PROF. Dr. MOHD AMRI BIN LAJIS
VK7 PROFESOR
Jabatan Teknologi Kejuruteraan Mekanikal
Fakulti Teknologi Kejuruteraan
PROF. Dr. MOHD AMRI BIN LAJIS

DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL , UNIVERSITI ISLAM ANTARABANGSA (2010)
SARJANA KEJURUTERAAN MEKANIKAL , UNIVERSITI TEKNOLOGI MALAYSIA (2002)
SARJANA MUDA KEJURUTERAAN MEKANIKAL , INSTITUT TEKNOLOGI TUN HUSSEIN ONN (1998)
DIPLOMA KEJURUTERAAN MEKANIKAL , INSTITUT TEKNOLOGI MARA (1995)
CERTIFICATE/SIJIL KEJURUTERAAN JENTERA , POLITEKNIK KUCHING SARAWAK (1991)

CategoryExpertise
Field Category (KPT) : ENGINEERING AND TECHNOLOGY
Field (KPT) : Industrial and Manufacturing Engineering
Field of Specialization (KPT) : Design for Manufacturing and Assembly

Sustainable manufacturing with specifically on waste management and recyling
Recyling of waste aluminium or other metals to be used as a secondary resources
Improvement of the manufacturing process (EDM) particularly on productivity and precision aspects
Development of a new technique for metals recyling (i.e. Hot Extrusion, Hot Forging and Powder Metallurgy)
Modelling and Optimization using Response Surface Methodology (RSM) or Taguchi Method Robust Design

Generating an alternative or secondary materials through recyling of waste products (i.e. Aluminium)
Producing a new accessories or attachment of EDM technology for improvement of productivity in mould and die fabrication
Development of new system or program for optimization of manufacturing process
Generating a secondary resources through recyling of waste products to overcome the shortage of primary materials
Innovating a new cutting tools for mould and die fabrication (i.e. elctrrode for EDM, inserts for milling)

DateDescription
01/01/2018 - 31/12/2022 Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/07/2019 - 30/06/2021 Pengarah
Pusat Pengurusan Penyelidikan
30/01/2020 - 10/02/2020 Menjalankan Tugas Timbalan Naib Canselor (Penyelidikan dan Inovasi)
Pejabat Canselori, Pejabat TNC (Penyelidikan Dan Inovasi)
01/12/2019 - 14/01/2020 Menjalankan Tugas Timbalan Naib Canselor (Penyelidikan dan Inovasi)
Pejabat Canselori, Pejabat TNC (Penyelidikan Dan Inovasi)
01/07/2017 - 30/06/2019 Pengarah
Pusat Pengurusan Penyelidikan
01/05/2017 - 30/04/2019 Timbalan Dekan (Penyelidikan & Pembangunan)
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Penyelidikan Dan Pembangunan (R&D)
01/01/2016 - 31/12/2017 Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/05/2016 - 30/04/2017 Timbalan Dekan (Penyelidikan & Pembangunan)
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Penyelidikan Dan Pembangunan (R&D)
01/05/2015 - 30/04/2016 Timbalan Dekan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Penyelidikan Dan Pembangunan (R&D)
01/01/2013 - 31/12/2015 Penyelidik
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/05/2014 - 30/04/2015 Timbalan Dekan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Penyelidikan Dan Pembangunan (R&D)
01/05/2013 - 30/04/2014 Timbalan Dekan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Penyelidikan Dan Pembangunan (R&D)
16/08/2012 - 30/04/2013 Timbalan Dekan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Inovasi, Pengkomersilan Dan Perundingan (ICC)
01/05/2012 - 15/08/2012 Ketua Jabatan
Pejabat Strategik Dan Komunikasi Korporat, Jabatan Pengurusan Data
01/05/2010 - 30/04/2012 Ketua Jabatan
Pejabat Strategik Dan Komunikasi Korporat, Jabatan Pengurusan Data
01/05/2004 - 30/04/2006 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Pembuatan dan Industri (JKPI)

VK7 Profesor

YearDescriptionRoleLevel
01/01/2014 - 31/12/2014 International Journal of Engineering (IJE)
Editorial Board Antarabangsa
29/08/2017 - 30/06/2018 ENSEARCH
Council Member Committee Kebangsaan
01/01/2013 - 31/12/2013 ENSEARCH
Ahli Kebangsaan
01/08/2011 - 31/07/2012 International Solid Waste Association (ISWA)
AHLI Antarabangsa
01/08/2017 - 31/08/2018 International Solid Waste Association (ISWA)
Ahli Antarabangsa
09/01/2010 - 08/01/2011 International Solid Waste Association (ISWA)
AHLI Antarabangsa
01/08/2018 - 31/08/2019 International Solid Waste Association (ISWA)
Ahli Antarabangsa
01/08/2012 - 01/08/2013 International Solid Waste Association (ISWA)
AHLI Antarabangsa
01/08/2014 - 31/07/2015 International Solid Waste Association (ISWA)
AHLI Antarabangsa
01/08/2015 - 31/08/2016 International Solid Waste Association (ISWA)
Ahli Antarabangsa
01/08/2016 - 31/08/2017 International Solid Waste Association (ISWA)
Ahli Antarabangsa
26/07/2022 - 31/12/9999 International Society for Development and Sustainability (ISDS)
Lifetime Fellow Member Antarabangsa
01/01/2004 - 31/12/2004 Design of Experiment Society (DOES)
DESIGN OF EXPERIMENT SOCIETY (DOES)
Ahli Antarabangsa
31/03/2000 - 31/12/9999 Board of Engineers Malaysia (BEM)
SOCIETY OF MANUFACTURING ENGINEERS (SME)
Jurutera Siswazah Kebangsaan
01/01/2000 - 31/12/2000 Society of Manufacturing Engineers (SME)
BOARD OF ENGINEERS MALAYSIA (BEM)
Ahli Antarabangsa
01/01/1998 - 31/12/1998 The Institution of Engineers, Malaysia (IEM)
INSTITUTE OF ENGINEERS MALAYSIA (IEM)
Ahli Kebangsaan

YearDescriptionLevel
2022 Entrepreneurship [BNJ21002], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2021 Faculty External Examiner for Penilai Luar Fakulti Program Akademik Ijazah Sarjana Muda, Fakulti Kej. Pembuatan & Mekatronik, UMP, Malaysia, March 2021 National
2021 Manufacturing Technology [BDA30502], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 University
2020 Design For Manufacturing & Asemmble [BDD40103], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 University
2020 Design For Manufacturing & Asemmble [BDD40103], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 University
2020 Design For Manufacturing Assembly [MDP10503], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 University
2019 Design For Manufacturing & Asemmble [BDD40103], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 Design For Manufacturing & Asemmble [BDD40103], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 University
2018 Design For Manufacturing & Asemmble [BDD40103], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Design For Manufacturing & Asemmble [BDD40103], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2017 Design For Manufacturing & Asemmble [BDD40103], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Reverse & Concurrent Engineering [BDD40503], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Design For Manufacturing & Asemmble [BDD40103], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Reverse & Concurrent Engineering [BDD40503], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2015 Advanced Machining Process [MDP10203], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Design For Manufacturing & Asemmble [BDD40103], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Design For Manufacturing & Asemmble [BDD40103], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Design For Manufacturing And Assembly [BDD4013], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Creativity And Innovation [BDU20902], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Design For Manufacturing & Asemmble [BDD40103], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Design For Manufacturing & Assembly [MDP10504], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Design For Manufacturing & Assembly [MDP10504], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Creativity And Innovation [BDU20902], Session 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Entrepreneurship [BPK20802], Session 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Advanced Machinery [BDD4073], Session 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Advanced Machining Process [MDP10203], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Creativity And Innovation [BDA10602], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2011 Advanced Machinery [BDD4073], Session 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Advanced Machining Process [MDP10203], Session 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Advanced Machining Process [MDP10203], Session 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Advanced Machining Process [MKM1303], Session 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Advanced Machining Process [MKM1303], Session 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Creativity And Innovation [BDA10602], Session 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Engineering Laboratory Iv [BDA27201], Session 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2010 Advanced Machinery [BDD4073], Session 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Management & Professional Ethics [BDA4042], Session 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University

CodeTitleDesignationEnd Date
K318 Characterization of Sparking Formation on electrical discharge machining (EDM) process when using modified RBD palm olein as a bio-dielectric fluid Ahli 30/04/2024
K371 Fracture mechanism characteristic augmentation of the PPNCGS nanocomposites via optimized injection molding processing condition Ahli 06/09/2023
K356 Prototype for Direct Recycling Aircraft Grade Aluminium using Rapid Hot Press Forging (RHPF) Ahli 31/07/2023
K197 Effects of the Operating Temperature and Operating Time in Direct Recycling Hot Press Forging of Aluminium Aircraft Component (AA7075) Ahli 31/05/2023
H608 Pembangunan Sistem Pengurusan Penyelidikan, Penerbitan dan Kepakaran UTHM Ahli 30/06/2022
K053 Effect of Quenching Rate in Hot Press Forming (HPF) toward AA7075 Aluminum Alloys Mechanical Strength Properties Ahli 31/03/2022
X166 Mechanical Properties and Sustainability studies of Recycled Aluminium for surgical tools application Ahli 16/02/2022
K041 Hydrothermal Alkaline Activation for sustainable and Economical Zeolite Synthesis Ahli 30/09/2021
H137 The Effect of Hot Press Forming (HPF) Process Parameters towards Mechanical Strength Properties of Aluminium Alloy AA7075 Ahli 31/12/2020
H239 Utilizing Cockle Shell Waste as an Abrasive Particle for Toothpaste Application Ahli 31/12/2020
H217 Redesigning of Agarwood Oil Extraction System for Cost Reduction Using DFMA Method Ahli 30/12/2020
H249 Multiresponse Optimization and Environmental Analysis in Sustainable Direct Recycling of Aluminium Aircraft Component (AA7075) Ahli 30/09/2020
T001 Tajuk Program:Antifouling Enchancement for membrance water separation performance via iosynthesis additive and second order Back Propagation Neural Network (BPNN) optimization technique Tajuk Projek : Antifouling study of the ZnO bio-synthesis polymer mixed matric membrane using various natural organic matter (NOM) medium Ahli 31/08/2020
H008 Fabrication of TiO2 nanoflowers powder to prevent cracking problem in ceramics industry Ahli 30/06/2020
U831 Effect of the reinforced materials in direct-recycling ofAA7075 aluminium by hot press forging Ketua 29/02/2020
U931 Effects of Reinforced Materials in Functional Performance of Solid-State Recycling Aluminium Alloy by Hot Equal Channel Angular Pressing (ECAP) Method Ahli 31/10/2019
U664 Development Of New Modules For Integrating RMS and SMPU Ketua 30/09/2019
U720 Effect of the reinforced materials in functional performance of the solid-state recycling AA6061 aluminium by hot extrusion Ketua 30/09/2019
U436 Integrated Research Management System Towards Excellence In Managing Research And Innovation For Sustainable Development Ahli 31/08/2019
1586 Parameter Correlation and Mechanism in Catalytic Erosion of Polycrystalline Diamond Ahli 31/07/2019
1596 A New Approach of Recycling Aluminium Alloy Chip (AA6061) Integrated With Particulate Silicon Carbide as an Alternative Metal Matrix Composite Material Ahli 31/07/2019
1496 Determination of Functional Performance and Life Cycle Assessment in Sustainable Recycling Automotive Aluminium Scrap using Hot Press Forging Ketua 30/11/2018
U525 Co-Incineration of Oil Palm Biomass And Automative Shredder Residue (ASR) In Swirling Fluidized Bed Incinerator (SFBI) Ahli 30/06/2018
U531 Catalytic Aided Electrical Discharge Machining of Polycrystalline Diamond Tools Ahli 31/03/2018
1463 THE OPTIMIZATION OF HOT EXTRUSION PARAMETERS IN DIRECT RECYCLING OF ALUMINIUM SCRAP Ketua 31/12/2017
1467 Tribological characteristic of additive effect in palm oil based Trimethylolpropane (TMP) ester for sustainable metalworking lubricant Ahli 31/12/2017
U396 The Influence Of Industrial Activities On The Level Of Ambient Air Quality In UTHM Campus Ahli 15/12/2017
U358 The Microstructure and Mechanical Properties of Aluminium Chips (AL6061) Composite Reinforced With Alumina Particles Ahli 30/11/2017
U399 Processability Of Waste Fish Scales Via Powder Injection Molding For Implant Application Ahli 31/03/2017
1511 Feasibility investigation of waste derived hydroxpatite/Uhmwpe composite for biomedical applications Ahli 26/01/2017
1426 The Relationship of The Chip Size with Oxide Precipitation on The Mechanical and Physical Properties of The Recycled Aluminum Alloy (AA6061) in Hot Press Forging Ketua 30/11/2016
B060 THE HYDROCARBON FROM MICROALGAE VIA PHYCOREMEDIATION Ahli 31/10/2016
1309 E-waste Managemant Opportunities and Constraint in Johor : A Survey in Batu Pahat and Kluang Ahli 31/08/2016
B052 Ultrasonic Vibration Assistion Micro-Machining Table (UVAM) Ahli 24/08/2016
U332 Modeling and Simulation in Direct Recycling of Aluminium (AA6061) Ketua 31/07/2016
U259 Insentif Kecemerlangan Penyelidikan dan Inovasi 2014 Ahli 31/05/2016
R012 Design and Develop A Vibration Assistted Micro-Milling Prototype Ahli 15/12/2015
U047 Hot Press Forging In Direct Recycling Of Automotive Waste Materials Aluminium (AA6061) Ketua 31/10/2015
1058 Characterization of Mist Flow of Minimal Quantity Lubrication Technique in Machining Process Ahli 14/10/2015
1218 Characterization of Supercritical Carbon Dioxide Cooling Technique in Machining Process Ahli 30/09/2015
S020 Laser Assisted Micro - Milling Of Biomaterial For Implant Parts Ahli 31/07/2015
C056 Advanced Manufacturing And Material Center (AMMC), UTHM Ahli 28/02/2015
C016 Tajuk Program : Sustainable Integrated Direct Recycling Of Aluminium Industrial Waste Tajuk Projek : Hot Press Forging And Hot Extrusion For Direct Recycling Chip Aluminium Ketua 31/12/2014
C017 Tajuk Program : Sustainable Integrated Direct Recycling Of Metal Waste Management Tajuk Projek : Managing Reduction Of Energy Consumption & Carbon Emission : Case Of Aluminium-based Industry Ahli 31/12/2014
C021 Tajuk Program : Enhancing Bio Based Lubricant Production Through Innovative Research Tajuk Projek : Potential Use Of The Derived Synthetic Esters As Biolubricants In machining Applications Ahli 31/12/2014
C027 Tajuk Program : Competitive Sustainable Manufacturing Framework For Malaysia Tajuk Projek :Sustainable Non-Traditional Machining Process For Composite Tool Ahli 31/12/2014
1247 Influence of Tin (Stanum) On Microstructure and Mechanical Behaviour of Direct Recycled Aluminum Alloy Ahli 31/08/2014
1193 Hot Extrusion In Direct Recycling Of aluminium AA6061 Ketua 28/02/2014
0886 High Productivity in Electrical Discharge Machining (HPEDM) of Difficult-to-Cut Materials Ketua 31/01/2014
0828 Direct Recycling of Automotive Scrap Material (Al 6060) in High Speed Machining Process - Propose Waste to Resources Ketua 31/12/2013
0749 Sustainability Of E-Product Recycling: Propose National Framework, Model And Policy Ahli 31/08/2013
0829 An Advanced Approach to Analyze the Coating Tool Wear in Dry Milling of Die Material Ahli 30/06/2013
0872 Direct recycling automotive scrap material (AI 6060) in high speed machining process - propose waste to resources Ketua 31/12/2012
0873 Surface modification in electrical discharge machining of AISI D2 tool steel using powder metallurgy electrode Ketua 31/12/2012
0813 Tool Wear Perfoemance & Surface Integrity In High Speed Machining Of Mold & Die Materials Ketua 31/05/2012
0785 The surface morphology of AISI D2 hardened steel by electrical discharge machining (EDM) Ketua 14/03/2012
C002 Kajian "Graduate Employability (GE) Graduan Universiti Tun Hussein Onn Malaysia (UTHM) Ahli 31/12/2010

Book
NUR KAMILAH YUSUF, MOHD AMRI LAJIS, AZLAN AHMAD
(2019) Hot Press Forging : A Sustainable Direct Recycling Of Aluminium, UTHM , 1, ISBN:9789672216865
Mohd Amri Bin Lajis
(2011) Heat Assisted Machining Of Hardened Steel Aisi D2, IIUM Press , 1, ISBN:9789675272943
Book Chapters
Sami. Al-Alimi, M. A. Lajis, S. Shamsudin, B. L. Chan, Mohammed. H. Rady, Musleh Al-Zeqri, Ahmed Wahib, Abdalkarim Aladani, Abdulaziz Ali, Nur Kamilah Yusuf
(2021) Response Surface Methodology (Rsm) Implementation In Zro2 Particles Reinforced Aluminium Chips By Hot Equal Channel Pressing (Ecap), Intelligent Manufacturing And Mechatronics, SpringerLink , 959, ISBN:9789811608650
A. Wagiman, Mohd Sukri Mustapa, S. Shamsudin, Mohd Amri Lajis, R. Asmawi, M. A. Harimon, Farazila Yusof and Mohammed H. Rady
(2019) Effect Of Chip Treatment On Chip-Based Billet Densification In Solid-State Recycling Of New Aluminium Scrap, Advances In Material Sciences And Engineering, Springer, Singapore , 327, ISBN:9789811382970
A. Wagiman, Mohd Sukri Mustapa, S. Shamsudin, Mohd Amri Lajis, R. Asmawi, M. A. Harimon, Farazila Yusof & Mohammed H. Rady
(2019) Lecture Notes In Mechanical Engineering: Advances In Material Sciences And Engineering, Effect Of Chip Treatment On Chip-Based Billet Densification In Solid-State Recycling Of New Aluminium Scrap, Springer Singapore , 327, ISBN:9789811382963
Said Ahmad, Richard Ngalie Chendang, Mohd Amri Lajis, Aiman Supawi, Erween Abd Rahim
(2019) Machinability Performance Of Rbd Palm Oil As A Bio Degradable Dielectric Fluid On Sustainable Electrical Discharge Machining (Edm) Of Aisi D2 Steel, Advances In Material Sciences And Engineering: Lecture Notes In Mechanical Engineering (Lnme), Springer, Singapore , 509, ISBN:9789811382970
Huda M. Sabbar, S. Shamsudin, Mohammed Abdulridha Abbas, Muntadher S. Msebawi, Mohd Sukri Mustapa, Mohd Amri Lajis, Mohammed H. Rady and Sami Al Alim
(2019) Study On The Wear Influence For Recycled Aa6061 Aluminum/Al2o3 Utilizing The Face Central-Full Factorial Technique (Fcfft), Advances In Material Sciences And Engineering, Springer, Singapore , 599, ISBN:9789811382
Journal
C. S. Ho, M. K. Mohd Nor, M. A. Lajis, M. S. A. Samad
(2022) Damage Characteristics Of Recycled Aluminium Alloys Aa6061 Undergoing Finite Strain Deformation Of Tensile Loading, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING , UTHM , 6, 1, ISSN:2229838X
Nasha Emieza Ruhaizat , Nur Kamilah Yusuf , Mohd Amri Lajis , Sami Al-Alimi , Shazarel Shamsudin , Ikhwan Shah Tisadi Tukiat and Wenbin Zhou
(2022) Effect Of Direct Recycling Hot Press Forging Parameters On Mechanical Properties And Surface Integrity Of Aa7075 Aluminum Alloys, METALS, MDPI , 9, 1, ISSN:2075-470
Sami Al-Alimi, Mohd Amri Lajis, Shazarel Shamsudin, Nur Kamilah Yusuf, Boon Loong Chan, Djamal Hissein Didane, Mohammed H. Rady, Huda M. Sabbar, Munthader S. Msebawi
(2021) Development Of Hot Equal Channel Angular Processing (Ecap) Consolidation Technique In The Production Of Boron Carbide(B4c)-Reinforced Aluminium Chip (Aa6061)-Based Composite, THE INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT, THE INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT , 8, 347, ISSN:27164519
Abdullah Wagiman, Mohammad Sukri Mustapa, Mohd Amri Lajis, Shazarel Shamsudin, Mahmod Abd Hakim, Rosli Asmawi
(2021) Effect Of Thermally Formed Alumina On Density Of Almgsi Alloys Extrudate Recycled Via Solid State Technique, JOURNAL OF ADVANCE RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCE,JANUARY, AKADEMIA BARU , 11, 137, ISSN:28113950
Sami Al-Alimi, Mohd Amri Lajis, Shazarel Shamsudin, Nur Kamilah Yusuf, B. L. Chan, Didane Djamal Hissein, Mohammed H. Rady, Muntadher Sabah Msebawi,Huda Mohammed Sabbar
(2021) Hot Extrusion Followed By A Hot Ecap Consolidation Combined Technique In The Production Of Boron Carbide (B4c) Reinforced With Aluminium Chips (Aa6061) Composite, MATERIALI IN TEHNOLOGIJE, MATERIALI IN TEHNOLOGIJE , 1, 347, ISSN:15803414
N.K. Yusuf1, M.A. Lajis1, A. Ahmad
(2021) Life Cycle Assessment On The Direct Recycling Aluminium Alloy Aa6061 Chips And Metal Matrix Composite (Mmc-Alr), THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE), UTHM , 9, 95, ISSN:26007916
N.K. Yusuf, A. S. Medi, M.A. Lajis, B. L. Chan, S. Shamsudin
(2021) Mechanical Properties Of Direct Recycling Metal Matrix Composite (Mmc-Alr) Aa7075 Aircraft Aluminium Alloy, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE) , UTHM , 9, 89, ISSN:2229838X
Sami Al-Alimi, M.A. Lajis, S. Shamsudin, B.L. Chan, Yahya Mohammed, Al Emran Ismail, N. M. Sultan
(2020) Development Of Metal Matrix Composites And Related Forming Techniques By Direct Recycling Of Light Metals: A Review, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 1, 144, ISSN:26007916
Abdullah, W., Mohammad Sukri, M., Mohd Amri, L., Shazarel, S., Mohd Idrus, M.M., Mohammed, H.R.
(2020) Direct Recycling Of Aluminium Chips Into Composite Reinforced With In Situ Alumina Enrichment, MATERIAL SCIENCE FORUM, TRANS TECH PUBLICATIONS LTD , 1, 165, ISSN:02555476
Mohammed Hussien Rady, Mohammad Sukri Mustapa, Abdullah Wagiman, Shazarel Shamsudin, Mohd Amri Lajis, Sami Al Alimi, Mohamad Norani Mansor, Mohd Azhar Harimon
(2020) Effect Of The Heat Treatment On Mechanical And Physical Properties Of Direct Recycled Aluminium Alloy (Aa6061), INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING , UTHM , 2, 82, ISSN:2229838X
Mohammed Hussien Rady, Mohammad Sukri Mustapa, Abdullah Wagiman, Shazarel Shamsudin, Mohd Amri Lajis, Sami Al Alimi, Mohamad Norani Mansor, Mohd Azhar Harimon
(2020) Effect Of The Heat Treatment On Mechanical And Physical Properties Of Direct Recycled Aluminium Alloy (Aa6061), INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING(IJIE), UTHM , 2, 82, ISSN:2229838X
Abdullah Wagiman, Mohammad Sukri Mustapa, Shazarel Shamsudin, Mohd Amri Lajis, Rosli Asmawi, Mohammed H Rady, & Mohd Shahir Yahya
(2020) Effect Of Thermally-Treated Chips On Density Of Almgsi Alloys Recycled Using Solid-State Technique, PROCESSES, MDPI , 11, 1, ISSN:22279717
Nor Ain Jamil Hosni and Mohd Amri Lajis
(2020) Experimental Investigation And Economic Analysis Of Surfactant (Span-20) In Powder Mixed Electrical Discharge Machining (Pmedm) Of Aisi D2 Hardened Steel, MACHINING SCIENCE AND TECHNOLOGY, TAYLOR & FRANCIS , 5, 398, ISSN:15322483
AZLAN AHMAD, MOHD AMRI LAJIS, NUR KAMILAH YUSUF, SYAIFUL NIZAM AB RAHIM
(2020) Statistical Optimization By The Response Surface Methodology Of Direct Recycled Aluminum-Alumina Metal Matrix Composite (Mmc-Alr) Employing The Metal Forming Process , PROCESSES, MDPI , 7, 1, ISSN:22279717
Mohammed Abdulridha Abbas, Mohd Amri Lajis, Ghassan Shaker Abdul Ridha
(2019) A New Methodology For Predicting Quantity Of Agglomeration Between Electrodes In Pmedm Environment, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET), IAEME Publication , 2, 1461, ISSN:09766340
Abdullah Wagiman, Mohammad Sukri Mustapa, Rosli Asmawi, Shazarel Shamsudin, Mohd Amri Lajis, Yoshiharu Mutoh
(2019) A Review On Direct Hot Extrusion Technique In Recycling Of Aluminium Chips, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, SPRINGER NATURE , 11, 641, ISSN:02683768
C. S. Ho, M. A. Ab Rani, M. K. Mohd Nor, N. Maat, M. T. Hameed Sultan, M. A. Lajis, N. K. Yusuf
(2019) Characterization Of Anisotropic Damage Behaviour Of Recycled Aluminium Alloys Aa6061 Undergoing High Velocity Impact, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 247, ISSN:2229838X
M.H. Rady, M.S. Mustapa, M.A. Harimon2, M.R. Ibrahim, S. Shamsudin, M.A. Lajis, A. Wagiman, M.S. Msebawi, F. Yusof
(2019) Effect Of Hot Extrusion Parameters On Microhardness And Microstructure In Direct Recycling Of Aluminium Chips, MATERIAL SCIENCE AND ENGINEERING TECHNOLOGY , Wiley-VCH Verlag , 6, 718, ISSN:09335137
Mohammed H Rady, M.S. Mustapa, S. Shamsudin, M. A. Lajis & A. Wagiman
(2019) Microhardness And Microstructure Of Hot Extrusion Parameters In Direct Recycling Of Aluminium Chip (Aa 6061) By Anova Method, JOURNAL OF PHYSICS: CONFERENCE SERIES, INSTITUTE OF PHYSICS PUBLISHING , 3, 1, ISSN:17426588
Hosni, N.A.J. and M.A. Lajis
(2019) Multi-Response Optimization Of The Machining Characteristics In Electrical Discharge Machining (Edm) Using Span-20 Surfactant And Chromium (Cr) Powder Mixed, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Wiley-VCH Verlag , 3, 329, ISSN:15214052
Nur Kamilah Yusuf , Mohd Amri Lajis, Azlan Ahmad
(2019) Multiresponse Optimization And Environmental Analysis In Direct Recycling Hot Press Forging Of Aluminum Aa6061, MATERIALS (1996-1944), MDPI , 6, 1, ISSN:19961944
S Kuddus, M S Mustapa, M R Ibrahim, S Shamsudin, M A Lajis and A Wagiman
(2019) Physical Characteristics Of Solid State Recycled Aluminum Chip Aa6061 Reinforced With Silicon Carbide (Sic) By Using Hot Extrusion Technique, JOURNAL OF PHYSICS: CONFERENCE SERIES, INSTITUTE OF PHYSICS PUBLISHING , 3, 1, ISSN:17426588
Tijjani Abdullahi, Zawati Harun, Mohd Hafiz Dzarfan Othman, Khairul Nazri Yusof, Ainun Rahmawati, Muhamad Zaini Yunos, Mohd Amri Lajis, Yusri Yusof
(2019) Preliminary Studies On Hydrothermal Synthesis Of Zeolite From Malaysian Kaolinite Clays, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, UTM press , 6, 78, ISSN:2289599X
Muntadher S. Msebawi , Jayaprakash Murugesan, Shazarel Shamsudin, Mohammad Hussein Rady, Huda M. Sabbar, Mohammad Sukri Mustapa, Mohd Amri Lajis, Mohammed Abdulridha Abbas
(2019) Strength Performance Of Micro Alumina Reinforced Direct Recycled Aa6061 Chips Based Matrix Composite, MATERIALS SCIENCE FORUM, TRANS TECH PUBLICATIONS LTD , 7, 73, ISSN:02555476
Kamaruddin Kamdani *, Sulaiman Hasan, Ahmad Farid Irfan Ahmad Ashaary, Mohd Amri Lajis,
(2019) Study On Tool Wear And Wear Mechanisms Of End Milling Nickelbased Alloy, JURNAL TRIBOLOGI 21 (2019) 82-92, MALAYSIAN TRIBOLOGY SOCIETY , 1, 82, ISSN:22897232
S H SANUSI
(2019) The Efficiency Of Dentifrice Abrasive Particles Under Different Tooth-Brushing Parameter , TEST ENGINEERING AND MANAGEMENT, MATTINGLEY PUBLISHING CO., INC. , 11, 747, ISSN:01934120
Azlan Ahmad , Mohd Amri Lajis, Shazarel Shamsudin, and Nur Kamilah Yusuf
(2018) Conjectured The Behaviour Of A Recycled Metal Matrix Composite (Mmc-Alr) Developed Through Hot Press Forging By Means Of 3d Fem Simulation, MATERIALS , MDPI AG , 6, 1, ISSN:19961944
Nur kamilah binti yusuf
(2018) Conjectured The Behaviour Of A Recycled Metal Matrix Composite (Mmc-Alr) Developed Through Hot Press Forging By Means Of 3d Fem Simulation , MATERIALS , MDPI , 6, 1, ISSN:19961944
Azlan Ahmad, Mohd Amri Lajis, Shazarel Shamsudin, Nur Kamilah Yusuf
(2018) Integrating Simulation With Experiment For Recycled Metal Matrix Composite (Mmc-Alr) Developed Through Hot Press Forging, KEY ENGINEERING MATERIALS, Trans Tech Publications , 8, 493, ISSN:1662-979
Said Ahmad, Mohd Amri Lajis, Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Mohd Fahrul Hassan
(2018) Surface Roughness And Surface Topography Of Inconel 718 In Powder Mixed Dielectric Electrical Discharge Machining (Pmedm) , INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 181, ISSN:2229838X
M.A. Lajis, N.A.J. Hosni
(2018) The Influences Of Various Mixed Dielectric Fluids On The Performance Electrical Discharge Machining Of Aisi D2 Hardened Steel:, MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , Wiley-VCH Verlag , 4, 413, ISSN:09335137
Chan, B.L., Lajis, M.A.
(2017) Direct Recycling Of Aluminium 6061 Chip Through Cold Compression, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, Engg Journals Publications , 9, 43, ISSN:23198613
Nur Kamilah Yusuf, Mohd Amri Lajis and Azlan Ahmad
(2017) Hot Press As A Sustainable Direct Recycling Technique Of Aluminium: Mechanical Properties And Surface Integrity, MATERIALS, MDPI AG , 8, 1, ISSN:19961944
Nur Kamilah Yusuf, Mohd Amri Lajis and Azlan Ahmad
(2017) Hot Press As A Sustainable Direct Recycling Technique Of Aluminium: Mechanical Properties And Surface Integrity , MATERIALS, MDPI , 8, 1, ISSN:19961944
M.A. Lajis, A. Ahmad, N.K. Yusuf, A.H. Azami and A. Wagiman
(2017) Mechanical Properties Of Recycled Aluminium Chip Reinforced With Alumina (Al2o3) Particle, MATERIALS SCIENCE & ENGINEERING TECHNOLOGY MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, Wiley-VCH Verlag GmbH , 4, 1, ISSN:09335137
Lajis M.A., Ahmad A., Yusuf N.K., Azami A.H., Wagiman A.
(2017) Mechanical Properties Of Recycled Aluminium Chip Reinforced With Alumina (Al2o3) Particle: Mechanische Eigenschaften Von Mit Aluminiumoxid (Al2o3) Verstärkten Recycelten Aluminiumspänen , MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , Wiley-VCH Verlag , 4, 306, ISSN:9335137
Ahmad A., Lajis M.A., Yusuf N.K.
(2017) On The Role Of Processing Parameters In Producing Recycled Aluminum Aa6061 Based Metal Matrix Composite (Mmc-Alr) Prepared Using Hot Press Forging (Hpf) Process, MATERIALS, MDPI , 9, 1, ISSN:19961944
Ahmad A., Lajis M.A., Yusuf N.K., Shamsudin S., Zhong Z.W.
(2017) Parametric Optimisation Of Heat Treated Recycling Aluminium (Aa6061) By Response Surface Methodology , AIP CONFERENCE PROCEEDINGS , American Institute of Physics Inc. , 9, 1, ISSN:0094243X
Said Ahmad, Erween Abd Rahim, Mohd Amri Lajis & Mohd Rasidi Ibrahim
(2017) Powder Mixed Dielectric In Electrical Discharge Machining Of Inconel 718, JOURNAL OF MECHANICAL ENGINEERING , Universiti Teknologi Mara , 10, 110, ISSN:18235514
Shamsudin, S., Lajis, M.A., Zhong, Z.W., Ahmad, A., Wagiman, A.
(2017) Weld Strength In Solid-State Recycling Of Aluminium Chips, MATERIAL SCIENCE AND ENGINEERING TECHNOLOGY, John Wiley and Sons , 4, 290, ISSN:09335137
Ahmed Sahib Mahdi, Mohammad Sukri Mustapa, Mohammad Amry Lajis, Mohd Warikh Abd Rashid
(2016) Effect Of Compaction Pressure On Mechanical Properties Of Aluminium Particles Sizes Aa6061 Al Alloy Through Powder Metallurgical Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 4, 5155, ISSN:18196608
S. N. Ab Rahim, M. A. Lajis and S. Ariffin
(2016) Effect Of Extrusion Speed And Temperature On Hot Extrusion Process Of 6061 Aluminum Alloy Chip, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 2272, ISSN:18196608
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mohd Amri Lajis, and Mohd Warikh Abd Rashi
(2016) Effect Of Sintering Temperature On Compression Strength And Microhardness Of Recycling Aluminium Alloy Aa6061 Through Ball Mill Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, APRN , 1, 659, ISSN:18196608
A. Ahmad, M. A. Lajis, N. K. Yusuf and A. Wagiman
(2016) Hot Press Forging As The Direct Recycling Technique Of Aluminium- A Review, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 1, 2258, ISSN:18196608
Ahmad A., Lajis M.A., Yusuf N.K., Wagiman A.
(2016) Hot Press Forging As The Direct Recycling Technique Of Aluminium- A Review , ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , Asian Research Publishing Network , 5, 2258 , ISSN:18196608
Radin Maya Saphira Radin Mohamed,NMS Nizam, AA Al-Gheethi, A Lajis, AHM Kassim
(2016) Particulate Matter Levels In Ambient Air Adjacent To Industrial Area, PARTICULATE MATTER LEVELS IN AMBIENT AIR ADJACENT TO INDUSTRIAL AREA, IOP Conference Series , 7, 012056, ISSN:1757-899X
Mohd Sukri Mustapa, Ahmed Sahib Mahdi, Mohd Amri Lajis, Mohd Warikh Abd Rashid
(2016) Physical Properties Of Recycling Milled Aluminium Chip (Aa6061) For Various Sintering Temperature, INTERNATIONAL JOURNAL OF MECHANICAL AND INDUSTRIAL TECHNOLOGY, Springer , 10, 33, ISSN:23487593
Shazarel Shamsudin, MA Lajis and ZW Zhong
(2016) Solid-State Recycling Of Light Metals: A Review, ADVANCES IN MECHANICAL ENGINEERING, SAGE , 1, ISSN:16878132
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mohd Amri Lajis, Mohd Warikh Abd Rashid
(2016) The Effect Of Cold Compacting Parameter For Producing Recycles Aluminium By Milling Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 5, 6465, ISSN:18196608
S. Shamsudin, Z. W. Zhong, S. N. Ab Rahim, M. A. Lajis
(2016) The Influence Of Temperature And Preheating Time In Extrudate Quality Of Solid-State Recycled Aluminum, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Springer , 13, ISSN:2683768
M.A. Lajis
(2015) An Electrical Discharge Machining (Edm) Of Inconel 718 Using Copper Tungsten Electrode With Higher Peak Current And Pulse Duration, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING IJMME-IJENS, IJENS , 10, 39, ISSN:15058383
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mohd Amri Lajis, Mohd Warikh Abd Rashid
(2015) Compression Strength And Microhardness Of Recycling Milled Aluminium (Aa6061) For Various Binder, INTERNATIONAL JOURNAL OF MECHANICAL AND INDUSTRIAL TECHNOLOGY, Springer , 1, 98, ISSN:23487593
Ahmed Sahib Mahdi, Mohammad Sukri Mustapa, Mohammad Amry Lajis, Mohd Warikh Abd Rashid
(2015) Effect Of Compaction Pressure On Physical Properties Of Milled Aluminium Chip (Aa6061), INTERNATIONAL JOURNAL OF SCIENCE AND RESEARCH (IJSR), IJSR , 8, 1759, ISSN:23197064
Ahmed Sahib Mahdi, Mohammad Sukri Mustapa, Mohd Amri Lajis
(2015) Effect Of Holding Time On Mechanical Properties Of Recycling Aluminium Alloy Aa6061 Through Ball Mill Process, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY, IAEME Publication , 9, 133, ISSN:09766359
Abdullah Wagiman, Md Saidin Wahab, Mohd Amri Lajis, Azuddin Mamat
(2015) Improving Surface Smoothness Of Aluminium Alloys Multi-Bead Weld For Welding Rapid Forming Application, INTERNATIONAL INTEGRATED ENGINEERING SUMMIT 2014, Trans Tech Publications , 7, 216, ISSN:16627482
M.A. Lajis, S. Ahmad
(2015) Machinability Performance Of Powder Mixed Dielectric In Electrical Discharge Machining (Edm) Of Inconel 718 With Copper Electrode, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, IJENS , 8, 37, ISSN:2077-124x
Said Ahmad and Mohd Amri Lajis
(2014) Effect Of Higher Peak Current And Pulse Duration On Ewr Of Copper Electrode When Electrical Discharge Machining (Edm) Of Inconel 718, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 12, 945, ISSN:16628985
M.A. Lajis, S.S. Khamis , N.K. Yusuf
(2014) Optimization Of Hot Press Forging Parameters In Direct Recycling Of Aluminium Chip (Aa 6061) , KEY ENGINEERING MATERIALS, 10139826 , 12, 223 , ISSN:10139826
Fuziana, Y.F., Warikh, A.R.M., Lajis, M.A., Azam, M.A., Muhammad, N.S.
(2014) Recycling Aluminium (Al 6061) Chip Through Powder Metallurgy Route, MATERIALS RESEARCH INNOVATION, Maney Publishing , 12, 354, ISSN:14328917
N.K. Yusuf, M.A. Lajis , M.I. Daud , M.Z. Noh
(2013) Effect Of Operating Temperature On Direct Recycling Aluminium Chips (Aa6061) In Hot Press Forging Process , APPLIED MECHANICS AND MATERIALS , Scientific.net , 8, 728, ISSN:16609336
Turnad L. Ginta,A.K.M. Nurul Amin, H.C.D. Mohd Radzi., Mohd Amri Lajis
(2009) Development Of Surface Roughness Models In End Milling Titanium Alloy Ti-6al-4v Using Uncoated Tungsten Carbide Inserts, EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH, European Journals Inc. , 3, 542, ISSN:1450202X
Ginta, T.L., Amin, A.K.M.N., Lajis, M.A., Karim, A.N.M., Radzi, H.C.D.M.
(2009) Improved Tool Life In End Milling Ti-6al-4v Through Workpiece Preheating, EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH, EuroJournals , 2, 384, ISSN:1450216X
Lajis, M.A., Mohd Radzi, H.C.D., Nurul Amin, A.K.M.
(2009) The Implementation Of Taguchi Method On Edm Process Of Tungsten Carbide, EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH, EuroJournals , 2, 609, ISSN:1450216X
Ginta, T.L., Amin, A.K.M.N., Radzi, H.C.D.M., Lajis, M.A.
(2009) Tool Life Prediction By Response Surface Methodology In End Milling Titanium Alloy Ti-6al-4v Using Uncoated Wc-Co Inserts, EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH, EuroJournals , 3, 533, ISSN:1450216X
Lajis, M.A., Karim, A.N.M., Amin, A.K.M.N., Hafiz, A.M.K., Turnad, L.G.
(2008) Prediction Of Tool Life In End Milling Of Hardened Steel Aisi D2, EUROPEAN JOURNAL OF SCIENTIFIC RESEARCH, EuroJournals , 8, 592, ISSN:1450216X
Mohd Amri Bin Lajis
(2005) The Development Of Cyber Manufacturing System In Kuittho For Smis Application, JURNAL SAINS & TEKNOLOGI KUITTHO, KUiTTHO , 3, nil, ISSN:20145631
Prosiding / Seminar
S. T. T. Ikhwan, N. K. Yusuf , M. A. Lajis , and E. A. Rahim
(2021) Case Study On Life Cycle Assessment Of Car Fenders (Steel Versus Polymer), SPRINGER , 299, ISBN:9789811595059
Ruhaizat, N.E., Yusuf, N.K., Lajis, M.A., A.K. Mazlan, Muktari, A.A., Ahmad, A.
(2021) Effect Of Hot Press Forging Parameter On Microstructural Analysis And Mechanical Properties In Direct Recycling Of Aluminium Aircraft Alloy (Aa7075), SPRINGER , 279, ISBN:9789811595059
M. L. Issek, M. K. Mohd Nor, C. S. Ho, M. A. Lajis
(2021) Materials Characterisation And Fracture Mechanism Of Recycled Aluminium Alloy Aa6061 Reinforced With Alumina Oxide, IOP PUBLISHING LTD. , 1, ISBN:17578981
C. S. Ho, M. K. Mohd Nor, N. Maat, K. Y. Alaric Sim, M. N. Ibrahim, S. Jamian, M. A. Lajis, N. K. Yusuf
(2020) Damage Initiation And Evolution Analysis Of Hot Extruded Recycled Aluminium Alloys (Aa6061), IOP PUBLISHING , 1, ISBN:1757899X
M.H. Rady, A.S. Mahdi, M.S. Mustapa, S. Shamsudin, M.A. Lajis, M.S. Msebawi, W.A. Siswanto and S.A. Alimi
(2019) Effect Of Heat Treatment On Tensile Strength Of Direct Recycled Aluminium Alloy (Aa6061), TRANS TECH PUBLICATIONS LTD, SWITZERLAND , 80, ISBN:02555476
S Ahmad, R N Chendang , A Supawi , M A Lajis and M H K Zaman
(2019) Material Removal Rate And Machining Accuracy Of Electrical Discharge Machining (Edm) Of Inconel 718 Using Copper Electrode , IOP PUBLISHING , 1, ISBN:1757899X
Mohammed H Rady, Mohd Sukri Mustapa, S Shamsudin, M A Lajis and A Wagiman
(2019) Microhardness And Microstructure Of Hot Extrusion Parameters In Direct Recycling Of Aluminium Chip (Aa 6061) By Anova Method, IOP PUBLISHING , 1, ISBN:17426588
S Kuddus, MS Mustapa, MR Ibrahim, S Shamsudin, MA Lajis, A Wagiman
(2019) Physical Characteristics Of Solid State Recycled Aluminum Chip Aa6061 Reinforced With Silicon Carbide (Sic) By Using Hot Extrusion Technique, IOP PUBLISHING , 1, ISBN:17426588
M S Salim, M A Lajis, Z C Ros, A Nawawi, S Shamsudin, N K Yusuf
(2019) Redesigning Of Agarwood Extracting Machine Applying Dfma Principle, IOP PUBLISHING , 1, ISBN:17578981
Muntadher S. Msebawi, Jayaprakash Murugesan, Shazarel Shamsudin, Mohammed H. Rady, Huda M. Sabbar, Mohammad Sukri Mustapa, M. A Lajis, and Mohammed Abdulridha Abbas
(2019) Strength Performance Of Micro Alumina Reinforced Direct Recycled Aa6061 Chips Based Matrix Composite, TRANS TECH PUBLICATIONS LTD , 73, ISBN:02555476
K Kamdani, I Ashaary , S Hassan and M A Lajis
(2019) The Effect Of Cutting Force And Tool Wear In Milling Inconel 718, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
MOHD AMRI LAJIS, NUR KAMILAH YUSUF, AND AZLAN AHMAD
(2018) Life Cycle Assessment On The Effects Of Parameter Setting In Direct Recycling Hot Press Forging Of Aluminum, TRANS TECH PUBLICATIONS LTD , 143, ISBN:9783035712070
K. Kamdani, S. Hasan, A.F.I. Ahmad and M.A. Lajis
(2018) Study On Tool Wear And Wear Mechanism When End Milling Inconel 718 Using Tialn Coated Carbide, MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS) , 330, ISBN:9789671362525
N.A.J. HOSNI AND M.A. LAJIS
(2018) The Influence Of Span-20 Surfactant And Micro-/Nano-Chromium (Cr) Powder Mixed Electrical Discharge Machining (Pmedm) On The Surface Characteristics Of Aisi D2 Hardened Steel, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
S.N. Ab Rahim, M.A. Lajis
(2017) Effects On Mechanical Properties Of Solid State Recycled Aluminium 6061 By Extrusion Material Processing , Trans Tech Publication , 317, ISBN:10139826
S.N. Ab Rahim, M.A. Lajis
(2017) Mechanical Properties And Surface Integrity Of Recycling Aluminum 6061 By Hot Extrusion Process , Trans Tech Publication , 21, ISBN:02555476
A. Ahmad, M. A. Lajis, N.K. Yusuf, S. Shamsudin, and Z.W.Zhong
(2017) Parametric Optimisation Of Heat Treated Recycling Aluminium (Aa6061) By Response Surface Methodology, AMERICAN INSTITUTE OF PHYSICS , 020046-1, ISBN:9780735415652
Sami. Al-Alimi, M. A. Lajis, S. Shamsudin
(2017) Solid-State Recycling Of Light Metal Reinforced Inclusions By Equal Channel Angular Pressing: A Review, EDP SCIENCES , 1, ISBN:2261236X
S Shamsudin, MA Lajis,
(2016) Evolutionary In Solid State Recycling Techniques Of Aluminium: A Review, Elsevier , 256, ISBN:22128271
S.N.AB RAHIM, M.A. LAJIS; S. ARIFFIN
(2015) A Review On Recycling Aluminum Chips By Hot Extrusion Process, ELSEVIER B.V. , 761, ISBN:22128271
M.A. Lajis
(2014) A Sustainable Direct Recycling Of Aluminium Chip (Aa6061) In Hot Press Forging Employing Response Surface Methodology, Elsevier B.V. , ISBN:22128271
Mohd A.A., Laily S., Fatin A., Nur I.S.H., Mohd R.M., Manshoor B., Lajis M.A., Raja I., Mohd H., Taufik
(2014) The Performance Of Brass Electrode On Material Removal For Aluminium Composite In Edm Die-Sinking, TRANS TECH PUBLICATIONS LTD , 43, ISBN:9783038352785
S Ahmad and M A Lajis
(2013) Electrical Discharge Machining (Edm) Of Inconel 718 By Using Copper Electrode At Higher Peak Current And Pulse Duration, IOP PUBLISHING , 1, ISBN:1757899X
Mohd Amri Bin Lajis
(2012) A Comprehensive Study On Surface Roughness In Machining Of Aisi D2 Hardened Steel, ICAMME 2012
M.A. Lajis, A.K.M. Nurul Amin, A.N.M. Karim
(2012) Surface Integrity In Hot Machining Of Aisi D2 Hardened Steel, TRANS TECH PUBLICATIONS , 44, ISBN:10226680
Mohd Amri Bin Lajis
(2012) Tool Wear Performance Of Tialn/Alcrn Multilayer Coated Carbide Tool In Machining Of Aisi D2 Hardened Steel, ICKEM 2012
Mohd Amri Bin Lajis
(2011) Development Of Mathematical Cost Models For Preheated End-Milling Of Aisi D2 Tool Steel
Mohd Amri Bin Lajis
(2011) Development Of Mathematical Cost Models For Room Temperature End-Milling Of Aisi D2 Tool Steel
Mohd Amri Bin Lajis
(2009) Modelling And Optimization In End Milling Of Hardened Steel Aisi D2 Using Coated Carbide Inserts
Mohd Amri Bin Lajis
(2009) Performance Evaluation Of Pcbn In End Milling Of Hardened Steel Aisi D2 Under Room And Preheated Machining Conditions
Mohd Amri Bin Lajis
(2009) Surface Roughness And Surface Integrity Of End Milled Titanium Alloy Ti-6al-4v At Room Temperature And Preheated Machining
Mohd Amri Bin Lajis
(2009) Surface Roughness Modelling For End Milling Titanium Alloy Ti-6al-4v Under Room Temperature And Preheated Machining
Mohd Amri Bin Lajis
(2008) Experimental Investigation And Prediction Of Tool Life During Hot Milling Of Aisi H13 Tool Steel
Mohd Amri Bin Lajis
(2008) Hot Machining In End Milling Of Hardened Steel Aisi D2
Mohd Amri Bin Lajis
(2008) Machinability Improvement In End Milling Titanium Alloy Ti-6al-4v
Mohd Amri Bin Lajis
(2008) Modelling And Optimization Of Tool Life And Surface Roughness For End Milling Titanium Alloy Ti6al4v Using Uncoated Wc-Co Inserts
Mohd Amri Bin Lajis
(2008) Modelling And Optimization Of Tool Life In End Milling Of Aisi D2 Hardened Steel
Mohd Amri Bin Lajis
(2008) Performance Of Uncoated Wc-Co Inserts In End Milling Titanium Alloy Ti-6al-4v
Mohd Amri Bin Lajis
(2008) Prediction Of Surface Roughness In End Milling Of Preheated Ti6al4v Alloy Using Coupled Artificial Neural Network And Response Surface Methodology
Mohd Amri Bin Lajis
(2008) Preheated Machining In End Milling Of Hardened Steel Aisi D2
Mohd Amri Bin Lajis
(2008) Theoritical And Experimental Investigation In Prediction Of Tool Life In Preheated Machining Of Aisi D2 Hardened Steel
Mohd Amri Bin Lajis
(2008) Tool Life Improvement Of Uncoated Wc-Co Insert In End Milling Titanium Alloy Ti-6al-4v Through Workpiece Preheating
Mohd Amri Bin Lajis
(2008) Tool Life Prediction By Response Surface Methodology For End Milling Titanium Alloy Ti6al4v Using Pcd Inserts
Mohd Amri Bin Lajis
(2008) Tool Wear Morphology And Chip Segmentation In End Milling Titanium Alloy Ti6al4v
Mohd Amri Bin Lajis
(2007) Development Of Surface Roughness Prediction Model Using Response Surface Methodology In High Speed End Milling Of Aisi H13 Tool Steel
Mohd Amri Bin Lajis
(2007) Development Of Tool Life Prediction Model For Pcbn Inserts During The High Speed End Milling Of Aisi H13 Hardened Tool Steel
Mohd Amri Bin Lajis
(2007) Development Of Tool Life Prediction Model Of Tialn Coated Tools During The High Speed Hard Milling Of Aisi H13 Steel
Mohd Amri Bin Lajis
(2007) Effects Of Workpiece Preheating On Surface Roughness, Chatter And Tool Performance During End Milling Of Aisi D2 Tool Steel
Mohd Amri Bin Lajis
(2007) Experimental Investigation On Surface Roughness During End Milling Of Aisi H13 Hardened Tool Steel
Mohd Amri Bin Lajis
(2007) Modelling And Prediction Of Tool Life By Response Surface Methodology In Hard Milling Of Aisi D2 Tool Steel
Mohd Amri Bin Lajis
(2007) Prediction Of Surface Roughness In Hard Milling Of Aisi D2 Tool Steel
Mohd Amri Bin Lajis
(2006) Comparison Of Surface Roughness Between Non-Ferrous Metals At Low Constant Sliding Speed With Different Ball Diameters
Mohd Amri Bin Lajis
(2006) Development Of Al-Cu-Sicp Metal Matrix Composite For Automotive Application
Mohd Amri Bin Lajis
(2006) Influence Of Online Workpiece Heating On Chatter And Machinability Of Hardened Steel Aisi D2 In End Milling
Mohd Amri Bin Lajis
(2006) Surface Roughness And Cutting Forces While Machining Cr-Mo Alloy Steel Using Coated Ceramic Tool
Mohd Amri Bin Lajis
(2002) Machining Characteristics Of Tungsten Carbide Using Edm
Mohd Amri Bin Lajis
(2001) The Electrical Discharge Machining Of Tungsten Carbide

YearDescriptionLevel
2022 External Assessor / External Reviewer for External examiner MSc UTM - Lee Ke Yin, FKM, UTM, Malaysia, March 2022 National
2022 Keynote Speaker for ORCA International Conference on Mechanical, Materials and Industrial Engineering (OIC-MMIE) 2022, ORCA Institute, Indonesia, June 2022 International
2022 External Examiner for External examiner PhD viva - Siti Salwa Khamis, Kulliyyah of Engineering, IIUM, Malaysia, April 2022 National
2022 External Examiner for Phd Examiner ?EXPERIMENTAL INVESTIGATIONS ON MARAGING STEEL METAL DEPOSITION USING DIRECT METAL LASER SINTERING?, Andhra University, India, India, May 2022 International

YearDescription
2021 Examiner for Abdul Aziz Shabudin Bin Sirajuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Andy Liew Li Shen, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Hishamuddin Bin Md Rashid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Nur Fadhliudin Bin Jamaluddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Ng Zhen Zhang, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Norhamizi Arief Bin Abdullah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Nurul Hani Afiqah Binti Mohd Said, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Samuel Moses A/L Moheneswaran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 External Assessor / External Reviewer for Panel Penilai Luar Kenaikan Pangkat Prof Madya - Dr Izwan Ismail, UMP, Malaysia, June 2021
2021 External Assessor / External Reviewer for Panel Penilai Luar Kenaikan Pangkat Prof Madya - Dr. Alias Mohd, FTK, UC-TATI, Malaysia, March 2021
2021 External Assessor / External Reviewer for Panel Penilai Luar Kenaikan Pangkat Prof Madya - Dr. Mukhtar Malik, FTK, UC-TATI, Malaysia, March 2021
2021 External Examiner for External Examiner of Post-Graduate Viva Voice (MSc): Iqbal Taufiqurrahman, UTP, Malaysia, June 2021
2021 External Examiner for Pemeriksa Luar Program Pasca Siswazah Fakulti Kejuruteraan Pembuatan, FKP, UTeM, Malaysia, April 2021
2021 External Examiner for PhD viva voce - R. Thiraviam , Annamalai University, India, April 2021
2021 Supervisor for Mohamad Amirul Bin Mohammed Mozlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Mohamad Amirul Bin Mohammed Mozlan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhamad Alif Bin Mat Amin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhammad Alif Qayyum Bin Johari, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Wan Mohd Hamiz Mursyid Bin Wan Mohd Shuimy @ Suhaimi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2020 Examiner for Andy Liew Li Shen, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Danial Haziq Bin Abd Majid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Fakhri Yamin Bin Ramli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Grace Janie Anak Rogers, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Hishamuddin Bin Md Rashid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Fareed Hafizuddin Bin Md Fadil, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Izzuddin Bin Sohaimi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Nur Fadhliudin Bin Jamaluddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Ng Zhen Zhang, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Norhamizi Arief Bin Abdullah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Nurul Amira Binti Amiruddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Nurul Hani Afiqah Binti Mohd Said, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Samuel Moses A/L Moheneswaran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Sharifah Nur Binti Mazli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 External Assessor / External Reviewer for External Assessor of FRGS research grant evaluation for CREAM, Universiti Teknikal Melaka (UTeM): 16 March 2020. , CREAM, UTeM, Malaysia, March 2020
2020 External Examiner for External Examiner of Post-Graduate Viva Voice (PhD): Mohd Hanafi b. Muhammad Sidik, FKP, UMP, Malaysia, November 2020
2020 External Examiner for External Examiner of Post-Graduate Viva Voice (PhD): Norafifah bt Husin, Optimization PF PES Ultrafiltration Hollow Fiber Membrane Fouling Performances Using Particles Swarm Optimization, Faculty of Mechanical Engineering, UTM, FKM, UTM, Malaysia, November 2020
2020 Head of Path, UTHM, Malaysia, June 2020
2020 Referee for Lead Judge (Ketua Hakim) of The Invention & Innovation Awards 19th for Malaysia Technology Expo 2020 (MTE 2020): 20 Feb 2020, PWTC KL. , MTE 2020, PWTC KL, Malaysia, February 2020
2020 Supervisor for Muhamad Alif Bin Mat Amin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Alif Qayyum Bin Johari, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Hazim Bin Mohd Hanapiah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Najmuddin Najmi Bin Misran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Najmuddin Najmi Bin Misran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Nur Alif Bin Salleh, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Sharman A/L Visvanathan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Wan Mohd Hamiz Mursyid Bin Wan Mohd Shuimy @ Suhaimi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2019 for Chairman of PhD viva voce for Salih Meri Abdul Ridha , Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2019
2019 Assessor / Reviewer for Panel Committee Member of Profesorship Assessment (Panel Sepakaran) for Faculty of Civil Eng. & Environment UTHM, 01 June 2019 ? 31 May 2021. , Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2019
2019 Co-supervisor for Nasha Emieza Binti Ruhaizat, PhD, Universiti Tun Hussein Onn Malaysia, 2019
2019 Deputy Chairman for Panel Committee Member (Deputy Chairman 1) for Anugerah Inspirasi Cendiakawan (AIC) UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2019
2019 Examiner for Abdul Aziz Hafiz Bin Mohd Fadzil, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Ahmad Faisham Bin Yaacob, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Danial Haziq Bin Abd Majid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Devaroopan A/L Ravichandran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Grace Janie Anak Rogers, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Mifzal Nazhan Bin Mazlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Mohd Syamim Fikri Bin Mohd Omar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhammad Izzuddin Bin Sohaimi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nurul 'Izzani Binti Mohd Hafizul Ong, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nurul Amira Binti Amiruddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nurul Haziera Namiza Binti Hilmi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nuruljannah Binti Razali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Rozai Amirul Bin Zakariah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Sharifah Nur Binti Mazli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Sujay A/L R Balakrishnan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 External Assessor / External Reviewer for External Assessor of Associate Profesor promotion (DS-54) for Dr. Saiful Anwar Che Ghani, FKP, UMP, Malaysia, July 2019
2019 External Assessor / External Reviewer for External Assessor of Profesorship promotion (VK-7) for Assoc. Prof. Dr. Mohd Warikh Abd Rashid, FKP, UTeM, Malaysia, May 2019
2019 External Assessor / External Reviewer for External Assessor of Profesorship promotion (VK-7) for Assoc. Prof. Ir. Dr. Mohd Asyadi Azam Mohd Abid, FKP, UTeM, Malaysia, December 2019
2019 External Assessor / External Reviewer for External Evaluator for Yayasan Universiti Teknologi Petronas fundamental research grant project (YUTP-FRGS) project, UTP, Malaysia, August 2019
2019 External Examiner for External Examiner of Post-Graduate Viva Voice (PhD): Nithia Kumar Kasava, Development of an integrated lean and sustainable manufacturing framework, Faculty of Mechanical Engineering, UTM, FKM, UTM, Malaysia, January 2019
2019 Supervisor for Ahmad Faez Hafizy Bin Kamal Jaffry, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Esther Anak Clement, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Muhammad Hazim Bin Mohd Hanapiah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Nur Alif Bin Salleh, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Nurul Ezureen Binti Yusri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Nurul Ezureen Binti Yusri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Sharman A/L Visvanathan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2018 Examiner for Abdul Aziz Hafiz Bin Mohd Fadzil, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Ahmad Faisham Bin Yaacob, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Augustine Lee Yew Chuong, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Devaroopan A/L Ravichandran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohammad Amirul Nazif Bin Abdul Nasir, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohd Khairul Efni Bin Norman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohd Khairul Efni Bin Norman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Haziq Bin Zaihan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Haziq Bin Zaihan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Nurul 'Izzani Binti Mohd Hafizul Ong, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Nurul Ezeanee Binti Adam, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Rozai Amirul Bin Zakariah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Sujay A/L R Balakrishnan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Yoggaraj A/L T Rajendra, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Yoggaraj A/L T Rajendra, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Ahmad Faez Hafizy Bin Kamal Jaffry, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Asmira Farhana Binti Aminudden, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Esther Anak Clement, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Mohamad Syazwan Bin Salim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Mohamad Syazwan Bin Salim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Nur Elisa Binti Zainodin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2017 Examiner for Augustine Lee Yew Chuong, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Mohammad Amirul Nazif Bin Abdul Nasir, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Mohd Azizul Rahman Bin Mohd Yusoff, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Mohd Azizul Rahman Bin Mohd Yusoff, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Mohd Hisyam Bin Zakaria @ Kira, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Mohd Hisyam Bin Zakaria @ Kira, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhammad Amirul Syafiq Bin Marhaban, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nithiyarajah A/L Nadarajah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nithiyarajah A/L Nadarajah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nur Fadhilah Binti Mohd Ali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nurul Ezeanee Binti Adam, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Main Supervisor for Chan Boon Loong, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Main Supervisor for Mohammed Abdulridha Abbas, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Asmira Farhana Binti Aminudden, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Mohamad Farul Rafiq Bin Shamsuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Muhamad Safiuddin Bin Ishak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Muhamad Safiuddin Bin Ishak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Nur Elisa Binti Zainodin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Raja Mohd Fikri Bin Tengku Badli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2016 Examiner for Basyirah Binti Sazzali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Mohamad Faiz Bin Mohd Fauzi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Mohamed Haiyazudeen Bin Mohamed Ibrahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Muhammad Firdaus Bin Mazalan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Nur Anis Binti Mohamad Radzi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Nur'Ain Binti Rosli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Main Supervisor for Sami Abdo Mohammed Al-Alimi, PhD, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Mohamad Farul Rafiq Bin Shamsuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Muhammad Faiz Bin Abdul Aziz, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Muhammad Faiz Bin Abdul Aziz, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Raja Mohd Fikri Bin Tengku Badli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2015 Main Supervisor for Amir Detho, MSc, Universiti Tun Hussein Onn Malaysia, 2015
2015 Main Supervisor for Azlan Bin Ahmad, PhD, Universiti Tun Hussein Onn Malaysia, 2015
2014 Main Supervisor for Azlan Bin Ahmad, MSc, Universiti Tun Hussein Onn Malaysia, 2014
2014 Main Supervisor for Nor Ain Binti Jamil Hosni, PhD, Universiti Tun Hussein Onn Malaysia, 2014
2013 Main Supervisor for Nur Kamilah Binti Yusuf, PhD, Universiti Tun Hussein Onn Malaysia, 2013
2013 Main Supervisor for Siti Salwa Binti Khamis, MSc, Universiti Tun Hussein Onn Malaysia, 2013
2013 Main Supervisor for Syaiful Nizam Bin Ab Rahim, PhD, Universiti Tun Hussein Onn Malaysia, 2013
2012 Co-supervisor for Kamaruddin Bin Kamdani, PhD, Universiti Tun Hussein Onn Malaysia, 2012
2012 Main Supervisor for Chan Boon Loong, MSc, Universiti Tun Hussein Onn Malaysia, 2012
2012 Main Supervisor for Kamaruddin Bin Kamdani, PhD, Universiti Tun Hussein Onn Malaysia, 2012
2011 Main Supervisor for Muhammad Ridzuan Bin Idris, MSc, Universiti Tun Hussein Onn Malaysia, 2011
2011 Main Supervisor for Nor Ain Bt Jamil Hosni, MSc, Universiti Tun Hussein Onn Malaysia, 2011
2011 Main Supervisor for Nur Syahadah Binti Abdul Aziz, MSc, Universiti Tun Hussein Onn Malaysia, 2011
2011 Main Supervisor for Said Bin Ahmad, PhD, Universiti Tun Hussein Onn Malaysia, 2011
2010 Main Supervisor for Faizul Ezmat Bin Abdul Hamid, MSc, Universiti Tun Hussein Onn Malaysia, 2010
2010 Main Supervisor for Norazlan Bin Md Warap, MSc, Universiti Tun Hussein Onn Malaysia, 2010
2010 Main Supervisor for Nur Akmal Hakim Bin Jasni, MSc, Universiti Tun Hussein Onn Malaysia, 2010
2010 Main Supervisor for Nur Kamilah Binti Yusuf, MSc, Universiti Tun Hussein Onn Malaysia, 2010

YearDescriptionLevel
2022 Committee Member for Lifetime Fellow Member , ISDS, Japan, Jepun, April 2022 - August 2030 International
2022 Academic Editor / Editor for Editorial Board Member for Journal of Basic & Applied Sciences (JBAS), Set Publisher, Canada, June 2022 - July 2030 International
2021 Committee Member for 6th International Conference on Frontiers of Composite Materials (ICFCM2021), ICFCM 2021, University of Melbourne, Australia, November 2021 International
2021 Member for Product Development and Management Association (PDMA), PDMA, USA, United States Of America, June 2021 - June 2022 International
2021 Committee Member for Panel Committee Member of research grant monitoring report , Ministry of Higher Education (KPT), Malaysia, May - June 2021 National
2021 Assessor / Reviewer for Penilai Jawatan Kuasa Sepakaran Jawatan Profesor Fakulti, FKMP, UTHM, Malaysia, July 2021 - June 2022 University
2020 Committee Member for Technical Committee Evaluation Members for Malaysia Research and Development Classification System (MRDCS) 7th edition, MESTECC, previously MOSTI: 18 Aug 2020 ? present. , MESTECC @ MOSTI, Malaysia, August 2020 National
2019 External Examiner for External Examiner of Post-Graduate Viva Voice (PhD), FKM, UTM, Malaysia, December 2019 - March 2020 National
2019 Committee Member for Committee Member of Endowment Mgmt of Trustee UTHM, 26 Aug 2019 ? 25 Aug 2021 , Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2019 - August 2021 University
2016 Academic Editor / Editor for Editorial Board Member for The International Journal of Engineering Materials and Manufacture (IJEMM), Deer Hill Publications, ISSN (online): 0128-1852, Deer Hills Publication, Malaysia, January 2016 - August 2030 International

YearDescription
Organiser / Venue
Date
2022 TAKLIMAT SISTEM UTHM-FTKQMS E-FILE PNP 2022
UTHM / SECARA ATAS TALIAN
13/10/2022
2021 KURSUS OBS STUDIO
UTHM / SECARA ATAS TALIAN
07/07/2021
2021 MPRC INDUSTRY 2/2021:ENVIRONMENTAL IMPACT ASSESSMENT (EIA): CONCEPT AND PRACTICE
UTHM / Zoom
01/06/2021
2021 KURSUS ADOBE INDESIGN AND MANAGING PDF FILES
UTHM / Secara dalam talian: Zoom Meeting
12/04/2021
2021 BENGKEL SEMAKAN KEJITUAN DAN PIAWAIAN DATA MENGIKUT KEPERLUAN MALAYSIAN RESEARCH ASSESSMENT 2020
UTHM / RESEARCH LOUNGE, RMC
17/03/2021
2021 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI PENDIDIKAN TEKNIKAL DAN VOKASIONAL
UTHM / ZOOM
11/01/2021
2021 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI PENGURUSAN TEKNOLOGI DAN PERNIAGAAN
UTHM / GOOGLE MEET
07/01/2021
2021 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA PUSAT PENGAJIAN DIPLOMA
UTHM / GOOGLE MEET
06/01/2021
2020 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI SAINS GUNAAN & TEKNOLOGI
UTHM / -
30/12/2020
2020 BENGKEL PENYEDIAAN BUKU PLAN STRATEGIK UTHM 2021-2025 DAN SKTU 2021 UTHM BAGI KLUSTER 2 (PENYELIDIKAN INOVASI HUBUNGAN INDUSTRI DAN KOMUNITI)
UTHM / -
08/10/2020
2020 SESI LIBATSAMA BERSAMA MAJLIS PROFESOR UNIVERSITI
UTHM / -
20/09/2020
2020 LOOK PROFESIONAL WITH OBS STUDIO
UTHM / -
15/07/2020
2020 USING IPAD FOR TEACHING : SYNCHRONOUS AND ASYNCHRONOUS METHOD
UTHM / -
13/07/2020
2020 TAKLIMAT PELAKSANAAN INISIATIF WORK FROM HOME (WFH) MENGGUNAKAN APLIKASI WORKSPACE UTHM SIRI 7
UTHM / -
14/04/2020
2019 BENGKEL PERSEDIAAN PRA SASARAN KERJA TAHUNAN UNIVERSITI (SKTU) 2020 UTHM BAGI KLUSTER 2 (PENYELIDIKAN DAN INOVASI)
UTHM / UTHM
28/08/2019
2019 KURSUS KECERGASAN EKSEKUTIF
UTHM / PUMAS
31/07/2019 - 01/08/2019
2019 KURSUS MICROSOFT EXCEL UNTUK PNP
UTHM / UTHM
23/07/2019
2019 SEMINAR POTENSI DAN MASA DEPAN BULUH MALAYSIA
UTHM / UTHM
30/04/2019
2019 KURSUS PENGURUSAN KEWANGAN EKSEKUTIF DAN KELESTARIAN KEWANGAN
UTHM / BILIK LATIHAN SERI TERATAI
25/03/2019 - 26/03/2019
2019 BENGKEL PENYEDIAAN "BUSINESS REQUIREMENT KPI DASHBOARD" SIRI 1
UTHM / UTHM
13/03/2019 - 14/03/2019

ID IPTITTLE PRODUCTTYPE OF IP NO. APPLICATIONROLE
CP752 Organizational Research Knowledge Experts Dashboard (ORKED) Fasa 2 Hak Cipta (Copyright) LY2021J05501 PEREKA CIPTA/PENYELIDIK BERSAMA
UI17 A Direct Chip Recycling Process By Hot Equal Channel Angular Pressing Utility Innovation UI2019006960 PEREKA CIPTA/PENYELIDIK BERSAMA
CP342 Functional Products by Hot Equal Channel Angular Pressing (ECAP) of Solid-State Recycling Hak Cipta (Copyright) LY2019002129 PEREKA CIPTA/PENYELIDIK BERSAMA
PT164 A Method and Apparatus for Sustainable Direct Metal Recycling Through Hot Extrusion Paten (Patent) PI2017300020 PEMILIK/PENYELIDIK UTAMA
CP138 Direct Recycling of Aluminium Chip (AA6061) Employing Hot Extrusion Process-Mechanical Elongation to Failure Hak Cipta (Copyright) LY2017003639 PEMILIK/PENYELIDIK UTAMA
CP139 Direct Recycling of Aluminium Chip(AA6061) Employing Hot Extrusion Process-Mechanical Ultimate Tensile Stregth Hak Cipta (Copyright) LY2017003640 PEMILIK/PENYELIDIK UTAMA
CP140 Direct Recycling of Aluminium Chip(AA6061) Employing Hot Extrusion Process-Simulation Using Deform 3D Stress-Strain Hak Cipta (Copyright) LY2017003641 PEMILIK/PENYELIDIK UTAMA
CP137 Direct Recycling of Aluminium Chip (AA6061) Employing Hot Extrusion Machine Hak Cipta (Copyright) LY2017003638 PEMILIK/PENYELIDIK UTAMA
PT155 A Method and Apparatus for Sustainable Direct Metal Recycling Through Hot Press Forging Paten (Patent) PI2017300013 PEMILIK/PENYELIDIK UTAMA
PT156 A Method and an Apparatus for Circulating Dielectric of Powder Mixed Electrical Disharge Machining (PMEDM) of Difficult-to-Cut Materials Paten (Patent) PI2017300012 PEMILIK/PENYELIDIK UTAMA
CP70 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Life Cycle Impact Assessment Hak Cipta (Copyright) LY2017001806 PEMILIK/PENYELIDIK UTAMA
CP71 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Quadratic Model of Elongation to Failure Hak Cipta (Copyright) LY2017001810 PEMILIK/PENYELIDIK UTAMA
CP73 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Heat Treated Recycled Specimen of Aluminium AA6061 After Hot Press Forging Process Hak Cipta (Copyright) LY2017001812 PEMILIK/PENYELIDIK UTAMA
CP72 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Quadratic Model of Ultimate Tensile Strength Hak Cipta (Copyright) LY2017001813 PEMILIK/PENYELIDIK UTAMA
CP67 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Quadratic Model of Global Warming Potential Hak Cipta (Copyright) LY2017001802 PEMILIK/PENYELIDIK UTAMA
CP78 Direct Recycling of Reinforced Aluminium Chip (AA6061) Employing Hot Press Forging ? Quadratic Model for Elongation to Failure Hak Cipta (Copyright) LY2017001808 PEMILIK/PENYELIDIK UTAMA
CP77 Direct Recycling of Reinforced Aluminium Chip (AA6061) Employing Hot Press Forging ? Desirability and Confirmation Hak Cipta (Copyright) LY2017001807 PEMILIK/PENYELIDIK UTAMA
CP79 Direct Recycling of Reinforced Aluminium Chip (AA6061) Employing Hot Press Forging ? Reinforced Constituent Amount Hak Cipta (Copyright) LY2017001809 PEMILIK/PENYELIDIK UTAMA
CP80 Direct Recycling of Reinforced Aluminium Chip (AA6061) Employing Hot Press Forging ? Quadratic Model for Ultimate tensile strength Hak Cipta (Copyright) LY2017001811 PEMILIK/PENYELIDIK UTAMA
CP74 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Recycled Specimen of Aluminium AA6061 After Hot Press Forging Process (Surface Integrity) Hak Cipta (Copyright) LY2017001814 PEMILIK/PENYELIDIK UTAMA
CP75 1. Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Recycled Specimen of Aluminium AA6061 After Hot Press Forging Process (Mechanical Properties) Hak Cipta (Copyright) LY2017001815 PEMILIK/PENYELIDIK UTAMA
CP81 Grain size evolution of Reinforced Recycled Aluminium Chip by Hot Press Forging Process Hak Cipta (Copyright) LY2017001816 PEMILIK/PENYELIDIK UTAMA
CP84 Microhardness of Reinforced Recycled Aluminium Chip by Hot Press Forging Process Hak Cipta (Copyright) LY2017001819 PEMILIK/PENYELIDIK UTAMA
CP85 Density of Reinforced Recycled Aluminium Chip by Hot Press Forging Process Hak Cipta (Copyright) LY2017001820 PEMILIK/PENYELIDIK UTAMA
CP86 Ultimate tensile strength of Reinforced Recycled Aluminium Chip by Hot Press Forging Process Hak Cipta (Copyright) LY2017001821 PEMILIK/PENYELIDIK UTAMA
CP83 Fracture Surface of Reinforced Recycled Aluminium Chip by Hot Press Forging Process Hak Cipta (Copyright) LY2017001818 PEMILIK/PENYELIDIK UTAMA
CP82 Elongation to failure of Reinforced Recycled Aluminium Chip by Hot Press Forging Process Hak Cipta (Copyright) LY2017001817 PEMILIK/PENYELIDIK UTAMA
CP76 Direct Recycling of Reinforced Aluminium Chip (AA6061) Employing Hot Press Forging ? Quadratic Model for Microhardness Hak Cipta (Copyright) LY2017001804 PEMILIK/PENYELIDIK UTAMA
CP68 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Modeling and Optimization Hak Cipta (Copyright) LY2017001803 PEMILIK/PENYELIDIK UTAMA
CP69 Direct Recycling of AA6061 Aluminium Employing Hot Press Forging Process - Life Cycle Assessment (Global Warming Potential) Hak Cipta (Copyright) LY2017001805 PEMILIK/PENYELIDIK UTAMA

TAHUN NAMA ANUGERAH / PENCAPAIAN PENGANUGERAH PERINGKAT
2020 ANUGERAH TAAT SETIAUTHMUNIVERSITI
2010 ANUGERAH PERKHIDMATAN CEMERLANGUTHMUNIVERSITI
2010 ANUGERAH JASA BAKTI UTHMUNIVERSITI
2005 ANUGERAH PERKHIDMATAN CEMERLANGKUiTTHOUNIVERSITI

07-4538311