio2 Thin Films, MATERIALS SCIENCE FORUM, SCIENTIFIC.NET , 9, 411, ISSN:16629752 |
| A.R. AINUDDIN, S.S.M. ISMAIL and N.A.YUSUF (2020) Tailoring Of Optical And Physical Properties Of Zno Films By Co-Doping Concentration, MATERIALS SCIENCE FORUM, TRANS TECH PUBLICATIONS LTD, SWITZERLAND , 9, 346, ISSN:16629752 |
| Alex Shee YIN NING1, Z. KAMDI, A. R. AINUDDIN, R. HUSSIN and S.A IBRAHIM (2020) Tungsten Carbide-Nickel (Wc-Ni) Coating As Potential Wear And Corrosion Protection For Metal, MATERIALS SCIENCE FORUM, SCIENTIFIC.NET , 9, 286, ISSN:16629752 |
| Raja Adibah Raja Ahmad , Zawati Harun , Mohd Hafiz Dzarfan Othman , Hatijah Basri , Muhamad Zaini Yunos , Azlinnorazia Ahmad , Siti Hajar Mohd Akhair , Abdul Qaiyyum Abd Rashid , Faiz Hafeez Azhar , Siti Salwa Alias , Ainun Rahmahwati Ainuddin (2019) Biosynthesis Of Zinc Oxide Nanoparticles By Using Fruits Extracts Of Ananas Comosus And Its Antibacterial Activity, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, Penerbit UTM Publication , 4, 268, ISSN:22895981 |
| Tijjani Abdullahi, Zawati Harun, Mohd Hafiz Dzarfan Othman, Khairul Nazri Yusof, Ainun Rahmawati, Muhamad Zaini Yunos, Mohd Amri Lajis, Yusri Yusof (2019) Preliminary Studies On Hydrothermal Synthesis Of Zeolite From Malaysian Kaolinite Clays, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, UTM press , 6, 78, ISSN:2289599X |
| Ibrahim, S.A., Anwar, M.K., Ainuddin, A.R., Hariri, A., Rus, A.Z.M., Kamdi, Z., Yunos, M.Z., Harun, Z. (2019) Synthesis And Characterization Of Visible Light Active Fe-Tio2 Using Hydrothermal Method, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 80, ISSN:2229-838 |
| Yogendren Nagarajan, Novin Kumar Vijayan, Ainun Rahmahwati Ainuddin, and Rosniza Hussin (2019) The Effect Of Ph Condition On Zinc Oxide Growth Fabrication Using Flexible Substrate , TEST ENGINEERING AND MANAGEMENT, THE MATTINGLEY PUBLISHING CO., INC. , 12, 741, ISSN:01934120 |
| M. Luqman Harith Abu Mansor, Rosniza Hussin, Zakiah Kamdi, Ainun Rahmahwati Ainuddin, Siti Aida Ibrahim, Mohamed Nasrul Mohamed Hatta, Muhamad Zaini Yunos (2018) Deposition And Characterization Of Cobalt Doped Titanium Dioxide Thin Films Using Sol-Gel Method, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 12, 61, ISSN:26007924 |
| Siti Aida Ibrahim, Abdul Hadi Zainal Alam, Rosniza Hussin, Zakiah Kamdi, Mohamed Nasrul Mohamed Hatta, Ainun Rahmahwati Ainuddin and Muhamad Zaini Yunos (2018) Effect Of Calcination Temperature On (N, Fe) Doped Tio2 Nanoparticles, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 6, 44, ISSN:22298460 |
| Zakiah Kamdi, Nur Azam Badarulzaman, Muhammad Adeeb Reezan Sukkeri, Muhammad Syafiq Hassan, Mohamed Nasrul Mohamed Hatta, Ainun Rahmahwati Ainuddin (2018) Evaluation Of Corrosion And Wear Behaviour Of Nickel Tungsten Carbide Electro-Deposited With Different Tungsten Carbide Concentration And Current Density, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 8, 38, ISSN:22298460 |
| Norlida Shaari, Azian Hariri, Nuur Azreen Paiman, Nurul Fitriah Nasir, Normayati Nordin, Ainun Rahmahwati Ainuddin, Norasikin Mat Isa (2018) Preliminary Reliability Study Of Computerized Neurobehavioural Test Method, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 10, 99, ISSN:2229838X |
| Ainun Rahmahwati Ainuddin, Wan Nur Amalina Mior Idris (2017) Characterization Of Zno Nanostructure Synthesized Through Hydrothermal Method, AIP CONFERENCE PROCEEDINGS, The American Institute of Physics , 12, 020022-1, ISSN:9780735415898 |
| Ainuddin, A.R. and Sulaiman, M.S. (2017) Effect Of Anodizing Voltage And Annealing Temperature On The Growth Of Titanium Dioxide Nanotube, AIP CONFERENCE PROCEEDINGS, American Institute of Physics Inc. , 4, 020035-1, ISSN:0094243X |
| Kamardin, I.L.K., Ainuddin, A.R. (2017) Growth Of Zno On Flexible Substrate Via Sol-Gel Hot Water Treatment, MATERIALS SCIENCE FORUM, Trans Tech Publications Ltd , 3, 338, ISSN:02555476 |
| Kamardin, I.L.K. and Ainuddin, A.R. (2017) Studies On Modification Of Zno Sol-Gel Spin Coated On Flexible Substrate At Low Temperature: Effect Of Time Exposure, AIP CONFERENCE PROCEEDINGS, American Institute of Physics Inc. , 4, 020033-1, ISSN:0094243X |
| M N M Hatta, M S Hashim, R Hussin, S Aida, Z Kamdi, AR Ainuddin and MZ Yunos (2017) Synthesis Of Carbon Nanostructures From High Density Polyethylene (Hdpe) And Polyethylene Terephthalate (Pet) Waste By Chemical Vapour Deposition , JOURNAL OF PHYSICS: CONFERENCE SERIES , IOP Publishing Ltd , 10, 1, ISSN:17426588 |
| Ainun Rahmahwati Ainuddin (2017) The Effect Of Water Bath Temperature During Electrochemical Deposition Of Zinc Oxide, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 12, 84, ISSN:22298460 |
| A.R. Ainuddin (2016) Growth Of Nanostuctured Zno Nanosheet On Ito/Pet Substrate Prepared Via Sol-Gel Spin Coating And Hot Water Treatment, MATERIALS SCIENCE FORUM, Trans Tech Publication Ltd , 1, 252, ISSN:16629752 |
| Ainuddin, A.R. , Idris, W.N.A.M. (2016) Growth Of Zno Nanostructures With Different Alkaline Precursor Solution, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7612, ISSN:18196608 |
| Ainuddin, A.R. , Aziz, N.A. (2016) Thermal Post-Treatment Of Tio2 Films Via Sol-Gel For Enhanced Corrosion Resistance, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 8698, ISSN:18196608 |
| A.R. Ainuddin (2015) Calcinations Effect On Growth Of Zinc Oxide Films Prepared Via Dip-Coating Technique, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 3, 374, ISSN:16628985 |
| A.R.Ainuddin (2015) Hydrothermal Synthesis Effect On Growth Of Zin Oxide Structure, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 10, 126, ISSN:16628985 |
| A.R. Ainuddin (2015) Studies On Effect Of Zinc Oxide (Zno) Nanostructures Morphology By Modification Of Sol-Gel Solution, ADVANCED MATERIALS RESEARCH, Trans Tech Publication , 10, 106, ISSN:16628985 |
| A.R.Ainuddin (2015) Study On Optimum Low Temperature For Zno Formation Via Hot Water Treatment, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 3, 272, ISSN:16628985 |
| Ainun Rahmahwati AINUDDIN, Tomonori ISHIGAKI, Norio HAKIRI, Hiroyuki MUTO, Mototsugu SAKAI and Atsunori MATSUDA (2012) Influence Of Uv Irradiation On Mechanical Properties And Structures Of Sol?Gel-Derived Vinylsilsesquioxane Films, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, The Ceramic Society of Japan , 10, 442, ISSN:13486535 |
| A. R. Ainuddin, N. Hakiri, H. Muto, and A. Matsuda (2012) Micropatterning Of Non-Crystalline Methylsilsesquioxane?Titania Hybrid Films Based On Their Structural Changes With Uv Irradiation, PHYSICA STATUS SOLIDI A : APPLICATIONS AND MATERIALS SCIENCE, Wiley-VCH Verlag , 12, 2034, ISSN:18626319 |
| Ainun Rahmahwati bt AINUDDIN, Norio HAKIRI, Hiroyuki MUTO, Mototsugu SAKAI and Atsunori MATSUDA (2011) Mechanical Properties Comparison Of Phenylsilsesquioxane? Methylsilsesquioxane Hybrid Films By Indentation, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, The Ceramic Society of Japan , 6, 490, ISSN:13486535 |
| Media Digital |
| Ainun Rahmahwati Ainuddin dan Zakiah Kamdi (2018) Materials Science, UTHM , ISBN:- |
| Prosiding / Seminar |
| Zaidi Malik, Siti Aida Ibrahim* , Ainun Rahmahwati Ainuddin, Rosniza Hussin and Zakiah Kamdi (2022) Comparative Study Of Fe,N-Tio2 Photocatalysts Under Uv Light Irradiation , TRANS TECH PUBLICATIONS LTD , 406, ISBN:16629795 |
| Kamdi Zakiah, Ainun Rahmahwati Ainuddin, Mohamed Nasrul Mohamed Hatta (2022) Effect Of Spherical Tungsten Carbide Load To The Corrosion Behaviour Of Plasma Transfer Arc Hard Facing In Acidic And Alkaline Environment, TRANS TECH PUBLICATIONS LTD, SWITZERLAND , 563, ISBN:16629795 |
| R.Hussin* M.H Razali, A. R. Ainuddin2c , Z.Kamdi, S.A Ibrahim and Z. Harun (2022) Green Synthesis Of Nanostructured Zinc Oxide (Zno) - Titanium Dioxide (Tio2) Thin Films, TRANS TECH PUBLICATIONS LTD, SWITZERLAND , 570, ISBN:16629795 |
| AINUN RAHMAHWATI Ainuddin, SITI SARAH MOHD Ismail, ZAKIAH Kamdi, ROSNIZA Hussin and SITI AIDA Ibrahim (2022) Growth Of Nanostructured Zinc Oxide On Flexible Conductive Substrate: A Review , TRANS TECH PUBLICATIONS LTD, SWITZERLAND , 271, ISBN:16629795 |
| Adnan A. Alshaer, Ainun Rahmahwati and Ramzi Qasem (2021) Biosynthesis Of Zinc Oxide Microparticles By Using Palm Oil Leaves Extract, IEEE , 79, ISBN:9781665412247 |
| R Hussin, S Z S Anuar2 , S A Ibharim Z Kamdi, A R Ainuddin and Z Harun (2021) Deposition Of Zno-Al (Azo) Thin Films For Optical Properties, AIP CONFERENCE PROCEEDINGS , 020198-1, ISBN:9780735440913 |
| Hui Ling Teoh, Siti Aida Ibrahim, Ainun Rahmahwati Ainuddin, Rosniza Hussin, and Zakiah Kamdi (2021) Preparation Of Composite Banana Peel-Tio2 For Methyl Orange Dyes Removal, IOP PUBLISHING , 012030, ISBN:17426596 |
| Ahmad Zaki Pengeran Najib, Z.Kamdi, Mohd Affifudin Abdul Patar, M.N.MHatta, M.Z.Yunos, A.R.Ainuddin (2020) Corrosion Behaviour Of Wc-Ni High Velocity Oxy-Fuel (Hvof) Coating With The Influence Of Spraying Parameter, ELSEVIER , 100, ISBN:22147853 |
| Z. Kamdi, A. R. Ainuddin, R. Hussin, and S. A. Ibrahim (2019) Corrosion Behavior Of Tungsten Carbide-Nickel Weld-Overlay, AMERICAN INSTITUTE OF PHYSICS INC. , 020098-1, ISBN:9780735417960 |
| Siti Sarah Mohd Ismail and Ainun Rahmahwati Ainuddin (2019) Effect Of Annealing Temperature On The Properties Of Transition Metal Doped Zinc Oxide ? A Review, AMERICAN INSTITUTE OF PHYSICS INC. , 020101-1, ISBN:9780735417960 |
| Ainun Rahmahwati Ainuddin, Kuganesawaran a/l Kalidasan, Zakiah Kamdi, Siti Aida Ibrahim, Rosniza Hussin and Thuwaibah Mohd Junaid (2019) The Effect Of Zinc Oxide Nanostructure On The Antibacterial Activity, AMERICAN INSTITUTE OF PHYSICS INC. , 020094-1, ISBN:9780735417960 |
| A R Ainuddin, M Z Yup, Z Kamdi, R Hussin and S A Ibrahim, (2018) Effects Of Ag Dopant And Ultraviolet Irradiation On Structural Properties Of Zinc Oxide Nanostructures, AMERICAN INSTITUTE OF PHYSICS , 020071 -1, ISBN:9780735417717 |
| Ainun Rahmahwati Binti Ainuddin @ Nordin (2006) Development Of Sic/Zeolite Porous Ceramic |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2007 | Academic Consultant for Certificate and Diploma Program, Institut Kemahiran Belia Negara (IKBN) Temerloh, Pahang, 2007 | Government |
Supervision
| Year | Description | Role |
|---|---|---|
| 2020 | Examiner for Thesis : Aina Syazwana binti Zulkefli (2020): Effect of Operating Parameter on Membrane Distillation Performance using Ceiba Pentandra for Humic Acid Treatment | Examiner |
| 2020 | Examiner for Thesis : Siti Norhana binti Selamat (2020) | Examiner |
| 2020 | Supervisor for Muhammad Yusup bin Abd Latip, B. Mech Eng, UTHM, 2020 | Supervisor |
| 2020 | Supervisor for Muhammad Nur Asry Ashraf bin Hasbullah, B. Mech Eng, UTHM, 2020 | Supervisor |
| 2020 | Supervisor for Che Muhamad Azmin bin Che Abdullahi, B. Mech Eng, UTHM, 2020 | Supervisor |
| 2020 | Supervisor for Mohd Hafiz bin Razali, B. Mech Eng, UTHM, 2020 | Supervisor |
| 2019 | Supervisor for Novinkumar a/l Vuayan, B. Mech Eng, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Yogendren a/l Nagarajan, B. Mech Eng, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Norsaidatul Azwa binti Yusuf, B. Mech Eng, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Nasha Emieza binti Ruhaizat, M. Sc. (Material Eng), UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Mohd Azuddin Firdaus bin Azlan, B. Mech Eng, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Siti Sarah Binti Mohd Ismail, Ms. Mech Eng, UTHM, 2019 | Supervisor |
| 2018 | Examiner for Thesis : Mohd Faiz Hafeez Bin Azhar (2018): The Effect on Characteristic and Performance of Flower-like Titania Towards PSF Mixed Matrix Membrane | Examiner |
| 2018 | Supervisor for Syamir Aliff bin Muhamad Sakri, B. Mech Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Najeerah binti Omar, B. Mech Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Sakthivell a/l Suresh, B. Mech Eng, UTHM, 2018 | Supervisor |
| 2018 | Examiner for Thesis : Anis Zafirah binti Mohd Ismail (2018): The Effect of Annealing Treatment on Homojuction Cu2O Thin Film Fabrication | Examiner |
| 2018 | Co-Supervisor for Nor Azimah Binti Mustaffa, Ms. Mech Eng, UTHM, 2018 | Supervisor |
| 2018 | Co-Supervisor for Azlinnorazia binti Ahmad, Ms. Mech Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Kuganesawaran A/L Kalidasan, B. Mech Eng, UTHM, 2018 | Supervisor |
| 2017 | Supervisor for AMIRUL AZRUL BIN MD IDRUS , B. Mech Eng, UTHM, 2017 | Supervisor |
| 2017 | Examiner for Thesis : Fatin Izyani Binti Mohamad Yahya (2017): Fabrication Of Titanium Dioxide Thin Film Prepared By Spray Pyrolsis Deposition Method For Dye-Sensitized Solat Cell | Examiner |
| 2017 | Supervisor for MUHAMMAD AMIRUDDIN BIN JANI, Ms. Mech Eng, UTHM, 2017 | Supervisor |
| 2017 | Supervisor for SWEN RAJ , B. Mech Eng, UTHM, 2017 | Supervisor |
| 2017 | Supervisor for MOHAMAD ZULFADLI YUP, B. Mech Eng, UTHM, 2017 | Supervisor |
| 2016 | Supervisor for MUHAMMAD FAIQ BIN AHMAD SIAAIMI , B. Mech Eng, UTHM, 2016 | Supervisor |
| 2016 | Supervisor for Mohd Amirul Ashraf Bin Darus, B. Mech Eng, UTHM, 2016 | Supervisor |
| 2016 | Supervisor for NOR SUHAIDAH BINTI ABDUL RAHIM , B. Mech Eng, UTHM, 2016 | Supervisor |
| 2016 | Supervisor for Nurul Syahira Binti Ismail, B. Mech Eng, UTHM, 2016 | Supervisor |
| 2015 | Supervisor for MUHAMMAD BIN NGAH, B.Mech Eng, UTHM, 2015 | Supervisor |
| 2015 | Supervisor for MUHAMMAD HAIZAT BIN HARUN, B.Mech Eng, UTHM, 2015 | Supervisor |
| 2015 | Supervisor for Norhaslina Abdul Aziz, Ms. Mech Eng, UTHM, 2015 | Supervisor |
| 2015 | Supervisor for AHMAD FADZLY BIN AHMAD FUAD, B.Mech Eng, UTHM, 2015 | Supervisor |
| 2015 | Supervisor for WAN NUR AMALINA BINTI MIOR IDRIS, Ms. Mech Eng, UTHM, 2015 | Supervisor |
| 2014 | Supervisor for Sofiana Ayu Bt Abd Rahman, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Ahmed Hibry Fathi Bin Ahmed Fathi, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Mohd Akmal Shafiee bin Abd Rahman, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Hemrul Edeeza bin Ghazali, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Mohammad Syazwan bin Sulaiman, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Mohamad Ariff Izwan bin Moid, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Muhamad Faiz bin Muhamad @ Ramli, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Muhammad Firdaus bin Hashim, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Supervisor for Fathul Zahara binti Razali, B.Mech Eng, UTHM, 2014 | Supervisor |
| 2014 | Examiner for Thesis : Mohd Riduan bin Jamaluddin (2014): Enhancement of Antifouling Properties using Silica (RHS) Particles in Polysulfone Membrane and Optimization of Its Operating Condition | Examiner |
| 2013 | Supervisor for Jerry Sualeh, B.Mech Eng, UTHM, 2013 | Supervisor |
| 2013 | Supervisor for Chien Chee Wei, B.Mech Eng, UTHM, 2013 | Supervisor |
| 2013 | Supervisor for Rabeatul Adawiyah Rosley, B.Mech Eng, UTHM, 2013 | Supervisor |
| 2013 | Supervisor for Ili Liyana Khairunisa bt Kamardin, B.Mech Eng, UTHM, 2013 | Supervisor |
| 2008 | Supervisor for MOHAMAD FATKHI BIN MASHURI, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2008 | Supervisor |
| 2008 | Supervisor for NIK MOHD HISYAM BIN YUSOFF, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2008 | Supervisor |
| 2008 | Supervisor for MUHAMAD ZUKI BIN ABDUL KADIR, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2008 | Supervisor |
| 2008 | Supervisor for MOHD ZAKI BIN ABD JALIL, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2008 | Supervisor |
| 2008 | Supervisor for MOHAMAD AZRIL BIN ABDUL JALIL, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2008 | Supervisor |
| 2008 | Supervisor for TAHRIN BIN OTHMAN, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2008 | Supervisor |
| 2006 | Supervisor for Mohd Fairuz bin Modi, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2006 | Supervisor |
| 2006 | Supervisor for Lai Foke Soon, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2006 | Supervisor |
| 2006 | Supervisor for Shahrun Nizam B. Ab. Munir, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2006 | Supervisor |
| 2006 | Supervisor for Shee Han Lin, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2006 | Supervisor |
| 2006 | Supervisor for Abdul Rouf bin Ruslan, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2006 | Supervisor |
| 2005 | Supervisor for Mohd Razuan bin Mohamed Sari, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Mohd Razif bin Hj Razali, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Co-supervisor for Ahmad Huzairi Bin Baharuddin, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Mohd Hairunnizam bin Sapari, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Mohd Zaky bin Saruji, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Mohd Sapuwan b Abu Bakar, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Malini Kushna, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Ainull Najhwar bt Abdul Razak , B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Supervisor for Mohd Fadhil b Musa, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2005 | Co-supervisor for Mohamad Bakri bin Othman, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2005 | Supervisor |
| 2004 | Co-supervisor for Noor Rafidah bt Md Osman, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2004 | Supervisor |
| 2004 | Supervisor for Mohd Ayasir bin Jamaludin, B.Mech Eng., Universiti Tun Hussein Onn Malaysia 2004 | Supervisor |
Courses & Training
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2022 | BENGKEL PELAN TINDAKAN KECEMASAN (EMERGENCY RESPONSE PLAN - ERP) UTHM SIRI 5 UTHM / BAYVIEW HOTEL, MELAKA | 14/07/2022 - 16/07/2022 |
| 2022 | SEMINAR RESEARCH VISIBILITY AND SECURING INTERNATIONAL GRANT FKMP,UTHM / Bilik Latihan Sri Siantan, Aras 3, Pejabat Pendaftar | 08/06/2022 |
| 2022 | SIRAC (SIMPLE RISK ASSESSMENT AND CONTROL FOR CHEMICAL) OSHE UTHM / BILIK LATIHAN PEJABAT PENDAFTAR | 16/05/2022 - 19/05/2022 |
| 2022 | KESEDARAN DAN TANGGUNGJAWAB KITA TERHADAP PEMERIKSAAN TEMPAT KERJA (PTK) FKMP,UTHM / Zoom Webinar | 27/04/2022 |
| 2022 | RADIATION PROTECTION CONFERENCE & WORKSHOP (RPOCW) 2022 MARPA / KUALA TERENGGANU, TERENGGANU | 07/03/2022 - 10/03/2022 |
| 2022 | SEMINAR MENCIPTA KEBAHAGIAAN KERJAYA DAN KELUARGA BERSAMA USTAZ SYAMSUL DEBAT PEJABAT PENDAFTAR,UTHM / GOOGLE MEET | 02/03/2022 |
| 2022 | TAKLIMAT AUDIT FAKULTI MYRA BAGI TAHUN 2021, FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN (FKMP) SECARA ATAS TALIAN FKMP,UTHM / ZOOM | 24/02/2022 |
| 2022 | BENGKEL PEMBANGUNAN EMERGENCY RESPONSE PLAN (ERP) UTHM / BILIK LESTARI 2, ARAS 3, PTTA | 14/02/2022 |
| 2021 | WEBINAR INTEGRITI ETIKA KERJA BERKAITAN PERANAN PENYELIA PEJABAT PENDAFTAR,UTHM / GOOGLE MEET | 06/12/2021 |
| 2021 | LATIHAN ASAS PENGENDALIAN BAHAN KIMIA FKMP,UTHM / ZOOM WEBINAR | 06/10/2021 |
| 2021 | WEBINAR : SESI PERKONGSIAN SEMPENA KEMPEN PENANAMAN POKOK BERKAYU UTHM FASA 1 - KEHIJAUAN KEDIAMAN GAYA LELAKI UTHM / GOOGLE MEET | 28/09/2021 |
| 2021 | KURSUS SISTEM AUTHOR UTHM / Secara dalam talian: Zoom Meeting | 22/09/2021 |
| 2021 | ICON TALK - MENDEPANI DAN MEMERANGI KRISIS DEMI KELANGSUNGAN NEGARA : RASUAH, COVID-19 & EKONOMI BERSAMA YBHG. DATO' DR. HUSSAMUDDIN HJ YAACUB, PENGERUSI KUMPULAN MEDIA KARANGKRAF UTHM / APLIKASI ZOOM | 04/08/2021 |
| 2021 | WEBINAR 'TURNITIN TRAINING FOR LECTURERS' UTHM / Pautan Zoom: https://uthm-edu-my.zoom.us/j/92180268841 Meeting ID: 921 8026 8841 | 29/06/2021 |
| 2021 | KOLOKIUM PENYELIDIKAN SEM 2 SESI 2020/2021 UTHM / google meet platform | 13/06/2021 - 15/06/2021 |
| 2021 | 'DUE DILIGENCE' KEPENTINGANNYA DALAM MENJAUHI RASUAH UTHM / ZOOM | 27/05/2021 |
| 2021 | KURSUS ASAS SLO UTHM / Google Meet | 11/04/2021 - 12/04/2021 |
| 2021 | BENGKEL JK PENGURUSAN BAHAN KIMIA UNIVERSITI UTHM / Bilik Seminar Lestari 1, Aras 3, Bangunan PTTA | 06/04/2021 - 07/04/2021 |
| 2021 | KURSUS PEMBANGUNAN MOOC SIRI 1/2021 UTHM / SECARA ONLINE ZOOM MEETING | 03/03/2021 |
| 2021 | WEBINAR SUKAN UTHM 2021 SIRI 1/2021 : INSPIRASI KEJAYAAN BERSAMA TOKOH SUKAN NEGARA SHALIN ZULKIFLI UTHM / SALURAN YOUTUBE UTHM | 24/02/2021 |
| 2021 | PERKONGSIAN PENGURUSAN BAHAN KIMIA DI UTM (CRADLE TO GRAVE) UTHM / Secara Atas Talian - Google Meet | 16/02/2021 |
| 2021 | SESI PERKONGSIAN PENGURUS BAHAN KIMIA FKAAB UTHM / Secara Atas Talian - Google Meet | 15/02/2021 |
| 2021 | JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN PEJABAT PENDAFTAR,UTHM / GOOGLE MEET | 05/01/2021 |
| 2020 | TIPS DAN APLIKASI DAN PEMBANGUNAN SOALAN BERARAS TINGGI (OPEN-ENDED QUESTION) UTHM / - | 15/11/2020 |
| 2020 | KURSUS PENGURUSAN, PERANCANGAN DAN PEMIKIRAN STRATEGIK PEJABAT PENDAFTAR,UTHM / BILIK LATIHAN SERI TERATAI, ARAS 1 PEJABAT PENDAFTAR. | 12/10/2020 - 13/10/2020 |
| 2020 | WORK EFFICIENTLY WITH POWERPOINT 365 (REPEAT) UTHM / PUSAT PEMBELAJARAN ATAS TALIAN TAHAP GLOBAL | 07/10/2020 |
| 2020 | TAKLIMAT KESELAMATAN SINARAN MENGION FAST UTHM / GOOGLE MEET | 10/09/2020 |
| 2020 | SCREENCASTING USING LOOM UTHM / PUSAT PEMBELAJARAN ATAS TALIAN TAHAP GLOBAL | 19/08/2020 |
| 2020 | TAKLIMAT PENYEDIAAN MOOC-PLATFORM OPEN LEARNING UTHM / - | 13/08/2020 |
| 2020 | KURSUS MENDEPANI CABARAN DI TEMPAT KERJA (ATAS TALIAN) UTHM / BILIK LATIHAN SERI TERATAI | 14/07/2020 |
| 2020 | SCREENCAST FOR BEGINNERS (REPEAT SESSION) UTHM / - | 06/07/2020 |
| 2020 | MARKING MADE EASY (ADVANCED) UTHM / - | 02/07/2020 |
| 2020 | HAVE FUN WITH POWTOON UTHM / - | 30/06/2020 |
| 2020 | INTERMEDIATE MICROSOFT EXCEL SIRI 2 PEJABAT PENDAFTAR,UTHM / GOOGLE MEET @ GOOGLE CLASSROOM | 23/06/2020 |
| 2020 | MARKING MADE EASY (BEGINNER) UTHM / - | 15/06/2020 |
| 2020 | KURSUS PENGURUSAN MAJLIS BERPRESTIJ & BERTARAF PROFESIONAL UTHM / GOOGLE MEET DAN FACEBOOK LIVE | 20/05/2020 |
| 2020 | KURSUS PENGURUSAN MAJLIS BERPRESTIJ DAN BERTARAF PROFESIONAL UTHM HOLDINGS / GOOGLE MEET | 20/05/2020 |
| 2020 | GOOGLE CLASSROOM FOR FOC IN 3 SIMPLE STEP (REPEAT SESSION) UTHM / - | 13/05/2020 |
| 2020 | KULIAH RAMADAN : RAMADAN, AL-QURAN DAN ANDA UTHM / UTHM | 12/05/2020 |
| 2020 | MAJLIS PERJUMPAAN PAGI BERSAMA YBHG. NAIB CANSELOR UTHM / - | 05/03/2020 |
| 2020 | UTHM GERMAN DAY 2020 UTHM / UTHM | 19/02/2020 |
| 2020 | SEMINAR TEACHING FOR MEANINGFUL LEARNING UTHM PUSAT PEMBANGUNAN AKADEMIK, UTHM / UTHM | 20/01/2020 |
| 2020 | PROGRAM JERAYAWARA SESI 1/2020 UTHM / BILIK MESYUARAT PERDANA, PEJABAT AM PPP | 19/01/2020 |