Staff Profile
| Full Name | Dr. MOHD SALLEHUDDIN BIN YUSOF |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN PEMBUATAN |
| Designation | DS51 - PENSYARAH KANAN |
|
PENYELIDIK UTAMA ENGINEERING DESIGN RESEARCH GROUP (EDRG) FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Field of Expertise
| Field Category (KPT) | MANUFACTURING |
|---|---|
| Field (KPT) | Nanotechnology |
| Field of Specialization (KPT) | Nanotechnology |
Areas of Research Interest
| 1. | machinery design and development |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2010 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | SWANSEA UNIVERSITY |
| 1996 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | SASEBO NAT. COLLEGE OF TECH. NAGASAKI |
Professional Appointments
| DS51 - Pensyarah Kanan |
Management Experience
| Date | Description |
|---|---|
| 01/01/2021 - 31/12/2022 | Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Engineering Design Research Group (EDRG) |
| 01/01/2020 - 30/06/2021 | Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Additive Manufacturing Research Group |
| 01/11/2016 - 31/10/2017 | Felo Pelajar Tanpa Asrama
Kolej Kediaman Taman Universiti dan Pelajar Tanpa Asrama, Unit Pentadbiran |
| 01/11/2015 - 31/10/2016 | Felo Pelajar Tanpa Asrama
Pusat Perumahan dan Pengangkutan Pelajar, Kolej Kediaman Pelajar Tanpa Asrama |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 29/03/2021 - 29/03/2022 | Malaysia Board of Technologists (MBOT)
| Ahli | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2016 | Engineering Statistik (Degree BDA24103), Sem 2 2015/2016, UTHM | University |
| 2016 | Engineering Statistik (Degree BWM20502), Sem 2 2015/2016, UTHM | University |
| 2016 | Creativity and Innovation (Degree BDU20902), Sem 2 2015/2016, UTHM | University |
| 2016 | Engineering Statistics (Degree BDA24103), Sem 1 2015/2016, UTHM | University |
| 2016 | Entrepeneurship (Degree BDA 20802) Sem 1 2015/2016, UTHM | University |
| 2016 | Entrepeneurship (Degree BPK20802), Sem 2 2015/2016, UTHM | University |
| 2016 | Manufacturing Technology Practice I Welding Skill (Degree BDA18201), Sem 1 2015/2016, UTHM | University |
| 2016 | Manufacturing Technology Practice I Welding Skill (Degree BDA18001), Sem 1 2015/2016, UTHM | University |
| 2015 | Enterpreneurship (Degree BPK20802) Subject Coordinator Sem 1 20152016 | University |
| 2015 | Engineering Statistic (Degree BDA24103) Sem 1 20152016 | University |
| 2015 | WOKSYOP KEJURUTERAAN MEKANIKAL II / MECHANICAL ENGINEERING WORKSHOP II PNEUMATIC (Degree BDA 18301) Sem 2 / 20142015 | University |
| 2015 | Enterpreneurship (Degree BPK 20802) Sem 2 / 20142015 | University |
| 2015 | Mechanical Engineering Workshop 1 Welding (Degree BDA18201) Sem 1 20152016 | University |
| 2014 | Creativity and Innovation (Degree BDA106002), Sem 2 2013/2014, UTHM | University |
| 2014 | Professional Ethics and Management Degree-BDA4040)], Sem 2 20132014 , UTHM | University |
| 2013 | Engineering Economy (Degree BPK 30902) Sem 1 20132014 | University |
| 2013 | Enterpreneurship (Degree BPK 20902) Sem 1 20132014 | University |
| 2013 | Engineering and Society (Degree BDA 4052) Sem 1 2012/2013, UTHM | University |
| 2013 | Industrial Engineering (Degree BDA 4012) Sem 2 20122013, UTHM | University |
| 2013 | Engineering and Society (Degree BDA 40502) Sem 2 20122013, UTHM | University |
| 2013 | Industrial Engineering (Degree BDA 40102) Sem 2 20122013, UTHM | University |
| 2012 | Reseach Methodology (Masters- MDU10100), Sem 2 2011/2012, CEC UTHM | University |
| 2012 | Energy Study and Management (Masters - MMV19003), Sem 2 2011/2012, CEC UTHM | University |
| 2012 | Creativity and Innovation (Degree BDA10602). Sem 2 2011/2012, UTHM | University |
| 2012 | Design Engineering (Masters MMV16003), Sem 2 2011/2012, CEC UTHM | University |
| 2012 | Reseacrh Methodology (Masters- MDU10100), Sem 2 2011/2012, UTHM | University |
| 2012 | Engineering Lab - Welding Technologies (Degree BDA 17001), Sem 1 2012/2013, UTHM | University |
| 2012 | Engineering Workshop (Degree BDA 18201) Sem 1 2012/2013, UTHM | University |
| 2011 | Manufacturing Technology Practice III CNC Turning (Degree-DAM24303), Sem 2 2010/2011, UTHM | University |
| 2011 | Indutrial Engineering and System (Masters -MMV14003), Sem 1 2011/2012, CEC UTHM | University |
| 2011 | Mechanical Workshop Practice I Welding Technology (Degree-BDA18001), Sem 1 2011/2012, UTHM | University |
| 2011 | Creativity and Innovation (Degree BDA106002), Sem 2 2011/2012, UTHM | University |
| 2004 | Health and Safety (Diploma DKM2032), Sem 2 2004/2005, UTHM | University |
| 2004 | Industrial Automation (Diploma DKM3043), Sem 1 2004/2005, UTHM | University |
| 2003 | Engineering Design (Diploma DKM 3053), Sem 1 2003/2004, UTHM | University |
Research Grants And Contracts
Publications
| Book Chapters |
|---|
| Suhaimi bin Hassan, Mohd Sallehuddin bin Yusof, Idris bin Maksud (2020) A Study Of Carbon Nanotube (Cnt) Ink With Pdms Printing Plate On Fine Solid Lines Printed By Micro-Flexographic Printing Method, Additive Manufacturing: Research And Development Series 1, UTHM , 110, ISBN:9789672916376 |
| Suhaimi bin Hassan, Mohd Sallehuddin bin Yusof, Idris bin Maksud (2020) Application Of Rapid Prototyping 3d Printer For Fabricating Micro-Flexographic Pdms Printing Plate, Additive Manufacturing: Research And Development Series 2, UTHM , 50, ISBN:9789672916383 |
| Suhaimi Hassan, Mohd Sallehuddin Yusof, Zaidi Embong, Mohamad Zhairul Iqumal Jumari, Maznan Ismon, Hanis Zakaria, Mohammad Zulafif Rahim, Rosli Ahmad and Engku Mohd Nasri Engku Nasir (2019) A Preliminary Study Of Additional Safety Mechanical Structure For Safety Shoe, Advances In Material Sciences And Engineering, Springer Nature , 577, ISBN:9789811382970 |
| General Publications |
| Suhaimi bin Hassan Mohd Sallehuddin bin Yusof, Zaidi bin Embong, Idris bin Maksud, Mohamad Nor bin Nodin (2018) A Study Of Graphene Ink In Fine Solid Lines Printed By Micro-Flexographic Printing Process For Electronic Industry, phantomsfoundation , 63, ISBN:- |
| Journal |
| Hassan S.,Yusof N.M.,Ikhsan M.S.,Jumari M.Z.I.,Nadir M.A.M.,Ibrahim M.H.H.,Nor Azman M.A.M.,Mohd Sarif M.A.F.,Abdul Rashid M.A.R.,Yusof M.S.,Ismon M.,Zakaria H.,Azmi M.A.,Marwah O.M.F. (2021) Safety Working Environment At Highway: Safety Warning Detector (Swad) System, JOINT JOURNAL OF NOVEL CARBON RESOURCE SCIENCES & GREEN ASIA STRATEGY, TRANSDISCIPLINARY RESEARCH AND EDUCATION CENTER FOR GREEN TECHNOLOGIES, KYUSHU UNIVERSITY , 9, 517, ISSN:21890420 |
| S Hassan, M S Yusof, Z Embong and M I Maksud (2020) A Study Of Printed La2o3 On Carbon-Glass Substrate For Micro-Flexographic Printing Process Using Angle Resolve X-Ray Photoelectron Spectroscopy (Arxps) Analysis, JOURNAL OF NUCLEAR AND RELATED TECHNOLOGIES, MALAYSIAN NUCLEAR SOCIETY (MNS) , 6, 8, ISSN:18230180 |
| S. Hassan, M.S. Yusof, Z. Embong, S. Ding and O.M.F. Marwah (2020) A Study Of Printing Plate Mould Development By Using 3d Printers For Micro-Flexographic Printing Process, JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (JAMT), UNIVERSITI TEKNIKAL MALAYSIA MELAKA (UTEM) , 6, 1, ISSN:19853157 |
| Faraj Saeid Adrees Majeed, Mohd Azlan Suhaimi, Nordin Bin Mohd Yusof, Walid Nabgan, Rosli Bin Ahmad, Mohammed Basher Asmael, Mohd Sallehuddin Hj.Yusof Suhail Najm Abdullahd (2020) Effect Of Combined Ce And Er Addition On Solidification, Microstructure Of The Al-7si-Alloy, JOURNAL OF ADVANCED MECHANICAL ENGINEERING APPLICATIONS, UTHM , 1, 36, ISSN:27166201 |
| R. Ahmad, M. H. S. Rashid, Sulaiman Hasan, Z. Harun, M. S. Yusof, Suhaimi Hassan, M.M. Rahman (2020) The Effect Of Holmium On Microstructure And Mechanical Properties Of Light Metal Alloy, JOURNAL OF CRITICAL REVIEWS, INNOVARE ACADEMICS SCIENCES PVT. LTD , 7, 1260, ISSN:23945125 |
| S Hassan, M S Yusof, Z Embong, Q E Kamarudin, R H A Haq, M Ibrahim, K R Khairilhijra, O M F Marwah, N Sa'ude, M Ismon and M A Madlan (2019) A Study Of Frequency And Pulses For Stepper Motor Controller System By Using Programmable Logic Controller, JOURNAL OF PHYSICS, Institute of Physics Publishing , 3, 1, ISSN:17426588 |
| M Sallehuddin Yusof, M Zul Nadzmi Fadilullah, Suhaimi Hassan , M Idris Maksud, Muhamad Zaini Yunos (2018) Development Of Coated Peanut Separator And Frying Skillet Machine, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING: SPECIAL ISSUE 2018: MECHANICAL, UTHM , 10, 142, ISSN:2229838X |
| S Hassan, MS Yusof, Z Embong, S Ding, MI Maksud (2018) Surface Study Of Graphene Ink For Fine Solid Lines Printed On Bopp Substrate In Micro-Flexographic Printing Using Xps Analysis Technique, MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 2, 012012-1, ISSN:1757899X |
| S. Hassan, M.S. Yusof, M.I. Maksud, M.N. Nodin, K.A. Mamat, M.S. Sazali, W.I.S. Zainun, M.Z. Rahim and M.H. Rahman (2017) A Study Of Pdms Printing Plate For Fine Solid Lines Image In Micro-Flexographic Printing Process, JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Medwell Journal , 12, 5644, ISSN:1816949X |
| Zainon Binti Mat Sharif, Norhasnina Binti Mohd Taib, Mohd Sallehuddin Bin Yusof, Mohammad Zulafif Bin Rahim, Abdul Latif Bin Mohd Tobi, Mohd Syafiq Bin Othman (2017) A Study On Shelf Life Prolonging Process Of Chili Soy Sauce In Malaysian Smes? (Small Medium Enterprise), IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012026-1, ISSN:1757899X |
| K. A. Mamat, M.S. Yusof, Wan Fauziah Wan Yusoff, M. Zulafif Rahim, S. Hassan, M Qusyairi. A. Rahman, M. A. Abd Karim (2017) Dehydration Of Traditional Dried Instant Noodle (Mee Siput) Using Controlled Temperature &Amp;Amp; Humidity Dryer, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012009-1, ISSN:1757899X |
| Zainon Binti Mat Sharif, Norhasnina Binti Mohd Taib, Mohd Sallehuddin Bin Yusof, Mohammad Zulafif Bin Rahim, Abdul Latif Bin Mohd Tobi, Mohd Syafiq Bin Othman (2017) Designation Of Soap Molder Machine And Procedure For Transparent Soap, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 1, ISSN:1757899X |
| M.A. Haikal Ahmad, M. Zulafif Rahim, M. F. Mohd Fauzi, N. Hafizah Azis, A.E Ismail, Mohd Fahrul Hassan, A.M.T. Arifin, M.S. Yusof, and M. Rasidi Ibrahim (2017) Electrical Discharge Machining Of Polycrystalline Diamond Using Copper Electrode - Finishing Condition, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 6, 012019-1, ISSN:1757899X |
| S Hassan, M S Yusof, S Ding, M I Maksud, M N Nodin, K A Mamat, M S Sazali, M Z Rahim (2017) Investigation Of Carbon Nanotube Ink With Pdms Printing Plate On Fine Solid Lines Printed By Micro-Flexographic Printing Method, MATERIALS SCIENCE AND ENGINEERING, IOP , 6, 012017-1, ISSN:17578981 |
| S Hassan, M S Yusof, S Ding, M I Maksud, M N Nodin, K A Mamat, M S Sazali, M Z Rahim (2017) Investigation Of Carbon Nanotube Ink With Pdms Printing Plate On Fine Solid Lines Printed By Micro-Flexographic Printing Method, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012017-1, ISSN:1757899X |
| Zainon Binti Mat Sharif, Norhasnina Binti Mohd Taib, Mohd Sallehuddin Bin Yusof, Mohammad Zulafif Bin Rahim, Abdul Latif Bin Mohd Tobi, Mohd Syafiq Bin Othman (2017) Solving Cracking Phenomenon In Premium Transparent Toilet Soap Production Using Stretched Lldpe Film Wrap, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012015-1, ISSN:1757899X |
| Zainon Binti Mat Sharif, Norhasnina Binti Mohd Taib, Mohd Sallehuddin Bin Yusof, Mohammad Zulafif Bin Rahim, Abdul Latif Bin Mohd Tobi, and Mohd Syafiq Bin Othman (2017) Study On Handing Process And Quality Degradation Of Oil Palm Fresh Fruit Bunches (Ffb) , IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 6, 012027-1, ISSN:1757899X |
| S. Hassan, M. S. Yusof, Z. Embong, M. I. Maksud (2017) Surface Adhesion Study Of La2o3 Thin Film On Si And Glass Substrate For Micro-Flexography Printing, ADVANCING NUCLEAR SCIENCE AND ENGINEERING FOR SUSTAINABLE NUCLEAR ENERGY KNOWLEDGE, AIP , 1, 04006-1, ISSN:0094243X |
| N. Hafizah Azis , M. Zulafif Rahim, Nasuha Sa?ude, N. Rafai, M.S. Yusof, ALM Tobi, ZM Sharif, M. Rasidi Ibrahim, A.E Ismail (2017) The Influence Of Injection Molding Parameter On Properties Of Thermally Conductive Plastic, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012018-1, ISSN:1757899X |
| m.s.yusof (2016) A Study Of Micro To Nano Structure Fine Solid Line Printing Graphene Ink By Micro-Flexographic Printing Method, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING , iaras , 6, 109, ISSN:23678968 |
| SUHAIMI HASSAN, MOHD SALLEHUDDIN YUSOF, MOHD IDRIS MAKSUD, MUHAMAD NOR NODIN (2016) A Study Of Micro To Nano Structure Fine Solid Line Printing For Graphene Ink By Micro-Flexographic Printing Method, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING, IARAS , 12, 109, ISSN:23678968 |
| Suhaimi bin Hassan, Mohd Sallehuddin bin Yusof, Idris bin Maksud, Mohamad Nor bin Nodin (2016) Investigation Of Micro-Flexographic Printing Method In Fine Solid Lines Printing Structure By Graphene Ink, INTERNATIONAL JOURNAL OF MATERIALS, NORTH ATLANTIC UNIVERSITY UNION , 10, 98, ISSN:23130555 |
| Maksud M.I., Nodin M.N., Yusof M.S., Hassan S. (2016) Utilizing Rapid Prototyping 3d Printer For Fabricating Flexographic Pdms Printing Plate, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 6, 7728, ISSN:18196608 |
| S.Hassan (2015) A Feasibility Study Of Roll To Roll Printing On Graphene, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 7, 402, ISSN:16609336 |
| M.S.Yusof (2015) A Feasibility Study Of Roll To Roll Printing On Graphene, APPLIED MECHANICS AND MATERIAL, Trans Tech Publication Switzerland , 10, 402, ISSN:16627482 |
| M.S.Yusof (2015) Characterization Of Multiple Functional Solid Line Of Graphite Ink Surface Printed By Micro-Flexographic, APPLIED MECHANICS AND MATERIAL, Trans Tech Publication, Switzerland , 4, 1379, ISSN:16627482 |
| M.S.Yusof (2015) Feasibility Study : Investigation Of Polymer Nano-Composites (Pnc) Material For Biomedical Application Via Fused Deposition Modelling (Fdm) Routes, APPLIED MECHANICS AND MATERIAL, Trans tech Publication, Switzerland , 7, 267, ISSN:1662-7482 |
| A.M.Ahmad Zaidi, H.Abdul Hamid, M.I. Ghazali, I.Abdul Rahman, S. Mahzan and M.S.Yusof (2009) Finite Element Simulation On Damage And Fracture Properties Of A Ring Cut From Filament-Wound Pipes With And Without Delamination, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 61, ISSN:2229838X |
| Prosiding / Seminar |
| Z Embong, S Shahudin, S Hassan, M S Yusof, S Mahzan, S Shamsuddin, N K Othman and M A A Mohd Salleh (2021) A Study Of Geo-Polymer As Alternative Material In Automotive Brake Pad, AIP CONFERENCE PROCEEDINGS , 1, ISBN:9780735440913 |
| S Hassan, M Z I Jumari, M A A Sahari, M A M Bahtiar, M H Jaafar, M A M Nadir, M S M Zakaria, M S Yusof, M Ismon, H Zakaria, M A Azmi, N M Yusof and M S Ikhsan (2021) A Study Of Sensor Signal Danger Detector System Using Arduino Programming Method, AMERICAN INSTITUTE OF PHYSICS INC. , 020041-1, ISBN:9780735440913 |
| Suhaimi Hassan, Mohd Sallehuddin Yusof, Zaidi Embong, Mohamad Zhairul Iqumal Jumari, Maznan Ismon, Hanis Zakaria, Mohammad Zulafif Rahim, Rosli Ahmad and Engku Mohd Nasri Engku Nasir (2020) A Preliminary Study Of Additional Safety Mechanical Structure For Safety Shoe, SPRINGER , 577, ISBN:9789811382963 |
| Suhaimi bin Hassan, Mohd Sallehuddin bin Yusof, Zaidi bin Embong (2019) Angle Resolve X-Ray Photoelectron Spectroscopy Analysis Of La2o3 Thin Film Of Mixed Carbon-Glass And Carbon-Silicon Substrate For Micro-Flexographic Printing Process, IOP PUBLISHING LTD , 1, ISBN:1757899X |
| HAQ R.H.A., KHAIRILHIJRA K.R., WAHAB M.S., SA'UDE N., IBRAHIM M., MARWAH O.M.F., YUSOF M.S., RAHMAN M.N.A., ARIFFIN A.M.T., HASSAN M.F., YUNOS M.Z., ADZILA S. (2017) Pcl/Pla Polymer Composite Filament Fabrication Using Full Factorial Design (Doe) For Fused Deposition Modelling, INSTITUTE OF PHYSICS PUBLISHING , -, ISBN:17426596 |
| S. Hassan, , M. S. Yusof, , Z. Embong, and , and M. I. Maksud (2017) Surface Adhesion Study Of La2o3 Thin Film On Si And Glass Substrate For Micro-Flexography Printing, AIP Conference Proceedings , 1, ISBN:9780735414679 |
| M. Zulafif Rahim, M. S. Yusof, E. A. Rahim, Rasidi Ibrahim, and Z. Mohid (2017) Wire-Cut Edm Of Sisic-Preliminary Investigation In Machining Parameter, American Institute of Physics , 020052-1, ISBN:978-0-7354-1499 |
| S. Hassan, M. S. Yusof, Z. Embong, M. I. Maksud (2016) Angle Resolved X-Ray Photoelectron Spectroscopy (Arxps) Analysis Of Lanthanum Oxide For Micro-Flexography Printing, AIP , 04002-1, ISBN:0094243X |
| Mohd Sallehuddin Yusof, Suhaimi Hassan, Mohd Idris Maksud, Muhamad Nor Nodin, Khairul Anuar Mamat, Mohd Safwan Sazali, Wan Intan Safian Meor Zainun,Mohammad Zulafif Rahim (2016) Development Of Nickel Master For Imprint Lithography Printing Process, sciencedirect , 2214 , ISBN:- |
| Suhaimi Hassan, Mohd Sallehuddin Yusof, Mohd Idris Maksud, Muhamad Nor Nodin, Khairul Anuar Mamat, Mohd Safwan Sazali, Wan Intan Safian Meor Zainun, Mohammad Zulafif Rahim (2016) Optimization Of Parameter Setting For Fine Solid Line Image In Micro-Flexographic Printing Process, sicence direct , 2247 , ISBN:- |
| S.Hassan (2015) A Feasibility Study Of Roll To Roll Printing On Graphene, Trans Tech Publications, Switzerland , ISBN:9783038356318 |
| M.S.Yusof (2015) A Sutdy On Nanostructure By Roll To Roll Imprint Lithography, IEEE |
| M.S.Yusof (2015) Temperature And Humidity Determination Study Of Drying Machine In Traditional Dried Instant Noodle (Mi Siput) For Small And Medium Industry (Sme), FKMP, UTHM |
| M.S.Yusof (2015) Utilizing Rapid Prototyping 3d Printer For Fabricating Flexographic Pdms Printing Plate, UTHM |
| MAKSUD M.I., YUSOF M.S., JAMIL M.M.A. (2014) An Investigation Onto Polydimethylsiloxane (Pdms) Printing Plate Of Multiple Functional Solid Line By Flexographic, TRANS TECH , 158, ISBN:1662-8985 |
| M.S.Yusof (2014) Feasibility Study: Investigation Of Polymer Nano-Composites (Pnc) Material For Biomedical Application Via Fused Deposition Modelling (Fdm) Routes, UTHM , ISBN:21803722 |
| M. I. Maksud, M.S. Yusof, M. Mahadi Abd. Jamil (2013) An Investigation Of Parameter Effect On Microcontact Printing And Feasibility Study For Application In Microelectronic And Biomedical, IEEE , 1, ISBN:9781479914678 |
| M.I. Maksud, M.S. Yusof, M. Mahadi Abdul Jamil (2013) Optimizing A Polydimethylsiloxone(Pdms) Into Flexographic Printing Process For Rfid Biomedical Devices And Cell Cultures, IEEE , 1, ISBN:9781479914678 |
| Mohd Sallehuddin Bin Yusof (2012) A Study On Multiple Fine Solid Lines By Flexographic Printing In Printed Antennas For Rfid (Radio Frequency Identification) Transponder: An Overview, UTHM |
| Mohd Sallehuddin Bin Yusof (2012) A Study On Multiple Fine Solid Lines By Flexographic Printing In Printed Antennas For Rfid Transponder : An Overview, UTHM |
| Mohd Sallehuddin Bin Yusof (2012) An Investigation Into Printing Processes And Feasibility Study For Rfid Tag Antennas, UTHM |
| M.S.Yusof (2012) Cost Reduction Through Value Engineering Practices In Manufacturing Assembly, UTHM |
| Mohd Sallehuddin Bin Yusof (2012) Exploration Of Fine Line'S Profile Effects In Flexographic Printing, UTHM |
| M.S.Yusof (2011) Investigation Of Carbon Black Ink On Fine Solid Line In Flexography, Elsavier |
| Mohd Sallehuddin Bin Yusof (2009) Investigation Of Carbon Black Ink On Fine Solid Line Printing In Flexography For Electronic Applications, Institute for Colour, Science and Technology |
| Mohd Sallehuddin Bin Yusof (2008) Application Of Finite Element On Non Linear Deformation Of Flexographic Photopolymer Printing Plate, International Association of Engineers |
| Mohd Sallehuddin Bin Yusof (2008) Penetration Depth Prediction In Mesh-Less Metal Targets, International Association of Engineers |
| Mohd Sallehuddin Bin Yusof (2007) An Investigation Into Deformation Of Photopolymer Plate During Printing Solid Lines In Flexography, Taylor and Francis |
| Mohd Sallehuddin Bin Yusof (2007) Exploring Fine Line Printing Reproduction In Flexography, ESPRC, |
| Mohd Sallehuddin Bin Yusof (2007) The Effects Of Anilox Roller On Fine Line Printing In Flexographic Printing Process, Verlag Fur Wisssensschaft und Forschung, Berlin |
| Mohd Sallehuddin Bin Yusof (2007) The Effects Of Printing Plate On The Reproduction Of Fine Solid Line Printing In Flexography, Verlag fur Wissenschaft und Forschung, Berlin |
| Mohd Sallehuddin Bin Yusof (2006) Fine Line Printing By Flexography, swansea university |
| Mohd Sallehuddin Bin Yusof (2006) Fine Line Printing By Flexography Printing |
| Mohd Sallehuddin Bin Yusof (2006) Fine Line Printing For The Reproduction Of Electrical Devices, Welsh Centre for Coating and Printing |
| Mohd Sallehuddin Bin Yusof (2006) Investigation Into Ultra Fine Solid Lines In Flexographic Printing, Malaysian International Reseach Group |
| Mohd Sallehuddin Bin Yusof (2005) Measuring Solid Line Geometry On Flexographic Photopolymer Printing Plates |
| Mohd Sallehuddin Bin Yusof (2005) Printing Of Conductive Tracks By Flexograhy Process |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2016 | Reviewer for "International Conference on Mechanical Engineering" ICME16 conference. | International |
| 2015 | Facilitator for Entrepreneurship Workshop Course, Puteri Resort Ayer Keroh Melaka , May 2015 | University |
| 2015 | Appointed Facilitator for Private Public Research Network (PPRN) by CBER, UTHM Oct 2015 | University |
| 2015 | Journal Reviewer for International Conference on Mechanical Engineering (ICME2015), UTHM | International |
| 2015 | Post Doctoral - IBM Research Center, San Jose, USA / NanoMalaysia Berhad & MOSTI 21042015 | International |
| 2015 | Facilitator for Workshop & Seminar Public Private Research Network (PPRN) Katerina Hotel Batu Pahat Johor, March 2015 | Government |
| 2015 | Invited Speaker for Public Private Research Network (PPRN) Workshop, Universiti Malaysia Sarawak (UNIMAS) , Nov 2015 | Government |
| 2015 | Matching Expert and Facilitator for Workshop & Seminar Public Private Research Network (PPRN) Universiti Malaysia Pahang, April 2015 | Government |
| 2015 | Invited Speaker & Facilitator MechyPreneur Program 2015, FKMP, Mersing Johor, Oct 2015 | University |
| 2014 | Journal Reviewer for International Conference on Mechanical Engineering (ICME14) 2014 | International |
| 2014 | Journal Reviewer for International Integrated Engineering Summit (IIES 2) 2014 | International |
| 2013 | Journal Reviewer for International Conference on Mechanical Engineering ICME 2013 | International |
| 2013 | Certified Energy Manager by Asean Energy Management Scheme (AEMAS) | International |
| 2013 | Facilitator for Transformational Leadership Programme for Young Lecturers, Port Dickson, July 2013 | Government |
| 2012 | Session Chairman for 3rd International Conference on Mech and Mfg, ICME2013, UTHM 2013 | International |
| 2012 | Facilitator for Transformational Leadership Programme for Young Lecturers, Janda Baik, May 2012 | Government |
| 2012 | Editorial Board for Journal of Mechanics and Material, Trans tech Publication, Switzerland | International |
| 2012 | Editor for International Conference on Mechanical Engineering (ICME2012) | International |
| 2012 | Editor for International Conference on Mechanical Engineering (ICME2012) | International |
| 2011 | Member of UTHM's Strategic Energy Management Plan, Sustainable Campus Unit UTHM | University |
| 2011 | Reviewer for Unikl BMI Journal of Engineering Technology, University Kuala Lumpur | International |
| 2011 | Reviewer for Diges Spin 2 Malaysian Polytechnic Conference, Kuching Polytechnic, Sarawak | National |
| 2011 | Invited Speaker for Industry and Technical and Vocational Education Seminar, University Technology Malaysia | University |
| 2011 | Facilitator for Transformational Leadership Programme for Young Lecturers, Janda Baik, April 2012 | National |
| 2008 | Session Chairman at World Congress on Engineering, Imperial College, London 2008 | International |
Supervision
| Year | Description | Role |
|---|---|---|
| 2016 | Supervisor for Majeed Faraj Saed, Master Degree Dissertation Project, UTHM 2016 | Supervisor |
| 2016 | Assesor for Muheieddin M farag Elgahnudi Phd Colloqium 2, Sem II 2015/2016, UTHM | Assessor |
| 2016 | Assesor for Ashraf Mahmood M.El Aswad Phd Colloqium 1, Sem II 2015/2016, UTHM | Assessor |
| 2016 | Assesor for Zayad Mohamed Saad Sheggaf Phd Colloqium 2, Sem II 2015/2016, UTHM | Assessor |
| 2016 | Assesor for Postgraduate Colloquium by Research Studies Sem II 2015/2016, UTHM | Assessor |
| 2016 | Assesor for Postgraduate Colloquium by MSC Studies Sem II 2015/2016, UTHM | Assessor |
| 2016 | Supervisor for Emhemed Ab Abdalla, Master Degree Dissertation Project, UTHM 2016 | Supervisor |
| 2016 | Supervisor for Mohd Safwan Bin Sazali, Master Degree by Reseacrh (MRes), UTHM 2015 | Supervisor |
| 2015 | Main Supervisor for Mohd Safwan Bin Sazali. Master by Research, MRES 2015 | Supervisor |
| 2015 | Supervisor for Nik Muhammad Syahmi Bin Nik Roslan, B. Mech Eng, UTHM 2015 | Supervisor |
| 2015 | Supervisor for Mohamad Nur Bin .Karim, B. Mech Eng, UTHM 2015 | Supervisor |
| 2014 | Supervisor for Dahlia Johari, Master Degree, CEC UTHM, GRADUATED 2014 | Supervisor |
| 2014 | Supervisor for Hafids Zuhdi, Master Degree, CEC UTHM, GRADUATED 2014 | Supervisor |
| 2014 | Supervisor for Ainatul Mardhiah Binti Hj. Zakaria, B.Mech Eng,Uthm, 2014 | Supervisor |
| 2014 | Main Supervisor for Mohd Hashim Bin Ab. Rahman, Master by Research, MRes UTHM 2014 | Supervisor |
| 2014 | Main Supervisor for Suhaimi Bin Hassan, PhD, Universiti Tun Hussein Onn 2014 | Supervisor |
| 2014 | Main Supervisor for Wan Ahmad Saufi, Master by Research, MRES 2014 | Supervisor |
| 2014 | Main Supervisor for Khairul Anwar Bin Mamat, Master by Research MRes, UTHM 2014 | Supervisor |
| 2014 | Supervisor for Julius Anak Apat, Master Degree, CEC UTHM, GRADUATED 2014 | Supervisor |
| 2014 | Supervisor for Jane Daniela Anak Mugan, Master Degree, CEC UTHM, GRADUATED 2014 | Supervisor |
| 2014 | Examiner PhD 1st year Colloqium, Najwa Binti Mustaffa, UTHM | Examiner |
| 2014 | Examiner PhD 1st year Colloqium, Mohd Zaidi Bin Hamzah, UTHM | Examiner |
| 2014 | Supervisor for Khairul Anwar bin Mamat, B. Mech Eng, UTHM 2014 | Supervisor |
| 2014 | Supervisor for Muhammad Firdaus bin Saat, B. Mech Eng, UTHM 2014 | Supervisor |
| 2014 | Supervisor for Asmahani Binti Asad, B. Mech Eng, UTHM 2014 | Supervisor |
| 2014 | Supervisor for Siti Hajjar Zahidah Bte Md. Zain, B. Mech Eng, UTHM 2014 | Supervisor |
| 2013 | Supervisor for Dahlia Johari, Master Degree, CEC UTHM, 2013 | Supervisor |
| 2013 | Supervisor for Hafids Zuhdi Bin Hashim, Master Degree, CEC UTHM, 2013 | Supervisor |
| 2013 | Supervisor for Julius Anak Apat, Master Degree, CEC, UTHM 2013 | Supervisor |
| 2013 | Supervisor for Jane Daniela Anak Mugan, Master Degree, CEC, UTHM 2013 | Supervisor |
| 2013 | Examiner for Master Project 1 Fifi Khazanie Bt. Mohd Nawi | Examiner |
| 2013 | Examiner PhD 1st year Colloqium, Rosli Gin Asmawi, UTHM | Examiner |
| 2013 | Main Supervisor for Mohd Nor Bin Nodin, Master by Research | Supervisor |
| 2013 | Supervisor for Shaiful Nizam bin Haji Shamsuddin, B. Mech Eng, UTHM 2013 | Supervisor |
| 2013 | Supervisor for Mohd Hanif bin Md Noh, B. Mech Eng, UTHM 2013 | Supervisor |
| 2013 | Supervisor for Roslina Binti Ab Rashid, B. Mech Eng, UTHM 2012 | Supervisor |
| 2013 | Examiner for Master Project 2 for Mr. Hazriel Faizal bin Pahroraji | Examiner |
| 2013 | Examiner for postgraduate colloquium Master Tuanku Syed Sirajuddin Polytechnic, Perlis for Master Project 1, 14 students Sem II 2012/2013, CEC UTHM | Examiner |
| 2013 | Examiner for postgraduate colloquium Master Kuching Polytechnic, Sarawak for Master Project 1, Sem II 2012/2013, CEC UTHM | Examiner |
| 2013 | Main Supervisor for Noor Azlina Binti Rejab Master by Research, MRES 2013 | Supervisor |
| 2013 | Supervisor for Wan Ahmad Saufi bin Md Nasri, B. Mech Eng, UTHM 2013 | Supervisor |
| 2012 | Supervisor for Mohamad Ali Saharudin, B.Mech Eng. UTHM 2012 | Supervisor |
| 2012 | Supervisor for Afiqah Bte Ab.Majid, B. Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Supervisor for Norfarahain Bte Mohd. Salleh, B. Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Supervisor for Nordiyana Binti Safie, B Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Main Supervisor for Mohd Idris Maksud, PhD, Universiti Tun Hussein Onn, 2012 | Supervisor |
| 2012 | Supervisor for Mohd Syamsul Amri bin Arazmi, B. Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Examiner for Master Project 1 for Mr. Hazriel Faizal bin Pahroraji | Examiner |
| 2012 | Supervisor for Mohamad Amirul Syahid, B. Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Supervisor for Muhammad Hafizuddin bin Mohd Daud, B. Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Assesor for International Conference on Mechanical Engineering ICME2012 | Assessor |
| 2012 | Supervisor for Mohd Lokman Bin Mohamad Zain, B. Mech Eng, UTHM 2012 | Supervisor |
| 2012 | Examiner for Master Project 1 Mr. Khairu bin Kamarudin | Assessor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2016 | Reviewer for "Technology and Innovation National Conference 2016" - TECHRON2016-61 | National |
| 2015 | Ahli Jawatankuasa Pemeriksa Pelupusan Aset Alih Universiti Tun Hussein Onn, Jan 2015 | University |
| 2015 | Ahli Jawatankuasa Kecil Latihan Industri & Mobiliti, FKMP, Jan 2015 | University |
| 2015 | Sekretariat dan Tenaga Pembimbing Program Mechypreneur, FKMP UTHM, April 2015 | University |
| 2015 | Ahli Jawatankuasa Kecil Penasihatan Akademik FKMP, UTHM, Jan 2015 | University |
| 2014 | Invited speaker for Seri Kenangan Segamat (Kluster Inovasi) Primary School, 2104 | Government |
| 2014 | Subject Coordinator for Bachelor Degree Project II BDA49104/BDA4914 Sem II 2013/2014 | University |
| 2014 | Subject Coordinator for Bachelor Degree Subject BDA10602 Creativity and Innovation Sem II 2013/2014 | University |
| 2013 | Advisor for Parit Hj.Hassan High School in Wireless Lorries' 3rd Brake lamp in National Competition in Creativity and Innovative Project | National |
| 2012 | Appointed as UTHM Representative by Higher Education Leadership Academy AKEPT | Government |
| 2012 | Chairman for SUMO ROBOT Competition, UTHM | University |
| 2012 | Head Facilitator for International Sustainability Camp for Children 2012 | International |
| 2011 | Program Kesedaran Hakisan Pantai dan Penanaman Semula Pokok Bakau | University |
| 2011 | Journal reviewer for Malaysian Polytechnic DIGES SPIN 2011 held in Kuching, Sarawak | International |
Courses & Training
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2022 | KURSUS MESIN KONVENSIONAL CYLINDRICAL GRINDING UTHM / Makmal Pemesinan Larik, FKMP, UTHM | 13/03/2022 - 14/03/2022 |
| 2022 | FORUM C.ENG TO P.ENG - EXPERIENCE SHARING FKMP,UTHM / GOOGLE MEET | 10/03/2022 |
| 2022 | KURSUS MESIN CNC CYLINDRICAL GRINDING UTHM / Makmal Pembuatan Deras, FKMP, UTHM | 08/03/2022 - 09/03/2022 |
| 2022 | BUAL BICARA PNC PERANCANGAN STRATEGIK DAN KUALITI : HALA TUJU FKMP 2022 DARIPADA PERSPEKTIF UTHM GTU2030 FKMP,UTHM / ATAS TALIAN | 12/01/2022 |
| 2020 | KURSUS PERSEDIAAN PENSYARAH, JURUTERA PENGAJAR DAN PEMBANTU JURUTERA UNTUK MENDAPATKAN SIJIL KEMAHIRAN MALAYSIA (SKM) TAHAP 2 DAN TAHAP 3 MELALUI PENCAPAIAN TERDAHULU FPTV / SEMINAR SERI SIANTAN | 26/10/2020 - 27/10/2020 |