Staff Profile
| Full Name | Ts. Dr. MUHAMMAD FARID BIN SHAARI |
|---|---|
| Faculty | FAKULTI TEKNOLOGI KEJURUTERAAN |
| Department | JABATAN TEKNOLOGI KEJURUTERAAN MEKANIKAL |
| Designation | DS52 - PENSYARAH KANAN |
|
PENYELIDIK UTAMA INTEGRATED ENGINEERING SIMULATION AND DESIGN (IESD) FAKULTI TEKNOLOGI KEJURUTERAAN |
Field of Expertise
| Field Category (KPT) | ENGINEERING AND TECHNOLOGY |
|---|---|
| Field (KPT) | Mechanical Engineering |
| Field of Specialization (KPT) | Machine Design |
Areas of Research Interest
| 1. | Biologically inspired robot |
| 2. | Smart structure and system |
| 3. | Active material |
Innovation Field of Interest
| 1. | Smart machines, sensors and actuator technologies |
| 2. | Robotics |
| 3. | Manufacturing technology for sustainability |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2017 | KEJURUTERAAN ROBOTIK | UNIVERSITI SAINS MALAYSIA |
| 2007 | SARJANA KEJURUTERAAN MEKANIKAL | KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN |
| 2001 | SARJANA MUDA KEJURUTERAAN PEMBUATAN | UNIVERSITI KEBANGSAAN MALAYSIA |
Professional Appointments
| DS52 - Pensyarah Kanan |
Management Experience
| Date | Description |
|---|---|
| 01/01/2021 - 31/12/2022 | Penyelidik Utama
Fakulti Teknologi Kejuruteraan, Integrated Engineering Simulation and Design (IESD) |
| 05/05/2019 - 04/05/2022 | Penyelidik Bersekutu
Fakulti Teknologi Kejuruteraan, Innovative Manufacturing Technology (IMT) |
| 01/07/2019 - 30/06/2021 | Ketua Jabatan
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
| 01/09/2010 - 31/12/2010 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
| 01/09/2008 - 31/08/2010 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 23/08/2003 - 31/12/9999 | Board of Engineers Malaysia (BEM)
Boards of Engineers, Malaysia (BEM) | Ahli | Kebangsaan |
| 06/12/2018 - 31/12/9999 | Malaysia Board of Technologists (MBOT)
| Teknologis Berijazah | Kebangsaan |
| 27/01/2019 - 26/01/2020 | Malaysia Board of Technologists (MBOT)
| Teknologis Profesional | Kebangsaan |
| 01/01/2004 - 31/12/2004 | The Institution of Engineers, Malaysia (IEM)
Institution of Engineers Malaysia (IEM) | Ahli | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2019 | Automasi Perindustrian dan Robotik (BNM 40304), Sesi 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 | University |
| 2018 | Teknologi Kimpalan (BNM 30703), Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Kreativiti dan Inovasi (BNJ 10302), Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2018 | Automasi Perindustrian dan Robotik (BNM 40304) Sesi 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 | University |
| 2017 | Rekabentuk Kejuruteraan Mekanikal (BNJ 30203), Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Kejuruteraan Kawalan dan Instrumentasi (BNJ 30703), Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2017 | Teknologi Pemesinan Moden (BNM 30103), Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 | University |
| 2016 | Statik (BDA 10203), Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Keusahawanan (BPK 20802), Sesi 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Keusahawanan (BPK 20802), Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Teknologi elektrik dan Elektronik (BDA 14303), Sesi 20162017, Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2016 | Workshop Kejuruteraan Mekanikal II (BDA 18301), Sesi 20162017 Semester II, Universiti Tun Hussein Onn Malaysia, 2016 | University |
| 2015 | Keusahawanan (BDA 20802), Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Woksyop Kejuruteraan Mekanikal II (BDA 10301), Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Statik (BDA 10203), Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2015 | Lukisan Teknikal dan CAD (BDA 10703), Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 | University |
| 2010 | Teknologi Pengawalan Pembuatan (BDD4083), Sesi 20102011 Semester 1, UTHM, 2010 | University |
| 2009 | Teknologi Pengawalan Pembuatan (BDD4083), Sesi 20092010 Semester 1 dan 2, UTHM, 2009 | University |
| 2008 | Teknologi Pembuatan (DDA2092), Sesi 20082009 Semester 1, UTHM, 2008 | University |
| 2008 | Teknologi Pengawalan Pembuatan (BDD4083), Sesi 20082009 Semester 1, UTHM, 2008 | University |
| 2005 | CAD dan Pemodelan (BDA2052), Sesi 20042005 Semester 1, UTHM, 2005 | University |
| 2004 | Teknologi Pengeluaran (DKM3032), Sesi 20042005 Semester 1, UTHM, 2004 | University |
| 2004 | Rekabentuk Kejuruteraan dan CAE (BTM4313), Sesi 20042005 Semester 1, UTHM, 2004 | University |
| 2003 | Kursus AutoCAD, Sijil Teknologi Industri, Program KUiTTHO-Kimberly Clark, 2003 | Private |
| 2003 | Instrumentasi dan Kawalan (DTM2143), Sesi 20032004 Semester 1 dan 2, UTHM, 2003 | University |
| 2003 | Projek Rekabentuk Pembuatan dan CAE (DTM3153), Sesi 20032004 Semester 2, KUiTTHO, 2003 | University |
| 2003 | Kuasa Pneumatik dan Hidraulik (DTM3273), Sesi20032004 Semester 2, KUiTTHO, 2003 | University |
| 2003 | Amalan Kejuruteraan Mekanikal 4 - PLC dan Robotik (BTM1811), Sesi 20032004 Semester 2, KUiTTHO, 2003 | University |
| 2003 | CADD (BTM2043), Sesi 20022003 Semester 2, KUiTTHO, 2003 | University |
| 2003 | Praktis Teknikal 1 (DTJ2013), Sesi 20032004 Semester 1, KUiTTHO, 2003 | University |
| 2003 | Kursus Hidraulik, Sijil Teknologi Industri, Program KUiTTHO-Kimberly Clark, 2003 | Private |
| 2002 | Praktis Teknikal - Foundri (DTM1213), Sesi 20022003 Semester 1, KUiTTHO, 2002 | University |
| 2002 | Computer Aided Design and Drafting (BKF 1113), Sesi 20022003 Semester 1, KUiTTHO, 2002 | University |
| 2002 | Praktis Teknikal - Automasi (DTM1213), Sesi 20022003 Semester 1, KUiTTHO, 2002 | University |
| 2002 | Lukisan Kejuruteraan Berbantu Komputer (BTM1032), Sesi 20022003 Semester 3, KUiTTHO, 2002 | University |
Research Grants And Contracts
Publications
| Book |
|---|
| Noraini Marsi, Nur Athirah Huzaisham, Nor Mazlana Main, Muhammad Farid Shaari and Azrin Hani ABdul Rashid (2019) Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 1, ISBN:9789672306740 |
| Muhammad Farid Bin Shaari (2011) 50 Alumni Uthm Kejayaan Didikan Plsp-Ittho , UTHM , 35, ISBN:9789675457326 |
| Book Chapters |
| Noraini Marsi, Nur Athirah Huzaisham, Zuraidah Ithnain, Nor Mazlana Main, Mohd Nazrul Roslan, Muhammad Farid Shaari and Khairu Kamarudin (2020) Plastic Waste And Its Method Of Recycling, Green Composite Manufacturing Technology, UTHM , 23, ISBN:9789672389859 |
| Muhammad Farid Shaari, Azrin Hani Abdul Rashid, Harris Mubashir Mohamad Isa, Nik Normunira Mat Hassan, Mohd Nazrul Roslan, Siti Hana Nasir, Nurul Zakiah Zamri Tan, Siti Nor Hawanis Husain (2019) Fabrication Process Of Cotton Waste For Bio-Green Planting Bag, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 19, ISBN:9789672306740 |
| Muhammad Farid Shaari, Azrin Hani Abdul Rashid, Norshuhaila Mohamed Sunar, Mohd Nazrul Roslan, Muhammad Zulkipli, Tengku Nur Azila Raja Mamat (2019) Investigation On Coconut Coir Reinforcement For Cotton Planting Bag Mechanical Properties, Advanced Technology Centre: Research And Innovation Series 3, UTHM , 51, ISBN:9789672306603 |
| Azrin Hani Abdul Rashid, Muhammad Farid Shaari, Mohd Yazid Yahya, Mohd Rozi Ahmad, Mohd Nazrul Roslan, Khalid Hasnan, Siti Hana Nasir, Nurul Zakiah Zamri Tan (2019) Investigation On The Effects Of Textile Structure Of Recycled Pet Bottle (R-Pet) As Newly Developed Composites For Impact Energy Absorption, Advanced Technology Centre: Research And Innovation Series 2, UTHM , 19, ISBN:9789672306504 |
| Muhammad Farid Shaari, Azrin Hani Abdul Rashid, Harris Mubashir Mohamad Isa, Nik Normunira Mat Hassan, Mohd Nazrul Roslan, Siti Hana Nasir, Nurul Zakiah Zamri Tan, Siti Nor Hawanis Husain (2019) Physical Characterization Of Cotton Waste For Bio-Green Planting Bag, Bio-Green Bags: A Sustainable Alternative To Plastic, UTHM , 43, ISBN:9789672306740 |
| Muhammad Zulkipli, Yi Qin, Yi Yang, Muhammad Farid Shaari, Ahmad Syahrir Ayub and Firdaus Muhammad-Sukki (2019) The Open Air Electrical-Field Activated Sintering And Forming Of Micro-Components, Advanced Technology Centre: Research And Innovation Series 2, UTHM , 133, ISBN:9789672306504 |
| Muhammad Syakir Abd Lazak, Salwa Mahmood, Muhammad Farid Shaari, Aznizam Ahmad (2019) Workplace Ergonomic Risk Assessment (Wera) Analysis On Road Construction At Pagoh Higher Education Hub , Manufacturing Management And Improvement Case Studies Series 1, UTHM , 43, ISBN:9789672306542 |
| Journal |
| Rupashinii Thana Singam, Noraini Marsi, Hasri Mamat, Anika Zafiah Mohd Rus, Siti Hana Nasir and Muhammad Farid Shaari (2020) Physical Properties Of Natural Dyes Based On Lawsonia Inermis, Azadiractha Indica And Curcuma Longa Coated With Superhydrphobic Coating For Textile Applications, INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET), IAEME PUBLICATION , 4, 301, ISSN:09766340 |
| Noraini Marsi, Chow Li Kien, Juhari A Rani, Nor Mazlana Main, Mohd Ridzuan Mohd Jamir and Muhammad Farid Shaari (2020) Preparation And Performance Test Of Pefb Reinforced Box Waste Coated Superhydrophobic Coating For Shoe Sole Application, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 6, 210, ISSN:2229838X |
| Muhammad Farid Shaari, Tan Tian Gan, Azrin Hani Abdul Rashid, Nurul Zakiah Zamri Tan, Siti Hana Nasir, Mohd Nazrul Roslan, Chan Chee Ming, Tengku Nur Azila Raja Mamat (2019) Analysis On Load Resistance Characteristic For Kenaf And Woven Coir Fabrics , JOURNAL OF INDUSTRY, ENGINEERING AND INNOVATION , FAZ PUBLISHING , 11, 1, ISSN:26727382 |
| Siti Nor Hawanis Husain, Nur Aiman Abdul Razak, Azrin Hani Abdul Rashid, Musli Nizam Yahya, Nurul Zakiah Zamri Tan, Muhamad Farid Shaari, Salwa Mahmood, Noraini Marsi & Harris Mubashir Nohamad Isa (2019) Development Of Kenaf Nonwoven As Automotive Noise Absorption, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication Ltd , 6, 101, ISSN:16627482 |
| Salwa Mahmood, Muhammad Nazreen Hardan, Muhammad Khairul Samat, Nur Syamimi Jiran, Muhammad Farid Shaari (2019) Ergonomic Posture Assessment Of Butchers: A Small Enterprise Study In Malaysia Food Industry, JURNAL TEKNOLOGI, Penerbit UTM , 10, 89, ISSN:21803722 |
| S Z Khamis, M H Othman, S Hasan, N M Main, S R Masrol, M F Shaari, S N Ibrahim and S Salim (2019) Multiple Responses Optimisation In Injection Moulding Parameter For Polypropylene-Nanoclay-Gigantochloa Scortechinii Via Taguchi Method., JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing , 3, 1, ISSN:17426596 |
| Azrin Hani Abdul Rashid, Siti Nor Hafiza Mohamad, Khairani Nasir, Muhammad Farid Shaari, Mohd Nazrul Roslan, Noraini Marsi, Siti Hana Nasir, Mohd Faizal Esa, Salwa Mahmood (2019) Puncture Impact Performance Of Coir-Aramid/Epoxy Hybrid Composite: Effects Of Stacking Configurations, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, International Journal of Mechanical Engineering and Robotics Research , 5, 368, ISSN:22780149 |
| Khairani Nasir, Azrin Hani Abdul Rashid, Nurul Atikah Abd. Razak, Muhammad Farid Shaari, Mohd Nazrul Roslan, Shazarel Shamsudin, Mohd Shukri Ansar, Siti Nor Hawanis Husain, Syafiqah Dzulkefli, Noraini Marsi (2019) The Tensile Performance Of R-Pet Bottle String: Effects Of Different String Sizes And Cutting Axes, UNIVERSAL JOURNAL OF MECHANICAL ENGINEERING , HORIZON RESEARCH PUBLISHING , 12, 1, ISSN:23323361 |
| Muhammad Farid Shaari, Zahurin Samad, Lim Chong Hooi, Mohd Sharizal Abdul Aziz, Azrin Hani Abdul Rashid, Salwa Mahmood (2018) Numerical Simulation Analysis On Water Jet Pressure Distribution At Various Nozzle Aperture, ADVANCED SCIENCE LETTERS, American Scientific Lettters , 11, 8808, ISSN:19366612 |
| M.H.Othman, M.H.I.Ibrahim, A.M.Amin,M.Y,Hashim, C.H.Ng, S.A.Osman, O.M.F.Marwah, M.F.Shaari, N.H.Rafai, M.A.Johar (2018) The Optimisation Of Processing Conditions And The Effect Of Nanoclay Towards Snap Fit Samples, INTERNATIONAL JOURNAL OF PURE AND APPLIED MATHEMATICS, Academic Publications, Ltd , 3, 1, ISSN:13143395 |
| Archansdran S., Shaari M.F., Rosly M.A. (2016) Characterization Of Double Layer Ipmc Bending Actuation, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, UTHM , 6540, ISSN:18196608 |
| O.M.F. Marwah, S. Sharif, M.S. Shukri, E.J. Mohamad, M.F. Shaari, M.Y. Hashim (2016) Process Parameters Evaluation For Direct Investment Casting, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, The Int. Journals of Engineering adn Sciences (IJENS) , 1, 89, ISSN:2227-2771 |
| N. Nordin, Z.A.A. Karim, S. Othman, V.R. Raghavan, S.M. Seri, M.F. Shaari, S. Adzila (2016) Validation By Piv Of The Numerical Study Of Flow In The Two-Dimensional Turning Diffuser, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 11953, ISSN:18196608 |
| M. F. Shaari (2015) Drag Analysis Of Contractile Water Jet Locomoted Micro Auv In Laminar Fluid, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 7, 1188, ISSN:16627482 |
| Muhammad F.S., Samad Z., Husaini A.B., Arshad M.R., Mahzan S. (2013) Preliminary Analysis On Generated Jet Pressure From Ionic Polymer Composite Actuated Radial Contraction Using Balloon Manometry Technique, INDIAN JOURNAL OF MARINE SCIENCES, National Institute of Science Communication And Information Resources , 12, 1023, ISSN:03795136 |
| Salleh Ahmad Bareduan, Sulaiman Hj Hasan, Noor Hakim Rafai and Muhammad Farid Shaari (2006) Cyber Manufacturing System For Small And Medium Enterprises: A Conceptual Framework, TRANSACTIONS OF NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION FOR SOCIETY OF MANUFACTURING ENGINEERS , Society of Manufacturing Engineers , USA , 5, 365, ISSN:1047-3025 |
| Media Digital |
| Muhammad A'imullah bin Abdullah, Mirza Basyir bin Rodhuan, Rosniza binti Hussin@Isa, Muhammad Farid bin Shaari, Syabillah bin Sulaiman (2021) Uthm (Ftk) Bachelor Of Mechanical Engineering Technology (Automotive) , Youtube , ISBN:- |
| Muhammad A'imullah bin Abdullah, Mirza Basyir bin Rodhuan, Rosniza binti Hussin@Isa, Muhammad Farid bin Shaari, Rahim bin Jamian, (2021) Uthm (Ftk) Bachelor Of Mechanical Engineering Technology (Manufacturing), Youtube , ISBN:- |
| Muhammad A'imullah bin Abdullah, Mirza Basyir bin Rodhuan, Rosniza binti Hussin@Isa, Muhammad Farid bin Shaari, Zuliazura binti Mohd Salleh (2021) Uthm (Ftk) Bachelor Of Mechanical Engineering Technology (Plant) , Youtube , ISBN:- |
| Prosiding / Seminar |
| Richmond Chris Ho Chee Leong, Muhammad Zulkipli and Muhammad Farid Shaari (2021) Design Of A Low Cost Coin Acceptor For Vending Machine, UTHM , 743, ISBN:27735303 |
| Noraini Marsi, Lingeshavaran Subramaniam , Anika Zafiah Mohd Rus , Nurulsaidatulsyida Sulong , Muhammad Haikal Mohd Fodzi , Nur Athirah Huzaisham , Nik Alnur Auli Nik Yusuf , Salwa Mahmood , Muhammad Farid Shaari and Hafizuddin Hakim Shariff (2020) The Mechanical Performance Of Pipe Based On Fiberglass Reinforced With Plastic Waste (Frpw) Composites , IOPSCIENCE , 1, ISBN:17578981 |
| Siti Nor Hawanis Husain, Azrin Hani Abdul Rashid*, Muhammad Farid Shaari, Mohd Nazrul Roslan, Nik Normunira Mat Hassan, Mohd Rozi Ahmad, Razlin Abd Rashid (2019) Mechanical Properties Evaluation Of Nonwoven Industrial Cotton Waste Produced By Needle Punching Method, IOP PUBLISHING , 1, ISBN:1757899X |
| Muhammad Aliff Rosly, Hanafiah Yussof, Muhammad Farid Shaari, Zahurin Samad, Dayana Kamaruzaman, Abdul Rahman Omar (2018) Speed Control Mechanism For Ipmc Based Biomimetic Flapping Thruster, IEEE , 218 |
| Muhammad Farid Shaari, Ibrahim Ismail, Mohd Zamir Zakwan Mohammad Rasli, Wan Akashah Wan Jamaludin, Harris Mubashir Mohammad Isa, Azrin Hani Abdul Rashid (2017) Design And Development Of Automatic Sharia Compliant Wheelchair Wheels Cleaner, AIP Publishing , 020003-1, ISBN:9780835414990 |
| MH OTHMAN, MAM YUSOF, S HASAN, MHI IBRAHIM, SYM AMIN, OMF MARWAH, MF SHAARI, MA JOHAR, SNA SHAHBUDIN (2017) Development Of Mould Of Rheology Test Sample Via Cadmould 3d-F Simulation. , IOP PUBLISHING , 1, ISBN:1757-8981 |
| O.M.F. MARWAH, A. DARSANI, M.A. JOHAR, A.A. ROSDEN, E.J. MOHAMAD, M.F. SHAARI, R.H.A. HAQ, A.M. AMIN (2017) Evaluation Of Injection Molding Process Parameters For Manufacturing Polyethylene Terephthalate, EDP SCIENCES , 1, ISBN:2261236X |
| Shaari M.F., Samad Z., Othman M.H., Marwah O.M.F. (2016) Feasibility Study On Ipmc Actuated Contractile Water Jet Thruster Body Contraction, MATEC Web of Conferences , 1 , ISBN:2261236X |
| M.F. Shaari (2015) Drag Analysis Of Contractile Water Jet Locomoted Micro Auv In Laminar Fluid, Trans Tech Publication , ISBN:9783037855911 |
| M F SHAARI, H ABU BAKAR, N NORDIN, S K SAW, Z SAMAD (2013) Analysis On Oscillating Actuator Frequency Influence Of The Fluid Flow Characterization For 2d Contractile Water Jet Thruster, IOP PUBLISHING LTD , 012010, ISBN:1757899X |
| Muhammad Farid Bin Shaari (2012) Cold Forging Process For Auv Propeller Fabrication, URRG USM ISBN9789834317867 |
| Muhammad Farid Bin Shaari (2012) Preliminary Analysis On Generated Jet Pressure From Ionic Polymer Metal Composite Actuated Radial Contraction Using Balloon Manometry Technique, URRG USM, ISBN9789834317867 |
| Muhammad Farid Bin Shaari (2011) Aerial Fish Feeding System |
| Muhammad Farid Bin Shaari (2010) Lean Manufacturing System Assessment In Sme: A Case Study |
| Muhammad Farid Bin Shaari (2010) Tear Strength Optimization Of Stamping Parameters In Recycle Paper Making Process Using Taguchi Methods |
| Muhammad Farid Bin Shaari (2009) M.F.Shaari, (2009) Studies On Cut-Off Aeration Control For Intensive Prawn Culture |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2010 | Consultant for Sek Tinggi Batu Pahat, First Lego League Competition (Lego Robot) | University |
| 2010 | Consultant for Batu Pahat Dental Clinic, Develop Cold Dental Tools Sterilizer | University |
| 2009 | Academic consultant, Develop Module and TOT for IKBN Temerloh. Automation System and Food Packaging and Distribution Industry Course | University |
| 2005 | Consultation: Programme Coordinator for Executive Diploma Programme (UTHM-Kimberly Clarks), 2005-2006 | University |
| 2004 | Consultation: FKMP's Coordinator for Laboratory Development Committee, FKMP Complex of Technology Project and existing laboratories renovation project, 2004-2005 | University |
| 2003 | Consultative Advisor for laboratory development, Faculty of Engineering Technology (FTK), 2003-2004 | University |
| 2003 | Consultant for BIP, UTM for "Projek Perolehan Peralatan ke Lapan Buah IKBN Baru Dalam Bidang Automotif", 2003 | Government |
Supervision
| Year | Description | Role |
|---|---|---|
| 2011 | Engineering Competition: Supervise Malaysian University Robot Challenge (MURoC 2011) FKMP-UTHM Team, Paintball Robot (1st place Winner of 2011) | Supervisor |
| 2010 | Engineering Competition: Manage and supervise Malaysian University Robot Competition (MURoC 2010) FKMP-UTHM Team, Climbing Robot Category | Supervisor |
| 2002 | Industrial Supervision: Supervise project "Design, Supply, Installation, Testing and Commissioning Building Automation System to Common Utility Trench (CUT) in Precint 2,3 and 4, Putrajaya" as a Project Engineer, 2002 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2011 | Academic Recognition: Represent UTHM in ITEX 2011, Aerial Fish Feeding System, Bronze Medal | National |
| 2010 | Community Service: AJK, Program Lego Robot bersama Sekolah Tinggi Batu Pahat dan Sek. Keb. Pintas Puding | University |
| 2010 | Academic Recognition: Represent FKMP for Research and Innovation Fest 2010, organized by PPI, UTHM, "Aerial Fish Feeding System" - Gold Medal | University |
| 2010 | Academic Recognition: Team Manager to represent UTHM at National Invention Carnival 2010, MOSTI-UTM, 1st place Winner | National |
| 2009 | Human Development: Fasilitator Program Motivasi Gearing For Success 2009 di Pusat Latihan & Rekreasi, Felcra Tebing Tinggi, Segamat Johor. Anjuran Jawatankuasa Kecil Program Pembangunan Pelajar FKMP, 02-04 Oktober 2009. | University |
| 2009 | Community Service: Program Educational Robot bersama Sek. Keb. Pintas Puding, Parit Raja | University |
| 2004 | AJK OBE FKMP, 2004-2005 | University |
| 2004 | Management: Coordinator, INSEP 2004, Manufacturing System Course | University |
| 2004 | AJK Kecil Sambutan (Pegawai pengiring) untuk Majlis Konvokesyen ke-3, KUiTTHO, 2003 | University |
| 2003 | AJK Kecil Keselamatan, Pengangkutan dan Peralatan, Program Hari Penyayang Anak-anak Staf KUiTTHO, Fakulti Teknologi Kejuruteraan di Tanjung Bidara, Melaka, pada 1 Februari 2003 | University |
| 2003 | AJK Kelab Catur KSKUiTTHO, KUiTTHO, 2003-2005 | University |
Courses & Training
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2022 | TRAINING OF TRAINERS (TOT) FOR HUMIDITY AND TEMPERATURE CHAMBER UTHM / MAKMAL PENGUJIAN KESELESAAN TERMA (2.E.1.023) | 16/05/2022 |
| 2022 | SEMINAR PERATURAN KESELAMATAN DI DALAM KAMPUS & MAKMAL UNIVERSITI KEPADA STAF DAN PELAJAR FTK UTHM / ZOOM | 24/03/2022 |
| 2022 | PYTHON FOR SMART MANUFACTURING UiTM / UTHM | 13/03/2022 - 15/03/2022 |
| 2022 | ICON TALK : NEGOTIATION SKILLS WITH INDUSTRY UTHM / APLIKASI ZOOM | 24/02/2022 |
| 2022 | KOLOKIUM PENYELIDIKAN PASCA SISWAZAH SEMESTER 1 SESI 2021/2022 UTHM / ONLINE GOOGLE MEET | 02/01/2022 - 04/01/2022 |
| 2021 | TAKLIMAT PENYEDIAAN DOKUMEN-DOKUMEN PEPERIKSAAN AKHIR DAN PROSES VETTING BAGI SEMESTER 1 SESI 2021/2022, FAKULTI TEKNOLOGI KEJURUTERAAN (FTK) UTHM / ZOOM platform | 15/11/2021 |
| 2021 | BENGKEL PERSEDIAAN AWAL PSM FTK UTHM / meet.google.com/fus-vaaf-sen | 13/10/2021 |
| 2021 | SEMINAR KESELAMATAN DAN KESIHATAN PEKERJAAN UTHM / Zoom Online UTHM | 23/09/2021 |
| 2021 | MAJLIS BACAAN YASSIN AUDIT ETAC UTHM / platform online google meet | 09/09/2021 |
| 2021 | BENGKEL PEMBANGUNAN RUBRIK BAHARU, BUKU PANDUAN DAN PEMURNIAN SISTEM PROJEK SARJANA MUDA (PSM), FAKULTI TEKNOLOGI KEJURUTERAAN (FTK) UTHM / Google Meet: https://meet.google.com/mwb-otmo-kny | 06/09/2021 - 09/09/2021 |
| 2021 | TAKLIMAT PENYELIAAN PELAJAR LI SEM 2 2020/2021 FTK UTHM UTHM / SECARA ATAS TALIAN | 26/07/2021 |
| 2021 | PROGRAM WITH ADJUNCT PROFESSOR JTKM FTK OPTIMIZING TECHNOPRENEUSHIP FOR SUSTAINABLE GROWTH UTHM / Zoom online | 04/07/2021 |
| 2021 | TAKLIMAT LATIHAN INDUSTRI SIRI 2 SEM 1 2020/2021 FTK UTHM UTHM / SECARA ATAS TALIAN | 27/06/2021 |
| 2021 | SESI TAKLIMAT RESEARCH ENHANCED - STRUCTURED INTERNSHIP PROGRAMME (RE-SIP) FTK 2021 UTHM / SECARA ATAS TALIAN | 16/06/2021 |
| 2021 | KOLOKIUM PENYELIDIKAN SEM 2 SESI 2020/2021 UTHM / google meet platform | 13/06/2021 - 15/06/2021 |
| 2021 | NATURAL FIBER FOR SUSTAINABLE DEVELOPMENT IN FASHION, STATIONARY AND LIFESTYLE PRODUCTS UTHM / ZOOM | 10/06/2021 |
| 2021 | KURSUS PEMANTAPAN JURUAUDIT DALAMAN ISO 9001:2015 PUSAT PEMBANGUNAN AKADEMIK, UTHM / GOOLE MEET | 01/06/2021 |
| 2021 | KURSUS PENGURUSAN LAMAN WEB PTJ MENGGUNAKAN JOOMLA PEJABAT PENDAFTAR,UTHM / MAKMAL KOMPUTER BLOK L, ARAS BAWAH PTTA | 23/05/2021 |
| 2021 | SUBMIT COPYRIGHT IN 1 HOUR UTHM / GOOGLE MEET | 11/04/2021 |
| 2021 | KURSUS BENGKEL 2U2I DAN WORK BASED LEARNING (WBL) LAIN-LAIN / ATAS TALIAN | 16/02/2021 |
| 2021 | BENGKEL TASKFORCE DOKUMEN AUDIT ETAC 2021, BAGI PROGRAM SARJANA MUDA TEKNOLOGI KEJURUTERAAN MEKANIKAL (LOJI) DENGAN KEPUJIAN (BNL), FAKULTI TEKNOLOGI KEJURUTERAAN UTHM / Atas Talian - Google Meet: https:// meet.google.com/aps-ckpc-gkr | 15/02/2021 |
| 2021 | GROW AND SHARE TOGETHER (GST) SIRI 1/2021 BASIC SIGN LANGUAGE 1 UTHM / PAUTAN GOOGLE MEET | 04/02/2021 |
| 2021 | BENGKEL PERSEDIAAN PERMOHONAN PERUNTUKAN PEMBANGUNAN (DE) BAGI PROJEK FIZIKAL DAN PERALATAN RANCANGAN MALAYSIA KE-12 (RMKE-12) 2ND ROLLING PLAN, UTHM UTHM / Bilik Mesyuarat Perdana, Blok S, Pejabat Pembangunan dan Penyenggaraan | 27/01/2021 - 31/01/2021 |
| 2021 | PROGRAM KOLOKIUM PENYELIDIKAN SEM 1 SESI 2020/2021 UTHM / - | 10/01/2021 - 11/01/2021 |
| 2021 | BENGKEL PEROLEHAN JTKM 2021 UTHM / Atas talian = Google meet https://meet.google.com/ykj-hbcz-gwe | 03/01/2021 |
| 2020 | HOW TO DESIGN ASSESSMENT IN ACCORDANCE TO ETAC PRINCIPLES UTHM / GOOGLE MEET | 24/11/2020 |
| 2020 | KNOWLEDGE SHARING TALK ? EFFICIENT TEACHING AND LEARNING DURING COVID-19 UTHM / - | 12/11/2020 |
| 2020 | ONLINE ASSESMENT BEST PRACTICE : THE COURSE SESSION 4 AND 5 UTHM / GOOGLE MEET | 08/11/2020 |
| 2020 | ONLINE ASSESMENT BEST PRACTICE :THE COOURSE SESSION 1, 2 AND 3 UTHM / GOOGLE CLASSROOM | 05/11/2020 |
| 2020 | TAKLIMAT VPN FTK UTHM UTHM / MAKMAL TEKNOLOGI CADCAM UTHM PAGOH | 22/09/2020 |
| 2020 | MAJLIS KHATAM AL-QURAN & AMANAT DEKAN FTK UTHM / UTHM | 14/05/2020 |