Staff Profile
| Full Name | PROF. MADYA Dr. NIK HISYAMUDIN BIN MUHD NOR |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR) |
| Designation | DS54 - PROFESOR MADYA |
|
PENGARAH PEJABAT AM PUSAT INOVASI DAN PENGKOMERSILAN |
Field of Expertise
| Field Category (KPT) | ENGINEERING AND TECHNOLOGY |
|---|---|
| Field (KPT) | Mechanical Engineering |
| Field of Specialization (KPT) | Machine Design |
Areas of Research Interest
| 1. | Product Design |
| 2. | Indutrial Waste and E-Waste Recycling |
| 3. | Quality Tools in Higher Education |
Innovation Field of Interest
| 1. | Product Development |
| 2. | Innovative Teaching Rools |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2011 | DOKTOR FALSAFAH FUNCTIONAL MATERIALS ENGINEERING | TOYOHASHI UNIVERSITY OF TECHNOLOGY |
| 2004 | SARJANA KEJURUTERAAN MEKANIKAL (PEMBUATAN) | TOYOHASHI UNIVERSITY OF TECHNOLOGY |
| 2002 | SARJANA MUDA KEJURUTERAAN MEKANIKAL (PEMBUATAN) | TOYOHASHI UNIVERSITY OF TECHNOLOGY |
| 2000 | DIPLOMA KEJURUTERAAN (MEKANIKAL) | MIYAKONOJO NATIONAL COLLEGE OF TECHNOLOGY |
Professional Appointments
| DS54 - Profesor Madya |
Management Experience
| Year | Description |
|---|---|
| 2018 - 2020 | Pengarah
Pusat Inovasi dan Pengkomersilan |
| 2017 - 2018 | Timbalan Pengarah
Pusat Inovasi dan Pengkomersilan |
| 2016 - 2017 | Felo
Institut Ahli Sunnah Wal Jamaah |
| 2015 - 2017 | Timbalan Dekan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Inovasi, Pengkomersilan Dan Perundingan (ICC) |
| 2012 - 2013 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
| 2011 - 2012 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 01/06/2016 - 31/07/2017 | Design Society
| Associate Member | Antarabangsa |
| 01/01/2008 - 31/12/2011 | Iron and Steel Institute of Japan (ISIJ)
| Member | Antarabangsa |
| 01/01/2013 - 31/12/2013 | International Economics Development Research Center (IEDRC)
| Senior Member | Antarabangsa |
| 03/06/2013 - 31/12/2013 | International Association of Engineers (IAENG)
| Member | Antarabangsa |
| 01/02/2012 - 30/06/2013 | Design Society
| Associate Member | Antarabangsa |
| 03/05/2016 - 31/12/9999 | International Association Of Engineers (IAENG) - Society Of Industrial Engineering
| Ahli | Antarabangsa |
| 01/01/2010 - 31/12/2010 | Japan Society of Production Management (JPSM)
| Member | Antarabangsa |
| 01/01/2015 - 31/12/2015 | Malaysia Society For Engineering And Technology
| Ahli Biasa | Kebangsaan |
| 01/03/2016 - 31/12/2016 | Majlis Rekabentuk Malaysia (MRM)
| Ahli | Kebangsaan |
| 28/12/2007 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2016 | Integrated Engineering Design [BDA40804], Sesi 2016/2017 Semester 1 Seksyen 3,4,9, Universiti Tun Hussein Onn Malaysia, 2016. | University |
| 2016 | Integrated Engineering Design [BDA40804], Sesi 2015/2016 Semester 2 Seksyen 1-2, Universiti Tun Hussein Onn Malaysia, 2016. | University |
| 2015 | Integrated Engineering Design [BDA40804], Sesi 2014/2015 Semester 2 Seksyen 1-3, Universiti Tun Hussein Onn Malaysia, 2015. | University |
| 2015 | Product Lifecycle Management [MDC10903], Sesi 2015/2016 Semester 1 Seksyen 1, Universiti Tun Hussein Onn Malaysia, 2015. | University |
| 2015 | Product Lifecycle Management [MDC10903], Sesi 2014/2015 Semester 2 Seksyen 1, Universiti Tun Hussein Onn Malaysia, 2015. | University |
| 2015 | Integrated Engineering Design [BDA40804], Sesi 2015/2016 Semester 1 Seksyen 3-4, Universiti Tun Hussein Onn Malaysia, 2015. | University |
| 2014 | Engineering Design [BDA40203], Sesi 2013/2014 Semester 2 Seksyen 1-2, Universiti Tun Hussein Onn Malaysia, 2014. | University |
| 2014 | Integrated Engineering Design [BDA40804], Sesi 2014/2015 Semester 1 Seksyen 1, Universiti Tun Hussein Onn Malaysia, 2014. | University |
| 2014 | Engineering Design [BDA40203], Sesi 2014/2015 Semester 1 Seksyen 4-5, Universiti Tun Hussein Onn Malaysia, 2014. | University |
| 2013 | Engineering Design [BDA40203], Sesi 2012/2013 Semester 2 Seksyen 1-4, Universiti Tun Hussein Onn Malaysia, 2013. | University |
| 2013 | Engineering Design [BDA4023], Sesi 2012/2013 Semester 2 Seksyen 1, Universiti Tun Hussein Onn Malaysia, 2013. | University |
| 2013 | Engineering Design [BDA40203], Sesi 2013/2014 Semester 1 Seksyen 3-4, Universiti Tun Hussein Onn Malaysia, 2013. | University |
| 2012 | Engineering Design [BDA40203], Sesi 2011/2012 Semester 2 Seksyen 13-14, Universiti Tun Hussein Onn Malaysia, 2012. | University |
| 2012 | Seminar Rekabentuk [BDA40900], Sesi 2011/2012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012. | University |
| 2012 | Engineering Design [BDA40203], Sesi 2012/2013 Semester 1 Seksyen 1-2, Universiti Tun Hussein Onn Malaysia, 2012. | University |
| 2011 | Seminar Rekabentuk [BDA40900], Sesi 2011/2012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011. | University |
| 2011 | Engineering Design [BDA40203], Sesi 2011/2012 Semester 1 Seksyen 3-7, Universiti Tun Hussein Onn Malaysia, 2011. | University |
| 2011 | Final Project [FDR40602], Program INSEP Sesi 2011, Universiti Tun Hussein Onn Malaysia, 2011. | National |
| 2011 | Design Process [FDR40202], Program INSEP Sesi 2011, Universiti Tun Hussein Onn Malaysia, 2011. | National |
| 2007 | Rekabentuk Kejuruteraan [DDA3063], Sesi 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009. | University |
| 2007 | Rekabentuk Kejuruteraan Mekanikal 2 [BDA4023], Sesi 20072008 Semester 1, Universiti Tun Hussein Onn Malaysia, 2007. | University |
| 2007 | Rekabentuk Kejuruteraan Mekanikal 2 [BDA4023], Sesi 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007. | University |
| 2007 | Kejuruteraan Rekabentuk 2 [BTM3043], Sesi 20062007 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007. | University |
| 2006 | Kejuruteraan Rekabentuk 2 [BTM3043], Sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006. | University |
| 2006 | Rekabentuk Kejuruteraan Mekanikal 2 [BKM4313], Sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006. | University |
Research Grants And Contracts
Publications
| Book |
|---|
| Amir Khalid, Nik Hisyamudin Muhd Nor, Bukhari Manshoor, Saddah Ramli (2018) Research And Innovation : Smk Seri Kenangan Segamat Johor, UTHM , 1, ISBN:9789672183204 |
| General Publications |
| Nik Hisyamudin Muhd Nor, Abdul Rahman Ahmad, Nor Azizi Yusoff, Erween A. Rahim, Aida Mustapha, Mohd Azlis Sani Md Jalil, Kairunesa Isa (2017) Laporan Teknikal Petunjuk Prestasi Utama Yayasan Pengerang 2018-2022, UTHM , -, ISBN:- |
| Nik Hisyamudin Muhd Nor, Mohd Azwir Azlan (2017) Technical Report: Intake Manifold Of Fuel Gain Kit (Fgk), UTHM , 1, ISBN:- |
| Nik Hisyamudin Muhd Nor, Nor Azizi Yusof, Mohd Azwir Azlan, Sia Chee Kiong, Al Emran Ismail, Mohd Fahrul Hassan, Sallehuddin Shah Ayop (2017) Yjack Validation Test Program - Finite Element Modeling , UTHM , 1, ISBN:- |
| Nor Azizi Yusof, Sallehuddin Shah Ayop, Nik Hisyamudin Muhd Nor, Mohd Azwir Azlan, Sia Chee Kiong, Al Emran Ismail, Mohd Fahrul Hassan (2017) Yjack Validation Test Program - Structural Laboratory Tests , - , 1, ISBN:- |
| Nik Hisyamudin Bin Muhd Nor, Mohd Azwir Bin Azlan, Sia Chee Kiong, Ashari Bin Kasmin, Mohd Faizal Bin Mohideen Batcha, Shazarel Bin Shamsudin, Fazlannuddin Hanur Bin Harith (2011) Laporan Teknikal Ujian Kefungsian Produk Travelling Stove, UTHM , 1, ISBN:- |
| Journal |
| Ahmad, Md Fauzi; Ishak, Mohd Hafizal; Hamid, Nor Aziati Binti Abdul; Rasi, Raja Zuraidah Raja Mohd; Nor, Nik Hisyamudin Muhd (2018) Green Factory: Is It Improving Environmental Burden? Survey Result In Malaysia, ADVANCED SCIENCE LETTERS, Igenta Connect , 6, 4652, ISSN:19366612 |
| O.L.C. Narong, C.K. Sia , S.K. Yee, P. Ong, A. Zainudin , N.H.M. Nor , M.F. Hassan (2018) Optimisation Of Emi Shielding Effectiveness: Mechanical And Physical Performance Of Mortar Containing Pofa For Plaster Work Using Taguchi Grey Method, CONSTRUCTION AND BUILDING MATERIAL , Elsevier Ltd , 7, 509, ISSN:09500618 |
| Narong Oh Lai Ching, Chee Kiong Sia, See Khee Yee, Pauline Ong, Azlan Zainudin, Nik Hisyamudin Muhd Nor, Mohd Fahrul Hassan (2018) Taguchi Design And Flower Pollination Algorithm Application To Optimize The Emi Shielding Of Plaster Mortar Containing Palm Oil Fuel Ash, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 7, 93, ISSN:2229838X |
| Md Fauzi Ahmad, Jessica Chan Siew Yin, Nik Hisyamudin Muhd Nor, Chan Shiau Wei, Norhadilah Abdul Hamid, Ahmad Nur Aizat Ahmad, Nor Aida Abdul Rahman, Mohd Nasrun Mohd Nawi (2018) The Impact Of Tqm Tools And Organisation Performance In Malaysia Small And Medium Enterprise (Smes): A Survey Result, INTERNATIONAL JOURNAL OF SUPPLY CHAIN MANAGEMENT, ExcelingTech Publishers , 3, 101, ISSN:20513771 |
| Fariza Mohamad, Shinya Sugiyama, Zamzuri Mohd Zai, Nik Hisyamudin Muhd Nor, Junji Sasano, Tsutomu Shinagawa, Seiji Watase, and Masanobu Izaki (2017) Effect Of Light Intensity On The Light-Assisted Electrochemical Construction Of (0001) Zno (111)Cu2o Heterostructure, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, American scientific publisher , 12, 12798, ISSN:15334880 |
| Al Emran Ismail, Fazimah Mat Noor, Zaleha Mohamad, Mohd Amran Madlan, M. Zulafif Rahim, M. Rasidi Ibrahim, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan, Nik Hisyamudin Muhd Nor (2017) Effect Of Triggering Angles On The Crushing Mechanisms Of Hybrid Woven Kenaf/Aluminum Hollow Cylinders, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 12, 012034, ISSN:17426588 |
| Mohd Noor, A.M., Nik Hisyamudin Muhd Nor, Yokoyama, S. (2017) Solubility Of Nitrogen Gas Into Molten Copper At Temperature Range Of 1,993 K To 2,443 K, HIGH TEMPERATURE MATERIALS AND PROCESSES, DE GRUYTER , 2, 1035, ISSN:21910324 |
| Mohd Fahrul Hassan, Muhamad Zameri Mat Saman, Salwa Mahmood, Nik Hisyamudin Muhd Nor & Mohd Nasrull Abdol Rahman (2017) Sustainability Assesment Methodology In Product Design: A Review And Directions For Future Research, JURNAL TEKNOLOGI, PENERBIT UNIVERSITI TEKNOLOGI MALAYSIA , 1, 37, ISSN:21803722 |
| Fariza binti Mohamad, Nabiah binti Zinal, Lau Kae Lih, Nik Hisyamudin bin Muhd Nor, Masanobu Izaki (2017) The Effect Of Ph Solution On Electrodeposit-N-Cu2o Thin Film, JOURNAL OF TELECOMMUNICATION, ELECTRONIC AND COMPUTER ENGINEERING, Universiti Teknikal Malaysia Melaka , 4, 7, ISSN:21801843 |
| Md Fauzi Ahmad, Neo Yeong Ting, Nik Hisyamudin Muhd Nor, Chan Shiau Wei, Mohd Fahrul Hassan, Nor Aziati Abdul Hamid (2017) Total Quality Management Practices In Malaysia Healthcare Industry: A Survey Result, INTERNATIONAL JOURNAL OF SUPPLY CHAIN MANAGEMENT, ExcelingTech , 2, 332, ISSN:20513771 |
| Nik Hisyamudin Muhd Nor (2016) Carbon Sequestration And Carbon Capture And Storage (Ccs) In Southeast Asia, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing , 7, 1, ISSN:1742-6596 |
| Nik Hisyamudin Muhd Nor, Siti Norhana Selamat, Muhammad Hanif Abd Rashid, Mohd Fauzi Ahmad, Saifulnizan Jamian, Sia Chee Kiong, Mohd Fahrul Hassan, Fariza Mohamad, Seiji Yokoyama (2016) Carbon Sequestration And Carbon Capture And Storage (Ccs) In Southeast Asia , JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing Ltd , 1, 1( 012010), ISSN:17426588 |
| Mohd Faiz Mokhtar, Badrul Omar and Nik Hisyamudin Muhd Nor (2016) Development Of Score Metric For Supply Chain Sustainability In Design Phase, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 6, 5489, ISSN:1819-6608 |
| Nik Hisyamudin Muhd Nor, Siti Norhana Selamat, Muhammad Hanif Abd Rashid, Mohd Fauzi Ahmad, Saifulnizan Jamian, Sia Chee Kiong, Mohd Fahrul Hassan, Fariza Mohamad, Seiji Yokoyama (2016) Dissolution Behaviour Of Hazardous Materials From Steel Slag With Wet Grinding Method, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing Ltd , 7, 1, ISSN:17426588 |
| Fariza Mohamad, Shinya Sugiyama, Zamzuri Mohd Zain, Nik Hisyamudin Muhd Nor,Junji Sasano, Tsutomu Shinagawa, Seiji Watase, and Masanobu Izaki (2016) Effect Of Light Intensity On The Light-Assisted Electrochemical Construction Of (0001)-Zno/(111)-Cu2o Heterostructure, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, American Scientific Publishers , 12798, ISSN:1533-4880 |
| Saifulnizan Jamian, Siti Norain Ayob, Mohamad Rusydi Zainal Abidin, Nik Hisyamudin Muhd Nor (2016) Fabrication Of Functionally Graded Natural Fibre/Epoxy Cylinder Using Centrifugal Casting Method, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 2, 2327, ISSN:1819-6608 |
| Nur Fadzhila Mahamad Zulkifli, Shafizan Jaibee, Mohd Hafiz Burhan, Fariza Mohamad, Al Emran Ismail, Sia Chee Kiong, Zulkifli Ahmad, Seiji Yokoyama and Nik Hisyamudin Muhd Nor (2016) Feasibility Study Of Pcb Mobiles Phones And Recycling Through Manual Dismantling And Hydro Metallurgical Method, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN). , 9, 7401, ISSN:18196608 |
| Nik Hisyamudin Muhd Nor (2016) Feasibility Study Of Pcb Mobiles Phones And Recycling Through Manual Dismantling And Hydrometallurgical Method, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7401, ISSN:1819-6608 |
| Shafizan Jaibee, Nik Hisyamudin Muhd Nor, Abd Khalil Abd Rahim, Fariza Mohammad et. al (2016) Feasibility Study Of Waste Printed Circuit Board Recycling Through Manual Dismantling And Hydrometallurgical Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 2, 2332, ISSN:1819-6608 |
| Mohd Fahrul Hassan, Muhammad Zekri Safiee, Nik Hisyamudin Muhd Nor, Mohd Nasrull Abdol Rahman, Ibrahim Masood (2016) Integration Of Ecqfd And Weighted Decision Matrix For Selection Of Eco-Design Alternatives, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING IJMME-IJENS, IJENS , 27, ISSN:2077-124X |
| Hiung Yin Yap, Chin Fhong Soon, Nik Hisyamudin Muhd Nor, Muhammad Sharil Saripan, Mohd Zainizan Sahdan, Kian Sek Tee (2016) Synthesis And Characterization Of Polymeric Microspheres By Using Suspension Polymerization Technique, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 10, 11808, ISSN:18196608 |
| Nik Hisyamudin Muhd Nor (2015) Mediator Effect Of Statistical Process Control Between Total Quality Management (Tqm) And Business Performance In Malaysian Automotive Industry, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Science , 9, 012067, ISSN:17578981 |
| Prosiding / Seminar |
| A.E Ismail, M.Q Abdul Rahman, M.Z Mohd Ghazali, M. Zulafif Rahim, M. Rasidi Ibrahim, Mohd Fahrul Hassan, Nik Hisyamudin Muhd Nor, A.M.T Ariffin, Muhamad Zaini Yunos (2017) Combined Mode I Stress Intensity Factors Of Slanted Cracks, INSTITUTE OF PHYSICS PUBLISHING , 012011, ISBN:17578981 |
| MD FAUZI AHMAD, NEO YEONG TING, NIK HISYAMUDIN MUHD NOR, CHAN SHIAU WEI, MOHD FAHRUL HASSAN, NOR AZIATI ABDUL HAMID (2017) Comparative Study Of Lean Practices Between Japanese And Malaysia Automotive Service Centres, AMERICAN INSTITUTE OF PHYSICS INC. , 020022, ISBN:0094243X |
| MD FAUZI AHMAD, TOH LI YAN ,CHAN SHIAU WEI, AHMAD NUR AIZAT AHMAD, RAJA ZURAIDAH RAJA MOHD RASI , NOR AIDA ABDUL RAHMAN, NIK HISYAMUDIN MUHD NOR, MOHD FAHRUL HASSAN, FATAN ADIBAH HASHIM (2017) Continuous Improvement And Its Barriers In Electrical And Electronic Industry, EDP SCIENCES , 00045, ISBN:2261236X |
| Fariza binti Mohamad, Cheong Kah Hao, Nabiah binti Zinal, Nurliyana binti Mohamad Arifin, Asyikin Sasha binti Mohd Hanif, Nik Hisyamudin bin Muhd Nor, Masanobu Izaki (2017) Cyclic Voltammetry Measurement For N-Type Cu2o Thin Film Using Copper Sulphate-Based Solution, Trans Tech Publications , 119, ISBN:10139826 |
| S. Jamian, N.A. Nik Mohamed, A.K.A Mohd Ihsan, A.E Ismail, M.K. Mohd Nor, K.A. Kamarudin, N. H. Muhd Nor (2017) Deflection Of Elastic Beam With Sma Wires Eccentrically Inserted, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X |
| MOHD HAFIZ BURHAN, NIK HISYAMUDIN MUHD NOR, MOGAN YARWINDRAN, MUSTAFFA IBRAHIM, MOHD FAHRUL HASSAN, MOHD AZWIR AZLAN, FAIZ MOHD TURAN, KARTINA JOHAN (2017) Designing An Orthotic Insole By Using Kinect Xbox Gaming Sensor Scanner And Computer Aided Engineering Software, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| Faiz Mohd Turan, Kartina Johan, Nur Soliha Sahimi and Nik Hisyamudin Muhd Nor (2017) Development Of Integrated Assessment System For Underground Power Cable Performance: A Case Study, INSTITUTE OF PHYSICS PUBLISHING , 012020-1, ISBN:1757899X |
| SELAMAT S.N., NIK HISYAMUDIN MUHD NOR, MOHAMAD F., ABD RASHID M.H., ABD RAHIM A.K., ISMAIL A.E., MOHAMMAD ZAIN M.Z., YOKOYAMA S. (2017) Effect Of Pressure On The Co2 Absorption Into Ladle Furnace Slag, TRANS TECH PUBLICATIONS LTD , 508, ISBN:16629752 |
| Maximus Kohnizio Mahli, Saifulnizan Jamian, Al Emran Ismail, Nik Hisyamudin, Muhd Nor, Mohd Khir Mohd Nor, Kamarul Azhar Kamarudin (2017) Effect Of Rotating Mold Speed On Microstructure Of Al Lm6 Hollow Cylinder Fabricated Using Centrifugal Method, IOP Publishing , 1, ISBN:17426588 |
| Nurliyana binti Mohamad Arifin, Fariza Mohamad, Chia Hui Ling, Nabiah binti Zinal, Asyikin Sasha binti Mohd Hanif, Nik Hisyamudin bin Muhd Nor and Masanobu Izaki (2017) Growth Mechanism Of Copper Oxide Fabricated By Potentiostatic Electrodeposition Method, Trans Tech Publication , 303, ISBN:02555476 |
| Al Emran Ismail, Mohd Zubir Mohd Ghazali and Nik Hisyamudin Muhd Nor (2017) Mode I Stress Intensity Factors Of Slanted Cracks In Plates, Institute of Physics Publishing , 012008, ISBN:17578981 |
| O L C Narong, C K Sia , S K Yee, P Ong , A Zainudin, N H M Nor and N A Kasim (2017) Optimization Of The Emi Shielding Effectiveness Of Fine And Ultrafine Pofa Powder Mix With Opc Powder Using Flower Pollination Algorithm, IOP PUBLISHING LTD. , 12, ISBN:17578981 |
| Tang Tsz Loong, Saifulnizan Jamian, Al Emran Ismail, Nik Hisyammudin Muhd Nur, Yoshimi Watanabe (2017) Residual Stresses In Shape Memory Alloy Fiber Reinforced Aluminium Matrix Composite, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| Al Emran Ismail, Kamarul Azhar Kamarudin, Nik Hisyamudin Muhd Nor (2017) Stress Intensity Factors Of Slanted Cracks In Bi-Material Plates, INSTITUTE OF PHYSICS PUBLISHING , 012043, ISBN:17426588 |
| A Zainudin, C K Sia, P Ong, O L C Narong and N H M Nor (2017) Taguchi Design And Flower Pollination Algorithm Application To Optimize The Shrinkage Of Triaxial Porcelain Containing Palm Oil Fuel Ash, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| MD FAUZI AHMAD, JESSICA CHAN SIEW YIN, CHAN SHIAU WEI, NOR AIDA ABDUL RAHMAN, NIK HISYAMUDIN MUHD NOR, MOHD FAHRUL HASSAN AND FATAN ADIBAH HASHIM (2017) The Relationship Between Tqm Practices With Tqm Tools And Techniques In Small And Medium Enterprise (Smes), EDP SCIENCES , 0044, ISBN:2261236X |
| MD FAUZI AHMAD, PHOI SOO NEE, NIK HISYAMUDIN MUHD NOR, CHAN SHIAU WEI, MOHD FAHRUL HASSAN, NOR AZIATI ABDUL HAMID (2017) Total Quality Management Practices In Malaysia Healthcare Industry, AMERICAN INSTITUTE OF PHYSICS INC. , 020021, ISBN:0094243X |
| A.E Ismail (2016) Effect Of Hybridized Fiber Wrapped Around The Aluminum Tubes On The Crushing Performances, IOP Publishing , 012019 , ISBN:1757-899X |
| AE Ismail, SH Masran, S Jamian, KA Kamarudin, MK Mohd Nor, NH Muhd Nor, AL Mohd Tobi and MK Awang (2016) Fracture Toughness Of Woven Kenaf Fibre Reinforced Composites, IOP Publishing , 0120020 , ISBN:1757-899X |
| A. E. Ismail, A. L. M. Tobi and N. H. M. Nor (2015) Stress Intensity Factors Of Slanted Cracks In Round Bars Subjected To Mode I Tension Loading, AIP publisher , - , ISBN:978-0-7354-1304 |
| A.E Ismail, M.H Zainulabidin, Roslan, M.N, A.L Mohd Tobi and N.H.M Nor (2014) Effect Of Velocity On The Impact Resistance Of Woven Jute Fiber Reinforced Composites, TRANS TECH PUBLICATIONS LTD. , 1277, ISBN:9783037859339 |
| M. R. Zainal Abidin, S. Jamian , N. H. Muhd Nor (2014) Prediction Of Energy Absorption Of Al-Based Fgm Crash Box Under Quasi-Static And Dynamic Loading, TRANS TECH PUBLICATIONS LTD , 557, ISBN:9783038352785 |
| Nik Hisyamudin Bin Muhd Nor (2012) Dissolution Behavior Of Hazardous Materials From Eaf Slag In Water With Wet Grinding Method , UTHM |
| Nik Hisyamudin Bin Muhd Nor (2012) Implementation Of Rural Development Programme: How Could Ihl Student Works Effectively With The Public Community And Governmental Bodies?, Asia Engage |
| Nik Hisyamudin Bin Muhd Nor (2012) Structuring And Managing An Engineering Design Education Towards The Effectiveness Of Outcome Based Education System, International Association of Computer Science and Information Technology Press (IACSIT Press) |
| Nik Hisyamudin Bin Muhd Nor (2011) Compressive Strength Of Mortar Prepared By The Wet Ground Carbonated Eaf Slag |
| Nik Hisyamudin Bin Muhd Nor (2011) Dissolution Behavior Of Eaf Dust Into Carbonic Acid Solution |
| Nik Hisyamudin Bin Muhd Nor (2011) Effect Of Type Of Gas On The Dissolution Of Eaf Stainless Steel Oxidizing Slag |
| Nik Hisyamudin Bin Muhd Nor (2010) Behavior Of Adsorption Of Co2 Onto Iron Powder During Dry Grinding |
| Nik Hisyamudin Bin Muhd Nor (2010) Dissolution Of Chromium And Zinc From Eaf Slags In Water With Wet Grinding Method |
| Nik Hisyamudin Bin Muhd Nor (2010) Enhancement Of Co2 Absorption In Eaf Slag By Using Stainless Steel Ball As Grinding Media |
| Nik Hisyamudin Bin Muhd Nor (2010) Reaction Between Carbon Dioxide And Mechanically Activated Metal Powder |
| Nik Hisyamudin Bin Muhd Nor (2010) Storage Of Co2 In Low Al2o3 Eaf Oxidizing Slag By Grinding With Vibration Mill |
| Nik Hisyamudin Bin Muhd Nor (2009) Absorption Of Co2 In Eaf Reducing Slag From Stainless Steelmaking Process Under Wet Grinding |
| Nik Hisyamudin Bin Muhd Nor (2009) Absorption Of Co2 In Electronic Arc Furnace Oxidizing Slag Discharged From Stainless Steel Making Process Under Wet Grinding |
| Nik Hisyamudin Bin Muhd Nor (2009) Absorption Of Co2 In Electronic Arc Oxidizing Slag Discharged From Stainless Steel Making Process Under Wet Grinding |
| Nik Hisyamudin Bin Muhd Nor (2009) Absorption Of Co2 In Electronic Arc Reducing Slag Discharged From Stainless Steel Making Process Under Wet Grinding |
| Nik Hisyamudin Bin Muhd Nor (2009) Behavior Of Co2 Absorption In Low Al2o3 Eaf Oxidizing Slag From Stainless Steelmaking Process Under Wet Grinding |
| Nik Hisyamudin Bin Muhd Nor (2009) Elution Behavior Of Eaf Oxidizing Slag In Carbonic Acid Solution |
| Nik Hisyamudin Bin Muhd Nor (2009) Utilization Of Eaf Reducing Slag From Stainless Steelmaking Process As A Sorbent For Co2 |
| Nik Hisyamudin Bin Muhd Nor (2008) Co2 Absorption Into Aod Slag Under Wet Grinding |
| Nik Hisyamudin Bin Muhd Nor (2008) Enhancement Of Reaction Between Co2 And Electric Arc Furnace Oxidizing Slag By Grinding |
| Nik Hisyamudin Bin Muhd Nor (2003) Mechanochemical Reaction Between Ca Contained Materials And Co2 (Japanese) |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2016 | Lead Consultant in Design Failure Mode and Effects Analysis (DFMEA) project, APT Touch Sdn. Bhd., 2016. | Private |
| 2016 | Lead Consultant in International Engineering Research and Innovation Symposium 2016 (IRIS) project, UTHM Commercial Sdn. Bhd., 2016. | Private |
| 2016 | Lead Consultant in Design of Two Layer Packaging System project, Rafiq Enterprise, 2016. | Private |
| 2016 | Lead Consultant in Design of Spiral Curry Puff Processing Machine project, Seven Mega Memory Enterprise, 2016. | Private |
| 2016 | Lead Consultant in Design of Honey Filling and Cappping System project, Kruss Success Enterprise Sdn. Bhd., 2016. | Private |
| 2016 | Lead Consultant in Product Innovation and Development project, Sekolah Menengah Sains Muar, 2016. | Government |
| 2016 | Consultative Panel in YJACK Structural Analaysis and Simulation project, YJACK Technology Sdn. Bhd., 2016. | Private |
| 2015 | Innovation Consultant for Sekolah Menengah Sains Muar in Innovation Workshop 2015, Sekolah Menengah Sains Muar, 2015. | University |
| 2015 | Innovation Consultant for Sekolah Menengah Kebangsaan Seri Kenangan Segamat Innovation Workshop, Sekolah Menengah Kebangsaan Seri Kenangan Segamat, 2015. | Government |
| 2013 | Consultive Panel for HM Food Industries, Development of Sprinkler System for Kueh Koye, 2013. | Private |
| 2013 | Consultive Panel for Bumimas Interlink, Improvement of Kerisik Packaging Machine, 2013. | Private |
| 2013 | Creativity & Innovation Coach, Sekolah Menengah Seri Kenangan Segamat (Kluster Inovasi), 2013. | Government |
| 2013 | Consultive Panel for Perusahaan Mi Karjo, Development of Noodle Packaging Machine, 2013. | Private |
| 2013 | Consultive Panel for Product Development - Grated Coconut Dryer, Bumimas Interlink, 2013. | Private |
| 2012 | Consultive Panel for TNB Batu Pahat, Analysis of Wire Support, 2012. | Private |
| 2012 | Consultive Panel for Sugar Cane World Sdn Bhd, Development of New Sugar Cane Extractor Machine, 2012. | Private |
| 2012 | Consultive panel for Mohaz Engineering Sdn Bhd, Analysis of A-Frame Structure for the Use at Oil Platform, 2012. | Private |
| 2011 | Product Functional Test of Travelling Stove, Sekolah Menengah Vokasional Segamat, Jun 2011. | Government |
| 2011 | Consultive panel for TNB Mobile Sub-Station, Mohaz Engineering Sdn Bhd, Jul 2011. | Private |
Supervision
| Year | Description | Role |
|---|---|---|
| 2016 | Referee, Career and Counselling Innovation Competition, SM Sains Muar, 2016. | Referee |
| 2016 | Reviewer for International Engineering Research and Innovation Symposium 2016 (IRIS2016), 2016. | Assessor |
| 2016 | Supervisor, Fuad Izrulnizam Bin Atan, Design of Waste Shopping Plastic Storage Machine, FYP, UTHM, 2016. | Supervisor |
| 2016 | Referee, Invention, Innovation & Design Exposition (IIDEX 2016), UiTM Shah Alam, Sep 2016. | Referee |
| 2015 | Supervisor, Muhamad Khalif Ikhwan Bin Mohd Kamaruddin, Effect Of Pressure On Dissolution Behaviour Of Slag, FYP, UTHM, 2015. | Supervisor |
| 2015 | Supervisor, Muhd Akmal Faidhy Bin Daud, Investigation on Innovation Strategy in Institute of Higher Education Malaysia, FYP, UTHM, 2015. | Supervisor |
| 2015 | Supervisor, Siti Norhana Binti Selamat, Design of CO2 absorber tank, FYP, UTHM, 2015. | Supervisor |
| 2015 | Supervisor, Siti Hajar Binti Kassim, The study of absorption of CO2 into steel slag, FYP, UTHM, 2015. | Supervisor |
| 2015 | Reviewer for Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET2015), 2015. | Assessor |
| 2015 | Reviewer for International Engineering Research and Innovation Symposium 2015 (IRIS2015), 2015. | Assessor |
| 2015 | Supervisor, Nurul Amira Inti Nordin, Effect Of Grinding To The Dissolution Behaviour Of Precious And Hazardous Metals In E-Waste, FYP, UTHM, 2015. | Supervisor |
| 2014 | Supervisor, Mohamad Firdaus bin Ismail, Recycle of waste motor using integration of grinding and hydrometallurgical method, FYP, UTHM, 2014. | Supervisor |
| 2014 | External examiner for M. Sc.Viva UNiMAP, A Study on Corrosion Resistance of Sodium Metavanadate Coated AZ91D Magnesium Alloyby Anodizing Technique, Dec 2014. | External Examiner |
| 2014 | Examiner for Master Project I & II, Master in Mechanical Engineering (Course Work) UTHM, Quasiturbine Rotor Development Optimization, Sem 2 2013/2014. | Examiner |
| 2014 | Examiner for Master Project I & II, Master in Mechanical Engineering (Course Work) UTHM, Optimal Decision Making with Analytic Hierarchy Process for Sustainability in Screw Manufacturing, Sem 1 2014/2015. | Examiner |
| 2014 | Reviewer for International Integrated Engineering Summit 2014 (IIES2014), 2014. | Assessor |
| 2014 | Supervisor, Muhamad Azam Bin Ibrahim, Coconut Processing Machine; Scalping mechanism and integrated of all system, FYP, UTHM, 2014. | Supervisor |
| 2014 | Supervisor, Muhamad Shafiq Bin Muhamad Dahlan, Sugarcane Bagasse fiber hammer mill machine, FYP, UTHM, 2014. | Supervisor |
| 2014 | Supervisor, Mustaqim Ahmad, Sugar cane peeling machine, FYP, UTHM, 2014. | Supervisor |
| 2014 | Supervisor, Mahfuz bin Mazlan, Coconut De-shelling machine, FYP, UTHM, 2014. | Supervisor |
| 2014 | Reviewer for International Conference on Mechanical and Manufacturing Engineering 2014 (ICME2014), 2014. | Assessor |
| 2014 | Supervisor, Muhammad Saufi Bin Barlim , Design Of Vegetable Processor: Peeling And Slicing, FYP, UTHM, 2014. | Supervisor |
| 2014 | Supervisor, Muhammad Redzuan Bin Azizul, Kesan Kebuk Tekanan Tinggi Terhadap Kadar Larutan Bahan Logam Berbahaya Daripada 'E-Waste' (Komputer), FYP, UTHM, 2014. | Supervisor |
| 2014 | Examiner for Colloquium I Post Graduate Studies, Master and PHD in Mechanical Engineering (Research) UTHM, Product Design End of Life (EOL) Evaluation Using Supply Chain Recyclability Index, Sem 2 2013/2014. | Examiner |
| 2014 | Supervisor, Nurfadzhila Bt Mahamad Zulkifli, Kadar Larutan Bahan logam berbahaya daripada telefon bimbit dan bateri menggunakan kaedah hydrometalurgi, FYP, UTHM, 2014. | Supervisor |
| 2014 | Supervisor, Muhd Aizuddin B Dahlam, Rekabentuk Pemotong Gula-Gula Kelapa, FYP, UTHM, 2014. | Supervisor |
| 2014 | Supervisor, Tengku Noor Aznan Tengku Norman, Study on design and innovation issues among small and medium industries (SMI) in Batu Pahat, FYP, UTHM, 2014. | Supervisor |
| 2014 | Referee, InnoTex 2014, Politeknik Kota Bharu, Sep 2014. | Referee |
| 2013 | Supervisor, Femar Bin Abdul Taufil, Design of packaging machine for usage of solid product, FYP, UTHM, 2013. | Supervisor |
| 2013 | Supervisor, Shafizan B. Jaibee, Developing sustainable recovery method of valueble and hazardous metals from e-waste; in the case of personal computer board, FYP, UTHM, 2013. | Supervisor |
| 2013 | Supervisor, Nur Syazwana Binti Mat Puat, Development of design process determination tools based on the utilization by industrial companies in Malaysia, FYP, UTHM, 2013. | Supervisor |
| 2013 | Supervisor, Loo Soon Keat, Design of packaging machine for usage of semi liquid product, FYP, UTHM, 2013. | Supervisor |
| 2013 | Examiner for Colloquium Post Graduate Studies, Master and PHD in Mechanical Engineering (Research) UTHM, Improving Mouthguard Design to Enhance Physical Performance of Athletes, Sem 1 2013/2014. | Examiner |
| 2013 | Editorial Board, National Forum and Exhibition on Engineering Design (NFEED) 2013, 2013. | Examiner |
| 2013 | External examiner for M. Sc.Viva UNiMAP, Microstructure and Corrosion Protection of Magnesium Alloy in Manufacturing Application, Feb 2013. | External Examiner |
| 2013 | External examiner for M. Sc.Viva UNiMAP, Characterization of Corrosion Studies of Rare Earth (REE) Based Anodizing Coating on AZ91D Magnesium Alloy, Dec 2013. | External Examiner |
| 2013 | Referee, Sains and Innovation Competition 2013, MRSM Batu Pahat, Aug 2013. | Referee |
| 2013 | Section Editor, International Conference on Mechanical and Manufacturing Engineering 2013 (ICME2013), 2013. | Examiner |
| 2013 | Reviewer, Int. Conference on Mechanical and Manufacturing Engineering 2013 (ICME2013), 2013. | Assessor |
| 2013 | Technical Program Committee Chair, International Conference on Mechanical Structures and Smart Materials 2013, 2013. | Assessor |
| 2012 | Supervisor, Shahrul Nazri Bin Jamaris, Improvement of Rotary Dryer for Virgin Coconut, FYP, UTHM, 2012. | Supervisor |
| 2012 | Supervisor, Mohd Faizal Bin Jani Basha, Development of Diffuser and Dryer for Black Pepper, FYP, UTHM, 2012. | Supervisor |
| 2012 | Supervisor, Thirumoothy S/O Nathan, Developing sustainable recovery method of valueble and hazardous metals from E-waste, FYP, UTHM, 2012. | Supervisor |
| 2012 | Supervisor, Mohd Ridhwan Bin Sulaiman, Mesin parut kelapa dan santan, FYP, UTHM, 2012. | Supervisor |
| 2012 | Examiner for Colloquium Post Graduate Studies 2011 (Research) UTHM, In Situ Design Evaluation for Product Life Cycle Management, Sem 2 2011/2012. | Examiner |
| 2012 | Reviewer, International Conference on Mechanical and Manufacturing Engineering 2012 (ICME2012), 2012. | Assessor |
| 2012 | Co-supervisor, Mohd Amin Hafifi Bin Abdul Halim, Design and Development of Biomass Feeding System For Fluidized Bed Combustor, FYP, UTHM, 2012. | Supervisor |
| 2012 | Reviewer for Knowledge Management Int. Conference 2012 (KMICe2012), 2012. | Assessor |
| 2011 | Referee, Mechanical Engineering Innovation and Design Exhibition 2011, UTHM. | Referee |
| 2011 | Examiner for Colloquium Post Graduate Studies 2011 (Research) UTHM, In Situ Design Evaluation for Product Life Cycle Management, Sem 2 2010/2011. | Examiner |
| 2011 | Reviewer for Int. Journal of Integrated Engineering, University Tun Hussein Onn Malaysia, 2011. | Assessor |
| 2011 | Reviewer for World Academy of Science, Engineering & Technology (WASET), 2011. | Assessor |
| 2011 | Reviewer for International Journal of Engineering - Computer Science Journal (IJE-SC), 2011. | Assessor |
| 2011 | Reviewer for International Conference on Applications and Design in Mechanical Engineering (ICADME 2012), 2011. | Assessor |
| 2011 | Khairul Idham Bin Mohsin, Survey On The Utilisation Of Product Development Tools, Methods And Design Processes Among Industrial Company In Malaysia, FYP, UTHM, 2011. | Supervisor |
| 2011 | Mohd Faiz Bin Rosmin, Development And Fabrication Of Greeting Card Sticking Machine, FYP, UTHM, 2011. | Supervisor |
| 2011 | Mohd Haris Bin Abd Kadir, Dissolution Behaviour Of Industrial Slag Into Pure Water, River And Seawater, FYP, UTHM, 2011. | Supervisor |
| 2011 | Supervisor, Mohd Shafiq Bin Alip, Development And Fabrication Of New Innovated Sugar Cane Machine, FYP, UTHM, 2011. | Supervisor |
| 2011 | Supervisor, Johnydy Bin Jivet, Development of Ball Mill Grinding Machine For The Utilization In CCS Technology, FYP, UTHM, 2011. | Supervisor |
| 2011 | Supervisor, Mohamad Hanis Bin Idris,Development And Fabrication Of Palm Fruit Cutting Machine, FYP, UTHM, 2011. | Supervisor |
| 2010 | Reviewer for Journal of Cleaner Production, Elsevier, ISSN 09596526, 2010. | Assessor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2014 | Coordinator, Enhancement of Graduate Employability Through the Professional Certification ? Certification of Catia and NX Designer, Graduate Employability Fund MOHE, RM62,100, 2014. | University |
| 2014 | Coordinator, Enhancement of Graduate Employability Through the Professional Certification ? Certification of Solidworks Professional, Graduate Employability Fund MOHE, RM225,000, 2014. | University |
| 2013 | Advisor, 4th Mechanical Product Innovation Exhibition (InnovatorsX4), 2013. | University |
| 2013 | Coordinator and Presenter, MS Excel Course for FKMP Final Year Students, Feb 2013. | University |
| 2013 | Chairperson, Research Colloquium: Research Supervision Through Implementation of Kouza System in Japan, March 2013. | University |
| 2013 | Coordinator, Visit from Toyohashi University of Technology Delegation, March 2012. | University |
| 2013 | Committee Member, Webometrics UTHM, 2013. | University |
| 2013 | Secretary, Kasih Ramadhan 2013, July 2013. | University |
| 2013 | Coordinator, Enhancement of Graduate Employability Through the Innovators Program, Graduate Employability Fund MOHE, RM173,000, 2013. | University |
| 2013 | Head of Registration Unit, National Forum and Exhibition on Engineering Design (NFEED) 2013, 2013. | National |
| 2013 | Vice Chairman, National Forum and Exhibition on Engineering Design (NFEED) 2013, 2013. | National |
| 2013 | Desk Officer, International Journal of Integrated Engineering - Mechanical Issue, 2013. | University |
| 2012 | Coordinator, FKMP Dean List Ceremony 2012, 2012. | University |
| 2012 | Associate Member, Design Society - a worldwide community (Scotland HQ), 2012. | International |
| 2012 | Deputy Secretary 2, 1st National Technological Exposition on Rural Innovation 2012, TechRural2012, 2012. | National |
| 2012 | Advisor, 3rd Mechanical Product Design Exhibition (DesignX3), 2012. | University |
| 2012 | Advisor, 2nd Mechanical Product Design Exhibition (DesignX2), 2012. | University |
| 2012 | Desk Officer, International Journal of Integrated Engineering - Mechanical Issue, 2012. | University |
| 2012 | Committee Member, Webometrics UTHM, 2012. | University |
| 2012 | Coordinator, Student Development Program (PROPEM) FKMP, 2012-2013. | University |
| 2012 | Presenter, Thesis Writing Technique for Undergraduate Student, Kolej Kediaman Taman Universiti UTHM, 2012. | University |
| 2012 | Senior Member, International Economics Development Research Center (IEDRC), 2012. | International |
| 2012 | Coordinator, FKMP Finishing School Industrial Talk Series, Sep-Dec 2012. | University |
| 2012 | Coordinator, PROPEM Talk Series 2012 - MyC Petronas Talk, 2012. | University |
| 2012 | Ahli, Kumpulan Inovatif dan Kreatif (KIK) FKMP, UTHM, 2012. | University |
| 2012 | Presenter, PROPEM Talk Series 2012 - Sharing Knowledge on Multi-Disciplinary International Issues, 2012. | University |
| 2012 | Coordinator, PROPEM Talk Series 2012 - Sharing Knowledge on Multi-Disciplinary International Issues, 2012. | University |
| 2012 | Coordinator, PROPEM Talk Series 2012 - Experience Sharing With UTHM International Students, 2012. | University |
| 2012 | Coordinator, Increase Student?s Graduate Employability Through the Implementation of Product Design with SMEs, Graduate Employability Fund MOHE, RM100,000, 2012. | University |
| 2011 | Advisor, Mechanical Engineering Innovation and Design Exhibition 2011, 2011. | University |
| 2011 | Organizing Committee, Solidworks Lets Go Design Skill Competition 2011, Southern Zone, Malaysia, 2011. | National |
| 2011 | Desk Officer, International Journal of Integrated Engineering - Mechanical Issue, 2011. | University |
| 2011 | Head of Sports and Recreation Unit, MechClub FKMP, 2011-2013. | University |
| 2011 | Deputy Chairman, MechClub FMKP, 2011-2013. | University |
| 2011 | Facilitator, Finishing School 2011, UTHM, 2011. | University |
| 2011 | Gotong-royong Sungai Bekok Bersama Pelajar Rekabentuk Kejuruteraan, Universiti Tun Hussein Onn Malaysia, 2011. | University |
| 2011 | Instructor, MS Excel - Easy Way to Create Graph, FKMP Staff, 2011. | University |
| 2011 | Promoter, UTHM (FKMP) Promoter at Johor Technical Matriculation Center, Pontian, 2011. | University |
| 2011 | Coordinator, International Day : World Day to Combat Desertification and Drought 2011, UTHM, 2011. | University |
| 2011 | Coordinator, Engineering Design Research Group (EDRG) Colloquium Series 2011, 2011. | University |
| 2010 | Member, Japan Society For Production Management (JSPM), 2010-2011. | International |
| 2008 | Student member, The Iron and Steel Institute of Japan (ISIJ), 2008-2011. | International |
| 2007 | Coordinator, Research Seminar on Bio-Diesel and High Temperature Materials by Dr. Puji Untoro (BATAN), UTHM, 2007. | University |
| 2007 | Coordinator for Batu Pahat Water Rocket Competition 2007, UTHM, 2007. | University |
| 2007 | Head of sponsorship unit for the International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) organized by FKMP, UTHM, 2007. | University |
| 2007 | Committee of Research and Publication FKMP, UTHM, 2007-2008. | University |
| 2007 | Committee of Bengkel Kecemerlangan Pelajar Baru FKMP 2007 , UTHM, 2007. | University |
| 2007 | Coordinator, Talk by Inviting Professor - Prof Dr Yoshiharu Mutoh (Nagaoka University, Japan), UTHM, 2007. | University |
| 2007 | Promotion Unit, Talk by Inviting Professor - Prof Dr Terrence Perera (Sheffield Hallam University, UK), UTHM, 2007. | University |
| 2007 | Graduate Member, Board of Engineer (BEM), 2007. | National |
| 2007 | Committee of Project and Laboratory FKMP, UTHM, 2007-2008. | University |
| 2007 | Committee of 5S FKMP, UTHM, 2007-2008. | University |
| 2007 | Committee of MechClub FKMP, UTHM, 2007-2008. | University |
| 2007 | Coordinator for FKMP Colloquium Series 2007, FKMP, 2007. | University |
| 2007 | Coordinator, Industrial and academic visit to PMSB, DRB-Hicom, Hicom Die-Casting, Polytechnic Singapore, UTHM, 2007. | University |
| 2007 | Coordinator, Research Seminar on Unmanned Aerial Vehicle (UAV) by Dipl. Ing. Endri Rachman (USM), UTHM, 2007. | University |
| 2007 | Presenter, FKMP Staffs MS Excel Short Course, FKMP UTHM, 2007. | University |
| 2006 | Coordinator, Seminar on Issue, Challenge and Future of Aeronautic Engineering in KUiTTHO by Prof Dr Ir Harijono Djojodiharjo (USM), KUiTTHO, 2006. | University |
| 2006 | Coordinator for FKMP Bowling Tournament 2006, FKMP, 2006. | University |
| 2006 | Coordinator for FKMP Soccer Tournament 2006, FKMP, 2006. | University |
| 2006 | Coordinator, Speech on the future usage of nuclear energy by Dr Asnatio Lasman (BAPATEN), UTHM, 2006. | University |
| 2005 | Coordinator, Production arrangement for export, special edition model, Perodua Manufacturing Sdn Bhd (PMSB), 2005-2006. | Private |
| 2004 | Coordinator, Plant shutdown, Perodua Manufacturing Sdn Bhd (PMSB), 2004-2006. | Private |
| 2004 | Coordinator, Downtime Management, Perodua Manufacturing Sdn Bhd (PMSB), 2004-2006. | Private |