Staff Profile
| Full Name | Dr. NORADILA BINTI ABDUL LATIF |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN MEKANIK (JKM) |
| Designation | DS51 - PENSYARAH |
|
KETUA PUSAT PUSAT PENYELIDIKAN PENCEGAHAN KEGAGALAN MEKANIKAL DAN KEBOLEHARAPAN (MPROVE) FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Field of Expertise
| Field Category (KPT) | |
|---|---|
| Field (KPT) | |
| Field of Specialization (KPT) |
Areas of Research Interest
| 1. | Fatigue and Fracture Mechanics |
| 2. | Failure Analysis |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2015 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIK DAN BAHAN | UNIVERSITI KEBANGSAAN MALAYSIA |
| 2010 | SARJANA KEJURUTERAAN (MEKANIKAL) | UNIVERSITI KEBANGSAAN MALAYSIA |
| 2008 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2005 | DIPLOMA KEJURUTERAAN MEKANIKAL | KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN |
Professional Appointments
| DS51 - Pensyarah |
Management Experience
| Date | Description |
|---|---|
| 01/02/2019 - 31/01/2021 | Ketua Pusat
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Penyelidikan Pencegahan Kegagalan Mekanikal dan Keboleharapan (MPROVE) |
| 01/01/2017 - 31/12/2018 | Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Structural Integrity and Monitoring Research Group |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 06/03/2009 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
| 16/03/2017 - 31/12/9999 | Microscopy Society Malaysia (MSM)
| Ahli | Kebangsaan |
| 16/07/2012 - 31/12/2012 | The Institution of Engineers, Malaysia (IEM)
| Ahli Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2018 | Engineering Laboratory II [BDA27301], Sesi 20182019 Semester 1, UTHM, 2018 | University |
| 2018 | Dynamics [BDA20103], Sesi 20182019 Semester 1, UTHM, 2018 | University |
| 2018 | Research Methodology [MDC10100], Sesi 2017/2018 Semester 2, UTHM, 2018 | University |
| 2018 | Industrial Training [BDA38004], Sesi 2017/2018 Semester 3, UTHM, 2018 | University |
| 2018 | Engineering Laboratory III [BDA27401], Sesi 20172018 Semester 2, UTHM, 2018 | University |
| 2018 | Dynamics [BDA20103], Sesi 20162017 Semester 2, UTHM, 2018 | University |
| 2017 | Research Methodology [MDC10100], Sesi 2016/2017 Semester 2, UTHM, 2017 | University |
| 2017 | Dynamics [BDA20103], Sesi 20162017 Semester 1, UTHM, 2017 | University |
| 2017 | Dynamics [BDA20103], Sesi 20162017 Semester 2, UTHM, 2017 | University |
| 2017 | Dynamics [BDA20103], Sesi 20172018 Semester 1, UTHM, 2017 | University |
| 2017 | Solid Mechanics 1 [BDA10903], Sesi 20162017 Semester 2, UTHM, 2017 | University |
| 2017 | Research Methodology [MDC10100], Sesi 2017/2018 Semester 1, UTHM, 2017 | University |
| 2016 | Mechanics of Machine [BDA20303], Sesi 20152016 Semester 2 20152016, UTHM, 2016 | University |
| 2016 | Industrial Training [BDA38004], Sesi 2015/2016 Semester 3, UTHM, 2016 | University |
| 2011 | Static [BDA1023 & BDA10203], Sesi 20102011 Semester 2, UTHM, 2011 | University |
| 2011 | Static [BDA10203], Sesi 20112012 Semester 1, UTHM, 2011 | University |
| 2011 | Finite Element Method (Lab) [BDA4033], Sesi 20102011 Semester 3, UTHM, 2011 | University |
| 2011 | Finite Element Method (Lab) [BDA4033], Sesi 20102011 Semester 2, UTHM, 2011 | University |
| 2011 | Solid Mechanics 1 [BDA10402], Sesi 20112012 Semester 1, UTHM, 2011 | University |
| 2010 | Static [BDA1023 & BDA10203], Sesi 20102011 Semester 1, UTHM, 2010 | University |
| 2010 | Statics [BDA10203], Sesi 20102011 Semester 1, UTHM, 2010 | University |
| 2010 | Engineering Lab Practice IV [BDA2721], Sesi 20102011 Semester 1, UTHM, 2010 | University |
| 2010 | Engineering Laboratory V [BDA3701], Sesi 20102011 Semester 1, UTHM, 2010 | University |
| 2009 | Solid Mechanics [DDA2073], Sesi 20082009 Semester 2, UTHM, 2009 | University |
Research Grants And Contracts
Publications
| Book Chapters |
|---|
| N. Abdul Latif, Z. Sajuri, J. Syarif, Y. Mutoh (2014) Effect Of Strain Rate On Tensile Strength And Work Hardening For Al-Zn Magnesium Alloys, Recent Trends In Nanotechnology And Materials Science, Springer International Publishing Switzerland 2014 , 77, ISBN:9783319045153 |
| General Publications |
| Md Asrul Nasid Masrom (2018) Laporan Kajian Pengesanan Graduan 2016, UTHM , 1, ISBN:- |
| Journal |
| N.F. Mohd Joharudin, N. Abdul Latif, M.S. Mustapa, M.N. Mansor, W.A. Siswanto, J. Murugesan, F. Yusof (2019) Effect Of Amorphous Silica By Rice Husk Ash On Physical Properties And Microstructures Of Recycled Aluminium Chip Aa7075, MATERIALS SCIENCE AND TECHNOLOGY ENGINEERING, WILEY-V C H VERLAG GMBH , 3, 283, ISSN:09335137 |
| Norzarina Maat, Mohd Khir Mohd Nor, Choon Sin Ho, Noradila Abdul Latif, Al Emran Ismail, Kamarul-Azhar Kamarudin, Saifulnizan Jamian, Mohd Norihan Ibrahim@Tamrin , Muhamad Khairudin Awang (2019) Effects Of Temperatures And Strain Rate On The Mechanical Behaviour Of Commercial Aluminium Alloy Aa6061, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit Akademia Baru , 2, 21, ISSN:22897879 |
| Mohammad Sukri Mustapa, Noradila Abdul Latif, Nurul Farahin Mohd Joharudin, Shahruddin Mahzan, Mohd Idrus Masirin and Norashikin Abdul Hamid (2018) The Effect Of Heat Treatment On Compression Strength Of Recycled Aa6061 Aluminium Chips, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 10, 124, ISSN:16629752 |
| A. L. Mohd Tobi, Z. Kamdi, M. I. Ismail, M. Nagentrau, L. N. H. Roslan,Z. Mohamad, A. S. Omar, N. Abdul Latif (2017) Abrasive Wear Failure Analysis Of Tungsten Carbide Hard Facing On Carbon Steel Blade, MATERIALS SCIENCE AND ENGINEERING, IOP SCIENCE , 1, 21, ISSN:1757899X |
| N.A.Ahmad, Z. Kamdi, Z. Mohamad, A. S. Omar, N. Abdul Latif, A. L.Mohd Tobi (2017) Characterization Of Wc-10ni Hvof Coating For Carbon Steel Blade, MATERIALS SCIENCE AND ENGINEERING, IOP SCIENCE , 1, 11, ISSN:1757899X |
| N. Abdul Latif1, Z. Sajuri and J. Syarif (2017) Effect Of Tensile Strain Rates On Flow Stress For Extruded Az31 And Az61 Magnesium Alloys, INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, Universiti Malaysia Pahang , 3, 3812, ISSN:22298649 |
| N. Abdul Latif, Z. Sajuri, J. Syarif, Y. Miyashita (2016) Effect Of Loading Rate On Fracture Behaviour Of Mg-Al-Zn Alloys, JURNAL TEKNOLOGI, UTM , 83-89, ISSN:21803722 |
| Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Noradila Abdul Latif, Muhammad Irfan Ab Kadir, Mohd Arif Samsi (2016) Heat Treatment For An Recycling Aluminum Aa6061 Using Milling Process At Various Holding Aging Time, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), IJET , 12, 2582, ISSN:09754024 |
| N. Abdul Latif, Z. Sajuri, J. Syarif (2014) Effect Of Aluminium Content On The Tensile Properties Of Mg-Al-Zn Alloys, JURNAL KEJURUTERAAN (JOURNAL OF ENGINEERING), Penerbit UKM , 8, 35-39, ISSN:01280198 |
| N. Abdul Latif, Z. Sajuri, S. Junaidi, Y. Miyashita, Y. Mutoh (2014) Effect Of Strain Rate On Tensile And Work Hardening Properties For Al-Zn Magnesium Alloys, INTERNATIONAL JOURNAL OF MATERIALS ENGINEERING INNOVATION, 2014 Inderscience Enterprises Ltd. , 2, 28-37, ISSN:17572754 |
| Media Digital |
| Norhasyimah Hamzah, Arihasnida Ariffin,Noradila Abdul Latif, Khuneswari Gopal Pillay & Saliza Asman (2018) Masakan Nusantara, UTHM , ISBN:- |
| Prosiding / Seminar |
| Mohammad Sukri Mustapa, Noradila Abdul Latif, Nurul Farahin Mohd Joharudin, Shahruddin Mahzan, Mohd Idrus Mohd Masirin, Norashikin Abdul Hamid (2018) The Effect Of Heat Treatment On Compression Strength Of Recycled Aa6061 Aluminium Chips, SCIENTIFIC.NET , 124, ISBN:9783035713367 |
| A. L. Mohd Tobi, Z. Kamdi, M. I. Ismail, M. Nagentrau, L. N. H. Roslan, Z. Mohamad, A. S. Omar, N. Abdul Latif (2017) Abrasive Wear Failure Analysis Of Tungsten Carbide Hard Facing On Carbon Steel Blade , IOP PUBLISHING LTD , 1, ISBN:17578981 |
| Nurul Fitriah Nasir, Noradila Abdul Latif , Sharifah Adzila Syed Abu Bakar, Mohd Nasrull Abdul Rahman, Siti Norhidayah Selamat and Nurul Nadirah Nasharudin (2017) Determination Of Physiochemical Properties Of Palm Oil Methyl Ester Catalyzed By Waste Cockle Shells, AIP Publishing , 020013-1, ISBN:978-0-7354-1499 |
| N. Abdul Latif, Z. Sajuri, J. Syarif, Y. Miyashita (2015) Effect Of Loading Rate On Fracture Behaviour Of Mg-Al-Zn Alloys, Universiti Kebangsaan Malaysia |
| N. Abdul Latif, Z. Sajuri, J. Syarif (2013) Effect Of Aluminium Content On The Tensile Properties Of Mg-Al-Zn Alloys, Universiti Kebangsaan Malaysia |
| N. Abdul Latif, Z. Sajuri, J. Syarif, Y. Miyashita, Y. Mutoh (2013) Effect Of Strain Rates On Tensile And Work Hardening Properties For Al-Zn Magnesium Alloys, IOP Publishing Ltd |
| N. Abdul Latif, R. Ramli (2010) Pembangunan Modul Pembelajaran Bagi Sistem Kawalan Automasi Plc, UTHM |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2018 | Reviewer for Jurnal Kejuruteraan (Journal of Engineering), UKM Press, 2018 | International |
| 2018 | Reviewer for Journal of Mechanical Engineering (JMechE), Penerbit UiTM, 2018 | International |
| 2018 | Reviewer for International Journal of Engineering and Technology (UAE) Special Issue, Science Publishing Corporation, 2018 | International |
| 2018 | Reviewer for International Conference on Mechanical & Manufacturing Engineering 2018 (ICME2018) | International |
| 2018 | Reviewer for International Journal of Integrated Engineering (IJIE), Penerbit UTHM, 2018 | International |
| 2018 | Reviewer for Jurnal Teknologi, Penerbit UTM Press, 2018 | International |
| 2017 | Reviewer for International Conference on Mechanical & Manufacturing Engineering 2017 (ICME2017) | International |
| 2017 | Reviewer for The 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2017) | International |
| 2017 | Reviewer for UTHM Postgraduate Publication 2017 | University |
| 2016 | Reviewer for Colloquium on Advanced Mechanics 2016 (CAMS2016) | University |
Supervision
| Year | Description | Role |
|---|---|---|
| 2019 | Supervisor for Muhammad Luqman Abd. Rahim, BEng, UTHM, 2019 | Supervisor |
| 2018 | Co-Supervisor for Akmal Faiz Shahadan, BEng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Muhamad Razzi Mohd Rashid, BEng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Farid Hilmi Ismail, BEng, UTHM, 2018 | Supervisor |
| 2018 | Supervisor for Aliff Ashraf Adnan, BEng, UTHM, 2018 | Supervisor |
| 2017 | Supervisor for Afiffikri Bin Auspan, BEng, UTHM, 2017 | Supervisor |
| 2017 | Examiner for Thesis: Wan Zubaidie Bin Wan Zahari (2017): The Enhancement of Interface and Mechanical Properties of Sugar Palm Fiber/Polyprolene Composites | Examiner |
| 2017 | Examiner for Thesis: Muhammad Muslimin Bin Mat Husin (2017): The Characterization Of Mechanical Behaviour On Polyproplyene Composite Reinforced With Kenaf Fibre | Examiner |
| 2016 | Co-Supervisor for Mohamad Alif Bin Sukaimi, BEng, UTHM, 2016 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2013 | Attachment Program (Exchange student - PhD level), Nagaoka University of Technology, Japan, April - September 2013 | International |