Staff Profile

Full NameTs. Dr. NORFAUZI BIN TAMIN
FacultyFAKULTI PENDIDIKAN TEKNIKAL DAN VOKASIONAL
DepartmentJABATAN PENGAJIAN TEKNOLOGI
Email
Designation DS45 - PENSYARAH

Field of Expertise

Field Category (KPT) MANUFACTURING
Field (KPT) Machinery and Equipment
Field of Specialization (KPT) Machinery and Equipment

Areas of Research Interest

1. Machine tool: Tool wear, wear mechanism and Machining
2. Friction stir welding (dry, underwater and hot water)

Innovation Field of Interest

1. Jig and Fixture
2. Cutting tool development

Academic Qualification

YearQualificationInstitution
2021 DIPLOMA LANJUTAN KEMAHIRAN MALAYSIA PENGURUSAN REKABENTUK & PENGATURCARAAN PEMESINAN JABATAN PEMBANGUNAN KEMAHIRAN, KEMENTERIAN SUMBER MANUSIA
2021 DIPLOMA KEMAHIRAN MALAYSIA PEMBANGUNAN REKABENTUK & PENGATURCARAAN PEMESINAN JABATAN PEMBANGUNAN KEMAHIRAN, KEMENTERIAN SUMBER MANUSIA
2020 DOKTOR FALSAFAH KEJURUTERAAN PEMBUATAN UNIVERSITI TEKNIKAL MALAYSIA MELAKA
2020 SIJIL KEMAHIRAN MALAYSIA OPERASI PEMESINAN JABATAN PEMBANGUNAN KEMAHIRAN, KEMENTERIAN SUMBER MANUSIA
2019 SIJIL KEMAHIRAN MALAYSIA PROSES KIMPALAN ARKA KEPINGAN LOGAM JABATAN PEMBANGUNAN KEMAHIRAN, KEMENTERIAN SUMBER MANUSIA
2017 SARJANA KEJURUTERAAN SISTEM PEMBUATAN UNIVERSITI TEKNIKAL MALAYSIA MELAKA
2014 SARJANA MUDA PENGURUSAN PEMBUATAN OPEN UNIVERSITY MALAYSIA
2008 DIPLOMA KEJURUTERAAN MEKANIKAL (PEMBUATAN) POLITEKNIK JOHOR BAHRU
2002 CERTIFICATE/SIJIL KEJURUTERAAN MEKANIKAL (PEMBUATAN) POLITEKNIK JOHOR BAHRU
1999 SC/MCE/SPM/SPVM TIADA BIDANG SEKOLAH MENENGAH KEBANGSAAN TEKNIK KOTA TINGGI JOHOR

Professional Appointments

DS45 - Pensyarah

Professional Societies

YearDescriptionRoleLevel
14/04/2021 - 14/04/2022 Malaysia Board of Technologists (MBOT)
Ahli Kebangsaan

Publications

Journal
Anis A.A., Hadzley A.B., Aumar A., Norfauzi T., Fairuz M.R., Herawan S.G., Thongkaew K.
(2021) Influence Of Sintering Temperature On Density, Hardness, Shrinkage And Microstructure Of Alumina-Zirconia Cutting Tool, INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, UNIVERSITI MALAYSIA PERLIS , 8, 135, ISSN:19855761
Afuza A.A., Hadzley A.B., Norfauzi T., Umar A.A., Faiz M., Naim F., Thongkaew K.
(2020) Analysis Of Particles Size Distribution On The Agglomeration And Shrinkage Of Alumina-Zirconia Compacts, INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, UNIVERSITI MALAYSIA PERLIS , 5, 277, ISSN:19855761
Azhar A.A., Bakar M.H.A., Tamin N., Azlan U.A.-A., Hassan M.H.
(2020) Friction And Wear Analysis Of Ceramic Cutting Tool Made From Alumina-Zirconia-Chromia, JURNAL TRIBOLOGI, MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS) , 27, ISSN:22897232
Norfauzi T., Hadzley A.B., Azlan U.A.A., Faiz M.M., Naim M.F., Aziz A.A.
(2019) Comparison Machining Performance Of Al2o3, Zta And Zta Doped Cr2o3 Cutting Tools On Aisi 1045, MATERIALS RESEARCH EXPRESS, INSTITUTE OF PHYSICS PUBLISHING , 2, ISSN:20531591
Faiz M.M., Norfauzi T., Hairizal M., Hadzley A.B., Naim M.F., Umar U.A.A., Aziz A.A., Noorazizi S.
(2019) Effect Of Hydraulic Pressure On Hardness, Density, Tool Wear And Surface Roughness In The Fabrication Of Alumina Based Cutting Tool, JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, PENERBIT UNIVERSITI TEKNIKAL MALAYSIA MELAKA , 23, ISSN:19853157
Norfauzi T., Hadzley A.B., Umar U.A.A., Afuza A.A., Faiz M.M., Naim M.F.
(2019) Effect Of Sintering Temperature On Density, Hardness And Tool Wear For Alumina-Zirconia Cutting Tool, JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, UNIVERSITI MALAYSIA PAHANG , 3, 4648, ISSN:22894659
Norfauzi T., Hadzley A.B., Azlan U.A.A., Afuza A.A., Faiz M.M., Naim M.F.
(2019) Fabrication And Machining Performance Of Ceramic Cutting Tool Based On The Al2o3-Zro2-Cr2o3 Compositions, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY, ELSEVIER EDITORA LTDA , 5114, ISSN:22387854
Bakar M.H.A., Fahmi N., Tamin N., Afuza A., Izamshah R., Kasim S., Amran M., Shamsudin N., Raffi N.F.
(2019) Surface Integrity Study For Fc300 Cast Iron Using Tiain Ball End Mill, JURNAL TRIBOLOGI, MALAYSIAN TRIBOLOGY SOCIETY (MYTRIBOS) , 4, 35, ISSN:22897232
Hadzley A.B., Anis A.A., Norfauzi T., Farizan M.N., Osman M.H., Noorazizi S.
(2018) Analysis Of Surface Integrity And Formation Of Material Side Flow In Dry And Wet Machining Of Aluminum Alloy, JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, PENERBIT UNIVERSITI TEKNIKAL MALAYSIA MELAKA , 501, ISSN:19853157
Ab Wahab N., Saleh A.B.M., Nordin A.K.B., Tamin N.F.B., Ibrahim M.A.B., Ahmad S., Hadi D.B.A.
(2018) Development Of Portable Magnetic Clamping For Lathe Machine, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ASIAN RESEARCH PUBLISHING NETWORK , 902, ISSN:18196608
Osman M.H., Tamin N.F., Ahmad M.N., Ab. Rahman M.H., Wahid M.K., Maidin N.A., Abu Bakar M.H., Azahar A.A.
(2018) Effect Of Cutting Parameters On Surface Roughness In Dry Drilling Of Aisi D2 Tool Steel By Using Taguchi Method, JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, PENERBIT UNIVERSITI TEKNIKAL MALAYSIA MELAKA , 535, ISSN:19853157
Prosiding / Seminar
Norfauzi T., Hadzley A.B., Umar U.A.A., Azhar A.A.
(2021) Effect Of Pressure On Density, Porosity And Flexural Strength During Cold Isostatic Press Of Alumina -Ysz-Chromia Cutting Tool, IOP PUBLISHING LTD , 1, ISBN:17426596
Abu Bakar H., Fahmi N., Mokhtar F., Tamin N., Azlan U., Adam A.A., Izamshah R., Kasim S.
(2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool, EDP SCIENCES , 1, ISBN:2261236X
Azlan U.A.A., Hadzley M., Fauzi Tamin N., Noor F.M., Azhar A.A., Rahimi Yusoff M., Noriman N.Z.
(2017) Observation Of Built-Up Edge Formation On A Carbide Cutting Tool With Machining Aluminium Alloy Under Dry And Wet Conditions, EDP SCIENCES , 1, ISBN:2261236X
Fauzi Tamin N., Zlan U.A.A., Hadzley M., Remle N.S., Hairizal Osman M., Rahimi Yusoff M., Noriman N.Z.
(2017) Study On Surface Integrity Of Aisi 1045 Carbon Steel When Machined By Carbide Cutting Tool Under Wet Conditions, EDP SCIENCES , 1, ISBN:2261236X

Courses & Training

YearDescription
Organiser / Venue
Date
2022 DEVELOPMENT THE GOOD MULTI CHOICE QUESTION
UTHM / GOOGLE MEET
27/04/2022
2022 PRODUCING INDUSTRY-READY GRADUATES: CURRENT CHALLENGES
UTHM / GOOGLE MEET
31/03/2022
2022 KURSUS ASAS KEWANGAN UNIVERSITI
UTHM / APLIKASI GOOGLE MEET
28/03/2022 - 29/03/2022
2022 KURSUS PENGENDALIAN CNC MILLING MACHINE
LAIN-LAIN / BENGKEL TEKNOLOGI PEMESINAN TERMAJU, FPTV, UTHM
14/03/2022 - 17/03/2022

« Back