Staff Profile

Full NamePROF. MADYA Dr. HASAN ZUHUDI BIN ABDULLAH
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR)
Email
Designation DS54 - PROFESOR MADYA
  KETUA KUMPULAN FOKUS (FG)
BIOACTIVE MATERIAL
FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

Field of Expertise

Field Category (KPT) MATERIAL SCIENCES
Field (KPT) Advanced Materials
Field of Specialization (KPT) Biocompatible Materials/Biomaterials

Areas of Research Interest

1. Anodic Oxidation of Titanium for Biomedical Application
2. Extraction Of Gelatin From Fish Bone, Skin And Scale
3. Extraction Of Hydroxyapatite From Fish Bone And Scale

Innovation Field of Interest

1. Extraction of Gelatin from Fish Bone, Skin and Scales
2. Extraction Of Hydroxyapatite From Fish Bone And Scale For Biomedical Application

Academic Qualification

YearQualificationInstitution
2010 DOKTOR FALSAFAH MATERIALS SCIENCE AND ENGINEERING THE UNIVERSITY OF NEW SOUTH WALES
2003 SARJANA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA
1999 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA

Professional Appointments

DS54 - Profesor Madya

Management Experience

DateDescription
01/01/2019 - 31/12/2019 Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bioactive Material

Professional Societies

YearDescriptionRoleLevel
15/01/2005 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan
15/10/2018 - 31/12/9999 The Institution of Engineers, Malaysia (IEM)
Graduate Member Kebangsaan
01/05/2017 - 31/12/2019 X-Ray Applications Malaysia (Xapp Malaysia-MNS)
Ahli Jawatankuasa Kebangsaan
16/03/2015 - 31/12/9999 Microscopy Society Malaysia (MSM)
Keahlian Seumur Hidup Kebangsaan
29/08/2018 - 28/08/2020 Malaysian Biomaterials Society (MBS)
Naib Presiden Kebangsaan
16/05/2002 - 31/12/9999 Institute of Material Malaysia (IMM)
Ordinary Member Kebangsaan

Teaching Experience

YearDescriptionLevel
2019 Pemilihan Bahan Kejuruteraan [BDA20402], Sesi 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 University
2018 Metallurgy [CDB10403], Sesi 20172018 Semester 3, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Materials Characterisation and Testing [MDB10403], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Pemilihan Bahan Kejuruteraan [BDA20402], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Sains Bahan [BDA10803], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Materials Testing [BDB40203], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Research Methodology Seminar [MBC10100], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Materials Testing [BDB40203], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2015 Materials Science [BDA10803], Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Thin Film And Coating [CDB10603], Sesi 2014/2015 Semester 3, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Materials Science [BDA10803], Sesi 2014/2015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Biomaterials [CDB10203], Sesi 2014/2015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Rolling Stock And Track System [CGR10403], Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Rolling Stock And Track System [CGR10403], Sesi 2014/2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Materials Science [BDA10803], Sesi 2014/2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Rolling Stock And Track System [CGR10403], Sesi 2013/2014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Materials Engineering Selection [BDA20402], Sesi 2013/2014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Materials Characterisation [MDB10404], Sesi 2012/2013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Rolling Stock And Track System [CGR10403], Sesi 2013/2014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Materials Engineering Selection [BDA20402], Sesi 2013/2014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Materials Engineering Selection [BDA20402], Sesi 2012/2013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Materials Engineering Selection [BDA20402], Sesi 2011/2012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Materials Science [BPC3053], Sesi 2011/2012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Rolling Stock and Track System [CGR10403], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Materials Engineering Selection [BDA2042], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Materials Engineering Selection [BDA20402], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2011 Materials Characterisation [MBD10404], Sesi 2011/2012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Materials Engineering Selection [BDA2042], Sesi 2011/2012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Materials Engineering Selection [BDA20402], Sesi 2011/2012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Research Methodology [MDU10100], Sesi 2010/2011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Materials Characterisation [MDB10404 / MKM3104], Sesi 2010/2011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Materials Engineering Selection [BDA2042], Sesi 2010/2011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Materials Engineering Selection [BDA20402], Sesi 2010/2011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2010 Engineering Laboratory II [BDA2701], Sesi 2010/2011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Advanced Composite [MDB 10103 / MKM 2203], Sesi 2010/2011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Materials Science [BPC 3053], Sesi 2010/2011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Research Methodology [MDU10100], Sesi 2010/2011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2009 Materials Engineering Selection [BDA2042], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn University
2004 Computer Method For Engineer [EBB250/2], Sesi 2003/2004 Semester 2, Universiti Sains Malaysia, 2004 University
2004 Materials Technology [DTM 3013], Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn University
2004 Materials Technology 2 [BTM 2042], Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn University
2004 Materials Processing Laboratory [EBB317/2], Sesi 2003/2004 Semester 2, Universiti Sains Malaysia, 2004 University
2004 Materials Technology 1 [BTM 2012], Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn University
2004 Physical Chemistry of Materials Engineering [EBB160/3], Sesi 2003/2004 Semester 2, Universiti Sains Malaysia, 2004 University
2004 Materials Property Laboratory [EBB204/2], Sesi 2003/2004 Semester 2, Universiti Sains Malaysia, 2004 University
2003 Engineering Drawing [EBS110/2], Sesi 2003/2004 Semester 1, Universiti Sains Malaysia, 2003 University
2003 Materials Engineering Laboratory [EBB154/2], Sesi 2003/2004 Semester 1, Universiti Sains Malaysia, 2003 University
2003 Materials Property Laboratory [EBB204/2], Sesi 2002/2003 Semester 2, Universiti Sains Malaysia, 2003 University
2003 Materials Processing Laboratory [EBB317/2], Sesi 2002/2003 Semester 2, Universiti Sains Malaysia, 2003 University
2003 Computer Method For Engineer [EBB250/2], Sesi 2002/2003 Semester 2, Universiti Sains Malaysia, 2003 University
2003 Physical Chemistry Of Materials Engineering [EBB160/3], Sesi 2002/2003 Semester 2, Universiti Sains Malaysia, 2003 University
2003 Engineering Materials [EBB113/3], Sesi 2003/2004 Semester 1, Universiti Sains Malaysia, 2003 University
2003 Microscopy Laboratory [EBB325/2], Sesi 2003/2004 Semester 1, Universiti Sains Malaysia, 2003 University
2002 Computer Methods For Engineer [EBB250/2], Sesi 2001/2002 Semester 2, Universiti Sains Malaysia, 2002 University
2002 Materials Processing Laboratory [EBB317/2], Sesi 2001/2002 Semester 2, Universiti Sains Malaysia, 2002 University
2002 Engineering Materials [EBB113/3], Sesi 2002/2003 Semester 1, Universiti Sains Malaysia, 2002 University
2002 Engineering Drawing [EBB110/2], Sesi 2002/2003 Semester 1, Universiti Sains Malaysia, 2002 University
2002 Materials Laboratory [EBB154/2], Sesi 2002/2003 Semester 1, Universiti Sains Malaysia, 2002 University
2002 Microscopy Laboratory [EBB325/2], Sesi 2002/2003 Semester 1, Universiti Sains Malaysia, 2002 University
2002 Materials Property Laboratory [EBB204/2], Sesi 2001/2002 Semester 2, Universiti Sains Malaysia, 2002 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
K063 New Embolic Agents Based on Natural Polymer of Alginate Incorporated with Superparamagnetic Iron Oxide Nanoparticles(SPIONs)for Uterine Artery Embolization (UAE) Application Ahli 31/12/2021
K097 In Vitro Bioactivity of Novel Chitosan/Gelatin/Halloysite Nanostructured Coatings on Anodised Titanium via Electrophoretic Deposition for Biomedical Applications Ahli 31/12/2021
K105 Biology activity (In Vitro and In Vivo) Testing of New Resources for Halal Natural Hydroxyapatite from Black Tilapia Fish Bones and Scales for Biomedical Applications Ketua 31/12/2021
H135 Extraction of Halal Gelatin from Black Tilapia Fish Bones, Skin and Scales Ketua 30/06/2021
H033 Microencapsulation of Natural Self-Healing Corrosion Agent for Coating Applications Ketua 30/06/2020
H116 POTENTIAL OF MEDIUM-DENSITY FIBERBOARD (MDF) MADE FROM TREATED LONG BEAN (VIGNA SINENSIS L.) FIBRE (LBF) Ahli 30/06/2020
H188 New Antibacterial Biocomposites Film based on Alginate/Chitosan Incorporated with Titanium Dioxide for Wound Healing Applications Ahli 30/06/2020
U978 Development and Evaluation on In Vitro Bioactivity of 3D Printed Biomedical Scaffold from Natural Hydroxyapatite (HAp), Polycaprolactone (PCL), and Montmorillonite (MMT). Ahli 30/04/2020
K131 MPC - Productivity Improvement for Fabrication of Bioactive 3D Printing Filament Produced from Nano-sized Natural Hydroxyapatite, Polylactic Acid, and Montmorillonite. Ahli 31/10/2019
U880 An Explorations Study of The Current Practices, Adoption, And Barriers of 3D Printing Technology For Biomedical Products in Malaysia Ahli 31/08/2019
H006 An innovative approach to facilitate the cleaning process of bird?s nest using nano-sonication assisted with vegetable oils. Ahli 31/03/2019
1462 Fracture of Biomimetic Fibrous Scaffolds in Tissue Engineered Cartilage Ahli 31/12/2017
I005 Halal Hydroxyapatite from Fish Bone for Water Filtration Ahli 30/11/2017
S026 Development Of Biomimetic Scaffolds For Functional Tissue Engineering Of Articular Cartilage Ahli 30/11/2017
1442 In Vitro Bioactivities (UV Light Exposures) On Surface Layer of Anodised Titanium for Biomedical Apllication Ahli 30/06/2017
1212 New Approach of In Vitro Bioactivities of Bioactive Surface Layers on Anodised Titanium Ketua 31/12/2016
1460 New approach to improvement corrosion resistance on X65 pipeline steel and corrosion resistance alloys (CRAs) by using green inhibitor and coating. Ahli 31/12/2016
B053 Preparation and Characterization of Activated Carbon from Palm Oil Shell and Fish Bone for Water Treatment Application Ahli 30/10/2016
1419 New Approach of Preparation Bioactive Surface Layer on Gel Oxidised Titanium Ahli 31/08/2016
U007 Fabrication And Characterisation Of Hydroxyapatite Bioceramic Skull By Using Rapid Prototyping Method And Molding Process Ketua 31/07/2016
1251 Enhanced Performance of Biomedical Implants: Bioactive Surface Layers On Anodised Titanium Ketua 29/02/2016
1313 Extarction Of Halal Gelatin From Fish Bone And Scale Ketua 29/02/2016
A022 High Performance Polymeric Materials Ahli 29/02/2016
1126 Preparation And Characterisation Of Porous Paperclay Ceramic Body For The Porpose Of Membrane Support Ahli 31/08/2014
C043 An Assessment Of UTHM - Industry Partnership With Local Industries (Covering The Food, Textiles And Garment, And Ceramic Industries Ahli 31/07/2014
0836 Electrokinetic Remediation of Heavy Metal in Soil Ahli 30/06/2014
1078 New Approach of In Vitro Bioactivities and Characterisation of Anodised Titanium Ketua 31/12/2013
0745 Synthesis and Characterisation Studies on Surface Modification of Multilayer and Hybrid Porous Membrane Via Different Fabrication Methods Ahli 31/05/2013
0746 Consolidation of Ceramic Porous Membrane Via Different Fabrication Methods Ahli 31/05/2013
0747 Deposition Of Stanum (Iv) Oxide Catalyst On Alumina Foams For Emission Abatement System Ahli 28/02/2013
0953 Anodic Oxidation Of Titanium In Acid Solution For Biomedical Application Ketua 28/02/2013
0954 Surface Modification Of Titanium For Biomedical Application Ketua 28/02/2013
0780 Anodic oxidation of titanium in acid solutions for biomedical application Ketua 14/09/2012

Publications

Book Chapters
Lee Te Chuan, Noor Afifah Ariffin, Nurain Nabila Haslizam, Saidatul Asyilah Samsurrijal, Hasan Zuhudi Abdullah, Maizlinda Izwana Idris
(2018) An Overview On Recent Development Of Biocomposites For Furniture Applications, Transformation Of Manufacturing Technology And Management: A Collection Of Readings, UTHM , 70, ISBN:9789672110965
Lee Te Chuan. Hassan Zuhudi Abdullah, Maizlinda Izwana Idris, Ahmad Nur Aizat Ahmad
(2018) Surface Modification Technologies Of Titanium For Biomedical Application, Transformation Of Manufacturing Technology And Management: A Collection Of Readings, UTHM , 11, ISBN:9789672110965
General Publications
H.Z. Abdullah and C.C. Sorrell
(2008) Anodic Oxidation Of Titanium, Institute of Materials Engineering Australasia , 44, ISBN:-
Journal
Egemen Avcu, Fatih E. Ba?tan, Hasan Z. Abdullah, Muhammad Atiq Ur Rehman, Yasemin Y?ld?ran Avcu, Aldo R. Boccaccini
(2019) Electrophoretic Deposition Of Chitosan-Based Composite Coatings For Biomedical Applications: A Review, PROGRESS IN MATERIALS SCIENCE, Elsevier , 6, 69, ISSN:00796425
T.C. Lee , A.N. Aizat Ahmad, N.A.S. Mohd Pu?ad , N. Manap , H.Z. Abdullah3, M.I. Idris
(2018) Adsorption Efficiency Of Polyvinyl Alcohol -Alginate Beads On Cr (Vi): Effect Of Ph And Temperature, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 142, ISSN:2229838X
T.C. Lee, H.Z. Abdullah, P. Koshy, M.I. Idris
(2018) Deposition Of Novel Bioactive Nanoflower-Like Sodium Titanate On Tio2 Coating Via Anodic Oxidation For Biomedical Applications, MATERIALS LETTERS, Elservier , 2, 256, ISSN:0167577X
S.S. SALEH, M.R. Mohamed YUNUS and H.Z. ABDULLAH.
(2018) Effect Of Uv Irradiation On Apatite Deposition On Anodised Tio2 Coating Formed Under Mixed Acid Solution, INTERNATIONAL JOURNAL OF CURRENT RESEARCH SCIENCE, ENGINEERING & TECHNOLOGY, UR Publisher , 3, 88, ISSN:25814311
S S Saleh, H Z Abdullah, M R Mohamed Yunus
(2018) In Vitro Apatite Deposition On Titania Film Derived From Electrochemical Treatment On Titanium Substrate Under Mixed Acid Electrolyte, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 7, 102, ISSN:2229838X
Mohamad Ali Selimin, Lee Te Chuan, Maizlinda Izwana Idris, Hasan Zuhudi Abdullah
(2018) Physical And Chemical Properties Of Anodised Titanium In Sulphuric Acid For Biomedical Application, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 7, 48, ISSN:26007916
Lee Te Chuan, Norpadzlihatun Manap, Hasan Zuhudi Abdullah, Maizlinda Izwana Idris
(2018) Polyvinyl Alcohol-Alginate Adsorbent Beads For Chromium (Vi) Removal , INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY (UAE), Science Publishing Corporation , 9, 95, ISSN:2227524X
T.C. Lee, H.Z. Abdullah, P. Koshy, M.I. Idris
(2018) Ultraviolet-Assisted Biomimetic Coating Of Bone-Like Apatite On Anodised Titanium For Biomedical Applications, THIN SOLID FILMS, Elservier , 8, 191, ISSN:00406090
T.C Lee, P. Koshy, H.Z. Abdullah, M.I. Idris
(2017) Biomimetic Bone-Like Apatite Coating On Anodised Titanium In Simulated Body Fluid Under Uv Irradiation, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 3, 251, ISSN:16629752
Norhasikin ISMAIL and Hasan Zuhudi ABDULLAH
(2017) Influence Of Extraction Process (Pre-Treatment Time) On The Characteristic Of Black Tilapia Fish Skins Gelatin, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 3, 278, ISSN:16629752
Selimin, Mohamad Ali; Idris, Maizlinda Izwana; Abdullah, Hasan Zuhudi
(2016) Characterisation And Wettability Properties Of Anodised Titanium In Sulphuric Acid For Biomedical Application, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 1, 170, ISSN:16629752
T.C. Lee, M.H.H. Mazlan, M.I. Abbas, Hasan Zuhudi Abdullah, Maizlinda Izwana Idris
(2016) Effect Of Bath Temperature On Surface Properties Of Anodised Titanium For Biomedical Application, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 1, 175, ISSN:16629752
Selimin, Mohamad Ali, Idris, Maizlinda Izwana, Abdullah, Hasan Zuhudi
(2016) Effect Of Current Density On Anodised Titanium In Sulphuric Acid For Biomedical Application, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 1, 141, ISSN: 02555476
Maizlinda Izwana Idris
(2016) Effect Of Ultrasonic Amplitude On Surface Properties Of Anodised Titanium For Biomedical Application, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 160, ISSN:16629752
Hasan Zuhudi Abdullah
(2016) Effects Of Hydrochloric Acid Concentration On The Properties Of Black Tilapia Fish Skin Gelatin, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 165, ISSN:16629752
Maizlinda Izwana Idris
(2016) Effects Of Pre-Treatment Durations On Properties Of Black Tilapia (Oreochromis Mossambicus) Skin Gelatin, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 1, 146, ISSN:16629752
Hasan Zuhudi Abdullah
(2016) Influence Of Calcination Temperature On The Microstructure And Crystallographic Properties Of Hydroxyapatite From Black Tilapia Fish Scale, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 151, ISSN:16629752
Hasan Zuhudi Abdullah
(2016) Nvestigation Of Surface Properties Of Titanium Treated With Combined Alkali And Sodium Removal Treatments, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 1, 225, ISSN:16629752
S. S. Saleh and H. Z. Abdullah
(2016) Optimization And Characterization Of Anatase Formed On Anodized Titanium In Mixed Acids, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 8, 9809, ISSN:18196608
Hasan Zuhudi Abdullah
(2016) Optimization And Characterization Of Anatase Formed On Anodized Titanium In Phosphoric Acid, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 240, ISSN:16629752
T.C. Lee, P. Koshy, H.Z. Abdullah, M.I. Idris
(2016) Precipitation Of Bone-Like Apatite On Anodised Titanium In Simulated Body Fluid Under Uv Irradiation, SURFACE AND COATINGS TECHNOLOGY, Elsevier , 20, ISSN:02578972
T.C. Lee, P. Koshy, H.Z. Abdullah, M.I. Idris
(2016) Precipitation Of Bone-Like Apatite On Anodised Titanium In Simulated Body Fluid Under Uv Irradiation, SURFACE & COATINGS TECHNOLOGY, Elsevier , 9, 20, ISSN:02578972
T.C. Lee, M.H.A. Rashid, M. A. Selimim, H.Z. Abdullah, M.I. Idris
(2016) Precipitation Of Hydroxyapatite On Pure Titanium Substrate Via Single Step Anodic Oxidation, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 5, 78, ISSN:16629795
Maizlinda Izwana Idris
(2016) Preparation Of Bioactive Titanium Film Via Anodic Oxidation In Agitation Condition, MATERIALS SCIENCE FORUM , Trans Tech Publications, Switzerland , 1, 220, ISSN:16629752
Mohamad Ali Selimin, Noor Haafiza Mohd Idrus, and Hasan Zuhudi Abdullah
(2015) Anodic Oxidation Of Titanium For Biomedical Application, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 3, 81, ISSN:16628985
Mohamad Ali Selimin, Noor Haafiza Mohd Idrus, and Hasan Zuhudi Abdullah
(2015) Anodic Oxidation Of Titanium In Acetic Acid For Biomedical Application, ADVANCED MATERIALS RESEARCH , Trans Tech Publications, Switzerland , 10, 455, ISSN:16628985
T.C. Lee, M.F.M. Rathi, M.Y.Z. Abidin, H.Z. Abdullah, M.I. Idris
(2015) Characterisation And In Vitro Bioactivity Of Uv-Treated Anodised Titanium, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 450, ISSN:16628985
H.Z. Abdullah
(2015) Effect Of Calcination On The Properties Of Hydroxyapatite From Tilapia Fish Bones, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 474, ISSN:16628985
H.Z. Abdullah, T.C. Lee, M.I. Idris, C.C. Sorrell
(2015) Effect Of Current Density On Anodised Titanium In Mixture Of ?-Glycerophosphate (?-Gp) And Calcium Acetate (Ca), ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 2, 212, ISSN:16628985
Hasan Zuhudi Abdullah
(2015) Effect Of Current Density On Anodised Titanium In Mixture Of?-Glycerophosphate (?-Gp) And Calcium Acetate (Ca), . ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 3, 212, ISSN:16628985
T.C. Lee, H.Z. Abdullah, M.I. Idris, C.C. Sorrell
(2015) Effect Of Electrolyte Concentration On Anodised Titanium In Mixture Of ?-Glycerophosphate (?-Gp) And Calcium Acetate (Ca), ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 2, 116, ISSN:16628985
Hasan Zuhudi Abdullah
(2015) Effect Of Electrolyte Concentration On Anodised Titanium In Mixture Of?-Glycerophosphate (?-Gp) And Calcium Acetate (Ca), ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 3, 116, ISSN:16628985
M.I. Idris
(2015) Effect Of Heat Treatment On Surface Morphology Of Titanium, ADVANCED MATERIALS RESEARCH , Trans Tech Publications, Switzerland , 10, 445, ISSN:16628985
H.Z. Abdullah
(2015) Effect Of Pre-Treatment Conditions On From Black Tilapia Scale For Gelatin Extraction, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 276, ISSN:1662-8985
M.I. Idris
(2015) Effect Of Sulphuric Acid Concentration On Anodised Titanium For Biomedical Application, EFFECT OF SULPHURIC ACID CONCENTRATION ON ANODISED TITANIUM FOR BIOMEDICAL APPLICATION, Institute of Research Engineers and Doctors, New York , 10, 127, ISSN:23723971
T.C. Lee, M.H.H. Mazlan, M.I. Abbas, H.Z. Abdullah, M.I. Idris
(2015) Effect Of Ultrasonic Amplitude On Surface Properties Of Anodised Titanium For Biomedical Application, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 160, ISSN:16629752
T.C. Lee, M.I. Idris, H.Z. Abdullah
(2015) Effect Of Uv Light Treatment Condition On Apatite Formation Of Anodised Titanium, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 460, ISSN:16628985
T.C. Lee, H.Z. Abdullah, M.I. Idris
(2015) Effect Of Uv Wavelength On Apatite Formation Of Anodised Titanium, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 465, ISSN:16628985
H.Z Abdullah
(2015) Effects Of Pre-Treatment Conditions On Black Tilapia Fish Scales For Gelatin Extraction, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 276, ISSN:16628985
H.Z. Abdullah
(2015) Gel Oxidation Of Titanium At Low Concentration Of Sodium Hydroxide (Naoh), ADVANCED MATERIALS RESEARCH , Trans Tech Publications, Switzerland , 3, 340, ISSN:16628985
H.Z. Abdullah
(2015) Mechanism Of Bone-Like Apatite Formation On Anodised Titanium Under Uv Irradiation, INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING, Institute of Research Engineers and Doctors, New York , 10, 149, ISSN: 23723971
H.Z. Abdullah
(2015) Optimization And Characterization Of Anatase Formed On Anodized Titanium In Sulfuric Acid, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 10, 479, ISSN:16628985
Hasan Zuhudi Abdullah
(2015) Preliminary Studies Of The Effects Of Polyethyleneglycol/Hydroxyapatite Powder-Binder System For 3d Printing Application, ADVANCED MATERIALS RESEARCH , Trans Tech Publications, Switzerland , 3, 345, ISSN:16628985
Hasan Zuhudi Abdullah
(2015) Preparation And Characterization Of Biological Hydroxyapatite (Hap) Obtained From Tilapia Fish Bone, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 3, 152, ISSN:16628985
T.C. Lee, M.H.H. Mazlan, M.I. Abbas, H.Z. Abdullah, M.I. Idris
(2015) Preparation Of Bioactive Titanium Film Via Anodic Oxidation In Agitation Condition, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 220, ISSN:16629752
Hasan Zuhudi Abdullah
(2015) Preparations Of Hydroxyapatite From Tilapia Scales, . ADVANCED MATERIALS RESEARCH , Trans Tech Publications, Switzerland , 3, 30, ISSN:16628985
M.I. Idris
(2015) Surface Characterisation Of Bioactive Titanium Formed Via Anodic Oxidation, INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING, Institute of Research Engineers and Doctors, New York , 10, 44, ISSN:23723971
H.Z. Abdullah
(2015) The Anatase Formation On Anodised Titanium In Sulphuric Acid, ADVANCED MATERIALS RESEARCH, Trans Tech Publications, Switzerland , 3, 334, ISSN:16628985
M.I. Idris
(2015) Uv-Induced Precipitation Of Bone-Like Apatite On Anodised Titanium In Simulated Body Fluid, INTERNATIONAL JOURNAL OF CIVIL AND STRUCTURAL ENGINEERING, Institute of Research Engineers and Doctors, New York , 10, 105, ISSN:23723971
Prosiding / Seminar
Z. Baharom, M. I. Idris, T. C. Lee, and H. Z. Abdullah
(2019) Effects Of Surfactant Concentration On Microencapsulated Waste Vegetable Oil, AIP PUBLISHING , 020105-1, ISBN:9780735417960
Z. Baharom, N. B. Baba, R. Ramli, M. I. Idris, and H. Z. Abdullah
(2019) Microencapsulation Of Natural Self-Healing Agent As Corrosion Coating, AIP PUBLISHING , 020103-1, ISBN:9780735417960
N Ismail and H Z Abdullah
(2019) The Extraction Of Gelatin From Black Tilapia Fish Skins With Different Acid Concentration, IOP PUBLISHING , 012041-1, ISBN:17426596
NOOR AFIFAH ARIFFIN, NURAIN NABILA HASLIZAM, SAIDATUL ASYILAH SAMSURRIJAL, MOHAMAD ALI SELIMIN, NORPADZLIHATUN MANAP, LEE TE CHUAN, HASAN ZUHUDI ABDULLAH, MAIZLINDA IZWANA IDRIS
(2018) A Comparative Study Of Physical And Mechanical Properties Of Wood Plastic Composite Produced From Different Agriculture Residues, IEOM SOCIETY INTERNATIONAL , 2997, ISBN:978153235944
H.Z. Abdullah and A.R.Boccaccini
(2018) Microporous Organic-Inorganic Nanocomposite Coatings On Stainless Steel Via Electrophoretic Deposition For Biomedical Applications, THE ELECTROCHEMICAL SOCIETY , 25, ISBN:9781607685395
Ismail, N., Abdullah, H.Z.
(2017) Influence Of Extraction Process (Pre-Treatment Time) On The Characteristic Of Black Tilapia Fish Skins Gelatin, Trans Tech Publications , 278, ISBN:02555476
Norhasikin Ismail, Hasan Zuhudi Abdullah
(2016) Effects Of Hydrochloric Acid Concentration On The Properties Of Black Tilapia Fish Skin Gelatin, Trans Tech Publications , 165, ISBN:2555476
Lee T.C., Rashid M.H.A., Selimim M.A., Abdullah H.Z., Idris M.I.
(2016) Precipitation Of Hydroxyapatite On Pure Titanium Substrate Via Single Step Anodic Oxidation, Trans Tech Publications, Switzerland , 78 , ISBN:10139826
M.A. Selimin, Z. Malik, N. Anjang, M.I. Idris, and H.Z. Abdullah
(2015) Effect Of Sulphuric Acid Concentration On Anodised Titanium For Biomedical Application, Institute of Research Engineers and Doctors , ISBN:9781632480620
T.C. Lee, H.Z. Abdullah, M.I. Idris
(2015) Mechanism Of Bone-Like Apatite Formation On Anodised Titanium Under Uv Irradiation, Seek Digital Library , 51, ISBN:978163248062
M.A. Selimin, Z. Malik, N. Anjang, M.I. Idris, and H.Z. Abdullah
(2015) Surface Characterisation Of Bioactive Titanium Formed Via Anodic Oxidation, Institute of Research Engineers and Doctors , ISBN:9781632480620
T.C. Lee, H.Z. Abdullah, M.I. Idris
(2015) Uv-Induced Precipitation Of Bone-Like Apatite On Anodised Titanium In Simulated Body Fluid, Seek Digital Library , 22, ISBN:9781632480620
Abdullah HZ
(2014) Characterisation Of Derived Natural Hydroxyapatite (Hap) Obtained From Different Types Of Tilapia Fish Bones And Scales, AIP Publishing , ISBN: 9780735413160
M.I. Idris
(2014) Effect Of Alkali Treatment On Surface Morphology Of Titanium, AIP Publishing , ISBN:9780735413160
Maizlinda Izwana Idris
(2014) Effect Of Applied Voltage On Surface Properties Of Anodised Titanium In Mixture Of ?-Glycerophosphate (?-Gp) And Calcium Acetate (Ca), AIP Publishing , ISBN:9780735413160
T.C. Lee, M.F.M. Rathi, M.Y.Z. Abidin, H.Z. Abdullah, M.I. Idris
(2014) Effect Of Applied Voltage On Surface Properties Of Anodised Titanium In Mixture Of Beta-Glycerophosphate (Beta-Gp) And Calcium Acetate (Ca), AIP Publishing , 020054-1, ISBN:9780735413160
Abdullah HZ
(2014) Extraction And Characterisation Of Gelatin Biopolymer From Black Tilapia (Oreochromis Mossambicus) Scales, AIP Publishing , ISBN:9780735413160
Abdullah HZ
(2014) Extraction Of High Value Added Gelatin Biopolymer From Black Tilapia (Oreochromis Mossambicus) Head Bones, AIP Publishing , ISBN:9780735413160
T.C. Lee, H.Z. Abdullah, M.I. Idris
(2014) Surface Properties, Crystallinity And Optical Properties Of Anodised Titanium In Mixture Of Beta-Glycerophosphate (Beta-Gp) And Calcium Acetate (Ca), AIP Publishing , 020060-1, ISBN:9780735413160
Hasan Zuhudi Abdullah
(2014) Surface Properties, Crystallinity And Optical Properties Of Anodised Titanium In Mixture Of ?-Glycerophosphate (?-Gp) And Calcium Acetate (Ca). , AIP Publishing , ISBN:9780735413160
Rahman H.A
(2013) Effect Of Zeta Potential Of Stanum Oxide (Sno2) On Electrophoretic Deposition (Epd) On Porous Alumina, Trans Tech Publications , 334, ISBN:3037858117
Hasan Zuhudi Bin Abdullah
(2012) Anodic Oxidation Of Titanium In Sulphuric Acid Solution (H2so4) For Biomedical Application, Universiti Sains Malaysia
Hasan Zuhudi Bin Abdullah
(2012) Surface Modification Of Titanium In Phophoric Acid (H3po4) Solution For Biomedical Application, Universiti Sains Malaysia
Hasan Zuhudi Bin Abdullah
(2011) Rigid Polyurethane Foam Reinforced Coconut Coir Fiber Properties
Hasan Zuhudi Bin Abdullah
(2010) Preparation And Characterisation Of Tio2 Thick Films Fabricated By Anodic Oxidation In Sulphuric Acid
Hasan Zuhudi Bin Abdullah
(2010) Titanium Dioxide (Tio2) Films By Anodic Oxidation In Phosphoric Acid
Hasan Zuhudi Bin Abdullah
(2004) Reformulation Of Hydroxyapatite (Hap) With Zno
Hasan Zuhudi Bin Abdullah
(2001) Comparative Study Of Two Different Types Of Hydroxyapatite
Hasan Zuhudi Bin Abdullah
(2000) The Effect Of Binders On The Strength And Microstructure Of Hydroxyapatite
Hasan Zuhudi Bin Abdullah
(2000) The Effect Of Powder Processing Parameters On The Machineability Of Hydroxyapatite Bioceramics

Supervision

YearDescriptionRole
2017 Supervisor for Zulkhibri Bin Baharom, PhD, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2016 Supervisor for Mohammad Zulfarhan Bin Muhd Rodzi, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Farah Danira Binti Muhamad Afandi, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2015 Supervisor for Kamalanathan A/L Karunakaran, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Wyane Anak Belilie, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Nazrin A/L Anjang, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Abdul Rashid Bin Abdul Rahman, Master (Mixed Mode), Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Hilary Anak Nelson, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Sakinah Binti Mohamad Zawahid, Master (Mixed Mode), Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Raveverma A/L Peryasamy, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Pragash A/L Ganeson, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Mohd Sukri Amin Bin Ibrahim, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Nik Mohamed Hanif Bin Mat Yaacob, Master ( Mixed Mode), Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2014 Supervisor for Norhasikin Bte Ismail, PhD, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohamad Ali bin Selimin, PhD, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Nur Akmal Bin Arjuna, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohd Alif Aizuddin Bin Awang, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohd. Firdaus Bin Zaharuddin, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Mustaza Bin Rahmat, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Rozairi bin Yahya @ Yusoff, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Elyas bin Yahya, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Maslim B. Salimi, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Wan Amer Hakim bin Wan Ramlan, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Afifudin bin Ahmad, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Hamira bte Hussein, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2013 Supervisor for Muhammad Khairuzaman Bin Fadzly, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Muhammad Alias Bin Aziz, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Nor Shamimi Bt. Shaari Md Noh, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Nimma Sakini Bt. Che Ab. Hamid, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Mohamad Shahrir Hafiz Bin Samsuddin, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Nor Aniza Binti Norsham, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Co Supervisor for Tan Kwok Jun, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Co Supervisor for Lee Te Chuan, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Ahmad Norman Khalis bin Ahmad Fara, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Kanageswary A/P Sockalingam, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Noor Haafiza Binti Idrus, Master, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Co Supervisor for Siti Alwani Binti Ab. Aziz @ Kamarulzaman, Master, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Mohd Faizal Bin Isa, Master (Course Work), Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Saleh S Saleh Eifallah, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Farris Izuddin Bin Mat Jah, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2012 Supervisor for Rohayu Binti Ahmad, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Izzatul Shahidah Binti Anjul, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nurfarhah Binti Abdullah, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Norhazlin Binti Harun, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nurisah Bt Wahab @ Abdul Wahab, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nor Aziah Bt Hamzah, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Salaina Bt Rabae'i, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nazri Bin Nawi, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Norazman Bin Mustafa, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Mohd Azha Bin Yahya, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Co Supervisor for Mohd Azham Bin Azmi, Master, Universiti Tun Hussein Onn Malaysia Supervisor
2012 Co Supervisor for Siti Hawa bte Mohamad, Master, Universiti Tun Hussein Onn Malaysia Supervisor
2012 Examiner for Master Thesis: Noor Hasliza Bte Kamarudin (UTHM, 2012): Reinforcement of Organic Fiber in Ceramic Shell Mould System for Investment Casting Process Examiner
2012 External Examiner for Iqbal bin Mokhtar, Master, Universiti Teknologi Malaysia, Mac 2012 External Examiner
2012 External Examiner for Kok Lau, PhD, University of New South Wales, Australia, June 2012 External Examiner
2011 Supervisor for Siti Nurul ' Ain Bt Roslan, Sarjana Muda, Universiti Tun Hussein On Malaysia,2011 Supervisor
2011 Supervisor for Nurul Hidayat Binti Mat Isa, Master, Universiti Tun Hussein Onn Malaysia Supervisor
2011 Supervisor for Norazlan bin Abdullah, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Nurul Hidayat binti Mat Isa, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Assessor for the Product Development Grant Universiti Tun Hussein Onn Malaysia (2011) Assessor
2011 Supervisor for Noor Haafiza Bt Mohd Idrus, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2010 Supervisor for Siti Nur Aziana Bt. Mohd. Ismail, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Noorfaezawati Binti Ali, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Mohd Firdaus Bin Mohd Yusof, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Mohammad Syahadan Maksom, Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor

« Back