Staff Profile

Full NamePROF. MADYA DR MUSTAFFA BIN HJ IBRAHIM
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN PEMBUATAN DAN INDUSTRI (JKPI)
Email
Designation DS54 - PROFESOR MADYA

Field of Expertise

Field Category (KPT) ENGINEERING AND TECHNOLOGY
Field (KPT) Industrial and Manufacturing Engineering
Field of Specialization (KPT) Machining/Rapid Prototyping and Tooling (Including Standard Supporting Technologies of Precision Machining and Micro Machining)

Areas of Research Interest

1. Material Development for Rapid Prototyping Technology

Innovation Field of Interest

1. Portable Quranic Text Document Shred Incinerator

Academic Qualification

YearQualificationInstitution
2007 DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL KYUSHU INSTITUTE OF TECHNOLOGY
2000 SARJANA TEKNOLOGI PEMBUATAN INSTITUT TEKNOLOGI TUN HUSSEIN ONN
1999 DIPLOMA PERGURUAN INSTITUT TEKNOLOGI TUN HUSSEIN ONN
1997 SARJANA MUDA TEKNOLOGI PEMBUATAN INSTITUT TEKNOLOGI TUN HUSSEIN ONN

Professional Appointments

DS54 - Profesor Madya

Management Experience

YearDescription
2016 - 2017 Felo
Institut Ahli Sunnah Wal Jamaah
2017 - 2017 Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Kejuruteraan Mekanikal dan Pembuatan
2016 - 2016 Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Kejuruteraan Mekanikal dan Pembuatan
2014 - 2015 Timbalan Dekan (Penyelidikan, Pembangunan & Penerbitan)
Fakulti Kejuruteraan Mekanikal dan Pembuatan
2012 - 2014 Ketua Pusat
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Pembuatan Dan Bahan Termaju (AMMC)
2011 - 2011 Pengarah
Pejabat Antarabangsa
2009 - 2011 Pengarah
Pejabat Antarabangsa
2008 - 2009 Pengetua Kolej Kediaman
Pejabat Hal Ehwal Pelajar, Unit Perumahan - Kolej Kediaman Tun Dr. Ismail
2008 - 2008 Ketua Pusat
Pusat Pembangunan Dan Pengembangan Pelajar, Bahagian Pentadbiran Dan Kewangan
2007 - 2008 Ketua Pusat
Pusat Pembangunan Dan Pengembangan Pelajar, Bahagian Pentadbiran Dan Kewangan

Teaching Experience

YearDescriptionLevel
2009 Computer Integrated Manufacturing (MKM 1204), Sem.2, 2009/2010, UTHM University
2009 Rapid Manufacturing BDD 4043, Sem.2, 2008/2009, UTHM University
2009 Rapid Manufacturing BDD 4043, Sem.1, 2009/2010, UTHM University
2008 Rapid Manufacturing BDD 4043, Sem.1, 2008/2009, UTHM University
2008 Rapid Manufacturing BDD 4043, Sem.2, 2008/2009, UTHM University
2008 Rapid Product Development & Manufacturing (MDM1232), Sem.2, 2008/2009, UTHM University
2007 Manufacturing System BKM4583, Sem.2, 2007/2008, UTHM University
2007 Rapid Manufacturing BDD 4043, Sem.2, 2007/2008, UTHM University
2007 Prototaip Deras / DDD3623,Sem.1, 2007/2008, UTHM University

Research Grants And Contracts

CodeTitleDesignationEnd Date
U872 Development of Conformal Cooling in Rapid Tooling by Selective Laser Melting (SLM) Process Ahli 31/08/2019
A114 Mobile Food Cart Mampu Milik Ketua 31/12/2018
U691 Parameter optimization for CO2 laser cutting of medium density fiberboard (MDF) Ketua 15/04/2018
U750 The post-processing effects of A1SiMg parts produced by selective laser melting (SLM) on its mechanical,physical and microstructures Ketua 31/03/2018
U834 Unmanned Aerial Vehicle (UAV) - Drone Photogrammetry For Digitization And 3D Modeling Of Flintstones Castle, Mersing Ahli 14/12/2017
1494 Direct write of conductive track on textile materials under several testing conditions for wearable electronics application Ahli 30/11/2017
B070 Desktop Filament Extruder and Spooler Ahli 31/05/2017
U357 The Impact of Injection Molding Processing Conditions and Fiber Content Towards The Properties of Polypropylene-Nanoclay Nanocomposites Blend With Gigantochloa Scortechinii Fibers Ahli 31/05/2017
U478 Life-Cycle Analysis of 3D Printing Compare to Traditional Machining Manufacturing Ketua 28/02/2017
1511 Feasibility investigation of waste derived hydroxpatite/Uhmwpe composite for biomedical applications Ahli 26/01/2017
U546 Low Cost Mobile Food Cart Ketua 31/12/2016
1426 The Relationship of The Chip Size with Oxide Precipitation on The Mechanical and Physical Properties of The Recycled Aluminum Alloy (AA6061) in Hot Press Forging Ahli 30/11/2016
U287 Customized Foot orthosis Insolf Fabricated With 3D Printing Technology (Hospital Rehabiliti Cheras) Ketua 31/07/2016
U183 Design An Additive Manufacture For Ankle-Foot Orthotics (AFO) using rapid-prototyping Ketua 31/03/2016
U050 Fused Deposition Modeling Using Polymer Matrix Composite Material Ketua 31/10/2015
1329 Feasibility Study on DLP Projector As An Energy Light Source to Cure Silver Conductive Ink Track Ahli 01/05/2015
1057 Characterization of Droplet based Rapid Prototyping for Direct Tooling Ahli 14/04/2015
B018 PORTABLE QUR'ANIC VERSES DOCUMENT SHRED-INCINERATOR Ketua 01/09/2014
1126 Preparation And Characterisation Of Porous Paperclay Ceramic Body For The Porpose Of Membrane Support Ahli 31/08/2014
0551 Investigation of the Physical Changes or Irridiated Polystyrene Nanospheres Exposed to Electron Beam Ahli 31/10/2011
0696 The development of an optional binder for palm oil based fly ash via three dimensional printing Ketua 31/07/2010
0543 Development of a pattern direct write system (micro drop dispenser) using piezoelectric drop generation Ketua 30/06/2009
U087 Direct Metal Laser Sintering Process Of Plastic Injection Moulding Tools Ahli 31/05/2017
E018 Exploration Of Biofoam From Renewable Resources Ahli 30/11/2016
1423 Collapsibility Behaviour of Rapid Prototyping Materials use as Direct Sacrificial Patterns in Investment Casting Process for Tooling Cost Reduction Ahli 31/08/2016
B034 Set Praktikal Haji Mudahalih Ahli 08/05/2015
C056 Advanced Manufacturing And Material Center (AMMC), UTHM Ahli 28/02/2015
C016 Tajuk Program : Sustainable Integrated Direct Recycling Of Aluminium Industrial Waste Tajuk Projek : Hot Press Forging And Hot Extrusion For Direct Recycling Chip Aluminium Ahli 31/12/2014
0950 A Numerical and Experimental Study In RP Multi-Jet Modeling Internal Pattern Structure For Investment Casting Ketua 31/08/2013
0695 Study of using three dimensional printer for EDM electrode fabrication) Ketua 28/02/2011
0366 The Development of an Optional Material for Rapid Prototyping using Pulverized Biomass Fly Ash Ketua 30/11/2009

Publications

Book
Khairul Azman, Hussain Othman, Mustaffa Ibrahim
(2012) Tun Dr. Ismail: Merintis Kepimpinan Berintegriti, UTHM , 1, ISBN:978-967-0468-23-5
Journal
O.M.F. Marwah, M. Ibrahim, E.J. Mohamad, M. A. Johar , M. H. Othman
(2017) Quality Parts Of Portable Fdm Machine Used In Direct Investment Casting, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), Engg Journals Publications , 1, 2638, ISSN:2319-8613
O. M. F. Marwah1, N. F. A. Halim1, M. S. Shukri1, E. J.Mohamad2 and M. Ibrahim
(2016) A Study On Palm Fiber Reinforces As A Filament In Portable Fdm, JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7828, ISSN:18196608
Shukri M.S., Marwah O.M.F., Ibrahim M., Sharif S., Mohamad E.J.
(2016) An Experimental Analysis Of Strain And Stress For Abs Pattern Developed By Portable Fdm Machine Used In Direct Investment Casting, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6501, ISSN:18196608
Marwah O.M.F., Sharif S., Ibrahim M., Mohamad E.J., Idris M.H.
(2016) Direct Rapid Prototyping Evaluation On Multijet And Fused Deposition Modeling Patterns For Investment Casting, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART L: JOURNAL OF MATERIALS: DESIGN AND APPLICATIONS, IMeche , 958, ISSN:14644207
N. Sa'ude, M. Ibrahim and M. H. I. Ibrahim
(2016) Document Melt Flow Rate (Mfr) Of Abs-Copper Composite Filament By Fused Deposition Modeling (Fdm), ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN Journal of Engineering and Applied Sciences , 5, 6562, ISSN:18196608
Mohd Shahir Yahya, Musli Mohammad, Mustaffa Ibrahim, Ghazali Kadis, Abd Khalil Abd Rahim
(2016) The Effectiveness Of Portable Training Set For Hajj Course (P.A.H.A.M) Toward Increasing The Pilgrims Understanding: A Survey, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 9, 11150, ISSN:1819-6608
M. Ibrahim, N. M. A. Isa, N. Sa?ude and M. I. Ibrahim
(2016) Verification Of Feed Rate Effects On Filament Extrusion For Freeform Fabrication, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 5, 6556, ISSN:1819-6608
Rd Khairilhijra Khirotdin, Adham Mohamad Nasir, Khairu Kamarudin and Mustaffa Ibrahim
(2015) Investigation Of Dlp Projector As An Energy Light Source To Cure Silver Conductive Ink, APPLIED MECHANICS & MATERIALS, Trans Tech Publications Ltd , 7, 13, ISSN:1660-9336
Marwah, O.M.F., Sharif, S., Zainol, M.A., Ibrahim, M., Mohamed, E.J.
(2014) 3d Printer Patterns Evaluation For Direct Investment Casting, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 10, 1400, ISSN:16609336
Khairu K., M . Ibrahim, S. Hassan, H. Hehsan, Ashari Kasmin
(2014) Study On Layer Fabrication For 3d Structure Of Photoreactive Polymer Using Dlp Projector, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 1, 911, ISSN:16609336
Marwah, O.M.F., Sharif, S., Zainol, M.A., Ibrahim, M., Idris, M.H.
(2013) Collapsibility Studies Of Mjm Acrylate Patterns For Investment Casting, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 5, 839, ISSN:16609336
Omar M.F.M, S. Sharif, M.Ibrahim., MH. Idris., A.S.A. Fadzil, A.M Amin
(2013) Differential Ceramic Shell Thickness Evaluation For Direct Rapid Investment Casting, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 4, 418, ISSN:16628985
M.N. Hafsa, M. Ibrahim, S. Sharif, M.F.M Omar, M.A. Zainol
(2013) Evaluation Of Different Internal Structure And Build Orientation For Multijet Modeling Process, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 4, 587, ISSN:16628985
M.N. Hafsa, M. Ibrahim, S. Sharif, M.F.M Omar, S. Sulaiman
(2013) Finite Element Analysis On Rapid Prototyping Pattern With Different Internal Structure For Investment Casting, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND APPLICATIONS, International Journal of Engineering Research and Applications , 8, 1934, ISSN:22489622
Marwah, O.M.F., Sharif, S., Ibrahim, M.
(2012) Direct Fabrication Of Ic Patterns Via Rapid Prototyping Approaches, INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY, FUJI TECHNOLOGY PRESS , 9, 570, ISSN:18817629
Omar M.F.M, S. Sharif, M.Ibrahim., H.Hehsan.,M.N.M Busari, Hafsa .MN
(2012) Evaluation Of Direct Rapid Prototyping Pattern For Investment Casting, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 2, 226, ISSN:1662-8985
Prosiding / Seminar
Mohd Shahir Yahya, Abd Khalil Abd Rahim, Musli Mohammad, Mustaffa Ibrahim, Ghazali Kadis
(2017) Evaluation On The Perception Of The New Portable Set For Hajj Course (P.A.H.A.M) Based On Design Characteristics, IOP Publishing , 1, ISBN:1757899X
Mustaffa Bin Hj Ibrahim
(2011) Freeform Fabrication Of Titanium Based Powder By Inkjet 3d Printer, -
Mustaffa Bin Hj Ibrahim
(2011) Parameter Study On Small Droplet Generation Using Drop On Demand Piezoelectric Inkjet Technology, -
Mustaffa Bin Hj Ibrahim
(2011) Quality Assessment Of Indirect Rapid Prototyping Pattern Produced By Silicone Mould , -
Mustaffa Bin Hj Ibrahim
(2009) Fabrication Of Mmc Material For Edm Electrode
Mustaffa Bin Hj Ibrahim
(2008) Development Of Alternative Material For Three Dimensional Printer
Mustaffa Bin Hj Ibrahim
(2008) Palm Oil Based Flyash For Freeform Fabrication Of Prototypes Using 3d Printer
Mustaffa Bin Hj Ibrahim
(2006) A Study On Inkjet Drop Deposition To Fabricate Multi-Material 3d Structure
Mustaffa Bin Hj Ibrahim
(2006) A Study On Using Inkjet Printing Technology To Fabricate Three-Dimensional Structures
Mustaffa Bin Hj Ibrahim
(2006) Investigation On Fabricating 3d Structures Using Inkjet Printing Technology
Mustaffa Bin Hj Ibrahim
(2005) A Study On Fluid Deposition Resolution In Inkjet Printing Of Multi Material Fluid For Rapid Prototyping Application
Mustaffa Bin Hj Ibrahim
(2005) A Study On The Effect Of Operating Parameters On A Single Nozzle Piezoelectric Inkjet Device
Mustaffa Bin Hj Ibrahim
(2005) Deposition Of High Aspect Ratio Silver Conductive Ink For Stereolithigraphy Sff Fabrication
Mustaffa Bin Hj Ibrahim
(2005) Inkjet Printing Resolution Study For Multi-Material Rapid Prototyping
Mustaffa Bin Hj Ibrahim
(2004) Electronic Circuit Fabrication Using Inkjet Printed Of Silver Nanoparticles For Sff
Mustaffa Bin Hj Ibrahim
(2004) Integration Of Silver Nanoparticle Inkjet Printing And Layered Manufacturing Technology
Mustaffa Bin Hj Ibrahim
(2003) A Study On Direct Writing Of Conductive Ink Using Ink Jet Printing Technology

Supervision

YearDescriptionRole
2012 Supervisor to Mohd Amirullah Bin Zainol , UTHM, 2012 Supervisor
2012 Supervisor to Roslinda Binti Sufarman , UTHM, 2012 Supervisor
2012 Supervisor to Suhaimi Bin Sulaiman , UTHM, 2012 Supervisor
2012 Supervisor to Muhammad Idzuan Bin Ibrahim Sabki , UTHM, 2012 Supervisor
2012 Supervisor to Muhammad Idzuan Bin Ibrahim Sabki , UTHM, 2012 Supervisor
2012 Supervisor to Mohamad Azhar Bin Azahari , UTHM, 2012 Supervisor
2012 Supervisor to Nuraini Binti Mhd Noor , UTHM, 2012 Supervisor
2012 Supervisor to Nurul Emi Nor Ain Binti Mohammad , UTHM, 2012 Supervisor
2012 Supervisor to Liana Nabila Binti Mohd Shah , UTHM, 2012 Supervisor
2011 Supervisor to Md Fahme Bin Ahmad, UTHM, 2011 Supervisor
2011 Supervisor to Hafsa Binti Mohammad Noor, UTHM, 2011 Supervisor
2011 Supervisor to Mohd Afiq Bin Jantan, UTHM, 2011 Supervisor
2011 Supervisor to Mohamad Faiz Bin Jalil, UTHM, 2011 Supervisor
2011 Supervisor to Norsyafiq Bin Mohamed Busari, UTHM, 2011 Supervisor
2010 Supervisor to Nadiah Binti Ahmad Shukeri, UTHM, 2010 Supervisor
2010 Supervisor to Nor Shakirah bt. Saidin, UTHM, 2010 Supervisor
2010 Supervisor to Soffuan Mohamed, UTHM, 2010 Supervisor
2010 Supervisor to Mohamed Faizal b. Zainol, UTHM, 2010 Supervisor
2010 Supervisor to Nor Aqilah Binti Mohamed, UTHM, 2010 Supervisor
2010 Supervisor to Mohd. Afiq Akram b. Yusof, UTHM, 2010 Supervisor
2010 Supervisor to Norhidayah bt. Mohd. Zain, Masters, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2009 Supervisor to Noor Azamiah Binti Abdul Razak, UTHM, 2009 Supervisor
2009 Supervisor to Mohd Nizam Bin Adanan, UTHM, 2009 Supervisor
2009 Supervisor to Mohammad Taridi Bin Abdullah, UTHM, 2009 Supervisor
2009 Supervisor to Dzulkarnain B. Dimyati, UTHM, 2009 Supervisor
2009 Supervisor to SITI Amalina Bt Mohd Ramli, UTHM, 2009 Supervisor
2008 Supervisor to Syed Sakdudin b. Syed Ali, UTHM, 2008 Supervisor
2008 Supervisor to Norazlin bt. Nasir, UTHM, 2008 Supervisor
2008 Supervisor to Mohd. Nor Kharizan Sariff, UTHM, 2008 Supervisor

« Back