Staff Profile

Full NameDr. NUR AZAM BIN BADARULZAMAN
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN PEMBUATAN
Email
Designation DS52 - PENSYARAH KANAN
  KETUA KUMPULAN FOKUS (FG)
NANO STRUCTURE AND SURFACE MODIFICATION (NANOSURF)
FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

Field of Expertise

Field Category (KPT) APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES
Field (KPT) Engineering Science and Technology
Field of Specialization (KPT) Engineering Science and Technology

Areas of Research Interest

1. Materials science and engineering

Innovation Field of Interest

1. Materials science and engineering

Academic Qualification

YearQualificationInstitution
2011 DOKTOR FALSAFAH SERAMIK UNIVERSITI SAINS MALAYSIA
1999 SARJANA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA
1996 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA

Professional Appointments

DS52 - Pensyarah Kanan

Management Experience

DateDescription
01/01/2021 - 31/12/2022 Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Nano Structure and Surface Modification (NanoSurf)
01/01/2020 - 30/06/2021 Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Nano Structure and Surface Modification (NanoSurf)
01/01/2019 - 31/12/2019 Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Nano Structure and Surface Modification (NanoSurf)
02/01/2012 - 31/12/2013 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)
01/01/2011 - 31/12/2012 Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Pembuatan Dan Bahan Termaju (AMMC)
01/07/2010 - 31/12/2010 Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Pembuatan Dan Bahan Termaju (AMMC)

Professional Societies

YearDescriptionRoleLevel
30/03/1997 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2020 Pemilihan Bahan Kejuruteraan [BDA20402], Sesi 2019/2020, Semester 2, UTHM, 2020 University
2020 Makmal Sains Bahan [BDA17201], Sesi 2019/2020 Semester 2, UTHM, 2020 University
2019 Materials Science Laboratory [BDA 17201], Sesi 2019/2020 Semester 1, UTHM, 2019 University
2019 Composites [MDB 10103], 2018/2019 Semester 2, UTHM, 2019 University
2019 Engneering Composites [CDC 10603], 2018/2019 Semester II, UTHM, 2019 University
2019 Engineering Lab 1 [BDA 17101], 2018/2019 Semester 2, UTHM, 2019 University
2019 Engineering Materials Selection [BDA 20402], 2018/2019 Semester 2, UTHM, 2019 University
2019 Engineering Materials Selection [BDA 20402], Sesi 2019/2020 Semester 1, UTHM, 2019 University
2018 Engineering Composites [CDC 10603], Sesi 2018/2019 Semester I, UTHM, 2018 University
2018 Engineering Materials Selection [BDA 20402], Sesi 2018/2019 Semester I, UTHM, 2018 University
2018 Engineering Composites [MDB 10103]. Sesi 2018/2019 Semester I, UTHM, 2018 University
2018 Engineering Laboratory I [BDA 17101]. Sesi 2018/2019 Semester I. UTHM, 2018 University
2017 Materials Science [BNJ 10602]. Session 2016/2017 Semester 2, Universiti Tun Hussein Onn Malaysia University
2017 Engineering Polymer and Ceramic [BDB 40603], Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia University
2017 Materials Science [BDA10803], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Engineering Materials Selection [BDA20402], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Sains Bahan [BNR10102], Sesi 2016/2017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Sains Bahan [BDA10803], Sesi 2016/2017 Semester 1, Universii Tun Hussein Onn Malaysia, 2016 University
2015 Advanced Metallurgy [MDB10604], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Material Science [BDA10803], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Material Science [BDA10803], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia University
2015 Advanced Metallurgy [MDB10604], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia University
2014 Material Science [BDA10803], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014. University
2013 Engineering Polymer And Ceramic [BDB4063], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia University
2013 Engineering Materials Selection [BDA20402], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Engineering Polymer And Ceramic [BDB40603], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Materials Science [BDA1032], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Engineering Materials Selection [BDA20402], Sesi 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Polymer And Ceramic Engineering [BDB40603], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Engineering Materials Selection [BDA20402], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Polymer And Ceramic Engineering [BDB4063], Sesi 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2011 Engineering Materials Selection [BDA20402], Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Engineering Materials Selection [BDA20402], Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2010 Materials Science [DDA2503], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Engineering Materials Selection [BDA20402], Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Engineering Materials Selection [BDA20402], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2009 Materials Science [BDA1602], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2005 Engineering Materials Selection [BKM3163] Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2005 University
2005 Engineering Materials Selection [BKM5023], Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2005 University
2004 Materials Science [BKF1233] Sesi 20032004 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2004 University
2003 Engineering Materials Selection [BMB3013] Sesi 20032004 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2003 University
2003 Materials Testing [BKM4013], Sesi 20032004 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2003 University
2003 Materials Testing [BMB4043] Sesi 20022003 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2003 University
2002 Mechanical Metallurgy [BMB4033], Sesi 20022003 Semester 1, Kolej Uniiversiti Teknologi Tun Hussein Onn, 2002 University
2000 Materials Science [BMM1023], Sesi 20002001, Semester 1, Institut Teknologi Tun Hussein Onn, 2000 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
K067 Effect of rice husk silica as reinforcement on physical and mechanical properties of recycled aluminium chip AA7075 Ahli 31/03/2022
H513 Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Green technology in chemical processing of bamboo fibre for textile application Ahli 31/12/2021
H514 Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Extraction and crushing process of bamboo culm for bamboo fibre production Ahli 30/06/2021
H129 Evaluation of wear and corrosion mechanism of nickel based electrodeposited coating with different carbide type, carbide concentration and current density Ahli 31/03/2021
1596 A New Approach of Recycling Aluminium Alloy Chip (AA6061) Integrated With Particulate Silicon Carbide as an Alternative Metal Matrix Composite Material Ahli 31/07/2019
1545 Effect of nanofluids thermal properties on hydrodynamics and heat transfer performance for multiple impingement jet Ahli 30/04/2019
U543 Production of Cu-Sn-Zn Ternary Alloy via Electroplating Ahli 30/09/2018
U303 Preparation, Processing and Characterisation of Polypropylene/Kaolin Nanocomposites Ahli 31/10/2017
U293 Measurement and Analysis of Thermal Conductivity of Selected Nigerian Clays as Insulating Materials Ketua 31/07/2017
1212 New Approach of In Vitro Bioactivities of Bioactive Surface Layers on Anodised Titanium Ahli 31/12/2016
A022 High Performance Polymeric Materials Ahli 29/02/2016
1214 The Study of Physico-Mechanical Properties of Ceramic Ware From Recycling of Waste Porcelain and Cullet Admixture Ahli 30/09/2015
R018 A Multi-Nanolayer of Nickel/Copper Coating via electrodeposition Process Ahli 15/06/2015
U053 Synthesis And Characterization Of Polysiloxane Compound As A Precursor For Producing Silion Oxide Ahli 30/04/2015
1029 Effects of Rice Husk Ash (RHA) and Palm Oil Fuel Ash (POFA) addition on the Properties of Porcelain Body Ahli 30/03/2015
A034 Bus Black Box With OBD Board- Bus Fleet And Safety Management Ahli 31/12/2014
C016 Tajuk Program : Sustainable Integrated Direct Recycling Of Aluminium Industrial Waste Tajuk Projek : Hot Press Forging And Hot Extrusion For Direct Recycling Chip Aluminium Ahli 31/12/2014
1374 Recycled Glass As A Raw Material To Form Ion Releasing Vitreous Ceramic Ketua 31/10/2014
U054 Deposition Of Copper/Nickel Coating On Copper Substrate Ahli 31/10/2014
1126 Preparation And Characterisation Of Porous Paperclay Ceramic Body For The Porpose Of Membrane Support Ketua 31/08/2014
1247 Influence of Tin (Stanum) On Microstructure and Mechanical Behaviour of Direct Recycled Aluminum Alloy Ketua 31/08/2014
1080 Alat Pemotong Buah Kelapa Sawit : Teknologi Novel Untuk Meningkatkan Hasil Penuaian Ahli 31/07/2014
0745 Synthesis and Characterisation Studies on Surface Modification of Multilayer and Hybrid Porous Membrane Via Different Fabrication Methods Ketua 31/05/2013
0746 Consolidation of Ceramic Porous Membrane Via Different Fabrication Methods Ahli 31/05/2013
0006 Gelcasting of ceramic materials Ketua 29/02/2004

Publications

Book Chapters
Nazia Bano, Suzi Salwah Jikan, Hatijah Basri, Sharifah Adzila, Nur Azam Badarulzaman, Nurun Najwa Ruslan, Shakila Abdullah, Syazwan Hanani Meriam Suhaimy
(2020) Classifications And Applications Of Biocomposite Materials In Various Biomedical Fields, Composites In Biomedical Applications, CRC PRESS , 99, ISBN:9780367369620
ZM Yunus
(2020) Fabrication And Properties Of Polylactic Acid/Hydroxyapatite Biocomposites For Human Bone Substitute Materials, Composites In Biomedical Applications, CRC Press , 207, ISBN:9780429327766
Nurul Farahin Mohd Joharudin, Noradila Abdul Latif, Mohammad Sukri Mustapa, Nur Azam Badarulzaman and Aiman Supawi
(2020) Mechanical Properties Of Aa7075 Aluminium Chip Reinforced Rice Husk Silica By Solid State Technique, Advances In Mechanical, Manufacturing And Aerospace Engineering: Series 1, UTHM , 74, ISBN:9789672916567
Nur Saadah Zainal, Zaleha Mohamad, Mohd Sukri Mustapa, Nur Azam Badarulzaman, Abdullah Zulfairis Zulkifli
(2020) Studies On Silica Produced From Original And Firing Rice Husk, Advances In Material Sciences And Engineering, Springer, Singapore , 399, ISBN:9789811382963
zaleha, Mohd Sukri Mustapa, Nur Azam Badarulzaman, Abdullah Zulfairis Zulkifli
(2019) Lect.Notes Mechanical Engineering , Advances In Material Sciences And Engineering , Springer, Singapore , 399, ISBN:9789811382963
Hamidon Salleh, Mohammad Kamil Abdullah, Nur Azam Badarulzaman, Bukhari Manshoor, Wan Aizon W Ghopa, Amir Khalid
(2017) Effect Of Nanofluids Thermal Properties On Hydrodynamics And Heat Transfer Performance For Multiple Impingement Jet, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 3, UTHM , 99, ISBN:9789672110095
General Publications
Nur Azam Bin Badarulzaman
(2008) Engineering Materials Science (Bda 1032/Bda 1602), UTHM
Nur Azam Bin Badarulzaman
(2007) Engineering Materials Selection (Bda 2042/Dda 2082), UTHM
Journal
R Rosley, S S Jikan, N A Badaruzaman, M S Roslan, S N A Razak and F Esa
(2021) Effect Of Current Densities In Cu-Sn-Zn Electroplating Process On Carbon Substrate Using Less Hazardous Electrolyte, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP SCIENCE , 5, 012041, ISSN:17426596
Nurul Farahin Mohd Joharudin, Noradila Abdul Latif, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Muhammad Faisal Mahmod
(2020) Effect Of Burning Temperature On Rice Husk Silica As Reinforcement Of Recycled Aluminium Chip Aa7075, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, PENERBIT AKADEMIA BARU , 3, 125, ISSN:22897879
Rosley, R., Jikan, S. S., Badrulzaman, N. A., Razak, S. N. A., and Roslan, M. S.
(2020) Effect Of Different Complexing Agent On Surface Morphology And Microstructure Of Cu-Sn-Zn Coatings Electrodeposited From Less Hazardous Electrolyte, JOURNAL OF PHYSICS: CONFERENCE SERIES, INSTITUTE OF PHYSICS PUBLISHING , 4, 1, ISSN:17426596
Abubakar Kazeem, Amkpa Job Ajala, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali
(2020) Effect Of Imperfections On Conductivity And Hardness Of High-Zn X7xxx Cast Al-Alloys Produced From Recycled Beverage Can, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 2, 188, ISSN:2229838X
Nurul Farahin Mohd Joharudin, Noradila Abdul Latif, Mohammad Sukri Mustapa, Nur Azam Badarulzaman
(2020) Effects Of Untreated And Treated Rice Husk Ash (Rha) Addition On Physical Properties Of Recycled Aluminium Chip Aa7075, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 1, 132, ISSN:2229838X
Abubakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali
(2020) Optimization Of Wear And Hardness Of Al?Zn?Mg?Cu Alloy Fabricated From Recycled Beverage Can Using Response Surface Methodology, SN APPLIED SCIENCES, SPRINGER , 7, 1, ISSN:25233973
Abubakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Wan Ali
(2020) Relating Fractographic Analysis To Yield Strength Of Novel X7475 (Al?Zn?Mg?Cu) Alloys Produced By Recycling Aluminium Beverage Cans, MATERIALS LETTERS, ELSEVIER , 3, 127067, ISSN:0167577X
Nur Zaha Hassan, Mohamed Nasrul Mohamed Hatta, Nur Azam Badarulzaman, Nurul Farahin Mohd Joharudin, Raihan Nur Hanani
(2020) The Effect Of Carbon Whisker Loading On Carbon Foam On Physical And Mechanical Properties, TECHNOLOGY REPORT OF KANSAI UNIVERSITY, KANSAI UNIVERSITY , 9, 4593, ISSN:04532198
Abubakar Kazeem, Nur Azam Badarulzaman, Wan Fahmin Faiz Bin Wan Ali
(2019) Effect Of Isothermal Heat Treatment On Hardness Of X7475 Aluminium Alloys, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit Akademia Baru , 3, 233, ISSN:22897879
Mohd Fairuz Alias, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Idayu Nasir, Thariq Hameed Sultan & Noradila Abdul Latif
(2019) Effect Of Rice Husk Ash On Tensile Strength Of Polymer Composites Reinforced Kenaf Fiber, TEST ENGINEERING & MANAGEMENT, MATTINGLEY PUBLISHING CO. INC , 11, 672, ISSN:01934120
Nazia Bano, Suzi Salwah Jikan, Hatijah Basri, Sharifah Adzila Syed Abu Bakar, Nur Azam Badarulzaman
(2019) Physicomechanical Properties Of Nanobiocomposite Composed Of Polylactic Acid And Biogenic Nano Hydroxyapatite, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 283, ISSN:2229838X
Nur Saadah Zainal, Zaleha Mohamad, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Abdullah Zulfairis Zulkifli
(2019) The Ability Of Crystalline And Amorphous Silica From Rice Husk Ash To Perform Quality Hardness For Ceramic Water Filtration Membrane, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 9, 229, ISSN:2229838X
Zakiah Kamdi, Nur Azam Badarulzaman, Muhammad Adeeb Reezan Sukkeri, Muhammad Syafiq Hassan, Mohamed Nasrul Mohamed Hatta, Ainun Rahmahwati Ainuddin
(2018) Evaluation Of Corrosion And Wear Behaviour Of Nickel Tungsten Carbide Electro-Deposited With Different Tungsten Carbide Concentration And Current Density, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 8, 38, ISSN:22298460
Shehu Usman Yahaya, Suzi Salwah Binti Jikan, Nur Azam Badarulzaman, Ajiya Dahiru Adamu
(2018) Structural And Morphological Studies Of Polypropylene/Kaolin Nanocomposite , ADVANCED SCIENCE LETTERS, American Scientific Publishers , 6, 4438, ISSN:19366612
Nur Saadah Zainal, Zaleha Mohamad, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Zainathul Akhmar Salim Abdul Salim, and Mohd Idrus Masirin
(2018) Study Of Characteristics Of Rice Husk And Silica Obtained From Rice Husk, INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING AND APPLICATIONS, IACSIT Press , 10, 158, ISSN:20100221
Amkpa Job Ajala, Nur Azam Badarulzaman
(2018) Study Of Physio-Mechanical Properties Of Refractory Fireclay For Production Of Furnace Lining, ADVANCED SCIENCE LETTERS , American Scientific Publishers , 6, 3940, ISSN:19366612
Job AjalaAMKPA and NurAzam BADARULZAMAN
(2018) Thermal Assessment Of Kpata Fireclay For Refractory Applications, , INTERNATIONAL JOURNAL OF CURRENT RESEARCH IN SCIENCE, ENGINEERING & TECHNOLOGY (IJCRSET), Unique Research Publishers , 3, 179, ISSN:25814311
Suzi Salwah Jikan, Nur Azam Badarulzaman, Shehu Yahaya, Ajiya Dahiru Adamu
(2017) Delamination Of Kaolinite By Intercalation Of Urea Using Milling, MATERIALS SCIENCE FORUM, Trans Tech Publication , 3, 136, ISSN:16629752
Ajiya Dahiru Adamu, Suzi Salwah Jikan, Balkis Haji A. Talip, Nur Azam Badarulzaman, Shehu Yahaya
(2017) Effect Of Glycerol On The Properties Of Tapioca Starch Film, MATERIALS SCIENCE FORUM, Trans Tech Publication , 3, 239, ISSN:16629752
Awwal Hussain Nuhu, Suzi Salwah Jikan , Saliza Asman , Nur Azam Badarulzaman , Dagaci Muhammad Zago, and Nazia Bano
(2017) Fabrication And Characterization Of Direct Recycled Al-Cu-Cullet Metal Composite, JOURNAL OF SCIENCE AND TECHNOLOGY (UTHM), UTHM , 12, 15, ISSN:22298460
Amkpa Job Ajala, Nur Azam Badarulzaman, Abu Bakar Aramjat
(2017) Impact Of Sintering Temperatures On Microstructure, Porosity And Mechanical Strength Of Refractory Brick, MATERIALS SCIENCE FORUM, Trans Tech Publication , 3, 66, ISSN:16629752
Rozainita Rosley, Suzi Salwah Jikan, Nur Azam Badarulzaman
(2017) Production Of Cu-Sn-Zn Ternary Alloy Coating Via Electroplating, MATERIALS SCIENCE FORUM, Trans Tech Publication , 3, 400, ISSN:16629752
Amkpa Job Ajala, Nur Azam Badarulzaman
(2016) Performance Assessment Of Physico-Mechanical Properties Of Aloji Fireclay Brick, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 13, ISSN:2229838X
Rozainita Rosley, Suzi Salwah Jikan and Nur Azam Badaruzaman
(2016) Production Of Cu Sn Zn Ternary Alloy Via Electroplating, INTERNATIONAL CONFERENCE ON X-RAY & RELATED TECHNIQUES IN RESEARCH AND INDUSTRY, APP MALAYSIA MINS , 12, 19, ISSN:0935-9648
Suzi Salwah Jikan, Shehu Isah Danlami, Nur Azam Badarulzaman
(2016) Synthesis Of Polymethylvinylsiloxane From Several Silicon Compounds Followed By Ftir And Nmr Techniques, MATERIALS SCIENCE FORUM, Trans Tech Publication , 1, 369, ISSN:16629752
Nurul Fariha Yusof, Ku Halim Ku Bulat, Nur Azam Badarulzaman, Mohd Al Amin Muhamad Nor
(2016) The Effect Of Boron Oxide On Phosphate Ion Released From Borosilicate Glass In Seawater, MATERIALS SCIENCE FORUM, Trans Tech Publication , 1, 24, ISSN:16629752
Amkpa Job Ajala, Nur Azam Badarulzaman
(2016) Thermal Conductivity Of Aloji Fireclay As Refractory Material, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 16, ISSN:2229838X
Suzi Salwah Jikan, Sharifah Sakinah Abdullah, Nur Azam Badarulzaman, Zakiah Kamdi and Azzura Ismail
(2015) Corrosion Behaviour And Morphological Analysis Of Ni/Cu Nanolayer Coating In Salt Solution, APPLIED MATHEMATICS AND COMPUTATIONAL INTELLIGENCE (AMCI) , Universiti Malaysia Perlis (UniMAP) , 1, 355, ISSN:22891323
N.A. Badarulzaman
(2015) Effect Of Plaster Of Paris Waste And Sintering Temperatures On Physical Properties Of Pottery, PROCEDIA CIRP, Elsevier , 3, 752, ISSN:22128271
NA Badrulzaman, MAM Amiroll, MZ Noh, SS Jikan, ZM Yunus
(2013) Effect Of Mica Content On The Physical, Mechanical And Morphological Properties Of Alumina-Cullet-Mica Ceramics., APPLIED MECHANICS AND MATERIALS, Trans-Tech , 4, 919, ISSN:1662-7482
Prosiding / Seminar
Nurul Farahin Mohd Joharudin, Noradila Abdul Latif, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Muhammad Faisal Mahmod
(2020) Physical Properties And Hardness Of Treated Amorphous Silica As Reinforcement Of Aa7075 Recycled Aluminum Chip , IOP PUBLISHING , 1, ISBN:17578981
Muhammad Faiz Ashri, Nik Akmal Rejab, Zainal Arifin Ahmad, Norazharuddin Shah Abdullah, Nur Azam Badarulzaman, Raja Azlan Amirul Raja Mat, Wan Fahmin Faiz Wan Ali
(2019) Densification And Grain Growth Of Microwave-Sintered Yttrium Iron Garnet, AIP PUBLISHING LLC , 020107-1, ISBN:9780735417960
Awwal Hussain Nuhu, Suzi Salwah Jikan, Saliza Asman, Nur Azam Badarulzaman, Dagaci Muhammad Zago1, Abdullahi Tijjani
(2019) Effects Of Holding Time On The Properties Of Direct Recycled Aluminum-Copper-Cullet Metal Composites, AIP PUBLISHING LLC , 020099-1, ISBN:9780735417960
Dagaci Muhammad Zago, Suzi Salwah Jikan, Nur Azam Badarulzaman, Awwal Hussain Nuhu, Nazia Bano
(2019) Investigation On Structural, Mechanical And Melt Flow Properties Of In Situ Polypropylene/Kaolin Nanocomposite, AIP PUBLISHING LLC , 020104-1, ISBN:9780735417960
Amkpa Job Ajala, Kazeem Abubakar, Ismail Mat Arshat, Nur Azam Badarulzaman
(2019) Preliminary Investigation On Nigerian Quan?Pan Clay For Refractory Application, AIP PUBLISHING LLC , 020095-1, ISBN:9780735417960
ROZAINITA ROSLEY, SUZI SALWAH JIKAN, NUR AZAM BADARUZAMAN, MISBAHUL MUNEER ABD RAHMAN, and HAZEL MONICA MATIAS-PERALTA
(2017) Effect Of Ph In Production Of Cu Sn Zn Via Electroplating With Less Hazardous Electrolyte, XAPP MALAYSIA - MALAYSIA NUCLEAR SOCIETY , 205, ISBN:-
Rozainita Rosley, Suzi Salwah Jikan, Nur Azam Badarulzaman
(2016) Production Of Cu Sn Zn Ternary Alloy Via Electroplating , Trans Tech Publications Inc. , 400, ISBN:-
Suzi Salwah Jikan, Shehu Isah Danlami, Nur Azam Badarulzaman
(2015) Synthesis Of Polymethylvunylslioxane From Several Silicon Compounds Followed By Ftir And Nmr Techniques, XAPP-MNS , 24 , ISBN:-
Nur Azam Bin Badarulzaman
(2012) Effect Of Mica Content On The Physical, Mechanical And Morphological Properties Of Alumina-Cullet-Mica Ceramic, UTHM
Nur Azam Bin Badarulzaman
(2012) Fabrication And Characterization Of Kaolin-Based Ceramic Membrane For Liquid Filtration, Institut Teknologi Brunei
Nur Azam Bin Badarulzaman
(2012) Melt Flow And Mechanical Properties Of Polypropylene/Recycled Plaster Of Paris, UTHM
Nur Azam Bin Badarulzaman
(2011) Comparison Of Mechanical Properties Between Tapioca Starch And Corn Starch As Fillers In Ldpe, UTHM
Nur Azam Bin Badarulzaman
(2010) Shell Mould Reinforced With Rice Husk, MYDEGS
Nur Azam Bin Badarulzaman
(2009) Reinforcement Of Tcp Bioceramic By Addition Of Al2o3, Universiti Sains Malaysia
Nur Azam Bin Badarulzaman
(2008) Fabrication Of A 'Waterfall Concept' Glazing Equipment
Nur Azam Bin Badarulzaman
(2007) Co-Deposition Of Nickel-Alumina Composite Coating
Nur Azam Bin Badarulzaman
(2007) Design Of A Lab-Scale Glazing Equipment
Nur Azam Bin Badarulzaman
(2006) Electrodeposition Of Cusnzn/Sio2 Composite Coating

Supervision

YearDescriptionRole
2019 Pre-viva Examiner for PhD Thesis: Mohammed Hussein Rady (2019): Fatigue Life and Mechanical Properties of Aluminium Alloy AA6061 Chips Prepared by Solid-State Recycling using Hot Extrusion Process Examiner
2017 Supervisor for Amkpa Job Ajala, PhD, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2017 Co-Supervisor for Sharifah Sakinah binti Abdullah, Master, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2016 Supervisor for Abdullah bin Mat Nawi, Master, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2013 Assessor for Book Manuscript, Buku Panduan Seni Tembikar: Panduan Berkenaan Kelengkapan Dan Cara-Cara Penghasilan Produk Tembikar, Penerbit USM, 2013 Assessor
2013 Examiner for Thesis: Nor Ain bt Jamil Hosni (2013): Wear Behaviour of Advanced Multilayer Coating PVD-TiAlN in Dry Machining of AISI D2 Hardened Steel Examiner
2013 Referee Pertandingan Rekacipta, NFEED 2013, Oktober 2013 Referee
2012 Supervisor for Yusri bin Hj Sitan, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Mohamad Hazri bin Ismail, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nur Afizawati binti Ibrahim, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Mohammad Affiq bin Kamaruzzaman, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Co-Supervisor for Nur Farhani Ismail, M.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Amir Fadzli bin Sahaik Muhamad, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nur Mardiana binti Marzuki, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2011 Supervisor for Nor Azma Ismail (CD080120), B.Eng, Unibersiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Nor Adila binti Shafie (CD080176), B.Eng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Nor Syafira binti Zulfaqar (CD080046), B.Eng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Mohd Adam Mohd Sidek, B.Eng, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Nurshuhada binti Baharudin, B.Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2010 Supervisor for Faizul Ezmat bin Abdul Hamid, B.Eng, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2005 Supervisor for Nor Hazalin binti Abd Wahid, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2005 Supervisor
2004 Supervisor for Ishak bin Hasan, B.Eng, Universiti Tun Hussein Onn Malaysia, 2004 Supervisor
2003 Supervisor for Normi bin Muhamad, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Rozeah binti Ramlee, B.Eng, Kolej Universiti Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Siti Salwa binti Samsuri, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Suraya binti Abdul Rahmad, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Saifa Masfuza binti Salan, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Co-supervisor for Tamil Moli Loganathan, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Teo Hiu Hong, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Nor Hamidah binti Yatim, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Awg. Mohd. Rezal bin Abd. Razak, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Azraai bin Hj Md Hashim @ Hassan, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Azrul Affandi bin Eliah, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Che Faridah binti Che Mohamad, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Rosemaria Ibrahim, B.Eng., Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Marliyana binti Ya?acob, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Mohd Aswadi bin Muhamad, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2003 Supervisor for Mohd Izdihar bin Mohd Miyan, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2003 Supervisor
2002 Supervisor for Noor Azammi bin Abdul Murat, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2002 Supervisor
2002 Supervisor for Muhammad Azam bin Suliman @ Abd. Wahab, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2002 Supervisor
2002 Supervisor for Mohd Shahril bin Mohd Hassan @ Abd Ghani, B.Eng, 2002 Supervisor
2002 Supervisor for Fun Mun Hin, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2002 Supervisor
2002 Supervisor for Zulkarnain bin Jamak, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2002 Supervisor
2002 Supervisor for Jee Tze Chin, B.Eng, Kolej Universiti Teknologi Tun Hussein Onn, 2002 Supervisor
2001 Supervisor for Ng In Seng, B.Eng, Institut Teknologi Tun Hussein Onn Malaysia, 2001 Supervisor
2001 Supervisor for Mastura binti Ibrahim, B.Eng, Institut Teknologi Tun Hussein Onn, 2001 Supervisor

Extension & Public Services

YearDescriptionLevel
2010 Annual Donator for World Wildlife Fund (WWF) Malaysia, 2010 - present National

Courses & Training

YearDescription
Organiser / Venue		Date
2020 PROGRAM KHIDMAT MASYARAKAT YANG BERIMPAK SECARA ATAS TALIAN
UTHM / GOOGLE MEET 		01/10/2020
2019 BENGKEL OBE BERSAMA PENYELARAS
UTHM / UTHM 		11/02/2019
2019 OPEN LECTURE - CULTIVATING EFFECTIVE RESEARCH CULTURE : LESSON FROM JAPAN
UTHM / DEWAN 3 DTMI 		03/01/2019

« Back