Staff Profile
| Full Name | ENCIK HANIS BIN ZAKARIA |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN TENAGA DAN TERMOBENDALIR (JKT) |
| Designation | DV44 - JURUTERA PENGAJAR |
Field of Expertise
| Field Category (KPT) | MEDICAL AND HEALTH SCIENCES |
|---|---|
| Field (KPT) | Environmental and Occupational Health and Safety Research |
| Field of Specialization (KPT) | Health and Safety (Occupational) |
Areas of Research Interest
| 1. | Occupational Safety and Health |
| 2. | Plant Engineering |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2013 | SARJANA KEJURUTERAAN (MEKANIKAL) | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2008 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITI TEKNOLOGI MALAYSIA |
Professional Appointments
| DV44 - Jurutera Pengajar |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 11/12/2013 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2018 | Makmal Kejuruteraan IV [BDA 27501], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Termodinamik I [BDA 20703], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Makmal Kejuruteraan IV [BDA 27501], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Termodinamik I [BDA 20202], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Termodinamik I [BDA 20703], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Makmal Kejuruteraan V [BDA 37201], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2017 | Kejuruteraan Penyejukan dan Sistem Penyaman Udara [BDE 40103], Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Termodinamik I [BDA 20703], Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Makmal Kejuruteraan V [BDA 37201], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Makmal Kejuruteraan IV [BDA27501], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Termodinamik I [BDA 20703], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Makmal Kejuruteraan IV [BDA 27501], Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2016 | Makmal Kejuruteraan II [BDA27001], Sesi 20152016 Semester II, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Makmal Kejuruteraan IV [BDA27501], Sesi 20152016 Semester II, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Kejuruteraan Penyejukan dan Sistem Penyaman Udara [BDE40103], Sesi 20152016 Semester II, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Makmal Kejuruteraan IV [BDA27501], Sesi 20162017 Semester I, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Termodinamik I [BDA20703], Sesi 20162017 Semester I, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Makmal Kejuruteraan IV [BDA27501], Sesi 20152016 Semester II, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Termodinamik I [BDA20703], Sesi 20152016 Semester I, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Makmal Kejuruteraan IV [BDA27501], Sesi 20152016 Semester I, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | MakmaI Kejuruteraan II [BDA27001], Sesi 20152016 Semester I, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Makmal Kejuruteraan V [BDA37201], Sesi 20152016 Semester I, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Makmal Kejuruteraan II [BDA27001], Sesi 20142015 Semester II, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Makmal Kejuruteraan IV [BDA27201], Sesi 20142015 Semester II, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Makmal Kejuruteraan IV [BDA27501], Sesi 20142015 Semester II, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Termodinamik I [BDA20703], Sesi 20142015 Semester II, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2014 | Makmal Kejuruteraan IV [BDA27501], Sesi 20142015 Semester I, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Makmal Kejuruteraan IV [BDA27201], Sesi 20142015 Semester I, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Makmal Kejuruteraan II [BDA27001], Sesi 20142015 Semester I, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Makmal Kejuruteraan IV [BDA27501], Sesi 20132014 Semester II, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Makmal Kejuruteraan VI [BDA37101], Sesi 20132014 Semester II, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Makmal Kejuruteraan IV [BDA27201], Sesi 20132014 Semester II, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Termodinamik I [BDA20703], Sesi 20142015 Semester I, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Termodinamik I [BDA20703], Sesi 20132014 Semester II, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2013 | Makmal Kejuruteraan II [BDA2701], Sesi 20122013 Semester II, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Makmal Kejuruteraan IV [BDA27501], Sesi 20122013 Semester II, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Makmal Kejuruteraan V [BDA37001], Sesi 20122013 Semester II, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Makmal Kejuruteraan VI [BDA37101], Sesi 20122013 Semester II, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Makmal Kejuruteraan V [BDA37201], Sesi 20132014 Semester I, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Makmal Kejuruteraan IV [BDA27201], Sesi 20132014 Semester I, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2013 | Makmal Kejuruteraan VI [BDA37101], Sesi 20132014 Semester I, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2012 | Makmal Kejuruteraan VI [BDA37101], Sesi 20112012 Semester II, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Kejuruteraan Dandang [DAM26503], Sesi 20122013 Semester I, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Amalan Kejuruteraan III [BDA28001], Sesi 20122013 Semester I, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Makmal Kejuruteraan II [BDA27001], Sesi 20122013 Semester I, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Amalan Kejuruteraan III [BDA28001], Sesi 20112012 Semester II, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Makmal Kejuruteraan IV [BDA27201], Sesi 20112012 Semester II, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2011 | Amalan Kejuruteraan Loji II [DAM15103], Sesi 20102011 Semester II, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Amalan Teknologi Loji III [DAM26203], Sesi 20112012 Semester I, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Amalan Kejuruteraan III [BDA2801], Sesi 20112012 Semester I, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Kejuruteraan Dandang [DDF2043], Sesi 20102011 Semester II, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Amalan Kejuruteraan III [BDA28001], Sesi 20102011 Semester II, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Amalan Kejuruteraan Loji IV [DDF2023], Sesi 20102011 Semester II, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Makmal Kejuruteraan VI [BDA3711], Sesi 20112012 Semester I, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2010 | Amalan Kejuruteraan Loji IV [DDF2023], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Kejuruteraan Dandang [DDF2043], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Amalan Kejuruteraan Mekanikal [DDA1822}, Sesi 20092010 Semester Mei, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Amalan Kejuruteraan Mekanikal serta Loji [DDF2013], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Kejuruteraan Keselamatan [DDF2033], Sesi 20102011 Semester I, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Termodinamik Gunaan [DDF2073], Sesi 20102011 Semester I, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Amalan Kejuruteraan III [BDA2801], Sesi 20102011 Semester I, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Amalan Kejuruteraan Loji II [DDF1023], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Amalan Kejuruteraan Mekanikal III [BDA2801], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2009 | Makmal Kejuruteraan III [DDA3711], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia 2009 | University |
| 2009 | Makmal Kejuruteraan I [DDA2711], sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia | University |
| 2009 | Makmal Kejuruteraan VI [BDA3711], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
Research Grants And Contracts
Publications
| Book |
|---|
| Shahrin Hisham bin Amirnordin, Siti Mariam binti Basharie, Ahmad Fuad bin Idris, Mohamad Farid bin Sies, Hanis bin Zakaria, Md. Zin bin Ibrahim, Ahmad Daud bin Mohd Daim, Siti Mariam binti Basharie, Mohd Faizal bin Mohideen Batcha (2016) Bda 37201 Engineering Laboratory V, UTHM , 1, ISBN:03-0053 |
| Shahrin Hisham Aminordin, Siti Mariam Basharie, Ahmad Fuad Idris, Norrizal Mustaffa, Mohd Shukri Ansar, Md Zin Ibrahim, Ahmad Daud Mohd Daim, Mohd Faizal Mohideen Batcha, Mohamad Farid Sies, Hanis Zakaria (2016) Bda27501 Engineering Laboratory Iv, UTHM , 1, ISBN:03-0039 |
| Book Chapters |
| M. Farid Sies, Norrizal Mustaffa, Hanis Zakaria, Hamidon Salleh, B. Manshoor, Amir Khalid (2017) Development Of The Premixing Injector In Burner System, Experiments And Simulations Burner Combustion, UTHM , 65, ISBN:9789670764825 |
| Hanis Zakaria, Amir Khalid, Mohamad Farid Sies, Norrizal Mustaffa, Bukhari Manshoor (2017) Effect Of Storage Temperature And Storage Duration On Biodiesel Properties And Characteristics, Experiments And Simulations Burner Combustion, UTHM , 1, ISBN:9789670764825 |
| Amir Khalid, Norrizal Mustaffa, B. Manshoor, Hanis Zakaria, Ahmad Jais Alimin, Mutalib Leman, A. Sadikin (2017) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, Experiments And Simulations Burner Combustion, UTHM , 33, ISBN:9789670764825 |
| General Publications |
| HANIS BIN ZAKARIA (2018) Chemical Health Risk Assessment (Chra) Report Ftj Bio Power Sdn. Bhd., Pahang, Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| HANIS BIN ZAKARIA (2018) Chemical Health Risk Assessment (Chra) Report Lotus Desaru Beach And Spa Resort Sdn. Bhd., Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| HANIS BIN ZAKARIA (2018) Chemical Health Risk Assessment (Chra) Report, Eastray Fuirniture Construction Sdn. Bhd, Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| HANIS BIN ZAKARIA (2017) Chemical Health Risk Assessment (Chra) Report, Hydro Metal (M) Sdn Bhd, Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| Hanis bin Zakaria (2017) Chemical Health Risk Assessment Report Makmal Kejuruteraan Persekitaran, Fakulti Kejuruteraan Awam Dan Alam Sekitar, Uthm, Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| Hanis bin Zakaria (2016) Chemical Health Risk Assessment (Chra) Report, Fuji Smbe Manufacturing Sdn. Bhd., Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| Hanis bin Zakaria (2016) Chemical Health Risk Assessment (Chra) Report, Jabatan Kesihatan, Majlis Bandaraya Johor Bharu (Mbjb), Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| Hanis bin Zakaria (2016) Chemical Health Risk Assessment (Chra) Report, Yeh Brothers Electronic Works (M) Sdn. Bhd., Jabatan Keselamatan dan Kesihatan Pekerjaan , 1, ISBN:- |
| Journal |
| A. Syakir M. Jamil, Norzelawati Asmuin, M.Farid Sies, N.A. Nor Salim, Fakhrulrazi, Hanis Zakaria, Rasidi Pairan (2017) A Study Of Recirculation System From Water Loss In Kitchen Hood: Grease Emission Filtration Efficiency Using Strainer, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET) , IJET , 1, 2500, ISSN:23198613 |
| N. A. Nor Salim, Norzelawati Asmuin, M. A. Ahnaf Muslim, M. Farid Sies, A. Syakir M.Jamil, M. R. Pairan (2017) A Study Of Water-Mist Recirculation System From Scale Kitchen Hood Ventilation, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), International Journal of Engineering and Technology (IJET) , 1, 2508, ISSN:23198613 |
| M F Sies, N F Madzlan, N Asmuin, A Sadikin and H Zakaria (2017) Determine Spray Droplets On Water Sensitive Paper (Wsp) For Low Pressure Deflector Nozzle Using Image J , IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 7, 1, ISSN:1757899X |
| M.Farid Sies, Norzelawati Asmuin, Fakhrulrazi, N.A. Norsalim, Hanis Zakaria, Rasidi Pairan, Azmahani Sadikin (2016) Determine Physical Properties Of An Organic Citric Acid (Processed Lime Juice) Dissolve With Water Using Experimental Apparatus , INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, IJET , 12, 2530, ISSN:09754024 |
| Hanis Zakaria, Norzelawati Asmuin, Muhamad Nurmizan Ahmad, Norhalim Hassan, Mohamad Farid Sies (2016) Dust Monitoring Exposure: Abrasive Blasting Process, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), Engg Journals Publications , 12, 2537, ISSN:23198613 |
| Hanis Zakaria, Amir Khalid, Mohamad Farid Sies, Norrizal Mustaffa, Bukhari Manshoor (2014) Effect Of Storage Temperature And Storage Duration On Biodiesel Properties And Characteristics, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 12, 316, ISSN:16609336 |
| Hanis Zakaria, Amir Khalid, Mohamad Farid Sies, Norrizal Mustaffa (2014) Overview Effect Of Biodiesel Storage On Properties And Characteristics, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 12, 260, ISSN:16609336 |
| Amir Khalid, Norrizal Mustaffa, B. Manshoor, Hanis Zakaria, Ahmad Jais Alimin, Mutalib Leman, A. Sadikin (2013) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, APPLIED MECHANICS & MATERIALS, Trans Tech Publications , 12, 161, ISSN:16627482 |
| Prosiding / Seminar |
| Amir Khalid,Norazwan Azman, Hanis Zakaria, B. Manshoor, Izzuddin Zaman, Azwan Sapit, Mutalib Leman (2014) Effects Of Storage Duration On Biodiesel Properties Derived From Waste Cooking Oil, TRANS TECH PUBLICATIONS, SWITZERLAND , 494, ISBN:16609336 |
| Norrizal Mustaffa, Amir Khalid, M. Farid Sies, Hanis Zakaria, B. Manshoor (2014) Preheated Biodiesel Derived From Vegetable Oil On Performance And Emissions Of Diesel Engines A Review, TRANS TECH PUBLICATIONS, SWITZERLAND , 285, ISBN:9789672110934 |
| Khalid, A., Mustaffa, N., Manshoor, B., Zakaria, H., Alimin, A.J., Leman, A.M., Sadikin, A. (2014) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, Trans Tech Publication , 161, ISBN:978-303785933-9 |
| Hanis Bin Zakaria (2011) Drying Of Oil Palm Frond Via Swirling Fluidization Technique |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2018 | Speaker for International Symposium on Occupational Safety and Health at Work (ISOSH) 2018, UTHM , 2018 | International |
| 2018 | Speaker for Program Keselamatan & Kesihatan Pekerjaan UTHM : Kursus Asas Higien Industri & Ergonomik, OSHE UTHM, 2018 | University |
| 2018 | Editor for Jurnal Terbitan Khas UTHM, Penerbit UTHM, 2018 | University |
| 2018 | Deputy Director for International Symposium on Occupational Safety and Health at Work (ISOSH) 2018, UTHM Commercial Sdn. Bhd., 2018 | International |
| 2018 | Member of Systematic Occupational Health Enhancement Level Program (SoHELP), Department of Occupational Safety and Health (DOSH) Johor, 2018 | Government |
| 2017 | Chemical Health Risk Assessment (CHRA) Makmal Kejuruteraan Air Sisa, FKAAS, UTHM Commercial Sdn. Bhd., 2017 | Private |
| 2017 | Kursus Boilerman, UTHM Commercial Sdn. Bhd., 2017 | University |
| 2017 | Reviewer for International Conference onn Computational Fluid Dynamics in Research and Industry (CFDRI) 2017, Songkhla, Thailand, 2017 | International |
| 2017 | Auditor for Audit Dalaman Keselamatan dan Kesihatan Pekerjaan UTHM, 2017 - 2019 | University |
| 2016 | Reviewer for 7th International Conference on Mechanical and Manufacturing Engineering (ICME), Jogjakarta, Indonesia, 2016 | International |
| 2016 | Chemical Health Risk Assessment for Compliance to Occupational Safety and Health (Use and Standard of Exposure to Chemical Hazardousto Health) Regulations 2000, Makmal Kejuruteraan Persekitaran, FKAAS, UTHM | University |
| 2016 | CHRA for Compliance to Occupational Safety and Health (Use and Standard of Exposure of Chemical Hazardous to Health) Regulations 2000, UTHM Commercial Sdn. Bhd., 2016 | Private |
| 2016 | Chemical Health Risk Assessment (CHRA) Makmal Kejuruteraan Persekitaran, FKAAS, UTHM Commercial Sdn. Bhd., 2016 | Private |
| 2016 | Bengkel Penaksiran Risiko kepada Kesihatan Secara Ringkas (SiRAC) bersama Pengapit, Jabatan Keselamatan dan Kesihatan Pekerjaan Malaysia, Kementerian Sumber Manusia, 2016 | National |
| 2013 | Projek Penyediaan Fasiliti Latihan Industri Petroleum Iraq, UTHM Holdings, 2013 | University |
| 2012 | Program Permulaan Graduan Semester II 20112012, Pusat Kaunseling dan Pembangunan Pelajar, 2012 | University |
| 2012 | Program Permulaan Graduan Semester I 20122013, Pusat Kaunseling dan Pembangunan Pelajar, 2012 | University |
| 2012 | Pembangunan Program Teknologi (Program Automotif), Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Projek Latihan Pra Penempatan Tenaga Pengajar KKTM Kemaman, UTHM Holdings dan MARA, 2012 | Government |
| 2011 | Industrial Skill Enhancement Program (INSEP) Kejuruteraan Perpaipan bagi Loji Pemprosesan, Pusat Pendidikan Berterusan dan Kementerian Kewangan, 2011 | Government |
| 2011 | Program Permulaan Graduan Semester II 20102011, Pusat Kaunseling dan Pembangunan Pelajar, 2011 | University |
| 2011 | Program Permulaan Graduan Semester I 20112012, Pusat Kaunseling dan Pembangunan Pelajar, 2011 | University |
| 2011 | Pembangunan Program Teknologi (Program Loji), Universiti Tun Hussein Onn Malaysia, 2011 - 2012 | University |
| 2011 | Penyediaan Peraturan Keselamatan Makmal dan Bengkel UTHM, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2010 | Industrial Skill Enhancement Program (INSEP) Kejuruteraan Perpaipan bagi Loji Pemprosesan, Pusat Pendidikan Berterusan dan Kementerian Kewangan Malaysia, 2010 | Government |
| 2010 | Pembangunan Loji Pandu Biodiesel FKMP, Universiti Tun Hussein Onn Malaysia, 2011 - 2012 | University |
| 2010 | Industrial Skill Enhancement Program (INSEP) Pengurusan Operasi Industri, Pusat Pendidikan Berterusan dan Kementerian Kewangan Malaysia, 2010 | Government |
| 2009 | Industrial Skill Enhancement Program (INSEP) Kejuruteraan Perpaipan bagi Loji Pemprosesan, Pusat Pendidikan Berterusan dan Kementerian Kewangan Malaysia, 2009 | Government |
Supervision
| Year | Description | Role |
|---|---|---|
| 2019 | Supervisor for Mohamad Hairulnisham bin Buang, B. Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Muhammad Faris bin Fauzy, B. Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Mohamad Khairul Hafiz bin Mohd Katman, B. Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Nurfarah Ilyani binti Mohammad Sohaimi, B. Eng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Muhammad Hilmi bin Raziffudin, B. Eng, UTHM, 2018 | Supervisor |
| 2017 | Supervisor for Hadirah binti Bahauddin, B. Eng, Universiti Tun Hussein Onn Malaysia, 2017 | Supervisor |
| 2017 | Supervisor for Aizat Syahmi bin Zainal, B. Eng, Universiti Tun Hussein Onn Malaysia, 2017 | Supervisor |
| 2017 | Supervisor for Mohd Rafizi bin Yaacob, B. Eng, Universiti Tun Hussein Onn Malaysia, 2017 | Supervisor |
| 2017 | Supervisor for Muhammad Iqbal bin Mohd Ghazali, B. Eng, Universiti Tun Hussein Onn Malaysia, 2017 | Supervisor |
| 2017 | Supervisor for Muhammad Izham bin Othman, B. Eng, Universiti Tun Hussein Onn Malaysia, 2017 | Supervisor |
| 2016 | Supervisor for Noor Farzee binti Paimin, B. Eng, Universiti Tun Hussein Onn Malaysia, 2016 | Supervisor |
| 2016 | Supervisor for Muhamad Nurmizan Ahmad, B. Eng, Universiti Tun Hussein Onn Malaysia, 2016 | Supervisor |
| 2015 | Supervisor for Muhammad Syahmi Anat bin Mustafa, B. Sc, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Muhamad Helmi bin Ramli Kamaruddin, B. Sc, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Mohd Syafiq bin Miron, B. Sc, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Nurmina Abdullah, B. Sc, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Muhammad Ramadhan bin Rosidi, B. Sc, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2013 | Supervisor for Muhammad Zariq Imran bin Abdul Manap, Dipl., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Supervisor for Muhammad Nazirul 'Adlie bin Abdul Latib, Dipl., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Supervisor for Mohamad Alif bin Sukaimi, Dipl., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Supervisor for Amirin Sofi bin Rahaimay, Dipl., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohd Syukri bin Mohd Nordin, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohammad Naim bin Abdul Samat, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Ang Ching yoong, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohd Amaluddin bin Boimin, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohamad Zulhelmi bin Ramli, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohammad Shukri Al-Amin bin Abdul Kadir, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Muhammad Norazwan bin Azman, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Saiyedah Afzan binti Basir, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohd Khardani bin Md Khozaini, B.Sc., Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Penyelia Latihan Industri Sarjana Muda Semester III 20122013, Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2011 | Penyelia Latihan Industri Sarjana Muda Semester II 20102011, Universiti Tun Hussein Onn Malaysia, 2011 | Supervisor |
| 2011 | Panel Simposium Latihan Industri Semester II 20102011 | Assessor |
| 2011 | Penyelia Latihan Industri Sarjana Muda Semester III 20102011, Universiti Tun Hussein Onn Malaysia, 2011 | Supervisor |
| 2010 | Panel Juri Pameran Projek Akhir INSEP 2010 | Assessor |
| 2010 | Penyelia Latihan Industri Sarjana Muda Semester III 20092010, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Supervisor for Khaironnorain binti Othman, Dipl., Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Penyelia Latihan Industri Diploma Eksekutif (INSEP) Fasa II, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Penilai Projek Kejuruteraan Diploma [DDA3913], Universiti Tun Hussein Onn Malaysia, 2010 | Assessor |
| 2010 | Supervisor for Mohd Fikri bin Azizan, Dipl., Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2009 | Penyelia Latihan Industri Diploma Eksekutif (INSEP) Fasa I, Universiti Tun Hussein Onn Malaysia, 2009 | Supervisor |
| 2009 | Penyelia Latihan Industri Diploma Eksekutif (INSEP) Fasa II, Universiti Tun Hussein Onn Malaysia, 2009 | Supervisor |