Staff Profile

Full NameTs. Dr. AHMAD MUBARAK BIN TAJUL ARIFIN
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN MEKANIKAL
Email
Designation DS51 - PENSYARAH KANAN
  KETUA JABATAN
JABATAN LATIHAN & PEMBANGUNAN KERJAYA
INSTITUT PENYELIDIKAN PENDIDIKAN DAN LATIHAN VOKASIONAL MALAYSIA

Field of Expertise

Field Category (KPT) MATERIAL SCIENCES
Field (KPT) Polymeric Materials
Field of Specialization (KPT) Polymer Composites

Areas of Research Interest

1. Composite
2. Engineering Design
3. Integrated Product Development
4. Structural Analysis
5. Fatigue Failure
6. FEA-based Fatigue Analysis
7. Design & Technology in TVET

Academic Qualification

YearQualificationInstitution
2015 DOKTOR FALSAFAH KEJURUTERAAN MEKANIK DAN BAHAN UNIVERSITI KEBANGSAAN MALAYSIA
2010 SARJANA INOVASI DAN REKABENTUK KEJURUTERAAN UNIVERSITI PUTRA MALAYSIA
2007 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI MALAYSIA PERLIS
2003 DIPLOMA KEJURUTERAAN MEKANIKAL (LOJI) POLITEKNIK SEBERANG PERAI

Professional Appointments

DS51 - Pensyarah Kanan

Management Experience

DateDescription
01/11/2020 - 31/10/2022 Ketua Jabatan
Institut Penyelidikan Pendidikan dan Latihan Vokasional Malaysia, Jabatan Latihan & Pembangunan Kerjaya
01/01/2020 - 30/06/2021 Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Engineering Design Research Group (EDRG)
01/03/2020 - 28/02/2021 Penyelidik Utama
Institut Penyelidikan Pendidikan dan Latihan Vokasional Malaysia, Jabatan Penyelidikan, Inovasi & Konsultasi
01/01/2017 - 31/12/2018 Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)

Professional Societies

YearDescriptionRoleLevel
27/05/2011 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan
17/10/2011 - 31/12/2011 The Institution of Engineers, Malaysia (IEM)
Graduate Member Kebangsaan
15/05/2021 - 15/05/2022 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
16/05/2019 - 15/05/2020 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
16/05/2020 - 15/05/2021 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
01/05/2018 - 30/04/2019 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan

Teaching Experience

YearDescriptionLevel
2020 REKABENTUK KEJURUTERAAN BERSEPADU [BDA40804], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2020 REKA BENTUK PRODUK KIMPALAN [BBX10403], Session 20192020 Semester 2, FPTV, Universiti Tun Hussein Onn Malaysia. University
2019 MECHANICAL COMPONENT DESIGN [BDA31203], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2019 REKABENTUK KEJURUTERAAN BERSEPADU [BDA40804], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2019 REKABENTUK KEJURUTERAAN MEKANIKAL [BDA30803], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2019 REKABENTUK KEJURUTERAAN BERSEPADU [BDA40804], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia. University
2019 REKABENTUK KEJURUTERAAN [BDA40203], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia. University
2018 REKABENTUK KEJURUTERAAN BERSEPADU [BDA40804], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia. University
2018 REKABENTUK KEJURUTERAAN BERSEPADU [BDA40804], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2018 ENGINEERING COMPOSITE [MDB10103], Sarjana Mekanikal, Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2018 MECHANICAL COMPONENT DESIGN [BDA31203], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2017 MECHANICAL COMPONENT DESIGN [BDA31203], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2017 PENGATURCARAAN KOMPUTER [BDA24202], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia. University
2017 Product Lifecycle Management [MDC10903], Sarjana Mekanikal, Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia. University
2016 MDC 10100 Research Methodology, Master & PhD, Sesi 2016/2017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016. University
2016 PENGATURCARAAN KOMPUTER [BDA24202], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia. University
2016 BDA 31203 Rekabentuk Komponen Mekanikal, Sesi 2016/2017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016. University
2016 BDA 31203 Rekabentuk Komponen Mekanikal, Sesi 2016/2017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016. University
2016 MECHANICAL COMPONENT DESIGN [BDA31203], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia. University
2016 BDA 24202 Pengaturcaraan Komputer, Sesi 2016/2017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016. University
2016 BDA 24202 Pengaturcaraan Komputer, Sesi 2016/2017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016. University
2015 BDA 24202 Pengaturcaraan Komputer, Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015. University
2015 MDB 10103 Engineering Composite, Sarjana Mekanikal, Sesi 2015/2016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015. University
2015 BDA 31203 Rekabentuk Komponen Mekanikal, Sesi 2015/2016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015. University
2015 BDA 24202 Pengaturcaraan Komputer, Sesi 2015/2016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015. University
2015 CDC 10603 Engineering Composites, Sarjana Bahan, Sesi 2015/2016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015. University
2015 BDA 40804 Rekabentuk Kejuruteraan Bersepadu, Sesi 2015/2016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015. University
2014 BDA10703 CAD and Technical Drawing, Sesi 2014/2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014. University
2010 DDA 1822 Amalan Kejuruteraan Mekanikal, Sesi 2009/2010 Semester 3, Universiti Tun Hussein Onn Malaysia, 2010. University
2010 BDA 2052 CAD and Modelling, Sesi 2010/2011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010. University
2010 BDA 2052 CAD and Modelling, Sesi 2009/2010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010. University
2007 DDA 3023 Computer Aided Design, Sesi 2007/2008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007. University

Research Grants And Contracts

CodeTitleDesignationEnd Date
Q084 CONFIGURATION AND OPTIMIZATION OF CARBON FIBRE REINFORCED POLYMER AS A WRAPPING STRUCTURE ON PIPING SYSTEM Ketua 31/10/2024
H693 Numerical modelling to predict the effect of heat propagation into the tumour for hyperthermia therapy. Ahli 30/04/2023
Q069 Development of Instrument for Measuring Sustainable Student Mobility Index (SMoI) Ahli 31/01/2023
Q070 Developing a Representative Model of Collaboration Strategies for UTHM - KOPO International Cooperation Ahli 31/01/2023
K349 Transformation of TVET Educators to improve quality of TVET graduates for 4IR Ahli 31/12/2022
H643 Performance evaluation of different types of conductive Additive Manufacturing Electrode on machining Titanium Ahli 30/06/2022
H496 Program :Technology in Smart Recycling Projek :Formulation of Pneumatic Crusher Mechanism for Automated Waste Recycling Machine Ahli 31/12/2021
H660 Configuration and Optimization of Carbon Fibre Sandwich Panels for Wrapping Structures on Piping System. Ketua 31/12/2021
H675 Hemodynamic analysis on different stent strut configuration in femoropopliteal artery Ahli 31/12/2021
K058 Structural failure of stent due to severe hemodynamic impact on endothelail cell at ductus arterisous Ahli 30/12/2021
1631 Elucidating rheological and phase inversion mechanism of in-situ synthesis zinc oxide/polysulfone membrane Ahli 14/11/2021
H375 Fabrication of SOFC components via Screen Printing Technique for Metal-Supported Solid Oxide Fuel Cell (MS-SOFC) Ahli 30/06/2021
K136 Design, Build and Flight Test of A High Payload Cargo Drone System (C-Drone) Ahli 30/04/2021
H453 OPTIMIZATION OF MOTORCYCLE HELMET STRUCTURES USING DESIGN APPROACH AND FINITE ELEMENT METHOD Ketua 31/12/2020
1592 Failure Prevention of Stents due to Hemodynamic and Arterial Wall Interactions. Ahli 31/07/2019
U642 Development of Polycaprolactone (PCL) / Polylactic Acid (PLA) Composites for Fused Deposition Modelling (FDM) Ahli 31/12/2018
U834 Unmanned Aerial Vehicle (UAV) - Drone Photogrammetry For Digitization And 3D Modeling Of Flintstones Castle, Mersing Ketua 14/06/2018
A142 Cotton-Woolly Decompression Machine Ketua 01/04/2018
U356 Absorption of CO2 into Steelmaking Slag Using Low Energy Vibration Mill Ahli 31/08/2017
A087 Spiral Curry Puff Processing Machine Ahli 20/12/2016
B056 FISH SCALE REMOVER MACHINE Ahli 20/09/2016

Publications

Book Chapters
Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Ishkrizat Taib
(2020) Mechanical Analysis Evaluation Of Uhmwpe/ Hdpe Polymer Blends For Fused Deposition Modelling (Fdm) Feedstock Filament, Additive Manufacturing -Research And Development : Series 1, UTHM , 1, ISBN:9789672916376
Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Ishkrizat Taib
(2020) Thermal Analysis Of Pcl/Mmt/Ha Composites As An Alternative Feedstock Filament For Fdm, Additive Manufacturing - Research And Development : Series 2, UTHM , 1, ISBN:9789672916383
S.A.N.Mohamed, E.S.Zainudin, S.M.Sapuan, M.D.Azaman, A.M.T.Arifin
(2018) Introduction To Natural Fiber Reinforced Vinyl Ester And Vinyl Polymer Composites, Natural Fiber Reinforced Vinyl Ester And Vinyl Polymer Composites , 1st Edition, Woodhead Publishing , 1, ISBN:9780081021613
S.A.N.Mohamed, E.S.Zainudin, S.M.Sapuan, M.D.Azaman, A.M.T.Arifin
(2018) Optimization Method Of Injection Molding Parameters For Vinyl-Based Polymer Composites, Natural Fibre Reinforced Vinyl Ester And Vinyl Polymer Composites, Woodhead Publishing , 97, ISBN:9780081021613
General Publications
Zaman, I., Manshoor, B, Zainulabidin, M. H., Kamarudin, K. A., Didane, D. H., Nasir, N. F., Idris, A. F., Mohamad, Z., Ismail, A., Salleh, H., Mat Noor, F., Pauline, O., Azlan, M. A., Tajul Arifin, A. M., Subramaniyan, S. K., Ibrahim, M. N., M Amin, S. Y., Osman, S. A., Kamdi, Z., Sabudin, S., Latif, N. A., Ariffin, L. M.
(2021) Self Assessment Report 2021 Bachelor Of Mechanical Engineering With Honours, UTHM , 1, ISBN:-
Mohd Fahrul Hassan, Badrul Omar, Nik Hisyamudin Muhd Nor & Ahmad Mubarak Tajul Arifin
(2019) Integrated Engineering Design, UTHM , 1, ISBN:-
Journal
Salim N.A.N., Asmuin N., Hariri A., Sies M.F., Zakaria H., Idris A.F., Afandi A., Bosiran M.A., Taib I., Arifin A.M.T.
(2022) Experimental Investigation On Filtration And Cooling Effect Of Kitchen Hood Ventilation System From Water-Mist Recirculation Spray: Watermist Spray Cycle, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, PENERBIT AKADEMIA BARU , 2, 64, ISSN:22897879
Shaktivell M. Letchumanan, Ahmad Mubarak Tajul Arifin, Ishkrizat Taib, Mohammad Zulafif Rahim & Nor Adrian Nor Salim
(2021) Simulating The Optimization Of Carbon Fiber Reinforced Polymer As A Wrapping Structure On Piping System Using Solidworks, JOURNAL OF FAILURE ANALYSIS AND PREVENTION, SPRINGERNATURE, CAMPUS, 4 CRINAN ST, LONDON, ENGLAND, N1 9XW , 11, 2038, ISSN:15477029
Mun Kit Fong, Mohd Nasrull Abdol Rahman, Ahmad Mubarak Tajul Arifin, Reazul Haq Abdul Haq , Mohd Fahrul Hassan, Ishkrizat Taib
(2020) Characterization, Thermal And Biological Properties Of Pcl/Pla/Peg/N-Ha Composites, BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY, BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY , 4, 9017, ISSN:20695837
Sity Ainy Nor Mohamed, Edi Syams Zainudin, S.M. Sapuan, Mohd Azaman Md Deros and Ahmad Mubarak Tajul Arifin
(2020) Effects Of Different Stress Ratios On Fatigue Crack Growth Of Rice Husk Fibre-Reinforced Composite, BIORESOURCES, NORTH CAROLINA UNIVERSITY , 8, 6192, ISSN:19302126
Rino Andias, M.A. Haikal Ahmad, M. Zulafif Rahim, RHA Haq, A. M Sabri, N. Hafizah Aziz, Ahmad Mubarak Tajul Ariffin, Al Emran Ismail, Rasidi Ibrahim
(2020) The Influence Of Graphitization Catalyst Electrode In Electrical Discharge Machining Of Polycrystalline Diamond-Finishing Condition, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, PENERBIT UTHM , 2, 211, ISSN:2229838X
Paisal, M.S.A., Taib, I., Ismail, A.E., Arifin, A.M.T., Darlis, N.
(2019) An Analysis Of Blood Pressure Waveform Using Windkessel Model For Normotensive And Hypertensive Conditions In Carotid Artery, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Akademia Baru , 5, 69, ISSN:22897879
Fu Haw Ho, Abdul-Rashid Salwa Hanim , Raja Ghazilla Raja Ariffin , Mohd Nasrull Abdol Rahman , Mohd Fahrul Hassan , Ahmad Mubarak Tajul Arifin , Reazul Haq Abdul Haq , Said Ahmad , Haslina Abdullah
(2019) Analytical Analysis For Material Efficiency Practice: An Exploratory Study Of Malaysia Manufacturing Cases , JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing , 3, 1, ISSN:17426596
Al Emran Ismail, Kamarul Azhar Kamarudin, Mohd Khir Mohd Nor, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim and Mohammad Zulafif Rahim
(2019) Calculating Of Stress Intensity Factors Of Soldered Joints With Multiple Cracks, INDONESIAN JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCEMULTIPLE CRACKS, IAESCORE , 4, 284, ISSN:25024752
S.A.N.Mohamed, E.S.Zainudin, S.M.Sapuan, M.D.Azaman & A.M.T.Arifin
(2019) Energy Behavior Assessment Of Rice Husk Fibres Reinforced Polymer Composites, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, ELSEVIER, RADARWEG 29, AMSTERDAM, NETHERLANDS, 1043 NX , 11, 1, ISSN:22387854
Mohd Nasrull Abdol Rahman, S S Mohamad , O M F Marwah , I Masood , M F Hassan , A M T Arifin , R H A Haq , S Ahmad , H F Haw and H Abdullah
(2019) Inter- And Intra- Observer Reliability Of The Offera Method For Assessing Exposure Risk Of Computer Work-Related To Wmsds, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing Ltd , 3, 1, ISSN:17426588
Reazul Haq Abdul Haq, Ishkrizat Taib, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Said Ahmad, Ahmad Mubarak Tajul Ariffin, Mohd Fahrul Hassan
(2019) Mechanical Properties Of Pcl/Pla Composite Sample Produce From 3d Printer And Injection Molding, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 9, 102, ISSN:2229838X
Muhammad Sufyan Amir Paisal, Ishkrizat Taib, Al Emran Ismail, Ahmad Mubarak Tajul Arifin
(2019) Numerical Analysis On The Effect Of Normotensive And Hypertensive Physiological Conditions Onto Hemodynamic Characteristics In Stented Carotid Artery, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING IJMME-IJENS, IJENS , 3, 94, ISSN:22272771
Reazul Haq Abdul Haq
(2019) Thermal Properties Of Polycaprolactone (Pcl) Reinforced Montmorillonite (Mmt) And Hydroxyapatite (Ha) As An Alternate Of Fdm Composite Filament, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Akademia Baru , 10, 112, ISSN:22897879
Mohamed, S. A. N., Zainudin, E. S., Sapuan, S. M., Md. Deros, M. A., and Tajul Arifin, A. M.
(2018) Integration Of Taguchi-Grey Relational Analysis Technique In Parameter Process Optimization For Rice Husk Composite, BIORESOURCES, NORTH CAROLINA STATE UNIV DEPT WOOD & PAPER SCI CAMPUS , 12, 1110, ISSN:19302126
Asrizan Kaha, ishkrizat Taib, Muhammad Sufyan Amir Paisal, Ahmad Mubarak Tajul Arifin, Al Emran Ismail, Norzelawati Asmuin, Reazul Haq Abdul Haq, Surapong Chatpun, Takahisa Yamamoto, Kahar Osman
(2018) Lumped Parameter Modelling In Femoral Popliteal Artery For Normal And Severe Conditions, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE) , UTHM , 12, 193, ISSN:2229-838
Siti Nor Azila Khalid, Al Emran Ismail, Muhd. Hafeez Zainulabidin, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim & Mohammad Zulafif Rahim
(2018) Mechanical Performances Of Twill Kenaf Woven Fiber Reinforced Polyester Composites, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 49, ISSN:2229838X
Reazul Haq Abdul Haq, Omar Mohd Faizan Bin Marwah, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Said Ahmad, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Muhammad Zaini Yunos
(2018) Mechanical Properties Of Pcl/Pla/Peg Composite Blended With Different Molecular Weight (Mw) Of Peg For Fused Deposition Modelling (Fdm) Filament Wire, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE), UTHM , 11, 187, ISSN:2229838
Said Ahmad, Mohd Amri Lajis, Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Mohd Fahrul Hassan
(2018) Surface Roughness And Surface Topography Of Inconel 718 In Powder Mixed Dielectric Electrical Discharge Machining (Pmedm) , INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 181, ISSN:2229838X
Rahman, M.N.A., Hui, U.J., Haq, R.H.A., Hassan, M.F., Arifin, A.M.T., Yunos, M.Z., Adzila, S.
(2017) Assessment Of Repetitive Tasks Among Workers In Mould Making Manufacturing Industry, ADVANCED SCIENCE LETTERS, American Scientific Publishers , 5, 4405, ISSN:19366612
Muhammad Muslimin Husin, Mohammad Sukri Mustapa, Md Saidin Wahab, Tajul Arifin, Ahmad Mubarak, Reventheran AL Ganasan, Farhana Hazwanee Jais
(2017) Characteristics On Treated Kenaf Fiber Reinforced Polypropylene Composites, MATERIALS SCIENCE FORUM, Trans Tech Publications , 11, 94, ISSN:16629752
M.A. Haikal Ahmad, M. Zulafif Rahim, M. F. Mohd Fauzi, N. Hafizah Azis, A.E Ismail, Mohd Fahrul Hassan, A.M.T. Arifin, M.S. Yusof, and M. Rasidi Ibrahim
(2017) Electrical Discharge Machining Of Polycrystalline Diamond Using Copper Electrode - Finishing Condition, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 6, 012019-1, ISSN:1757899X
Mustapa, M.S., Wahab, M.S., Arifin, A.M.T., Masirin, M.I.M.
(2017) Flexural Properties Untreated And Treated Kenaf Fiber Reinforced Polypropylene Composites, AIP CONFERENCE PROCEEDINGS, American Institute of Physics Inc. , 5, 1, ISSN:0094243X
Mohd Fahrul Hassan, Mohamad Hafiz Mat Shah, Muhamad Zaini Yunos , Sharifah Adzila, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Reazul Haq Abdul Haq
(2016) Integration Of Ecqfd In Conceptual Design Activities For Enabling Environmentally Conscious Design, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 2489, ISSN:1819-6608
Mohd Fahrul Hassan, Mok Khiaw Keat, Muhamad Zaini Yunos, Sharifah Adzila, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Reazul Haq Abdul Haq
(2016) Investigation Of Existing Laptop Computer Towards Sustainable Development Using Design For Six Sigma And Design For Disassembly, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7683, ISSN:1819-6608
Adzila S., Kanasan N., Hassan M.F., Arifin A.M.T., Yunos M.Z., Rahman M.N.A., Haq R.H.A.
(2016) Synthesis And Characterization Of Magnesium Doped Calcium Phosphatefor Bone Implant Application, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 7, 8694, ISSN:18196608
A.M.T.Arifin
(2015) Behavioural Observation Of Laminated Polymer Composite Under Uniaxial Quasi-Static And Cyclic Loads , JOURNAL OF FIBERS AND POLYMERS, KOREAN FIBER SOC. (SPRINGER) , 3, 640, ISSN:18750052
A.M.T.Arifin
(2015) Effect Of Zinc Doped Calcium Phosphate Through Mechanochemical Synthesis, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 8, 6246, ISSN:1819-6608
A.M.T.Arifin
(2015) Musculoskeletal Discomfort Among Workers In Mould Making Manufacturing Industry, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 8, 6269, ISSN:1819-6608
Arifin, A.M.T.
(2014) Behaviour Of Chopped Strand Mat And Woven Roving Under Bending, MATERIALPRUEFUNG/MATERIALS TESTING, Carl Hanser Verlag GmbH & Co. KG , 11, 994, ISSN:00255300
A. M. T. Arifin, S. Abdullah, Md. Rafiquzzaman, R. Zulkifli, and D. A. Wahab
(2014) Failure Characterisation In Polymer Matrix Composite For Un-Notched And Notched (Open-Hole) Specimens Under Tension Condition, FIBERS AND POLYMERS, Korean Fiber Society , 8, 1729, ISSN:12299197
Arifin, A.M.T.
(2014) Fatigue Failures Of Differences Behaviour On Csm/Woven Roving Composite Materials, APPLIED MECHANICS AND MATERIALS, Scitec Publications Ltd. , 11, 335, ISSN:16609336
Arifin, A.M.T., Abdullah, S., Rafiquzzaman, M., Zulkifli, R., Wahab, D.A., Arifin, A.K.
(2014) Investigation Of The Behaviour Of A Chopped Strand Mat/Woven Roving/Foam-Klegecell Composite Lamination Structure During Charpy Testing, MATERIALS AND DESIGN, ELSEVIER SCI LTD , 7, 475, ISSN:0264-1275
Prosiding / Seminar
R. Aliyu, A. M. T. Arifin, R. H. A. Haq, M. F. Hassan, M. N. A. Rahman, A. E. Ismail, M. Z. Rahim, M. R. Ibrahim, M. A. Azlan, M. S. Ahmad, I. Taib & R. Ismail
(2019) An Integration Of Kano Model And Quality Function Deployment Technique - A Case Study Using Sport Earphone, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Arifin, A. M. T., Supri, A. G., Hassan, M. F., Rahman, M.N.A., Haq, R.H.A., Taib, I., Adzila, S.
(2019) Effect Of Filler Loading On Properties Of Polyurethane/Clay Composites , JOURNAL OF PHYSICS: CONFERENCE SERIES , 1, ISBN:17578981
Adrian Savari Thomas, Mohd Fahrul Hassan, Al Emran Ismail, Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Md Fauzi Ahmad
(2019) Portable Mini Turntable For Close-Range Photogrammetry: A Preliminary Study, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Amin, M. H. M., Arifin, A. M. T., Hassan, M. F., Haq, R. H. A., Rahman, M. N. A., Ismail, A. E., Rahim, M. Z., Ibrahim, M. R., Yunos, M. Z., Ismail, R.
(2017) An Evaluation Of Mechanical Properties On Kenaf Natural Fiber/Polyester Composite Structures As Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426596
MOHD FAHRUL HASSAN, SUHADA JUSOH, MUHAMAD ZAINI YUNOS, A M T ARIFIN, A E ISMAIL, M RASIDI IBRAHIM AND M ZULAFIF RAHIM
(2017) Application Of Design For Six Sigma Methodology On Portable Water Filter That Uses Membrane Filtration System: A Preliminary Study, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Reazul Haq Abdul Haq, Mohd Nasrull Abdol Rahman, Ahmad Mubarak Tajul Ariffin, Mohd Fahrul Hassan, Muhamad Zaini Yunos, Sharifah Adzila
(2017) Characterization And Mechanical Analysis Of Pcl/Pla Composites For Fdm Feedstock Filament, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
A.E Ismail, M.Q Abdul Rahman, M.Z Mohd Ghazali, M. Zulafif Rahim, M. Rasidi Ibrahim, Mohd Fahrul Hassan, Nik Hisyamudin Muhd Nor, A.M.T Ariffin, Muhamad Zaini Yunos
(2017) Combined Mode I Stress Intensity Factors Of Slanted Cracks, INSTITUTE OF PHYSICS PUBLISHING , 012011, ISBN:17578981
MOHD FAHRUL HASSAN, MOHD FAIZ AFHAM, AHMAD MUBARAK TAJUL ARIFIN, AL EMRAN ISMAIL, MOHD RASIDI IBRAHIM, MOHAMMAD ZULAFIF RAHIM, MD FAUZI AHMAD
(2017) Design And Development Of A Portable Metal Chip Baler Using A System Design Approach, EDP SCIENCES , 1, ISBN:2261236X
M. Rasidi Ibrahim, Fahrul Hasssan, Mubarak Ariffin,
(2017) Effect Of Feed Rate And Depth Of Cut On Cutting Forces And Surface Roughness When End Milling Of Mild Steel Using Noviano Cutting Tool, IEOM Society , 1777, ISBN: 9780985549763
A.M.T. Arifin, M. Fahrul Hassan, A.E. Ismail, M. Zulafif Rahim, M. Rasidi Ibrahim, R.H. Abdul Haq, M.N.A. Rahman, M.Z. Yunos, M.H.M. Amin
(2017) Investigation On Suitability Of Natural Fibre As Replacement Material For Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
HAQ R.H.A., KHAIRILHIJRA K.R., WAHAB M.S., SA'UDE N., IBRAHIM M., MARWAH O.M.F., YUSOF M.S., RAHMAN M.N.A., ARIFFIN A.M.T., HASSAN M.F., YUNOS M.Z., ADZILA S.
(2017) Pcl/Pla Polymer Composite Filament Fabrication Using Full Factorial Design (Doe) For Fused Deposition Modelling, INSTITUTE OF PHYSICS PUBLISHING , -, ISBN:17426596
Mohd Fahrul Hassan, M.R.A. Rahman , A.M.T. Arifin, A.E. Ismail, M. Rasidi Ibrahim, M. Zulafif Rahim, Md Fauzi Ahmad
(2017) Preliminary Study On Kano Model In The Conceptual Design Activities For Product Lifecycle Improvement, Institute of Physics Publishing , 1, ISBN:17578981
Mohamad Ikhwan Kori , Fara Lyana Jamalruhanordin, Ishkrizat Taib, Akmal Nizam Mohammed , Mohammad Kamil Abdullah , Ahmad Mubarak Tajul Ariffin, Kahar Osman
(2017) Wall Shear Stress Distributions On Stented Patent Ductus Arteriosus, AMERICAN INSTITUTE OF PHYSICS INC. , 5, ISBN:0094243X
ARIFIN, A.M.T., s. Abdullah, R. Zulkifli and D. A. Wahab
(2013) Investigating The Fatigue Phenomenon Of Csm-Woven Roving Composite Materials Lamination, IEEE , 110, ISBN:9781467357326
A.M.T.Arifin
(2011) Investigation On Composite Materials Characteristic Via Experimental And Design Processes, UMP

Consultancies

YearDescriptionLevel
2019 Facilitator, Workshop of Introduction to Solid Modelling using SolidWorks Software, UTHM. University
2019 FTK Research & Innovative Technology Competition, (RITEC'19), UTHM, Malaysia. National
2017 Juri bagi Program Innovator X anjuran Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM, Malaysia. University
2010 Consultancy Fasilitator for Train of Trainer (TOT), for Diploma and Certificate Program at IKBN Temerloh,Pahang. Government

Supervision

YearDescriptionRole
2020 Supervisor for Shaktivell A/L M. Letchumanan, Sarjana Mekanikal, UTHM, 2020. Supervisor
2020 Panel Penilai bagi Pertandingan MyRivet-iPRO anjuran MyRivet, Malaysia. Assessor
2020 Panel bagi Pembentangan Pre-VIVA-Aina Syazwana Zulkifle, Sarjana Kejuruteraan Mekanikal, FKMP, UTHM. Examiner
2020 Supervisor for Adnan Bin Musa, Sarjana Mekanikal, UTHM, 2020. Supervisor
2020 Supervisor for Fahmi Dinie Bin Mohammad, Sarjana Muda, UTHM, 2020. Supervisor
2019 Supervisor for Siti Nurhaniyyah Binti Zulkifli, Sarjana Mekanikal, UTHM, 2019. Supervisor
2019 Supervisor for Siti Syakirah Sholehah Binti Hazim, Sarjana Muda, UTHM, 2019. Supervisor
2019 Supervisor for Muhammad Arshil Azim Bin Mohd Yusof, Sarjana Muda, UTHM, 2019. Supervisor
2019 Panel bagi Pembentangan Disertasi I, Sarjana Sains Kejuruteraan Bahan (CDB), FKMP, UTHM. Examiner
2019 Panel Penilai Pertandingan Projek Rekabentuk Bersepadu MTUN IDP CUP, UTEM, Malaysia. External Assessor
2019 Panel Penilai bagi Karnival Kesukarelawanan dan Inovasi Pelajar, UTHM. Assessor
2019 Supervisor for Chong Han Jie, Sarjana Muda, UTHM, 2019. Supervisor
2019 Panel Penilai Moderasi, Projek Sarjana Muda II, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. Assessor
2019 Supervisor for Darren Duncan Alexander, Sarjana Muda, UTHM, 2019. Supervisor
2019 Panel Penilai Projek Sarjana Muda I dan II, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), FKMP, UTHM. Assessor
2019 Supervisor for Muhammad Naimuddin Aznan, Sarjana Muda, UTHM, 2019. Supervisor
2019 Panel Pembentangan Projek Sarjana I dan II, Sarjana Kejuruteraan Mekanikal, FKMP, UTHM. Examiner
2018 Supervisor for Mohammed Mahmmud Direa, Sarjana Mekanikal, UTHM, 2018. Supervisor
2018 Co-Supervisor for Muhammad Sufyan Amir Bin Paisal, Sarjana Mekanikal, UTHM, 2018. Supervisor
2018 Supervisor for Haetham Ghanim Abdulgalil Mohammed, Sarjana Mekanikal, UTHM, 2018. Supervisor
2018 Co-Supervisor for Fong Mun Kit, Sarjana Mekanikal, UTHM, 2018. Supervisor
2018 Supervisor for Mohamad Mawardi Bin Rustam, Sarjana Mekanikal, UTHM, 2018. Supervisor
2018 Supervisor for Mohamad Fadhil Bin Mohamad Yunus, Sarjana Mekanikal, 2018. Supervisor
2018 Supervisor for Muhammad Amirul Aiman Nawi, Sarjana Muda, UTHM, 2018 Supervisor
2018 Supervisor for Muhammad Taufiq Rohaizad, Sarjana Muda, UTHM, 2018. Supervisor
2018 Supervisor for Mohamad Shafiq Mohd Sarwan, Sarjana Muda, UTHM, 2018. Supervisor
2018 Supervisor for Muhd Nadzmi Jauhari, Sarjana Muda, UTHM, 2018. Supervisor
2018 Panel Pembentangan Projek Sarjana I dan II, Sarjana Kejuruteraan Mekanikal, FKMP, UTHM. Examiner
2018 Panel Penilai Moderasi, Projek Sarjana Muda II, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. Assessor
2018 Panel Penilai Projek Sarjana Muda I dan II, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), FKMP, UTHM. Assessor
2018 Panel Penilai Proposal, Projek Sarjana Muda I, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), FKMP, UTHM. Assessor
2018 Juri bagi Program Symposium on Integrated Engineering Desig (SIED'19), FKMP, UTHM. Assessor
2017 Panel Penilai Projek Sarjana Muda I dan II, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), FKMP, UTHM. Assessor
2017 Panel Penilai Tesis bagi Percalonan Pertandingan 'Tan Sri Ir Yusoff Best Final Year Project', anjuran Institut Jurutera Malaysia (IEM), 2017. Assessor
2017 Supervisor for Uzair Mustaghfirin Bin Azhar, Sarjana Muda, UTHM, 2017. Supervisor
2017 Supervisor for Siti Nurhaniyyah Binti Zulkifli, Sarjana Muda, UTHM, 2017. Supervisor
2017 Panel Pembentangan Projek Sarjana I dan II, Sarjana Kejuruteraan Mekanikal, FKMP, UTHM. Examiner
2017 Supervisor for Muhammad Nazerull Fitree Bin Mahad, Sarjana Muda, UTHM, 2017. Supervisor
2017 Supervisor for Aliyu Ruwaida, Sarjana Mekanikal, UTHM, 2017. Supervisor
2017 Supervisor for Nor Alif Bin Ahmad, Sarjana Muda, UTHM, 2017. Supervisor
2016 Panel Penilai Pembentangan MDC 10100 Metodologi Penyelidikan, Sesi 2016/2017, Semester 1, Universiti Tun Hussein Onn Malaysia. Assessor
2016 Supervisor for Mohd Nurshazwan Mohd Radzi, Sarjana Muda, UTHM, 2016. Supervisor
2016 Supervisor for Muhammad Lutfi Hasnan, Sarjana Bahan, UTHM, 2016. Supervisor
2016 Panel Penilai Pembentangan MDC 10100 Metodologi Penyelidikan, Sesi 2015/2016, Semester 2, Universiti Tun Hussein Onn Malaysia. Assessor
2016 Panel Penilai bagi Kolokium Pasca Siswazah Sarjana dan Doktor Falsafah MOd Penyelidikan, FKMP, UTHM. Assessor
2016 Panel Penilai Moderasi, Projek Sarjana Muda II, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. Assessor
2016 Panel Pembentangan Projek Sarjana I dan II, Sarjana Kejuruteraan Mekanikal, FKMP, UTHM. Examiner
2016 Penyelia Latihan Industri, FKMP, Semester 2 2015/2016, Universiti Tun Hussein Onn Malaysia. Supervisor
2016 Penyelia Latihan Industri, FKMP, Semester 3, 2015/2016, Universiti Tun Hussein Onn Malaysia. Supervisor
2016 Penilai Makalah bagi Regional Conference on Marine and Mechanical Engineering, Politeknik Ungku Omar, Malaysia. External Assessor
2016 Panel Penilai Projek Sarjana Muda I dan II, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), FKMP, UTHM. Assessor
2016 Panel Pembentangan, Metodologi Penyelidikan Pasca Siswazah, Sem 1 Sesi 2016/2017, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. Examiner
2015 Supervisor for Muhammad Hazmi Bin Mohd Amin, Sarjana Muda, UTHM, 2015. Supervisor
2015 Panel Penilai bagi Pembentangan Sarjana Kolokium 1 & 2 2015, FKMP, Universiti Tun Hussein Onn Malaysia. Assessor
2015 Panel Penilai bagi Pembentangan PhD Kolokium 1 & 2 2015, FKMP, Universiti Tun Hussein Onn Malaysia. Assessor
2015 Panel Penilai Pembentangan MDC 10100 Metodologi Penyelidikan, Sesi 2015/2016, Semester 1, Universiti Tun Hussein Onn Malaysia. Assessor
2015 Penilai Makalah bagi International Conference ReCar & NVC 2015 , Anjuran: Universiti Kebangsaan Malaysia), 2015. Assessor
2015 Panel Penilai bagi Projek Kejuruteraan Sarjana Muda 1 & 2, Sesi 2015/2016, Semester 1, Universiti Tun Hussien Onn Malaysia. Assessor
2015 Panel Penilai bagi Seminar on Integrated Engineering Design (SIED) 2015, Universiti Tun Hussein Onn Malaysia. Assessor
2015 Co-Supervisor for Muhammad Muslimin Mat Husin, Sarjana Mekanikal (Research), UTHM, 2015. Supervisor
2015 Supervisor for Saad Abdeen Hilali Osman, Sarjana Mekanikal, UTHM, 2015. Supervisor
2010 Panel Penilai bagi Projek Kejuruteraan Sarjana Muda, Sesi 2010/2011, Semester 1, Universiti Tun Hussein Onn Malaysia. Assessor
2007 Panel Penilai bagi Projek Kejuruteraan Diploma, Sesi 2007/2008, Semester 1,Universiti Tun Hussein Onn Malaysia. Assessor

Extension & Public Services

YearDescriptionLevel
2019 Penasihat Akademik, Pelajar Sarjana Muda Kejuruteraan Mekanikal (BDD), FKMP, UTHM. University
2019 Jawatankuasa Program Qaseh Ramadhan 2019, FKMP, Universiti Tun Hussein Onn Malaysia. University
2019 Jawatankuasa Pelaksana Program Tanggungjawab Khidmat Korporat, Jabatan Kejuruteraan Bahan & Rekabentuk, FKMP, Universiti Tun Hussein Onn Malaysia. University
2019 Timbalan Pengarah, Kelab Kebajikan dan Rekreasi FKMP (MechClub), 2019-2021. University
2019 Jawatankuasa Program Perkongsian Teknik Pengajaran Inovatif anjuran Engineering Design Research Group, FKMP, UTHM. University
2019 Jawatankuasa Pemeriksa, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2019 Jawatankuasa Kerja, Penganjuran Persidangan dan Ekspo Antarabangsa Ciptaan Institusi Pengajian Tinggi Awam 2019 (PECIPTA 2019), Malaysia. National
2019 Jawatankuasa TASK FORCE Program Sarjana Kejuruteraan Mekanikal, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2019 Ketua Program, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2019. University
2018 Jawatankuasa TASK FORCE Pemurnian Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2018 Ketua Program, Sarjana Muda Kejuruteraan Mekanikal dengan Kepujian (BDD), Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2018. University
2018 Chairperson, 9th International Conference on Mechanical and Manufacturing Engineering (ICME'18), Malaysia. International
2018 Jawatankuasa Program Qaseh Ramadhan 2018, FKMP, Universiti Tun Hussein Onn Malaysia. University
2018 Jawatankuasa Pelaksana Pelan Induk Pembangunan Kampus, Universiti Tun Hussein Onn Malaysia. University
2018 Secretary, 9th International Conference on Mechanical Engineering (ICME'2018), Malaysia. International
2017 Ketua Panel Jabatan, Jabatan Kejuruteraan Bahan Dan Rekabentuk, FKMP, UTHM. University
2017 Jawatankuasa Pemeriksa Fakulti, Fakulti Kejuruteran Mekanikal dan Pembuatan, UTHM, 2017-2018. University
2017 Jawatankuasa TASK FORCE Perancangan Pembangunan Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2017 Jawatankuasa, Colloquium on Structural Integrity FKMP (UTHM) & CAR (UKM), Universiti Tun Hussein Onn Malaysia. University
2016 Jawatankuasa Pelaksana, 7th International Conference on Mechanical Engineering (ICME'16), Malaysia. International
2016 Pembantu Pengerusi, Peperiksaan Lisan Sarjana Kejuruteraan Mekanikal (Penyelidikan) (VIVA), 2016. University
2016 Pegawai Pengiring Pelajar, Mobiliti Berkredit, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2016 Ketua Panel Akademik, Jabatan Kejuruteraan Bahan dan Rekabentuk, FKMP, UTHM. University
2016 Jawatankuasa Pengajaran, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2016 Jawatankuasa Pembelajaran, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2016 Penasihat Akademik, Pelajar Sarjana Muda Kejuruteraan Mekanikal (BDD), FKMP, UTHM. University
2016 Jawatankuasa Hubungan Antarabangsa, Fakulti Kejuruteraan Mekanikal dan Pembuatan, UTHM. University
2016 Jawatankuasa TASK FORCE Persediaan MQA-02, Sarjana Kejuruteraan Bahan, Fakulti Kejuruteraan Mekanikal dan Pembuatan, 2016. University
2016 Jawatankuasa Kecil, Majlis Konvokesyen ke-16, Universiti Tun Hussein Onn Malaysia, 2016. University
2016 Timbalan Pengarah, Program Qaseh Ramadhan FKMP 2016 University
2016 Scientific Committee for Regional Conference on Marine and Mechanical Engineering 2016 (REMME'16) International
2010 Penasihat Akademik, Pelajar Sarjana Muda Kejuruteran Mekanikal (BDD), FKMP, UTHM. University

Courses & Training

YearDescription
Organiser / Venue
Date
2022 BENGKEL SASARAN KERJA TAHUNAN (SKT) 2022 INSTITUT PENYELIDIKAN PENDIDIKAN DAN LATIHAN VOKASIONAL MALAYSIA (MYRIVET)
UTHM / MUDZAFFAR HOTEL MELAKA
24/03/2022 - 26/03/2022
2022 KOLOKIUM PENYELIDIKAN PASCA SISWAZAH SEMESTER 1 SESI 2021/2022
UTHM / ONLINE GOOGLE MEET
02/01/2022 - 04/01/2022
2021 MAJLIS SAMBUTAN MAULIDUR RASUL PERINGKAT UNIVERSITI TAHUN 1443H/2021M
PUSAT ISLAM, UTHM / MASJID UTHM
18/10/2021
2021 KURSUS PENYEDIAAN KERTAS KERJA DAN PENGURUSAN MESYUARAT/ PAPERWORK WRITING AND MEETING MANAGEMENT COURSE
PEJABAT PENDAFTAR,UTHM / ZOOM
06/09/2021 - 07/09/2021
2021 BENGKEL LATIHAN PANEL PENILAI APEL.A TAHAP 7
UTHM / DALAM TALIAN - GOOGLE MEET
14/06/2021
2021 TVET TALENT IN DIGITAL ERA
FPTV / Online Zoom
28/04/2021
2021 DATA ANALYSIS USING EXCEL & R
UTHM / (Virtual) Google Meet: meet.google.com/sng-qucu-fwi
24/03/2021
2021 SESI PERKONGSIAN SKIM PEMBANGUNAN POTENSI STAF
UTHM / Google Meet
21/03/2021
2021 TAKLIMAT OUTCOME-BASED EDUCATION: COMPLEX ENGINEERING PROBLEMS AND COMPLEX ENGINEERING ACTIVITIES
UTHM / -
17/03/2021
2021 MICRO-CREDENTIAL FOR TECHNICAL VOCATIONAL EDUCATION & TRAINING
UTHM / (Virtual) Google Meet:meet.google.com/crf-oyir-bcv
17/03/2021
2021 WEBINAR SUKAN UTHM 2021 SIRI 1/2021 : INSPIRASI KEJAYAAN BERSAMA TOKOH SUKAN NEGARA SHALIN ZULKIFLI
UTHM / SALURAN YOUTUBE UTHM
24/02/2021
2021 GOLD IN INNOVATION-JURY'S PERSPECTIVE-
UTHM / (Virtual) Google Meet:meet.google.com/eac-wotm-qqh
24/02/2021
2021 NON-DESTRUCTIVE TESTING (THINGS NEEDS TO KNOW)
UTHM / (Virtual) Google Meet: meet.google.com/vbw-gdti-zxz
10/02/2021
2021 PROGRAM BUAL BICARA MYFKMP 2.0: PROSES DAN SISTEM KENAIKAN PANGKAT STAF AKADEMIK UTHM 2022
FKMP,UTHM / ZOOM
27/01/2021
2021 FLOATING PHOTOVOLTAIC GENERATION: PROSPECT AND ENERGY ASSESSMENT IN MALAYSIA
UTHM / (Virtual) Google Meet: meet.google.com/bae-jcyb-odt
27/01/2021
2021 INSTRUCTIONAL DESIGN PRACTICE IN TEACHING AND LEARNING
FPTV / (Virtual) Google Meet:meet.google.com/ytm-wvbd-oib
20/01/2021
2021 REDI 2021: SHAPING RESILIENT TALENT
LAIN-LAIN / ATAS TALIAN
11/01/2021 - 12/01/2021
2021 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
PEJABAT PENDAFTAR,UTHM / GOOGLE MEET
05/01/2021
2020 PERKONGSIAN ILMU-TEKNIK PEMILIHAN BASIKAL KE ARAH KESIHATAN
FKMP,UTHM / Webinar- Zoom: https://uthm-edu-my.zoom.us/j/99202460482
03/12/2020
2020 TIPS DAN APLIKASI DAN PEMBANGUNAN SOALAN BERARAS TINGGI (OPEN-ENDED QUESTION)
UTHM / -
15/11/2020
2020 BICARA PROFESOR ULUNG : KEFAHAMAN BARU TENTANG PERPADUAN & PERANAN UNIVERSITI DALAM PERPADUAN NASIONAL
UTHM / -
12/11/2020
2020 BENGKEL UJILARI APLIKASI SISTEM OBE VERSI 4
PUSAT PEMBANGUNAN AKADEMIK, UTHM / BILIK PENCARIAN MAKLUMAT, PTTA
22/09/2020
2020 TAKLIMAT PENYEDIAAN MOOC-PLATFORM OPEN LEARNING
UTHM / -
13/08/2020
2020 MANAGING JOURNAL TOWARDS SCOPUS AND ISI INDEXING
UTHM / -
05/08/2020
2020 COVID19 - CRISIS MANAGEMENT ISSUES AND SOCIO-ECONOMIC IMPACT LESSON LEARNED FORM INDUSTRY PERSPECTIVE
FKMP,UTHM / GOOGLE MEET
19/05/2020
2020 UTHM GERMAN DAY 2020
UTHM / UTHM
19/02/2020
2020 BENGKEL ' INTERNATIONAL WORKSHOP ON 4TH INDUSTRIAL REVOLUTION AND TVET INNOVATION
UTHM / BILIK LESTARI 1, PTTA
12/02/2020 - 13/02/2020
2020 KURSUS TRANING OF TRAINER (TOT):PENAMBAHBAIKAN KUALITI BERTERUSAN (CQI) BAGI PROGRAM AKADEMIK
PUSAT PEMBANGUNAN AKADEMIK, UTHM / BILIK LATIHAN CAD
10/02/2020
2020 TAKLIMAT PEMURNIAN PROGRAM AKADEMIK PRA-SISWAZAH
UTHM / BILIK MESYUARAT EKSEKUTIF FKMP
02/02/2020

« Back