Staff Profile

Full NameTs. Dr. NUR KAMILAH BINTI YUSUF
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN AERONAUTIK (JKA)
Email
Designation DS51 - PENSYARAH
  PENYELIDIK KANAN
PUSAT PEMBUATAN DAN BAHAN TERMAJU (AMMC)
INSTITUT KEJURUTERAAN INTEGRASI

Field of Expertise

Field Category (KPT) MANUFACTURING
Field (KPT) Environmentally Sustainable Manufacturing
Field of Specialization (KPT) Environmentally Sustainable Manufacturing

Areas of Research Interest

1. Sustainable manufacturing with specifically on waste management and recyling
2. Recyling of waste aluminium or other metals to be used as a secondary resources
3. Modelling and Optimization using Response Surface Methodology (RSM) or Taguchi Method Robust Design
4. Life Cycle Assessment specifically on waste management

Innovation Field of Interest

1. Generating an alternative or secondary materials through recyling of waste products (i.e. Aluminium)
2. Generating a secondary resources through recyling of waste products to overcome the shortage of primary materials

Academic Qualification

YearQualificationInstitution
2017 DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL UNIVERSITI TUN HUSSEIN ONN MALAYSIA
2013 SARJANA KEJURUTERAAN MEKANIKAL UNIVERSITI TUN HUSSEIN ONN MALAYSIA
2010 SARJANA MUDA KEJURUTERAAN MEKANIKAL UNIVERSITI TUN HUSSEIN ONN MALAYSIA
2004 SC/MCE/SPM/SPVM SMK DATO HJ HASSAN YUNOS

Professional Appointments

DS51 - Pensyarah

Management Experience

DateDescription
01/05/2018 - 30/04/2023 Penyelidik Kanan
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)

Professional Societies

YearDescriptionRoleLevel
25/10/2016 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan
12/02/2019 - 11/02/2020 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
13/01/2019 - 31/12/9999 Technological Association of Malaysia (TAM)
Member Kebangsaan

Teaching Experience

YearDescriptionLevel
2018 Sustainable Manufacturing [CDC10503], Sesi 2017/2018 Semester 2, Universiti Tun Hussein Onn Malaysia 2018 University
2018 Instruments [BDT40602], Sesi 2018/2019 Semester 1, Universiti Tun Hussein Onn Malaysia 2018 University
2018 Jurutera dan Masyarakat [BDA40502], Sesi 2018/2019 Semester 1, Universiti Tun Hussein Onn Malaysia 2018 University
2018 Sustainable Manufacturing [CDC10503], Sesi 2018/2019 Semester 1, Universiti Tun Hussein Onn Malaysia 2018 University
2018 Pengurusan dan Etika Profesional [BDU20503], Sesi 2017/2018 Semester 2, Universiti Tun Hussein Onn Malaysia 2018 University
2017 Instruments [BDT40602], Sesi 2017/2018 Semester 1, Universiti Tun Hussein Onn Malaysia 2017 University
2017 Lukisan Kejuruteraan [BDU10303], Sesi 2017/2018 Semester 1, Universiti Tun Hussein Onn Malaysia 2017 University
2017 Engineering Technology Mathematics I [BDU20503], Sesi 2017/2018 Semester 1, Universiti Tun Hussein Onn Malaysia 2017 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
H249 Multiresponse Optimization and Environmental Analysis in Sustainable Direct Recycling of Aluminium Aircraft Component (AA7075) Ketua 30/06/2020
X084 Socio-Education Lab For Orang Asli Ahli 20/04/2019
1496 Determination of Functional Performance and Life Cycle Assessment in Sustainable Recycling Automotive Aluminium Scrap using Hot Press Forging Ahli 30/11/2018

Publications

Journal
C. S. Ho, M. A. Ab Rani, M. K. Mohd Nor, N. Maat, M. T. Hameed Sultan, M. A. Lajis, N. K. Yusuf
(2019) Characterization Of Anisotropic Damage Behaviour Of Recycled Aluminium Alloys Aa6061 Undergoing High Velocity Impact, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 247, ISSN:2229838X
Nur kamilah binti yusuf
(2018) Conjectured The Behaviour Of A Recycled Metal Matrix Composite (Mmc-Alr) Developed Through Hot Press Forging By Means Of 3d Fem Simulation , MATERIALS , MDPI , 6, 1, ISSN:19961944
Azlan Ahmad, Mohd Amri Lajis, Shazarel Shamsudin, Nur Kamilah Yusuf
(2018) Integrating Simulation With Experiment For Recycled Metal Matrix Composite (Mmc-Alr) Developed Through Hot Press Forging, KEY ENGINEERING MATERIALS, Trans Tech Publications , 8, 493, ISSN:1662-979
Nur Kamilah Yusuf, Mohd Amri Lajis and Azlan Ahmad
(2017) Hot Press As A Sustainable Direct Recycling Technique Of Aluminium: Mechanical Properties And Surface Integrity , MATERIALS, MDPI , 8, 1, ISSN:19961944
Lajis M.A., Ahmad A., Yusuf N.K., Azami A.H., Wagiman A.
(2017) Mechanical Properties Of Recycled Aluminium Chip Reinforced With Alumina (Al2o3) Particle: Mechanische Eigenschaften Von Mit Aluminiumoxid (Al2o3) Verstarkten Recycelten Aluminiumspanen , MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , Wiley-VCH Verlag , 4, 306, ISSN:9335137
Ahmad A., Lajis M.A., Yusuf N.K.
(2017) On The Role Of Processing Parameters In Producing Recycled Aluminum Aa6061 Based Metal Matrix Composite (Mmc-Alr) Prepared Using Hot Press Forging (Hpf) Process, MATERIALS, MDPI , 9, 1, ISSN:19961944
Ahmad A., Lajis M.A., Yusuf N.K., Shamsudin S., Zhong Z.W.
(2017) Parametric Optimisation Of Heat Treated Recycling Aluminium (Aa6061) By Response Surface Methodology , AIP CONFERENCE PROCEEDINGS , American Institute of Physics Inc. , 9, 1, ISSN:0094243X
Ahmad A., Lajis M.A., Yusuf N.K., Wagiman A.
(2016) Hot Press Forging As The Direct Recycling Technique Of Aluminium- A Review , ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , Asian Research Publishing Network , 5, 2258 , ISSN:18196608
M.A. Lajis, S.S. Khamis , N.K. Yusuf
(2014) Optimization Of Hot Press Forging Parameters In Direct Recycling Of Aluminium Chip (Aa 6061) , KEY ENGINEERING MATERIALS, 10139826 , 12, 223 , ISSN:10139826
N.K. Yusuf, M.A. Lajis , M.I. Daud , M.Z. Noh
(2013) Effect Of Operating Temperature On Direct Recycling Aluminium Chips (Aa6061) In Hot Press Forging Process , APPLIED MECHANICS AND MATERIALS , Scientific.net , 8, 728, ISSN:16609336
Prosiding / Seminar
MOHD AMRI LAJIS, NUR KAMILAH YUSUF, AND AZLAN AHMAD
(2018) Life Cycle Assessment On The Effects Of Parameter Setting In Direct Recycling Hot Press Forging Of Aluminum, TRANS TECH PUBLICATIONS LTD , 143, ISBN:9783035712070

Supervision

YearDescriptionRole
2019 Supervisor for Aizan Sazwan bin Medi, Final Year Project 2, Universiti Tun Hussein Onn Malaysia, 2019 Supervisor
2019 Supervisor for Aizan Sazwan bin Medi, Final Year Project 1, Universiti Tun Hussein Onn Malaysia, 2019 Supervisor
2019 Supervisor for Emanuel Joel, Final Year Project 2, Universiti Tun Hussein Onn Malaysia, 2019 Supervisor
2018 Supervisor for Emanuel Joel, Final Year Project 1, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2018 Co-Supervisor for Nur Syahira binti Mat Vira, Final Year Project 2, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2018 Supervisor for Ahmad Kamil bin Mazlan, Final Year Project 2, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2018 Supervisor for Adib bin Ahmad Mukhtari, Final Year Project 2, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2017 Supervisor for Adib bin Ahmad Mukhtari, Final Year Project 1, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2017 Supervisor for Ahmad Kamil bin Mazlan, Final Year Project 1, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2017 Co-Supervisor for Nur Syahira binti Mat Vira, Final Year Project 1, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor

« Back