PROF. MADYA Ts. Dr. AZRIN HANI BINTI ABDUL RASHID
DS14 PROFESOR MADYA
Jabatan Teknologi Kejuruteraan Mekanikal
Fakulti Teknologi Kejuruteraan
FELO INSTITUT
Fakulti Teknologi Kejuruteraan
AHLI
Fakulti Teknologi Kejuruteraan
PENYELIDIK UTAMA
Fakulti Teknologi Kejuruteraan
PENGARAH
Pejabat Pengurusan Makmal
CONTACT DETAILS
07- 950 8541
PROFESSIONAL APPOINTMENTS
DS14 Profesor Madya
ACADEMIC QUALIFICATION
| DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL (IMPAK) , UNIVERSITI SAINS MALAYSIA (2015) |
| SARJANA KEJURUTERAAN MEKANIKAL & SISTEM PEMBUATAN , COVENTRY UNIVERSITY (2008) |
| SARJANA MUDA KEJURUTERAAN MEKANIKAL , KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN (2003) |
| SC/MCE/SPM/SPVM , SEK MEN CONVENT TAIPING (1998) |
FIELD OF EXPERTISE
| Category | Expertise |
|---|---|
| Field Category (KPT) : | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
| Field (KPT) : | Other Applied Sciences, Engineering and Technologies n.e.c. |
| Field of Specialization (KPT) : | Composite Materials |
AREAS OF RESEARCH INTEREST
Textile Composites
Impact Response Analysis
Lean Manufacturing
INNOVATION FIELD OF INTEREST
Armour Panel
Composites for Technical Applications
MANAGEMENT EXPERIENCE
| Date | Description |
|---|---|
| 16/05/2025 - 30/06/2027 | Pengarah
Pejabat Pengurusan Makmal |
| 01/02/2025 - 31/12/2026 | Ahli
Fakulti Teknologi Kejuruteraan, Bamboo Research Centre (BambooRC) |
| 01/01/2025 - 31/12/2026 | Penyelidik Utama
Fakulti Teknologi Kejuruteraan, Bamboo Research Centre (BambooRC) |
| 01/11/2024 - 31/10/2026 | Felo Institut
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
| 01/01/2025 - 15/05/2025 | Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Teknologi Kejuruteraan |
| 01/01/2023 - 31/12/2024 | Penyelidik Utama
Fakulti Teknologi Kejuruteraan, Bamboo Research Centre (BambooRC) |
| 01/08/2022 - 31/12/2024 | Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Teknologi Kejuruteraan |
| 09/07/2023 - 22/07/2023 | Menjalankan Tugas (Dekan)
Fakulti Teknologi Kejuruteraan |
| 01/01/2021 - 31/12/2022 | Penyelidik Utama
Fakulti Teknologi Kejuruteraan, Bamboo Research Centre (BambooRC) |
| 01/05/2021 - 31/07/2022 | Ketua Jabatan
Fakulti Teknologi Kejuruteraan, Jabatan Siswazah |
| 01/09/2016 - 31/08/2021 | Ketua Kumpulan Fokus (FG)
Fakulti Teknologi Kejuruteraan, Manufacturing Process, System and Materials |
| 16/04/2019 - 30/04/2021 | Ketua Jabatan
Fakulti Teknologi Kejuruteraan, Jabatan Siswazah |
| 01/01/2018 - 15/04/2019 | Ketua Pusat
Fakulti Teknologi Kejuruteraan, Pusat Teknologi Lanjutan (ATC) |
| 01/10/2016 - 30/09/2018 | Ketua Makmal
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
| 18/07/2018 - 02/08/2018 | Menjalankan Tugas (Timbalan Dekan)
Fakulti Teknologi Kejuruteraan |
| 01/09/2015 - 01/09/2017 | Ketua Program
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
PROFESSIONAL SOCIETIES
| Year | Description | Role | Level |
|---|---|---|---|
| 2018 - 9999 | Malaysia Board of Technologists (MBOT) | Teknologis Berijazah | Kebangsaan |
| 2018 - 2019 | Malaysia Board of Technologists (MBOT) | Teknologis Profesional | Kebangsaan |
TEACHING EXPERIENCE
| Year | Description | Level |
|---|---|---|
| 2026 | Creativity And Innovation [BNJ10302], Session 20252026 Semester 2, Universiti Tun Hussein Onn Malaysia, 2026 | University |
| 2026 | Material Science [BNJ11603], Session 20262027 Semester 1, Universiti Tun Hussein Onn Malaysia, 2026 | University |
| 2026 | Research Methodology [KNT10003], Session 20262027 Semester 1, Universiti Tun Hussein Onn Malaysia, 2026 | University |
| 2025 | Academic Program Advisor for AHLI JAWATANKUASA PENGAJIAN PROGRAM AKADEMIK DOKTOR FALSAFAH DI FTKM, UTeM, UNIVERSITI TEKNIKAL MALAYSIA MELAKA, Malaysia, July 2025 | National |
| 2025 | Course Coordinator for PELANTIKAN SEBAGAI KETUA PEMURNIAN 7 KURSUS KURIKULUM, IJAZAH SARJANA MUDA TEKNOLOGI KEJURUTERAAN MEKANIKAL (PEMBUATAN) DENGAN KEPUJIAN (BNM) FAKULTI TEKNOLOGI KEJURUTERAAN, UNIVERSITI TUN HUSSEIN ONN MALAYSIA , Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, December 2025 | University |
| 2025 | External Assessor / External Reviewer for PANEL PENILAI, PENILAIAN AUDIT PEMATUHAN PROGRAM AKADEMIK UiTM SHAH ALAM (, UiTM SHAH ALAM, Malaysia, January 2025 | National |
| 2025 | Management And Professional Ethics [BNT30503], Session 20242025 Semester 2, Universiti Tun Hussein Onn Malaysia, 2025 | University |
| 2025 | Material Science [BNJ11603], Session 20252026 Semester 1, Universiti Tun Hussein Onn Malaysia, 2025 | University |
| 2025 | Member for MESYUARAT BERSAMA STAKEHOLDER PROGRAM BNM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2025 | University |
| 2025 | Research Methodology [KNT10003], Session 20242025 Semester 2, Universiti Tun Hussein Onn Malaysia, 2025 | University |
| 2025 | Research Methodology [KNT10003], Session 20252026 Semester 1, Universiti Tun Hussein Onn Malaysia, 2025 | University |
| 2025 | Research Methodology [PNT10003], Session 20242025 Semester 2, Universiti Tun Hussein Onn Malaysia, 2025 | University |
| 2024 | Creativity And Innovation [BNJ10302], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Creativity And Innovation [BNJ10302], Session 20242025 Semester 1, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Engineering Laboratory I [BNJ27101], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Engineering Technologist And Society [BNJ30202], Session 20242025 Semester 1, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Head for Ketua penyelaras pembelian peralatan PdP menggunakan baki penjimatan peruntukan bajet RMLT, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2024 | University |
| 2024 | Invited Lecturer for KURSUS SARJANA & DOKTOR FALSAFAH TEKNOLOGI KEJURUTERAAN SEM 1 SESI 2024/2025, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, October 2024 | University |
| 2024 | Patron for BENGKEL INTENSIF PENYELIAAN SISWAZAH, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2024 | University |
| 2024 | Research Methodology [KNT10003], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Research Methodology [KNT10003], Session 20242025 Semester 1, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Research Methodology [PNT10003], Session 20232024 Semester 2, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2024 | Research Methodology [PNT10003], Session 20242025 Semester 1, Universiti Tun Hussein Onn Malaysia, 2024 | University |
| 2023 | Creativity And Innovation [BNJ10302], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Creativity And Innovation [BNJ10302], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Engineering Laboratory I [BNJ27101], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Research Methodology [KNT10003], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Research Methodology [KNT10003], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Research Methodology [PNT10003], Session 20222023 Semester 2, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2023 | Research Methodology [PNT10003], Session 20232024 Semester 1, Universiti Tun Hussein Onn Malaysia, 2023 | University |
| 2022 | Creativity And Innovation [BNJ10302], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Creativity And Innovation [BNJ10302], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Research Methodology [KNT10003], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Research Methodology [KNT10003], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Research Methodology [PNT10003], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2022 | Research Methodology [PNT10003], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 | University |
| 2021 | Fabric And Apparel Manufacturing Technology [BNM32403], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Management And Professional Ethics [BNJ30702], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Management And Professional Ethics [BNJ30702], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Research Methodology [KNT10003], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Research Methodology [KNT10003], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Research Methodology [PNT10003], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2021 | Research Methodology [PNT10003], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 | University |
| 2020 | Nonwovens Technology [BNH40903], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | Nonwovens Technology [BNH40903], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | Research Methodology [KNT10003], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | Research Methodology [PNT10003], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2019 | Research Methodology [KNT10000], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Research Methodology [KNT10000], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Research Methodology [PNT10000], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Technicaltextile [BNH40503], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Waste Management [BNJ40103], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Yarn Production Technology [BNH20204], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2018 | Introduction To Lean Production [BNJ30602], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Introduction To Nonwoven Technology [BNH30503], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Research Methodology [KNT10000], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Research Methodology [PNT10000], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Textile Analysis And Evaluation [BNH30803], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Yarn Production Technology [BNH20203], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2017 | Advance Nonwovens Technology [BNH30703], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Introduction To Nonwoven Technology [BNH30503], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Textile Analysis And Evaluation [BNH30803], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Yarn Production Technology [BNH20203], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2016 | Introduction To Nonwoven Technology [BNH30503], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Knitting Production Technology I [BNH20303], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Textile Analysis And Evaluation [BNH30803], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Yarn Production Technology [BNH20203], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Apparel Technology [BNH40703], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Colour Measurement And Printing [BNH40603], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Machine Maintenance Ii [BNJ38102], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Mechanical Engineering Practice I [BNJ18001], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Textile Dyeing And Finishing [BNH30403], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Yarn Production Technology Ii [BNH30203], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2010 | Manufacturing Technology Practice 2 [DDD1023], Session 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Mechanical Engineering Practices Iii [BDA2801], Session 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Mechanical Engineering Practices Iv [BDA2811], Session 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Pneumatic And Hydraulic [DDD2063], Session 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2009 | Manufacturing Control Technology [BDD4083], Session 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
| 2009 | Mechanical Engineering Practices Iii [BDA2801], Session 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
| 2007 | Manufacturing Technology Practice 2 [DDD1023], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Manufacturing Techology Practices Iv [DDD2023], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Mechanical Engineering Practices Ii [BDA1811], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Mechanical Engineering Practices Iv [BDA2811], Session 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 | University |
RESEARCH GRANTS AND CONTRACTS
| Code | Title | Designation | End Date |
|---|---|---|---|
| Q847 | Pembangunan Kerangka Ilmu Dalam Memahami Fenomena Alam Hari Qiamat & Akhirat (Berdasarkan Al-Quran) Daripada Perspektif Astronomi & Astrofizik | Ahli | 15/09/2027 |
| A191 | Development of lemongrass essential oil microcapsule (LEOM) finishes on lightweight knitted fabric for mosquito repellent application | Ahli | 23/03/2027 |
| Q729 | Development of hybrid bamboo-rubberwood particleboard | Ahli | 31/12/2026 |
| A185 | Development and Improvement of the Prototype Non-Woven Seal Foam Duct Assy Air from Polyester-Textile Waste (POLYTEX) with Superhydrophobic Coating for HVAC Vehicle Applications | Ahli | 23/12/2026 |
| Q814 | Development of Pineapple Nonwoven Synthetic Leather for Apparel Applications | Ketua | 30/04/2026 |
| Q661 | Investigation of Textile Waste Blended Recycled Polyester using Needle-Punched Method for Nonwoven TW/RP Composite | Ahli | 30/11/2025 |
| Q677 | Exploring Fiber Compositions for Kenaf/Bamboo Nonwoven Mattress Fillers: A Study on Physical and Compression Properties | Ketua | 30/11/2025 |
| K454 | PROJEK PEMBANGUNAN PRODUK NONWOVEN GENTIAN BULUH BAGI APLIKASI BAHAN PERABOT DAN BAHAN BINAAN | Ahli | 31/12/2024 |
| W010 | Modernisation of curriculum of Textile Engineering and Textile Technology in Indonesia, Malaysia and Pakistan | Ahli | 14/07/2024 |
| Q228 | Microencapsulation of lemongrass essential oils for multi-functional finishing of cotton fabric | Ahli | 15/05/2024 |
| Q096 | Development of Kenaf Nonwoven for Mattress/Upholstery Products | Ahli | 01/05/2024 |
| M095 | Development of Kenaf Nonwoven for Mattress/Upholstery Products | Ketua | 31/03/2024 |
| H999 | Formulation of an Environmentally Friendly Laundry Detergent for Textile using the Active Ingredient Vikang99 | Ahli | 31/01/2024 |
| M096 | Kenaf Fiber as Newly Potential Mattress/Upholstery Products | Ketua | 30/12/2023 |
| M097 | Machine Process Optimisation and Electromechanical Maintenance of Production for Mattress/Upholstery Products | Ahli | 30/12/2023 |
| M098 | Improving Manufacturing Production of Mattress/Upholstery Products Using Lean Management Principles | Ahli | 30/12/2023 |
| H680 | FEASIBILITY STUDY ON THE EFFECTS OF HARVESTING AGE AND PLANTING DENSITY ON THE PHYSICAL AND MECHANICAL PROPERTIES OF BAMBOO FIBRES | Ahli | 31/08/2023 |
| H895 | Development of Malaysian Bamboo Bio-Plates | Ahli | 31/07/2023 |
| K036 | CRG - Development of woven steel wire mesh for front layers protection materials in flexible body armor | Ketua | 30/09/2022 |
| M033 | Establishment of bamboo fiber extraction production at Hangterrabamboo Sdn. Bhd. | Ahli | 31/08/2022 |
| H513 | Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Green technology in chemical processing of bamboo fibre for textile application | Ahli | 30/06/2022 |
| H723 | CHARACTERISTICS INVESTIGATION OF BAMBOO/POLYESTER BLEND YARN PRODUCED FROM SPINNING SYSTEM | Ketua | 30/04/2022 |
| W016 | Formulation of an Environmentally Friendly Laundry Detergent for Textile using the Active Ingredient Vikang99 | Ketua | 30/04/2022 |
| K084 | The influence of functional and comfort parameters on the design characteristics of pressure therapy gloves | Ahli | 31/03/2022 |
| K223 | The Influence of Yarn Surface Friction and Woven Architecture on the Design Characteristics of Kenaf/ Aluminium Fabric Reinforced Polymer for Energy Absorption | Ahli | 28/02/2022 |
| H512 | Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Textiles processing of bamboo fiber for yarns and nonwovens production | Ketua | 31/12/2021 |
| K252 | GERAN MTIB: CHEMICAL AND MORPHOLOGY PROPERTIES OF MALAYSIAN BAMBOO FOR TEXTILE FIBER PROCESSING | Ahli | 31/12/2021 |
| H593 | Fabrication of needle-punched bamboo nonwoven mat for thermal insulator application. | Ketua | 31/10/2021 |
| K083 | Investigation on the effects of textile structure of recycled PET bottle (R-PET) as newly developed composites for impact energy absorption. | Ketua | 30/09/2021 |
| H506 | Program : HYPERTHERMIA Projek : Synthesis and characterization of shape-memory polyurethanes coated fabrics for hyperthermia therapy | Ahli | 30/06/2021 |
| H514 | Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Extraction and crushing process of bamboo culm for bamboo fibre production | Ahli | 30/06/2021 |
| H064 | Investigation on the effects of textile structure of recycled PET bottle (R-PET) as newly developed composites for impact energy absorption. | Ketua | 30/06/2020 |
| H086 | Investigation on Coconut Coir Reinforcement for Cotton Planting Bag Mechanical Properties | Ahli | 30/06/2020 |
| H338 | Determination of Tensile Strength and Moisture Effect of Areca Leaf Sheath Subjected to Strain Deformation | Ahli | 30/06/2020 |
| H339 | Utilization of Natural Dyes as Antimicrobial properties for Green Technology Dyeing in Textile Applications | Ahli | 30/06/2020 |
| H340 | UTILIZATION THE PERFORMANCES OF MUNICIPAL SOLID WASTE MIXED POLYMER COMPOSITES (MSWPC) TO PRODUCE PARTITION WALL PANEL (PWP) INTO BUILDING MATERIALS | Ahli | 30/06/2020 |
| H464 | THE INFLUENCE OF COATING TECHNIQUES ON SUPERHYDROPHOBIC PROPERTIES OF FABRICS. | Ahli | 30/11/2019 |
| U666 | The Formulation And Synthesis Of Superhydrophobic Coating Based On Coconut Oil Reinforcing Natural Pigment For Self-Cleaning And Protective Nani-Coating | Ahli | 14/12/2018 |
| B075 | co-KEV Protective Panel : A High Impact Resistance Panel | Ketua | 13/07/2018 |
| U471 | The Impact of Injection Molding Processing Conditions and Fiber Content Toward the Properties of Polypropylene-Nanoclay Nanocomposites Blend with Gigantochloa Scortechinii Fibers | Ahli | 28/02/2017 |
| 0720 | A New Construction Material Based on Aggregation of Textiles (Used Cotton Clothing) and Limestone Powder Wastes | Ahli | 28/02/2012 |
| C002 | Kajian "Graduate Employability (GE) Graduan Universiti Tun Hussein Onn Malaysia (UTHM) | Ahli | 31/12/2010 |
| 0578 | Development of woven coir & its commercial applications | Ketua | 14/12/2010 |
PUBLICATIONS
| Book |
|---|
| Tuan Noor Hasanah Tuan Ismail, Azrin Hani Abdul Rashid, Mohd Nazrul Roslan, Nur Hanis Hayati Hairom, Faridah Hanim Mohd Noh, Tengku Nur Azila Raja Mamat, Suraya Hani Adnan (2019) Advanced Technology Centre: Research And Innovation, UTHM , 1, ISBN:9789672306504 |
| Tuan Noor Hasanah Tuan Ismail, Mohd Nazrul Roslan, Nur Hanis Hayati Hairom, Faridah Hanim Mohd Noh, Tengku Nur Azila Raja Mamat, Azrin Hani Abdul Rashid, Suraya Hani Adnan, (2019) Advanced Technology Centre: Research And Innovation Series 3 , UTHM , 1, ISBN:9789672306063 |
| Noraini Marsi, Nur Athirah Huzaisham, Nor Mazlana Main, Muhammad Farid Shaari and Azrin Hani ABdul Rashid (2019) Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 1, ISBN:9789672306740 |
| Azrin Hani Binti Abdul Rashid (2011) 50 Alumni Uthm Kejayaan Didikan Plsp-Ittho , UTHM , 35, ISBN:9789675457326 |
| Book Chapters |
| Mohd Fathullah Ghazali, Mohd Mustafa Al Bakri Abdullah, Aqmal Hidayat Jamel , Vertic Eridani Budi Darmawan, Azrin Hani Abdul Rashid (2025) Drilling Performance On Fly-Ash Geopolymers, Recent Developments Of Geopolymer Materials, Elsevier , 269, ISBN:9780443240683 |
| Abdussalam Al-hakimi Mohd Tahir, Azrin Hani Abdul Rashid, Siti Hana Nasir & Anis Amirah Nor Anuwar (2022) A Review On Bamboo Nonwoven Properties And Manufacturing Process For Thermal Insulator Applications, Bamboo: Perspective, Technology And Application, UTHM , 14, ISBN:9789672817741 |
| Anis Amirah Nor Anuwar, Azrin Hani Abdul Rashid, Abdussalam Al-hakimi Mohd Tahir & Mohd Nazrul Roslan (2022) Bamboo As A Potential Textile Fibre In Yarn Manufacturing, Bamboo: Perspective, Technology And Application, UTHM , 22, ISBN:9789672817741 |
| Noraini Marsi, Wardah Sidni, Anika Zafiah Mohd Rus, Azrin Hani Abdul Rashid, Aslinda Saleh and Razlin Abd Rashid (2020) Chapter 8: The Effects Of Lawsonia Inermis Pigmentation For Superhydrophobic Properties On Cotton Fabrics, Green Technology Of Natural Dyes For Sustainable Development On Textile Industry, UTHM , 59, ISBN:9789672389613 |
| Nur Athirah Huzaisham, Noraini Marsi, Anika Zafiah Mohd Rus, Amir Khalid, Azrin Hani Abdul Rashid, Rupashinii Thana Singam and Muhammad Haikal Mohd Fodzi (2019) A Review: Types And Characterization Of Bio-Green Plastics, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 1, ISBN:9789672306740 |
| Farasyafinaz Senusi, Salwa Mahmood, Aslinda Saleh Azrin Hani Abdul Rashid, Azli Nawawi (2019) Design For Manufacture And Assembly Improvement: A Case Study Of Knapsack Sprayer, Manufacturing Management And Improvement Case Studies Series 1, UTHM , 28, ISBN:9789672306542 |
| Muhammad Farid Shaari, Azrin Hani Abdul Rashid, Harris Mubashir Mohamad Isa, Nik Normunira Mat Hassan, Mohd Nazrul Roslan, Siti Hana Nasir, Nurul Zakiah Zamri Tan, Siti Nor Hawanis Husain (2019) Fabrication Process Of Cotton Waste For Bio-Green Planting Bag, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 19, ISBN:9789672306740 |
| Muhammad Farid Shaari, Azrin Hani Abdul Rashid, Norshuhaila Mohamed Sunar, Mohd Nazrul Roslan, Muhammad Zulkipli, Tengku Nur Azila Raja Mamat (2019) Investigation On Coconut Coir Reinforcement For Cotton Planting Bag Mechanical Properties, Advanced Technology Centre: Research And Innovation Series 3, UTHM , 51, ISBN:9789672306603 |
| Azrin Hani Abdul Rashid, Muhammad Farid Shaari, Mohd Yazid Yahya, Mohd Rozi Ahmad, Mohd Nazrul Roslan, Khalid Hasnan, Siti Hana Nasir, Nurul Zakiah Zamri Tan (2019) Investigation On The Effects Of Textile Structure Of Recycled Pet Bottle (R-Pet) As Newly Developed Composites For Impact Energy Absorption, Advanced Technology Centre: Research And Innovation Series 2, UTHM , 19, ISBN:9789672306504 |
| Muhammad Farid Shaari, Azrin Hani Abdul Rashid, Harris Mubashir Mohamad Isa, Nik Normunira Mat Hassan, Mohd Nazrul Roslan, Siti Hana Nasir, Nurul Zakiah Zamri Tan, Siti Nor Hawanis Husain (2019) Physical Characterization Of Cotton Waste For Bio-Green Planting Bag, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 43, ISBN:9789672306740 |
| Noraini Marsi, Fatin Nadiah Mat Jais, Anika Zafiah Mohd Rus, Salwa Mahmood, Azrin Hani Abdul Rashid, Nor Mazlana Main, Rupashinii Thana Singam, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2019) The Effects Of Lawsonia Inermis Pigmentation For Superhydrophobic Properties As Green Technology On Cotton Fabrics, Green Chemistry Towards Wastewater Treatment And Remediation (Series 1), UTHM , 96, ISBN:9789672306979 |
| Siti Hana Nasir, Mohd Nazrul Roslan, Khalid Hasnan, Azrin Hani Abdul Rashid, Helmy Mustafa El Bakri (2019) The Influence Of Functional And Comfort Parameters On The Design Characteristics Of Pressure Therapy Gloves, Advance Technology Centre Research And Innovation, UTHM , 1, ISBN:9789672306504 |
| TAN KOK KEONG, CHAN CHEE MING, AZRIN HANI BINTI ABDUL RASHID (2018) Protective Coating For Gabion Wires Against Weathering Elements And Site Conditions, Construction Materials And Technology Series 1, UTHM , 105, ISBN:9789672183198 |
| Azrin Hani Abdul Rashid, Noraini Masri, Md. Saidin Wahab, Mohd Faizal Esa and Bachik Abu Bakar (2017) Co-Kev Protective Panel: A High Impact Resistance Panel (Product Development Grant), Advanced Technology Centre: Research And Innovation Series 1, UTHM , 123, ISBN:9789672110101 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Azrin Hani Abd Rashid, Nurasyikin Misdan, Bachik Abu Bakar and Dalila Mohd Harun (2017) The Formulation And Synthesis Of Superhydrophobic Coating Based On Coconut Oil Reinforcing Natural Pigment For Self-Cleaning And Protective Nano-Coating, Advanced Technology Centre: Research And Innovation Series 1, UTHM , 107, ISBN:9789672110101 |
| General Publications |
| Prof. Madya Ts. Dr. Azrin Hani Abdul Rashid, Nurul Nabila Atiqa Ma’arof (2026) Empat Sistem Dan Portal Digital Perkasa Tadbir Urus Pengurusan Makmal Uthm Pagoh, UTHM , ISBN:- |
| Prof. Madya Ir. Ts. Dr. Salihatun Md Salleh, Prof. Madya Ts. Dr. Azrin Hani Abdul Rashid (2024) Anjur Majlis Apresiasi, Fakulti Teknologi Kejuruteraan Iktiraf Sumbangan Industri, UTHM , 1, ISBN:- |
| Azrin Hani Abdul Rashid and Azian Hariri (2023) Kaji Semula Pakaian Seragam Sekolah?, UTHM , 1, ISBN:- |
| Amran Mohd Zaid, Suraya Hani Adnan, Azrin Hani Abdul Rashid, Nur Hanis Hayati Hairom, Aimi Syamimi Ab Ghafar, Peniel Ang Soon Ern, Sim Sy Yi, Mazatusziha Ahmad, Mimi Suliza Muhamad, Joe Prasetijo, Mohammad Ashraf Abdul Rahman, Noraini Marsi, Ili Najaa Aimi Mohd Nordin, Amir Khalid and Abdul Mutalib Leman (2019) E-Dairi Atc Advanced Technology Centre Bil. 1/2019, UTHM , 1, ISBN:- |
| Journal |
| Nur Ain Arina Johan, Azrin Hani Abdul Rashid, Nur Azliatul Akmal Mohamad Azmin, Juliana Abdul Halip , Nik Normunira Mat Hassan, Nor Dalila Nor Affandi, Bilal Zahid, Anis Amirah Nor Anuwar (2026) Alkaline And Softening Treatment Of Bamboo Fibers For Better Yarn Spinnability Potential, JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 7, 56, ISSN:22897895 |
| Zamil Hisham Abdul Rashid, Nik Normunira Mat Hassan, Tasnim Zakepeli, Muhamad Farid Mohd Azmi, Noraini Marsi, Nur Faezah Yahya, Anika Zafiah Mohd Rus, Azrin Hani Abdul Rashid (2026) Characterization Of Non-Woven Bamboo Fiber Reinforced With Polyester Fiber As An Interior Insulation Material, JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 7, 46, ISSN:22897895 |
| Mohammad Na’aim Abd Rahim, Mohd Shukor Salleh, Saifudin Hafiz Yahaya, Sivarao Subramonian, Azrin Hani Abdul Rashid, Salah Salman Al-Zubaidi, Muhammad Hisyam Abdul Aziz (2026) Effect Of Fly Ash Content On Microstructure And Mechanical Properties Of Aluminium Matrix Composite Processed By Cooling Slope Casting, DIYALA JOURNAL OF ENGINEERING SCIENCES, COLLEGE OF ENGINEERING , UNIVERSITY OF DIYALA , 3, 121, ISSN:19998716 |
| Md Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid (2026) Low Velocity Impact Performances Prediction And Classification Of Damages For Fiber Reinforced Composites By Machine Learning Models, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, ELSEVIER , 6, 6845, ISSN:22140697 |
| Md. Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid (2026) Predicting Flexural Properties Of Fiber Reinforced Composites: An Experimental Dataset Analysis Using Machine Learning Models, NEXT MATERIALS, ELSEVIER , 4, 1, ISSN:29498228 |
| Md Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid (2026) Prediction And Optimization Of Tensile Strength And Damages In Fiber Reinforced Epoxy Composites By Machine Learning Models., HYBRID ADVANCES, ELSEVIER , 6, 1, ISSN:2773207X |
| Md Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli and Azrin Hani Abdul Rashid (2026) Prediction Of Tensile And Flexural Properties Of Fiber-Reinforced Epoxy Composites Using Machine Learning Models, FUNCTIONAL COMPOSITES AND STRUCTURES, INSTITUE OF PHYSICS , 6, 1, ISSN:26316331 |
| Md Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli and Azrin Hani Abdul Rashid (2026) Prediction Of Tensile And Flexural Properties Of Fiber-Reinforced Epoxy Composites Using Machine Learning Models., FUNCTIONAL COMPOSITES AND STRUCTURES, INSTITUTE OF PHYSICS , 4, 1, ISSN:26316331 |
| Md. Mominur Rahman Md. Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid, Tabrej Khan, Omar Shabbir Ahmed and Tamer A. Sebaey (2026) Review Of Predictions Of Tensile And Flexural Properties Of Fiber-Reinforced Composites Using Machine Learning Models, JOURNAL OF COMPOSITES SCIENCE, MDPI , 4, 1, ISSN:2504477X |
| Low Zi Qing, Mohd Afzanizam Mohd Rosli, Nurfarhana Salimen, Azrin Hani Abdul Rashid, SafarudinGazali Herawan (2025) Assessment Of Photovoltaic Thermal Efficiency Using Phase Change Material And Water-Channel Collector With T-Fin Design, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, SEMARAK ILMU PUBLISHING , 12, 75, ISSN:22897879 |
| Juliana Abdul Halip , Mohd Nazrul bin Roslan, Azrin Hani Abdul Rashid, Noor Aslinda Abu Seman, Nurazwa Ahmad, Ambigaipagan Nagasamy (2025) Brief Review Of Bamboo Particle-Based Composites: Parameter And Performances, FURNITURE AND WOODEN MATERIAL RESEARCH JOURNAL, BEKIR CIHAD BAL , 12, 487, ISSN:26368625 |
| Nurul Izzati Akmal Muhamed Rafaizul, Mohd Afzanizam Mohd Rosli, Poppy Puspitasari, Avita Ayu Permanasari, Norli Abdullah, Safarudin Gazali Herawan, Azrin Hani Abdul Rashid, Faridah Hussain (2025) Enhanced Efficiency Of Photovoltaic Thermal Systems Using Graphene Nanoplatelets Nanofluids, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, SEMARAK ILMU PUBLISHING , 4, 25, ISSN:22897879 |
| Chia Zhi Horng, Mohd Afzanizam Mohd Rosli, Jayaprakash Ponnaiyan, Nurfarhana Salimen, Safarudin Ghazali Herawan, Faridah Hussain, Azrin Hani Abdul Rashid (2025) Latent Heat Validation Of Phase Change Material Using T- History Method, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, SEMARAK ILMU PUBLISHING , 2, 249, ISSN:22897879 |
| Mohammad Na'aim Abd Rahim , Mohd Shukor Salleh , Saifudin Hafiz Yahaya , Sivarao Subramonian , Azrin Hani Abdul Rashid , Syarifah Nur Aqida Syed Ahmad , Salah Salman Al-Zubaidi (2025) Microstructural Investigation And Mechanical Properties Of Al2o3-Mwcnts Reinforced Aluminium Composite, AIMS MATERIALS SCIENCE, AIMS PRESS , 5, 318, ISSN:23720484 |
| Cheah Kai Xiang, Mohd Afzanizam Mohd Rosli, Probowo, Safarudin Gazali Herawan, Syamsul Hadi, Azrin Hani Abdul Rashid (2025) Performance Evaluation Of Photovoltaic Thermal Based Nanofluid Using Cfd Fluent With Various Inlet Velocities, CFD LETTERS, SEMARAK ILMU PUBLISHING , 9, 223, ISSN:21801363 |
| Md. Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid (2025) Review Of Predictions Of Impact Performances And Damages Of Fiber Reinforced Composite Using Machine Learning Approaches , MALAYSIAN JOURNAL ON COMPOSITE SCIENCE AND MANUFACTURING, AKADEMIA BARU , 3, 274, ISSN:27166945 |
| Abdulrahman Zahid Abdulkrem, Ahmad Safuan A Rashid, Talal Amhadi, Khairun Nissa Mat Said, Azrin Hani Abdul Rashid, Afiqah Ismail, Ali Dehghanbanadaki (2025) The Effectiveness Of Nonwoven Kenaf Geotextile In Improving Load Bearing Of Soft Soil, TRANSPORTATION INFRASTRUCTURE GEOTECHNOLOGY, SPRINGER NATURE LINK , 1, 1, ISSN:21967202 |
| Md. Mominur Rahman, Al Emran Ismail, Muhammad Faiz Ramli, Azrin Hani Abdul Rashid (2024) A Review Of Experimentation Numerical Simulation Of Low-Velocity Impact Performances And Damages Of Fiber-Reinforced Composites, JOURNAL OF ADVANCED RESEARCH IN APPLIED MECHANICS, SEMARAK ILMU PUBLISHING , 11, 147, ISSN:22897895 |
| Myia Yuzrina Zalkis Ayol, Mohd Yuhazri Yaakob, Meryl Anyie Tomy, Kamarul Amir Mohamed, Wan Hasrulnizzam Wan Mahmood, Azrin Hani Abdul Rashid, Zulfikar Achmad Jusuf (2024) Effect Of Fire-Retardant Ratios In Kenaf Fiber For Fire Resistance Properties And Acoustical Performance, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 196, ISSN:2229838X |
| Mohammad Na’aim Abd Rahim, Mohd Shukor Salleh, Saifudin Hafiz Yahaya, Sivarao Subramonian, Liew Pay Jun, Azrin Hani Abdul Rashid, Syarifah Nur Aqida Syed Ahmad, Salah Salman Al-Zubaidi (2024) Effect Of Graphene Addition On Microstructure And Mechanical Properties Of Cast Aluminium Alloy Composite, JOURNAL OF ADVANCED RESEARCH IN MICRO AND NANO ENGINEERING, SEMARAK ILMU PUBLISHING , 11, 66, ISSN:27568210 |
| Oi-Ka Jong, Nor Mazlana Main, Azrin Hani Abdul Rashid, Noraini Marsi, Rosniza Hussin, Siti Aida Ibrahim (2024) Effect Of Moisture Content On The Tensile Properties Of Areca Leaf Sheath, INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, PENERBIT UNIMAP, UNIVERSITI MALAYSIA PERLIS , 12, 121, ISSN:22321535 |
| Noraishah Zulhizad, Azrin Hani Abdul Rashid, Nurul Arisya Abd Haris, Muhammad Farid Shaari, Mohd Afzanizam Mohd Rosli, Ahmad Safuan A Rashid, Abdussalam Al-hakimi Mohd Tahir, Abdul Waqar Rajput (2024) Moisture And Compression Properties Of Different Composition Of Kenaf/Bamboo/Polyester Thermal Bonded Nonwoven Web For Mattress Filler, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 165, ISSN:2229838X |
| Nurul Zakiah Zamri Tan, Azrin Hani Abdul Rashid, Md. Mominur Rahman Mohd, Mohd Yazid Yahya, Mohd Yuhazri Yaakob, Risby Mohd Sohaimi & Anis Amirah Nor Anuwar (2024) Quasi-Static Indentation Testing Of Stainless Steel Wire Mesh / Epoxy Laminated Composites, DEFENCE S AND T TECHNICAL BULLETIN, SCIENCE AND TECHNOLOGY RESEARCH INSTITUTE FOR DEFENCE , 4, 49, ISSN:19856571 |
| Abdussalam Al-hakimi Mohd Tahir, Azrin Hani Abdul Rashid, Siti Hana Nasir, Mazatusziha Ahmad and Anis Amirah Nor Anuwar (2023) Thermal Resistance And Bursting Strength Analysis Of Multilayer Needle-Punched Bamboo/Polyester Nonwoven Batt, THE JOURNAL OF THE TEXTILE INSTITUTE, TAYLOR AND FRANCIS GROUP , 7, 974, ISSN:00405000 |
| Asyran Muhammad Azman, Azrin Hani Abdul Rashid, Nurul Zakiah Zamri Tan (2022) Energy Absorption Behaviour Of R-Pet/Epoxy Laminated Composite With Varying Matrix Ratio In Quasi-Static Indentation Test, PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY, UTHM , 6, 828, ISSN:27735303 |
| Muhammad Aqil Alimin Mohd Ridzuan, Azrin Hani Abdul Rashid, Nurul Zakiah Zamri Tan, Asyran Muhammad Azman (2022) Numerical Simulation Of Cross-Ply R-Pet Laminated Composites Subjected To Quasi-Static Indentation Test, PROGRESS IN ENGINEERING APPLICATION AND TECHNOLOGY, UTHM , 6, 769, ISSN:27735303 |
| Anis Amirah Nor Anuwar, Azrin Hani Abdul Rashid, Suzi Salwah Jikan, Mohd Nazrul Roslan, Abdussalam Al-Hakimi Mohd Tahir, Nurul Husna Zolkifflee and Fathee Aizat Mohd Razal (2022) The Effect Of Alkaline Treatment On The Schizostachyum Grande Fibre For Textile Applications, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 37, ISSN:26007916 |
| Oi-Ka Jong, Siti Adayu Nasharidan, Azrin Hani Abdul Rashid, Nor Mazlana Main, Yong Tze Mi, Mohd Nazrul Roslan, Shaiful Rizal Masrol (2021) Factorial Analysis Of Tensile Properties Of Areca Leaf Sheath (Als) Subjected To Flattening, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 2, 82, ISSN:2229838X |
| Nurul Zakiah Zamri Tan , Azrin Hani Abdul Rashid, Fatin Nurhidayah Mohd Shaidi, Nur Izzati Ibrahim, Razlin Abdul Rashid , Mohd Yazid Yahya, Mohd Yuhazri Yaakob & Risby Mohd Sohaimi (2021) Quasi-Static Indentation Behaviour Of Unidirectional R-Pet / Kevlar Hybrid Laminated Composites, DEFENSE SCIENCE AND TECHNOLOGY TECHNICAL BULLETIN, SCIENCE & TECHNOLOGY RESEARCH INSTITUTE FOR DEFENCE (STRIDE) , 11, 144, ISSN:19856571 |
| Rupashinii Thana Singam, Noraini Marsi¿, Azrin Hani Abdul Rashid, Siti Hana Nasir, Siti Aida Ibrahim, Mohd Nazrul Roslan, Nur Athirah Huzaisham and Muhammad Haikal Mohd Fodzi (2020) A Review On Characteristics And Potential Applications Of Henna Leaves (Lawsonia Inermis), JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 3, 603, ISSN:15461955 |
| Muslihah Mokeramin , Mohd Nazrul Roslan *, Azrin Hani Abdul Rashid , Siti Hana Nasir , Juliana Abdul Halip (2020) Chemical Effect On The Mechanical Properties Of Bamboo Fiber For Textile: A Review, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING , 10, 353, ISSN:22783091 |
| MUHAMMAD FALAQ MUHAMMAD FAISAL, AZMAN HASSAN, KHONG WUI GAN, MOHD NAZRUL ROSLAN, AZRIN HANI ABDUL RASHID (2020) Effects Of Sulphuric Acid Concentrations During Solvolysis Process Of Carbon Fiber Reinforced Epoxy Composite, SAINS MALAYSIANA, UNIVERSITI KEBANGSAAN MALAYSIA , 9, 2073, ISSN:01266039 |
| Mohammad Gharehzadeh Shirazi, Ahmad Safuan A Rashid, Ramli Nazir, Azrin Hani Abdul Rashid & Suksun Horpibulsuk (2020) Enhancing The Bearing Capacity Of Rigid Footing Using Limited Life Kenaf Geotextile Reinforcement, JOURNAL OF NATURAL FIBERS, TAYLOR & FRANCIS , 11, 1, ISSN:1544046X |
| Anis Amirah Nor Anuwar , Najwa Wajihah Mohd Rusli , Azrin Hani Abdul Rashid, Nazaruddin Mohd Nawi and Abdussalam Al-hakimi Mohd Tahir (2020) Evaluation Of Kenaf Fibre For The Development Of Kenaf/Polyester Hybrid Yarn, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 9, 295, ISSN:22783091 |
| Lai Zhee Yen, Siti Hana Nasir, Nur Athirah Huzaisham, Salwa Mahmood, Noraini Marsi, Azrin Hani Abdul Rashid, Helmy Mustafa El Bakri and Mohd Iqbal Misnon (2020) The Influence Of Physical Properties On Comfort Performance Of Bedsheet Fabrics , INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), IAEME PUBLICATION , 11, 1018, ISSN:09766499 |
| Noraini Marsi, Nur Athirah Huzaisham, Anika Zafiah Mohd Rus, Thineshnaidu Lecthumanan, Salwa Mahmood, Shaiful Rizal Masrol, Azrin Hani Abdul Rashid, Muhammad Haikal Mohd Fodzi and Rupashinii Thana Singam (2020) The Mechanical Performance Of Tile Based On Plastic Waste (Pw) Mixed Wood Waste (Mww), JOURNAL OF COMPUTATIONAL AND THEORETICAL NANOSCIENCE, AMERICAN SCIENTIFIC PUBLISHERS , 3, 795, ISSN:15461955 |
| Muhammad Farid Shaari, Tan Tian Gan, Azrin Hani Abdul Rashid, Nurul Zakiah Zamri Tan, Siti Hana Nasir, Mohd Nazrul Roslan, Chan Chee Ming, Tengku Nur Azila Raja Mamat (2019) Analysis On Load Resistance Characteristic For Kenaf And Woven Coir Fabrics , JOURNAL OF INDUSTRY, ENGINEERING AND INNOVATION , FAZ PUBLISHING , 11, 1, ISSN:26727382 |
| Mohd Nazrul Roslan, Mohd Yazid Yahya , Zaini Ahmad and Azrin Hani Abdul Rashid (2019) Axial Impact Crushing Behaviour Of Thin-Walled Braided Composite Tubes: Experimental Comparison On Basalt Fibre And Glass Fibre Reinforcement, JOURNAL OF PHYSICS: CONFERENCE SERIES, Journal of Physics: Conference Series , 1, 1, ISSN:17426588 |
| Noraini Marsi, Nur Athirah Huzaisham, Azrul Azlan Hamzah, Atiqah Zafirah Zainudin, Anika Zafiah Mohd Rus, Abdul Mutalib Leman,Rohani Rahmad,Salwa Mahmood, Azrin Hani Abdul Rashid,Dalila Mohd Harun and Nofrizalidris Darlis (2019) Biodegradable Plastic Based On Orange Peel For Packaging Application, JOURNAL OF DESIGN FOR SUSTAINABLE AND ENVIRONMENT, FAZPUBLISHING , 10, 1, ISSN:26827441 |
| Siti Nor Hawanis Husain, Nur Aiman Abdul Razak, Azrin Hani Abdul Rashid, Musli Nizam Yahya, Nurul Zakiah Zamri Tan, Muhamad Farid Shaari, Salwa Mahmood, Noraini Marsi & Harris Mubashir Nohamad Isa (2019) Development Of Kenaf Nonwoven As Automotive Noise Absorption, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication Ltd , 6, 101, ISSN:16627482 |
| Mohammad Gharehzadeh Shirazi, Ahmad Safuan A Rashid, Ramli Bin Nazir, Azrin Hani Abdul Rashid, Azman Kassim, Suksun Horpibulsuk (2019) Investigation Of Tensile Strength On Alkaline Treated And Untreated Kenaf Geotextile Under Dry And Wet Conditions, GEOTEXTILES AND GEOMEMBRANES, Elsevier , 3, 1, ISSN:0266-114 |
| Azrin Hani Abdul Rashid, Siti Nor Hafiza Mohamad, Khairani Nasir, Muhammad Farid Shaari, Mohd Nazrul Roslan, Noraini Marsi, Siti Hana Nasir, Mohd Faizal Esa, Salwa Mahmood (2019) Puncture Impact Performance Of Coir-Aramid/Epoxy Hybrid Composite: Effects Of Stacking Configurations, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, International Journal of Mechanical Engineering and Robotics Research , 5, 368, ISSN:22780149 |
| OI-KA JONG , NOR MAZLANA MAIN , AZRIN HANI ABDUL RASHID3, NORAINI MARSI and & SHAIFUL RIZAL MASROL5 (2019) Tensile Properties Of Areca Leaf Sheath (Als) Subjected To Flattening Process For Disposal Plate Making Application: Effect Of Thickness And Flattering Pressure, INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH ADN DEVELOPMENT , TRANSTELLER , 11, 21, ISSN:22496890 |
| Nur Athirah Huzaisham, Noraini Marsi, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan, Azrin Hani Abdul Rashid, Muhammad Haikal Mohd Fodzi and Rupashinii Thana Singam (2019) Tensile Strength Analysis Of Biodegradable Planting Bag Derived From Banana (Musa Paradisiaca) Peel, TEST ENGINEERING & MANAGEMENT, THE MATTINGLEY PUBLISHING CO., INC. , 12, 2815, ISSN:01934120 |
| Noraini Marsi, Nur Athirah Huzaisham, Anika Zafiah Mohd Rus, Anis Nasuha Noor Azman, Ahmad Sawal Ithnin, Azrin Hani Abdul Rashid, Salwa Mahmood, Nurhafizzah Hassan and Rohani Rahmad (2019) The Effects Of Superhydrophobic Coating Based On Hylocereus Polyrhizus Pigment For Piping Surface, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WARSE , 11, 103, ISSN:22783091 |
| Khairani Nasir, Azrin Hani Abdul Rashid, Nurul Atikah Abd. Razak, Muhammad Farid Shaari, Mohd Nazrul Roslan, Shazarel Shamsudin, Mohd Shukri Ansar, Siti Nor Hawanis Husain, Syafiqah Dzulkefli, Noraini Marsi (2019) The Tensile Performance Of R-Pet Bottle String: Effects Of Different String Sizes And Cutting Axes, UNIVERSAL JOURNAL OF MECHANICAL ENGINEERING , HORIZON RESEARCH PUBLISHING , 12, 1, ISSN:23323361 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Salwa Mahmood, Azrin Hani Abdul Rashid, Rupashinii Thana Singam, Muhammad Haikal Mohd Fodzi, Nur Athirah Huzaisham (2019) Uv Exposure Of The Surface Coating Sustainable Polymer Composite, INTERNATIONAL JOURNAL OF ADVANCED TRENDS IN COMPUTER SCIENCE AND ENGINEERING, WARSE , 11, 144, ISSN:22783091 |
| Mohd Nazrul Roslan, Mohd Yazid Yahya, Zaini Ahmad & Azrin Hani Abdul Rashid (2018) Energy Absorption Behaviour Of Braided Basalt Composite Tube, ADVANCED COMPOSITE MATERIALS, Taylor & Francis , 9, 467, ISSN:09243046 |
| Najwa Wajihah Mohd Rusli, Azrin Hani Abdul Rashid, Mohd Rozi Ahmad, Mohd Nazrul Roslan, Dalila Mohd Harun, Syafikah Che Ismail1 (2018) Evaluation Of Kenaf/Polyester Fiber Blended Sliver Produced From Carding Machine , INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY , Science Publishing Corporation , 12, 374, ISSN:2227524X |
| A.J. Jalil, S. Mahmood, A.H.A. Rashid, S.H. Nasir, S.A. Ibrahim & M.R. Ahmad (2018) Extraction Of Eco-Friendly Natural Dyes From Pina Leaves And Their Application On Wool Fabrics, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 382, ISSN:2227524X |
| Noraini Marsi, Tan Ka Seng, Anika Zafiah Mohd Rus, Azrin Hani Abdul Rashid and Nor Mazlana Main (2018) Natural Pigment Based On Orange Fruit For Superhydrophobic Dyeing In Cotton Knitted Textile Application, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), Engg Journals Publications , 10, 1, ISSN:23198613 |
| M. Nazrul Roslan,M. Yazid Yahya, Z. Ahmad, Iqbal Mokhtar, A.R. Azrin Hani (2016) Effect Of Fiber Tow Density And Braid Angle Of Braided Basalt Composite Tube Under Crushing Impact, INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES, Institute of Advanced Science Extension (IASE) , 1, 14, ISSN:2313-626X |
| AR Azrin Hani (2015) Impact Behaviour Of Woven Coir-Epoxy Composite: Effects Of Woven Density And Woven Fabric Treatment, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS, SAGE , 1, 1, ISSN:14644207 |
| Azrin Hani (2014) Impact Behaviour Of Woven Coir-Epoxy Composite Prepared By Compression Moulding And Vacuum Bagging Methods, JOURNAL OF APPLIED SCIENCE AND AGRICULTURE, AENSI , 8, 333, ISSN:18169112 |
| Azrin Hani (2013) Analysis Of Woven Natural Fiber Fabrics Prepared Using Self-Designed Handloom, INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (IJAME), UMP Publisher , 7, 1197, ISSN:22298649 |
| Azrin Hani (2013) Impact And Flexural Properties Of Imbalance Plain Woven Coir And Kenaf Composite, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication , 1, 81, ISSN:- |
| Azrin Hani (2013) Influence Of Woven And Cross-Ply Laminates On Mechanical Properties Of Coir Epoxy Composite, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 4, 136, ISSN:- |
| Azrin Hani (2012) Body Armor Technology: A Review Of Materials, Construction Techniques And Enhancement Of Ballistic Energy Absorption, ADVANCED MATERIALS RESEARCH, Trans Tech Publication , 3, 806, ISSN:- |
| Azrin Hani (2011) Mechanical Properties Evaluation Of Woven Coir And Kenaf Reinforced Epoxy Composites, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 7, 36, ISSN:- |
| Prosiding / Seminar |
| Siti Nor Hawanis Husain, Azrin Hani Abdul Rashid, Abdussalam Al-Hakimi Mohd Tahir, Muhammad Farid Shaari, Siti Hana Nasir, Siti Aida Ibrahim, Khairani Nasir, Ngoi Pik Kuan and Mohd Fathullah Ghazli (2023) The Influence Of Fibre Feeder Speed And Stacking Layers On Physical Properties Of Needle-Punched Nonwovens From Industrial Cotton Waste, SPRINGER LINK , 367, ISBN:9789819928507 |
| Nur Syafikah Mohd Anuar, Aliff Hisyam A Razak, Wendy Yen Wee Ni, Mahiratul Husna Mustaffar, Azrin Hani Abdul Rashid, Sity Aishah Mansur, Nor Faizah Razali (2022) Evaluation Of Natural Rubber Latex Film Consisting Cassava Peel As A Bio-Based Filler For Biodegradable Gloves, AIP PUBLISHING , 1, ISBN:0094243X |
| M T A Al-Hakimi, A R Azrin Hani, G M Q Didi, and N A Anis Amirah (2021) Porosity And Thermal Resistance Properties Of Needle-Punched Nonwovens Cotton And Polyester, AIP PUBLISHING , 0201151, ISBN:9780735441187 |
| Z. T. Nurul Zakiah, A. R. Azrin Hani and M. Reshevarmen (2021) Puncture Impact Performance Of Rpet/Kevlar Hybrid Laminated Composite, AIP PUBLISHING , 0201781, ISBN:9780735441187 |
| Siti Nor Hawanis Husain, Azrin Hani Abdul Rashid*, Muhammad Farid Shaari, Mohd Nazrul Roslan, Nik Normunira Mat Hassan, Mohd Rozi Ahmad, Razlin Abd Rashid (2019) Mechanical Properties Evaluation Of Nonwoven Industrial Cotton Waste Produced By Needle Punching Method, IOP PUBLISHING , 1, ISBN:1757899X |
| Mohd Nazrul Roslan *, Mohd Yazid Yahya, Zaini Ahmad, Azrin Hani Abdul Rashid, Wen Xue Wang (2018) Energy Absorption Capacity Of Basalt Sandwich Composite Cylinder Subjected To Axial Compression Loadings, TRANS TECH PUBLICATIONS, SWITZERLAND , 7, ISBN:16629752 |
| Muhammad Farid Shaari, Ibrahim Ismail, Mohd Zamir Zakwan Mohammad Rasli, Wan Akashah Wan Jamaludin, Harris Mubashir Mohammad Isa, Azrin Hani Abdul Rashid (2017) Design And Development Of Automatic Sharia Compliant Wheelchair Wheels Cleaner, AIP Publishing , 020003-1, ISBN:9780835414990 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Mohd Razali Ibrahim, Syahir Arif Samsuddin, and Azrin Hani Abdul Rashid (2017) The Synthesis And Surface Properties Of Newly Eco-Resin Based Coconut Oil For Superhydrophobic Coating , KEY ENGINEERING MATERIALS , 59, ISBN:9783035711585 |
| A.R Azrin Hani, M.N Roslan, N. Marsi, N.S Azman, R. Ahmad, M. Mariatti (2016) Ballistic Impact Response Of Woven Hybrid Coir/Kevlar Laminated Composites, EDP Sciences , 1 , ISBN:2261236X |
| Azrin Hani (2010) Development Of Woven Coir/Jute And Its Properties Evaluation, USM |
| Azrin Hani Binti Abdul Rashid (2010) Lean Manufacturing System Assessment In Sme: A Case Study |
PROFESSIONAL CONSULTATION
| ID/CODE | PROJECT | CLIENT | START DATE | END DATE |
|---|---|---|---|---|
| P365 | SUSTAINABLE INITIATIVES FOR RECYCLING AND ENVIRONMENTAL HEALTH (SIREH2025) | UCSB | 29/07/2025 | 29/07/2025 |
| PS105 | CONSULTATION ON RESOURCES PORTAL ON LOW COST AUTOMATION - PHASE 3 | Mr. Poo Kok Chong | 10/07/2018 | 31/01/2019 |
| PS100 | CONSULTATION ON RESOURCES PORTAL ON LOW COST AUTOMATION - PHASE 2 | MALAYSIAN TEXTILE AND APPAREL CENTRE | 07/06/2018 | 31/12/2018 |
| PS083 | CONSULTATION ON RESOURCES PORTAL ON LOW COST AUTOMATION | MALAYSIAN TEXTILE AND APPAREL CENTRE | 01/01/2018 | 31/01/2019 |
| PS015 | PERUNDINGAN PENGHASILAN PRODUK INOVASI SEKOLAH MENENGAH SAINS MUAR (SAMURA) | SEKOLAH MENENGAH SAINS MUAR (PENGETUA SEKOLAH MENENGAH SAINS MUAR) | 06/10/2015 | 19/10/2015 |
CONSULTANCIES
| Year | Description | Level |
|---|---|---|
| 2025 | Head for PELANTIKAN SEBAGAI KETUA PROJEK DALAM PROJEK PENGUJIAN, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2025 | University |
| 2025 | for KOLOKIUM PENYELIDIKAN SEM 1 SESI 2024/2025 FAKULTI TEKNOLOGI KEJURUTERAAN, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2025 | University |
| 2025 | Head for PELANTIKAN SEBAGAI KETUA PROJEK DALAM PROJEK PENGUJIAN, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2025 | University |
| 2025 | Speaker for PROGRAM STEP BY STEP GUIDE FOR MANUSCRIPT WRITING, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2025 | University |
| 2025 | Speaker for Bengkel Mendeley, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, July 2025 | University |
| 2025 | Committee Member for PERANCANGAN DAN PEMANTAUAN SASARAN KERJA TAHUNAN UNIVERSITI, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2025 | University |
| 2025 | Advisor/Chairman for THE 4th INTERNATIONAL RESEARCH & INNOVATIVE TECHNOLOGY COMPETITION & CONFERENCE 2025 (i-RITEC2025), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2025 | University |
| 2024 | Assistant Manager for 3rd International Conference on Advanced Science and Engineering (ICASE 2024) , 3rd International Conference on Advanced Science and Engineering (ICASE 2024) , Malaysia, June 2024 | International |
| 2024 | Guest Speaker for Kursus Mendeley, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2024 | University |
| 2024 | Guest Speaker for Program KTP: High Impact Early Career Development bersama SM Sains Muar, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2024 | State |
| 2024 | External Examiner for Pemeriksa luar tesis Sarjana Sains, Universiti Malaysia Perlis, Malaysia, October 2024 | National |
| 2024 | for Penasihat Pasukan Inovasi SM Sains Muar, SM Sains Muar, Johor, Malaysia, September2024 | National |
| 2024 | Guest Speaker for 2024 International Camp of Smart & Sustainable Textiles , National Taiwan Normal University, Taiwan, October 2024 | International |
| 2024 | Chairperson of VIVA for Pengerusi VIVA MohammadLuqman Hakim, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2024 | University |
| 2023 - 2025 | Committee Member for COMMITEE OF TECHNICAL BEREAU FOR TALENT DEVELOPMENT, MALAYSIAN TEXTILE AND APPAREL CENTRE, Malaysia, November 2023 | National |
| 2023 | Instructor/lecturer for RESEARCH METHODOLOGY LECTURER FOR POSTGRADUATE FROM CHINA, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, May 2023 | University |
| 2022 | Committee Member for Ahli jawatankuasa bagi kumpulan kerja berkenaan semakan semula MS 1192 (WG/Q/1-3), Jabatan Standard Malaysia, Malaysia, October 2022 | National |
| 2020 - 2022 | Committee Member for Ahli jawatankuasa standard kebangsaan berkenaan Textiles and Apparels (NSC Q), Jabatan Standard Malaysia, Malaysia, October 2020 | National |
| 2018 - 2022 | Committee Member for Jawatankuasa Teknikal Technical Textiles (TC/Q/2) untuk penyediaan Malaysian Standard, Jabatan Pembangunan Standard, SIRIM STS Sdn Bhd, Malaysia, March 2018 | National |
SUPERVISION
| Year | Description |
|---|---|
| 2026 | Examiner for Muhammad Akif Bin Muhammad Azam Azhar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Examiner for Siti Nur 'Aisyah Binti Jamalludin, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Examiner for Siti Nur 'Aisyah Binti Jamalludin, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Supervisor for Alia Ashikin Bt Mohamad Riduan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Supervisor for Ameer Irfan Bin Zulkefle, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Supervisor for Muhamad Haziq Bin Jawide, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Supervisor for Muhamad Haziq Bin Jawide, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Supervisor for Muhammad Fakhrul Ikhwan Bin Bazli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2026 | Supervisor for Muhammad Fakhrul Ikhwan Bin Bazli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2026 |
| 2025 | Advisor/Chairman for PENASIHAT SEKRETARIAT MAHASISWA ANAK PERAK (SEMARAK) UTHM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2025 |
| 2025 | Examiner for Ahmad Daniel Bin Mohd Naffree, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Hazwan Bin Arbaain, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Intan Nur Zalikha Binti Zahari, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Madhanamohan A/L Podawasan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Muhamad Ihtifazhuddin Bin Nor Azmi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Muhammad Aiman Akmal Bin Mohamad Najmie, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Nur Aleesya Emaira Binti Zamani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Nur Fatin Adlina Binti Ismail, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Nur Hasrezal Muhammad Bin Md Isa, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Nurul Athirah Binti Hasnan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Examiner for Sofea Binti Shaiful Bhari, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | External Assessor / External Reviewer for APPOINTMENT AS AN EXTERNAL EXAMINER FOR MASTER BY RESEARCH THESIS, Universiti Teknikal Malaysia Melaka (UTeM), Malaysia, August 2025 |
| 2025 | Supervisor for Alia Ashikin Bt Mohamad Riduan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Supervisor for Ameer Irfan Bin Zulkefle, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2025 | Supervisor for Nur Diyana Nabila Binti Abdul Manaf, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2025 |
| 2024 | Co-Supervisor for Mohd Rashidee Bin Mohd Zamberi, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Ahmad Daniel Bin Mohd Naffree, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Khatheline Shantie Anak Peter, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Khatheline Shantie Anak Peter, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Madhanamohan A/L Podawasan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Hariz Bin Ismail, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Muhammad Hariz Bin Ismail, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Nur Aida Afiqah Binti Hashinoor, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Nur Aida Afiqah Binti Hashinoor, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Examiner for Nur Irdina Binti Sazali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Main Supervisor for Erwan Bin Muhammed Ma'Asus, PhD, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Main Supervisor for Noraishah Binti Zulhizad, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Main Supervisor for Nur Azliatul Akmal Binti Mohamad Azmin, MSc, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Supervisor for Aina Binti Jamaluddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Supervisor for Aina Binti Jamaluddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2024 | Supervisor for Nur Diyana Nabila Binti Abdul Manaf, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2024 |
| 2023 | Chairperson of VIVA for CHAIRPERSON OF VIVA-VOCE - ADYLA ILLYANA, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September2023 |
| 2023 | Co-Supervisor for Erwan Bin Muhammed Ma'Asus, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Co-Supervisor for Mohd Rashidee Bin Mohd Zamberi, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Co-Supervisor for Muhamad Nurhafizuddin Nadzmi Bin Mohamad Azmi, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Co-supervisor for Md. Mominur Rahman, PhD, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Committee Member for EDITORIAL TEAM MUCET 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2023 |
| 2023 | Examiner for Matthew Brendon Foo, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Matthew Brendon Foo, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Mehgalaa A/P Ravichandran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Mehgalaa A/P Ravichandran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Muhammad Akmal Bin Baharum, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Muhammad Akmal Bin Baharum, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Nur Irdina Binti Sazali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Nurhani Syairah Binti Anuar Shazuki, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Nurhani Syairah Binti Anuar Shazuki, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Shasmita Lakshmi A/P Murualikaran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Examiner for Shasmita Lakshmi A/P Murualikaran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | External Examiner for EXTERNAL EXAMINER FOR MSc STUDENT - DARMAHSSILAN, UniMAP, PERLIS, Malaysia, October 2023 |
| 2023 | Module Developer for PEMURNIAN MODUL PENGAJARAN MAKMAL KEJURUTERAAN 1, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2023 |
| 2023 | Supervisor for Muhammad Adam Bin Shamsul Harisah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Supervisor for Muhammad Adam Bin Shamsul Harisah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2023 | Supervisor for Muhammad Hafizuddin Bin Ahmad Mohsin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2023 |
| 2022 | Co-Supervisor for Azrul Asraff Bin Saadon, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Azrul Asraff Bin Saadon, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Cheong Jia Jun, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Cheong Jia Jun, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Erwan Bin Muhammed Ma'Asus, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Mohd Rashidee Bin Mohd Zamberi, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Muhamad Nurhafizuddin Nadzmi Bin Mohamad Azmi, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Nur Ain Balqis Binti Abdul Manaf, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-Supervisor for Nur Ain Balqis Binti Abdul Manaf, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Co-supervisor for Nur Ain Arina Binti Johan, MSc, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Mc Andriano Leo Anak Francis Ijau Hillary, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Mc Andriano Leo Anak Francis Ijau Hillary, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Muhammad Akmal Zulhilmi Bin Ajis, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Muhammad Akmal Zulhilmi Bin Ajis, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Nur Aiman Fazrullillahi Bin Ayub, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Nur Aiman Fazrullillahi Bin Ayub, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Nurshuhadah Binti Baharum, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Nurshuhadah Binti Baharum, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Siti Hasmah Binti Syarifuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Examiner for Siti Hasmah Binti Syarifuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Main Supervisor for Ngoi Pik Kuan, MSc, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Nurul Arisya Binti Abd Haris, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Nurul Arisya Binti Abd Haris, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Nurul Izzanti Binti Nor Azian, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2022 | Supervisor for Nurul Izzanti Binti Nor Azian, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022 |
| 2021 | Co-Supervisor for Ain Nadhirah Binti Ahmed Khalid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Co-Supervisor for Ain Nadhirah Binti Ahmed Khalid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Co-supervisor for Nur Syafikah Binti Mohd Anuar, MSc, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Geevendran A/L Gunasegaran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Jamalullail Bin Jamali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Jamalullail Bin Jamali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Kong Pei Yee, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Kong Pei Yee, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Syahrizan Bin Azlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Examiner for Syahrizan Bin Azlan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | External Examiner for Panel penilai pengiktirafan program Sarjana Sains Tekstil (AS702), UiTM Shah Alam, UiTM Shah Alam, Malaysia, November 2021 |
| 2021 | Supervisor for Asyran Muhammad Bin Azman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Asyran Muhammad Bin Azman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Muhammad Aqil Alimin Bin Mohd Ridzuan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Muhammad Aqil Alimin Bin Mohd Ridzuan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Nur Ain Arina Binti Johan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2021 | Supervisor for Nur Ain Arina Binti Johan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021 |
| 2020 | Examiner for Ilya Fildzah Zamelia Binti Jamil, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Ilya Fildzah Zamelia Binti Jamil, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Nur Aini Binti Abd Halim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Nur Aini Binti Abd Halim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Nur Athirah Nabilah Binti Asmiza, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Nur Athirah Nabilah Binti Asmiza, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Nur Farah Hanis Binti Sharif, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Examiner for Nur Farah Hanis Binti Sharif, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Main Supervisor for Anis Amirah Binti Nor Anuwar, MSc, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Fatin Nurhidayah Binti Mohd Shaidi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Fatin Nurhidayah Binti Mohd Shaidi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Nur Izzati Binti Ibrahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2020 | Supervisor for Nur Izzati Binti Ibrahim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020 |
| 2019 | Co-supervisor for Fatin Nadiah Binti Mat Jais, MSc, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Atiqah Binti Md Fadzir, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Atiqah Binti Md Fadzir, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Ayuni Binti Marzuki, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Ayuni Binti Marzuki, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Lyana Syahirah Binti Suriansah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Lyana Syahirah Binti Suriansah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Syuhada Binti Mohd Yaacob, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nur Syuhada Binti Mohd Yaacob, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nurfarhani Binti Hishamuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Examiner for Nurfarhani Binti Hishamuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Industrial Training Supervisor for Abdussalam Al-Hakimi Bin Mohd Tahir, Top Glove Sdn. Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Azween Adleena Binti Abdul Nasir, Top Glove Sdn. Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Busyra Amanina Binti Abdul Halim, Top Glove, 2019 |
| 2019 | Industrial Training Supervisor for Muhammad Aqil Mirza Bin Rusidi, Plb Engineering Berhad, 2019 |
| 2019 | Industrial Training Supervisor for Nor Muhammad Bin Mat Saad, Kitacon Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Norbalqis Mayangsari Binti Mohamad Yusri, Kitacon Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Nur Fazliyana Binti Razali, Top Glove, 2019 |
| 2019 | Industrial Training Supervisor for Nurhidayana Binti Sha'Ban, Kitacon Sdn Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Nurul Farhana Binti Mohammad Rosly, Top Glove, 2019 |
| 2019 | Industrial Training Supervisor for Nurul Izlin Binti Mazlin, Top Glove Sdn. Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Rozita Binti Jumadi @ Juri, Top Glove Sdn. Bhd, 2019 |
| 2019 | Industrial Training Supervisor for Syafikah Binti Che Ismail, Top Glove, 2019 |
| 2019 | Main Supervisor for Abdussalam Al-Hakimi Bin Mohd Tahir, MSc, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Main Supervisor for Nurul Zakiah Binti Zamri Tan, PhD, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Anis Amirah Binti Nor Anuwar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Reshevarmen A/L Mani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Reshevarmen A/L Mani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Siti Adayu Binti Nasharidan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Syafiqah Binti Dzulkefli, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2019 | Supervisor for Syafiqah Binti Dzulkefli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019 |
| 2018 | Co-supervisor for Jong Oi Ka, MSc, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Co-supervisor for Muhammad Haikal Bin Mohd Fodzi, MSc, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Anis Amirah Binti Nor Anuwar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Busyra Amanina Binti Abdul Halim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Busyra Amanina Binti Abdul Halim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Fatin Syahira Binti Othman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Fatin Syahira Binti Othman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Nurul Atikah Binti Abd Razak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Nurul Atikah Binti Abd Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Siti Adayu Binti Nasharidan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Syafikah Binti Che Ismail, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2018 | Supervisor for Syafikah Binti Che Ismail, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018 |
| 2017 | Co-Supervisor for Harris Mubashir Bin Mohamad Isa, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Harris Mubashir Bin Mohamad Isa, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Nur Amira Syaqilla Binti Rosdin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Nur Amira Syaqilla Binti Rosdin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Nurul Aqilah Binti Sazali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Nurul Aqilah Binti Sazali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Tang Tiang Gan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-Supervisor for Tang Tiang Gan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Co-supervisor for Siti Nor Hawanis Binti Husain, MSc, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Mohammad Shahipul Naim Bin Mohd Peredi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Mohammad Shahipul Naim Bin Mohd Peredi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Mohd Khawarizmi Bin Surani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Mohd Khawarizmi Bin Surani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Mohd Shahrizan Bin Mohd Aludin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Mohd Shahrizan Bin Mohd Aludin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Muhammad Afiq Adli Bin Mazlan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Muhammad Afiq Adli Bin Mazlan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Muhammad Afnan Bin Jamri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Muhammad Afnan Bin Jamri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Muhammad Azri Zaidi Bin Mohd Zamri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Muhammad Azri Zaidi Bin Mohd Zamri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Examiner for Nur Solehah Binti Zolkefli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Industrial Training Supervisor for Dhameeri Bin Mohd Razip, Jana Dcs Sdn Bhd, 2017 |
| 2017 | Industrial Training Supervisor for Lee Yi Peng, Schaefer Systems International Sdn.Bhd, 2017 |
| 2017 | Industrial Training Supervisor for Lum Ji Hei, China State Construction Engineering (M) Sdn Bhd, 2017 |
| 2017 | Industrial Training Supervisor for Mohamad Shaffiee Bin Kamaludin, Jana Dcs Sdn Bhd, 2017 |
| 2017 | Industrial Training Supervisor for Saiful Azri Bin Rahamat, Uem Sunrise Berhad, 2017 |
| 2017 | Industrial Training Supervisor for Siti Khairunnisa Binti Abdul Kadir, Ime Technology (Johor) Sdn Bhd, 2017 |
| 2017 | Main Supervisor for Khairani Binti Nasir, PhD, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Main Supervisor for Najwa Wajihah Bt Mohd Rusli, MSc, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Main Supervisor for Siti Nor Hawanis Binti Husain, MSc, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Amy Hii Bing Bing, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Amy Hii Bing Bing, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Anis Jazira Binti Jalil, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Anis Jazira Binti Jalil, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Loo Zhin Howe, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Loo Zhin Howe, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Siti Nor Hafiza Binti Mohamad, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Siti Nor Hafiza Binti Mohamad, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Tan Hui Voon, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2017 | Supervisor for Tan Hui Voon, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017 |
| 2016 | Co-supervisor for Nurul 'Aisyah Binti Fadhlul Hadi, MSc, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Ahmad Syahmi Bin Roslan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Annizar Bin Mohd Johari, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Cheah Dong Wah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Mohd Azim Bin Norman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Mohd Irham Bin Anas, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Muhammad Hafiz Bin Radzali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Muhammad Nadhir Bin Abd Hamid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Nur Rizwan Bin Mohd Said, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Nurasyikin Binti Salleh Hodin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Nurul Amira Binti Nazri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Siti Muslihah Binti Yunus, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Examiner for Syamsiah Binti Mohd Shah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Industrial Training Supervisor for Anas Rizman Bin Ahmad Sabri, Inari Technology Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Jessy Teo, Vitrox Corporation Berhad, 2016 |
| 2016 | Industrial Training Supervisor for Lyana Afifi Binti Ahmad Kamry, Penfabric Sdn. Berhad, 2016 |
| 2016 | Industrial Training Supervisor for Muhammad Syukri Bin Johari, Kumpulam Ikram Sdn. Bhd., 2016 |
| 2016 | Industrial Training Supervisor for Muhammad Zulfaqar Bin Razali, Esmo Automation (M) Sdn. Bhd., 2016 |
| 2016 | Industrial Training Supervisor for Najwa Wajihah Binti Mohd Rusli, Mapa Gloves Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Noor Adila Binti Rohim, Penfabric Sdn. Berhad, 2016 |
| 2016 | Industrial Training Supervisor for Nur Rashyidah Binti Kemat, Mapa Gloves Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Ooi Ping Yi, Sophic Automation Sdn. Bhd., 2016 |
| 2016 | Industrial Training Supervisor for Pauline Wong Li Ya, Builtech Project Management Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Sim Ee, Tt Vision Technologies Sdn Bhd, 2016 |
| 2016 | Industrial Training Supervisor for Siti Nornatasa Yasina Binti Sa'Im, Penfabric Sdn. Berhad, 2016 |
| 2016 | Industrial Training Supervisor for Siti Norsyamimi Binti Ab Hamid, Penfabric Sdn. Berhad, 2016 |
| 2016 | Industrial Training Supervisor for Siti Nur Atifah Binti Ab Aziz, Penfabric Sdn. Berhad, 2016 |
| 2016 | Supervisor for Jawahir Binti Mohd Nor, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Mohamad Ali Ridho Bin Khairul Anuar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Nur Aiman Bin Abdul Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Nur Alyiani Binti Zulkifli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Ramizah Binti A Rahman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
| 2016 | Supervisor for Syahirah Binti Hamdan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016 |
EXTENSION & PUBLIC SERVICES
| Year | Description | Level |
|---|---|---|
| 2025 - 2026 | Module Developer for PANEL PEMBANGUNAN MODUL KURSUS LATIHAN PROFESIONAL BIDANG IoT DAN PERANTI PAPAN MUKA, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2025, March 2025 - February 2026 | National |
| 2025 | Chairperson of VIVA for PENGERUSI VIVA PHD - MOHD ARAFAT, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2025, June 2025 | University |
| 2025 | Member for PENASIHAT PROGRAM SIREH INNOVATION COMPETITION 2025, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, September 2025, September 2025 | National |
| 2024 | Head for Program KTP: High Impact Early Career Development bersama SM Sains Muar, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2024, August 2024 | University |
| 2024 - 2025 | Task Force for PROGRAM BILT WORKSHOP - UNESCO UNEVOC, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2024, November 2024 - October 2025 | University |
| 2023 | Speaker for PENCERAMAH KURSUS RESEARCH GRANT OPPORTUNITY, POLITEKNIK TUN SYED NASIR SYED ISMAIL, Malaysia, August 2023, August 2023 | National |
| 2023 | Head for MAJLIS MENANDATANGANI MOU ANTARA TDA & KPT DAN MAJLIS PELANCARAN MAKMAL-MAKMAL DI BAWAH INISIATIF KCP, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, August 2023, August 2023 | National |
| 2023 | Committee Member for AJK KECIL ANUGERAH KHAS (IJAZAH KEHORMAT) SEMPENA ISTIADAT KONVO UTHM KALI KE-23, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, November 2023, November - December 2023 | University |
| 2023 | Keynote Speaker for PERASMI MAJLIS GRADUASI SMK LENGA. MUAR, SMK LENGA, MUAR, Malaysia, December 2023, December 2023 | District |
| 2023 | Keynote Speaker for PERASMI MESYUARAT AGONG PIBG KALI KE-41 TAHUN 2023, SK PARIT KEROMA DARAT, MUAR, JOHOR, Malaysia, June 2023, June 2023 | District |
| 2023 | for PROGRAM INOVASI SAINS SM SAINS MUAR, SM SAINS MUAR, Malaysia, September 2023, September - December 2023 | National |
| 2023 | Head for i-RITEC2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2023, June - September 2023 | International |
| 2023 | Committee Member for MECHYTECH DAY 2023, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2023, March - June 2023 | International |
| 2022 | Head for KETUA PEMURNIAN 6 KURSUS BNM32403 BAGI PROGRAM BNM, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2022, January - December 2022 | University |
| 2022 - 2023 | Member for AHLI TASK FORCE PEMBINAAN MODUL SANGGAR KERJA, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, June 2022, June 2022 - May 2023 | University |
| 2022 | Speaker for MTMA Certificate in Apparel Standard Value Costing, Malaysian Textile Manufacturers Association, Malaysia, March 2022, March 2022 | National |
| 2022 - 2024 | Member for JAWATANKUASA STANDARD KEBANGSAAN BERKENAAN TEKSTIL DAN PAKAIAN, JABATAN STANDARD MALAYSIA, KEMENTERIAN PELABURAN, PERDAGANGAN DAN INDUSTRI, Malaysia, January 2022, January 2022 - December 2024 | National |
| 2021 | Deputy Chairman for Research & Innovative Technology Competition (RITEC 2021), Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, January 2021, January - December 2021 | National |
| 2021 - 2023 | Industrial Adviser for Member of Industry Expert Committee (IEC), Human Resources Development Corporation (HRD Corp), Human Resource Development Corporation (HRD Corp), Malaysia, October 2021, October 2021 - October 2023 | National |
| 2019 - 2024 | Member for AHLI TETAP BG KUMPULAN KERJA BERKAITAN SEMAKAN SEMULA MS 1192 GLOSSARY OF TEXTILE TERMS, JABATAN STANDARD MALAYSIA, KEMENTERIAN PELABURAN, PERDAGANGAN DAN INDUSTRI, Malaysia, July 2019, July 2019 - December 2024 | National |
| 2018 - 2020 | Deputy Chairman for Engineering Technology International Conference 2020, Universiti Tun Hussein Onn Malaysia (UTHM), Malaysia, March 2018, March 2018 - December 2020 | International |
TALENT DEVELOPMENT COURSES
| Year | Description | Organiser |
|---|---|---|
| 2026 | PEMBENTANGAN PROJEK BAGI PROGRAM KEPIMPINAN EKSEKUTIF - HIGH PERFORMANCE TVET LEADERSHIP (HIPER) KOHOT 4 TAHUN 2026: LAB 1 | BPKPK,UTHM |
| 2025 | KURSUS FUNDAMENTALS OF FINANCE AND ACCOUNTING FOR UTHM LEADERSHIP AND TOP MANAGEMENT | UTHM |
| 2024 | PROGRAM PEMERKASAAN KE ARAH PENGUKUHAN MINDA DAN KEMAHIRAN PEMIMPIN DI INSTITUSI PENDIDIKAN TINGGI | AKEPT |
| 2024 | UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (FINANCE FOR NON FINANCE MANAGERS) | UTHM |
| 2023 | UTHM HIGH IMPACT LEADERSHIP PROGRAMME (HILEAD) TAHUN 2023 - CHANGE LEADERSHIP FOR GTU LEADERS | UTHM |
| 2023 | UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (LEADING WITH INTEGRITY AND ETHICS) | UTHM |
| 2023 | UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (PENGURUSAN SUMBER MANUSIA) | UTHM |
| 2023 | UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (STAKEHOLDER ENGAGEMENT : CHANGES IN PRACTICE AND POWER) | UTHM |
| 2023 | UTHM LEADERSHIP DEVELOPMENT PROGRAMME - ULEAD (THE RISE AND FALL OF STRATEGIC PLANNING) | UTHM |
COURSES & TRAINING
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2026 | PROGRAM SANGGAR LESTARI SIRI 5/2026 UTHM / PASIFIC REGENCY BEACH RESORT, PORT DICKSON | 11/09/2026 - 13/09/2026 |
| 2026 | KURSUS PENGURUSAN BAHAN KIMIA & SISA BERJADUAL UTHM / Dewan Kuliah 1, Blok A | 10/09/2026 |
| 2026 | PIT STOP UTHM - SIRI 4 UTHM / Google Meet | 06/08/2026 |
| 2026 | PIT STOP UTHM - SIRI 3 UTHM / Google Meet | 30/07/2026 |
| 2026 | KURSUS MEDIA, KOMUNIKASI & PENJENAMAAN ORGANISASI SESI 1 UTHM / DEWAN KULIAH 1, BLOK A1, UTHM KAMPUS CAWANGAN PAGOH | 15/07/2026 |
| 2026 | KURSUS MEDIA, KOMUNIKASI & PENJENAMAAN ORGANISASI UTHM / MAKMAL GRAFIK DAN ANIMASI, BLOK J, UTHM KAMPUS CAWANGAN PAGOH | 14/07/2026 |
| 2026 | KURSUS INSANI ( INTEGRITI, SAHSIAH DAN NILAI ) PEJABAT PENDAFTAR,UTHM / BILIK LATIHAN SERI TERATAI | 02/07/2026 |
| 2026 | SEMINAR SAINTIFIK: KELUARGA DAN PEMBANGUNAN UMMAH DALAM PERSPEKTIF ISLAM UTHM / Pusat Konvensyen Hab Pendidikan Tinggi Pagoh / Youtube Live | 14/05/2026 |
| 2026 | PEMBENTANGAN PROJEK BAGI PROGRAM KEPIMPINAN EKSEKUTIF - HIGH PERFORMANCE TVET LEADERSHIP (HIPER) KOHOT 4 TAHUN 2026: LAB 1 BPKPK,UTHM / HOTEL DORSETT, PUTRAJAYA | 07/04/2026 - 09/04/2026 |
| 2026 | KURSUS BAGI PANEL PENILAI GERAN PENYELIDIKAN EKSPLORATORI DAN TRANSFORMATIF (GET) TAHUN 2026 UTHM / ONLINE | 18/03/2026 |
| 2026 | PROGRAM ZIARAH KASIH RAMADAN ASNAF KAMPUNG PAYA REDAN UTHM / MASJID KG PAYA REDAN | 17/03/2026 |
| 2026 | PROGRAM BERSAMA YANG MENJALANKAN FUNGSI PROVOST SUKUAN PERTAMA 2026 - PERHIMPUNAN WARGA UTHM KAMPUS CAWANGAN PAGOH UTHM / DEWAN A9, KKKP | 16/03/2026 |
| 2026 | MAJLIS KHATAM AL QURAN & IFTAR PERDANA PERINGKAT UTHM-KAMPUS CAWAGAN PAGOH UTHM / MUSOLLA KOLEJ KEDIAMAN KAMPUS PAGOH | 13/03/2026 |
| 2026 | BENGKEL PENYEDIAAN PELAN TINDAKAN KELESTARIAN KEWANGAN UNIVERSITI TUN HUSSIEN ONN MALAYSIA UTHM / DEWAN JAMUAN, ARAS 5, PTTA | 23/02/2026 |
| 2026 | BENGKEL STRATEGIK - STRATEGIC WORSKHOP 01 (INTERNATIONALISATION & STRUCTURED-LEARNING EXPERIENCE) UTHM / BILIK PBL - 3, KAMPUS CAWANGAN PAGOH | 11/02/2026 |
| 2026 | PROGRAM LIBAT URUS & REFLEKSI STAF (PPM-KCP) BERSAMA PENGARAH PPM BIL.1/2026 UTHM / BILIK MESYUARAT 1, UTHM PAGOH | 06/02/2026 |
| 2026 | PROGRAM SANGGAR LESTARI EKSEKUTIF : TOGETHER WE LEAD PEJABAT PENDAFTAR,UTHM / VILLEA PORT DICKSON | 16/01/2026 - 18/01/2026 |
| 2025 | INTERVENSI BERSEPADU & PRESTASI TAHUNAN UTHM / RUANG LEGAR, ARAS 1, BLOK A1, UTHM KAMPUS CAWANGAN PAGOH | 03/12/2025 |
| 2025 | KURSUS FUNDAMENTALS OF FINANCE AND ACCOUNTING FOR UTHM LEADERSHIP AND TOP MANAGEMENT UTHM / INTAN KAMPUS WILAYAH SELATAN (IKWAS) | 25/11/2025 - 26/11/2025 |
| 2025 | MAJLIS SYARAHAN PERDANA SIRI 2 2025 UTHM / PUSAT KONVENSYEN, HAB PENDIDIKAN TINGGI PAGOH | 21/11/2025 |
| 2025 | 4TH INTERNATIONAL RESEARCH & INNOVATIVE TECHNOLOGY COMPETITION & CONFERENCE (I-RITEC 2025) UTHM / Secara dalam talian | 23/10/2025 |
| 2025 | MAJLIS PERTUKARAN MEMORANDUM PERSEFAHAMAN (MOU) DAN MEMORANDUM PERJANJIAN (MOA) FAKULTI TEKNOLOGI KEJURUTERAAN BAGI TAHUN 2025 SERTA MAJLIS PERASMIAN EXECUTIVE LOUNGE & FTK MART UTHM / Bilik Mesyuarat 1 & Aras 4, Blok A, UTHM Kampus Cawangan Pagoh dan Pusat Konvensyen, Hab Pendidikan Tinggi Pagoh (HPTP) | 14/10/2025 |
| 2025 | SESI PERTEMUAN PENGERUSI LEMBAGA PENGARAH UNIVERSITI BERSAMA STAF DI FAKULTI TEKNOLOGI KEJURUTERAAN BAGI TAHUN 2025 UTHM / Bilik Mesyuarat 1, Aras 1, Blok A1 UTHM ? Kampus Cawangan Pagoh | 14/10/2025 |
| 2025 | PROGRAM BICARA TADBIR URUS DAN INTEGRITI UTHM / Dewan Jemaah, Aras 5, Perpustakaan Tunku Tun Aminah | 22/09/2025 |
| 2025 | PROGRAM PESTA LARIAN 68 MERDEKA UTHM / UNIVERSITI TUN HUSSEIN ON MALAYSIA KAMPUS CAWANGAN PAGOH | 12/09/2025 |
| 2025 | SESI LIBAT URUS KUMPULAN FOKUS - PEMBANGUNAN FIZIKAL UTHM - KAMPUS CAWANGAN PAGOH UTHM / BILIK MESYUARAT 1, ARAS 1, BLOK A1, UTHM - KAMPUS CAWANGAN PAGOH | 25/08/2025 |
| 2025 | KURSUS PENGURUSAN RISIKO HAZARD DI TEMPAT KERJA (HIRARC) DAN PEMERIKSAAN TEMPAT KERJA (PTK) UTHM / UTHM KAMPUS PAGOH | 13/08/2025 - 14/08/2025 |
| 2025 | KURSUS CREATING LEARNING EXPERIENCES THROUGH VIDEO SIMULATIONS IN THE LAB UTHM / Bilik Mesyuarat 1, Blok A, UTHM Kampus Pagoh | 12/08/2025 |
| 2025 | SUKAN PIALA PENGARAH PEJABAT PENGURUSAN MAKMAL KAMPUS CAWANGAN PAGOH TAHUN 2025 UTHM / EDU HUB PENDIDIKAN UTHM KAMPUS CAWANGAN PAGOH | 04/08/2025 - 05/08/2025 |
| 2025 | LATIHAN PENGENDALIAN BAHAN KIMIA DAN PERSEDIAAN PENILAIAN CHRA, PEJABAT PENGURUSAN MAKMAL UTHM PAGOH UTHM / Bilik Seminar 2, UTHM Pagoh | 23/07/2025 - 24/07/2025 |
| 2025 | PENYELIAAN DAN PENILAIAN PELAJAR PASCASISWAZAH : PENDEKATAN HOLISTIK DAN BERKESAN PUSAT PENGAJIAN SISWAZAH,UTHM / DEWAN KULIAH A, BLOK G3 | 10/03/2025 |
| 2025 | TAZKIRAH 'MEMAHAMI FENOMENA ALAM HARI KIAMAT DAN AKHIRAT (BERDASARKAN AL-QURAN) DARI PERSPEKTIF ASTRONOMI DAN ASTROFIZIK' UTHM / BILIK MESYUARAT 1, UTHM - KAMPUS CAWANGAN PAGOH | 07/03/2025 |
| 2025 | PROGRAM BACAAN AL-QURAN DI UTHM KAMPUS PAGOH TAHUN 2025 (JUZUK 5) UTHM / PEJABAT PENTADBIRAN, UTHMKCP | 06/03/2025 |
| 2025 | BENGKEL SINERGI KERJASAMA STRATEGIK UTHM UTHM / CRYSTAL CROWN HOTEL, JOHOR BAHRU, JOHOR | 21/02/2025 - 23/02/2025 |
| 2025 | TAKLIMAT PEMAKLUMAN PEMAKAIAN SYARAT LULUS KURSUS MENGIKUT KOMPONEN UTHM / Dewan Peperiksaan F2 Bawah | 22/01/2025 |
INTELLECTUAL PROPERTY
| ID IP | TITTLE PRODUCT | TYPE OF IP | NO. APPLICATION | ROLE |
|---|---|---|---|---|
| PT247 | A Method of Producing A Mosquito-Repellent Textile Using Biodegradable Microcapsules | Paten (Patent) | PI 2026002229 | PEREKA CIPTA/PENYELIDIK BERSAMA |
| CP1355 | OPTIMIZATION OF MICROENCAPSULATION CONDITIONS OF LEMONGRASS ESSENTIAL OIL USING COMPLEX COACERVATION METHOD | Hak Cipta (Copyright) | LY2024M03402 | PEREKA CIPTA/PENYELIDIK BERSAMA |
| CP1211 | BAMBOO-POLYESTER NONWOVEN BLANKET FILL | Hak Cipta (Copyright) | LY2022M04175 | PEMILIK/PENYELIDIK UTAMA |
| PT123 | A Protective Panel | Paten (Patent) | PI2015002779 | PEMILIK/PENYELIDIK UTAMA |
EXHIBITION
| EXHIBITION ID | PRODUCT TITTLE | EXPO NAME | RECOGNITION |
|---|---|---|---|
| 16SIIF06 | Nutri Planter - Biodegradable Nursery Seed Pot | SIIF 2016 | Gangsa dan Setara |
| 16SIIF10 | TexCo Ballistic ? Resistance Panel | SIIF 2016 | Gangsa dan Setara |
| 16SIIF04 | Lightweight Concrete Containing Expanded Polystrene Beads (EPS) and Palm Oil Fue | SIIF 2016 | Perak dan Setara |
| 16ITEX21 | TexCO Panel | ITEX 2016 | Perak dan Setara |
| 15CIPTA02 | Co-KEV protective panel | PECIPTA 2015 | Emas dan Setara |
ENDOWMENT
| TAHUN | ENDOWMEN | PERANAN | NILAI |
|---|---|---|---|
| Sumbangan Manual Hyraulic Press Machine dan Electronic Yarn Count | KETUA | 0.00 |
AWARD
| TAHUN | NAMA ANUGERAH / PENCAPAIAN | PENGANUGERAH | PERINGKAT |
|---|---|---|---|
| 2024 | ANUGERAH TAAT SETIA (ATS) | UTHM | UNIVERSITI |
| 2022 | Top 10 UTHM Researchers (International Grant) HADIAH UTAMA | RMC UTHM | UNIVERSITI |
| 2019 | ANUGERAH PERKHIDMATAN CEMERLANG | UTHM | UNIVERSITI |
| 2015 | GOLD CO-KEV PROTECTIVE PANEL GOLD | MHE | NEGERI |
| 2014 | ANUGERAH JASA BAKTI | UTHM | UNIVERSITI |