Staff Profile

Full NamePROF. MADYA DR HILTON @ MOHD HILTON BIN AHMAD
FacultyFAKULTI KEJURUTERAAN AWAM DAN ALAM SEKITAR
DepartmentJABATAN KEJURUTERAAN STRUKTUR DAN BAHAN
Staff Number01211
Email
Designation DS54 - PROFESOR MADYA

Areas of Research Interest

1. Bolted Joints in Composite Materials using Finite Element Method Framework
2. Utilization of using recycle materials in concrete technology
3. Utilization of using pozzolans in concrete technology
4. Study of reinforced concrete behaviour using finite element framework

Innovation Field of Interest

1. recycle materials
2. Bolted joints in structures

Academic Qualification

YearQualificationInstitution
2012 DOKTOR FALSAFAH STRUCTURES AND MATERIALS ENGINEERING UNIVERSITY OF SURREY
2006 SARJANA KEJURUTERAAN STRUKTUR UNIVERSITI PUTRA MALAYSIA
2002 SARJANA MUDA KEJURUTERAAN AWAM UNIVERSITI MALAYA

Professional Appointments

DS54 - Profesor Madya

Management Experience

YearDescription
2012 - 2014 Ketua Makmal
Fakulti Kejuruteraan Awam dan Alam Sekitar, Jabatan Kejuruteraan Struktur dan Bahan

Professional Societies

YearDescriptionRoleLevel
01/01/2006 - 31/12/2006 The Institution of Engineers, Malaysia (IEM)
SISWAZAH INSTITUT JURUTERA MALAYSIA
Ahli Kebangsaan

Teaching Experience

YearDescriptionLevel
2016 Design of Steel and Timber Structures [BFC43003], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2015 Mechanics of Materials and Hydraulics Laboratory [BFC21201], Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Advanced Structure Analysis [MFA10203], Sesi 2014/2015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Structural Analysis [BFC21403], Sesi 2014/2015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Design of Steel and Timber Structures [BFC43003], Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Structural Analysis [BFC21403], Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Civil Engineering Softwares Application [BFC43201], Sesi 2014/2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Advanced Structures Analysis [MFA10203], Sesi 2014/2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Reinforced Concrete Design 1 [BFC32102], Sesi 2014/2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Mechanics of Materials [BFC20903], Sesi 2013/2014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Design of Steel and Timber Structures [BFC43003], Sesi 2013/2014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Advanced Structure Design [MFS10103], Sesi 2013/2014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Advanced Structures Analysis [MFA10203], Sesi 2013/2014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Civil Engineering Software Applications [BFC43201], Sesi 2013/2014, Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Mechanics of Materials [BFC20903], Sesi 2012/2013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Advanced Structures Analysis [BFS 40103], Sesi 2012/2013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Mechanics of Materials {BFC20903], Sesi 2013/2014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Advanced Structures Analysis [MFA10203], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Advanced Structures Analysis [MFA10203], Sesi 2011/2012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Design of Steel and Timber Structures [BFC43003], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Mechanics of Materials [BFC 20903], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2008 Civil Engineering Practice [BFC3133], Sesi 2007/2008 Semester 3, Universiti Tun Hussein Onn Malaysia, 2008 University
2008 Civil Engineering Software [BFC4052], Sesi 2008/2009, Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 University
2008 Geotechnical and Structures Lab [BFC3051], Sesi 2008/2009 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 University
2007 Structural Analysis [BFC3023], Sesi 2007/2008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Statics and Dynamics [BFC1022], Sesi 2007/2008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Structural Analysis [DFC3013], Sesi 2007/2008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Civil Engineering Practice [BFC3133], Sesi 2006/2007 Semester 3, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Materials and Fluid Lab [BFC1051], Sesi 2007/2008 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 University
2007 Structural Concrete Design [BFC3113], Sesi 2007/2008 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 University
2006 Hydraulics and Mechanics of Materials Lab [BFC2091], Sesi 2006/2007, Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Structural Design [BPD3083], Sesi 2006/2007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Materials and Structures Lab [DFC2031], Sesi 2006/2007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Mechanics of Materials [BFC2083], Sesi 2006/2007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Advanced Structures [BKA4123], Sesi 2006/2007 Semester 1, Universiti Tun Hussein Malaysia, 2006 University
2004 Civil Engineering Software Application [BKA5052], Sesi 2004/2005 Semester 2, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Civil Engineering Materials Laboratory [CEMB111], Sesi 2004/2005 Semester 1, Universiti Tun Hussein Malaysia, 2004 Private
2004 Civil Engineering Materials [CEMB111], Sesi 2004/2005 Semester 1, Universiti Tenaga Nasional, 2004 Private
2003 Mechanics of Materials Laboratory [CEMB121], Sesi 2003/2004 Semester 1, Universiti Tenaga Nasional, 2003 Private
2003 Geology Laboratory [CEGB211], Sesi 2003/2004, Semester 2, Universiti Tenaga Nasional, 2003 Private
2003 Highway and Transportation Engineering Laboratory [CETB411], Sesi 2003/2004, Semester 2, Universiti Tenaga Nasional, 2003 Private
2003 Mechanics of Materials Laboratory [CEMB121], sesi 2003/2004 Semester 2, Universiti Tenaga Nasional, 2003 Private
2003 Mechanics of Fluid Laboratory [CEWB121], sesi 2003/2004 Semester 1, Universiti Tenaga Nasional, 2003 Private
2002 Geology Laboratory [CEMB211], Sesi 2002/2003 Semester 2, Universiti Tenaga Nasional, 2002 Private
2002 Civil Engineering Materials Laboratory [CEMB111], Sesi 2002/2003 Semester 2, Universiti Tenaga Nasional, 2002 Private

Research Grants And Contracts

CodeTitleDesignationEnd Date
U549 Structures Response In Notched And Bolted Joints Of Woven Fabric Kenaf Fiber Under Aggressive Environment Ketua 31/05/2018
C053 Jamilus Research Centre (JRC) Ahli 31/07/2014
0395 Study of Lightweight Concrete by using waste Styrofoan and Fly Ash Under Local Environmental Conditions Ahli 30/09/2009
0459 Feasibility Study of Using Palm Oil Fibre in Concrete Technology Ketua 31/01/2009
U245 STRENGTH PREDICTION IN CFRP WOVEN LAMINATE BOLTED SINGLE-LAP JOINTS UNDER QUASI-STATIC LOADING USING XFEM Ketua 31/05/2017
U265 Structure Behaviour Of Notches And Bolted Joints On Woven fabric Kenaf reinforce polymer Composite Plates With Combined Action of Temperature And Moisture Condition Ketua 31/10/2016
R034 Experimental Study and Numerical Modelling of CFRP Hybrid Adhesively Bonded Bolted Joints Ketua 29/02/2016
S011 Establishing the Performance Curve for Eqwin Turbine Ahli 31/10/2010

Publications

General Publications
NORASHIDAH ABD RAHMAN
(2013) Static And Dynamic, UTHM
Hilton @ Mohd Hilton Bin Ahmad
(2007) Interaksi Struktur-Tanah Menggunakan Kaedah Unsur Terhingga, BULETIN CECTUS EDISI JULAI-DISEMBER 2007 ISSN 1985-2886
Journal
Hilton, A., Al-Emran, I.
(2017) Fracture Energy Of Woven Fabric Kenaf Composite Plates With Different Fiber Orientations , MATERIALS SCIENCE FORUM, Trans Tech Publications Ltd , 2, 56, ISSN:16629752
H.AHMAD, A.D.CROCOMBE, P.A.SMITH
(2017) Strength Prediction In Cfrp Woven Laminate Bolted Double-Lap Joints Under Quasi-Static Loading Using Xfem, COMPOSITES PART A, ELSEVIER LTD , 1, 192, ISSN:1359835X
Anders Hans, Hilton Ahmad
(2017) Xfem Modelling Of Single-Lap Woven Fabric Kenaf Composites Bolted Joints With Temperature Action, JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Scientific Research Publishing Company , 8, 2687, ISSN:18187803
H. Ahmad
(2016) Bearing Stresses In Bolted Composite Joints With Different Contact Interactions, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), Engg Journals Publications , 4, 988, ISSN:0975-4024
Sugiman, S., Ahmad, H.
(2016) Comparison Of Cohesive Zone And Continuum Damage Approach In Predicting The Static Failure Of Adhesively Bonded Single Lap Joints , JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, Taylor and Francis Ltd , 8, 1, ISSN:0169-4243
Yee, L.S., Ahmad, H.
(2016) Experimental Strength Of Single-Lap Hybrid Joints On Woven Fabric Kenaf Fiber Composites Under Quasi Static Condition, MATEC WEB OF CONFERENCES, EDP Sciences , 4, 1, ISSN:2261236X
Anders Hans Romanye, Hilton Ahmad
(2016) Notched Strength Of Woven Fabric Kenaf Composite Plates With Different Stacking Sequences And Hole Sizes, MATEC WEB OF CONFERENCES, EDP Sciences , 10, 1, ISSN:2261236X
H. Ahmad
(2016) Stress Distribution Of Bolted Joints With Different Lay-Up Types, MATEC WEB OF CONFERENCES, EDP Sciences , 8, 1, ISSN:2261236X
A E Ismail, M A Azlan, M L M Tobi and M H Ahmad
(2016) Stress Intensity Factors Of Double Edge Cracks In Large Groove Plates Under Mode I Tension, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 11, 1, ISSN:17578981
H. Ahmad
(2015) Strength Prediction Of Double-Lap Bolted Joints Of Woven Fabric Cfrp Composite Plates Using Hashin Formulations, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 9, 290, ISSN:16627482
H. AHMAD, A.D. CROCOMBE, P.A. SMITH
(2014) Strength Prediction In Cfrp Woven Laminate Bolted Single-Lap Joints Under Quasi-Static Loading Using Xfem, COMPOSITES PART A, ELSEVIER LTD , 11, 82, ISSN:1359835X
Hilton Ahmad
(2014) Strength Prediction Of Double-Lap Woven Cfrp Bolted Joint Incorporating Material Softening, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 3, 234, ISSN:16627482
H.Ahmad
(2014) Stress Distribution In Composite Double-Lap Bolted Joints Incorporating With Clamp-Up, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 10, 152, ISSN:16627482
H. Ahmad
(2013) Failure Modelling Of Woven Gfrp Bolted Joints Under Quasi-Static Loading, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 10, 32, ISSN:2229-838X
H.AHMAD, A.D. CROCOMBE, P.A. SMITH
(2013) Physically Based Finite Element Strength Prediction In Notched Woven Laminates Under Quasi-Static Loading, PLASTICS RUBBER AND COMPOSITES , TAYLOR AND FRANCIS , 4, 93, ISSN:1465-8011
H. Ahmad
(2013) Strength Prediction Of Notched Woven Composite Plates Using A Cohesive Zone Approach, ADVANCED MATERIAL RESEARCH, Trans Tech Publications , 10, 199, ISSN:1662-8985
Hilton @ Mohd Hilton Bin Ahmad
(2009) Chemical Attack Of Malaysian Pozzolans Concrete, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 11, ISSN:19858809
Hilton @ Mohd Hilton Bin Ahmad
(2009) Non-Linear Analysis Of Water Thrust On Bakun Concrete Faced Rockfill Dam, ASM SCIENCE JOURNAL, Akademi Sains Malaysia , 17, ISSN:18236782
Hilton @ Mohd Hilton Bin Ahmad
(2008) Principal Stresses In Non-Linear Analysis Of Bakun Concrete Faced Rockfill Dam, ASEAN JOURNAL ON SCIENCE AND TECHNOLOGY FOR DEVELOPMENT, Thailand , 469, ISSN:02175460
Prosiding / Seminar
Lee Sim Yee, H. Ahmad
(2017) Bearing Stress At Failure Of Double-Lap Hybrid Joints In Woven Fabric Kenaf Fiber Composite Plates Under Quasi-Static Loading , EDP Sciences , 1, ISBN:2261236X
Ahmad, H., Rahim, S.,
(2017) Notched Strength Of Woven Fabric Kenaf Composites With Different Fiber Orientations, EDP Sciences , 1, ISBN:2261236X
Hilton Ahmad, Lee Sim Yee and Khairi Supar
(2017) Static Strength Of Adhesively-Bonded Woven Fabric Kenaf Composite Plates, IOP Publishing , 1, ISBN:1757-899X
K. Supar, H. Ahmad
(2017) Xfem Modelling Of Multi-Holes Plate With Single-Row And Staggered Holes Configurations , EDP Sciences , 1, ISBN:2261-236X
N.M. Noor, M.H. Ahmad,N.H. Othman
(2016) Effect Of Crumb Rubber On The Fresh Properties Of Mortar And Concrete, MATEC WEB OF CONFERENCE , - , ISBN:-
A.E Ismail
(2016) Effect Of Hybridized Fiber Wrapped Around The Aluminum Tubes On The Crushing Performances, IOP Publishing , 012019 , ISBN:1757-899X
Hilton @ Mohd Hilton Bin Ahmad
(2012) 3-D Modelling Of Gfrp Woven Fabric Double-Lap Bolted Joint, Asian-Australasian Association for Composite Materials
Hilton @ Mohd Hilton Bin Ahmad
(2010) Finite Element Based Damage And Fracture Modelling In Notched Composites
Hilton @ Mohd Hilton Bin Ahmad
(2009) Engineering Properties Of Lightweight Styrofoam Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2009) Mechanical Properties Of Fly Ash Styrofoam Foamed Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2009) Non-Destructive Test Of Fly Ash Styrofoam Foamed Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Analisis Struktur Menggunakan Kaedah Unsur Terhingga
Hilton @ Mohd Hilton Bin Ahmad
(2008) Analysis Of Bakun Cfrd At The End Of Construction Using Duncan-Chang Model
Hilton @ Mohd Hilton Bin Ahmad
(2008) Compressive Strength Of Palm Oil Fuel Ash
Hilton @ Mohd Hilton Bin Ahmad
(2008) Displacements On Non-Linear Analysis In Different Construction Stages Of Bakun Cfrd
Hilton @ Mohd Hilton Bin Ahmad
(2008) Drying Shrinkage Of Cement Replacement Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Linear Analysis In Different Construction Stages Of Bakun Cfrd
Hilton @ Mohd Hilton Bin Ahmad
(2008) Mix Design Of Palm Oil Fiber Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Mix Design Of Styrofoam Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Non Destructive Test Of Palm Oil Fiber Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Non-Destructive Test Of Palm Oil Clinker Concrete
Nurazuwa Md Noor
(2008) Shrinkage Of Malaysian Palm Oil Clinker Concrete, UMP , ISBN:-
Hilton @ Mohd Hilton Bin Ahmad
(2008) Strength Developement Of Styrofoam Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Stresses On Non-Linear Analysis In Different Construction Stages Of Bakun Cfrd
Hilton @ Mohd Hilton Bin Ahmad
(2008) Utilization Of Micronised Biomass Silica In Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Vertical Deformation Of Concrete Faced Rockfill Dam Using Simulation Of Ghost-Birth-Ghost Technique
Hilton @ Mohd Hilton Bin Ahmad
(2008) Water Adsorption By Immersion Of Malaysian By-Product Cement Replacement Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Water Permeability Of Malayisan Palm Oil Clinker Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2008) Water Permeability Of Malaysian By-Product Cement Replacement Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2007) Analisis Struktur Empangan Batuan Berpermukaan Konkrit Menggunakan Kaedah Unsur Terhingga
Hilton @ Mohd Hilton Bin Ahmad
(2007) Analysis Of Interface Element Between Concrete Slab And Rockfill Dam Of Cfrd
Hilton @ Mohd Hilton Bin Ahmad
(2007) Fresh Concrete Properties Of Local Palm Oil Clinker Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2007) Linear Analysis Of Bakun Concrete Faced Rockfill Dam
Hilton @ Mohd Hilton Bin Ahmad
(2007) Mechanical Properties Of Palm Oil Clinker Concrete
Hilton @ Mohd Hilton Bin Ahmad
(2007) Non-Linear Analysis Of Bakun Concrete Faced Rockfill Dam
Hilton @ Mohd Hilton Bin Ahmad
(2007) Physical Properties Of Local Palm Oil Clinker And Fly Ash
Hilton @ Mohd Hilton Bin Ahmad
(2007) Principal Stress Of Non-Linear Analysis Of Bakun Faced Rockfill Dam
Hilton @ Mohd Hilton Bin Ahmad
(2007) The Suitability Of Metamorphic Rock In Selangor And Perak As Unbound Aggregate Pavement Base
Hilton @ Mohd Hilton Bin Ahmad
(2006) Development Of Coarse Aggregate Index Suitability For Pavement Use Based On Cipw Nominal Classification
Hilton @ Mohd Hilton Bin Ahmad
(2006) Evaluation, Classification And Usability Of Sg. Long Granite As Aggregate Material

Consultancies

YearDescriptionLevel
2012 Instructor for MFA10203 (Advanced Structure Analysis), Politeknik Sultan Ahmad Shah (POLISAS), 2012-2013 University

Supervision

YearDescriptionRole
2016 Supervisor for Andrian Anyie Alah, BEng, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Mohamad Irwan Bin Kamaruddin, BEng, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Maznul Ariff Bin Mastury, BEng, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Syaza Binti Mohamad Alam Shah, BEng, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Muhammad Safwan Bin Abdul Rahim, BEng, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2015 Supervisor for Rahmi Hidayaty Binti Marwan, BEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Khairi BIn Supar, BEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Mohd Adzhar Bin Kamal, BEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Muhamad Zubir Bin Zaidi, BEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Mohd Akmal Afif Bin Abu Bakar, BEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Fariqhnur Shaqif Bin Faridul Atar, BEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Anders Hans anak Ramayne, Master (Research), 2015 Supervisor
2015 Supervisor for Khairi Bin Supar, PhD, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2014 Supervisor for Nurul Farehah Binti Kamaruddin, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohamad Hamirul Bin Abdul Karim, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohamed Ibrahim Aden, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Maizatul Edora Binti Dolek @ Ahmad Dolek, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Syafiq Bin Shahrom, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mustafa Abbas Abed, MEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Ikhwani Bin Abdul Wahid, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Noor Syazwani Binti Mohd Zubir, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohamad Iskandar Bin Arsat, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Anders Hans ak Romayne, BEng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2013 Supervisor for Norlida Binti Ramlee, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Awang Firhan Bin Awang Ahmad, BEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Farah Abdi Mohamed, MEng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Lee Sim Yee, PhD, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 External Examiner for Muhammad Sharaffuddeen Suhaimi, Master of Engineering, Universiti Teknologi Malaysia, May 2013 External Examiner
2012 Supervisor for Ahmad Hariss Faizohar B Abdul Fatah, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Zuraini Bt Din, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Co-Supervisor for Marwan Alferjani, PhD, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Cheah Sheng Hong, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Lee Wan Yee, BEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Azman Bin Abdullah, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Zikri Bin Tahrim, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Zamzilawati Bt Abdullah, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Zakiah Bt Hassan, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Nur Bazilah Bt Ishak, MEng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2008 Supervisor for Mohd Shafiq Bin Md Radzi, BEng, Universiti Tun Hussein Malaysia, 2008 Supervisor
2008 Supervisor for Wan Hamizi Bin Wan Hanafi, BEng, Universiti Tun Hussein Onn Malaysia, 2008 Supervisor
2008 Supervisor for Mohd Ruzaini Bin Ahmad Suhaimi, BEng, Universiti Tun Hussein Onn Malaysia, 2008 Supervisor
2008 Supervisor for Beh Loong Fatt, BEng, Universiti Tun Hussein Onn Malaysia, 2008 Supervisor
2007 Supervisor for Rahayu Binti Ramli, BEng, Universiti Tun Hussein Onn Malaysia, 2007 Supervisor

Extension & Public Services

YearDescriptionLevel
2012 FKAAS Academic Promoter on Undergraduate and Post-Graduate Programs, Malaysia, 2012-2014 University
2012 Head of Examination Committe, Graduate Unit, Faculty of Civil and Environmental Engineering, 2012-2014 University
2012 Examination Coordinator for JKSB, Faculty of Civil and Environmental Engineering, 2012-2013 University
2007 Outcome Based Education (OBE) Committee Member, FKAAS, Universiti Tun Hussein Onn Malaysia, 2007-2008 University
2006 Testing and provides technical report on "Bionic bar" for Hospital Batu Pahat, Johor, Malaysia, 2006 Government
2006 CESWEC Committee Member, FKAAS, Universiti Tun Hussein Onn Malaysia, 2006-2008 University

« Back