Staff Profile
Full Name | PROF. MADYA Dr. AHMAD JAIS BIN ALIMIN |
---|---|
Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Department | JABATAN KEJURUTERAAN MEKANIKAL |
Designation | DS54 - PROFESOR MADYA |
Field of Expertise
Field Category (KPT) | ENGINEERING AND TECHNOLOGY |
---|---|
Field (KPT) | Automotive Engineering |
Field of Specialization (KPT) | Emission Control |
Areas of Research Interest
1. | Small Engine Technology |
2. | Retrofitting Technology |
3. | Emissions and Air Pollution Control |
4. | Solar chimney and fresh water plant |
5. | Technopreneurship |
Innovation Field of Interest
1. | Retrofit Fuel Injection System |
2. | Technopreneurship |
3. | Renewable energy application |
4. | Motorcycles and riders |
Academic Qualification
Year | Qualification | Institution |
---|---|---|
2006 | DOKTOR FALSAFAH AUTOMOTIF | CONVENTRY UNIVERSITY |
2002 | SARJANA KEJURUTERAAN MEKANIKAL | UNIVERSITI TEKNOLOGI MALAYSIA |
1998 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | IMPERIAL COLLEGE LONDON |
Professional Appointments
DS54 - Profesor Madya |
Management Experience
Date | Description |
---|---|
01/01/2020 - 30/06/2021 | Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Automotive Research Group |
01/01/2019 - 31/12/2019 | Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Automotive Research Group |
01/01/2017 - 31/12/2018 | Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Automotive Research Group |
01/02/2014 - 15/04/2015 | Timbalan Dekan (Hal Ehwal Pelajar, Pembangunan & Penerbitan)
Pusat Pengajian Siswazah |
01/01/2012 - 31/12/2013 | Timbalan Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan |
01/07/2011 - 31/12/2011 | Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Tenaga dan Termobendalir (JKT) |
01/09/2009 - 30/06/2011 | Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Tenaga dan Termobendalir (JKT) |
15/08/2008 - 31/08/2009 | Pemangku Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Tenaga dan Termobendalir (JKT) |
Professional Societies
Year | Description | Role | Level |
---|---|---|---|
01/08/2016 - 31/12/2021 | Society of Automotive Engineers (SAE International)
| AHLI | Antarabangsa |
26/12/2020 - 31/12/9999 | International Association Of Engineers (IAENG) - Society Of Industrial Engineering
| AHLI | Antarabangsa |
15/10/2008 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Teaching Experience
Year | Description | Level |
---|---|---|
2021 | PENDORONG AUTOMOTIF [BDE41003], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
2021 | EKONOMI TENAGA [MDL10303], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
2021 | TERMOBENDALIR [BDX20203], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
2021 | TERMODINAMIK II [BDA30403], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
2021 | EKONOMI TENAGA [MDL10303], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
2020 | EKONOMI TENAGA [MDL10303], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
2020 | ENJIN PEMBAKARAN DALAM [BDE40603], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
2020 | TERMODINAMIK II [BDA30403], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
2020 | TERMODINAMIK II [BDA30403], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 | University |
2019 | Internal Combustion Engines (BDE40603), Sesi 2019/2020, Semester 1, UTHM, 2019 | University |
2019 | Makmal Kejuruteraan V (BDA37201), Sesi 2018/2019, Semester 2, UTHM, 2019 | University |
2019 | Makmal Kejuruteraan V (BDA37201), Sesi 2019/2020, Semester 1, UTHM, 2019 | University |
2019 | Energy Economics (MDL10303), Sesi 2019/2020, Semester 1, UTHM, 2019 | University |
2019 | Termodinamik II (BDA30403), Sesi 2018/2019, Semester 2, 2019 | University |
2018 | Research Methodology (MDC10100), Session 2018/2019, Semester 1, UTHM, 2018 | University |
2018 | Termodinamik II (BDA30403), Sesi 2018/2019, Semester 1, UTHM, 2018 | University |
2018 | Combustion Engineering (MDT10503), Sesi 2017/2018, Semester 2, UTHM, 2018 | University |
2018 | Termodinamik II (BDA30403), Sesi 2017/2018, Semester 2, UTHM, 2018 | University |
2017 | Towards Zero Emissions Transports - Short Course, 16-23rd August 2017, Veltech Dr. RR & Dr. SR University, Chennai, India | International |
2017 | Termodinamik II (BDA30403), Sesi 2016/2017, Semester 2, 2017 | University |
2017 | Internal Combustion Engine (BDE40603), Sesi 2017/2018, Semester 1, UTHM, 2017 | University |
2016 | Internal Combustion Engines (BDE40603), Sesi 2016/2017, Semester 1, UTHM, 2016 | University |
2016 | Termodinamik (BDA20703), Sesi 2016/2017, Semester 1, UTHM, 2016 | University |
2013 | Combustion Engineering (MDT10504), Session 2013/2014, Semester 1, UTHM, 2013 | University |
2013 | Combustion Engineering (MDT10504), Session 2012/2013, Semester 2, UTHM, 2013 | University |
2012 | Combustion Engineering (MDT10504), Sesi 2011/2012, Semester 2, UTHM, 2012 | University |
2012 | Energy Study and Management (MDT10404), Session 2012/2013, Semester 1, UTHM, 2012 | University |
2011 | Combustion Engineering (MDT10504), Sesi 2010/2011, Semester 2, UTHM, 2011 | University |
2011 | Research Methodology (MDU10100), Sesi 2010/2011, Semester 2, UTHM, 2011 | University |
2011 | Internal Combustion Engine (BDE4063), Sesi 2011/2012, Semester 1, UTHM, 2011 | University |
2011 | Combustion Engineering (MDT10504), Sesi 2011/2012, Semester 1, UTHM, 2011 | University |
2011 | Internal Combustion Engine (BDE4063), Sesi 2010/2011, Semester 2, UTHM, 2011 | University |
2011 | Energy Study and Management (MDT10404), Sesi 2011/2012, Semester 1, UTHM, 2011 | University |
2010 | Combustion Engineering (MKM2104), Sesi 2010/2011, Semester 1, UTHM, 2010 | University |
2010 | Internal Combustion Engine (DDE2073), Sesi 2010/2011, Semester 1, UTHM, 2010 | University |
2010 | Termodinamik (BDA1612), Sesi 2009/2010, Semester 2, UTHM, 2010 | University |
2010 | Advanced Fluid Dynamics (MKM2303), Sesi 209/2010, Sesi 2, UTHM, 2010 | University |
2010 | Internal Combustion Engine (BDE4063), Sesi 2010/2011, Semester 1, UTHM, 2010 | University |
2009 | Combustion Engineering (MKM2104), Sesi 2009/2010, Semester 1, UTHM, 2009 | University |
2009 | Advanced Fluid Dynamics (MKM2303), Sesi 2009/2010, Semester 1, UTHM, 2009 | University |
2009 | Termodinamik (DDA2033), Sesi 2009/2010, Semester 1, UTHM, 2009 | University |
2008 | Termodinamik (BDA1612) Sesi 20072008, Semester 2, UTHM, 2008 | University |
2008 | Termodinamik (DDA2033), Sesi 2008/2009, Semester 1, UTHM, 2008 | University |
2007 | Mekanik Bendalir (DDA3033), Sesi 20072008, Semester 1, UTHM, 2007 | University |
2007 | Termodinamik (DDA2033), Sesi 20062007, Semester 3, UTHM, 2007 | University |
2007 | Makmal Kejuruteraan IV (BDA2721), Sesi 20062007, Semester 2, UTHM, 2007 | University |
2007 | Termodinamik (BDA2022), Sesi 20062007, Semester 2, UTHM, 2007 | University |
Research Grants And Contracts
Publications
Book |
---|
Normayati Nordin, Ishkrizat Taib, Mas Fawzi Mohd Ali, Ahmad Jais Alimin, Mohd Fadhli Zulkafli, Akmal Nizam Mohammed, Norasikin Mat Isa, Azmahani Sadikin, Sofian Mohd, Amir Khalid, Mohd Faizal Mohideen Batcha (2017) 2nd International Conference On Computational Fluid Dynamics In Research And Industry (Cfdri 2017): Proceedings , IOP Publishing Ltd , 011001, ISBN:1757-899X |
Book Chapters |
AHMAD JAIS ALIMIN (2021) The Return, The New Normal: Heart Talks, UTHM , 114, ISBN:9789672975380 |
Md Norrizam Mohmad Jaat, Ahmad Jais Alimin, Amir Khalid, Hamidon Salleh, Bukhari Manshoor, Mas Fawzi Mohd Ali, Md Nor Anuar Mohammad1 & Muhammad Yusri Ismail (2017) A New Approach In Exploration The Air Entrainment, Endothermic And Heat Recovery Process Of Bio-Diesel Ignition, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 2, UTHM , 31, ISBN:9789670764962 |
Norrizam Jaat, Amir Khalid, Ahmad Jais Alimin, Hamidon Salleh, Bukhari Manshoor, Md Anuar Mohammad and Mas Fawzi (2017) A New Approach In Exploration The Air Entrainment, Endothermic And Heat Recovery Process Of Biodiesel Ignition, Experiments And Simulations Burner Combustion, UTHM , 33, ISBN:978-967-0764-82-5 |
Mas Fazwi Mohd Ali, Azhar Abdul Aziz, Ahmad Jais Alimin, Amir Khalid, Mohd Faizal Mohideen Batcha (2017) Combustion Studies Of Hydrated And Anhydrous Ethanol-Gasoline Blend In A Variable-Volume Chamber, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 1, UTHM , 45, ISBN:9789670764955 |
Amir Khalid, Ahmad Jais Alimin, Norrizal Mustaffa (2017) Development Of Constant Volume Chamber And High Injection Pressure System For Bio-Diesel Combustion, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 3, UTHM , 117, ISBN:9789672110095 |
Bukhari Manshoor, Ahmad Jais Alimin1 , Amir Khalid, Mas Fazwi Mohd Ali, Norassikin Mat Isa, Izzudin Zaman, Mohamad Farid Seis (2017) Effect Of Fractal-Grid Generated Turbulence On The Structure Of Premixed Flames For Low Pollutant Emissions In Combustion, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 1, UTHM , 13, ISBN:9789670764955 |
Mohd Azahari Razali, Ahmad Jais Alimin, Mas Fazwi Mohd Ali, Amir Khalid, Azwan Sapit, Bukhari Manshoor, Faisal Hushim, Akmal Nizam Mohamed (2017) Exploration The Effect Of Particle Size In Thermophoresis Phenomenon Under Microgravity Environment, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 1, UTHM , 35, ISBN:9789670764955 |
Amir Khalid, Abas Abdul Wahab, Ahmad Jais Alimin, Affirul Chairil Ariffin, Rosli Omar, Bukhari Manshoor, Shahrin Hisham Amirnordin, Norrizal Mustafa (2017) Exploration The New Concept Of Mixture Formation During Early Stage Of Burning Process In Bio-Diesel Combustion, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 1, UTHM , 1, ISBN:9789670764955 |
Amir Khalid, Ahmad Jais Alimin, Mohamad Yusof Idroas, Bukhari Manshoor, Mas Fawzi Md Ali, Norasikin Mat Isa, Shahrin Hisham Amirnordin (2017) New Concept Of Micro-Explosion And Rapid Premixing Of Water-Fuel Emulsion In Bio-Diesel Combustion, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 2, UTHM , 17, ISBN:9789670764962 |
Amir Khalid, Norrizal Mustaffa, B. Manshoor, Hanis Zakaria, Ahmad Jais Alimin, Mutalib Leman, A. Sadikin (2017) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, Experiments And Simulations Burner Combustion, UTHM , 33, ISBN:9789670764825 |
General Publications |
Dr. RAIS HANIZAM BIN MADON, Dr. HAMIDON BIN SALLEH, Dr. MOHD AZAHARI BIN RAZALI, Dr. MOHD FAISAL BIN HUSHIM, PROF. MADYA Dr. SHAHRUL AZMIR BIN OSMAN, PROF. MADYA Dr. AHMAD JAIS BIN ALIMIN, ENCIK MZAHAR BIN ABD. JALAL, (2020) Sop Of Mobile Disinfection Chamber, UTHM , -, ISBN:- |
Assoc. Prof. Dr. Shahrul Azmir bin Osman, Assoc. Prof. Dr. Ahmad Jais bin Alimin, Mzahar bin Abd Jalal (2020) Specifications And Wiring Diagram For Retrofitted Medium Duty Compression Ignition Engine (C.I.) Fuelled With Compressed Natural Gas (Cng) Test Rig, UTHM , 1, ISBN:- |
Dr. Rais Hanizam bin Madon, Dr. Balkis binti Haji A.Talip, Tc. MZahar bin Abd Jalal, Dr Mohd Azahari bin Razali, Dr. Hamidon bin Salleh, Dr. Mohd Faisal bin Hushim, Prof Madya Dr. Ahmad Jais Alimin, Prof. Madya Ts. Dr. Saifulnizan bin Jamian, En. Muhamad Khairul Ilman Sarwani , En. Muhamad Muizzuddin bin Abdul Kadir. (2020) Standard Operating Procedure Of Mobile Covid19 Sample Collection Cubicle, UTHM , 1, ISBN:- |
Ahmad Jais Alimin (2020) Systematic Pivoting Of Existing Technological Capabilities In Malaysia To Help Fight Pandemic ? A Brief Note For Future Decision-Making Process, LINKEDIN , 1, ISBN:- |
N. Nordin, A. Sadikin, M. F. M. Ali, A. J. Alimin, S. Mahzan, K. Alias, M. F. M. Batcha, W. S. I. W. Salim, M. K. Abdullah, Z. Noranai, M. A. Razali, A. N. Mohammed, A. Hariri, N. M. Isa, N. F. Nasir, N. Z. Asmuin, B. Manshoor, D. H. Didane, Y. Ramli, S. A. Osman, H. Salleh, A. Sapit, I. Taib, A. F. Idris, H. Zakaria, M. Farid Sies, M. N. A. Mohammad, S. M. Seri (2018) Kertas Kerja Mqa 01 Cadangan Penawaran Program Baharu Sarjana Sains Kejuruteraan Tenaga Lestari (Kerja Kursus), UTHM , -, ISBN:- |
Ahmad Jais Bin Alimin (2009) The Roles Of Exhaust After Treatment Systems In Motor Vehicles In Reducing Air Pollutions, Buletin MEKANIKA (FKMP-UTHM) |
Journal |
Amir Ridhuan, Shahrul Azmir Osman, Mas Fawzi, Ahmad Jais Alimin, Saliza Azlina Osman (2021) A Review Of Comparative Study On The Effect Of Hydroxyl Gas In Internal Combustion Engine (Ice) On Engine Performance And Exhaust Emission, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, AKADEMIA BARU , 9, 1, ISSN:22897879 |
Alimin, A.J., Mahal, S.K., (2020) Experimental Investigation On A Novel Integrated Solar Chimney And Liquid Desiccant System For Simultaneous Power And Fresh Water Generation, INTERNATIONAL ENERGY JOURNAL, ASIAN INSTITUTE OF TECHNOLOGY , 3, 67, ISSN:1513718X |
Zainul Ameerul Ikhsan Zainul Abidin, Mohd Faisal Hushim, Ahmad Jais Alimin, Akmal Nizam Mohhamed, Mohd Azahari Razali, Azwan Sapit, Mzahar Abd Jalal (2019) A Review On Development Of A Lab Scaled Hybrid Vehicle System For Small Gasoline Engine, OP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 1, 012063, ISSN:17578981 |
Ahmad Faiz Ab Rahman, Hazlina Selamat, Ahmad Jais Alimin, Mohd Taufiq Muslim, Muhammad Mazizan Msduki and Nurulaqilla Khamis (2019) Automotive Real-Time Data Acquisition Using Wi-Fi Connected Embedded System, ELEKTRIKA-JOURNAL OF ELECTRICAL ENGINEERING, PENERBIT UTM PRESS , 12, 7, ISSN:01284428 |
ALIMIN, A.J. (2019) Optimized Scheduling For An Air-Conditioning System Based On Indoor Thermal Comfort Using The Multi-Objective Improved Global Particle Swarm Optimization, ENERGY EFFICIENCY, SPRINGER NATURE , 6, 1183, ISSN:1570646X |
Rais Hanizam Madon, Mas Fawzi, Shahrul Azmir Osman, Ahmad Jais Alimin, Mohd Azahari Razali, Muhamad Khairul Ilman Sarwani, Zulhelmy Zinil Abeden (2018) Gas Chromatography Analysis Of A C1-C5 Hydrocarbon Column, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 85, ISSN:2229838X |
Haniff, M.F., Selamat, H., Khamis, N., Alimin, A.J. (2018) Optimized Scheduling Of An Air-Conditioning System Based On Indoor Thermal Comfort Using Multi-Objective Improved Global Particle Swarm Optimization, ENERGY EFFICIENCY, Springer Verlag Netherlands , 9, 1, ISSN:15706478 |
A J Alimin, Y KuangHe, A Sapit and H Selamat (2017) A Study On A Swirl Type Multi-Hole Fuel Injector For A Pfi System To Improve Air-Fuel Mixture Formation, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP , 10, 1, ISSN:1757899X |
Sabah K. Mahal, Ahmad J. Alimin (2017) Advancement In The Technology Of Solar Powered Liquid Desiccant Systems For Fresh Water Production From Atmospheric Humidity, INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING (IREME), Praise Worthy Prize , 3, 191, ISSN:25325655 |
Mohd Shahrul Nizam A Halim, Hazlina Selamat, Ahmad Jais Alimin, Mohd Taufiq Muslim (2017) Development Of An Experimental Test Bench For An Electronically Control Fuel Injection System, ELEKTRIKA, UTM , 12, 30, ISSN:01284428 |
Mohd Taufiq Muslim, Hazlina Selamat, Ahmad Jais Alimin, Mohamad Fadzli Haniff (2017) Manifold Absolute Pressure Estimation Using Neural Network With Hybrid Training Algorithm, PLOS ONE, Public Library of Science , 11, 1, ISSN:19326203 |
Sabah K. Mahal, Ahmad J. Alimin (2016) A Review Of The Hybrid Solar Chimney And Water Desalination Systems For Simultaneous Production Of Electricity And Fresh Water, INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING (IREME), PRAISE WORTHY PRIZE , 9, 419, ISSN:19708734 |
Mohd Faisal Hushim, Ahmad Jais Alimin, Mohd Azahari Razali, Akmal Nizam Mohammed, Azwan Sapit, and Julio Cesar Mendez Carvajal (2016) Air Flow Behaviour On Different Intake Manifold Angles For Small 4-Stroke Pfi Retrofit Kit System, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7565, ISSN:18196608 |
Mohd Taufiq Muslim, Hazlina Selamat, Ahmad Jais Alimin, Noorfaizah Mohd Rohi, Mohd Faisal Hushim (2014) A Review On Retrofit Fuel Injection Technology For Small Carburetted Motorcycle Engines Towards Lower Fuel Consumption And Cleaner Exhaust Emission , RENEWABLE AND SUSTAINABLE ENERGY REVIEWS, Elsevier , 7, 279, ISSN:13640321 |
Ahmad Jais Alimin, Muhammad Yusri Ismail, and Shahrul Azmir Osman (2014) Predicting The Performance And Emissions Characteristics Of A Medium Duty Engine Retrofitted With Compressed Natural Gas System Using 1-Dimensional Software, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication , 10, 468, ISSN:16627482 |
Muhammad Yusri Ismail, Ahmad Jais Alimin, Shahrul Azmir Osman (2013) Mono-Gas Fuelled Engine Performance And Emissions Simulation Using Gt-Power, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 12, 125, ISSN:16627482 |
S. A. Osman, A. J. Alimin, V. S. Liong (2013) Optimum Combustion Chamber Geometry For A Compression Ignition Engine Retrofitted To Run Using Compressed Natural Gas (Cng), APPLIED MECHANICS AND MATERIALS, Trans Tech Publication , 4, 552, ISSN:16627482 |
Shahrul Azmir Osman, Ahmad Jais Alimin, Mohd Yusri Ismail, Koh Wern Hui (2013) Performance And Emission Characteristics Of Direct Injection C.I Engine Retrofitted With Mono-Cng System, APPLIED MECHANICS & MATERIALS, Trans Tech Publications , 11, 443, ISSN:16627482 |
Mohd Faisal Hushim, Ahmad Jais Alimin, Hazlina Selamat, and Mohd Taufiq Muslim (2013) Pfi System For Retrofitting Small 4-Stroke Gasoline Engines, INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND DEVELOPMENT, IACSIT Press , 8, 375, ISSN:20100264 |
Amir Khalid, Norrizal Mustaffa, B. Manshoor, Hanis Zakaria, Ahmad Jais Alimin, Mutalib Leman, A. Sadikin (2013) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, APPLIED MECHANICS & MATERIALS, Trans Tech Publications , 12, 161, ISSN:16627482 |
M. Gomaa, A.J. Alimin, K.A. Kamarudin (2011) The Effect Of Egr Rates On Nox And Smoke Emissions Of An Idi Diesel Engine Fuelled With Jatropha Biodiesel Blends, INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENT (IJEE), International Energy & Environment Foundation , 6, 477, ISSN:20762909 |
Media Digital |
A.J.Alimin (2019) Mobility As A Service (Maas), Slideshares , ISBN:- |
A.J.Alimin (2019) Sanggar Kerja Siswazah: Supervisors And Students - Expectations, Slideshares.net , ISBN:- |
A.J.ALIMIN (2018) Fgk Efi With G200 Engine, APT TOUCH SDN BHD , ISBN:- |
A.J.ALIMIN (2018) Honda Wave With Fgk, APT TOUCH SDN BHD , ISBN:- |
A.J.Alimin (2018) Sharing Session On Pitching, Slideshares , ISBN:- |
A.J.ALIMIN (2017) Demak Transtar 150 Running Using Retrofit Efi, APT TOUCH SDN BHD , ISBN:- |
A.J.Alimin (2017) Energy For Transportation, Slideshares , ISBN:- |
A.J.ALIMIN (2017) Fgk Demak Scooter Running Using Fgk Efi, APT TOUCH SDN BHD , ISBN:- |
H. SELAMAT, M.T. MUSLIM, M.M.MSDUKI (2017) Fgk Installation Tutorial Part A, APT TOUCH SDN BHD , ISBN:- |
A.J.Alimin (2017) Fgk Installation Tutorial Part B, APT TOUCH SDN BHD , ISBN:- |
A.J.Alimin (2017) Fgk Installation Tutorial Part C, APT TOUCH SDN BHD , ISBN:- |
A.J.ALIMIN (2017) Fgk Installation Tutorial Part D, APT TOUCH SDN BHD , ISBN:- |
A.J.ALIMIN (2017) Fgk Installation Tutorial Part E, APT TOUCH SDN BHD , ISBN:- |
A.J.Alimin (2017) Sharing Session On Industrial Revolution 4.0 & Smes - Opportunities & Challenges , Slideshares , ISBN:- |
Policy Paper |
Ahmad Jais Bin Alimin (2021) Pelan Tindakan Keusahawanan (Ptk) Institusi Pengajian Tinggi (Ipt) 2021-2025 |
Prosiding / Seminar |
C Y Ang, A J Alimin and S K Mahal (2020) Investigation On The Performance Of A Novel Dehumidifier For A Combined Solar Chimney And Liquid Desiccant Plant, IOP SCIENCE , 1, ISBN:1757899X |
Widayat, H. Satriadi, N. Favian Nafiega, Rheza Dipo, Okvitarini, A. J. Alimin, and Mas Fawzi Mohd Ali (2015) Biodiesel Production From Multi Feedstock As Feed With Direct Ultrasound Assisted, American Institute of Physics , 30020-1 , ISBN:978073541346 |
Khalid, A., Mustaffa, N., Alimin, A.J., Manshoor, B., Basharie, S.M., Sadikin, A. (2014) Performance And Emission Of A Diesel Engine Fuelled With Preheated Palm Oil Biodiesel Under High Load Conditions, Trans Tech Publication , 61, ISBN:978-303785936-0 |
Khalid, A., Mustaffa, N., Manshoor, B., Zakaria, H., Alimin, A.J., Leman, A.M., Sadikin, A. (2014) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, Trans Tech Publication , 161, ISBN:978-303785933-9 |
Shahrin Hisham Amirnordin, Nurudeen Ihsanulhadi, Ahmad Jais Alimin, Amir Khalid (2012) Effects Of Palm Oil Biodiesel Blends On The Emissions Of Oil Burner, FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING, UNIVERSITI TUN HUSSEIN ONN MALAYSIA , 956, ISBN:16609336 |
Ahmad Jais Bin Alimin (2011) Effect Of Intake Manifold Angle Of Port-Fuel Injection Retrofit-Kit To The Performances Of An S.I. Engine, - |
Ahmad Jais Bin Alimin (2011) Influence Of Fuel Injector Position Of Port-Fuel Injection Retrofit-Kit To The Performances Of Small Gasoline Engine, UTM |
Ahmad Jais Bin Alimin (2011) Specific Fuel Consumption Of A Low Capacity Motorcycle When Fitted With A Retrofit Fuel Injection Kit, - |
Ahmad Jais Bin Alimin (2011) Strategic Research Partnership On Automotive Powertrain And Fuels In Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka And Universiti Tun Hussein Onn Malaysia, - |
Ahmad Jais Bin Alimin (2010) An Overview On Durability Study On A Retrofit Fuel Injection Kit During On-Road Testing, UTHM |
Ahmad Jais Bin Alimin (2010) The Influences Of Different Jatropha-Based Biodiesel Blend On The Performance Of A Diesel-Fuelled Engine, UTeM |
Ahmad Jais Bin Alimin (2010) Trade-Off Between Nox, Soot And Egr Rates For An Idi Diesel Engine Fuelled With Jb5, WASET |
Ahmad Jais Bin Alimin (2009) Experimental Investigation To Control Soot Emission For A Ci Engine Fuelled With Blended Crude Jatropha Oil, - |
Ahmad Jais Bin Alimin (2009) Experimental Study On The Application Of Fuel Injection Retrofitment Kit For A Small Gasoline Fuelled Engine, UMT |
Ahmad Jais Bin Alimin (2009) Feasibility Of A Novel Diesel Particulate Filter For Reducing Soot Emission, UMT |
Ahmad Jais Bin Alimin (2009) Optimal Control Of Railway Vehicle System, IEEE-ICIT |
Ahmad Jais Bin Alimin (2009) Performance Of Diesel Engine Using Blended Crude Jatropha Oil, - |
Ahmad Jais Bin Alimin (2009) Reduction Of Soot Emission From Diesel Fuelled Engine Using A Novel After Treatment System, MTUN |
Ahmad Jais Bin Alimin (2009) Reduction Of Soot Emission From Diesel-Fuelled Engine Using A Novel Diesel Particulate Filter (Dpf), UNiMAP |
Ahmad Jais Bin Alimin (2008) Effects Of Porous Ceramic/Zeolite To The Exhaust System Of Gasoline Engine |
Ahmad Jais Bin Alimin (2008) Study On The Properties And Combustion Behaviours Of Jatropha As An Alternative Source For Biodiesel, UNITEN |
Ahmad Jais Bin Alimin (2007) Fuel Penalty From Periodic Rich Combustion Of A Diesel Fuelled Engine During Lean Nox Trap Purging, UNIMAS |
Ahmad Jais Bin Alimin (2007) Periodic Rich Combustion Of A Diesel Fuelled Engine For Nox Emissions Reduction Through Engine Management System, UNiMAP |
Consultancies
Year | Description | Level |
---|---|---|
2017 | Fuel booster performance; SIRIM QAS International Sdn Bhd & MB10 Sdn Bhd, 2017 | Private |
2015 | Speaker on Diesel Fuel Technology (Diesel fuel properties, Emissions control & Clean diesel technology) for PRASARANA, Pulau Pinang, 2-3 September 2015 | Private |
2011 | SIRIM QAS International Sdn Bhd; Fuel efficiency assessment evaluation works on behalf of SIRIM (petrol & diesel fuelled engines) | National |
2011 | SCOMI Rail Bhd; Project: AIR FLOW ANALYSIS FOR AIR- CONDITIONING DUCTING SYSTEM FOR KL MONORAIL, August 2011 (on-going) | Private |
2011 | Evaluation on spark ignition engine operating performance after treatment using Nano Ball, SIRIM QAS International Sdn Bhd & Absolute Effects Sdn Bhd, 2011 | Private |
2011 | Testing the effectiveness of a fuel saver device for spark ignition engine, SIRIM QAS International Sdn Bhd & RMF Marketing Sdn Bhd, 2011 | Private |
2011 | Engine performances of a diesel-fuelled engine cleaned using TEC(A): Part 2, SIRIM QAS International Sdn Bhd & Clean Blades Sdn Bhd, 2011 | Private |
2011 | Engine performances of a diesel fuelled engine treated using 1Solution 3 in 1 Engine Detox, SIRIM QAS International Sdn Bhd & Chem Tune (Asia) Sdn Bhd, 2011 | Private |
2010 | TPM Engineering Sdn Bhd-Engineering and powertrain technical advisor for the project: Merancang, Mereka, Membina, Menguji dan Mentauliah Jentera Pembajak Lima (5) Fungsi yang mampu membajak, menekan rumput, menyisir, merata tanah, membaja dan menyembur racun | National |
2010 | SIRIM QAS International Sdn Bhd; Fuel efficiency assessment evaluation works on behalf of SIRIM (petrol & diesel fuelled engines) | National |
2010 | Engine performances of a diesel-fuelled engine cleaned using TEC(A): Part 1, SIRIM QAS International Sdn Bhd & Clean Blades (M) Sdn Bhd, 2010 | Private |
2010 | Experimental analysis on palm methyl ester fuel (MB) as alternative fuel for compression ignition engine, SIRIM QAS International Sdn Bhd & Mission Biotechnologies Sdn Bhd, 2010 | Private |
2010 | Experimental investigation on Amalina Biofuel as replacement fuel for compression ignition based vehicles, SIRIM QAS International Sdn Bhd & IP Synthesis Sdn Bhd, 8/2010 | Private |
2010 | Engine performance testing on biofuel (coconut methyl ester and palm oil based) as alternative fuel for compression ignition engine, Department of Physics, Universiti Putra Malaysia, Serdang, Selangor, 2010 | University |
2010 | Performance analysis on spark and compression ignition engines operating using fuels blended with additives, SIRIM QAS International Sdn Bhd & Iter Services Sdn Bhd, 2010 | Private |
Supervision
Year | Description | Role |
---|---|---|
2021 | Siti Hajar Mohd Kamari, Bachelor Degree Project: Investigation on performance of motorcycle engine using ethanol-butanol-gasoline blend fuel, UTHM, 2021 | Supervisor |
2021 | Norliza Junaidi, Bachelor Degree Project: Analysis on Rattan as the alternative material for exoskeleton structure, UTHM, 2021 | Supervisor |
2021 | Nuridah binti Mansor, Bachelor Degree Project: Economic Analysis from Well to Wheels - Malaysia Scenario, UTHM, 2021 | Supervisor |
2021 | Muhammad Norhakim bin Shukor, Bachelor Degree Project: Design and fabrication of Exhaust Flow Meter (EFM) for on-road testing of a medium duty C.I. engine, UTHM, 2021 | Supervisor |
2020 | Sabah Kadhim Mahal, PhD Thesis: A Novel Integrated Solar Chimney and Liquid Desiccant System for Simultaneous Production of Power and Fresh Water, PhD, UTHM, 2020 | Supervisor |
2020 | Nur Athirah binti Ahmad, Bachelor Degree Project: Water quality and energy analysis for hybrid solar chimney and freshwater generator, UTHM, 2020 | Supervisor |
2020 | External Examiner for Mahadhir bin Mohammad, Masters, Universiti Teknologi Malaysia, September 2020 | External Examiner |
2020 | Chew Boon How, Bachelor Degree Project: Investigation on the Water Quality and the Dehumidifier Performance for a Combined Solar Chimney and Liquid Desiccant Plant using Different Desiccant Concentration, UTHM, 2020 | Supervisor |
2020 | Tan Cheng Yong, Bachelor Degree Project: Design and analysis of an engine-generator assembly for C-Drone system, UTHM, 2020 | Supervisor |
2020 | Kevin Kee Chie Huong, Bachelor Degree Project: The influence of in-pipe heater in treating the emissions from 1.3 litre S.I. engine, UTHM, 2020 | Supervisor |
2020 | External Examiner for Abdurrahman bin Noor Iskandar, Masters, Universiti Putra Malaysia, June 2020 | External Examiner |
2019 | Muhammad Hakim bin Roslan, Bachelor Degree Project: Experimental work on the Power Regenerative Turbine for Renewable Energy Source on Solar Chimney Power Plant, UTHM, 2019 | Supervisor |
2019 | Mohamad Lukman Hakim bin Mohd Yusoff, Bachelor Degree Project: Analysis on the Thermal Distribution and Air Flow inside a Solar Chimney Plant, UTHM, 2019 | Supervisor |
2019 | Ang Chuen Yuen, Bachelor Degree Project: Investigation on the performance of a novel dehumidifier for a combined solar chimney and liquid desiccant plant, UTHM, 2019 | Supervisor |
2019 | Ang Chuen Yuen, Masters of Mechanical Engineering (Research): An assessment on the real driving emissions test for a EURO-2 Compliant heavy duty CI engine towards enforcement of stricter emissilons regulations, UTHM, 2019 - on going | Supervisor |
2019 | Penilai, Peringkat Universiti, Permohonan Geran Penyelidikan Fundamental (FRGS) KPM, 2019 | Assessor |
2019 | Examiner for PhD Thesis: Norrizal bin Mustaffa (2019): Characterisation and evaluation of a Spark Ignition Engine installed with Liquid LPG Injection System | Examiner |
2019 | Reviewer/Referee, CFDRI2019, Universiti Tun Hussein Onn Malaysia, Universiti Brunei Darussalam & Prince of Songkla University, 3-4 August 2019 | Referee |
2019 | External Examiner for Nurfarahin binti Burhanuddin, Masters, Universiti Teknologi Malaysia, April 2019 | External Examiner |
2019 | External Examiner for M.S. Murshitha Shajahan, PhD, B.S. Abdur Rahman Crescent Institute of Science & Technology, India, 2019 | External Examiner |
2018 | Asyraf Muhaimin bin Ashaari, Bachelor Degree Project: The influence of secondary air supply system to the emission characteristics of 110cc S.I. engine operating using retrofit EFI system, UTHM, 2018 | Supervisor |
2018 | External Assessor - Penilaian Kendiri Program Teknologi Automotif, Kolej Vokasional Sepang, Selangor, 29th August 2018 | External Assessor |
2018 | Ayu Pratiwi, Masters of Mechanical Engineering (Research): Emissions control technology for SI engines, UTHM, 2018 - on going | Supervisor |
2018 | Adli Amir bin Mohd Nordin, Bachelor Degree Project: Study on the operating characteristics and fuel economy of a 150cc single cylinder engine running using retrofit electronic fuel injection (EFI) system, UTHM, 2018 | Supervisor |
2018 | Welfred Unjal Anak Kuan, Bachelor Degree Project: Performance of a dedicated exhaust after treatment (EAT) system for a 110cc S.I. engine operating using an EFI system, UTHM, 2018 | Supervisor |
2017 | Nuraini binti Alias, Bachelor Degree Project: GT-Suite Simulation of a 110cc petrol-fuelled engine running using retrofit fuel injection system, UTHM, 2017 | Supervisor |
2017 | Yiew Kuanghe, Bachelor Degree Project: The new configuration of nozzle head of port fuel injector to improve air-fuel mixture formation, UTHM, 2017 | Supervisor |
2016 | External Examiner for Mohd Zaini bin Jamaludin, Sarjana Sains, Universiti Teknikal Melaka (UTeM), 7 January 2016 | External Examiner |
2016 | External Examiner for Mohammad Nazry bin Rosley, Sarjana Sains, Universiti Teknikal Melaka (UTeM), 5 Disember 2016 | External Examiner |
2016 | Mohd Taufiq Muslim, PhD, ECU Development and Control for Small Gasoline Engines, UTM, Penyelia Bersama, (2014-2016) | Supervisor |
2016 | Supervisor for Sabah K. Mahal, PhD (A Novel Integrated Solar Chimney & Liquid Desiccant System for Simultaneous Production of Power and fresh water), UTHM, (2016-on going) | Supervisor |
2015 | Abdul Karim bin Abdul Rashid, Bachelor Degree Project: Pengaruh Mangkin Natrium Hidroksida (NaOH) dan Nisbah Campuran Bahan Mentah kepada Kualiti Penghasilan Biodiesel, UTHM, 2015 | Supervisor |
2015 | Muhammad Badruddin bin Yusof, Bachelor Degree Project: Tekanan Pembakaran Silinder Enjin Sederhana Beroperasi Menggunakan Sistem Bahan Api Gas Tunggal (MONOGAS), UTHM, 2015 | Supervisor |
2015 | Thawisap a/l Deang, Bachelor Degree Project: Feasibility Study of Refuse Derived Fuel (RDF) as Replacement for Conventional Solid Fuel, UTHM, 2015 | Supervisor |
2015 | Mohd Faizal bin Taha, Bachelor Degree Project: Prestasi Penyuntikan Bahan Api Untuk Kegunaan Sistem Suntikan Semburan Liang Pernafasan, UTHM, 2015 | Supervisor |
2015 | Muhammad Faizal bin Abdul Aziz, Bachelor Degree Project: Ciri-ciri biodiesel yang dihasilkan daripada pelbagai bahan mentah menggunakan sodium hidroksida (NaOH), UTHM, 2015 | Supervisor |
2015 | Muhammad Hilmi bin Amir, Bachelor Degree Project: Simulasi GT-Suite Enjin Saiz Sederhana pada Pelbagai Parameter Operasi, UTHM, 2015 | Supervisor |
2014 | Shahrul Azmir Osman, PhD, Combustion Characteristics of a Retrofit Direct Injection Mono-gas Engine under Different Injection Timing and Pressure Delivery, UTHM, 2012-2014 | Supervisor |
2014 | Mohd Syafiq bin Maulud, Bachelor Degree Project: Simulation on Air and Fuel Flow Behaviour of a Retrofit Port Fuel Injection System of Different Intake Manifold and Injector Angles, UTHM, 2014 | Supervisor |
2014 | Mohd Izzuddin bin Hashim, Bachelor Degree Project: Penghasilan Biodiesel dari Minyak Sayur (VCO) dengan Mangkin Natrium Hidroksida (NaOH), UTHM, 2014 | Supervisor |
2014 | Luqman bin Mohd Zahir, Bachelor Degree Project: Kajian Potensi Sumber Tenaga boleh diperbaharui bagi Keperluan Daerah Batu Pahat, Johor, UTHM, 2014 | Supervisor |
2014 | Nur Liyana binti Shafii, Bachelor Degree Project: Penghasilan Biodiesel dari Minyak Masak Terpakai menggunakan Mangkin Natrium Hidroksida (NaOH) pada Nisbah Berbeza, UTHM, 2014 | Supervisor |
2014 | Wan Khalid AlWalid bin Wan Mamat, Bachelor Degree Project: Heat Release Rate Analysis for a Retrofitted Mono Gas S.I. Engine at Different Engine Parameter, UTHM, 2014 | Supervisor |
2014 | Amerul Mustaqim bin Muhammad @ Mamat, Bachelor Degree Project: Rekabentuk Pancarongga Masukan Kit Suntikan Bahanapi Retrofit bagi Enjin Petrol Berkapasiti Kecil, UTHM, 2014 | Supervisor |
2014 | Muhamad Fazli bin Makhtar, Bachelor Degree Project: Design of Throttle Body for a Retrofit Fuel Injection System for a Small Gasoline Engine, UTHM, 2014 | Supervisor |
2014 | Muhammad Yusri bin Ismail, Masters of Mechanical Engineering (Research): One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas, UTHM, 2014 | Supervisor |
2014 | Anisah binti Othman, Bachelor Degree Project: Esterification and Transesterification of CPO using Natrium Hydroxide (NaOH) at Different Ratios, UTHM, 2014 | Supervisor |
2014 | Ahmad Faez bin Ariffin, Bachelor Degree Project: Properties of Multiple Feedstocks Biodiesel Blends Produce using Potassium Hydroxide (KOH), UTHM, 2014 | Supervisor |
2014 | Siti Sarah binti Awang, Bachelor Degree Project: Kesan Pemangkin Natrium Hidroksida (NaOH) dalam Penghasilan Biodiesel menggunakan pelbagai Bahan Mentah, UTHM, 2014 | Supervisor |
2014 | Syarifah Nursyafiqah binti Syed Mohamed Kher, Bachelor Degree Project: Pencirian Kandungan Asap Masakan di dalam Dapur Hotel, UTHM, 2014 | Supervisor |
2014 | Ting Kee Ghin, Bachelor Degree Project: Conversion of Solid Waste from Household Waste into Solid Refuse Derived Fuel (RDF), UTHM, 2014 | Supervisor |
2014 | Ling Jai Zing, Bachelor Degree Project: Mixture Formation and Flame Kernel Propagation during Ignition Process of Retrofitted CNG Engine, UTHM, 2014 | Supervisor |
2014 | Shah Jahan binti Mohamad Mokhtar, Bachelor Degree Project: Simulation of Solid Fuel Combustion in the Cyclone Combustion Chamber using Fluent-14.0, UTHM, 2014 | Supervisor |
2014 | Mohd Faisal Hushim, PhD, Analysis of Air Fuel Mixture Behaviour for Port Fuel Injection Retrofit Kit Small Gasoline Engine, UTHM, 2012-2014 | Supervisor |
2014 | Muhammad Nasrul bin Izha, Bachelor Degree Project: Penghasilan Biodiesel menggunakan Tiga Jenis Bahan Mangkin dengan menggunakan Pemangkin Natrium Metoksida (NaOCH3), UTHM, 2014 | Supervisor |
2014 | Ahmad Fariqin bin Abd Malek, Bachelor Degree Project: Simulasi suntikan bahan api enjin petrol 125cc menggunakan pancarongga masukan pada pelbagai diameter tekak, UTHM, 2014 | Supervisor |
2014 | Ghafarrullah bin Mohd Nor, Bachelor Degree Project: Greenhouse Gas (GHG) Mitigation of a Retrofitted Compression Ignition Fuelled with Compressed Natural Gas (CNG), UTHM, 2014 | Supervisor |
2013 | Panel Penilai Luar Bengkel Penilaian dan Pemurnian Item Peperiksaan Akhir Politeknik KPT bagi Program Diploma Lanjutan Kejuruteraan Rekabentuk & Pembuatan Automotif (AAD), Kuala Lumpur, 20-22 Mac 2013 | External Assessor |
2013 | Examiner for PhD in Mechanical Engineering Thesis: Abdlmanam S.E. Almaryami (2013) - 1-Dimensional Transient Heat Transfer Axi-Symmetric Mathematical Modelling to Determine Lowest Point Industrial Quenched Steel Bar, 28 October 2013 | Examiner |
2013 | External Examiner for Iskandar bin Meran, Sarjana Sains, Universiti Teknikal Melaka (UTeM), 2 April 2013 | External Examiner |
2013 | Reviewer/Referee, National Conference on Engineering Technology 2013 (NCET2013), Jabatan Tenaga Manusia, Kementerian Sumber Manusia Malaysia, 1-2 Julai 2013 | Referee |
2013 | Referee, Pameran Inovasi Produk ke-5 (INNOVATORSX5), Universiti Tun Hussein Onn Malaysia, 16 December 2013 | Referee |
2013 | Referee, NATIONAL FORUM AND EXHIBITION ON ENGINEERING DESIGN 2013 (NFEED2013), Universiti Tun Hussein Onn Malaysia, 21-22 October 2013 | Referee |
2012 | Mohd Izuan bin Ibrahim, Bachelor Degree Project, Gas Injection Quality of a Monogas Fuelling System, UTHM, 2012 | Supervisor |
2012 | Khairil Abadi bin Ahmad Jemadi, Bachelor Degree Project, Development of Dedicated Engine Management System for a Retrofit Fuel Injection Kit based on Throttle and Load Demands, UTHM, 2012 | Supervisor |
2012 | Abdul Mu'iz bin Mohamad Koldaie, Bachelor Degree Project, Fuel Economy Characteristic of a Single Cylinder Spark Ignition Engine equipped with a Retrofit Fuelling Kit, UTHM, 2012 | Supervisor |
2012 | Yeoh Yeong Kai, Bachelor Degree Project, GT-Suite Modeling of an Internal Combustion Single Cylinder Gasoline fuelled Engine using a Retrofit Fuel Injection Kit, UTHM, 2012 | Supervisor |
2012 | Mohd Hisyammudin bin Sa'aid, Bachelor Degree Project, Performance Characteristics of a Novel Monogas Unit Fuelling a Compression Ignition Engine, UTHM, 2012 | Supervisor |
2012 | Fahmi Othman, Bachelor Degree Project, Comparative Study between Port Fuel Injection and Gasoline Direct Injection to be Retrofitted on 4-stroke Engines, UTHM, 2012 | Supervisor |
2012 | Mohd Firdaus bin Othman, Bachelor Degree Project, Power and Torque Stability of Small Gasoline Engine Operating using a Retrofit Fuel Injection Kit, UTHM, 2012 | Supervisor |
2012 | Mohd Muhsein bin Taib, M.Eng., Experimental investigation on the feasibility and durability of a novel diesel particulate filter | Supervisor |
2012 | Voon See Liong, Bachelor Degree Project, Physical Geometries of a Compression Ignition Unit running using Retrofit Monogas Unit, UTHM, 2012 | Supervisor |
2012 | Zul Hairi bin Samsudin, Bachelor Degree Project, Suitability of 4 Cylinder Direct Injection Diesel Engine for Conversion into Monogas System, UTHM, 2012 | Supervisor |
2011 | Mohd Farris bin Mansor, Bachelor Degree Project: Development of an intake manifold for small 4-stroke gasoline engine, UTHM, 2011 | Supervisor |
2011 | Muhammad Firdaus bin Chamari, Bachelor Degree Project: Pengaruh sudut penyuntik bahan api sistem suntikan bahan api retrofit kit pada sebuah enjin gasolin, UTHM, 2011 | Supervisor |
2011 | Mohd Taufik bin Ngatman, Bachelor Degree Project: Performances comparison of small gasoline engine running using carburettor and retrofit fuel injection kit, UTHM, 2011 | Supervisor |
2011 | Mohd Khairul Zaimy bin Ab Ghani, Bachelor Degree Project: Kajian simulasi dan pengesahsahihan penggunaan sistem penyuntik bahan api enjin gasolin 125cc menggunakan perisian GT-Suite, UTHM, 2011 | Supervisor |
2011 | Mohamad Suhaizamri bin Mohd Tayid, Bachelor Degree Project: Konfigurasi pemetaan unit kawalan elektronik, ECU (Electronic Control Unit) pada motorsikal 4-lejang yang dilengkapi dengan sistem pancitan bahan api elektronik EFI (Electronic Fuel Injection), UTHM, 2011 | Supervisor |
2011 | Mohd Fakhri Murshidi bin Mohamad, Bachelor Degree Project: Experimental study using chassis dynamometer on a motorcycle equipped with a retrofit fuel injection kit, UTHM, 2011 | Supervisor |
2011 | Examiner for M.Eng. in Mechanical Engineering Thesis: Achmad Praptijanto (2011) - Sonochemistry approach for a new process biodiesel production from Jatropha Curcas oil, 12 Oktober 2011 | Examiner |
2011 | Ahmad Sufi bin Shaiful Bahri, Bachelor Degree Project: On road durability study of a 4-stroke motorcycle equipped with retrofit fuel injection kit, UTHM, 2011 | Supervisor |
2010 | Adzmawi bin Hj Ahmad Derniyan, Bachelor Degree Project: Kesan perubahan sudut injap pemasaan masukan terhadap prestasi enjin, UTHM, 2010 | Supervisor |
2010 | Nor Hazrin bin Abu Hasan, Bachelor Degree Project: The influence of intake air temperature variations on engine performance, UTHM, 2010 | Supervisor |
2010 | Zuhariman bin Yaacob, Bachelor Degree Project: Kajian terhadap parameter-parameter operasi enjin yang mempengaruhi prestasi enjin yang diubahsuai, UTHM, 2010 | Supervisor |
2010 | Mohd Azrul bin Mohd Ridzuan, Bachelor Degree Project: Performance simulation of a new fuel injector for small gasoline engines, UTHM, 2010 | Supervisor |
2010 | Melvin Aedy Anak Anyoi, Bachelor Degree Project: Prestasi kenderaan berkuasa diesel yang menggunakan pelbagai campuran bahan api biodiesel, UTHM, 2010 | Supervisor |
2010 | Mohd Rizan bin Abdul, Bachelor Degree Project: Kapasiti penapisan bagi sistem penapis partikel diesel baru, UTHM, 2010 | Supervisor |
2010 | Alexzender Dusin, Bachelor Degree Project: Development of fuel supply system for a new fuel injector for small engine, UTHM 2010 | Supervisor |
2010 | Mohamed Gomaa Gouda Gad, M.Eng, Trade-off between NOX and smoke emissions using EGR for a C.I. engine fuelled with Jatropha biodiesel blends | Supervisor |
2010 | Maizatul Hafizah binti Abdul Hamid, Bachelor Degree Project: Kajian simulasi ke atas enjin nyalaan mampatan menggunakan aplikasi GT-Suite, UTHM, 2010 | Supervisor |
2010 | Nurul Syuhada binti Ismail, Bachelor Degree Project: Kajian simulasi ke atas enjin PERODUA Viva dengan menggunakan perisian GT-Suite untuk meningkatkan prestasi penjimatan minyak, UTHM, 2010 | Supervisor |
2009 | Zuhaili bin Daud, Bachelor Degree Project: Experimental Study on a Diesel Particulate Filter for Diesel Engine, UTHM, 2009 | Supervisor |
2009 | Mohd Hafiz Fadhil bin Md Yunos, Bachelor degree project: Kesan penggunaan kebuk campuran di dalam sistem ekzos kereta, UTHM, 2009 | Supervisor |
2009 | Ahmad Afif bin Mohamad Zen, Bachelor Degree Project: Performance comparison between carburettor and fuel injection system, UTHM, 2009 | Supervisor |
2009 | Nur Azlan bin Abdul Kadir, Bachelor Degree Project: Ciri-ciri pengecas turbo yang sesuai bagi enjin Proton Campro, UTHM, 2009 | Supervisor |
2009 | Jeffery Goh Kok Wai, Bachelor Degree Project: External enrichment apparatus for diesel exhaust system equipped with an after treament system, UTHM, 2009 | Supervisor |
2008 | Mohd Afif bin Mohd Aini, Bachelor Degree Project: Back-pressure analysis on inline exhaust system equipped with an after treatment device, UTHM, 2008 | Supervisor |
2008 | Afif Hafiz bin Mohamad & Mohamad Sukri bin Salehudin, Diploma Project: Shock absorber compressor devices (SACD), UTHM, 2008 | Supervisor |
2008 | Mohd Ezuezairi bin Mohd Anuai & Ahmad Rasul bin Ali, Diploma Project, A mixing chamber for an exhaust system, UTHM, 2008 | Supervisor |
2008 | Internal Auditor for University (UTHM) Academic Audit: 1 Jan. 2008 to 31 Dec. 2008 | Assessor |
2008 | Mohd Azmir bin Mohd Shahar, Bachelor Degree Project: The effect of exhaust gas recirculation (EGR) system on vehicle performance, UTHM, 2008 | Supervisor |
2008 | Mohd Effy Saiful bin Zulkefli, Bachelor Degree Project: Emissions reduction through air injection, UTHM, 2008 | Supervisor |
2008 | Wan Mohamad Arif bin Wan Husain & Him Ramsy, Diploma Project: Bekas penapis asap enjin diesel, UTHM, 2008 | Supervisor |
2008 | Sheikh Rajib farouk bin Sheikh Abdul Jalil & Mohamad Fahmi bin Mohamad Raazali, Diploma Project: Serviceable catalytic converter casing, UTHM, 2008 | Supervisor |
2008 | Abdul Azim bin Alias & Naqiuddin bin Che Azin, Diploma Project: Fabrikasi ke atas penjana motor dan penghidup motor sebagai model pengajaran dan pembelajaran, UTHM, 2008 | Supervisor |
2008 | Muhammad Taufik bin Bahran & Muhammad Farid bin Suradi, Diploma Project: Palm oil seed picker 2020 (Mesin kutip sawit 2020-MKS2020), UTHM, 2008 | Supervisor |
Extension & Public Services
Year | Description | Level |
---|---|---|
2020 | Speaker/Facilitator on "Best Practices in Writing Technical Proposals", Bengkel Penulisan Proposal Fakulti Teknologi Kejuruteraan (FTK), UTHM, 28 Januari 2020 | University |
2020 | Ahli Jawatankuasa Strategi 3, Pelan Tindakan Keusahawanan Institut Pengajian Tinggi 2021-2025 (PTKIPT 2021-2025), Ministry of Higher Education Malaysia | National |
2020 | Participant, Workshop 1 - New Industrial Masterplan (NIMP) 2019 - 2030 - Technology Cluster, organised by Malaysia Automotive, Robotics & IoT Institute (MARii), 4th February 2020 | National |
2020 | Fellow, Royal Academy of Engineering United Kingdom - Leaders in Innovation Fellowships (LIF), 2020 | International |
2019 | Fasilitator, Sesi Perkongsian Pengalaman Penyediaan Geran Malaysia Laboratories for Academia-Business Collaboration (MyLAB), Universiti Tun Hussein Onn Malaysia, 29th July 2019 | University |
2019 | Speaker, Half-Day Talk: "Hybrid Liquid Desiccant System and Chimney Micro-plant for Simultaneous Production of Fresh Water and Electricity", Institute of Engineers Malaysia (IEM) Southern Branch, 16th November 2019, Johor Bahru, Johor | National |
2019 | Speaker: "Supervisor & Students: Expectations", Program Kursus Sanggar Kerja 2019, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2019 | University |
2018 | Advisor, Team PROTON Envysage UTHM, for PROTON-DRB HICOM U Creative Car Challenge (PD3C2018), August - December 2018; 4th place | National |
2018 | Invited Speaker for 9th International Conference on Mechanical & Manufacturing Engineering (ICME) 2018, Johor Bahru, Johor, 16-17 July 2018 | International |
2018 | Speaker, Sharing session on 'Pitching', UTHM, 12th August 2018 | University |
2017 | Speaker, Sharing Session on 'Industrial 4.0: Challenges & Opportunities', UTHM, 6th November 2017 | University |
2017 | PECIPTA2017, Silver Medal: Retrofit EFI with intelligent monitoring | International |
2017 | Head Judge, for the presentations at SAVE RIDER SYMPOSIUM, 19th September 2017, organised by Malaysia Institute of Road Safety Research (MIROS) | National |
2017 | Speaker for Short Course on 'Towards Zero Emissions Transports', 16-23rd August 2017, Veltech Dr. RR & Dr. SR University, Chennai, India | International |
2013 | Ahli Jawatankuasa MechClub, Fakulti Kejuruteraan Mekanikal & Pembuatan, UTHM, bermula September 2013 | University |
2013 | Co-founded APT TOUCH SDN BHD (www.apttouch.com), a spin-off company focusing on technologies for mobile transportation | Private |
2013 | Keynote Speaker, SEMINAR NASIONAL REKAYASA KIMIA DAN PROSES 2013, UNIVERSITI DIPONEGORO (UNDIP), Semarang, Indonesia, 28 August 2013 | International |
2013 | Pengerusi, Program Santai Sehari di Rumah Anak Yatim Mersing, bersama MechClub Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, 29 Jun 2013 | University |
2013 | Speaker & Fascilitator, SEMINAR ASAS PERUNDINGAN, Fakulti Kejuruteraan Mekanikal dan Pembuatan, Universiti Tun Hussein Onn Malaysia, 7 November 2013 | University |
2013 | Pengarah, Program Promosi dengan Motorsikal Berkuasa Tinggi ke Politeknik Muadzam Shah, Pahang dan Politeknik Dungun, Trengganu, 4-6 Februari 2013 | University |
2012 | Judge, JOHOR 2012 Invention, Innovation & Design Competition, 13 September 2012 | National |
2012 | Fasilitator, Kumpulan Inovatif dan Kreatif (KIK): Mekanikal, FKMP, UTHM, 2012 | University |
2012 | Chairman, Executive Committee for 1st National Technological Exposition on Rural Innovation (TechRural2012) | University |
2012 | Chairman, Executive Committee for International Conference on Mechanical and Manufacturing Engineering 2012 (ICME2012) | University |
2012 | Penilai, Permohonan Geran Penyelidikan MTUN CoE, 29 Mac 2012 | University |
2012 | Panel Penilai, Kertas Persidangan Malaysian Technical Universities International Conference on Engineering and Technology 2011 (MUiCET2011) | University |
2012 | Ahli, Kumpulan CAPs MyBrain15 IPMO bagi tahun 2012-2013, UTHM | University |
2012 | Judge, 5th International Conference on Postgraduate Education (ICPE5), Johor Bahru, Johor | International |
2012 | Evaluator, Program Khas JPA 2012 - Kejuruteraan Jepun, Korea, Jerman dan Perancis: 8-9 May 2012 | National |
2012 | Pengerusi, Mesyuarat Panel Readers Naskhah Sedia Kamera bagi Mata Pelajaran Aliran Teknikal Tingkatan 5: Pengajian Kejuruteraan Mekanikal, anjuran Bahagian Buku Teks, Kementerian Pelajaran Malaysia, Port Dickson, Negeri Sembilan, 9-13 Julai 2012 | National |
2012 | Member, Malaysia Automotive Technology Roadmap (MATR) 2025 Roundtable Discussion, 9th July 2012, organised by Malaysia Automotive Institute (MAI) | National |
2011 | Member, National Biodiesel Framework | National |
2011 | Referee/Reviewer, IMechE Journal of Automobile Engineering: Part D, since August 2011 | International |
2011 | Graduate Member, Institute of Engineers Malaysia (since 2011): IEM 48491 | National |
2011 | Deputy Chairman, Executive Committee for International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011): 01/01/2011-31/12/2011 | University |
2010 | Speaker, "POINTER MANAGEMENT", for LESTARI CEMERLANG program, Faculty of Mechanical and Manufacturing Engineering, UTHM, 5-7 Februari 2010 | University |
2010 | Ahli, Jawatankuasa Penyiasat Kehilangan Aset Alih Universiti bagi Kes-kes Kehilangan/Kerosakan/Pemantauan Aset Universiti, UTHM, 01/01/2010 - 31/12/2011 | University |
2010 | Ahli Jawatankuasa, BADAN KEBAJIKAN ISLAM PERDANA TERRACES (BAKIS), Taman Sri Pulai Perdana, Johor Bahru, Johor, 01/08/2010 - 01/08/2012 | District |
2010 | Member, Society of Automotive Engineers (since 2010): SAE 6114916880 | International |
2010 | Advisor, Team EX5 UTHM, for PERODUA Viva Eco-Challenge, June 2010: 4th place, Manual Category | National |
2009 | AJK dan Penceramah, Program GEARING FOR SUCCESS bagi para pelajar FKMP, UTHM, 2-4 Oktober 2009 | University |
2009 | Advisor, Team AutoDev UTHM, for IEMA Race 2009, 24-25 July 2009: 4th place overall | National |
2009 | Coordinator, Team MyCitrus UTHM, for PERODUA MyVi Eco-Challenge, 17-19 June 2009: 4th place, Manual Category | National |
2008 | Panel Penilai Prosiding bagi International Conference on Mechanical and Manufacturing Engineering (ICME), 2008 | University |
2008 | Co-ordinator, Faculty Committee on Academic Quality Assurance: 14 Feb 2008 to 13 Feb 2010 | University |
2008 | Secretary, Executive Committee for International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008): 1 Mar. 2007 to June 2008 | University |
2008 | Graduate Member, Board of Engineers Malaysia (since 2008): BEM 56863A | National |
2007 | Assistant Co-ordinator, Faculty Committee on Bachelor Degree Project: 1 June 2007 to 31 Oct. 2008 | University |
Courses & Training
Year | Description Organiser / Venue | Date |
---|---|---|
2022 | KULIAH PERDANA - RAMADHAN KEMBALI BERSEMI FKMP,UTHM / ZOOM WEBINAR | 07/04/2022 |
2022 | PROGRAM BUAL BICARA STAF FKMP BERSAMA DATO' SRI IBRAHIM B.AHMAD- LEMBAGA PENGARAH UTHM SECARA HIBRID FKMP,UTHM / YOUTUBE (HIBRID) | 26/01/2022 |
2022 | BUAL BICARA PNC PERANCANGAN STRATEGIK DAN KUALITI : HALA TUJU FKMP 2022 DARIPADA PERSPEKTIF UTHM GTU2030 FKMP,UTHM / ATAS TALIAN | 12/01/2022 |
2021 | INTELLECTUAL PROPERTY (IP) VALUATION FOR AI AND TECH INNOVATION LUAR NEGARA / ONLINE | 23/11/2021 - 24/11/2021 |
2021 | BENGKEL IDEATION AND BUSINESS MODEL CANVAS SIRI 2 TAHUN 2021 UTHM / MICROSOFT TEAMS MEETING HTTPS://BIT.LY/BMCSERIES2 | 21/10/2021 |
2021 | LATIHAN ASAS PENGENDALIAN BAHAN KIMIA FKMP,UTHM / ZOOM WEBINAR | 06/10/2021 |
2021 | SIRI 1 DAN 2 JERAYAWARA PELAN STRATEGIK 2021-2025 UTHM / ZOOM | 07/09/2021 |
2021 | BENGKEL IDEATION AND BUSINESS MODEL CANVAS SIRI 2 TAHUN 2021 UTHM / Microsoft Teams meeting https://bit.ly/BMCSERIES2 | 02/09/2021 |
2021 | 11TH INTERNATIONAL CONFERENCE IN MECHANICAL AND MANUFACTURING ENGINEERING 2021 (ICME '21) UTHM / Secara atas talian | 25/08/2021 - 26/08/2021 |
2021 | FORUM MIROS: PENUNGGANG MOTOSIKAL MAUT LAGI. APA NAK BUAT NI? LAIN-LAIN / MIROS | 21/05/2021 |
2021 | BENGKEL SIRI 1 : TECHNOPRENEUR@UTHM UTHM / BILIK BANKUET, DEWAN SULTAN IBRAHIM (DSI), UTHM | 27/03/2021 |
2020 | TIPS DAN APLIKASI DAN PEMBANGUNAN SOALAN BERARAS TINGGI (OPEN-ENDED QUESTION) UTHM / - | 15/11/2020 |
2020 | WEBINAR NATIONAL TECHNOLOGY & INNOVATION SANDBOX-NTIS UTHM / GOOGLE MEET | 03/11/2020 |
2020 | KURSUS PEMILIKAN SYARIKAT BAGI PEJAWAT AWAM PEJABAT PENDAFTAR,UTHM / BILIK LATIHAN SERI TERATAI, PEJABAT PENDAFTAR | 30/09/2020 |
2020 | Kursus Pengurusan Risiko dalam ISO 9001 Siri 1 PEJABAT PENDAFTAR,UTHM / BILIK LESTARI 2, PTTA | 27/09/2020 |
2020 | BENGKEL SEMAKAN AKHIR DOKUMEN MQA02 MDL FKMP FKMP,UTHM / BILIK MESYUARAT BLOK G2 KOMPLEKS TEKNOLOGI FKMP | 07/09/2020 - 08/09/2020 |
2020 | NDA SIGNING CEREMONY DAN TAKLIMAT BERSAMA SYARIKAT NIHON SDN. BHD UTHM / BILIK LESTARI 1, PTTA | 26/08/2020 |
2020 | 1ST INTERNATIONAL WEBINAR "PERANAN INSTITUSI DALAM MEMPERKASA AKIDAH AHLI SUNNAH WALJAMAAH UTHM / - | 13/08/2020 |
2020 | COVID19 - CRISIS MANAGEMENT ISSUES AND SOCIO-ECONOMIC IMPACT LESSON LEARNED FORM INDUSTRY PERSPECTIVE FKMP,UTHM / GOOGLE MEET | 19/05/2020 |
2020 | THE LEADERS IN INNOVATION FELLOWSHIPS PROGRAMME UTHM / - | 16/02/2020 - 28/02/2020 |
2020 | BENGKEL PEMURNIAAN SOP BAHAGIAN PERKHIDMATAN PELANGGAN 2020 UTHM / UTHM | 10/02/2020 |
2020 | BENGKEL PENYEDIAAN DOKUMEN MQA02 SARJANA SAINS KEJURUTERAAN TENAGA LESTARI (MDL) FKMP UTHM / BILIK MESYUARAT BLOK G2, KOMPLEKS TEKNOLOGI FKMP | 10/02/2020 - 11/02/2020 |
2020 | TAKLIMAT DAN BENGKEL PENULISAN PROPOSAL FRGS UTHM / UTHM PAGOH | 28/01/2020 |