Staff Profile
| Full Name | Dr. SITI JUITA MASTURA BINTI MOHD SALEH |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN AERONAUTIK (JKA) |
| Designation | DS51 - PENSYARAH KANAN |
|
PENYELIDIK UTAMA RESEARCH CENTER FOR UNMANNED VEHICLES (RECUV) FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Field of Expertise
| Field Category (KPT) | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
|---|---|
| Field (KPT) | Aerospace Science and Technology |
| Field of Specialization (KPT) | Aerospace Science and Technology |
Areas of Research Interest
| 1. | Aircraft Structure |
| 2. | Aircraft Design |
| 3. | Aeroelasticity |
| 4. | Composite Aerostructure |
Innovation Field of Interest
| 1. | Blended Wing Body Aircraft |
| 2. | Wing-In Ground Effect Craft |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2017 | DOKTOR FALSAFAH AEROSPACE | CRANFIELD UNIVERSITY |
| 2007 | SARJANA KEJURUTERAAN AEROSPACE | THE UNIVERSITY OF SHEFFIELD |
| 2003 | DIPLOMA KEJURUTERAAN AEROSPACE | UNIVERSITI TEKNOLOGI MARA |
| 1999 | SC/MCE/SPM/SPVM | MAKTAB RENDAH SAINS MARA TAIPING PERAK |
Professional Appointments
| DS51 - Pensyarah Kanan |
Management Experience
| Date | Description |
|---|---|
| 01/06/2021 - 31/12/2023 | Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Research Center For Unmanned Vehicles (RECUV) |
| 01/01/2020 - 30/06/2021 | Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Aircraft System and Design Research |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 18/11/2011 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2020 | Aircraft Systems [BDU20402], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2020 | Aicraft Design [BDU20703], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 | University |
| 2019 | Aircraft Design [BDU 20703], Sesi 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Flight Stability and Control [BDL 30102], Sesi 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Aircraft Structure [BDU 20103], Sesi 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2019 | Aircraft Structure [BDU 20103], Sesi 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2018 | Airport Management [BDU 30102], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Engineering Technology Mathematics III [BDU21103], Sesi 20182019 Semester 3, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Aircraft Design [BDU 20703], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Engineering Drawing [BDU 10303], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2012 | Engineering Technology Material [BDU 10603], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 | University |
| 2012 | Aircraft Design [BDU 20703], Sesi 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 | University |
Research Grants And Contracts
| Code | Title | Designation | End Date |
|---|---|---|---|
| Q049 | Novel OPR Approach Towards Overcoming the Boundaries Between Production Quality and Design Engineering | Ketua | 31/10/2023 |
| K330 | Aerodynamics and Aeroacoustics Studies of Hybrid VTOL Drones for Long-range and Low-noise Parcel Delivery | Ahli | 30/04/2023 |
| B106 | DEVELOPMENT OF PINEXRI - X (TETHERED DRONE FOR AGRICULTURE) | Ahli | 14/09/2022 |
| H716 | An Architecture of Wired Agriculture Drone | Ahli | 30/04/2022 |
| H478 | Smart Farming Management : Development of Autonomous Spraying Fertilizer by Using Drone in Agricultural Field | Ahli | 31/03/2022 |
| H663 | Smart Farming Management : Development of Autonomous Spraying Fertilizer in Agricultural Field | Ahli | 31/12/2021 |
| K136 | Design, Build and Flight Test of A High Payload Cargo Drone System (C-Drone) | Ahli | 30/04/2021 |
| H147 | A New Design of Small-Scaled Remote Control Wing-In Ground (WIG) Effect Craft for Surveillance | Ketua | 31/12/2020 |
| X084 | Socio-Education Lab For Orang Asli | Ahli | 20/04/2019 |
| X085 | Fly For Heart | Ketua | 20/04/2019 |
Publications
| Book |
|---|
| Dr. Siti Juita Mastura binti Mohd Saleh, Ts. Dr. Mohd Fadhli bin Zulkafli, Dr. Mohammad Zulafif bin Rahim (2020) A Study On Supply And Demand Of Technical And Vocational Education And Training (Tvet) Workforce In Automative Aftermarket Industry, PERPUSTAKAAN NEGARA , 1, ISBN:9789672393139 |
| Dr. Mohammad Zulafif bin Rahim, Ts. Dr. Mohd Fadhli bin Zulkafli, Dr. Siti Juita Mastura binti Mohd Saleh (2019) Supply And Demand Of Tvet Workforce In Malaysia Aerospace Industry, PERPUSTAKAAN NEGARA , 1, ISBN:9789672393092 |
| Journal |
| Nur Sabreena Adleen Abdul Khalid, Siti Juita Mastura Mohd Saleh, Aslam Abdullah, Mohammad Zulafif Rahim, Mohd Fadhli Zulkafli (2020) Investigation On Thin Airfoil Theory And Symmetrical Naca Compatibility At High Reynolds Numbers, INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), IAEME PUBLICATION , 11, 1030, ISSN:09766499 |
| Mohd Fauzi Yaakub, Siti Juita Mastura Mohd Saleh, Aslam Abdullah, Nik Ahmad Ridhwan Nik Mohd, Mohammad Fahmi Pairan (2019) Assessing Helicopter Main Rotor Blade Critical Area Using Blade Element Theory In The Cases Of Forward Speed And Blade Collective Pitch Angle Increments, TEST ENGINEERING AND MANAGEMENT, THE MATTINGLEY PUBLISHING CO., INC. , 11, 622, ISSN:01934120 |
| Surendran Suresh, Aslam Abdullah, Siti Juita Mastura Mohd Saleh, Mohd Fadhli Zulkafli, Mohammad Fahmi Abdul Ghafir (2019) Numerical Study Of The Flow Over Symmetrical Airfoils With Ground Effects, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY, IAEME Publication , 4, 1106, ISSN:09766359 |
| Mohammad Khairul Fadhli Mohammad Azizi, Siti Juita Mastura Mohd Saleh, Mohanad Al-Ghriybah (2019) Optimization Of Bow And Arrow Design Subject To Aerodynamic Characteristics, JOURNAL OF AVIATION AND AEROSPACE TECHNOLOGY, FAZ PUBLISHING , 2, 1, ISSN:26827433 |
| Prosiding / Seminar |
| Hensman, J., Worden, K., Mohd-Saleh, S. (2008) Feature Extraction From Acoustic Emission Waveforms Using A Discrete Wavelet Transform, EWSHM , 1152, ISBN:9781932078947 |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2020 | Consultant for Automotive Aftermarket Industry, Malaysia Automotive, Robotics and IoT Institute (MARii), MITI | National |
| 2019 | Consultant for Malaysia Aerospace Industry, National Aerospace Industry Coordinating Office (NAICO), MITI | National |
Supervision
| Year | Description | Role |
|---|---|---|
| 2020 | Supervisor for Zahra Binti Jalaluddin, Final Year Project 2, UTHM, 2020 | Supervisor |
| 2020 | Reviewer for Edited Books, Aeronautical Analysis via Experimental and Computational Approaches, Universiti Teknologi Malaysia | Assessor |
| 2020 | Supervisor for Nur Afiqah Binti Noor Azhar, Final Year Project 2, UTHM, 2019 | Supervisor |
| 2020 | Supervisor for Cliff Christopher Marcus, Final Year Project 2, UTHM, 2020 | Supervisor |
| 2020 | Supervisor for Muhammad Fuad Bin Nor Azman, Final Year Project 1, UTHM, 2020 | Supervisor |
| 2020 | Referee Pameran Projek Bersepadu (IDP), Fakulti Kejuruteraan Pembuatan, UTeM, June 2020 | Referee |
| 2019 | Supervisor for Muhammad Afiq Daniel Bin Mohd Arsad, Final Year Project 1, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Muhammad Hariz Bin Roszeli, Final Year Project 2, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Cliff Christopher Marcus, Final Year Project 1, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Nur Afiqah Shahmina Binti Noor Azhar, Final Year Project 1, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Ahmad Zuhairi Bin Azsman, Final Year Project 2, UTHM, 2019 | Supervisor |
| 2019 | Supervisor for Muhammad Afiq Daniel Bin Mohd Arsad, Final Year Project 2, UTHM, 2019 | Supervisor |
| 2018 | Supervisor for Ahmad Zuhairi Bin Azsman, Final Year Project 1, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Muhammad Hariz Bin Roszeli, Final Year Project 1, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Mohammad Khairul Fadhli Bin Mohd Azizii, Final Year Project 2, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Mohammad Khairul Fadhli Bin Mohd Azizi, Final Year Project 1, UTHM, 2018 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2020 | Community Service (Drone Technical Team) for the Development of Basic Facilities for Residents of Kampung Salangan and Kampung Sarbu Pulau Banggi, Sabah, Yayasan Amal Malaysia | National |
Courses & Training
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2021 | UAS PILOT TRAINING COURSE (ONLINE) LAIN-LAIN / ONLINE COURSE | 29/09/2021 - 30/09/2021 |
| 2021 | ONLINE WEBINAR: ELECTRONIC TECHNICAL LOG IN AVIATION MAINTENANCE FKMP,UTHM / ONLINE - ZOOM | 06/07/2021 |
| 2021 | INDUSTRIAL TALK: CURRENT TRENDS OF MANUFACTURING AEROSPACE INDUSTRY UTHM / Online streaming (Zoom) | 30/06/2021 |
| 2021 | KURSUS PENGGUNAAN SISTEM HIBRID DI BILIK-BILIK KULIAH BAGI TUJUAN P&P UTHM / UTHM | 31/03/2021 |
| 2021 | MYFKMP VIRTUAL INDUSTRIAL TALK SERIES: MALAYSIA AEROSPACE INDUSTRY OUTLOOK AND DEVELOPMENT POLICY FKMP,UTHM / Online streaming (Zoom) | 21/01/2021 |
| 2020 | BENGKEL IDEATION & BUSINESS CANVAS UTHM / MAKMAL INOVASI UTHM-FRAUNHOFER | 05/11/2020 |
| 2020 | BENGKEL PEMBANGUNAN PROGRAM EKSEKUTIF DAN PROFESIONAL UTHM UTHM / M SUITES HOTEL JB | 12/03/2020 - 14/03/2020 |
| 2020 | UTHM GERMAN DAY 2020 UTHM / UTHM | 19/02/2020 |
| 2020 | PROGRAM TRANSFORMASI MINDA BIL 1/2020 PEJABAT PENDAFTAR,UTHM / ISMAH BEACH RESORT MELAKA | 02/02/2020 - 06/02/2020 |