Staff Profile
| Full Name | Dr. MOHD FAISAL BIN HUSHIM |
|---|---|
| Faculty | FAKULTI TEKNOLOGI KEJURUTERAAN |
| Department | JABATAN TEKNOLOGI KEJURUTERAAN MEKANIKAL |
| Designation | DS51 - PENSYARAH KANAN |
|
TIMBALAN PENGETUA 1 (KOLEJ KEDIAMAN KAMPUS PAGOH) BAHAGIAN PENTADBIRAN PUSAT PERUMAHAN PELAJAR |
Field of Expertise
| Field Category (KPT) | ENGINEERING AND TECHNOLOGY |
|---|---|
| Field (KPT) | Mechanical Engineering |
| Field of Specialization (KPT) | Combustion and Fuels |
Areas of Research Interest
| 1. | Small Engine Technology |
| 2. | Engine Performance Simulation - GT-Suite |
| 3. | Emissions and Thermal Pollution Control |
| 4. | Thermoelectric Power Generator |
| 5. | Combustion and Performance of Internal Combustion Engine |
| 6. | Electrical Energy Management |
Innovation Field of Interest
| 1. | Design and development of novel thermal power generator kit from thermal waste |
| 2. | Clean/Green Technology |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2014 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2008 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2002 | SC/MCE/SPM/SPVM | SEK. MEN. TEKNIK SUNGAI BULOH |
Professional Appointments
| DS51 - Pensyarah Kanan |
Management Experience
| Date | Description |
|---|---|
| 01/02/2022 - 31/01/2024 | Timbalan Pengetua 1 (Kolej Kediaman Kampus Pagoh)
Pusat Perumahan Pelajar, Bahagian Pentadbiran |
| 01/09/2021 - 31/08/2022 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 2, Unit Pentadbiran |
| 01/06/2020 - 31/05/2022 | Ketua Kumpulan Fokus (FG)
Fakulti Teknologi Kejuruteraan, Automotive and Combustion Synergies Technology Group (ACST) |
| 01/06/2020 - 31/05/2022 | Penyelidik Utama
Fakulti Teknologi Kejuruteraan, Automotive and Combustion Synergies Technology Group (ACST) |
| 01/05/2021 - 31/01/2022 | Ketua Pusat
Fakulti Teknologi Kejuruteraan, Centre of Automotive & Powertrain Technology (CAPT) |
| 01/09/2020 - 31/08/2021 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 2, Unit Pentadbiran |
| 01/09/2019 - 31/08/2020 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 2, Unit Pentadbiran |
| 01/09/2018 - 31/08/2019 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 2, Unit Pentadbiran |
| 01/09/2017 - 31/08/2018 | Felo Kolej Kediaman
Kolej Kediaman Pagoh 2, Unit Pentadbiran |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 31/01/2013 - 31/01/2014 | Society of Automotive Engineers (SAE International)
| Ahli | Antarabangsa |
| 31/01/2016 - 31/01/2017 | Society of Automotive Engineers (SAE International)
| Ahli | Antarabangsa |
| 01/01/2015 - 31/12/2015 | Society of Automotive Engineers (SAE International)
| AHLI | Antarabangsa |
| 11/01/2012 - 31/12/2013 | Society of Automotive Engineers (SAE International)
| Ahli Bersekutu | Antarabangsa |
| 05/02/2017 - 31/07/2018 | Society of Automotive Engineers (SAE International)
| Ahli | Antarabangsa |
| 01/01/2014 - 31/12/2014 | Society of Automotive Engineers (SAE International)
| AHLI | Antarabangsa |
| 01/01/2011 - 31/12/2011 | The Institution of Engineers, Malaysia (IEM)
| GRADUATE MEMBERSHIP | Kebangsaan |
| 10/12/2010 - 10/11/2011 | The Institution of Engineers, Malaysia (IEM)
| GRADUATE MEMBERSHIP | Kebangsaan |
| 25/05/2010 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2016 | Matematik Kejuruteraan II (Engineering Mathematics II) [BWM10203], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Matematik Kejuruteraan II (Engineering Mathematics II) [BDA14103], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Kajian & Pengurusan Tenaga (Energy Study & Management) [MDT10404], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Matematik Kejuruteraan II (Engineering Mathematics II) [BDA14103], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Pemindahan Haba (Heat Transfer) [BDA30603], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Matematik Kejuruteraan II (Engineering Mathematics II) [BWM10203], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Kajian & Pengurusan Tenaga (Energy Study & Management) [MDT10404], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Matematik Kejuruteraan II (Engineering Mathematics II) [BDA14103], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2014 | Pemindahan Haba (Heat Transfer) [BDA3063], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Pemindahan Haba (Heat Transfer) [BDA30603], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Research Methodology [MDU10100], Sesi 20132014, Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Pemindahan Haba (Heat Transfer) [BDA30603], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Matematik Kejuruteraan II (Engineering Mathematics II) [BDA14103], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Matematik Kejuruteraan II (Engineering Mathematics II) [BWM10203], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Matematik Kejuruteraan II (Engineering Mathematics II) [BWM10203], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2014 | Matematik Kejuruteraan II (Engineering Mathematics II) [BDA14103], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 | University |
| 2013 | Matematik Kejuruteraan II (Engineering Mathematics II) [BDA14103], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 | University |
| 2010 | Amalan Kejuruteraan Mekanikal IV (Mechanical Enginering Practice IV) [BDA2811], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Makmal Kejuruteraan VI (Engineering Laboratory VI) [BDA3711], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2009 | Amalan Kejuruteraan Mekanikal III (Mechanical Engineering Practice III) [BDA2801], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
| 2009 | Makmal Kejuruteraan V (Engineering Laboratory V) [BDA3701], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
| 2009 | Termodinamik (Thermodynamics) [DDA2033], Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
Research Grants And Contracts
Publications
| Book Chapters |
|---|
| Helmi Faidzi Zainal, Brandon Vico Francis, Amir Khalid , Mohd Faisal Hushim, Zuraidah Ngadiron (2020) Research On Mixture Motion And Combustion Chamber Of Internal Combustion Engine, Fuel, Automotive And Engine Technology Series 3 , UTHM , 83, ISBN:9789672916321 |
| Ahmad Izuddin Zainal, Muhammad Aziq Afnan Roslan, Amir Khalid, Abd Fathul Hakim Zulkifli, Mohd Faisal Hushim, Norshuhaila Mohamed Sunar (2019) Biofuels From Algae: Challenges And Potential, Fuel, Automotive And Engine Technology Series 2 , UTHM , 113, ISBN:9789672306351 |
| Wan Syafiq Wan Syamsulbahri, Akmal Danial Kamarul Suhaimy, Amir Khalid, Abd Fathul Hakim Zulkifli, Mohd Faisal Hushim, Izzuddin Zaman (2019) Research Of The Implementation Of Fuel Additive In Internal Combustion Engine, Fuel, Automotive And Engine Technology Series 2 , UTHM , 59, ISBN:9789672306351 |
| Aqillah Shamsuddin, Syikin Salleh, Amir Khalid, Mohd Faisal Hushim, Izuan Amin Ishak, Mohamed Ihsan Sabri Mohamed Nazar (2019) Technologies For Reducing Emission From Gasoline And Diesel Engine, Combustion Control Strategies Internal Combustion Engines Series 4, UTHM , 135, ISBN:9789672306368 |
| Mohd Azahari Razali, Azwan Sapit Akmal Nizam Mohammed, Mohd Faisal Hushim, Azmahani Sadikin, Md Norrizam Mohmad Ja'at, Hazahir Peraman, Mirnah Suardi (2018) Flame Spread Behavior Over Kenaf Fabric, Polyester Fabric, And Kenaf/Polyester Combined Fabric, Engineering Applications For New Materials And Technologies, Springer, Cham , 67, ISBN:9783319726977 |
| Sapit A., Razali M.A., Mohammad A.N., Hushim M.F., Sadikin A.B., Jaat M.N.B.M. (2018) Investigation Of The Piston Bowl Shape Effect On The Diesel Spray Development , Engineering Applications For New Materials And Technologies , Springer Verlag , 197, ISBN:9780018698444 |
| Syazwan Onn, Ikhwan Hamizan Jamaluddin, Amir Khalid, Norrizam Jaat, Mohd Faisal Hushim, Bukhari Manshoor, Izzuddin Zaman (2018) Occupational Safety And Health : Laboratory And Classroom, Occupational Safety And Health - Case Study Series 1, UTHM , 91, ISBN:9789672216186 |
| Mohamad Shafiq Mohd Johari, Muhd Dinsyafiq Mazelan, Amir Khalid, Mohd Faisal Hushim, Muhammad Asri Azizul (2018) Studies On Dual Fuel (Gas & Liquid) Engine Performance And Exhaust Emission , Fuel, Automotive And Engine Technology Series 1, UTHM , 99, ISBN:9789672216193 |
| Muhammad Fauzi Kamis, Mohd Shamsul Bahari Noorzan, Amir Khalid, Nofrizalidris Darlis, Mohd Faisal Hushim (2018) Technology And Research In Common Rail System , Fuel, Automotive And Engine Technology Series 1, UTHM , 83, ISBN:9789672216193 |
| Mohd Faisal Hushim, Mohammad Kamil Abdullah, Mas Fawzi Mohd Ali, Bukhari Manshoor, Amir Khalid, Shahrul Azmir Osman, Md.Nor Anuar Mohamad (2017) A Comprehensive Reciprocating Piston Expansion Approach In Determination Of Low Temperature Heat Recovery Effectiveness In Organic Rankine Cycle, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 2, UTHM , 85, ISBN:9789670764962 |
| Mohd Azahari Razali, Ahmad Jais Alimin, Mas Fazwi Mohd Ali, Amir Khalid, Azwan Sapit, Bukhari Manshoor, Faisal Hushim, Akmal Nizam Mohamed (2017) Exploration The Effect Of Particle Size In Thermophoresis Phenomenon Under Microgravity Environment, Recent Research And Developments In Centre For Energy And Industrial Environment Studies Series 1, UTHM , 35, ISBN:9789670764955 |
| General Publications |
| Mohd Faisal Hushim (2022) Pelajar Uthm Prihatin, Derma Darah Di Bulan Ramadan, UTHM , -, ISBN:- |
| Mohd Faisal Hushim (2022) Program 'Curahan Amal Bakti Mahasiswa' Rapatkan Hubungan Uthm-Komuniti Pulau Perhentian, UTHM , -, ISBN:- |
| Mohd Faisal Hushim, Muhammad A'imullah Abdullah (2022) Sukarelawan Uthm Anjur Program Bentuk Pemimpin Muda Berkaliber, UTHM , -, ISBN:- |
| Dr. Rais Hanizam bin Madon, Dr Zamri bin Noranai, Dr Mohd Azahari bin Razali, Dr. Mohd Faisal bin Hushim, En. MZahar bin Abd Jalal (2020) Laporan Akhir: Demand-Driven Innovation Project By Public-Private Research Network (Pprn) Batik Processing Machine, UTHM , -, ISBN:- |
| Dr. Rais Hanizam bin Madon, Ts. Dr. Zamri bin Noranai, Dr. Mohd Azahari bin Razali, Dr. Mohd Faisal bin Hushim, En. MZahar bin Abd Jalal (2020) Sop Of Batik Machine, UTHM , -, ISBN:- |
| Dr. RAIS HANIZAM BIN MADON, Dr. HAMIDON BIN SALLEH, Dr. MOHD AZAHARI BIN RAZALI, Dr. MOHD FAISAL BIN HUSHIM, PROF. MADYA Dr. SHAHRUL AZMIR BIN OSMAN, PROF. MADYA Dr. AHMAD JAIS BIN ALIMIN, ENCIK MZAHAR BIN ABD. JALAL, (2020) Sop Of Mobile Disinfection Chamber, UTHM , -, ISBN:- |
| Dr. Rais Hanizam bin Madon, Dr. Mohd Faisal bin Hushim, Dr. Mohd Azahari bin Razali, Dr. Hamidon bin Salleh, En. MZahar bin Abd Jalal, En. Muhamad Khairul Ilman bin Sarwani (2020) Sop Of Roselle Juice Machine, UTHM , -, ISBN:- |
| Dr. Rais Hanizam bin Madon, Dr. Balkis binti Haji A.Talip, Tc. MZahar bin Abd Jalal, Dr Mohd Azahari bin Razali, Dr. Hamidon bin Salleh, Dr. Mohd Faisal bin Hushim, Prof Madya Dr. Ahmad Jais Alimin, Prof. Madya Ts. Dr. Saifulnizan bin Jamian, En. Muhamad Khairul Ilman Sarwani , En. Muhamad Muizzuddin bin Abdul Kadir. (2020) Standard Operating Procedure Of Mobile Covid19 Sample Collection Cubicle, UTHM , 1, ISBN:- |
| Sustainable Campus Office (SCO) & Sustainable Champion Team (SIO 1-8) (2018) Uthm-Ui Greenmetric World University Ranking 2018 , UTHM , -, ISBN:- |
| Journal |
| DR AHMAD SHARIFUDDIN BIN MUSTAPHA (2022) Penerapan Amalan Kerohanian Untuk Mengatasi Masalah Emosi Dan Tingkah Laku Semasa Tempoh Pandemik Covid-19, AL HIKMAH INTERNATIONAL JOURNAL OF ISLAMIC STUDIES AND HUMAN SCIENCES, AL HIKMAH INTERNATIONAL JOURNAL OF ISLAMIC STUDIES AND HUMAN SCIENCES , 2, 80, ISSN:2637-058 |
| Mohd Azahari Razali, Rais Hanizam Madon, Md Norrizam Mohmad Ja?at, Azwan Sapit, Hamidon Salleh, Mohd Faisal Hushim, Waseem Alwan Zaboon, Muhammad Fauzi Samsubaha (2020) Investigation Of Diesel Injector Flow Pattern Based On Computer-Aided Design, CFD LETTERS, AKADEMIA BARU , 5, 13, ISSN:21801363 |
| Chua Bing Liang, Akmal Nizam Mohammed, Azwan Sapit, Mohd Azahari Razali, Mohd Faisal Hushim, Amir Khalid, Nurul Farhana Mohd Yusof (2020) Numerical Simulation Of Aerofoil With Flow Injection At The Upper Surface, CFD LETTERS, THE AKADEMIA BARU PUBLISHING (M) SDN. BHD. , 1, 98, ISSN:21801363 |
| Mohd Faisal Hushim (2020) Single Parameter Engine Analysis And Performance Optimization Of A Medium Duty Gasoline Engine, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, INSTITUTE OF PHYSICS PUBLISHING , 6, 012003, ISSN:00000000 |
| Zainul Ameerul Ikhsan Zainul Abidin, Mohd Faisal Hushim, Ahmad Jais Alimin, Akmal Nizam Mohhamed, Mohd Azahari Razali, Azwan Sapit, Mzahar Abd Jalal (2019) A Review On Development Of A Lab Scaled Hybrid Vehicle System For Small Gasoline Engine, OP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 1, 012063, ISSN:17578981 |
| mohd azahari bin razali,mohd.faisal hushim,amirkhalid,azwan sapit,norrizam mohd jaat (2019) Effect Of Acoustic Excitation Toward Jet Flame: An Experimental Design, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, akademia baru , 1, 69, ISSN:22897879 |
| Razali M.A., Sapit A., Batcha M.F.M., Madon R.H., Khalid A., Ja'at M.N.M., Mohammed A.N., Salleh H., Hushim M.F., Hadi U.A. (2019) Preliminary Study Of Effect Of Natural Thread Distance On Angle Dependency Of Flame Spread Behaviour Over Kenaf/Polyester Fabric, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, PENERBIT AKADEMIA BARU , 250, ISSN:22897879 |
| Sapit A.B., Razali M.A.B., Mohammed A.N.B., Manshoor B.B., Khalid A.B., Salleh H.B., Hushim M.F.B. (2019) Study On Mist Nozzle Spray Characteristics For Cooling Application, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 299, ISSN:2229838X |
| MNA Mohamad, MF Hushim, WNAW Muhammad, A Razali, A Khalid, and MF Zakaria (2017) Performance Measurement Of A New Concept Reciprocating Piston Expander (Rpe) Using A Newly Developed Small-Scale Dynamometer Unit, MATEC WEB OF CONFERENCES, MATEC Web of Conferences , 11, 1, ISSN:2261236X |
| Azwan Sapit, Mohd Azahari Razali, Mohd Faisal Hushim, Norrizam Jaat, Akmal Nizam Mohammad, Amir Khalid (2017) Comparision On Dynamic Behavior Of Diesel Spray And Rapeseed Oil Spray In Diesel Engine, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 4, 1, ISSN:17426588 |
| S H Amirnordin, A Khalid, M Suardi, B Manshoor and M F Hushim (2017) Effects Of Fractal Grid On Spray Characteristics And Flame Development In Burner Combustion, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 4, 1, ISSN:17426588 |
| Akmal Nizam Mohammed, Mohd Azahari Razali, Azwan Sapit, Mohd Faisal Hushim, Shahrul Azmir Osman, and Mohamad Farid A. Rahman (2017) Numerical Study Of Variable Length Exhaust Pipe In Small Engine, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 4, 2374, ISSN:18196608 |
| Mohd Faisal Hushim, Ahmad Jais Alimin, Mohd Azahari Razali, Akmal Nizam Mohammed, Azwan Sapit, and Julio Cesar Mendez Carvajal (2016) Air Flow Behaviour On Different Intake Manifold Angles For Small 4-Stroke Pfi Retrofit Kit System, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7565, ISSN:18196608 |
| Md. Nor Anuar Mohamad, Bukhari Manshoor, Mohd Faisal Hushim, Shahrin Hisham Amirnordin and Wan Nur Azrina Wan Muhammad (2016) Development Of Twin Piston Expander With Solenoid Valve For Organic Rankine Cycle, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN Journal , 9, 11154, ISSN:18196608 |
| Amir Khalid, Mohd Azahari Bin Razali, Azwan Bin Sapit, Mohd Faisal Bin Hushim, Suzuki Masataro, Masuda Wataru (2016) Flame Spread Behavior Over Combined Fabric Of Cotton/Polyester, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN). , 6, 7553, ISSN:1819-6608 |
| azahari (2016) Flame Spread Behavior Over Combined Fabric Of Cotton/Polyester , ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , Asian Research Publishing Network (ARPN) , 6, 7553, ISSN: 1819-6608 |
| Azwan Sapit, Akmal Nizam Mohammed, Mohd. Azahari Razali, Mohd Faisal Bin Hushim, Amir Khalid and Bukhari Manshoor (2016) Rapeseed Oil Spray Development Of Diesel Idi Spray Nozzle Under Air Movement Influence, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 1, 11183, ISSN:18196608 |
| Mas Fawzi, Norrizal Mustaffa, Mohd Faisal Hushim, and Shahrul Azmir Osman (2015) Application Of Injector-Volume Ratio Values In The Development Of A Fuel Injection Controller, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 7, 595, ISSN:16627482 |
| Azwan Sapit, Mohd Azahari Razali, Mohd Faisal Hushim, M. Jaat, Akmal Nizam Mohammad and Amir Khalid1, (2015) Dynamic Behavior Of Rapeseed Oil Spray In Diesel Engine , APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 520, ISSN:1660-9336 |
| Mohd Taufiq Muslim, Hazlina Selamat, Ahmad Jais Alimin, Noorfaizah Mohd Rohi, Mohd Faisal Hushim (2014) A Review On Retrofit Fuel Injection Technology For Small Carburetted Motorcycle Engines Towards Lower Fuel Consumption And Cleaner Exhaust Emission , RENEWABLE AND SUSTAINABLE ENERGY REVIEWS, Elsevier , 7, 279, ISSN:13640321 |
| Mohd Faisal Hushim, Ahmad Jais Alimin, Hazlina Selamat, and Mohd Taufiq Muslim (2013) Pfi System For Retrofitting Small 4-Stroke Gasoline Engines, INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND DEVELOPMENT, IACSIT Press , 8, 375, ISSN:20100264 |
| Media Digital |
| Mohd Faisal Hushim (2021) Keynote Speech 3rd Icstr Istanbul 2021 - Impact Of Aggressive Driving Behaviour To Vehicle Fuel Consumption And Tailpipe Emissions, YouTube , ISBN:- |
| Mohd Faisal Hushim (2021) Keynote Speech 4th Icstr Rome, 2021 - Impact Of Aggressive Driving Behaviour To Vehicle Fuel Consumption And Tailpipe Emissions, YouTube , ISBN:- |
| Dr. Rais Hanizam bin Madon, Ts. Dr. Zamri bin Noranai, Dr. Mohd Azahari bin Razali, Dr. Mohd Faisal bin Hushim, En. MZahar bin Abd Jalal, En. Muhamad Khairul Ilman bin Sarwani (2020) Batik Processing Machine, Youtube , ISBN:- |
| Yew Xin Yu, Nurul Nadia Najwa Ramlan, Vrendon Inchana ak Suel, Muhamad Farhan Yusof, Muhammad Alif Z.yusri, Muhamad Akif Farhan Jamaludin, Mohd Faisal Hushim (2020) Intellectual Properties - Bnj10302 S1 20/21, YouTube , ISBN:- |
| Mohd Faisal Hushim (2020) Keynote Speech 2020 Novel Port Fuel Injection Retrofit System For Small Gasoline Engine, YouTube , ISBN:- |
| Mohd Faisal Hushim (2019) Creativity & Innovation - Montage For Projects Presentation Sem 1 19/20, YouTube , ISBN:- |
| Mohd Faisal Hushim, Mohamad Najmi Ramli, Mohamad Luqman Hakim Mohd Said, Mohamad Harizat Ahmad Jais, Muhammad Nabil Farhan Kamal, Mohammad Aidid Rahman (2019) Hydrogen As An Alternative & Advanced Fuel, YouTube , ISBN:- |
| Policy Paper |
| Mohd Faisal Bin Hushim (2021) Laporan Audit Tenaga Elektrik & Pembangunan Polisi Tenaga Bagi Lra Kelar Dan Chicha |
| Mohd Faisal Bin Hushim (2021) Laporan Teknikal Bagi Lra Kelar & Chicha |
| Mohd Faisal Bin Hushim (2020) Laporan Awal Audit Tenaga Elektrik Bagi Tahun 2020 |
| Mohd Faisal Bin Hushim (2019) Laporan Awal Audit Tenaga Elektrik Bagi Tahun 2019 |
| Mohd Faisal Bin Hushim (2019) Laporan Kajian Susulan Bagi Loji Rawatan Air Kelar & Loji Rawatan Air Chicha |
| Mohd Faisal Bin Hushim (2018) Laporan Awal Audit Tenaga Elektrik Bagi Tahun 2018 |
| Mohd Faisal Bin Hushim (2018) Technical Report Of Performance Investigation On Emission And Fuel Consumption Of Class Ii Vehicle |
| Mohd Faisal Bin Hushim (2017) Laporan Awal Audit Tenaga Elektrik Bagi Loji Rawatan Air Kelar & Loji Rawatan Air Chicha |
| Prosiding / Seminar |
| Muhammad Hanafi Bin Asril Rajo Mantari, Wan Noor Afifah Binti Wan Ahmad, Mohd Faisal Bin Hushim, Muhammad A'imullah Bin Abdullah & Muhammad Qusyairi Bin Abdul Rahman (2021) Pengendalian Dan Pengurusan Pelajar Di Kolej Kediaman Pagoh Sepanjang Tempoh Perintah Kawalan Pergerakan (Pkp) 2020, UNIVERSITI UTARA MALAYSIA , 93, ISBN:9789672644408 |
| Muhammad Hanafi Bin Asril Rajo Mantari, Wan Noor Afifah Binti Wan Ahmad, Mohd Faisal Bin Hushim, Muhammad A'imullah Bin Abdullah & Muhammad Qusyairi Bin Abdul Rahman (2021) Pengendalian Dan Pengurusan Pelajar Di Kolej Kediaman Pagoh Sepanjang Tempoh Perintah Kawalan Pergerakan 2020, STUDENT AFFAIRS DEPARTMENT, UNIVERSITI UTARA MALAYSIA , 93, ISBN:9789672644408 |
| Mohd Irham Anas, Amir Khalid, Norrizam Jaat, Norshuhaila Mohamed Sunar, Faisal Hushim, Azahari Razali, Azwan Sapit (2018) Investigation Of Combustion Process Of Biodiesel Derived From Waste Cooking Oil, Jatropha, Palm Oil And Algae Using Rapid Compression Machine, INSTITUTE OF PHYSICS PUBLISHING , 1 |
| Azwan Sapit, Mohd Azahari Razali, Mohd Faisal Hushim, Norrizam Jaat, Akmal Nizam Mohammad, Amir Khalid (2017) Comparision On Dynamic Behavior Of Diesel Spray And Rapeseed Oil Spray In Diesel Engine, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588 |
| Azwan Sapit, Mohd Azahari Razali, Akmal Nizam Mohammed,Mohd Faisal Hushim,Azmahani Binti Sadikin,Md Norrizam Mohmad Ja'at,Amir Khalid. (2017) Comparison On Piston Bowl Shape Effect To Diesel Spray Development, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| Amir Khalid,Norrizam Jaat,Mohd Faisal Hushim,Bukhari Manshoor,Izzuddin Zaman,Azwan Sapit,Azahari Razali (2017) Computational Fluid Dynamics Analysis Of High Injection Pressure Blended Biodiesel, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| Mohd. Azahari bin Razali, Azwan bin Sapit, Akmal Nizam Mohammed, Mohd Faisal Bin Hushim, Hamidon bin Salleh, and Hazahir bin Peraman (2017) Effect Of Thread Angle On Flame Spread Behaviour Over Combined Fabric Of Kenaf/Polyester, AIP PUBLISHING , 016, ISBN:9780735414990 |
| Mohd Azahari Razali, Sofian Mohd, Azwan Sapit, Akmal Nizam Mohammed,Ahmad Husaini Ismail, Mohd Faisal Hushim, Norrizam Jaat and Amir Khalid (2017) Flame Spread Behavior Over Combustible Thick Solid Of Paper, Bagasse And Mixed Paper/Bagasse, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| AKMAL NIZAM MOHAMMED, ABDUL RASYID DAUD, MOHAMMAD KAMIL ABDULLAH, SUZAIRIN MD SERI, MOHD AZAHARI RAZALI, MOHD FAISAL HUSHIM (2017) Numerical Study Of Canister Filters With Alternatives Filter Cap Configurations , IOP PUBLISHING , 012040, ISBN:1757899X |
| Mohd Azahari Razali, Azwan Sapit, Akmal Nizam Mohammed, Md Nor Anuar Mohamad1, Normayati Nordin, Azmahani Sadikin, Mohd Faisal Hushim, Norrizam Jaat and Amir Khalid (2017) Thread Angle Dependency On Flame Spread Shape Over Kenaf/Polyester Combined Fabric, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| Mirnah Binti Suardi , Mohd Azahari bin Razali, Amir bin Khalid, Hamidon bin Salleh, Azwan Sapit , Akmal Nizam bin Mohammed,Mohd Faisal bin Hushim (2016) Development For Thermophoresis Experimental Under Microgravity Condition, IOP Publishing , 1 , ISBN:1757-899X |
| Mohd Azahari Razali (2015) Air Flow Behaviour On Different Intake Manifold Angles For Small 4-Stroke Pfi Retrofit Kit System, Asian Research Publishing Network (ARPN) , ISBN: 18196608 |
| Mohd Faisal Hushim (2015) Development Of Twin Piston Expander With Solenoid Valve For Organic Rankine Cycle, ARPN , ISBN:18196608 |
| Mohd Faisal Bin Hushim (2012) Pfi Retrofit-Kit As Green Technology For Small 4-Stroke Si Engine, UTHM |
| Osman, Shahrul Azmir (2011) Application Of Green Technologies For Uthm In Realizing The Green Campus Concept, UTHM |
| Mohd Faisal Bin Hushim (2011) Effect Of Intake Manifold Angle Of Port-Fuel Injection Retrofit-Kit To The Performances Of An S.I. Engine, - |
| Mohd Faisal Bin Hushim (2011) Influence Of Fuel Injector Position Of Port-Fuel Injection Retrofit-Kit To The Performances Of Small Gasoline Engine, UTM |
| Mohd Faisal Bin Hushim (2011) Perodua Eco-Challenge 2010: Ideas Of Modification From Arg Uthm, Penerbit UTHM |
| Mohd Faisal Bin Hushim (2011) Port-Fuel Injection System For Small 4-Stroke Single Cylinder Engine: An Experimental Framework, UTHM |
| Mohd Faisal Bin Hushim (2011) Specific Fuel Consumption Of A Low Capacity Motorcycle When Fitted With A Retrofit Fuel Injection |
| Mohd Faisal Bin Hushim (2010) A Review And Investigation Framework On Port-Fuel Injection For Small 4-Stroke Single Cylinder Engine |
| Mohd Faisal Bin Hushim (2010) An Overview On Durability Study On A Retrofit Fuel Injection Kit During On-Road Testing, UTHM |
| Mohd Faisal Bin Hushim (2010) Performance Comparison Between Carburetor And Retrofit Fuel Injection System For An S.I. Engine |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2021 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jul - 31 Dec 2021. | Private |
| 2021 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jan - 30 Jun 2021. | Private |
| 2020 | Perunding bagi Pembangunan Sistem Jurnal Online 'Malaysia Correctional Journal', 09 Januari - 8 Jun 2020. | Government |
| 2020 | Perunding bagi Projek Kajian Penawaran dan Permintaan Tenaga Kerja Berasaskan Pendidikan dan Latihan Teknikal dan Vokasional (TVET) Negara bagi Bidang Automotif Selepas Jualan, 13 Julai - 13 Disember 2020. | Government |
| 2020 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jul - 31 Dec 2020. | Private |
| 2020 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jan - 30 Jun 2020. | Private |
| 2019 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jan - 30 Jun 2019. | Private |
| 2019 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jul - 31 Dec 2019. | Private |
| 2018 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jan - 30 Jun 2018. | Private |
| 2018 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 July - 31 Dec 2018. | Private |
| 2017 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 July - 31 Dec 2017. | Private |
| 2017 | Lead Consultant on Electrical Energy Management of Kelar and Chicha Water Treatment Plants, Air Kelantan Sdn. Bhd., 01 Jan - 30 Jun 2017. | Private |
| 2015 | Speaker to Rapidbus Advanced Engineering Training (Topic: Diesel Fuel Technology), Rapid Bus Sdn Bhd, 2015 | Private |
| 2015 | Leader for the project of Engine Performance and Emission Testing of an HCCI Engine, Felda Global Ventures Applied Technologies Sdn Bhd, 2015 | Private |
| 2013 | Expert Advisor for design and develop a Universal Adapter for a Retrofit Fuel Injection System, Universiti Teknologi Malaysia, under Research University Grant 01H84, 2013 | University |
| 2012 | Speaker for IKBNT TOT Workshop (Bengkel TOT Program Pembangunan Sijil Dan Diploma IKBN Temerloh), Course Title: Engine Management System (EMS), 05 - 07 November 2012. | Government |
| 2011 | Consultative for Development of Teaching Module under Institut Kemahiran Belia Negara Temerloh (IKBNT) Academic Consultation Project, 01 July 2011 - 31 December 2012. | Government |
Supervision
| Year | Description | Role |
|---|---|---|
| 2017 | Examiner for pre-viva thesis: Wan Fakhrurrazi W Abdul Rahman (14 Nov 2017): Performance and Emission of an Internal Combustion Engine using Ceramic and Metallic Catalytic Converter for Vehicle Exhaust | Examiner |
| 2017 | Co-supervisor for Nurul Hidayah Muslim, PhD, Universiti Teknologi Malaysia, 2017 - On-going | Supervisor |
| 2017 | Supervisor for Nik Hasanul Anwar Bin Ghani, Kajian Penggunaan dan Cadangan Penjimatan Tenaga Elektrik bagi Loji Rawatan Air di bawah pengurusan Air Kelantan Sdn.Bhd. - MSc, Universiti Tun Hussein Onn Malaysia, 2017 - On-going | Supervisor |
| 2016 | Assistant Chairman for viva voce session, Master of Mechanical Engineering, Mohd Syafiq Syazwan Bin Mustafa, 25 September 2016 | Referee |
| 2016 | Chairman for viva voce session, Master of Mechanical Engineering, Adiba Rhaodah Andsaler Binti Mohd Iskandar Andrew Abdullah, 01 November 2016 | Referee |
| 2016 | Supervisor for Zainul Ameerul ikhsan Bin Zainul Abidin, Development of a Lab Scaled Hybrid System for Personal Transport - MSc, Universiti Tun Hussein Onn Malaysia, 2016 - On-going | Supervisor |
| 2016 | Supervisor for Wan Muhammad Afiq Wan Rosli, Development of Thermal Power Generator Kit of an Automobile Engine - BEng, Universiti Tun Hussein Onn Malaysia, 2016 | Supervisor |
| 2016 | Supervisor for Mohd Faliq Muhammad Nor, Perubahan Prestasi Enjin Terhadap Campuran Bahan Api Yang Berlainan Pada Enjin Petrol - BEng, Universiti Tun Hussein Onn Malaysia, 2016 | Supervisor |
| 2015 | Supervisor for Fauzi Bin Ab. Ghafar, Driving Cycle for Small And Medium Duty Engines: Case Study of Ipoh - MEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Mohd Zaki Bin Zahari, Kesan Suhu Persekitaran Terhadap Prestasi Enjin Gasolin Berkapasiti Kecil Di Bawah 150 cc - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Muhammad Aminul Islam, Effects of Variable Length of Exhaust Manifold of a Small Engine - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Abdillah Bin Abd Nain, Pengaruh Parameter Paip Ekzos Terhadap Prestasi Enjin Motorsikal - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Muhammad Aiman Syazwan Bin Abu, Driving Cycle For Medium Duty Engine: Case Study of Batu Pahat - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Muhammad Fadhli Bin Hamid, Test Rig Development for Different Gasoline Fuel Injector - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Loh Seng Hong, Perbandingan Kajian Antara Sistem Suntikan Bahan Api Liang (PFI) Dengan Suntikan Bahan Api Terus (GDI) Untuk Sebuah Enjin Gasolin 125 cc - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Harif Bin Radzuan, Kesan Panjang Pancarongga Pengambilan Yang Berlainan Terhadap Prestasi Enjin Kecil Petrol Empat Lejang Satu Silinder - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Saifuldin Bin Midkal @ Abdul Hamid, Ramalan Prestasi Enjin Terhadap Panjang Boleh Ubah Pancarongga Ekzos Untuk Motosikal - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Mohd Helzee Bin Taib, Kajian Prestasi Oleh Kesan Kepelbagaian Suhu Persekitaran Terhadap Enjin Petrol Berkapasiti Kecil - BEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Mohamad Fuad Bin Abdul Aziz, The Effect of Ambient Temperature to the Performance of Internal Combustion Engine - MEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2015 | Supervisor for Mohd Rizan Bin Abdul, Performance Study on the Effect of Different Exhaust Length for Motorcycle Engine - MEng, Universiti Tun Hussein Onn Malaysia, 2015 | Supervisor |
| 2014 | Supervisor for Nik Mohamad Haniff Bin Mat Yaacob, Performance Study of a Small 4-Stroke Gasoline Engine Retrofitted With PFI System - BEng, Universiti Tun Hussein Onn Malaysia, 2014 | Supervisor |
| 2014 | Supervisor for Chen Yong Sun, Air and Fuel Mixture Characteristic of a Port Fuel Injection System for Small 4-Stroke Gasoline Engine - BEng, Universiti Tun Hussein Onn Malaysia, 2014 | Supervisor |
| 2014 | Supervisor for Osman Bin Ahmad, Kitaran Pemanduan Batu Pahat Untuk Enjin Berkapasiti Rendah - BEng, Universiti Tun Hussein Onn Malaysia, 2014 | Supervisor |
| 2013 | Co-Supervisor for Mohamad Zaki Bin Md Salleh, A Numerical Study on Air-Fuel Mixture Transportation to the Combustion Chamber Using Different Intake Manifold Angle of PFI System - BEng, Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Co-Supervisor for Mohd Syaffiq Bin Abdul Maulud, Simulation on Air and Fuel Flow Behavior of a Retrofit Port Fuel Injection System of Different Intake Manifold and Injector Angles - BEng, Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2012 | Co-Supervisor for Fahmi Othman, Comparative Study between Port Fuel Injection and Gasoline Direct Injection to be Retrofitted on 4-Stroke Engines - BEng, Universiti Tun Hussein Onn Malaysia, 2012 | Supervisor |
| 2012 | Co-Supervisor for Abdul Mu'iz Bin Mohamad Koldaie, Fuel Economy Characteristic of a Single Cylinder Spark Ignition Engine equipped with a Retrofit Fuelling Kit - BEng, Universiti Tun Hussein Onn Malaysia, 2012 | Supervisor |
| 2012 | Co-Supervisor for Yeoh Yeong Kai, GT-Suite Modeling of an Internal Combustion Single Cylinder Gasoline fuelled Engine using a Retrofit Fuel Injection Kit - BEng, Universiti Tun Hussein Onn Malaysia, 2012 | Supervisor |
| 2012 | Co-Supervisor for Mohd Firdaus Bin Othman, Power and Torque Stability of Small Gasoline Engine Operating using a Retrofit Fuel Injection Kit - BEng, Universiti Tun Hussein Onn Malaysia, 2012 | Supervisor |
| 2011 | Co-Supervisor for Mohd Khairul Zaimy B Abd Ghani, Kajian Simulasi dan Pengesahsahihan Penggunaan Sistem Penyuntik Bahan Api Enjin Gasolin 125 cc Menggunakan Perisian GT-Suite - BEng, Universiti Tun Hussein Onn Malaysia, 2011 | Supervisor |
| 2011 | Co-Supervisor for Mohd Farris Bin Mansor, Development of an Intake Manifold for Small 4-Stroke Gasoline Engine - BEng, Universiti Tun Hussein Onn Malaysia, 2011 | Supervisor |
| 2011 | Co-Supervisor for Muhammad Firdaus Bin Chamari, Pengaruh sudut penyuntik bahan api sistem suntikan bahan api retrofit kit pada sebuah enjin gasolin - BEng, Universiti Tun Hussein Onn Malaysia, 2011 | Supervisor |
| 2011 | Co-Supervisor for Mohd Taufik Bin Ngatman, Performances Comparison of Small Gasoline Engine Running Using Carburettor and Retrofit Fuel Injection Kit - BEng, Universiti Tun Hussein Onn Malaysia, 2011 | Supervisor |
| 2010 | Co-Supervisor for Nurul Syuhada Binti Ismail, Kajian simulasi ke atas enjin PERODUA Viva dengan menggunakan perisian GT-Suite untuk meningkatkan prestasi penjimatan minyak - BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Co-Supervisor for Maizatul Hafizah Binti Abdul Hamid, Kajian simulasi ke atas enjin nyalaan mampatan menggunakan aplikasi GT-Suite - BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2021 | Keynote Speaker for 3rd ICSTR Istanbul - International Conference on Science & Technology Research, Scientific & Technical Research Association (STRA), Istanbul, 07 - 08 October 2021. | International |
| 2021 | Reviewer, International Conference on Mechanical & Manufacturing Engineering 2021 (ICME2021), Manuscript No. 4886,"Thermal Characterization of Biofluids For Heat Transfer Fluid in Thermal Transport Technologies", 2021 | International |
| 2021 | Reviewer, International Conference on Mechanical & Manufacturing Engineering 2021 (ICME2021), Manuscript No. 5006,"Energy Saving Potential at Employees' Provident Fund Office Building", 2021 | International |
| 2021 | Reviewer, International Journal of Automotive and Mechanical Engineering (IJAME), "ICCEM Sound Intensity Mapping on Single Cylinder Direct Injection Diesel Engine with The Application of Palm Oil Methyl Ester Biodiesel", June 2021 | International |
| 2021 | Reviewer, International Journal of Power Electronics and Drive Systems (IJPEDS), Paper No. #1570694909, "Modeling and frequency influence for inductive power transfer for electric vehicle charging", 2021 | International |
| 2021 | Reviewer, International Journal of Automotive and Mechanical Engineering (IJAME), "Utilization of Chemical Waste Additives with Low Octane Commercial Gasoline Fuel to Enhance The Performance of SI Engines", March 2021 | International |
| 2021 | Reviewer, 2021 5th International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2021), Manuscript No. M008,"Research on flow field characteristics of nozzle plume for a solid rocket motor", 2021 | International |
| 2021 | Keynote Speaker for 4th ICSTR Rome - International Conference on Science & Technology Research, Scientific & Technical Research Association (STRA), Rome Italy, 09 - 10 September 2021. | International |
| 2020 | Reviewer, Mechanics Based Design of Structures and Machines, An International Journal, Manuscript No. LMBD-2020-0158, "Experimental Study on the Energy Consumption of Gasoline Engine Lubricating Pumps in Standardized Driving Cycles", 2020 | International |
| 2020 | Reviewer, 2020 4th International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2020), Manuscript No. M032,"Research on Mission Characteristics-based Evaluation Model of Flight Test Workload", 2020 | International |
| 2020 | Reviewer, 2021 5th International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2021), Manuscript No. M2103,"Analysis and improvement of mid and high frequency noise in a pure electric SUV", 2020 | International |
| 2020 | Honorary Technical Committee of STRA - Scientific & Technical Research Association | International |
| 2020 | Honorary Advisory Member of STRA - Scientific & Technical Research Association | International |
| 2020 | Reviewer, SAE International, International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility, Manuscript No. 20ADMMS-0213,"Energy Generating and Storing Body Panels (Roof) for electrical vehicles", 2020 | International |
| 2020 | Editorial Board Member of 2020 4th International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2020), Nagoya, Japan, 25 - 27 May 2020 | International |
| 2020 | Reviewer, 2020 4th International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2020), Manuscript No. M042,"Research on Flight Technique And Hazard Control for Civil Airplane Crosswind Flight Test", 2020 | International |
| 2020 | Reviewer, Environment, Development and Sustainability (Springer), Manuscript No. ENVI-D-20-00227, "Performance Evaluation of Parking Integrated Grid Connected PV System Located in Northern India", 2020 | International |
| 2020 | International Scientific Committee Member of 2020 4th International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2020), Nagoya, Japan, 25 - 27 May 2020 | International |
| 2019 | Reviewer, Propulsion and Power Research, Manuscript No. PPR-2019-0070, "Investigation of Spray Characteristics from Waste Cooking Oil, Bio-hydro fined diesel Oil (BHD) and n-tridecane in a Constant Volume Chamber", 2019 | International |
| 2019 | Reviewer, SAE International, International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility, Manuscript No. 19ADMMS-0195, "Simulation Analysis of Single-Phase Matrix Converter for Cycloconverter operation using SPWM with under and over modulation Technique", 2019 | International |
| 2019 | Keynote Speaker for 3rd ICSTR Malaysia - International Conference on Science & Technology Research, Scientific & Technical Research Association (STRA), Malaysia, 29 - 30 December 2019. | International |
| 2019 | Reviewer, IEEE Transactions on Industrial Electronics, Manuscript No. 18-TIE-4290, "Intelligent feature selection using GA and neural network optimization for real-time driving pattern recognition", 2019 | International |
| 2018 | Reviewer, 2018 2nd International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2018), Manuscript No. M010,"Weight Assessment for a Blended Wing Body-Unmanned Aerial Vehicle Implementing Boundary Layer Ingestion", 2018 | International |
| 2018 | Editorial Board Member and Technical Committee Member of 2018 2nd International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2018), Hanoi, Vietnam, 23 - 26 March 2018 | International |
| 2018 | Reviewer, SAE International, SAE World Congress Experience, Manuscript No. 18PFL-0972, "Equivalent Consumption Minimization Strategy for Power Split Hybrid Electric Vehicles", 2018 | International |
| 2018 | Reviewer, 9th International Conference on Mechanical and Manufacturing Engineering (ICME2018). | International |
| 2018 | Reviewer, 5th International Conference on Science & Social Research (CSSR 2018), Track: Green Technology & Sustainable Development, Manuscript No. 1570470904,"Diesel Engine run with Waste Cooking Oil (WCO) and Jatropha Biodiesel Blended Fuel", 2018 | International |
| 2017 | Honorary Chief Advisor of Scholarly association WASRTI: World Association for Scientific Research and Technical Innovation | International |
| 2017 | Keynote Speaker for 25th International Conference on Researches in Science and Technology (ICRST), Global Research & Development Services (GRDS), Malaysia, 17 - 18 November 2017. | International |
| 2017 | Editorial Board Member and Technical Committee Member of 2017 International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2017), Bangkok, Thailand, 21 - 23 April 2017 | International |
| 2017 | Reviewer, 2017 International Conference on Aerospace, Mechanical and Mechatronic Engineering (CAMME 2017), Manuscript No. E1003, 2017 | International |
| 2016 | Track Director (Automotive Engineering), 7th International Conference on Mechanical and Manufacturing Engineering (ICME2016). | International |
| 2016 | Reviewer, SAE International, WCX 17: SAE World Congress Experience, Manuscript No. 17AE-0069, "Integration of OpenADR with Node-RED for Demand Response Load Control Using Internet of Things Approach", 2016 | International |
| 2016 | Keynote Speaker for 12th International Conference on Researches in Science and Technology (ICRST), Global Research & Development Services (GRDS), Malaysia, 08 - 09 December 2016. | International |
| 2016 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Manuscript # JAUTO-16-0167, "Research on phase synchronization strategies of diesel engine to start up quickly", June 2016. | International |
| 2016 | Reviewer, SAE International, The 12th International Conference on Automotive Engineering (ICAE2), Manuscript No. 16ICAE-0008, "Passenger car's Road-Vehicle Efficiency Study under Bangkok Driving Conditions", 2016 | International |
| 2016 | Reviewer, 7th International Conference on Mechanical and Manufacturing Engineering (ICME2016). | International |
| 2016 | Reviewer, SAE International, The 12th International Conference on Automotive Engineering (ICAE2), Manuscript No. 16ICAE-0028, "Effects of turbocharging in an S.I. engine", 2016 | International |
| 2015 | Timbalan Pengarah 1, Program Qaseh Ramadhan 2015, Kelab Rekreasi dan Kebajikan Staf FKMP (MECHCLUB), Fakulti Kejuruteraan Mekanikal & Pembuatan, Universiti Tun Hussein Onn Malaysia, 05 - 13 Julai 2015. | University |
| 2015 | Track Director (Automotive Engineering), 6th International Conference on Mechanical and Manufacturing Engineering (ICME2015). | International |
| 2015 | Reviewer, International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015) | International |
| 2015 | Reviewer, 6th International Conference on Mechanical and Manufacturing Engineering (ICME2015). | International |
| 2015 | Keynote Speaker and Session Chair for 7th International Conference on Researches in Engineering, Technology and Sciences (ICRETS), Global Research & Development Services (GRDS), Kuala Lumpur, Malaysia, 16 - 17 July 2015. | International |
| 2015 | Session Chair for 7th International Conference on Researches in Engineering, Technology and Sciences (ICRETS), Global Research & Development Services (GRDS), Kuala Lumpur, Malaysia, 16 - 17 July 2015. | International |
| 2015 | Session Chair for 6th International Conference on Mechanical and Manufacturing Engineering (ICME2015), UTHM Johor, Malaysia, 19 - 20 October 2015. | International |
| 2015 | Secretariat, International Conference on Computational Fluid Dynamics in Research and Industry 2015 (CFDRI 2015) | International |
| 2015 | Reviewer, SAE International, Manuscript No. 16PFL-0443, "Optimal Fuzzy Logic Based Energy Management Strategy of Battery/Supercapacitor Hybrid Energy Storage System for Electric Vehicles", 2015. | International |
| 2015 | Reviewer, SAE International, Manuscript No. 15CV-0095, "Quantitative Effects of Vehicle Parameters on Fuel Consumption for Heavy-Duty Vehicle", 2015. | International |
| 2015 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Manuscript # JAUTO-14-0342.R1, "Combustion investigation of a swirl-chamber spark-ignited wet ethanol engine", February 2015. | International |
| 2014 | Reviewer, 5th International Conference on Mechanical and Manufacturing Engineering (ICME2014). | International |
| 2014 | Reviewer, SAE International, "Fuel Filtration Considerations in the Changing Landscape of Engines and Fuels in Railroad Applications", 2014 | International |
| 2014 | Reviewer, National Conference On Research And Innovation 2014 (NCoRI2014) | National |
| 2014 | Reviewer, Environment, Development and Sustainability (Springer), "CARBON FOOTPRINT FOR TRANSPORTATION ACTIVITIES OF INSTITUTIONAL CAMPUS", 2014. | International |
| 2014 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Combustion investigation of a swirl-chamber spark-ignited wet ethanol engine: simulation and experimental results", November 2014. | International |
| 2014 | Reviewer, SAE International, "Performance and Emissions analysis of Hydrogen Fuelled Direct Injection Truck Engine employing water Injection", 2014 | International |
| 2014 | Reviewer, SAE 2015 World Congress & Exhibition (Fuel and Additive Effects on Engine Systems), SAE International, "Compatibility Properties of Fueling Infrastructure and Vehicle Fuel System Plastics to a Test Fuel Representing E10", 2014 | International |
| 2013 | Reviewer, SAE International, "Creation of High Fidelity Benchmark vehicle Model for FE and acceleration performance simulations and using the same for New Concept vehicle simulations", 2013 | International |
| 2013 | Reviewer, International Journal of Engineering and Technology Innovation, "Modification Design of Petrol Engine for Alternative Fuelling using Compressed Natural Gas (CNG)", 2013. | International |
| 2013 | Reviewer, SAE International, "Automated Optimizing Calibration of Engine Driveability on the Dynamic Powertrain Test Bed", 2013 | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "A Virtual Motorcycle Driver to Simulate Real Manoeuvres from Experimental Data", - Revised Article, January 2012. | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Comparison of combustion and exhaust emissions of CI engine fueled with diesel from direct coal liquefaction and diesel blends", -Revised Article, October 2012. | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Comparison of combustion and exhaust emissions of CI engine fueled with diesel from direct coal liquefaction and diesel blends", August 2012. | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Evaluation of Efficiency and Drive Cycle Emissions for a Hydrogen Direct Injection Engine", - Special Issue Article, February 2012. | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Experimental study on the influences of ? and intake temperature on combustion characteristics in an HCCI engine fueled with n-heptane", June 2012. | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Model based Control of a Diesel VGT and EGR system using an LPV Methodology", April 2012. | International |
| 2012 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "THE EFFECT OF HALF-SHAFT TORSION DYNAMICS ON THE PERFORMANCE OF A TRACTION CONTROL SYSTEM FOR ELECTRIC VEHICLES", - Revised Article, January 2012. | International |
| 2012 | Reviewer, SAE International, "Exhaust Emissions from Heavy-Duty Vehicles Under Actual Traffic Conditions in the City of Poznan", 2012. | International |
| 2012 | Reviewer, SAE International, "Turbulent Intensity and Combustion Process in Gasoline Direct Injection Engines", 2012. | International |
| 2012 | Reviewer, 2012 IEEE International Conference on Power and Energy (PECon), 2012 | International |
| 2012 | Reviewer, International Conference on Mechanical And Manufacturing Engineering 2012 (ICME2012). | International |
| 2012 | Reviewer, 2012 IEEE Symposium on Business, Engineering and Industrial Applications, 2012 | International |
| 2012 | Reviewer, International Islamic University Malaysia Engineering Journal, "ON THE TIME LAG OF A FIRST-ORDER PROCESS'S SINUSOIDAL RESPONSE", - Short Communication, February 2012. | International |
| 2011 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "Combustion Characteristics of LPG and Biodiesel Mixed Fuel in Various Blending Ratios under Compressed Ignition in a Constant Volume Chamber", July 2011. | International |
| 2011 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "THE EFFECT OF HALF-SHAFT TORSION DYNAMICS ON THE PERFORMANCE OF A TRACTION CONTROL SYSTEM FOR ELECTRIC VEHICLES", November 2011. | International |
| 2011 | Reviewer, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, "A Virtual Motorcycle Driver to Simulate Real Manoeuvres from Experimental Data", September 2011. | International |
Courses & Training
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2022 | BENGKEL DASAR PERUMAHAN PELAJAR UNIVERSITI TUN HUSSEIN ONN MALAYSIA UTHM / THE STRAIGHT HOTEL & SUITES, MELAKA | 26/05/2022 - 28/05/2022 |
| 2022 | PRA BENGKEL PEMURNIAN DASAR PERUMAHAN PELAJAR UNIVERSITI TUN HUSSEIN ONN MALAYSIA (UTHM) UTHM / DEWAN AKTIVITI KOLEJ KEDIAMAN TUN FATIMAH | 29/03/2022 |
| 2022 | PROGRAM SESI PERKONGSIAN ILMU:PERMOHONAN GERAN TRANS-DISCIPLINARY RESEARCH GRANT SCHEME (TRGS) DI FKEE FKEE,UTHM / ATAS TALIAN | 07/03/2022 |
| 2022 | JERAYAWARA UNIT TERBITAN KHAS PENERBIT UTHM: SEMBANG 1 JAM TERBITAN KHAS UTHM / GOOGLE MEET | 31/01/2022 |
| 2021 | KURSUS PENGURUSAN, PERANCANGAN DAN PEMIKIRAN STRATEGIK PEJABAT PENDAFTAR,UTHM / APLIKASI ZOOM | 06/10/2021 - 07/10/2021 |
| 2021 | BENGKEL TOT PROGRAM ACCEPT AND ADAPT (FAST DAN FTK) UTHM / PLATFORM GOOGLE MEET | 29/09/2021 |
| 2021 | JERAYAWARA PUSAT APEL - SESI PENERANGAN APEL.A BERSAMA PENGURUSAN AKADEMIK DAN STAF FAKULTI UTHM / DALAM TALIAN - GOOGLE MEET | 23/09/2021 |
| 2021 | SEMINAR KESELAMATAN DAN KESIHATAN PEKERJAAN UTHM / Zoom Online UTHM | 23/09/2021 |
| 2021 | TUTORIAL PANDUAN PENGISIAN MAKLUMAT KENAIKAN PANGKAT STAF AKADEMIK (LALUAN BAGI GRED 52 KE BAWAH) PEJABAT PENDAFTAR,UTHM / APLIKASI ZOOM | 08/09/2021 |
| 2021 | KURSUS PENGURUSAN KEWANGAN EKSEKUTIF DAN KELESTARIAN KEWANGAN PEJABAT PENDAFTAR,UTHM / GOOGLE MEET | 08/08/2021 - 09/08/2021 |
| 2021 | PROGRAM WITH ADJUNCT PROFESSOR JTKM FTK OPTIMIZING TECHNOPRENEUSHIP FOR SUSTAINABLE GROWTH UTHM / Zoom online | 04/07/2021 |
| 2021 | KOLOKIUM PENYELIDIKAN SEM 2 SESI 2020/2021 UTHM / google meet platform | 13/06/2021 - 15/06/2021 |
| 2021 | NATURAL FIBER FOR SUSTAINABLE DEVELOPMENT IN FASHION, STATIONARY AND LIFESTYLE PRODUCTS UTHM / ZOOM | 10/06/2021 |
| 2021 | 'DUE DILIGENCE' KEPENTINGANNYA DALAM MENJAUHI RASUAH UTHM / ZOOM | 27/05/2021 |
| 2021 | PTTA RESEARCH WEEK WEBINAR : KEPENTINGAN RESEARCH ID KEPADA STAF AKADEMIK DAN UTHM oleh Prof. Dr. Mohd Amri bin Lajis UTHM / ATAS TALIAN | 23/05/2021 |
| 2021 | PTTA RESEARCH WEEK WEBINAR 23 MEI SIRI 1 UTHM / Online/Meet | 23/05/2021 |
| 2021 | TATACARA PENGISIAN BORANG DAFTAR BAHAN KIMIA UTHM UTHM / Google Meet | 17/03/2021 |
| 2021 | TAKLIMAT PEROLEHAN & PENGURUSAN BAHAN KIMIA UTHM / Google Meet | 11/03/2021 |
| 2021 | JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI TEKNOLOGI KEJURUTERAAN UTHM / ZOOM | 12/01/2021 |
| 2021 | PROGRAM KOLOKIUM PENYELIDIKAN SEM 1 SESI 2020/2021 UTHM / - | 10/01/2021 - 11/01/2021 |
| 2020 | DIALOG SAINS & AGAMA PANDEMIK COVID 19 "ISU DAN HAKIKAT" UTHM / - | 02/12/2020 |
| 2020 | EUSAHAWAN DIGITAL COMMERS BY TB168 UTHM / UTHM | 29/06/2020 |
| 2020 | ENERGY TRAINING MANAGEMENT UTHM / - | 25/06/2020 - 26/06/2020 |
| 2020 | SEMINAR MANISNYA BINGKISAN COVID-19 UTHM / UTHM | 26/04/2020 |