Staff Profile

Full NameDr. FAZIMAH BINTI MAT NOOR
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN MEKANIK (JKM)
Email
Designation DS52 - PENSYARAH KANAN

Field of Expertise

Field Category (KPT) APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES
Field (KPT) Other Applied Sciences, Engineering and Technologies n.e.c.
Field of Specialization (KPT) Other Applied Sciences, Engineering and Technologies n.e.c.

Areas of Research Interest

1. materials engineering, biomedical implants, porous materials, intermetallics materials, mechanical engineering

Academic Qualification

YearQualificationInstitution
2018 DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL UNIVERSITI TEKNOLOGI MALAYSIA
2009 SARJANA KEJURUTERAAN MEKANIKAL UNIVERSITI TUN HUSSEIN ONN MALAYSIA
2003 SARJANA MUDA KEJURUTERAAN MEKANIKAL KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN
1998 SC/MCE/SPM/SPVM SEK MEN SAINS POKOK SENA

Professional Appointments

DS52 - Pensyarah Kanan

Professional Societies

YearDescriptionRoleLevel
04/09/2017 - 31/12/9999 International Association of Engineers (IAENG)
Ahli Antarabangsa
20/01/2012 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2018 Engineering Laboratory 2 [BDA27301], sesi 20172018 semester 2, Universiti Tun Hussein Onn Malaysia University
2018 Solid Mechanics 1 [BDA10903], Sesi 20172018 semester 2, Universiti Tun Hussein Onn Malaysia University
2018 Dynamics [BDA20103], sesi 20182019 semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Statics [BDA10203], Sesi 20182019 semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2017 engineering laboratory 2 [BDA2730], sesi 20172018 semester 1, Universiti Tun Hussein Malaysia, 2017 University
2017 Solid Mechanics 1 [BDA10903], sesi 20172018 semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Engineering Drawing [BNR25703], sesi 2016/2017 semester 2, Universiti Tun Hussein Onn Malaysia University
2010 Solid Mechanics II [BDA3033], Sesi 20092010 Semester 2, Univerisiti Tun Hussein Onn Malaysia, 2010 University
2010 Engineering Laboratory III [DDA3711], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Statics [DDA1013], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2009 Engineering Laboratory IV [BDA2721], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Engineering Laboratory II [DDA2721], Sesi 20082009 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Engineering Laboratory V [BDA3071], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Solid Mechanics [DDA2073], Sesi 20082009 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Solid Mechanics 1 [BDA1042], Sesi 20082009 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Solid Mechanics [DDA 2073], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Statics [BDA1023], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2008 Statics [DDA1013], Sesi 20082009 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 University
2008 Statics [BDA1023], Sesi 20082009 Semester1, Universiti Tun Hussein Onn Malaysia, 2008 University
2008 Engineering Laboratory V [BDA3071], Sesi 20082009 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
H501 Program : Development of bio metallic foam for bone tissue engineering Projek : Fabrication of Stainless Steel foam with bio active ceramic addition using slurry method. Ahli 30/06/2021
H502 Program : Development of bio metallic foam for bone tissue engineering Projek : HA Coating of Stainless Steel Foam for Bone Tissue Applications Ahli 30/06/2021
H503 Program : Development of bio metallic foam for bone tissue engineering Projek : Biocompatibility of stainless steel foam coating with calcium phosphate for bone tissue engineering application Ahli 30/06/2021
H514 Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Extraction and crushing process of bamboo culm for bamboo fibre production Ahli 30/06/2021
K067 Effect of rice husk silica as reinforcement on physical and mechanical properties of recycled aluminium chip AA7075 Ahli 31/12/2020
H239 Utilizing Cockle Shell Waste as an Abrasive Particle for Toothpaste Application Ahli 30/06/2020
1596 A New Approach of Recycling Aluminium Alloy Chip (AA6061) Integrated With Particulate Silicon Carbide as an Alternative Metal Matrix Composite Material Ahli 31/07/2019
E028 An Investigation Of Stainless Steel (SS316L) And Cobalt Chromium (Cocr) Foam For Orthopaedics Application By Using Powder Metallurgy Routes Ahli 31/08/2015
0686 Computational Model of Neck and Spine of Human Body to Examine Injuries Ahli 31/01/2012
0265 Development Of Elemental Powder Metallurgy Route For Production Of Novel Nanostructured Feal Intermetallic For High Temperature Application Ahli 31/05/2010

Publications

Journal
Zaleha Mohamad, Al Emran Ismail, S. Mahzan, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Maznan Ismon, Mohd Amran Madlan
(2018) Classification For Damage Severity In Natural Fibre Composites Using Principal Component Analysis, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 147, ISSN:2229838X
Maznan Ismon, Ronnie Chai, Al Emran Ismail, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Zaleha Mohamad, Mohd Amran Madlan, Izzuddin Zaman
(2018) Thermal Gradient Pattern Of Shallow Pitting Via Active Thermography ? Hot Water And Steam., INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 138, ISSN:26007916
Ismon, M., Chai, R., Ismail, A.E., Zainulabidin, M.H., Noor, F.M., Wahab, H.A., Mohamad, Z., Madlan, M.A., Zaman, I.
(2018) Thermal Gradient Pattern Of Shallow Pitting Via Active Thermography-Water And Steam, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 138, ISSN:2229838X
Al Emran Ismail, Fazimah Mat Noor, Zaleha Mohamad, Mohd Amran Madlan, M. Zulafif Rahim, M. Rasidi Ibrahim, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan, Nik Hisyamudin Muhd Nor
(2017) Effect Of Triggering Angles On The Crushing Mechanisms Of Hybrid Woven Kenaf/Aluminum Hollow Cylinders, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 12, 012034, ISSN:17426588
Al Emran Ismail, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Maznan Ismon, Zaleha Mohamad, Mohd Amran Madlan
(2017) Interactions Of Double Slanted Cracks Under Mode I Modelling, APPLIED MECHANICS AND DYNAMICS, EDP Sciences, 2017 , 5, 1, ISSN:2261236X
Fazimah Mat Noor, Khairur Rijal Jamaludin and Sufizar Ahmad
(2017) Physical And Mechanical Characteristics Of Porous Ss316l For Biomedical Implant, SOLID STATE PHENOMENA, 2017 Trans Tech Publications, Switzerland , 10, 374, ISSN:16629779
Sufizar AHMAD , M. ROSLI , Nur Suliani ABDUL MANAF, Murni Faridah MAHAMMAD RAFTER, F. Mat NOR
(2016) The Formation Of Cobalt Chromium Molybdenum (Cocrmo) Foams Fabricated By Slurry Method , MATERIALS SCIENCE FORUM , Trans Tech Publications , 1, 197, ISSN:0255-5476
Prosiding / Seminar
F. Mat Noor, K. R. Jamaludin , and S. Ahmad
(2017) Fabrication Of Porous Stainless Steel 316l For Biomedical Applications, EDP SCIENCES , 1, ISBN:2261236X
Fazimah Mat NOOR, Khairur Rijal JAMALUDIN, Sufizar AHMAD
(2016) Production Of Stainless Steel 316l Foam With Different Solid Loading, Trans Tech Publications , 321 , ISBN:978-303835537-3
Fazimah Mat Noor, N. I. Mat Rosip, K. R. Jamaludin, S. Ahmad
(2015) Effects Of Sintering Temperature On The Properties Of Stainless Steel Foam, Trans Tech Publications, Switzerland , 232 , ISBN:1662-8985
N.I. Mad Rosip, S. Ahmad, K.R. Jamaludin, F. Mat Noor
(2014) Morphological Analysis Of Ss316l Foam Produced By Using Slurry Method, Trans Tech Publications, Switzerland , 68 , ISBN:1662-8985
F. Mat Noor, K. R. Jamaludin, S. Ahmad, R. Ibrahim, N. I. Mat Rosip
(2013) Development And Characterization Of Ss316l Foam Prepared By Powder Metallurgy Route, Trans Tech Publications, Switzerland , 31 , ISBN:978-303835038-5
F. M. Noor, M. I. M. Zain, K. R. Jamaludin, R. Hussin, Z. Kamdi, A. Ismail, S. Ahmad, H. Taib
(2013) Potassium Bromide As Space Holder For Titanium Foam Preparation, Trans Tech Publications, Switzerland , 922 , ISBN:978-303785933-9
N. I. Mad Rosip, S. Ahmad, N. L. Arpawi, K. R. Jamaluddin,F. Mat Noor
(2013) The Effect Of Sintering Temperature And Composition For Density And Porosity Of Ss316l Foam, Trans Tech Publications, Switzerland , 988 , ISBN:978-303785933-9

Consultancies

YearDescriptionLevel
2009 Development of Packaging Module for IKBN Temerloh New Programme, 2008-2009 National

Supervision

YearDescriptionRole
2018 Supervisor for Mohamad azmi bin Zainuddin, PSM, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2018 Supervisor for Ahmad Helmi Bin Ahmad Kushairi, PSM, UTHM, 2018 Supervisor
2018 Supervisor for Muhamad Iqbar Bin Abu Bakar, PSM, UTHM, 2018 Supervisor
2017 Supervisor for Izzat Afifi Bin Mohd Zain, PSM, UTHM, 2017 Supervisor
2017 Supervisor for Adam Malik B. Masu@Mansor, PSM, UTHM, 2017 Supervisor
2010 Supervisor for Nurul Aliaa Binti Mohd Adnan, Undergraduate, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Amir Zarif Bin Azmi, Undergraduate, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Muhamad Farid Bin Isa@ Zainal, Undergraduate, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor

Extension & Public Services

YearDescriptionLevel
2010 Water Rocket Competition: Collaboration with Pejabat Pendidikan Daerah Batu Pahat, 2010 University
2009 Water Rocket Competition: Collaboration with Pejabat Pendidikan Daerah Batu Pahat, 2009 University

« Back