Staff Profile
Full Name | Ts. Dr. MUHAMMAD FAISAL BIN MAHMOD |
---|---|
Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Department | JABATAN KEJURUTERAAN MEKANIKAL |
Designation | DS51 - PENSYARAH KANAN |
PENYELIDIK UTAMA STRUCTURAL INTEGRITY AND MONITORING RESEARCH GROUP FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Field of Expertise
Field Category (KPT) | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
---|---|
Field (KPT) | Engineering Science and Technology |
Field of Specialization (KPT) | Engineering Science and Technology |
Areas of Research Interest
1. | Non-destructive testing for structural integrity monitoring |
2. | Automated control system |
3. | Machine vision |
Innovation Field of Interest
1. | Non-destructive testing |
2. | Applied engineering control system |
Academic Qualification
Year | Qualification | Institution |
---|---|---|
2018 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | UNIVERSITI SAINS MALAYSIA |
2012 | SARJANA KEJURUTERAAN MEKANIK | UNIVERSITI KEBANGSAAN MALAYSIA |
2008 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
2005 | DIPLOMA KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
Professional Appointments
DS51 - Pensyarah Kanan |
Management Experience
Date | Description |
---|---|
01/01/2021 - 31/12/2022 | Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Structural Integrity and Monitoring Research Group |
01/01/2020 - 30/06/2021 | Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Structural Integrity and Monitoring Research Group |
Professional Societies
Year | Description | Role | Level |
---|---|---|---|
28/10/2009 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
05/03/2010 - 05/02/2011 | The Institution of Engineers, Malaysia (IEM)
| GRADUATE MEMBER | Kebangsaan |
01/01/2011 - 31/12/2011 | The Institution of Engineers, Malaysia (IEM)
| GRADUATE MEMBER | Kebangsaan |
27/01/2020 - 26/01/2021 | Malaysia Board of Technologists (MBOT)
| Teknologis Profesional | Kebangsaan |
01/01/2019 - 31/12/2019 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
27/01/2019 - 26/01/2020 | Malaysia Board of Technologists (MBOT)
| Teknologis Profesional | Kebangsaan |
01/01/2012 - 31/12/2012 | The Institution of Engineers, Malaysia (IEM)
| Graduate Member | Kebangsaan |
Teaching Experience
Year | Description | Level |
---|---|---|
2018 | Engineering Laboratory VI [BDA 37301], Session 20172018 Semester II, Universiti Tun Hussein Onn Malaysia, 2018 | University |
2018 | Applied Measurement and Instrumentation [MDC 11003], Session 20182019 Semester II, Universiti Tun Hussein Onn Malaysia, 2018 | University |
2018 | Applied Measurement and Instrumentation [MDC11003], Session 20182019 Semester I, Universiti Tun Hussein Onn Malaysia, 2018 | University |
2018 | Engineering Mathematics IV [BDA 34003], Session 20182019 Semester I, Universiti Tun Hussein Onn Malaysia | University |
2018 | Engineering Mathematics IV [BDA 34003], Session 20172018 Semester II, Universiti Tun Hussein Onn Malaysia, 2018 | University |
2012 | Mekanik Mesin [BDA 20303], Sesi 2011/2012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 | University |
2012 | Makmal Kejuruteraan 3 (BDA 27101), Sesi 2011/2012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 | University |
2012 | Mekanik Mesin [BDA 20303], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 | University |
2012 | Dinamik [BDA 20103], Sesi 2012/2013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 | University |
2010 | Makmal Kejuruteraan 1 (BDA 1701), Sesi 2009/2010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
2010 | Makmal Kejuruteraan V (BDA 3701), Sesi 2009/2010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
2010 | Makmal Kejuruteraan III (BDA 2711), Sesi 2009/2010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 | University |
2010 | Amalan Kejuruteraan Mekanikal (DDA 1822), Sesi 20092010 Semester 3, Universiti Tun Hussein Onn malaysia, 2010 | University |
2009 | Makmal Kejuruteraan V (BDA 3701), Sesi 2009/2010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
2009 | Makmal Kaedah Unsur Terhingga (BDA 4033), Sesi 2009/2010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
2009 | Makmal Kejuruteraan IV (BDA 2721), Sesi 2009/2010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 | University |
Research Grants And Contracts
Code | Title | Designation | End Date |
---|---|---|---|
H925 | Residual Stress and Deformation Analysis of Steel Sleeve Repair Welding of API 5L X65 Specification in Gas Pipeline using a simulation approach | Ketua | 30/06/2023 |
K152 | Modification of Thermal Spray Coating HVOF Deposition Parameters to Mechanical Properties of Carbon Steel | Ahli | 31/05/2022 |
X149 | Non Desfructive Testing: Ultrasonic Testing NDT- OT Certification | Ketua | 31/12/2020 |
H181 | FATIGUE PERFORMANCE OF TUNGSTEN CARBIDE THERMAL SPRAY COATING ON CARBON STEEL FOR DIGESTER APPLICATION | Ahli | 30/09/2020 |
Publications
General Publications |
---|
M F Mahmod (2020) Program Peperiksaan Cswip Welds Ultrasonics Level 2, UTHM , 21, ISBN:- |
Journal |
Nurul Farahin Mohd Joharudin, Noradila Abdul Latif, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Muhammad Faisal Mahmod (2020) Effect Of Burning Temperature On Rice Husk Silica As Reinforcement Of Recycled Aluminium Chip Aa7075, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, PENERBIT AKADEMIA BARU , 3, 125, ISSN:22897879 |
M.A.M. Halmi, M.A. Harimon, A.L. Mohd Tobi, M.F. Mahmod (2019) Fatigue Performance Of Thermal Spray Coatings On Carbon Steel: A Review, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY, IAEME Publication , 3, 1285, ISSN:09766359 |
M. F. Mahmod, Elmi Abu Bakar, Raiminor Ramzi and M. F. Zainal Abidin (2017) Low-Level Processing Approach Using Gui For Ultrasonic C-Scan Defects Determination Of Composite Material, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , Asian Research Publishing Network (ARPN) , 2, 1354, ISSN:18196608 |
M. F. Mahmod, Elmi Abu Bakar and M. Z. Mohamed Pauzi (2017) Ultrasonic Transducer Attenuation Behaviour Of Fiber Glass Composite Laminates (Fgcl) Through Signal Filtering Approach, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 2, 1286, ISSN:18196608 |
M.F.Mahmod, Elmi Abu Bakar & A. R. Othman (2016) Defect Detection Of Fiberglass Composite Lamiantes (Fgcl) With Ultrasonic A-Scan Signal Measurement, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing Ltd , 2, 1, ISSN:1757899X |
M. F. Mahmod & Elmi Abu Bakar (2016) Dimensional Measurement Of Composite Laminates Plate Thru Single Crystal Immersion Transducer And Ultrasonic Rangefinder Transducer, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 3, 3610, ISSN:18196608 |
M. F. Mahmod, Elmi Abu Bakar, A.R. Othman, A.R. Ramzi, CY Goh (2015) Fiber Glass Composite Laminates (Fgcl) Measurement Using 3 Axis Pulse Echo Scanning Unit, JURNAL TEKNOLOGI, Universiti Teknologi Malaysia , 8, 147, ISSN:21803722 |
Raiminor Ramzi, M.F. Mahmod and Elmi Abu Bakar (2015) Immersion Ultrasonic Inspection System For Small Scaled Composite Specimen, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCE, Asian Research Publishing Network (ARPN) , 12, 17146, ISSN:18196608 |
Media Digital |
M Faisal Mahmod (2021) E1: Deflection Of Cantilever Beam For Engineering Lab Vi (Bda 37301), UTHM , ISBN:- |
M Faisal Mahmod (2021) E2: Buckling Of Struts For Engineering Lab Vi (Bda 37301), UTHM , ISBN:- |
M Faisal Mahmod (2021) E3: Bending Of Beam For Engineering Lab Vi (Bda 37301), UTHM , ISBN:- |
M Faisal Mahmod (2021) E4: Curve Bar And Davits For Engineering Lab Vi (Bda 37301), UTHM , ISBN:- |
M Faisal Mahmod (2021) E5: Thick Cylinder For Bda 37301 Course, UTHM , ISBN:- |
Prosiding / Seminar |
Muhammad Faiz Hakimi Mukhtar, M. F. Mahmod (2021) Simulation Analysis Of Ultrasonic Testing In Steel-Based Butt Weld Joint , UTHM , 136, ISBN:27734765 |
Nurul Farahin Mohd Joharudin, Noradila Abdul Latif, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Muhammad Faisal Mahmod (2020) Physical Properties And Hardness Of Treated Amorphous Silica As Reinforcement Of Aa7075 Recycled Aluminum Chip , IOP PUBLISHING , 1, ISBN:17578981 |
M. F. Mahmod; Elmi Abu Bakar; Raiminor Ramzi; Mohd Azhar Harimon; N. Abdul Latif; Mohammad Sukri Mustapa; Al Emran Ismail (2019) Artificial Neural Network Application For Damages Classification In Fibreglass Pre-Impregnated Laminated Composites (Fglc) From Ultrasonic Signal, SPRINGER, SINGAPORE , 567, ISBN:9789811364 |
Raiminor Ramzi; Elmi Abu Bakar; M. F. Mahmod (2019) Drill Bit Flank Wear Monitoring System In Composite Drilling Process Using Image Processing, SPRINGER, SINGAPORE , 551, ISBN:9789811364 |
Mohd Akmal Abdullah, M. F. Zainal Abidin, Elmi Abu Bakar, M. F. Mahmod (2016) Feature Analysis Thru Image Recognition Of C-Scan Image For Composite Laminated Materials, Politeknik Sultan Abdul Halim Mu'adzam Shah , ISBN:9789670830186 |
A. R. Ramzi, M. F. Mahmod, Elmi Abu Bakar (2014) Hybrid Stepper Motor Linear Motion Performance For Ultrasonic Application, Politeknik Seberang Perai, Pulau Pinang, Malaysia , ISBN:9789671245934 |
CY Goh, M. F. Mahmod and Elmi Abu Bakar (2014) Study On Multilayer Scanning Array Units Performance Using Ultrasonic Transducer, Politeknik Seberang Perai, Pulau Pinang, Malaysia , ISBN:9789671245934 |
Consultancies
Year | Description | Level |
---|---|---|
2018 | Academic consultive for master of mechanical engineering program (Applied Measurement and Instrumentation) Session II 2017/2018 | University |
2010 | Pengerusi Seminar PSM 2, Jabatan Kej Mekanik, FKMP, Universiti Tun Hussein Onn Malaysia, 2010 | University |
2010 | Pembantu Pengawas Peperiksaan Semester 2 Sesi 20092010 | University |
2009 | Pembantu Pengawas Peperiksaan Semester 1 Sesi 20092010 | University |
2009 | Penasihat Akademik (20 Pelajar), FKMP, Universiti Tun Hussein Onn Malaysia, 19/10/2009 - sekarang | University |
2009 | Pengerusi Seminar PSM 1, Jabatan Kej Mekanik, FKMP, Universiti Tun Hussein Onn Malaysia, 2009 | University |
Supervision
Year | Description | Role |
---|---|---|
2012 | Assessor for the Bachelor Degree Final Year Project, Faculty of Mechanical and Manufacturing Engineering, UTHM, 2012 | Assessor |
2010 | Diploma Project, Faculty of Mechanical and Manufacturing Engineering (FKMP), UTHM, 2010 | Assessor |
Extension & Public Services
Year | Description | Level |
---|---|---|
2012 | Jawatankuasa Penggambaran Video Bersama Naib Canselor UTHM, 2012 | University |
2012 | Jawatankuasa Pelaksana 1st National Technological Exposition On Rural Innovation 2012 (TECH-RURAL 2012), UTHM, 2012 | National |
2012 | Jawatankuasa Video Korporat FKMP, UTHM, 2012 | University |
2012 | Pengawas Peperiksaan Akhir Sesi 2011/2012 Semester 2, Program Sarjana Muda dan Program Pensiswazahan Guru (PPG), UTHM, 2012 | University |
2010 | National Conference On Advanced Manufacturing And materials (NAMME) 2010 | National |
2010 | Program Lestari Cemerlang 2010, FKMP, Universiti Tun Hussein Onn Malaysia | University |
2010 | Water Rocket challege 2010, UTHM | University |
2009 | International Symposium On Current Research And Advancement On Textile And Packaging Technology, 2009 | International |
2009 | Gearing For Success 2009, FKMP, Universiti Tun Hussein Onn Malaysia | University |
2009 | Water Rocket Challege 2009, UTHM | University |
Courses & Training
Year | Description Organiser / Venue | Date |
---|---|---|
2022 | KULIAH PERDANA - RAMADHAN KEMBALI BERSEMI FKMP,UTHM / ZOOM WEBINAR | 07/04/2022 |
2022 | PROGRAM KAUNSELOR KONGSI ILMU SIRI 1 (TOKSIK TEMPAT KERJA : AKU ATAU PERSEKITARAN) UTHM / PLATFORM GOOGLE MEET | 29/03/2022 |
2022 | PROGRAM BUAL BICARA STAF FKMP BERSAMA DATO' SRI IBRAHIM B.AHMAD- LEMBAGA PENGARAH UTHM SECARA HIBRID FKMP,UTHM / YOUTUBE (HIBRID) | 26/01/2022 |
2022 | BUAL BICARA PNC PERANCANGAN STRATEGIK DAN KUALITI : HALA TUJU FKMP 2022 DARIPADA PERSPEKTIF UTHM GTU2030 FKMP,UTHM / ATAS TALIAN | 12/01/2022 |
2021 | PRA BENGKEL LAPORAN PENCAPAIAN BAGI TAHUN 2021 DAN SASARAN KERJA TAHUNAN (SKT) BAGI TAHUN 2022 FKMP,UTHM / BILIK LESTARI 2 ARAS 3 PPTA | 26/12/2021 |
2021 | KURSUS SCREENCASTING UTHM / ZOOM | 26/10/2021 |
2021 | 11TH INTERNATIONAL CONFERENCE IN MECHANICAL AND MANUFACTURING ENGINEERING 2021 (ICME '21) UTHM / Secara atas talian | 25/08/2021 - 26/08/2021 |
2021 | SESI PERKONGSIAN BERKAITAN GERAN KOMERSIAL BERSAMA DR. MARIAM - UTM UTHM / Aplikasi Zoom : https://bit.ly/SESIPERKONGSIANGERANKOMERSIAL | 08/07/2021 |
2021 | SESI PERKONGSIAN ILMU : PERMOHONAN GERAN KONSORTIUM KECEMERLANGAN PENYELIDIKAN (KKP) FKEE,UTHM / GOOGLE MEET | 12/04/2021 |
2021 | KURSUS OPEN JOURNAL SYSTEM (OJS) BAGI JURNAL & PROSIDING BIL 1/2021 UTHM / MAKMAL KOMPUTER BLOK L, ARAS BAWAH, PTTA | 11/04/2021 |
2021 | TAKLIMAT OUTCOME-BASED EDUCATION: COMPLEX ENGINEERING PROBLEMS AND COMPLEX ENGINEERING ACTIVITIES UTHM / - | 17/03/2021 |
2021 | KURSUS THIN CYLINDER DAN THICK CYLINDER UTHM / G2-052A MAKMAL MEKANIK PEPEJAL | 17/03/2021 |
2021 | PROGRAM BUAL BICARA MYFKMP 2.0: PROSES DAN SISTEM KENAIKAN PANGKAT STAF AKADEMIK UTHM 2022 FKMP,UTHM / ZOOM | 27/01/2021 |
2021 | REDI 2021: SHAPING RESILIENT TALENT LAIN-LAIN / ATAS TALIAN | 11/01/2021 - 12/01/2021 |
2020 | DIALOG SAINS & AGAMA PANDEMIK COVID 19 "ISU DAN HAKIKAT" UTHM / - | 02/12/2020 |
2020 | BENGKEL KONSULTASI & LATIHAN PENGGUNAAN MICROSOFT POWER BI (BUSINESS INTELLIGENCE) UTHM / - | 12/10/2020 - 13/10/2020 |
2020 | SEMINAR CAREER COACH UTHM / - | 30/09/2020 |
2020 | SEMINAR CAREER COACH UTHM / AL JAZARI | 30/09/2020 |
2020 | COMMERCIALIZATION OF RESEARCH AND INNOVATION OUTPUT VIA CROSS BORDER E-COMMERCE PLATFORM UTHM / - | 22/07/2020 |
2020 | OPEN ACCESS AND OPEN RESEARCH UTHM / - | 25/06/2020 |
2020 | MONETIZING YOUR RESEARCH EXPERTISE IN ACADEMIA UTHM / - | 18/06/2020 |
2020 | FORUM ATAS TALIAN ANJURAN MYRIVET : INTERNATIONAL COLLABORATION IN CONSULTATION AND RESEARCH IN POST-PANDEMIC ERA UTHM / , | 18/06/2020 |
2020 | MARKING MADE EASY (BEGINNER) UTHM / - | 15/06/2020 |
2020 | WACANA KOMUNITI : PENJIMATAN ELEKTRIK SEMASA PKP - PUNCA KENAIKAN BIL ELEKTRIK DAN LANGKAH PENJIMATAN DI RUMAH UTHM / - | 14/06/2020 |
2020 | KURSUS GOOGLE SUITE 101 (G-SUITE) PEJABAT PENDAFTAR,UTHM / GOOGLE CLASSROOM | 10/06/2020 |
2020 | OPTION 1 SAKURA SCIENCE FUND JAPAN : PERKONGSIAN KAEDAH PERMOHONAN DAN SKOP DANA UTHM / - | 10/06/2020 |
2020 | COVID19 - CRISIS MANAGEMENT ISSUES AND SOCIO-ECONOMIC IMPACT LESSON LEARNED FORM INDUSTRY PERSPECTIVE FKMP,UTHM / GOOGLE MEET | 19/05/2020 |
2020 | BENGKEL SKT & KPI 2020 FKMP UTHM / - | 27/02/2020 - 29/02/2020 |
2020 | KULIAH DHUHA BULANAN MECH CLUB, FKMP UTHM / UTHM | 13/02/2020 |
2020 | PROGRAM TRANSFORMASI MINDA BIL 1/2020 PEJABAT PENDAFTAR,UTHM / ISMAH BEACH RESORT MELAKA | 02/02/2020 - 06/02/2020 |