Staff Profile
| Full Name | Prof. Madya Engr. Dr Abdul Mutalib Bin Leman |
|---|---|
| Faculty | Fakulti Teknologi Kejuruteraan |
| Department | Jabatan Teknologi Kejuruteraan Mekanikal |
| Staff Number | 01039 |
| Designation | DS54 - Profesor Madya |
|
Ketua Program Jabatan Teknologi Kejuruteraan Mekanikal Fakulti Teknologi Kejuruteraan | |
|
Ketua Kumpulan Fokus (FG) Safety and Health Fakulti Teknologi Kejuruteraan |
Areas of Research Interest
| 1. | Occupational Safety and Health |
| 2. | Indoor Air Quality and Ventilation |
| 3. | Energy- Bio fuel |
Innovation Field of Interest
| 1. | Safety alert system |
| 2. | Work Environment |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2011 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | UNIVERSITI TEKNOLOGI MARA |
| 2004 | SARJANA PERANCANGAN DAN RESPON KECEMASAN | UNIVERSITI PUTRA MALAYSIA |
| 2003 | SARJANA PENDIDIKAN VOKASIONAL | KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN |
| 2002 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITI TEKNOLOGI MALAYSIA |
| 1997 | CERTIFICATE/SIJIL KEJURUTERAAN MEKANIKAL | POLITEKNIK UNGKU OMAR |
Professional Appointments
| DS54 - Profesor Madya |
Management Experience
| Year | Description |
|---|---|
| 2016 - 2021 | Ketua Kumpulan Fokus (FG)
Fakulti Teknologi Kejuruteraan, Safety and Health |
| 2015 - 2017 | Ketua Program
Fakulti Teknologi Kejuruteraan, Jabatan Teknologi Kejuruteraan Mekanikal |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| Malaysian Tribology Society (MYTRIBOS)
| Member | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2015 | Kejuteraan Perpaipan (BNL30403),Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia,2015(20pelajar) | University |
| 2015 | Kecekapan Tenaga Loji (BNL40303),Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia,2015(Seksyen 2:13 pelajar) | University |
| 2015 | (MFA11100)Research Methodology, Sem 1, 2015/2016. Universiti Tun Hussein Onn Malaysia. | University |
| 2015 | Kecekapan Tenaga Loji(BNL40303),Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia,2015 | University |
| 2015 | Kecekapan Tenaga Loji (BNL40303),Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia,2015(Seksyen 1:13 pelajar) | University |
| 2015 | Kecekapan Tenaga Loji (BNL40303),Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia,2015(Seksyen 4:13 pelajar) | University |
| 2015 | Proses Kejuteraan keselamtan(BNL40403),Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia,2015 | University |
| 2015 | Kejuteraan Perpaipan (BNL30403),Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia,2015(19 pelajar) | University |
| 2015 | Kecekapan Tenaga Loji (BNL40303),Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia,2015(Seksyen 3:13 pelajar) | University |
| 2014 | (MFA11100) Research Methodology, Sem 1, 2014/2015. Universiti Tun Hussein Onn Malaysia, master | University |
| 2014 | (MFA11100) Research Methodology, Sem 2, 2013/2014. Universiti Tun Hussein Onn Malaysia,(master) | University |
| 2014 | (CGR 10803) Railway Operation and Maintenance, Sem 2, 2013/2014. Universiti Tun Hussein Onn Malaysia(master) | University |
| 2014 | Keselamatan dan kesihatan pekerjaan(BNJ21102),Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia,2014(seksyen1) | University |
| 2014 | (CGR 10803) , Railway Operation and Maintenance, Sem 2, 2012/2013. Universiti Tun Hussein Onn Malaysia (2 Students)(master) | University |
| 2014 | Rekabentuk Kejuteraan Loji(BNJ20203),Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia,2014 | University |
| 2014 | (CGR 10803)Railway Operation and Maintenance, Sem 2, 2014/2015. Universiti Tun Hussein Onn Malaysia | University |
| 2014 | (CGR 10403) Rolling Stock and Traction Systems Sem 1, 2014/2015. Universiti Tun Hussein Onn Malaysia. | University |
| 2014 | Keselamatan dan kesihatan pekerjaan(BNJ21102),Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia,2014(seksyen2) | University |
| 2013 | (SMHH 5103), Industrial Hygiene. Sem Mei 2013, Open Universiti Malaysia (3 Students)(master) | University |
| 2013 | Rolling Stock And Traction Systems(CGR10403),Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia,2013 | University |
| 2013 | Railway Operation And Maintenance(CGR10803),Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia,2013 | University |
| 2013 | Keselamatan dan kesihatan pekerjaan(BNJ21102),Sesi 20132014 Semester 2, Universiti Tun Hussein Onn (seksyen2) | University |
| 2013 | Mekanik Pepejal (BNJ10403),Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia,2013(seksyen5) | University |
| 2013 | Mekanik Pepejal (BNJ10403),Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia,2013(seksyen7) | University |
| 2013 | Keselamatan dan kesihatan pekerjaan(BNJ21102),Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia,2013(seksyen3) | University |
| 2013 | Rolling Stock And Traction System (CGR10403),Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia,2013 | University |
| 2012 | Tatik(BNK10203),Sesi 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia,2012 | University |
| 2012 | Kreativiti dan Inovasi(BNJ10302) , Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia,2012 | University |
| 2012 | Prinsip Pengurusan dan Etika(BNJ20602),Sesi 20122013 Semester 3, Universiti Tun Hussein Onn Malaysia,2012(seksyen3) | University |
| 2012 | Prinsip Pengurusan dan Etika(BNJ20602),Sesi 20122013 Semester 3, Universiti Tun Hussein Onn Malaysia,2012(seksyen4) | University |
| 2012 | (SMHH 5013) , Industrial Hygiene. Sem Sept 2012, Open Universiti Malaysia ( 11 Students)(master) | University |
| 2012 | Prinsip Pengurusan dan Etika(BNJ20602),Sesi 20122013 Semester 3, Universiti Tun Hussein Onn Malaysia,2012(seksyen7) | University |
| 2012 | (SMRK 5103) Risk Management. Sem Mei 2012, Open Universiti Malaysia ( 11 Students) Safety and Health(master) | University |
| 2012 | (CGR 10403), Rolling Stock and Traction Systems Sem 1, 2012/2103. Universiti Tun Hussein Onn Malaysia (2 students)(master) | University |
| 2012 | Prinsip Pengurusan dan Etika(BNJ20602),Sesi 20122013 Semester 3, Universiti Tun Hussein Onn Malaysia,2012(seksyen 5) | University |
| 2011 | Occupational Safety and Helath,[MTV 1503]. Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | IAQ FOR ASESSOR COURSE( BUILDING SCIENCE, VENTILATION, AIR CONDITIONING-ACMV)- NIOSH | National |
| 2011 | USM - Kursus :Kualiti Udara Dalaman: Faktor dan Impak Kepada Kesihatan. (8 Ogos 2011) Kampus Kesihatan, Universiti Sains Malaysia, Kubang Kerian, Kelantan | University |
| 2011 | Maintenece and Safety Engineering [BDE 4073], Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2011 | Kejuteraan Pengenggaraan dan Keselamatan , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011(seksyen 9) | University |
| 2011 | Themal Environment Design(MDT10704) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011 | University |
| 2011 | Rekabentuk Berbantukan Komputer dan Pembuatan(BDD4023) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011 | University |
| 2011 | Makmal Kejuteraan V(BDA37001), Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011 | University |
| 2011 | Makmal Kejuteraan IV(BDA27201) , Sesi 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia,2011 | University |
| 2011 | Kejuteraan Pengenggaraan dan Keselamatan , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011(seksyen 10) | University |
| 2011 | Kejuteraan Pengenggaraan dan Keselamatan(BDE4073) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011(seksyen 8) | University |
| 2011 | Pengurusan dan Penjimatan Tenaga(BDE4023) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011(seksyen 8) | University |
| 2011 | Pengurusan dan Penjimatan Tenaga(BDE4023) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011(seksyen9) | University |
| 2011 | Pengurusan dan Penjimatan Tenaga(BDE4023) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011(seksyen 10) | University |
| 2011 | Termodinamik II(BDA30403) , Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia,2011 | University |
| 2011 | SHO Course: Ventilation, NIOSH , Johor Bharu, Malaysia | Government |
| 2011 | Kursus Chemical Health Risk Assessment (CHRA), Julai 2011, NIOSH, Bangi, Malaysia | Government |
| 2011 | Occupational Safety and Health : Risk Management, EDOSH, OUM, Kuching | Private |
| 2011 | Occupational Safety and Health Risk Management (EDOSH) Open University Malaysia,Kuching, Sarawak, 2011 | Private |
| 2011 | Chemical Health Risk Analysis Course (NIOSH), 7-8 April 2011 | National |
| 2011 | CHRA COURSES (VENTILATION, CHEMICAL EXPOSURE, PUSH-PULL SYSTEM)-NIOSH | National |
| 2011 | Energy Saving and Management [BDE 4023], 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 | University |
| 2010 | Advance Fluid Mechanic (EDMV 3103), Sesi May 2010, Open University Malaysia, 2010 | University |
| 2010 | Building Safety and Health System-INSPEN -Bangi (14 October 2010) | National |
| 2010 | Indoor Air Quality for Asessor Course (NIOSH), 2010 | National |
| 2010 | Safety and Health Management System (DAS 4081), INSEP 2010, UTHM, Brderless Resources Sdn. Bhd., 2010 | Private |
| 2009 | Fluid Power Technology ( KBP 2010), Sesi 20082009 Semester 2, Universiti Teknology MARA, 2009 | University |
| 2009 | DDS1051)Final Project, Semester 1 2009/2010, Universiti Tun Hussein Onn Malaysia (4 students)(diploma) | University |
| 2009 | (DDS1041)- Project Management, Semester 1 2009/2010, Universiti Tun Hussein Onn Malaysia (19 students)(diploma) | University |
| 2009 | Indoor Air Quality for Assessor Course, (NIOSH), 2010 | National |
| 2009 | Preventive Maintenece Course, MARA (Safety and HealthModule), MARA, 2009 | Government |
| 2009 | Safety and Health Course (INSEP 2009) (ERP Module) UTHM. Borderless Resources Sdn. Bhd. 2009 | Private |
| 2009 | (DDZ1021) Safety and Health, Semester 1 2009/2010, Universiti Tun Hussein Onn Malaysia (19 students) | University |
| 2008 | Pemilihan Bahan (KJP 406), Sesi 20072008 Semester 1, Universiti Teknologi MARA (UiTM), 2008 | University |
| 2008 | (DDZ1021)- Safety and Health, Semester 1 2008/2009, Universiti Tun Hussein Onn Malaysia (20 students)(diploma) | University |
| 2008 | (KJP 276)- Teknologi Kuasa Bendalir, Semester II 2008/2009, Universiti Teknologi Mara, Shah Alam. (4 students) | University |
| 2008 | Indoor Air Quality for Assessor Course, (NIOSH), 2009 | National |
| 2008 | (DDS1041)- Project Management, Semester 1 2008/2009, Universiti Tun Hussein Onn Malaysia (20 students)(diploma) | University |
| 2008 | Indoor Air Quality for Assessor Course, (NIOSH), 2009 | National |
| 2008 | (DDS1051)- Final Project, Semester 1 2008/2009, Universiti Tun Hussein Onn Malaysia (4 students)(diploma) | University |
| 2007 | Termodinamik 2 (BDA 3043), Sesi 20072008 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Makmal Kejuruteraan V (BDA 3701), Sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Termodinamik 2 (BDA 3043), Sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Makmal Kejuruteraan V (BDA 3701), Sesi 20072008 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 | University |
| 2007 | Teknologi Kuasa Bendalir (KJM 276), Sesi 20072008 Semester 2, Universiti Teknologi MARA (UiTM), 2007 | University |
| 2007 | (KJM 276)-Teknologi Kuasa Bendalir. Semester I 2007/2008, Universiti Teknologi Mara, Shah Alam. (30 students)(diploma) | University |
| 2007 | (DDS1051)- Final Project, Semester 1 2007/2008, Universiti Tun Hussein Onn Malaysia (8 students)(diploma) | University |
| 2007 | (DDS1041)- Project Management, Semester 1 2007/2008, Universiti Tun Hussein Onn Malaysia (20 students)(diploma) | University |
| 2007 | (DDZ1021)- Safety and Health, Semester 1 2007/2008, Universiti Tun Hussein Onn Malaysia (20 students)(diploma) | University |
| 2007 | Indoor Air Quality for Assessor Course, (NIOSH), 2007 | National |
| 2006 | Kejuruteraan Loji (KJP 376), Sesi 20062007 Semester 1, Universiti Teknologi MARA (UiTM), 2006 | University |
| 2006 | Keselamatan Bengke, Sesi September 2006 Open University Malaysia, 2006 | Private |
| 2006 | Kaedah pengajaran dan pembelajaran dalam T&V (EBHV 3203), Sesi September 2006 Open University Malaysia, 2006 | Private |
| 2006 | Production Technology (EBMP 3103/EDMP 3103), Sesi May2006 Open University Malaysia, 2006 | Private |
| 2006 | (KJP 376)-Plant Engineering. Semester I 2006/2007, Universiti Tun Hussein Onn Malaysia (12 students)(diploma) | University |
| 2006 | Termodinamik 2 (BDA 3043), Sesi 20062007 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2006 | University |
| 2006 | Kejuruteraan Pengeluaran (KJP 276), Sesi 20062007 Semester 1, Universiti Teknologi MARA (UiTM), 2006 | University |
| 2005 | Makmal Kej. Mekanikal 2 (BKM 3141), Sesi 200520056 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2005 | University |
| 2005 | Kej. Keselamatan (BKM 4333), Sesi 20052006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2005 | University |
| 2005 | Termodinamik 2 (BDA 3403), Sesi 20052006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 | University |
| 2005 | Kej. Keselamatan (BKM 4062), Sesi 200520056 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2005 | University |
| 2005 | (MMT 1052)-Safety and Health in Industry. Semester I 2005/2006, Universiti Tun Hussein Onn Malaysia / Kimberly Clark (20 students)(diploma) | University |
| 2005 | Projek Sarjana Muda 1 (BKM 3902), Sesi 200520056 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2005 | University |
| 2004 | Projek Sarjana Muda 2 (BTM 3904), Sesi 20042005 Semester 1, Kolej Univerisit Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Mekanik Mesin (DTM 2153), Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Kej. Penyamanan Udara dan penyejukan (BKM 5063/BMM 4603), Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Keselamatan dan Kesihatan Pekerjaan (DDA 2032), Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Projek Sarjana Muda 2 (BTM 3904), Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Pemindahan Haba (BTM 3103), Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Keselamatan dan Kesihatan Pekerjaan (DKM 2032), Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Perkakasan Mesin (BTM 3323), Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Projek Sarjana Muda 1(BTM 3902), Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Projek Sarjana Muda 1 (BTM 3092), Sesi 20042005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | (DDA 2032)-Occupational Safety and Health. Semester I 2004/2005, Universiti Tun Hussein Onn Malaysia (20 students)(diploma0 | University |
| 2004 | (DTM2153)-Mechanic of Machine. Semester I 2004/2005, Universiti Tun Hussein Onn Malaysia (12 students)(diploma) | University |
| 2004 | (DTM 3103) ?Heat Transfer. Semester II 2004/2005, Universiti Tun Hussein Onn Malaysia (60 students)(diploma) | University |
| 2004 | (DKM 2032)- Keselamatan dan Kesihatan Pekerjaan. Semester II 2004/2005, Universiti Tun Hussein Onn Malaysia (4 students)(diploma) | University |
| 2004 | Amalan Kejureteraan Mekanikal 3 (BTM 2801), Sesi 20042005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn, 2004 | University |
| 2004 | Safety and Health in Industry (MMT1052), Sesi 20042005 Semester 2, Diploma (kimberly-Clark) 2004 | Private |
| 2003 | (DTM2153)-Machine of Machine, Sem I, 2003/2004. KUiTTHO Malaysia (50 students).(diploma) | University |
| 2003 | (ENG 207)-Group Final Project, Sem II 2003/2004, Sijil Teknologi Industri (STI), Universiti Tun Hussein Onn Malaysia / Kimberly Clark (4 students)(certificate) | University |
| 2003 | (ENG 209)- Safety and Health, Sem II 2003/2004, Sijil Teknologi Industri (STI), Universiti Tun Hussein Onn Malaysia / Kimberly Clark (40 students)(certificate) | University |
| 2003 | (DTJ 3023)-Skill IV, Semester I 2003/2004, KUiTTHO (45 students)(diploma) | University |
| 2003 | Safety and health (ENG 209)- Sijil Teknologi Industri (STI)- Kimberly Clark, 2003 | Private |
| 2003 | Teaching Method in Tecnical and Vocational Education (EBHV 3203), Semester September 2003, Open University Malaysia | Private |
| 2003 | Kemahiran Teknologi Mekanika -PPU (BTT 3814) Sesi 20032004 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), 2003 | University |
| 2003 | Project (ENG 209), Sijil Teknologi Industri (STI), Kimberly-Clark 2003 | University |
| 2003 | Projek Sarjana Muda 1 (BTM 3902) Sesi 20032004 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), 2003 | University |
| 2003 | Kemahiran 4 (DTJ 3202), Sesi 20032004 Semester 1. Kolej Universiti Teknologi Tun Hussein Onn, 2003 | University |
| 2003 | Mekanik Mesin (DTM 2153) Sesi 20032004 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), 2003 | University |
| 2003 | Makmal Kejuruteraan 3 (BTM 2711) Sesi 20032004 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), 2003 | University |
| 2003 | Projek Sarjana Muda 2 (BTM 3904) Sesi 20032004 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO), 2003 | University |
Research Grants And Contracts
Publications
| Journal |
|---|
| Mohd Mahathir Suhaimi, A. M. Leman and Haryati Safii (2017) Indoor Plants As Agents Deterioration Of Gas Pollutions, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, 2006-2016 Asian Research Publishing Network (ARPN). , 1, 10944, ISSN:1819-6608 |
| Rumaizah Ruslan ,Ishak Baba , Abdul Mutalib Leman and Tan Lai Wai (2016) A Framework Of Non-Fatal Occupational Injury Surveillance In Palm Oil Mill- A Proposed Study, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 6, 7322, ISSN:18196608 |
| Rumaizah Ruslan, Ishak Baba, Abdul Mutalib Leman and Tan Lai Wai (2016) A Framework Of Non-Fatal Occupational Injury Surveillance In Palm Oil Mill-A Proposed Study, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7322, ISSN:18196608 |
| A.M. Leman (2016) Coordination Of Inter-Agency In Flood Catastrophic Event- Proposed Study, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publising Network(ARPN) , 7, 8726, ISSN:18196608 |
| S. N. Mohd Dzulkifli; A. H. Abdullah and A. M. Leman (2016) Design And Material In Museum: Does It Affect The Ventilation In Indoor Air Quality?, JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7341, ISSN:1819-6608 |
| A.M. Leman (2016) Design And Material In Museum:Does It Affect The Ventilation In Indoor Air Quality ?, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publising Network(ARPN) , 6, 7341, ISSN:18196608 |
| A.M. Leman (2016) Development Of Inter Agency Information System For Flood Catasthrophic Preparedness In Malaysia, ASIAN RESEARCH PUBLISING NETWORK(ARPN), Asian Research Publising Network(ARPN) , 7, 8733, ISSN:18196608 |
| Abdul Mutalib Leman, K.A. Rahman, M.N.M. Salleh, Ishak Baba, L.S.C. Johnson, Dafit Feriyanto, Siti Nur Hidayah Muhamad, Siti Nur Hidayah Kassim (2016) Development Of Inter Agency Information System For Flood Catastrophic Preparedness In Malaysia, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asean Research Publishing Network (ARPN) , 7, 8733, ISSN:18196608 |
| S. Zakaria, A. M. Leman, D. Feriyanto, A. Hariri and A. A. Nazri (2016) Indoor Air Quality (Iaq) Monitoring In Academic Management Centre, JOURNAL OF OCCUPATIONAL SAFETY AND HEALTH, National Institute of Occupational Safety and Health (NIOSH) Ministry of Human Resources Malaysia , 6, 33, ISSN:1675-5456 |
| A.M. Leman (2016) Progresses Of Filtration For Removing Particles And Gases Pollutants Of Indoor: Limitations And Future Direction:Review Article, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network(ARPN) , 5, 3633, ISSN:18196608 |
| Norshuhaila Mohamed Sunar, Quin anak Emparan, Paran anak Gani, Abdul Mutalib Leman (2016) Survival Of Pseudomonas Putida As Bioremediation Agent In Soil Contaminated With Biodiesel-Diesel Mixture (B50) Blends, JOURNAL OF ENGINEERING AND APPLIED SCIENCES , ARPN Journal of Engineering and Applied Sciences , 6, 7280, ISSN:1819-6608 |
| Chin Ming Er, Norshuhaila Mohamed Sunar, Abdul Mutalib Leman, Norzila Othman, Umi Kalthsom, Nurul Azreen Jamal, Nur Athirah Ideris (2016) The Biocidal Effect Of Potassium Sorbate For Indoor Airborne Fungi Remediatrion, DESALINATION AND WATER TREATMENT, taylor & francis , 1, 1, ISSN:1944-3986 |
| Umi Kalthsom Parjo, Norshuhaila Mohamed Sunar, Abdul Mutalib Leman, Chin Ming Er, Paran Gani (2015) Effect Of Fungal Growth On The Surface Of Painted Plasterboards, ADVANCES IN ENVIRONMENTAL BIOLOGY, American-Eurasian Network for Scientific Information (AENSI Publisher) , 9, 15, ISSN:1995-0756 |
| Amir Khalid, Norrizal Mustaffa, B. Manshoor, Hanis Zakaria, Ahmad Jais Alimin, Mutalib Leman, A. Sadikin (2013) The Comparison Of Preheat Fuel Characteristics Of Biodiesel And Straight Vegetable Oil, APPLIED MECHANICS & MATERIALS, Trans Tech Publications , 12, 161, ISSN:16627482 |
| Abdul Mutalib Bin Leman (2010) Environmental Quality Index (EQI) for Industrial Ventilation and Occupational Safety and Health Evaluation in Manufacturing Plant, Asean Journal on Quality, - , Vol: 11, 168-164, ISSN:235455 |
| Abdul Mutalib Bin Leman (2010) Indoor Air Quality Issues for Non-Industrial Workplace, International Journal of Research and Reviews in Applied Sciences, - , Vol: 15, 20-25, ISSN: 2076 734 |
| Abdul Mutalib Bin Leman (2010) Injury and Occupational Diseases Report : Malaysia Current Scenario, Asian-Pacific Occupational Health and Safety, - , Vol: 17, 15-18, ISSN:1237 0843 |
| Abdul Mutalib Bin Leman (2010) MONITORING OF WELDING WORK ENVIRONMENT IN SMALL AND MEDIUM INDUSTRIES (SMIs), International Journal on Research and review in Appliad science, - , Vol: 15, 200-208, ISSN:2076 734 |
| Abdul Mutalib Bin Leman (2010) Occupational Safety and Health Training Program: Malaysian Perspective, Asian-Pacific Occupational Health and Safety, - , Vol: 17, 12-13, ISSN:1237 0843 |
| Abdul Mutalib Bin Leman (2010) The development of an industrial air pollution monitoring system for safety and health enhancement and a sustainable work environment using QFD approach, Asean Journal on Quality, - , Vol: 11, 152-168, ISSN:2764656 |
| Abdul Mutalib Bin Leman (2010) Welding Technnology- South East Asia (Malaysia), Australasian Welding Journal, - , Vol: 7, 24-27, ISSN:234678 |
| Abdul Mutalib Bin Leman (2005) Indoor Air Quality of Longhouses In Sarawak, International Journal of Indoor Environment and Health, - , Vol: 15, 6, 172, ISSN:09056947 |
| Abdul Mutalib Bin Leman (2005) Indoor Air quality of Public Toilets in Malacca, International Journal of Indoor Environment and Health , - , Vol: 15, 6, 6, ISSN:09056947 |
| Abdul Mutalib Bin Leman (2005) Simulation of Comfort and Indoor Air Quality Level for Terrace House, International Journal of Indoor Environment and Health , - , Vol: 15, 6, 156, ISSN:09056947 |
| Prosiding / Seminar |
| Supaat Zakaria, A.M. Leman, Dafit Faryanto, Azmarini A. Nazri, N.M. sunar, Mohd Najib Mohd Salleh (2016) A Burner Characteristics For Activated Carbon Production , EDP Sciences , 1 , ISBN:1961-9502 |
| S.N. Marina Mior, A.M. Leman, M.R. Baharudin, R. Masripan, M. Faazir T. and M. Ifwat A. (2016) A Preliminary Study Of Knowlegde, Attitude And Practices Of Pesticide Use Among Oil Palm Workers In Johor, Unimap , ISBN:2261236X |
| A.M. Leman, J. Afiqah, Fakhrurrazi Rahman, Dafit Feriyanto, Supa'at Zakaria and R. Rahmad (2016) Catalytic Converter Developed By Washcoat Of Y-Alumina On Nickel Oxide (Nio) Catalyst In Fecral Substrate For Exhaust Emission Control : A Review, Unimap , ISBN:2261236X |
| K.A Rahman, A.M Leman , M.Z.M Yusof and M.M.N Salleh (2016) Consumer Awareness In Energy Efficiency For Residential Houses In Peninsular Malaysia , Unimap , ISBN:2261236X |
| Mohd Mahathir Suhaimi, A.M Leman, Azizi Afandi, Azian Hariri, Ahmad Fu?ad Idris, S.N. Mohd Dzulkifli, Paran Gani (2016) Effectiveness Of Indoor Plant To Reduce Carbon Dioxide In Indoor Environment , EDP Sciences , - , ISBN:2261-236X |
| A.M. Leman , K.A. Rahman , M.N.M. Salleh , I. Baba , Dafit Feriyanto (2016) Emergency Response Plan :Simulation Of Cordinate Of Inter-Agency In Catastrophic Event, Univertiti Teknologi Malaysia , ISBN:1819-6608 |
| K.A Rahman, A.M Leman, M. Faris Mubin, M.Z.M Yusof, Azian Hariri, and M.N.M Salleh (2016) Energy Consumption Analysis Based On Energy Efficiency Approach: A Case Of Suburban Area, EDP Sciences , 1, ISBN:2261-236X |
| Hadi pranoto, A.M Leman, Darwin Sebayang and D. Feriyanto (2016) Improvement On Transportation Safety On Bus By Installing A Speed Limiter In Conventional Engine To Reduce Speed Rate , Unimap , ISBN:2261236X |
| A.M Leman, Dafit Feriyanto, N. Farhana, R. Rahmat, B.A. Bakar and I. Baba (2016) Oxidation Resistance Analysis Of Metallic(Fecral Foil) Catalytic Converter Developed By Ultrasonic Approach, Unimap , ISBN:2261236X |
| Mohd Mahathir Suhaimi Shamsuri , a A.M. Leman , Azin Hariri , K.A Rahman , M.Z.M Yusof , and Azizi Afandi (2016) Profiling Of Indoor Plant To Deteriorate Carbon Dioxide Using Low Light Intensity, EDP Sciences , 1 , ISBN:2261-236X |
| Mohd Mahathir Suhaimi Shamsuri, A.M.Leman, Azian Hariri, K.A Rahman, M.Z.M Yusof and Azizi Afandi (2016) Profiling Of Indoor To Deteriorate Carbon Dioxide Using Low Light Intensity, Unimap , ISBN:2261236X |
| A.M Leman, Fakhrurrazi Rahman, Afiqah Jajuli, Winardi Sani, Supa'at Zakaria and Dafit Feriyanto (2016) Simulation On Toxic Gases In Vehicle Exhaust Equipped With Modified Catalytic Converter : A Review, Unimap , ISBN:2261236X |
| U K Parjo , N M Sunar, A M Leman, P Gani, Z Embong, S A A Tajudin (2016) The Aspergillus Niger Growth On The Treated Concrete Substrate Using Variable Antifungals , IOP Publishing , 1 , ISBN:1757-899X |
| Roslizan Masripan, A.M Leman, I. Baba, Dafit Ferianto, Supaat Zakaria, Fakhrurrazi Rahman (2016) The Development Of Plant Maintenance Scheduling Via Inventory System For Sustainable Plant Operation, Unimap , ISBN:2261236X |
| Abdul Mutalib Bin Leman (2011) Experimental Study on Effect of Air Flow Rate on Ventilation Effectiveness in Lecture Room, - |
| Abdul Mutalib Bin Leman (2010) Remanufacturability Study Using Risk Analysis, - |
| Abdul Mutalib Bin Leman (2010) THE INDUSTRIAL AIR POLLUTION MONITORING ACTIVITIES IN SMALL AND MEDIUM INDUSTRIES DUE TO SAFETY AND HEALTH REQUIREMENTS AND SUSTAINABILITY WORK ENVIRONMENT, - |
| Abdul Mutalib Bin Leman (2010) The Development and implementation of Industrial Indoor Air Quality Monitoring System for safety and Health Enhancement in Small and Medium Industries(SMIs) in Malaysia, - |
| Abdul Mutalib Bin Leman (2010) The Development of Industrial Air Pollution Monitoring System Using Quality Function Deployment (QFD) Approach for Malaysian Small and Medium Industries, - |
| Abdul Mutalib Bin Leman (2010) University-Industry-Training Center Likkages Towards Sustainable Development "Challanges for future", - |
| Abdul Mutalib Bin Leman (2009) Air Pattern in weding activities in small and medium industries due to ventilation requirements, - |
| Abdul Mutalib Bin Leman (2009) Integrated Indoor Air Quality monitoring and simulation for working environment, - |
| Abdul Mutalib Bin Leman (2009) Monitoring of Toxic Gases Exposure in Welding Process of Small and Medium Industries, - |
| Abdul Mutalib Bin Leman (2009) The Development of Brake Pad Testing Appartus for Teaching and Learning Application, - |
| Abdul Mutalib Bin Leman (2008) Environmental Quality Index (EQI) for Engineering Laboratory , - |
| Abdul Mutalib Bin Leman (2008) Indoor Environment Quality and outdoor Air effect to Sustainable Work Environment, - |
| Abdul Mutalib Bin Leman (2008) Study of thermal Comfort and Productivity in Office Environment, - |
| Abdul Mutalib Bin Leman (2008) The Effect of Indoor Air Quality in Office Spaces By Using Mechanical Ventilation and Connected With The Industrial Building, - |
| Abdul Mutalib Bin Leman (2008) The development of indoor air pollution monitoring system(IAPMOS) towards sustainable work environment, - |
| Abdul Mutalib Bin Leman (2007) Environmental Index for University Engineering Laboratory, - |
| Abdul Mutalib Bin Leman (2007) Indoor Air Quality of New Laboratory Buildings Towards Sustainable Development, - |
| Abdul Mutalib Bin Leman (2007) The Development of Indoor Air Pollution Monitoring System (IAPMOS) Towards Sustainable Work Environment in Smaal and medium Industries in Malaysia, - |
| Abdul Mutalib Bin Leman (2006) Carbon Dioxide Concentration Analysis Inside Lecture Room, - |
| Abdul Mutalib Bin Leman (2006) Monitoring Of Indoor Air Quality for Safety and Health Factor Improvement towards Sustainable Work Environment in Industry, - |
| Abdul Mutalib Bin Leman (2006) Performance and Cost Analysis of Double Flow Solar Air Heaters , - |
| Abdul Mutalib Bin Leman (2006) Simulation of Indoor Air Quality at Basement Carparks , - |
| Abdul Mutalib Bin Leman (2006) The Development of Walk-in Stability Chamber for Modeling and Simulation , - |
| Abdul Mutalib Bin Leman (2006) The Effectiveness of Under floor Air Distribution (UFAD) System in Controlling Thermal Comfort and Indoor Air Quality, - |
| Abdul Mutalib Bin Leman (2006) Toxic Gases Monitoring in Industrial Environment, - |
| Abdul Mutalib Bin Leman (2005) A Measure of The Learning Organization: KUiTTHOs Experience, - |
| Abdul Mutalib Bin Leman (2005) Indoor Air Quality (IAQ) at Basement Car Park Premises, - |
| Abdul Mutalib Bin Leman (2005) Indoor Air Quality of Longhouses In Sarawak, - |
| Abdul Mutalib Bin Leman (2005) Indoor Air Quality of Public Toilets in Malacca, - |
| Abdul Mutalib Bin Leman (2005) Simulation of Comfort and Indoor Air Quality Level for Terrace House, - |
| Abdul Mutalib Bin Leman (2005) Technology Assessment in Palm Oil Industry in Johor, - |
| Abdul Mutalib Bin Leman (2005) The Design of Alert System for Front Brake Pad Non-Contact for National Car , - |
| Abdul Mutalib Bin Leman (2005) The Development of Laboratory True to the Machining Technology, - |
| Abdul Mutalib Bin Leman (2005) The Effectiveness of Underfloor Air Distribution (UFAD) System In Controlling Thermal Comfort And Indoor Air Quality, - |
| Abdul Mutalib Bin Leman (2005) Thermal Comfort and Freshness in Office Buildings , - |
| Abdul Mutalib Bin Leman (2005) Thermal Comfort at Workplace: UPM Case Study, - |
| Abdul Mutalib Bin Leman (2005) Thermal Comfort in Office Building, - |
| Abdul Mutalib Bin Leman (2005) Ventilation Needs in Office Building, - |
| Abdul Mutalib Bin Leman (2004) Controlling Indoor Air Temperature and Air Movement using Convection Ventilator, - |
| Abdul Mutalib Bin Leman (2004) Safety and Health in Industrial Environment, - |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2015 | Consultative panel for Isokinetik Stack and Air Emission Monitoring (for Boiler),Sincerely Dyeing & Finishing Sdn Bhd. 2 July 2013 | National |
| 2015 | Consultative Panel for Trainer/Assessor for City & Guilds IVQ Level 3 Advanced Diploma for Oil & Gas Operation Courses. 10 September 2015. | International |
| 2015 | Consultative Panel for Technical Advisor, Think Plus Consulting Sdn Bhd, 1 July 2015- 31 July 2017 | National |
| 2013 | Consultative Panel for OSH Course ,KKTM Sri Gading, Batu Pahat 14-15 May 2013 | National |
| 2013 | Consultatiive Panel for IAQ Data Collection, NIOSH, Mac 2013 | National |
| 2013 | Consultative Panel for IAQ Data Collection, NIOSH, 27-28 June 2013 | National |
| 2013 | Consultative Panel for Heat Stress Monitoring, ERA Lab Sdn Bhd, Feb- May 2013 | National |
| 2012 | Consultative Panel for IAQ Data Collection, ERA Lab Sdn Bhd , 2012-2013 | National |
| 2011 | Consultatiive Panel for Formaldehyde measurement, NIOSH, Mac 2011 IAQ | National |
| 2011 | Consultatiive Panel for GREEN PASS | National |
| 2011 | Demostrate and Data Collection Method (Fomaldemeter and smoke tube)-IAQ measurement | Private |
| 2011 | Consultatiive Panel for IAQ Measurement, NIOSH, 27-29 Oct 2011 | National |
| 2011 | Consultatiive Panel for Consultant for KKTM Staff, Batch 2, Core Technical Course | National |
| 2010 | Equipment Rental and Consultancies- NIOSH(23-24 December 2010) | National |
| 2010 | Penyewaan Alat dan Khidmat Pakar, NIOSH, 2010 | Government |
| 2010 | Penyewaa Alat dan khidmat pakar (IAQ monitoring), ERA Lab Consultant, 2010 | Private |
| 2010 | Penyewaan Alat dan Khidmat pakar ( Light intensity- lux meter), ERA Lab Consultant, 2010 | Private |
| 2010 | Consultatiive Panel for Indoor Air Quality Measurement, ERA Lab Sdn Bhd, Disember 2010 | National |
| 2010 | Equipment Rental and Consultancies- Era Lab Sdn.Bhd. (Disember 2010) | Private |
| 2009 | Consultant for Preventive Maintenence & Operation, MARA, 2009 | Government |
| 2009 | Consultatiive Panel for Indoor Air Quality Measurement, ERA Lab Sdn.Bhd, June 2009 | National |
| 2009 | Dust Monitoring (Dust Trax), ERA LabConsultant, 2010 | Private |
| 2007 | Consultatiive Panel for Curriculum development, SINARBEKAL /K-UTECH, (Project for IKBN Temerloh) April 2007 (3 years) | National |
| 2007 | Consultant for Curriculum Developemnt, IKBN Temerloh, Pahang, Ministry of Youth and Sport, 2007-2010 | Government |
| 2006 | Consultatiive Panel for Indoor Air Quality In Exxonmobil Building, Jasa Bumi Air Conditioning, Mac 2006 | National |
| 2006 | Consultatiive Panel for VOC in Exxonmobil Building, Jasa Bumi Air Conditioning, April 2006 | National |
| 2005 | Consultative Panel for IAQ and Energy in Buildings,KUKTM, Melaka,October 2005 | National |
| 2005 | Consultative Panel for Safety Engineering, Kah Hwa Industries Sdn.Bhd., September 2005 | National |
| 2005 | Consultative Panel for Fuel Oil & Thermo oil Laboratory Test, Kah Hwa Industries Sdn. Bhd, 2005 | National |
| 2005 | Consultative Panel for Indoor Air Quality, ExxonMobil Building, Kuala Lumpur, Jun 2005 | National |
| 2005 | Consultative Panel for Indoor Air Quality and Energy in Buildings,KUKTM, Melaka,November 2005 | National |
Supervision
| Year | Description | Role |
|---|---|---|
| 2016 | Supervisor for Chan Yuen Hwa , Development of vacuum cleaner with pH meter , Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Farah Zamnah Bt Zainal Bong , Production of Biofertilizer using watse foods , Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Theepa A/P Gunusegaran ,Generate Bioethanol from Empty Fruit Bunch Of Oil Palm Using Catalyst at Different Concentration of acid ,Universiti Tun Hussein Onn ,2016 (Final year project,degree ) | Supervisor |
| 2016 | Supervisor for Syafiqah Fakhriah bt. Mohd Shukri , The design and fabrication of the Bio-digester by using goat and cattle manure, Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Roswady Bin Abdul Wahab ,Development of Animal Feed Process Machine for Medium-scale Farm Towards Sustainable Food Security (PHD) | Supervisor |
| 2016 | Supervisor for Muhammad Elias Muiz Bin Ahmad Shaffie , Development of Injector in combustion chamber of micro gas turbine, Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Muhammad Afifi Bin Muhammad Sidik , Bio-fertilizer (disposal of minisipal solid waste to organic fertlizer )Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | External Examiner for Syafiq Bin Suhaimi ,Master , Universiti Malaysia Pahang,27 may 2016 | External Examiner |
| 2016 | Examiner for Sakinah Binti Mohamad Zawahid (2016): Fabrication Of Carbon Brush Oil Palm Shell for Railway Application | Examiner |
| 2016 | External Examinar for Kamisah Abdul Hamid. Experimental Investigation on Forced Convection Heat Transfer Of Water and Ethylene Glycol (60:40) Based Tio2 Nanofluid. Sarjana Kejuruteraan (Mekanikal). Universiti Malasyia Pahang. 21 Januari 2016. | External Examiner |
| 2016 | Supervisor for Muhammad Syafiq Anam Bin Yaakub , The improvement if indoor air quality in electric and electronic based industry, Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Latesh Kumar A/L Veerasolan , The design of fornace for activated carbon production , Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Examiner for Thesis : Tengku muhammad Fahmi Bin Tengku Ibrhim(2016):Design of Heat Exchanger for Portable Solar Powered Water Distiller Using Computational Fluid Dynamics | Examiner |
| 2016 | Supervisor for Chong Haw Jie, Energe efficiency System Develpoment , Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Jayprasanth A/L Krishnan , Design power generaton using speed hump, Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Alan Ooi Lim Siang , Standard waste cooking oil and crude palm oil biodiesel production by using mini pilot plant, Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Mohd Azim Bin Norman,Development of combustion in Micro Gas Turbine, Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2016 | Supervisor for Thinesh sharma s/o Jaganadan, Heat generation from Cow Menure as a source of green energy ,Universiti Tun Hussein Onn ,2016 (Final year project , degree ) | Supervisor |
| 2015 | Supervisor for Mohamad Firman Bin Asrol. The Design of Mixer Machine For Ruminant and Fowl Plant Operation. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Muhammad Mustaqim Azman Bin Muhammad Azami. Application of Glycerol/Glycerin as Green Product: Fisibility and Process. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Luqman Hakim Bin Mohamad Masror. Energy Efficiency: Testing Method of Meps Application for Sustainable Development. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Siti Nazhatul Marina Bte Mior Iskandar Shah. (Main Supervisor). 2015-Present (master degree) | Supervisor |
| 2015 | Supervisor for Muhammad Faiz Zahin Bin Jamaludin. The Design of Local Exhaust Ventilation For Chemical Store Application. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Norasikin Binti Ab Rani. The Development and Fabrication of Combustor Mechanism For Waste Material.Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Muhammad Faris Bin Mubin. Energy Consumption on Electrical Appliances Based On Energy Star Rating. Universiti Tun Hussein Onn Malaysia ,2015 ,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Ngo Cham Yeow. The Design and Fabrication of Biodiesel Mini Plant Using Waste Cooking Oil. Universiti Tun Hussein Onn Malaysia, 2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Syed Hussien Bin Syed Ali , The Development Of Flood Warning Using Mobile Applicaton (master degree) | Supervisor |
| 2015 | Supervisor for Nurul Syafiqa Binti Mansor. The Design and Fabrication of Biodiesel Mini Plant by Using The Crude Palm Oil (CPO) as The Feedstock. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Syasya Syafiqah Binti Rizalafandi. Development and Fabrication of Storage Tank as a Medium of Fertilizer Plant. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Sim Ee. Analysis of Chemical Content and Ingredient in Bio-Based Product (Feedstock). Universiti Tun Hussein Onn Malaysia Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Hon Chi Yeong , Design and Fabrication of Plug Flow Biodiesel Production , Universiti Tun Hussein Onn Malaysia ,2015,Final year project (degree) | Supervisor |
| 2015 | Supervisor for Hadi Pranoto. Development of Speed Limiter and Fatigue Alarm for Bus and Trcuk Aplication- Present (Main Supervisor) | Supervisor |
| 2015 | Supervisor for Supaat Zakaria. Development of Activated Carbon as a filter Media in Mechanical Ventilation and Air Conditioning (MVAC)(PHD) | Supervisor |
| 2015 | Supervisor for Dafit Feriyanto. New Washcoat of ?-Alumina Nanosrystalline on New Nickel Oxide (NiO) Catalyst in FeCrAl Substrate for catalytic Converter Using Novel Ultrasonic Approach. 2015-Present (Main Supervisor)(PHD) | Supervisor |
| 2015 | Supervisor for Mohammad Khairul Shaleh Md Asari, Fakulti Teknologi Kejuruteraan. Universiti Tun Hussein Onn Malaysia, 2015-Present (Main Supervisor) | Supervisor |
| 2015 | Supervisor for Fatin Afiqah binti Jajuli (GN150018). Catalytic Converter Developed by Washcoat of ?-Alumina on Nickel Oxide (NiO) Catalyst in Fecral Substrate for Exhaust Emission Control. 2015 ? Present (master degree) | Supervisor |
| 2015 | Supervisor for Hidayatullah Masjud. The Analysis of Indoor Air Quality Inside The Kelana Jaya Light Rail Transit Train in Kuala Lumpur.(Main Supervisor) ( VIVA 13 January 2015) (Graduated),(master degree) | Supervisor |
| 2015 | Supervisor for Arif Aimran Bin Ahmad. The Development of Brake Pad Testing Apparatus. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final year project (degree) | Supervisor |
| 2015 | Supervisor for Harris Fatimi Bin Zulkifli. The Development of Indoor Air Quality Monitoring System. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final year project (degree) | Supervisor |
| 2015 | Supervisor for Muhammad Syafiq Bin Muzarpar. Plastic Recycling into Alternative Source. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Supervisor for Nur Farhanah Binti Amat Ariff. Washcoat of ?-Alumina Nanocrystalline On New Nickel Oxide (NIO) Catalyst in FeCrAl Substrate for Catalytic Converter Using Ultrasonic Bath. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2015 | Examiner for Engineering Technology Program. 1 Nov 2015 ? 1 Nov 2017. IKBN, Temerloh, Malaysia. | Examiner |
| 2015 | Examinar for Muhammad Asyraf bin Kamaruddin. Investigataion on The Effect of Monorail Bogey Parameter on Ride Quality. (Post Graduate). Master of Science (Rel Transport). Universiti Tun Hussein Onn Malaysia. 14 January 2015 | Examiner |
| 2015 | External Examinar for Nur Fauziah binti Jaharudin. Analysis of Particulate Matter Emission in Diesel Engine Operated With Waste Cooking Oil Biodiesel. Sarjana Kejuruteraan (Mekanikal). Universiti Malasyia Pahang. 27 May 2015 | External Assessor |
| 2015 | Supervisor for Muhamad Soqhimi Bin Mohamad Isa , Safety and Health Requirements in Oil and Gas Industries for sustainable development (master degree) | Supervisor |
| 2014 | External Examinar for Nur Atiqah binti Ramlan. A study On Diesel Engine Performance Using Biodiesel From Waste Cooking Oil (WCO) Sarjana Kejuruteraan (Automotif). Universiti Malasyia Pahang. | External Assessor |
| 2014 | External Examinar for Ali Driver. GS33237. Design and Implementation of Portable Solar Power Water Distiller System. Master of Science, Institute of Advance Technology, Universiti Putra Malaysia. 17 Novemeber 2014. | External Examiner |
| 2014 | Supervisor for Mohd. Mahathir Suhaimi Bin Shamsuri ,Monitoring Of indoor Plants application For Indoor Air Quality Improvement (PHD) | Supervisor |
| 2014 | Supervisor for Umi Kalthsom Bt Parjo, Fakulti Teknologi Kejuruteraan. Universiti Tun Hussein Onn Malaysia, 2014-Present (Co- Supervisor)(PHD | Supervisor |
| 2014 | Supervisor for Suhaila Abdul Hamid. Fakulti Teknologi Kejuruteraan, Universiti Tun Hussein Onn Malaysia, 2014-Present (Main Supervisor)(PHD) | Supervisor |
| 2014 | Examiner for Safety and Health (SHO) Officer. 14 April 2014. NIOSH, Bangi | Examiner |
| 2014 | Supervisor for Roslizan Masripan. The Development of Plant Maintenance Scheduling Via Inventory System for Sustainable Plant Operation. 2014- Present,, (master degree) | Supervisor |
| 2014 | Supervisor for Azian Hariri. (Matrix No : GD110130) The Development of Welding Health Hazard. Index for Welding Workplace Safety and Health Enchancement Fakulti Kejuruteraan Mekanikal dan Pembuatan.Universiti Tun Hussein Onn Malaysia, 2011- 2014 ( VIVA on October 2014) (Co-Supervisor) (Graduated)(PHD) | Supervisor |
| 2014 | Supervisor for Mohd Hasbullah Mohd Alwi. The development of safety and Health Management System for Smalland Medium Industy. 2014- Present ,(master degree) | Supervisor |
| 2013 | Examiner for Indoor Air Quality Assessor (IAQ Asessor) 1 August 2013. NIOSH Bangi | Examiner |
| 2013 | External Examiner for Noor Hafiza Binti Nordin ,Master,Universiti Tun Hussein Onn,24 July 2013 | External Examiner |
| 2013 | Examiner for Safety and Health (SHO) Officer. 28 February-1 Mac 2013. NIOSH Tower, Bangi, Selangor Darul Ehsan. | Examiner |
| 2013 | Examiner for Safety and Health (SHO) Officer. 25-26 April 2013. Hotel Ming Garden. Kota Kinabalu Sabah. | Examiner |
| 2013 | Examiner for Safety and Health (SHO) Officer. 27-28 June 2013. NIOSH Tower, Bangi, Selangor Darul Ehsan. | Examiner |
| 2013 | Supervisor for Mohamad Lutfi Bin Abas. Safety Assessment on Biodiesel Pilot Plant Using Pre;omenary Hazard Analysis (PHA) Approach. Universiti Tun Hussein Onn Malaysia. Sem 1 2012/2013 (Jan 2013) | Supervisor |
| 2012 | Supervisor for Nur Faridatun Akmal Binti Mohd Hashim. Local Exhaust Ventilation Performance Test. Universiti Tun Hussein Onn Malaysia. Sem 1 2012/2013 (Jan 2013),Final Year Project (Degree) | Supervisor |
| 2012 | Supervisor for Er Chee Ming, Fakulti Kejuruteraan Awam dan Alam Sekitar, Universiti Tun Hussein Onn Malaysia, 2012-Present. (Co-Supervisor)(PHD) | Supervisor |
| 2012 | Supervisor for Nur Faridatun Akmal Binti Mohd Hashim. Local Exhaust Ventilation Performance Test. Universiti Tun Hussein Onn Malaysia. Sem 1 2012/2013 (Jan 2013) | Supervisor |
| 2012 | Supervisor for Zainal Azman Bin Hasan. The Design and Fabrication of Crusher Machine for Plant Waste Material. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2012 | Supervisoer for Joelne Bin Garangon. Dust In Working Environment: Cement Industry Case Study. Universiti Tun Hussein Onn Malaysia. Sem 2 2012/2013 (May 2013),(Final year project ,degree) | Supervisor |
| 2012 | Supervisor for Mohamad Lutfi Bin Abas. Safety Assessment on Biodiesel Pilot Plant Using Pre;omenary Hazard Analysis (PHA) Approach. Universiti Tun Hussein Onn Malaysia. Sem 1 2012/2013 (Jan 2013),Final Year Project (Degree) | Supervisor |
| 2012 | Supervisor for Joelne Bin Garangon. Dust In Working Environment: Cement Industry Case Study. Universiti Tun Hussein Onn Malaysia. Sem 2 2012/2013 (May 2013) | Supervisor |
| 2012 | Examiner for Indoor Air Quality Assessor (IAQ Asessor) 14-15 Dec 2012. NIOSH Tower. Bangi, Selangor Darul Ehsan. | Examiner |
| 2012 | Examiner for Indoor Air Quality Assessor (IAQ Asessor) 10 April 2012. NIOSH Tower, Bangi, Selangor Darul Ehsan. | Examiner |
| 2012 | Examiner for Indoor Air Quality Assessor (IAQ Asessor) 4 December 2012. NIOSH Tower. Bangi, Selangor Darul Ehsan. | Examiner |
| 2012 | Examiner for Safety and Health (SHO) Officer. 20 - 21 December 2012. NIOSH, Bangi, Selangor Darul Ehsan. | Examiner |
| 2012 | Examiner for Safety and Health (SHO) Officer. 18-19 October 2012. NIOSH Tower, Bangi, Selangor Darul Ehsan. | Examiner |
| 2012 | Examiner for Safety and Health (SHO) Officer. 26-27 April 2012. NIOSH Cawangan Pulau Pinang. Kompleks Sempilai Jaya, Seberang Jaya. Pulau Pinang. | Examiner |
| 2012 | Examiner for Safety and Health (SHO) Officer. 24 February 2012. NIOSH, Bangi | Examiner |
| 2012 | Examiner for SMRK Course-Risk Management. Master Programme OSH and Risk Management Open University.2012 | Examiner |
| 2011 | Coordinator for Subject BDE 4023 (Energy Saving and Management),2011, Universiti Tun Hussein Onn Malaysia | Supervisor |
| 2011 | Raferee : Innovation Fest (JKE), Politeknik Merlimau, Melaka | Referee |
| 2011 | Supervisor for Yusouf Al-Matin Mohd Ismail. M.Eng ,UTHM ,2011-present | Supervisor |
| 2011 | Supervisor for Nor Mohd Razif Noraini, M.Eng, 2011-Present | Supervisor |
| 2011 | Co-Supervisor for Dr Mohd Rafiq bin Mohd Kasri, Dr PH, Universiti Sains Malayisa (USM),2011-Present | Supervisor |
| 2011 | Supervisor for Nuur Azreen Binti Paiman, M.Eng, UTHM , 2011-present | Supervisor |
| 2011 | Supervisor for Ng Chee Seng, M.Eng, UTHM, 2011-Present | Supervisor |
| 2011 | Co-Supervisor for Azian Binti Hariri, PhD, Universiti Tun Hussein Onn Mlaysia, 2011-Present | Supervisor |
| 2011 | Co-Supervisor for Ir Norhalim Hasan, PhD, Universiti Teknikal Malaysia, Melaka (UTEM), 2011-present | Supervisor |
| 2011 | Supervisor for Wan Mohamad Fadhli Bin Wan Mahmood Fauzy. The Brake Pad Study For Motorcycle Application: Risk, Relialibility and Performance. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2011 | Supervisor for Azreen Paiman.( Matrix No : GD110160) Monitoring of Respirable Dust Concentration in Paper Based Industry and Their Health Effect on Workers. 2011-2013 . (Main Supervisor),(master degree) | Supervisor |
| 2011 | Supervisor for Nor Mohd Razif Noraini. (Matrix No : HD100110) Indoor Air Quality (IAQ) Commisioingan and Maintenence in New Building.Universiti Tun Hussein Onn Malaysia, 2011-2013 (master degree) | Supervisor |
| 2011 | Supervisor for Yusof Al-Matin. (No Matrik : HD 100106). Design and Development of Effective Local Exhaust Ventilation System for Weding EnvironmentUniversiti Tun Hussein Onn Malaysia, 2011 ?present. (Main Supervisor) | Supervisor |
| 2011 | Supervisor for Mohammad Izadi Najafabadi, Effects of Intake Temperature and Equivalence Ratio on HCCI Ignition Timing and Emissions of a 2-Stroke Engine. Universiti Putra Malaysia. (Main supervisor: Dr Nuraini Abdul Aziz (UPM), Co- Supervisor AP Ir Dr Nor Mariah Adam (UPM) and Abdul Mutalib Leman. (Graduated), (master degree) | Supervisor |
| 2011 | Supervisor for Nor Syazana Binti Mohd Aminuddin. (Matrix No : GF 120077). Coating Bio-Resistant Test of Different Wall Finishingby Using Zinc Benziate for Indoor Fungal Treatment. Universiti Tun Hussein Onn Malaysia, 2011-2013 (Graduated), (master degree) | Supervisor |
| 2011 | Supervisor for Muhammad Irsyad Bin Ibrahim A Study Of Local Exhaust Ventilation (Lev) System Using Computitational Fluid Dynamics (Cfd) Approach Sem 1 2011/2012 ,Final Year Project (Degree) | Supervisor |
| 2011 | Supervisor for Mohd Firdaus Bin Zakaria Energy Consumption And Management In Sub-Urban Area Sem 1 2011/2012, Final Year Project (Degree) | Supervisor |
| 2011 | Supervisor for Muhd Zullizi Abu Bakar. Conputational Fulid Dynamic Analysis for Local Exhaust Ventilation. Sem 1 2011/2012. UTHM., Final Year Project (Degree) | Supervisor |
| 2011 | Supervisor for Ir Norhalim Hasan, Local Exhaust Ventilation Performance Test. Fakulti Kejuruteraan Mekanikal. Universiti Teknikal Malaysia Melaka 2011-2013 (Waiting for VIVA ). (Co-Supervisor) (PHD) | Supervisor |
| 2011 | Supervisor for Dr Mohd Faiz. Fakulti Perubatan dan Sains Kesihatan.Universiti Sains Malaysia, Kubang Kerian, Kelantan, 2011-Present. (Co-Supervisor)(PHD) | Supervisor |
| 2011 | Supervisor for Muhammad Irsyad Bin Ibrahim A Study Of Local Exhaust Ventilation (Lev) System Using Computitational Fluid Dynamics (Cfd) Approach Sem 1 2011/2012 | Supervisor |
| 2011 | Supervisor for Mohd Firdaus Bin Zakaria Energy Consumption And Management In Sub-Urban Area Sem 1 2011/2012 | Supervisor |
| 2011 | Supervisor for Muhd Zullizi Abu Bakar. Conputational Fulid Dynamic Analysis for Local Exhaust Ventilation. Sem 1 2011/2012. UTHM. | Supervisor |
| 2011 | Supervisor for Tan Kok Sion. To Design and Fabricate Methanol Recovery System for Green Application. Universiti Tun Hussein Onn Malaysia. Sem 2 2014/2015,Final Year Project(Degree) | Supervisor |
| 2011 | Supervisor for Amir Abdullah Muhammad Damanhuri. (GD 110191). Monitoring of Air Conditioning Ducting Using Mechanical Robot for Indoor Air Quality Imprrovement. Universiti Tun Hussein Onn Malaysia, 2011-2013 (Viva 27 September 2013) (Graduated) , (Master degree) | Supervisor |
| 2011 | Supervisor for Ng Chee Seng.( Matrix No : GD110129) A Study Of The Effectiveness Of Local Exhaust Ventilation (LEV) In Training Facilities Building Using Computational Fluid Dynamics (CFD) Approach. Universiti Tun Hussein Onn Malaysia, 2011-2013,(master degree) | Supervisor |
| 2011 | Supervisor for Mohd Sayuti Zainal Abidin.(Matrix No : GD110184) Universiti Tun Hussein Onn Malaysia, 2011 ?2013 (VIVA on 28 December 2014) (Main Supervisor),(master degree) | Supervisor |
| 2011 | Supervisor for Wan Fakhrurrazi bin W Abdul Rahman (GN150017). Simulation on Toxic Gases in Vehicle Exhaust That Are Equip with Modified Catalytic Converter. 2015 ? Present.(master degree) | Supervisor |
| 2011 | Safety and Health Officer Examination (Paper 4- Presentation) | Assessor |
| 2011 | IAQ Examination | Assessor |
| 2011 | Examiner for Work Place Assignment : Safety and Health Officer (NIOSH) | Examiner |
| 2011 | Examiner Board (Industrial Hygiene- NIOSH) | Examiner |
| 2011 | Examiner for Indoor Air Quality Assessor (NIOSH/ National Level),2011 | Examiner |
| 2011 | Safety and Health Examination (NIOSH) | Examiner |
| 2011 | IAQ Examination (paper 3-presentation) | Examiner |
| 2011 | Examiner for Safety and Health Officer Exam (NIOSH/ National Level), 28-29 April, 2011, Bangi, Selangor, Malaysia | Examiner |
| 2011 | Examiner for Indoor Air Quality Assessor (IAQ Asessor) 26 July 2011. NIOSH Bangi. Selangor Darul Ehsan. | Examiner |
| 2011 | Examiner for Indoor Air Quality Assessor (IAQ Asessor) 13 April 2011. NIOSH Bangi. Selangor Darul Ehsan. | Examiner |
| 2011 | Examiner for Safety and Health (SHO) Officer. 28-29 April 2011. NIOSH, Bangi | Examiner |
| 2011 | Coordinator for Subject BDE 4073 (Maintenence and Safety Engineering),2011, Universiti Tun Hussein Onn Malaysia | Supervisor |
| 2010 | Co-Supervisor for Mohd Ikhwan, B.Mech. Eng, Univerisiti Teknologi MARA (UiTM), 2009 | Supervisor |
| 2010 | Co-Supervisor for Mohd Syafiq, B.Mech. Eng, Univerisiti Teknologi MARA (UiTM), 2009 | Supervisor |
| 2010 | Examiner for Indoor Air Quality (IAQ Asessor). 10 April 2013. NIOSH Tower, Bangi | Examiner |
| 2010 | Safety and Health Officer (SHO) Examination 28-31 DISEMBER 2010- PSDC | Examiner |
| 2010 | Examiner for Safety and Health (SHO) Officer. 30 December 2010. PSDC, Kuantan, Pahang | Examiner |
| 2010 | Examination Workshop (Indoor Air Quality and Noise Monitoring), NIOSH, 2010 | Assessor |
| 2009 | Co-Supervisor for Mohd Habeeb Abdulllah, B.Mech Eng. Universiti Teknologi MARA (UiTM,) 2009 | Supervisor |
| 2009 | Co-Supervisor for Mohd Farhan bin Abdullah, B.Mech. Eng, Univerisiti Teknologi MARA (UiTM), 2009 | Supervisor |
| 2009 | Co-Supervisor for Clive Allen William Hunt, B.Mech. Eng. Universiti Teknologi MARA (UiTM), 2008 | Supervisor |
| 2009 | Examination Assessor (Indoor Air Quality and Noise Monitoring), NIOSH, 2010 | Assessor |
| 2009 | Co-Supervisor for Mohd Farhan Kasim, Indoor Environment Quality in workplace, 2009, Degree in Mechanical Engineering, Sem I 2008/2009. Universiti Teknologi Mara. Shah Alam | Supervisor |
| 2009 | Assessor for (UPM safety and health audit), 2009 | Assessor |
| 2009 | Assessor for (UPM safety and health audit), 2009 | Assessor |
| 2009 | Co-Supervisor for Mohd Habeeb Abdulllah, Monitoring of Industrial air pollution.2009, Degree in Mechanical Engineering, Sem I 2008/2009. Universiti Teknologi Mara. Shah Alam | Supervisor |
| 2008 | Supervisor for Che Izzudin The development of Brake Pad Testing Apparatus for Teaching and Learning Application. Universiti Tun Hussein Onn Malaysia. Sem 1 2008/2009 | Supervisor |
| 2008 | Co-Supervisor for Clive Allen William hunt The development of Air pollution monitoring System, Degree in Mechanical Engineering, MARA University of Technology. Sem I 2008/2009. Universiti Teknologi Mara. Shah Alam | Supervisor |
| 2008 | Supeervisor for Mohd Farouk Wahid. The performance of NGV Engine. Universiti Tun Hussein Onn Malaysia. Sem 1 2008/2009 | Supervisor |
| 2007 | Supervisor for Niezam Kassim ?Kaedah Graf, Ingat Dan Amal Dalam Tajuk Keselamatan Bengkel Dalam Teori Automotif?, - Ijazah Sarjana Muda (OUM) Sem September 2007 | Supervisor |
| 2007 | Supervisor for Azman Saibani ?Keberkesanan Penggunaan Komputer Di Dalam Pengajaran Dan Pembelajaran Teori Teknologi Automotif Subtajuk Enjin Petrol Empat Lejang Bagi Enjin Pembakaran Dalam?, Ijazah Sarjana Muda (OUM). Sem Jan 2007 | Supervisor |
| 2007 | Supervisor for Tan Bee Ling ?Keberkesanan Kaedah koperatif Bagi meningkatkan Kefahaman pelajar Terhadap Tajuk Kegunaan Bahan Dari Alat Tangan Tingkatan 1?, - Ijazah Sarjana Muda (OUM) Sem September 2007 | Supervisor |
| 2007 | Supervisor for Syed Zulkafli Syed Ab.Rahman ?Mengkaji Keberkesanan Kaedah Ganjaran Dan Dendaan Dalam Meningkatkan Minat Pelajar Dalam Matapelajaran Kemahiran Hidup Bagi Tajuk Rekabentuk dan Penghasilan Projek di SMK Tun Aminah Batu Pahat?, - Ijazah Sarjana Muda (OUM) Sem September 2007 | Supervisor |
| 2007 | Supervisor for Izen Aman ?Faktor-Faktor Yang Menentukan Keberkesanan Pengajaran Menggunakan Komputer Bagi Matapelajaran Lukisan Geometri Dan Mesin Untuk Meningkatkan Pemahaman Pelajar Tingakatan 4 ABM di Sekolah Menengah Teknik Kluang, Johor?, Ijazah Sarjana Muda (OUM), Sem May 2007 | Supervisor |
| 2007 | Supervisor for Azhar Sanuddin ?Keberkesanan Pengunaan Papan Lukisan Berputar Dalam Pengajaran Dan Pembelajaran Lukisan Geometri Dan Automotif?, Ijazah Sarjana Muda (OUM), Sem May 2007 | Supervisor |
| 2007 | Supervisor for Raja Amir Hamzah Raja Ali. ?Kesediaan Belajar Pelajar Di Bengkel Menservis Dan Membaiki Kenderaan Dipengaruhi Oleh Pengetahuan Sedia Ada Hasil Dari Pembelajaran Yang Berkesan Teknologi Automotif?, Ijazah Sarjana Muda (OUM). Sem May 2007 | Supervisor |
| 2007 | Supervisor for Isuzana Ismail. ?Keberkesanan Kaedah Demontrasi Dalam Pengajaran Dan Pembelajaran Lukisan Geometri Dan Penyejukan Dan Penyaman Udara Tingkatan 4 Di Sekolah Menengah Teknik Kluang?, Ijazah Sarjana Muda (OUM). Sem Jan 2007 | Supervisor |
| 2007 | Supervisor for Rosmaini Jasuli ?Keberkesanan Penggunaan Power Point Sebagai Media Pengajaran Dalam Matapelajaran Teknologi Kimpalan Dan Fabrikasi Logam Di Bawah Tajuk Herotan Kimpalan Bagi Pelajar Tingkatan 4 Kfl?, Ijazah Sarjana Muda (OUM). Sem Jan 2007 | Supervisor |
| 2007 | Supervisor for Fadzil Hussen. ?Mengenalpasti Tahap Kognitif Pelajar Bagi Mata Pelajaran Lukisan Teknik Kursus Penyejukan Dan Penyamanan Udara Terhadap Pandangan Isometri Di Sekolah Menengah Teknik Segamat?, Ijazah Sarjana Muda (OUM). Sem Jan 2007. | Supervisor |
| 2007 | Supervisor for Mohammad Sehaini Bin Jimon.?Kemahiran Berfikir Dan Penerapan Nilai Murni Dalam Lukisan Geometri Dan Berkaitan Penyejukan Dan Penyamanan Udara (Ppu) Di Sekolah Menengah Teknik Kluang,? , Ijazah Sarjana Muda (OUM). Sem Jan 2007 | Supervisor |
| 2007 | Co-Supervisor for Mohd Iffat Jamal Abd Nasir, ?Telemitary Robot (Temibot)? - Ijazah Sarjana Muda. Sem I 2007/2008. (UTHM) | Supervisor |
| 2007 | Supervisor for Azhar Abdul Rahman ?Mengkaji Keberkesanan Pembelajaran Koperatif Dalam Proses P&P Bagi Matapelajaran teknologi Kimpalan Bertujuan Untuk Menarik Minat Dan Prestasi Pelajar?, Ijazah Sarjana Muda (OUM) Sem September 2007 | Supervisor |
| 2007 | Supervisor for Mohd Shahibolbahri Mohamad ?Keberkesanan Kaedah Konstektual Dalam Tajuk Sistem Brek Teknologi Automotif Pelajar Tingkatan 4 Auto Di S.M. teknik Batu Pahat?, - Ijazah Sarjana Muda (OUM). Sem September 2007 | Supervisor |
| 2007 | Supervisor for Noor Azilah Abdullah ?Keberkesanan Guru Meningkatkan Kemahiran Pelajar Di Dalam Pembelajaran Teknologi Binaan Bangunan Bagi Tajuk Kerja Bata Dan Mengaplikasi Kepada Amali Kerja Bata Dengan Bantuan Kaedah Pembelajaran Secara Koperatif Berbanding Pembelajaran Secara Tradisional Di Sekolah Menengah Teknik Batu Pahat?, Ijazah Sarjana Muda (OUM), Sem May 2007 | Supervisor |
| 2007 | Supervisor for Zulkifli Sahan ?Keberkesanan Pengajaran Masteri Berbantukan Komputer Dalam Pengajaran Dan Pembelajaran Teknologi Penyejukan Dan Penyamanan Udara Mengenai Tajuk Beban Haba ( Heat Load) ?, Ijazah Sarjana Muda (OUM). Sem Jan 2007 | Supervisor |
| 2007 | Supervisor for Samsudin Abdul Hamid ?Penggunaan Kaedah Kontekstual Dalam Proses Pengajaran Dan Pembelajaran Untuk Meningkatkan Kefahaman Pelajar Dalam Matapelajaran teknologi Penyejukan Dan Penyamanan Udara?, - Ijazah Sarjana Muda (OUM) Sem September 2007 | Supervisor |
| 2006 | Supervisor for Norrulazamudin Norrahman, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2006 | Supervisor for Sudarsan A/L Chandasekaran. Integrated Indoor Air Quality Monitoring and Simulation for Working Environment. Universiti Tun Hussein Onn Malaysia.Sem 1 2006/2007 | Supervisor |
| 2006 | Supervisor for Umashanger A/L Karunanithi.The development of cool box for groceries item 2006. Universiti Tun Hussein Onn Malaysia. | Supervisor |
| 2006 | Supervisor for Mohd Zubir Abdullah.The developmentof Indoor AirQuality Robot. Universiti Tun Hussein Onn Malaysia.Sem 1 2006/2007 | Supervisor |
| 2006 | Supervisor for Shamsiah Shamsuddin. The IAQ and simulation for FKMP laboratory (Ijazah Sarjana Muda) . Universiti Tun Hussein Onn Malaysia.Sem 1 2006/2007 | Supervisor |
| 2006 | Supervisor for Ahmad Juhari Bin Adnan ?Pembelajaran Lukisan Berbantu Komputer (Autocad) Dalam Pengajaran Lukisan Geometri Dan Berkaitan Di Sekolah Menengah Teknik Muar?, Ijazah Sarjana Muda (OUM).Sem May 2006. | Supervisor |
| 2006 | Supervisor for Azmi B.Abd Rahman. ?Keberkesanan Pengajaran Menggunakan Komputer Bagi Mata Pelajaran Lukisan Geometri Dan Mesin Untuk Meningkatkan Pemahaman Pelajar?, Ijazah Sarjana Muda (OUM). Sem May 2006 | Supervisor |
| 2006 | Supervisor for Halimah Bte Sulaiman.?Peningkatan Kefahaman Pelajar Melalui Kaedah Inkuiri Penemuan Dalam Tajuk Litar Elektrik Mata Pelajaran Kemahiran Hidup Tingkatan Satu?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Mohd. Yusof Bin Azman.?Keberkesanan Pengajaran Dan Pembelajaran Secara Koperatif Dalam Matapelajaran Amali Kimpalan Dan Fabrikasi Logam?, Ijazah Sarjana Muda (OUM). Sem May 2006 | Supervisor |
| 2006 | Supervisor for Mohamed Zin Bin Sahat ?Keberkesanan Strategi Pengajaran Dan Pembelajaran Secara Kontekstual Dapat Meningkatkan Kualiti Pencapaian Pelajar Kimpalan Di Dalam Teknologi Kimpalan Dan Fabrikasi Logam Bagi Tajuk Alatan Tangan?, Ijazah Sarjana Muda (OUM) Sem May 2006. | Supervisor |
| 2006 | Supervisor for Norrasimah Binti Separi ?Pembelajaran Koperatif Meningkatkan Prestasi Akademik Dan Hubungan Sosial Berbanding Pembelajaran Traditional Bagi Mata Pelajaran Kemahiran Hidup?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Sahrizal Bin Md Sapie . ?Permasalahan Penggunaan Teknologi Maklumat Dan Komunikasi Dalam Pengajaran Dan Pembelajaran Mata Pelajaran Kemahiran Hidup?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Rubaie Hj Said ?Keberkesanan Pengajaran Teknologi Penyejukan Dan Penyamanan Udara Mengunakan Kaedah Multimedia Bagi Pelajar Tingkatan 4 S.M Teknik Kluang Johor?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Aminuddin Bin Hamzah.?Penggunaan Kaedah Konteksual Untuk Meningkatkan Kefahaman Pelajar Mempelajari Subtajuk Sumber Elektrik Matapelajaran Kemahiran Hidup Tingkatan Satu?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Jamaludin Bin Salimin.?Pengajaran Berbantukan Tayangan Audio Visual Dalam Mata Pelajaran Amali Menservis Dan Membaiki Kenderaan Automotif ?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Zulkainain Bin Mohd.?Keberkesanan Strategi Dan Kaedah Pengajaran Dan Pembelajaran Secara Kontekstual Bagi Mata Pelajaran Teknologi Fabrikasi Logam Tingkatan 4 KursusKimpalan Dan Fabrikasi Logam Dalam Tajuk ?Alat Pengukur, Penguji Dan Penanda? Di Sekolah Menengah Teknik Muar?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2006 | Supervisor for Md. Zuki Bin Mat Il ?Peningkatan Pemahaman Pelajar Melalui Cara Penggunaan Bahan Bantu Mengajar Untuk Tajuk Lukisan Teknik Dalam Mata Pelajaran Kemahiran Hidup Pilihan 1 (Kemahiran Teknikal) Bagi Pelajar Tingkatan Dua Di Smk. Sultan Abdul JalilKluang?, Ijazah Sarjana Muda (OUM). Sem May 2006. | Supervisor |
| 2005 | Supervisor for Wan Norhazlim Wan Mustafa, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Ismail Husaini `Pengurusan Peralatan Keselamatan Berdasarkan Piawaian OSHA? 2005 | Supervisor |
| 2005 | Supervisor for Mohammad Kamal Abdullah, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Faizal Rosdi, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Teh Kok Hee, B.Mech Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Roziah Lwai@Alwi , B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Ahmad Azwa Kassim, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Ismail Husaini, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Muhammad Hafiz Kamarudin, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Ahmad Firdaus Ab Hadi, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Mohd Shakir Bahari, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Mazrul Shazli Mamat, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Salwani Salamat@Suparman, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Lee St Min, B.Mech.Eng, KuiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Minah Anak Ayol, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Co-Supervisor for Rafidah Md. Osman, B.Mech.Eng, KUiTTHO, 2005 | Supervisor |
| 2005 | Supervisor for Aliff Ab. Tahir `Study on Filtration: A cause and solution for indoor air quality?. 2005 | Supervisor |
| 2005 | Supervisor for Faizal Rosdi `Diagnosis of Safety and Health in Workplace Using an Expert System? 2005 | Supervisor |
| 2005 | Supervisor for Teh Kok Hee `Diagnosis Safety and Health in Workplace? 2005 | Supervisor |
| 2005 | Co-Supervisor for Lee St Min ?A Study on the Potential of Oil Palm Component as Commercial Burning Material? 2005 | Supervisor |
| 2005 | Co-Supervisor for Salwani Salamat@Suparman `Mengkaji Tahap Keselesaan Terma di dalam Persekitaran Kerja di Industri? 2005 | Supervisor |
| 2005 | Supervisor for Wan Norhazlim Wan Mustafa `Study on Local Exhaust and General Ventilating System for Welding Workshop? 2005 | Supervisor |
| 2005 | Supervisor for Nurul Zaidi Kasbolah `Kajian Terhadap Tahap Pengetahuan Ahli Jawatankuasa Keselamatan Kilang Terhadap Kualiti Udara di Dalam Kilang? 2005 | Supervisor |
| 2005 | Supervisor for Mohammad Kamal Abdullah `Air and Gases Monitoring at Welding Workshop? 2005 | Supervisor |
| 2005 | Supervisor for Wan Noraniza Wan Montil `Heat Stress in Workplace (Hot Work)? 2005 | Supervisor |
| 2005 | Supervisor for Muhammad Hafiz Kamarudin ?Kajian Ke Atas Sifat Kehausan Pelapik Brek Kereta Tempatan? 2005 | Supervisor |
| 2005 | Co-Supervisor for Mazrul Shazli Mamat `Kajian Terhadap Habuk dan Kualiti Udara Dalam Ruang Bilik? 2005 | Supervisor |
| 2005 | Co-Supervisor for Mohd Shakir Bahari `Rekabentuk Bilik Bersih di Industri? 2005 | Supervisor |
| 2005 | Co-Supervisor for Ahmad Firdaus Ab Hadi ?Kajian Keselamatan dan Kesihatan Pekerja di Stesen Bas? 2005 | Supervisor |
| 2005 | Supervisor for Norrulazamudin Norrahman `Multi-Zone System in a Passenger Car? 2005 | Supervisor |
| 2005 | Supervisor for Roziah Lwai@Alwi `Thermal Comfort in Car (National Car)? 2005 | Supervisor |
| 2005 | Supervisor for Ahmad Azwa Kassim `Indoor Air Quality at Batik Factory in Terengganu? 2005 | Supervisor |
| 2005 | Supervisor for Nurul Zaidi Kasbolah, B.Mech Eng, KUiTTHO, 2005 | Supervisor |
| 2004 | Supervisor for Hasmadi Mat Safar, B. Mech Eng, KUiTTHO, 2004 | Supervisor |
| 2004 | Supervisor for Mohd Azrul Nizam Mohammad, B. Mech. Eng, KUiTTHO, 2004 | Supervisor |
| 2004 | Supervisor for Lim Pio Tiek , B.Mech.Eng, KUiTTHO, 2004 | Supervisor |
| 2004 | Supervisor for Aliff Ab. Tahir, B.Mech.Eng, 2005, KUiTTHO, 2005 | Supervisor |
| 2004 | Co-Supervsor for Minah Anak Ayol `Simulation of Air Movement Using Convection Ventilator in Terrace House?2004 | Supervisor |
| 2004 | Supervisor for Lim Pio Tiek `Study the Bearing Life (Failure) by Using MHC-MEMO? 2004 | Supervisor |
| 2004 | Supervisor for Hasmadi Mat Safar `Sistem Pengendalian Barang Berautomasi (Automated Material Handling System)? 2004 | Supervisor |
| 2004 | Co-Supervisor for Rafidah Md. Osman `Interaction of Room Air Motion and Human Body in Confined Spaces? 2004 | Supervisor |
| 2004 | Supervisor for Mohd Azrul Nizam Mohammad `Pengunaan Carbon Brushes Pada Sistem Brek Kenderaan Untuk Mengesan Kehausan Pada Brake Pad Hadapan (Disc Brake)? 2004 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2016 | Extenal Prog. Advisor for TATI University College (TATIUC),(1 Feb 2016) | National |
| 2016 | Reviewers for Athens Journal of Sciences ,2016 | International |
| 2016 | Reviewer for International Conference on Advances of Clean Energy Research (ICACER 2016), Bangkok, Thailand 2016. (Scopus Index) | International |
| 2016 | Reviewer for International Conference Green Design and Manufacturing (ICONGDM 2016), Phuket Thailand, 1-2 May 2016. (Scopus Index) | International |
| 2015 | Innovation award for Nutri-Planter Biodegradable Nursery Seeding Pot ,November 2015 | University |
| 2015 | Panel (Evaluation for Short Term Research Grant, STG, UTHM)- 2015 | University |
| 2015 | Panel(Evaluation for FRGS, ORICC, UTHM)-2015- Present | University |
| 2015 | Member of Ecosystem Innovation: Malaysia Education Future Plan Development, 2015 ? 2025. 1 May 2015. UTHM. | University |
| 2015 | Innovation award :Speed Limiter on Conventional Engine by using Automation Vehicles Contrl Systems (AVCS),November 2015 | University |
| 2015 | Innovation Award for Activated Carbon from Palm Shell for Water Treatment, November 2015. | University |
| 2015 | Panel for KOLOKIUM Research Series 2. 11 November 2015. UTHM. | University |
| 2015 | Reviewer on Malaysian Technical Universities Conference on Engineering and Technology (MUCET2015) | National |
| 2015 | Chairman, 1st Colloqium, Faculty of Engineering Technology, Hall 3, UTHM.Panel for Etics Paper Presentation 2015. University Malaysia Pahang (UMP), Pahang, Malaysia. 22 June 2015. | National |
| 2015 | Panel for National Conference on Engineering Technology (NCET), Pusat Latihan Teknologi Tinggi (ADTEC), Taiping, Perak, Malaysia. 14th ? 15th September 2015. | National |
| 2015 | Panel ( External Evaluation Panel for Politeknik Programme). August 2012- August 2015 | National |
| 2015 | Reviewer for 3rd National Conference on Engineering Technology (NCET). Pusat Latihan Technology (ADTEC) Taiping, Perak, Malaysia. 7th -8th September 2015 | National |
| 2015 | Felo for Johor Bio Talent Development Center,2015 | National |
| 2015 | Member of Malaysian Tribology Society (MYTRIBOS) ?October 2015 | National |
| 2015 | Visiting Professor for Kookmin University, South Korea,(2015) | International |
| 2015 | Yang di-Pertua PIBG Sekolah Menengah Sains Batu Pahat,2015 | District |
| 2015 | Reviewer for Conference on Wood Based Technology, Engineering & Innovation 2015(NCWE?15). Kota Kinabalu, Sabah. Malaysia | State |
| 2014 | Panel for Final Degree Project (PSM 1). Sem 2, 2014/2015. UTHM | University |
| 2014 | Panel for KOLOKIUM 4. 28 December 2014. UTHM. | University |
| 2013 | (SMHH 5013) ,Industrial Hygiene. Sem Jan 2013, Open Universiti Malaysia ( 6 Students)(master) | University |
| 2013 | Panel (Evaluation for RAGS, ORICC, UTHM)-2013-Present | University |
| 2013 | Panel (Evaluation for FRGS, ORICC, UTHM)-2014-Present | University |
| 2013 | Hotel New York, Johor Bahru. 6-8 March 2013. Organized by Politeknik Ibrahim Sultan. | National |
| 2013 | Panel for Post Graduate Progress Report Presentation. Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Malaysia 17 Jun 2013. | National |
| 2013 | Panel for Innovation Day. 13 October 2011. Politeknik Merlimau. Melaka.Fasilitator, Reaseach Proposal Evaluation Worksyop. 6 February, Hall 5, UTHM,Chairman of VIVA session.(2 session) 2013 | National |
| 2013 | Advisory Board, International Science and Technical Conference.Aect and Sakarya University (ISSN: 2146-7382) 2013-Present | International |
| 2013 | Vice Chairman ? Malaysian Society for Occupational Safety and Health (MSOSH- Johor Branch) 2013-2014- Present | National |
| 2013 | Examiner for Safety and Health (SHO) Officer. 25-26 April 2013. Hotel Ming Garden. Kota Kinabalu Sabah. | National |
| 2013 | Promoter National Higher Learning Carnival 2013 | National |
| 2013 | Moderator for Research, Innovation and Commercialization Worksyop, 30 Jan- 1 Feb 2012, Corus Paradise Resort, Port Dickson, Negeri Sembilan. Organized by NIOSH | National |
| 2013 | Program Advisory Committee (Diploma in Mechanical Engineering- Plant ), Politeknik Seberang Perai, Pulau Pinang. 2013-Present | National |
| 2013 | Panel (External) for Advance Diploma in Mecanical Engineering Program and Degree in Manufacturing Engineering Technology (Supply Chain Management) with Honours. Politeknik Ungku Omar, Ipoh, Perak 26-28 August 2013 | National |
| 2012 | Member (Task Force) for Technology Park, UTHM, October 2012-Present | University |
| 2012 | Ahli Jawatankuasa PIBG, Sekolah Kebangsaan Merlimau 2, Melaka Sesi 2012-2013 | District |
| 2012 | Panel (Evaluation for FRGS, ORICC, UTHM)-2012-Present | University |
| 2012 | Investigation Team on Microbe in New Building of UTHM- 2012-Present | University |
| 2012 | Reviewer 6th International Conference on Mechanical and Manufacturing Engineering (ICME), UTHM, Malaysia.19th-20th October. | University |
| 2012 | Session Chariman. Session title: Physical Hazard-Radiation & Heat Stress. The 9th IOHA International Scientific Conference. Kuala Lumpur Convention Center (KLCC) 16-20 September 2012. | National |
| 2012 | Reviewer, Journal of Technical Education and Training. 2012 . (ISSN 2229-8932) | National |
| 2012 | Panel for Fundamental Research Grant Scheme-FRGS (MOHE), The Royal Hotel, Kuala Lumpur 2012. Organized by MOHE | National |
| 2012 | Panel (External Evaluation Panel) Politeknik Final Exam Item Evaluation Workshop 2012. | National |
| 2012 | Panel (External Evaluation Panel) Politeknik Final Exam Item Evaluation Worksyop 2012. Best Western Marina Island Resort, Lumut, Perak, 10-14 September 2012. Organized by Politeknik Ungku Omar (PUO) | National |
| 2012 | Panel (Evaluation panel for National Research colloquium 2012), Politeknik Merlimau,2012 | National |
| 2012 | Panel for Exam Paper Quality for Politeknik Malaysia,( MOHE) 2012- 2015.Present | National |
| 2012 | Reviewer, Jurnal Teknologi. UKM. 2012 | National |
| 2012 | Program Advisory Committee,( Diploma in Mechanical Engineering-Automotive), Politeknik Sultan Haji Ahmad shah, Kuantan, Pahang. 2012- Present | National |
| 2012 | Full Member of Malaysian Industrial hygiene Association (MIHA)-Present,2012 | National |
| 2012 | Full Member of Malaysian Society of Occupational Safety and Health (MSOSH)-Present,2012 | National |
| 2012 | Reviewer. The 2012 International Conference on Agricultural, Food and Biological Engineering (ICAFBE 2012) Guangzhou, China, May 11-13, 2012. | International |
| 2012 | Editorial Board, ARPN Journal of Science and Technology, Feb 2012 (ISSN: 2225-7217) -Present | International |
| 2012 | Editorial Board, International Journal of Engineering and Applied Sciences (EAAS)( ISSN 2305-8269)-Present. | International |
| 2012 | Editorial Board, Asian Journal on Quality. Emerald Group Publishing Limited. United Kingdom. (ISSN 1598-2688)-Present | International |
| 2012 | The 2nd International Conference on Mechanical and Manufacturing Engineering 2012 (ICME2012) 4-6 December 2012,Universiti Tun Hussein Onn Malaysia.(Paper reviewer) | International |
| 2012 | International Occupational Hygiene Association (IOHA) ? International Scientific Conference 2012 in Kuala Lumpur, Malaysia on the 15th ? 19th September 2012 (Scientific Committee).Organized by MIHA. | International |
| 2012 | International Conference on Industrial Engineering and Operations Management (IEOM 2012) Istanbul, Turkey, July 3-6, 2012 . Scientific Committee. Organized by the Institute of Industrial Engineers (IIE) and Institute of Operations Research and The Management Science (INFORMS). | International |
| 2012 | Panel (Evaluation for ERGS, ORICC, UTHM)-2012-Present | University |
| 2011 | Innovation award for 6th Invention ,Innovation &Design,UiTM,2010 Industrial Air Pollution Wireless Monitoring system,2011 | University |
| 2011 | Innovation award for Industrial Air Pollution Wireless Monitoring System(AIP-W-MOS),PECIPTA 2011 | International |
| 2011 | Paper Rewiewer- 2nd International Conference on Industrial Engineering and Operation Management, 21-24 January 2011, Kuala Lumpur | International |
| 2011 | Technical Committee, 3rd International Conference on Industrial Engineering and Operation Management (IEOM2012), Istanbul, Turkey, July 3-6,2012 | International |
| 2011 | Technical Comittee, International Conference Risk Management, Beijing, China, IASTED, 2011 | International |
| 2011 | Scientific Committee, Building Services, Mechanical, and Building Industry Days Conference and Exhibition BSMBID 2011 , Debrecan, Hungary | International |
| 2011 | MIHA-IOHA 2012 Scientific Committee, | International |
| 2011 | Reviewer International Journal of Occupational Safety and Health (ISSN 2091-0878) | International |
| 2011 | Reviewer, International Journal of Integrated Engineering. 2011. (ISSN : 2229-838X) | International |
| 2011 | Reviewer Emerald Emerging Markets Case Studies [EEMCS] (ISSN 2045-0621) | International |
| 2011 | International Program Committee (IPC), The International Conference on Management Science and Risk (MSR 2011). October 17-19, Beijing China. 2011. (Paper reviewer). | International |
| 2011 | The 2nd International Conference on Mechanical and Manufacturing Engineering 2011 (ICME2011) 6th of June to 8th June in Putrajaya, Kuala Lumpur, Malaysia.(Paper reviewer) | International |
| 2011 | International Conference on Industrial Engineering and Operations Management (IEOM 2011) January 22 - 24, 2011 Kuala Lumpur, Malaysia.(Paper reviewer). Organized by the Institute of Industrial Engineers (IIE) and Institute of Operations Research and The Management Science. | International |
| 2011 | Malaysian Technical Universities International Conference on Engineering and Technology. (Technical Committee),13-15 November 2011. Katerina Hotel. Batu Pahat. Johor.Malaysia. Organized by UTHM. | International |
| 2011 | CIDB Greencard registered : No 1514932 | National |
| 2010 | Graduate Member Institute of Engineer Malaysia (IEM)- Present,2010 | National |
| 2010 | Member of Industrial Hygiene Exam Committee (NIOSH)- present,2010 | National |
| 2010 | Panel for Technical Standard(JPTS) for NOSS | National |
| 2010 | Examination Panel for Safety and Health Officer (NIOSH), 2010-present | National |
| 2010 | Examination Panel for Indoor Air Quality Assessor (NIOSH) 2009- present | National |
| 2009 | Panel for Safety and Health Weeek. UPM.22-24 Dec 2009 | National |
| 2009 | Innovation award for 2009 Invention, Innovation and Design,IID UiTM,2009 Toxic Gas Monitoring System (TOMOS) | University |
| 2008 | Innovation award for 2008 Invention, Innovation and Design ,IID UITM ,2008 Indoor Air Pollution Measurement system | University |
| 2007 | Innovation award for Invention, Innovation and Design ,UITM 2007,Indoor Air Pollution Measuring System (IAPMAS) | University |
| 2007 | Innovation award for 2007 Invention , Innovation ada Design,IID UITM ,2007AGV for Industrial Air Pollution (IAP)Data Acquisition System . | University |
| 2007 | Innovation award for Internationla Exposition of Research and Invention of Institution of Higher Learning,PECIPTA 2007 | University |
| 2007 | Innovation award for (ITEX2007) (18-20May 2007) Indoor Air Quaiitydata Capture (dCAP)-silver metal | National |
| 2007 | Innovation award for (ITEX2007) Groceries Refreshing Cool Box for Transport Application (GRI-DEAL),May 2007 | International |
| 2007 | Member of Malaysia Association of Creativity and Innovation (MACRI)-present,2007 | National |
| 2007 | Innovation award for Fluorescent Service Kit (Fs-Kit),IENA,Nuremberg Germany November 2007 | International |
| 2007 | Innovation award for Industrial Air Pollution Monitoring System (Air-PoMS) ,IENA , Nuremberg Germany 2007 | International |
| 2007 | Innovation award for 18th International Invention Innovation Industrial Design, Tecchnology Exhibition 2007 | International |
| 2007 | Innovation award for International Exposition of Research and Invention of Instututionof Higher Learning PECIPTA 2007 | National |
| 2006 | Member of Institut Tenaga Malaysia (INTEM)-present,2006 | National |
| 2006 | Member of Asian Youth Research Circle (AYRC), AKEPT, MOHE- Present,2006 | National |
| 2006 | Innovation award for 17th Internation Invention Innovation Industrial Design &Technology Exhibition 2006,(ITEX2006)"Automatic Canvas (OTOVAS)" | International |
| 2006 | Innovation award for 17th Internation Invention Innovation Industrial Design &Technology Exhibition 2006,(ITEX2006)"The Design Of front Brake Pad Alert System foe national Car" | International |
| 2006 | Innovation Award for Seoul International Invention Fair 2006(SIIF2006)"Automated Guided Vehivle for Indoor Air Quality Monitoring | International |
| 2006 | Innovation Award for Seoul International Invention Fair 2006(SIIF2006)"Automated Canvas(OTOVAS)" | International |
| 2006 | Innovation award for 34th International Invention Innovation Industrial Design & Technology Exhibition 2006, Genava ,Switzerland "Teaching & Learning Apparatus For Pressure & Temperature Based System | International |
| 2006 | Innovation Award for Seoul International Invention Fair 2006 (SIIF2006)"BRAKE Pad Alert System " | International |
| 2005 | Innovation Award for 16th International Invention Innovation Industrial Design & Tehcnology Exhibition 2005(ITEX2005) "Teaching & Learning Apparatus for Pressure &Temperature Based System" | International |
| 2005 | Member of Board of Engineer (BEM) ?present,2005 | National |