Staff Profile

Full NameENCIK KAMARUDDIN BIN KAMDANI
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN PEMBUATAN
Email
Designation DS52 - PENSYARAH KANAN
  PENYELIDIK UTAMA
PUSAT PENYELIDIKAN PEMESINAN JITU (PREMACH)
FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

Field of Expertise

Field Category (KPT) MANUFACTURING
Field (KPT) Milling and Process Materials
Field of Specialization (KPT) Milling and Process Materials

Academic Qualification

YearQualificationInstitution
2005 SARJANA KEJURUTERAAN PEMBUATAN UNIVERSITI ISLAM ANTARABANGSA MALAYSIA
1997 SARJANA MUDA KEJURUTERAAN MEKANIKAL UNIVERSITY OF HARTFORD

Professional Appointments

DS52 - Pensyarah Kanan

Management Experience

DateDescription
01/06/2021 - 31/12/2023 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Penyelidikan Pemesinan Jitu (PREMACH)
01/07/2021 - 30/06/2022 Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pengurusan Makmal
01/01/2020 - 30/06/2021 Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Penyelidikan Pemesinan Jitu (PREMACH)

Professional Societies

YearDescriptionRoleLevel
18/11/2011 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2005 Management and Quality Assurance [BTM 3332], sesi 2004/2005 sem 2, UTHM. University

Research Grants And Contracts

CodeTitleDesignationEnd Date
K306 Characterization on the Formation Mechanism of Thin Film Lubrication Layer on the Cutting Tool Surface after Machining Process Ahli 31/10/2022
K136 Design, Build and Flight Test of A High Payload Cargo Drone System (C-Drone) Ahli 30/04/2021
H205 Experimental Study On The Degree Of Surface Generation By Edge Preparation Tools And Propose Optimization Approach Ahli 30/03/2021
1591 Determination of tribological characteristic of modified jatropha oil mixed with ionic liquid as an additive for sustainable lubricant in machining process Ketua 31/01/2020
1586 Parameter Correlation and Mechanism in Catalytic Erosion of Polycrystalline Diamond Ahli 31/07/2019
X079 Experimental Study on the effect of combination of drilling and reaming tool geometry on hole quality Ahli 30/06/2018
X080 The Effect of Helix angle variation on drilling performance Ahli 30/06/2018
X081 Experimental study on surface generation in vibration assisted milling Ahli 30/06/2018
0828 Direct Recycling of Automotive Scrap Material (Al 6060) in High Speed Machining Process - Propose Waste to Resources Ahli 31/12/2013
0829 An Advanced Approach to Analyze the Coating Tool Wear in Dry Milling of Die Material Ahli 30/06/2013
S003 Design Of New Cutting Tool Geometry For High Speed Drilling Of Titanium Alloy Ketua 30/11/2008
0201 Performance Evaluation Of Cutting Tools When Machining Aerospace Materials Ketua 14/09/2007

Publications

Book
Mohd Rasidi Bin Ibrahim, Noor Hakim Bin Rafa?ai, Kamarudin Bin Kamdani
(2018) Manufacturing Technology, UTHM , 1, ISBN:0302380000
Journal
Zaidi Embong
(2020) Study Of Ionic Liquids (Ail And Pil) Viscosity And Its Functional Groups Under Heat Treatment On Cutting Tool Surface Using Fourier-Transform Infrared Spectroscopy (Ftir), MATERIALS SCIENCE FORUM, TRANS TECH PUBLICATIONS LTD, SWITZERLAND , 3, 98, ISSN:16629752
Kamaruddin Kamdani *, Sulaiman Hasan, Ahmad Farid Irfan Ahmad Ashaary, Mohd Amri Lajis,
(2019) Study On Tool Wear And Wear Mechanisms Of End Milling Nickelbased Alloy, JURNAL TRIBOLOGI 21 (2019) 82-92, MALAYSIAN TRIBOLOGY SOCIETY , 1, 82, ISSN:22897232
K. Kamdani, A.A. Hamsah, N.H. Rafai, M.Z. Rahim, C.K. Wong and Y.L. Chong
(2018) Study Of Cutting Force And Surface Roughness On Drilling Stainless Steel 316l Under Various Coolant Condition, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 11, 116, ISSN:1662-979
Amiril Sahab Abdul Sani, Erween Abd Rahim, Norfazillah Talib, Kamaruddin Kamdani, Mohammad Zulafif Rahim, Syahrullail Samion
(2017) Performance Evaluation Of Palm-Olein Tmp Ester Containing Hexagonal Boron Nitride And An Oil Miscible Ionic Liquid As Bio-Based Metalworking Fluids, JOURNAL OF MECHANICAL ENGINEERING, UITM , 10, 223, ISSN:18235514
Kamaruddin Kamdani, Azriszul Mohd Amin and Thoufeili Taufek
(2016) Evaluation Of Porosity In Metal Injection, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN Journal of Engineering and Applied Sciences , 9, 11188, ISSN:18196608
Prosiding / Seminar
K Kamdani, I Ashaary , S Hassan and M A Lajis
(2019) The Effect Of Cutting Force And Tool Wear In Milling Inconel 718, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
K. Kamdani, S. Hasan, A.F.I. Ahmad and M.A. Lajis
(2018) Study On Tool Wear And Wear Mechanism When End Milling Inconel 718 Using Tialn Coated Carbide, MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS) , 330, ISBN:9789671362525
Kamaruddin Bin Kamdani
(2012) Tool Wear Performance Of Tialn/Alcrn Multilayer Coated Carbide Tool In Machining Of Aisi D2 Hardened Steel, ICKEM 2012
Kamaruddin Bin Kamdani
(2008) Study Of Surface Roughness On Induction Hardened Steel Using Cbn Cutting Tool
Kamaruddin Bin Kamdani
(2008) The Effect Of Drill Point Geometry And Drilling Technique On Tool Life When Drilling Titanium Alloy, Ti-6al-4v
Kamaruddin Bin Kamdani
(2007) An Investigation Of Multi-Roller Burnishing Process On Mild Steel And Copper Metal
Kamaruddin Bin Kamdani
(2007) Application Of Taguchi Method To Study The Surface Roughness And Tool Wear By Turning Process
Kamaruddin Bin Kamdani
(2007) High Speed Drilling Ti6al4v
Kamaruddin Bin Kamdani
(2007) Investigation Of Chip Formation In Milling Titanium Alloy
Kamaruddin Bin Kamdani
(2007) Optimizing Surface Roughness And Flank Wear On Hard Turning Process Using Taguchi Parameter Design
Kamaruddin Bin Kamdani
(2007) Study On Cutting Forces, Chip Formation And Vibration When High Speed Drilling Titanium Alloy
Kamaruddin Bin Kamdani
(2007) Tool Wear And Surface Roughness In Turning Aisi 8620 Using Coated Ceramic Tool
Kamaruddin Bin Kamdani
(2006) Cutting Forces And Chip Formation In Drilling Titanium Alloys
Kamaruddin Bin Kamdani
(2005) Workpiece Preheating Approach To Reduce Chatter And Improve Machinability Of Titanium Alloy - Ti6al4v
Kamaruddin Bin Kamdani
(2004) Effect Of Workpiece Preheating On Machinability Of Titanium Alloys
Kamaruddin Bin Kamdani
(2004) Improvement Of Machinability Of Titanium And Its Alloys

Supervision

YearDescriptionRole
2011 The Universal Tool Wear Measurement Fixture for Turning Operation, Rahmah Wati binti Omar, BSME, UTHM. Supervisor
2011 Developing Tool Wear Measurement Fixture for Milling Operation, Marzilah binti Yaacob, BSME, UTHM. Supervisor
2011 Designing Tool Holder Fixture for Tool Wear Measurement for Milling Operation, Maisarah binti Othman, BSME, UTHM. Supervisor
2011 Study Effect Of Chip And Vibration when Milling Inconel 718 using TIN and TiAlN Coated Carbide, Muhamad Aimran bin Suhaimi, BSME, UTHM. Supervisor
2011 Comparison of Surface Roughness in Turning Operation, Ahmad Lotfi bin Halis, BSME, UTHM. Supervisor
2011 Comparison of Surface Roughness in Milling Operation, Mohamad Rizal bin Razali, BSME, UTHM. Supervisor
2011 The Effect of TiAlN and TiN Coating when Milling Inconel 718, Roslan bin Aziz, BSME, UTHM. Supervisor
2010 Turning Hardened Steel (SCM440) using Polycrystalline Cubic Boron Nitride (PCBN) and TiN Coated Cemented Carbide, Nur Kamilah binti Yusof, BSME, UTHM. Supervisor
2010 Comparison Between The Performance of PCBN and Carbide Tool in Hardened Steel Turning operation, Sia Chai Fuat, BSME, UTHM. Supervisor
2010 The Effects of TiAlN Coated Carbide Inserts in Milling Hardened JIS SKD11 Cold Work Steel, Ooi Chwee Hoon, BSME, UTHM. Supervisor
2009 Effect Ball Nose End Milling on Depth of Cut and Vibration in High Speed Machining (Dry), Hamizan bin Mamat Ahmad, BSME, UTHM. Supervisor
2009 Effect Ball Nose End Milling on Depth of Cut and Vibration in High Speed Machining (Mist Coolant), Mohd Fadzli bin Jamal Mohd Nasir, BSME, UTHM. Supervisor
2009 Penggunaan Tempurung Kelapa dalam Pembuatan Deras, Malyanah binti Mazni, BSME, UTHM. Supervisor
2009 Analysis for Optimal Mould Design of Plastic Injection Molding Using CadMould 3D-F Software, Siti Zuraidah binti Mohammad Zaini, BSME, UTHM. Supervisor
2008 The Effect of Drill Point Geometry on the Tool Wear, Tool Life and Thrust Force when High Speed Drilling Titanium Alloy, Lua Chee Aun, BSME, UTHM. Supervisor
2008 Study on Tool Wear and Surface Roughness in End Milling of Inconel 718 with Coated Carbide Insert, Ahmad Nazwan bin Mohd Sarbini, BSME, UTHM. Supervisor
2008 High Speed Drilling of Titanium Alloy: Effect on Cutting Force, Tool Life and Tool Wear use 3F Carbide Core Drill, Muhammad Shukri bin Saari, BSME, UTHM. Supervisor
2008 Investigation on the Effect of Drill Geometry on Tool Life, Tool Wear, Thrust Force and Torque in Drilling Ti-6Al-4V, Ibrahim bin Mutalip, BSME, UTHM. Supervisor
2008 High Speed Drilling of Titanium Alloys, Moses Augustine Ulik, BSME, UTHM. Supervisor
2008 Study on Vibration and Chip Formation in Milling of Inconel 718, Amir Syafiq bin Kamarunzaman, BSME, UTHM. Supervisor
2008 Drilling Titanium Alloy: Study on Chip Formation, Vibration and Surface Integrity, Mohd Faiz bin Mohd Nazir, BSME, UTHM. Supervisor
2008 Milling of Inconel 718 by Using Coated TiCN Insert in Dry and Mist Coolant Condition, Mohd Hidayat bin Daud, BSME, UTHM. Supervisor
2007 Kajian Prestasi Mata Alat Tertentu Mesin Larik, Mohd Razi bin Hassan, BSME, UTHM. Supervisor
2007 A Study on the Chip Formation and Surface Integrity when Machining Titanium Alloy (Ti-6Al-4V), Noor Aznida binti Abdul Aziz, BSME, UTHM. Supervisor
2007 Investigation of Chip Formation and Surface Integrity in Milling Titanium, Muhammad Fitri bin Abdullah, BSME, UTHM. Supervisor
2007 A Study on the Performance of WC-Co Uncoated when End Mill Inconel 718 in Dry Condition, Mohd Noor Hairil bin Mohd Yusof, BSME, UTHM. Supervisor
2007 Study of Vibration and Surface Roughness in Milling Inconel 718 with TiAlN coated in Dry Condition, Mohd Affendi bin Kasmin, BSME, UTHM. Supervisor
2007 Milling of Inconel 718 by Using Uncoated WC-Co insert in the Dry Condition, Mohd Aratah bin Abdul Latif, BSME, UTHM. Supervisor
2007 Study of Cutting Force and Tool Wear in End Milling Inconel 718 with Coated Carbide Inserts in Dry Condition, Ashrul Riezal bin Asbar, BSME, KUiTTHO. Supervisor
2007 Relationship between Chip Formation and Surface Integrity in Milling of Hardened Steel, Norazlan bin Abdullah, BSME, UTHM. Supervisor
2006 Kesan Pemotongan Kering Terhadap Kehausan Mata Alat dan Kekasaran Pemukaan Akhir dalam Pemesinan Kelajuab Tinggi (HSM) bagi Logam Aloi Titanium, Mohd Mustaffa bin Yaacob, BSME, KUiTTHO. Supervisor
2006 Analysis of Cutting Force Effect when Milling Titanium Alloy (TI-6Al-4V) using Uncoated and Coated Carbide Insert, Mohammad Zainal Akmal bin Ismail, BSME, KUiTTHO. Supervisor
2006 Study on Hood Hinge in Automotive System, Goh Nee Yi, BSME, KUiTTHO. Supervisor
2006 Kesan Pemotongan Kering terhadap Daya Pemotongan dalam Pemesinan Kelajuan Tinggi (HSM) bagi Logam Aloi Titanium, Mohd Baharuddin bin Mohd Yusof, BSME, KUiTTHO. Supervisor
2006 Performance of WC-Co Tools when Milling Titanium Alloys (Ti-6Al-4V), Nor Zalfarita binti Muhammad Nor, BSME, KUiTTHO. Supervisor
2006 Evaluation of Flank Wear and Surface Roughness when Milling Titanium Alloy (TI-6Al-4V) using Coated and Uncoated Carbide Insert, Zulkarain bin Ramli, BSME, KUiTTHO. Supervisor
2006 Performance of WC-Co Tools when Milling Titanium Alloys (Ti-6Al-4V), Mohd Faizal bin Azmi, BSME, KUiTTHO. Supervisor
2006 Kesan Pemotongan Basah pada Kehausan Mata Alat dan Kekemasan Permukaan Semasa Pemesinan Kelajuan Tinggi (HSM) Logam Aloi Titanium, Muhammad Hafiz bin Afraizal, BSME, KUiTTHO. Supervisor
2005 Kajian mengenai Pengaruh Kajian Suapan dan Kelajuan Pemotongan ke atas Daya Pemotongan semasa Proses Pengisar Hujung, Zulizudin bin Othman, BSME, KUiTTHO Supervisor

Courses & Training

YearDescription
Organiser / Venue		Date
2021 INDUSTRIAL TALK: CURRENT TRENDS OF MANUFACTURING AEROSPACE INDUSTRY
UTHM / Online streaming (Zoom) 		30/06/2021
2021 KURSUS ADOBE INDESIGN AND MANAGING PDF FILES
UTHM / Secara dalam talian: Zoom Meeting 		12/04/2021
2021 TAKLIMAT CEO@FACULTY BERSAMA YBHG. DATO' DR. MOHD SOFI BIN OSMAN - COVID AND ITS IMPACT ON SEMICONDUCTOR INDUSTRY
UTHM / ZOOM MEETING 		15/03/2021
2021 MYFKMP VIRTUAL INDUSTRIAL TALK SERIES: MALAYSIA AEROSPACE INDUSTRY OUTLOOK AND DEVELOPMENT POLICY
FKMP,UTHM / Online streaming (Zoom) 		21/01/2021
2020 PROGRAM PENUTUP BULAN BAHASA KEBANGSAAN UTHM 2020
UTHM / - 		22/10/2020
2020 KURSUS FUN ONLINE CLASSROOM WITH QUIZIZZ (LIVE SESSION)
UTHM / - 		23/06/2020
2019 10TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2019 (ICME2019)
FKMP,UTHM / Mudzaffar Hotel, Ayer Keroh, Melaka 		29/08/2019 - 30/08/2019
2019 KURSUS AEROSPACE STANDARD AS9100 AWARENESS
FKMP,UTHM / BILIK TUTORIAL 3, PERPUSTAKAAN TUNKU TUN AMINAH, UTHM 		24/06/2019
2019 TALK SERIES : CHARTERED ENGINEER - IMECHE
UTHM / UTHM 		23/04/2019

« Back