PROF. MADYA Ts. Dr. MOHD RASIDI BIN IBRAHIM
DS54 PROFESOR MADYA
Jabatan Kejuruteraan Pembuatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan
PROF. MADYA Ts. Dr. MOHD RASIDI BIN IBRAHIM

SIJIL KEMAHIRAN MALAYSIA OPERASI PEMESINAN , JABATAN PEMBANGUNAN KEMAHIRAN (2020)
SIJIL KEMAHIRAN MALAYSIA OPERASI PEMESINAN , JABATAN PEMBANGUNAN KEMAHIRAN (2020)
SIJIL KEMAHIRAN MALAYSIA OPERASI LATIHAN VOKASIONAL , JABATAN PEMBANGUNAN KEMAHIRAN (2019)
DOKTOR FALSAFAH KEJURUTERAAN PEMBUATAN , UNIVERSITY OF BRUNEL, WEST LONDON (2010)
SARJANA MUDA KEJURUTERAAN MEKANIKAL , LEEDS METROPOLITAN UNIVERSITY (2004)
DIPLOMA KEJURUTERAAN MEKANIKAL , GERMAN MALAYSIAN INSTITUTE (2000)
SIJIL KEMAHIRAN MALAYSIA PEMBUAT ACUAN DAN ALAT PEMOTONG - LEKAPAN & JIG , MAJLIS LATIHAN VOKASIONAL KEBANGSAAN MALAYSIA (1998)

CategoryExpertise
Field Category (KPT) : ENGINEERING AND TECHNOLOGY
Field (KPT) : Industrial and Manufacturing Engineering
Field of Specialization (KPT) : Fabrication Technology (Including Manufacturing of High Speed/ Precision Equipment Fabrication Machinery and Equipment and Standard Supporting Technologies of Fabrication for Metal and Plastic)

Precision and Micro Manufacturing
Vibration and Ultrasonic Assisted Machining
Design and Develop Machine Building on Finite Element Analysis (FEA)
Laser Assisted Machining
Weaponize WIG and Drone

Design of Innovation a New Micro Machine Assisted by Ultrasonic Vibration Cutting
Micro and Nano Precision manufacturing machining Process
Static and Dynamic Analysis In Ultra-precision machining
Design and develop innovative method and tool for Precision Micro Nano Manufacturing
Innovation of Ultrasonic Frequency Manufacturing
Design and Development of weaponize Wing in ground and drone

DateDescription
01/06/2021 - 31/12/2023 Penyelidik Bersekutu
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Precision Machining Research Center (PREMACH)
01/01/2021 - 31/12/2023 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Research Center For Unmanned Vehicles (RECUV)
01/04/2022 - 31/03/2023 Felo Pelajar Tanpa Asrama
Pusat Perumahan Pelajar, Kolej Kediaman Luar Kampus Parit Raja
01/04/2021 - 31/01/2022 Pengetua Kolej Kediaman
Pejabat Pelajar Tanpa Asrama, Pejabat Pengetua
01/01/2020 - 30/06/2021 Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Precision Machining Research Center (PREMACH)
01/04/2019 - 31/03/2021 Pengetua Kolej Kediaman
Pejabat Pelajar Tanpa Asrama, Pejabat Pengetua
01/02/2015 - 31/01/2016 Felo Kolej Kediaman
Pusat Perumahan dan Pengangkutan Pelajar, Kolej Kediaman Melewar
01/01/2013 - 31/12/2014 Pengetua Kolej Kediaman
Pusat Perumahan dan Pengangkutan Pelajar, Kolej Kediaman Tun Dr. Ismail
01/04/2012 - 31/03/2013 Felo
Pejabat Hal Ehwal Pelajar, Unit Perumahan - Kolej Kediaman Melewar

DS54 Profesor Madya

YearDescriptionRoleLevel
02/05/2018 - 01/05/2019 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
20/08/2019 - 19/08/2020 The Institution of Engineering and Technology (IET)
Chartered Engineer Antarabangsa
21/08/2019 - 20/08/2020 Engineering Council (EC)
Chartered Engineer Antarabangsa
12/03/2019 - 11/02/2020 The Institution of Engineering and Technology (IET)
Member Antarabangsa
21/09/2016 - 31/12/2017 Ultrasonic Industry Association (UIA)
Professional Member Antarabangsa
19/04/2021 - 18/04/2022 Chartered Engineer
PROFESIONAL ENGINEER Antarabangsa
15/08/2016 - 15/08/2018 Industrial Engineering Operation Management (IEOM Society)
Professional Member Antarabangsa
26/12/2021 - 31/12/9999 Akademi Profesor Malaysia
Ahli Bersekutu Kebangsaan
19/08/2020 - 18/08/2021 Engineering Council (EC)
REGISTERED PROFESIONAL ENGINEER Antarabangsa
19/08/2020 - 18/08/2021 Chartered Engineer
PROFESIONAL ENGINEER Antarabangsa

YearDescriptionLevel
2022 Advanced Machining Process [BDD40703], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Bachelor Degree Project I [BDX49002], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Manufacturing Technology I [BDX10902], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Manufacturing Technology Ii [BDX20502], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Manufacturing Technology [BDA30502], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Manufacturing Technology [BDA31403], Session 20212022 Semester 2, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Product Realization [BDX40106], Session 20222023 Semester 1, Universiti Tun Hussein Onn Malaysia, 2022 University
2022 Skm Practice Ii [BDX28108], Session 20212022 Semester 3, Universiti Tun Hussein Onn Malaysia, 2022 University
2021 Advanced Machining Process [BDD40703], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 University
2021 Manufacturing Technology Ii [BDX20502], Session 20212022 Semester 1, Universiti Tun Hussein Onn Malaysia, 2021 University
2021 Manufacturing Technology [BDA30502], Session 20202021 Semester 2, Universiti Tun Hussein Onn Malaysia, 2021 University
2020 Manufacturing Technology Ii [BDX20502], Session 20202021 Semester 1, Universiti Tun Hussein Onn Malaysia, 2020 University
2020 Manufacturing Technology [BDA30502], Session 20192020 Semester 2, Universiti Tun Hussein Onn Malaysia, 2020 University
2019 Advanced Machining Process [MDP10203], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 Manufacturing Technology [BDA30502], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 Manufacturing Technology [BDA30502], Session 20192020 Semester 1, Universiti Tun Hussein Onn Malaysia, 2019 University
2019 Mechanical Engineering Workshop Ii [BDA18301], Session 20182019 Semester 2, Universiti Tun Hussein Onn Malaysia, 2019 University
2018 Entrepreneurship [BDA41002], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Entrepreneurship [BDA41002], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Entrepreneurship [BPK20802], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Entrepreneurship [BPK20802], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Manufacturing Technology [BDA30502], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Manufacturing Technology [BDA30502], Session 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Mechanical Engineering Workshop Ii [BDA18301], Session 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2017 Entrepreneurship [BPK20802], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Entrepreneurship [BPK20802], Session 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Manufacturing Technology [BDA30502], Session 20162017 Semester 2, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Advanced Machining Process [MDP10203], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Manufacturing Technology [BDA30502], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Manufacturing Technology [BDA30502], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Mechanical Engineering Workshop I [BDA18201], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Mechanical Engineering Workshop Ii [BDA18301], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Technical Drawing And Cad [BDA10703], Session 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Technical Drawing And Cad [BDA10703], Session 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2015 Advanced Machining Process [MDP10203], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Manufacturing Technology [BDA30502], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Mechanical Engineering Workshop I [BDA18201], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Mechanical Engineering Workshop Ii [BDA18301], Session 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Statics [BDA10203], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Technical Drawing And Cad [BDA10703], Session 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Advanced Machinery [BDD4073], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Advanced Machining Process [BDD40703], Session 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Advanced Machining Process [BDD40703], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Manufacturing Technology [BDA30502], Session 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Advanced Machinery [BDD4073], Session 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Advanced Machining Process [BDD40703], Session 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Advanced Machining Process [MDP10203], Session 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Advanced Machining Process [MDP10203], Session 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Advanced Machinery [BDD4073], Session 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Creativity And Innovation [BDA10602], Session 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Creativity And Innovation [BDA10602], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Manufacturing Technology [BDA30502], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Project Management [MDC10302], Session 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University

CodeTitleDesignationEnd Date
Q183 Study of vegetable based Nanofluids for green machining process for minimum quantity lubrication method. Ahli 31/08/2024
Q071 Prototype Design of Remote Controlled Weapon System Hover Wing in Ground Craft (RCWS-WIG) for Malaysian Coastal Defence Ketua 31/01/2024
H870 Design Organization Manual production for UTHM Cargo Drone Design Organization Approval (DOA) Ahli 14/03/2023
H487 Program : Bio-Brick - Carbon Reduction Building Material: Aerated Concrete Brick Using Bacteria for Carbon Reduction Projek : Bio-Brick - Carbon Reduction Building Material: Development of a Climatic Chamber for Curing of Bio-Brick Ahli 31/12/2021
H510 IR4.0 implementation in e-Manufacturing : A development of Industrial Revolution 4.0 Premach research lab framework towards e-Manufacturing implementation IR4.0 implementation in e-Manufacturing : A smart profiling system for performance monitoring using Artificial intelligent Technique Ketua 31/12/2021
H514 Program : Development of bamboo yarns and nonwovens for technical textiles application Projek : Extraction and crushing process of bamboo culm for bamboo fibre production Ahli 30/06/2021
K136 Design, Build and Flight Test of A High Payload Cargo Drone System (C-Drone) Ahli 30/04/2021
H205 Experimental Study On The Degree Of Surface Generation By Edge Preparation Tools And Propose Optimization Approach Ketua 30/03/2021
X108 Kolaborasi antarabangsa antara 3 universiti iaitu UNITEN. UTHM dan TELKOM Universiti, Indonesia berkaitan pengembangan pelancongan di teluk pelabuhan Ratu Ahli 16/05/2020
X106 Knowledge Transfer Program: New Development of organic repellent product (bio pesticide) from extraction of melalence cajuputi powell Ahli 01/02/2020
1591 Determination of tribological characteristic of modified jatropha oil mixed with ionic liquid as an additive for sustainable lubricant in machining process Ahli 31/01/2020
1594 The influence of nozzle designs and input parameters on the characterization of SCCO2 flow pattern that affects the machining performance Ahli 31/01/2020
W003 Pengembangan Wisata di Teluk Pelabuhan Ratu Kabupaten Sukabumi melalui Pendekatan ICT, Penerapan Energi Terbarukan dan Penangkapan Ikan Berkelanjutan Ketua 31/01/2020
1586 Parameter Correlation and Mechanism in Catalytic Erosion of Polycrystalline Diamond Ahli 31/07/2019
1596 A New Approach of Recycling Aluminium Alloy Chip (AA6061) Integrated With Particulate Silicon Carbide as an Alternative Metal Matrix Composite Material Ahli 31/07/2019
X107 Bussiness Excellence assesment of Indonesia soes compare to Malaysia enterprise Ahli 25/06/2019
X109 Design of ultrasonic vibration assisted turning (UVAT) to increase surface finish and tool life in machining industry Ahli 25/06/2019
X079 Experimental Study on the effect of combination of drilling and reaming tool geometry on hole quality Ahli 30/06/2018
X080 The Effect of Helix angle variation on drilling performance Ahli 30/06/2018
X081 Experimental study on surface generation in vibration assisted milling Ketua 30/06/2018
U554 Experimental And Simulation Of Ultrasonic Vibration Assisted Milling In Surface Roughness And Temperature Toward Inconel 718 Ketua 31/05/2018
U482 Development of Algorithm to Determine the Surface Roughness and Tool Ware in Uvat (Ultrasonic Vibration Assisted Turning) Ketua 31/03/2018
U531 Catalytic Aided Electrical Discharge Machining of Polycrystalline Diamond Tools Ahli 31/03/2018
U596 Tajuk Baharu : Experimental study of biomedical stainless steel 316L vibration assisted milling using retrofittable 1D VAM worktable Tajuk asal:Experimental and simulation of ultrasonic vibration assisted milling in surface roughness and temperature toward inconel 718 Ketua 31/01/2018
1467 Tribological characteristic of additive effect in palm oil based Trimethylolpropane (TMP) ester for sustainable metalworking lubricant Ahli 31/12/2017
A102 Semi-Automated Dough Divider Machine Ahli 01/05/2017
B052 Ultrasonic Vibration Assistion Micro-Machining Table (UVAM) Ketua 24/08/2016
R012 Design and Develop A Vibration Assistted Micro-Milling Prototype Ketua 15/12/2015
1218 Characterization of Supercritical Carbon Dioxide Cooling Technique in Machining Process Ketua 30/09/2015
1299 Micro-Turning : Theorytical, Mathematical Modelling, Analysis and Performance Ahli 31/08/2015
S020 Laser Assisted Micro - Milling Of Biomaterial For Implant Parts Ahli 31/07/2015
X003 A Research In Laser Assisted Micro Milling Ahli 27/11/2014
1094 Vibration Assisted Turning Theoretical Modelling, Simulation and Application Ketua 31/03/2014

Book
Rasidi Ibrahim, Noorhanis Nazuwa, Azuliana Azwin Azmi, Aishah Ahmad
(2022) Ultrasonic Vibration Assistd Milling And Turning, Principle, Development And Application, Series 3, UTHM , 1, ISBN:9789672817673
Hoon Ming Siang, Rasidi Ibrahim, Suresh Thanakodi, Saiful Muzakir, Hadzley Abu Bakar, Anuar Mohamad, Einly Lim
(2021) Diy Automation Project Book 2, Bizchip Technology Centre , 1, ISBN:9789671886618
Hoon Ming Siang, Rasidi Ibrahim, Suresh Thanakodi, Low Tan Jung, Shukri Rajab, Anuar Mohamad, Einly Lim
(2021) Diy Automation Projects, Bizchip Technology Centre , 1, ISBN:9789671886601
MOHD RASIDI IBRAHIM, FARAH BATRISYIA, LUQMAN HADI, NADIATUL HAIKAL
(2021) Ultrasonic Vibration Assistd Milling And Turning, Principle, Development And Application, UTHM , 1, ISBN:9789672817284
Mohd Rasidi Bin Ibrahim, Noor Hakim Bin Rafa?ai, Kamarudin Bin Kamdani
(2018) Manufacturing Technology, UTHM , 1, ISBN:0302380000
DR MOHD RASIDI IBRAHIM
(2018) Ultrasonic Vibration Assisted Milling And Turning Principle, Development And Application , UTHM , 1, ISBN:9789672183778
Rasidi Ibrahim
(2010) Vibration Assisted Machining : Modelling, Simulation, Optimization And Applications, British Library, Brunel University , 1, ISBN:529049
Book Chapters
Rasidi Ibrahim Haris Rachmat Damayanti Dida Anis Radzi Tatang Mulyana
(2021) An Investigation Of Finite Element Analysis (Fea) On Piezoelectric Compliance In Ultrasonic Vibration Assisted Milling (Uvam) For Preparing Surface Edge Treatment On Cutting Tool, Advance Aspect Of Engineering Research, B P International , 1, ISBN:9789390888061
I. Rasidi I., N. H. Rafai, E. A. Rahim, S. A. Kamaruddin, H. Ding, K. Cheng
(2021) Investigating The Cutting Mechanics In 2 Dimensional Ultrasonic Vibration Assisted Milling Towards Chip Thickness And Chip Formation, Advance Aspect Of Engineering Research Vol. 15, B P International , 1, ISBN:9789391215958
Haris Rachmat, Tatang Mulyana, Sulaiman bin H. Hasan, and Mohd. Rasidi bin Ibrahim
(2016) Design Selection Of In-Uvat Using Matlab Fuzzy Logic Toolbox, Recent Advances On Soft Computing And Data Mining, Springer , 555, ISBN:978-3-319-51279-2
General Publications
Rasidi Ibrahim, Fahmi Ghafir, Shafry, Yazilah
(2013) Bingkisan 2013 Kktdi, UTHM , 1, ISBN:-
Journal
Supawi, A., Ahmad, S., Ismail, N.I., Talib, N., Lee, W.K.,Haq, R.H.A., Ho, F.H., Ibrahim, M.R., Karim, F.
(2022) The Machinability Performance Of Rbd Palm Oil Dielectric Fluid On Electrical Discharge Machining (Edm) Of Aisi D2 Steel, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 3, 140, ISSN:2229838X
Budi Sulistyo, Husni Amani, Sri Widaningrum, Musli Mohammad, & Rasidi Ibrahim
(2021) Comparative Study Of Business Excellence Frameworks And Awards In Southeast Asian Countries, INTERNATIONAL JOURNAL OF BUSINESS AND SOCIETY, UNIVERSITI MALAYSIA SARAWAK , 12, 1123, ISSN:15116670
Sarjito, Brandon Lau , Rasidi Ibrahim , Zazuli Mohid
(2021) Structure Analysis Of Micro-Milling Machine Construction Frame Design, INTERNATIONAL JOURNAL OF ENGINEERING TRENDS AND TECHNOLOGY, SEVENTH SENSE RESEARCH GROUP , 1, 205, ISSN:22315381
Mohammad Arafat, Rasidi Ibrahim, Muhammad Agung Hambali
(2020) Damping Impact On 1-Dimensional Ultrasonic Vibration-Assisted Turning Machining, JOURNAL OF ADVANCED MECHANICAL ENGINEERING APPLICATIONS, UTHM , 10, 43, ISSN:27166201
Waluyo Adi Siswanto, Chong Bin Hong, Rasidi Ibrahim, Zulafif Rahim2, Neexon Khoo
(2020) Design And Performance Analysis Of Developed Computer Vision Measurement Application For End Mill Cutting Tool, INTERNATIONAL RESEARCH PUBLICATION HOUSE, INTERNATIONAL RESEARCH PUBLICATION HOUSE , 3, 5373, ISSN:09743154
Waluyo Adi Siswanto, Mohd Rasidi Ibrahim, Shaufi Soprudin, Mohammad Zulafif Rahim, C. Yee Long, Hanis Asyeera Rahman
(2020) Experimental Study On The Cutting Temperature, Vibration And Chip Formation In Machining Of 316l Under Dry And Flood Process, INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 6, 2701, ISSN:23473983
Sri Widaningrum, Musli Mohamad, Rasidi Ibrahim
(2020) Integration The 6th Category Business Excellence Framework, The 8th Clause Iso 9001:2015 And The 6th Category Kpku Indonesia Framework, THE INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 291, ISSN:2229838X
Budi Sulistyo, Riandi Aditia Darmayana, Musli Mohammad, Rasidi Ibrahim
(2020) Key Performance Indicators Of Indonesia State-Owned Enterprise - A Model Using Bsc And Bef, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 2, 115, ISSN:2229838X
Rino Andias, M.A. Haikal Ahmad, M. Zulafif Rahim, RHA Haq, A. M Sabri, N. Hafizah Aziz, Ahmad Mubarak Tajul Ariffin, Al Emran Ismail, Rasidi Ibrahim
(2020) The Influence Of Graphitization Catalyst Electrode In Electrical Discharge Machining Of Polycrystalline Diamond-Finishing Condition, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, PENERBIT UTHM , 2, 211, ISSN:2229838X
Adeleke Abdullahi, Noor Azah Samsudin, Mohd Rasidi Ibrahim, Muhammad Syariff Aripin, Shamsul Kamal Ahmad Khalid, Zulaiha Ali Othman
(2020) Towards Ir4.0 Implementation In E-Manufacturing: Artificial Intelligence Application In Steel Plate Fault Detection , INDONESIAN JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCE, INSTITUTE OF ADVANCED ENGINEERING AND SCIENCE , 10, 1, ISSN:25024752
Mila Faila Sufa, Nazrul Iszhar Ishak, M. Zulafif Rahim, Mohd Rasidi Ibrahim
(2019) Analysis Of Worker Performances Using Statistical Process Control In Fish Paste Otak-Otak Food Industries, INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 11, 685, ISSN:23473983
Sabariah Musa, Rasidi Ibrahim, Muhamad Shafik Zainal, Radin Maya Saphira Radin Mohamed, Mohamad Hidayat Jamal, Muhammad Muzzammil Shahabudin
(2019) Brownification Effects From Surface Water Sources To Intelligent Rainwater Harvesting System, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 313, ISSN:2229838X
Al Emran Ismail, Kamarul Azhar Kamarudin, Mohd Khir Mohd Nor, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim and Mohammad Zulafif Rahim
(2019) Calculating Of Stress Intensity Factors Of Soldered Joints With Multiple Cracks, INDONESIAN JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCEMULTIPLE CRACKS, IAESCORE , 4, 284, ISSN:25024752
Mulyana, T., Ibrahim, R Abd Rahim, E.
(2019) Human Machine Interface Design Analysis Of Defect Detection Prototype By Wonderware Intouch Software, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 3, 1, ISSN:17426588
S Kuddus, M S Mustapa, M R Ibrahim, S Shamsudin, M A Lajis and A Wagiman
(2019) Physical Characteristics Of Solid State Recycled Aluminum Chip Aa6061 Reinforced With Silicon Carbide (Sic) By Using Hot Extrusion Technique, JOURNAL OF PHYSICS: CONFERENCE SERIES, INSTITUTE OF PHYSICS PUBLISHING , 3, 1, ISSN:17426588
RASIDI IBRAHIM, Zainon Mat Sharif, Mohamad Zulafif Rahim, Mohd Syafiq Othman
(2019) The Design And Development Of Semi-Automated Paste Filling Machine For Spicy Shrimp Paste, INTERNATIONAL JOURNAL OF ADVANCED SCIENCE AND TECHNOLOGY, Science & Engineering Research Support soCiety , 10, 121, ISSN:2207-636
Erween Abd Rahim, Mohd Noor Jaafar, Zazuli Mohid, Mohd Rasidi Ibrahim, Said Ahmad
(2018) A Study On Cryogenic Supercritical Carbon Dioxide Coolant Delivery Technique When Machining Of Aisi 1045 Steel , JOURNAL OF MECHANICAL ENGINEERING, UITM , 1, 37, ISSN:18235514
RASIDI IBRAHIM, Chong Yee Long, Chee Yung Ng, Noor Hakim, Sukri Mustapa, Emran Ismail
(2018) Experimental Study On The Degree Of Surface Generation By Edge Preparation Tools In Milling 316l, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation Publisher of International Academic Journals , 12, 80, ISSN:2227-524
Siti Nor Azila Khalid, Al Emran Ismail, Muhd. Hafeez Zainulabidin, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Mohd Rasidi Ibrahim & Mohammad Zulafif Rahim
(2018) Mechanical Performances Of Twill Kenaf Woven Fiber Reinforced Polyester Composites, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 49, ISSN:2229838X
Al Emran Ismail, Fazimah Mat Noor, Zaleha Mohamad, Mohd Amran Madlan, M. Zulafif Rahim, M. Rasidi Ibrahim, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan, Nik Hisyamudin Muhd Nor
(2017) Effect Of Triggering Angles On The Crushing Mechanisms Of Hybrid Woven Kenaf/Aluminum Hollow Cylinders, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 12, 012034, ISSN:17426588
M.A. Haikal Ahmad, M. Zulafif Rahim, M. F. Mohd Fauzi, N. Hafizah Azis, A.E Ismail, Mohd Fahrul Hassan, A.M.T. Arifin, M.S. Yusof, and M. Rasidi Ibrahim
(2017) Electrical Discharge Machining Of Polycrystalline Diamond Using Copper Electrode - Finishing Condition, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing , 6, 012019-1, ISSN:1757899X
Radin Khairilhijra Khirotdin, Nurhafizzah Hassan, Umiera Asyikin Yusof, Muhammad Adzeem Mahadzir
(2017) Investigation Of Curing Conductive Inks On Fabrics Using Dlp Projector And Hot Plate, MATERIAL SCIENCE FORUM, SCIENTIFIC.NET , 1, 55, ISSN:978303835778
Z. Mohid. N. H. Rafai, M. Rasidi Ibrahim, E. A. Rahim
(2017) Melted Zone Shapes Transformation In Titanium Alloy Welded Using Pulse Wave Laser, MATERIALS SCIENCE FORUM, Scientific.net , 3, 8, ISSN:16629752
Said Ahmad, Erween Abd Rahim, Mohd Amri Lajis & Mohd Rasidi Ibrahim
(2017) Powder Mixed Dielectric In Electrical Discharge Machining Of Inconel 718, JOURNAL OF MECHANICAL ENGINEERING , Universiti Teknologi Mara , 10, 110, ISSN:18235514
Rd. Khairilhijra Khirotdin, Mohamad Izwan Saifudin Mohamad Zainuri, Afiqah Izzati Ishak, Nurhafizzah Hassan, Khairu Kamarudin, Mohd. Rasidi Ibrahim, Reazul Haq Abdul Haq, Mustafa Ibrahim, Nasuha Sau¿de, Omar Mohd. Faizan Marwah
(2017) Printing And Curing Of Conductive Ink Track On Fabric Using Syringe Deposition With Dlp Projector And Hot Plate, MATEC WEB OF CONFERENCE, MATEC WEB OF CONFERENCE , 11, 1, ISSN:2261236X
Rahim E.A., Amiril S. A. S., Mohid Z., Yahaya S. N. M.,Ibrahim M. R. and Shukuran M. F. M.
(2017) Study On Pulse Duration Of Supercritical Carbon Dioxide Coolant Delivery On Machining Performance Of Aisi 1045, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, Engineering Journal Publisher , 1, 2646 , ISSN:09754024
N. Hafizah Azis , M. Zulafif Rahim, Nasuha Sa¿ude, N. Rafai, M.S. Yusof, ALM Tobi, ZM Sharif, M. Rasidi Ibrahim, A.E Ismail
(2017) The Influence Of Injection Molding Parameter On Properties Of Thermally Conductive Plastic, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING JOURNAL, IOP Publishing , 6, 012018-1, ISSN:1757899X
DR MOHD RASIDI IBRAHIM
(2016) A Performance Of 2 Dimensional Ultrasonic Vibration Assisted Milling In Cutting Force Reduction, On Aluminium Al6061, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 9, 11124, ISSN:18196608
E. A. Rahim, N. M. Warap, Z. Mohid, M. R. Ibrahim and M. I. S. Ismail
(2016) A Prediction Of Laser Spot-To-Cutting Tool Distance In Laser Assisted Micro Milling Inconel 718, ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, Taylor Francis , 1, 529, ISSN:2374068X
E. A. Rahim, A. A. Rahim, M. R. Ibrahim, Z. Mohid
(2016) Performance Of Supercritical Carbon Dioxide (Scco2) As A Cutting Fluid In Machining Process, YMCAUST INTERNATIONAL JOURNAL OF RESEARCH, YMCAUST International Journal of Research , 1, 75, ISSN:23199377
E. A. Rahim, A. A. Rahim, M. R. Ibrahim and Z. Mohid
(2016) Performance Of Turning Operation By Using Supercritical Carbon Dioxide (Scco2) As A Cutting Fluid, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN Journals , 7, 8609, ISSN:18196608
M.R.IBRAHIM
(2015) Experimental Investigation Of Supercritical Carbon Dioxide (Scco2) Performance As A Sustainable Cooling Technique, PROCEDIA CIRP, ELSIVIER , 7, 351, ISSN:-
E. A. Rahim, N. M. Warap, Z. Mohid, R. Ibrahim and N. Rafai
(2015) Numerical Analysis Of Laser Preheating For Laser Assisted Micro Milling Of Inconel 718, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 7, 332, ISSN:16627482
R. IBRAHIM
(2014) Determination Of Heat Flux Intensity Distribution And Laser Absorption Rate Of Aisi D2 Tool Steel, APPLIEDMECHANICS AND MATERIALS VOL, Trans Tech Publications, Switzerland , 6, 730, ISSN:16627482
M. R. Ibrahim
(2014) Experimental Analysis On Ultrasonic Assisted Turning (Uat) Based On Innovated Tool Holder In The Scope Of Dry & Wet Machining, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication, Switzerland , 8, 104, ISSN:16609336
M.R.IBRAHIM
(2014) Experimental Investigation Od A Minimum Quantity Lubrication (Mql) As A Sustainable Cooling Technique, PROCEDIA CIRP, ELSIVIER , 6, 1, ISSN:2212827
E. A. Rahim, N. M. Warap, Z. Mohid, and R. Ibrahim
(2014) Investigation On Laser Assisted Micro Ball Milling Of Inconel 718, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 10, 79, ISSN:16627482
R.Ibrahim
(2014) Laser Assisted Micro-Groove Ball Milling Of Ti6a4v, APPLIED MECHANICS AND MATERIAL, Trans Tech Publication, Switzerland , 8, 55, ISSN:123456
Z. Mohid, N.M. Warap, R. Ibrahim, E. A. Rahim
(2014) Laser Assisted Micro-Groove Ball Milling Of Ti6al4v, APPLIED MECHANICS AND MATERIALS , Trans Tech Publications , 10, 55, ISSN:16627482
Z. Mohid, N. M. Warap, S. Hassan, M.I.S. Ismail, R. Ibrahim
(2014) Numerical Analysis Of Laser Heating For Laser Assisted Micro Milling Application, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications, Switzerland , 1, 720, ISSN:16609336
Rasidi Ibrahim
(2014) The Effect On The Application Of Coolant And Ultrasonic Vibration Assisted Micro-Milling On Machining Performance, APPLIED MECHANICS AND MATERIALS, Trans Tech Publication, Switzerland , 8, 65, ISSN:123456
Ibrahim, R
(2012) Study On Automatic Calibration System Of Multi-Layered Laminated Thin Film Thermocouple Cutting Temperature Sensor, ADVANCE MATERIAL RESEARCH, SCIENTIFIC .NET TRANS TECH PUBLICATION , 1, 3578, ISSN:10226680
Ibrahim, R.
(2012) Study On Automatic Calibration System Of Multi-Layered Laminated Thin Film Thermocouple Cutting Temperature Sensor, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 5, 3578, ISSN:10226680
Mohd Rasidi Bin Ibrahim
(2011) Design And Principle Of An Innovative Compliant Fast Tool Servo For Precisoin Engineering, MECHANICAL SCIENCES AN OPEN ACCESS JOURNAL FOR THEORETICAL AND APPLIED MECHANICS, Copernicus Publication Gmbh , 6, 139, ISSN:10.5194
Mohd Rasidi Bin Ibrahim
(2011) Investigation Of Size Effect On Burr Formation In Two Dimensional Vibration-Assisted Micro End Milling, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART B: JOURNAL OF ENGINEERING MANUFACTURE, SAGE JOURNALS , 9, 2032, ISSN:10.1177/09
Mohd Rasidi Bin Ibrahim
(2010) Design And Analysis Of A Desktop Micro-Machine For Vibration-Assisted Micromachining., PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART B: JOURNAL OF ENGINEERING MANUFACTURED, SAGE PUBLICATIONS , 8, 1377, ISSN:10.1177
Mohd Rasidi Bin Ibrahim
(2010) Experimental Study On Machine-Ability Improvement Of Hardened Tool Steel Using Two-Dimensional Vibration-Assisted Micro-End-Milling, INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTURE, ScienceDirect Elsevier , 10, 1115, ISSN:2010.08.01
Mohd Rasidi Bin Ibrahim
(2010) Study And Development Of A Kind Of Electric-Pneumatic Transfer Device With Piezoelectric Structure, IEEE, IEEE EXPLORE , 8, 96, ISSN:10.1109/CM
Media Digital
Siti Hawa Ruslan, Nur Hanis Mohammad Radzi, Rohaiza Hamdan, Zuhairiah Zainal Abidin, Mohd Rasidi Ibrahim, Rosli Omar dan Mohd Jahaya Kesot
(2021) Fkee Prihatin - Kempen Seorang Sekampit Beras (Kssb) 2.0 - Ks Fkee - Fkee - Uthm - Ogos 2021, YouTube , ISBN:-
Wahid bin Razzaly, Nik Hisyamudin bin Muhd Nor, Mohd Rasidi Bin Ibrahim Latifah Md Ariffin, Dr. Khadijah binti Md Ariffin
(2020) Uthm Bantu Golongan Kurang Berkemampuan, TV9 , ISBN:-
ASSOC. PROF TS. DR MOHD RASIDI IBRAHIM
(2019) Manufacturing Technology Uthm , Open Learning , ISBN:-
Prosiding / Seminar
Rahim E.A., Kamdani K., Yew C.J., Mohid Z., Ibrahim M.R., Wong C.K., Latif A.
(2021) Effect Of Cutting Tool Geometry On Machining Performance When End Milling Of Nickel Based Alloy Inconel 718, SPRINGER SCIENCE AND BUSINESS MEDIA DEUTSCHLAND GMBH , 319, ISBN:9789811595059
M.N. HANAFI, N.H RADZI, M.R IBRAHIM, M.S. MUSTAPA, N. A. HASSAN AND I.S. SEWITO
(2021) University Non-Resident Student Volunteerism In The New Normal Practice, STUDENT AFFAIRS UUM , 265, ISBN:9789672644408
Wijianto, Nadiatul Azwa, Aishah Ahmad, Rasidi Ibrahim, Nor Azah Samsudin, Norman Mohamad
(2020) The Analysis And Implementation Of Remote Production Monitoring System In Manufacturing Industries, INTERNATIONAL JOURNAL OF ENGINEERING RESEARCH AND TECHNOLOGY , 5379, ISBN:09743154
R. Aliyu, A. M. T. Arifin, R. H. A. Haq, M. F. Hassan, M. N. A. Rahman, A. E. Ismail, M. Z. Rahim, M. R. Ibrahim, M. A. Azlan, M. S. Ahmad, I. Taib & R. Ismail
(2019) An Integration Of Kano Model And Quality Function Deployment Technique - A Case Study Using Sport Earphone, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Tatang Mulyana, Rasidi Ibrahim, Erween Abd Rahim
(2019) Development And Analysis Of Programmable Logic Controller Program For Defect Detection Prototype By Cx Programmer, IOP JOURNAL OF PHYSIC , 1, ISBN:17426596
M F Hassan, K H Mazalan, M N A Rahman, A E Ismail, M R Ibrahim, M Z Rahim and M F Ahmad
(2019) Kano Model And Weighted Rating Evaluation Method For Product Lifecycle Improvement, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
S Kuddus, MS Mustapa, MR Ibrahim, S Shamsudin, MA Lajis, A Wagiman
(2019) Physical Characteristics Of Solid State Recycled Aluminum Chip Aa6061 Reinforced With Silicon Carbide (Sic) By Using Hot Extrusion Technique, IOP PUBLISHING , 1, ISBN:17426588
RASIDI IBRAHIM
(2018) An Investigation Of Finite Element Analysis (Fea) On Piezoelectric Compliance In Ultrasonic Vibration Assisted Milling (Uvam), MATEC WEB OF CONFERENCES , 1, ISBN:2261236X
M.A. Haikal Ahmad, M. Zulafif Rahim, M. F. Mohd Fauzi, Aslam Abdullah, Z Omar, Songlin Ding, A.E Ismail, and M. Rasidi Ibrahim
(2018) Catalytic Aided Electrical Discharge Machining Of Polycrystalline Diamond - Parameter Analysis Of Finishing Condition, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
Amin, M. H. M., Arifin, A. M. T., Hassan, M. F., Haq, R. H. A., Rahman, M. N. A., Ismail, A. E., Rahim, M. Z., Ibrahim, M. R., Yunos, M. Z., Ismail, R.
(2017) An Evaluation Of Mechanical Properties On Kenaf Natural Fiber/Polyester Composite Structures As Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426596
Mohd Rasidi Ibrahim, Zulafif Rahim, Erween Rahim, Latif Tobi, Kai Cheng, Hui Ding
(2017) An Experimental Investigation Of Cutting Temperature And Tool Wear In 2 Dimensional Ultrasonic Vibrations Assisted Micro-Milling, EDP Sciences , 1, ISBN:2261236X
MOHD FAHRUL HASSAN, SUHADA JUSOH, MUHAMAD ZAINI YUNOS, A M T ARIFIN, A E ISMAIL, M RASIDI IBRAHIM AND M ZULAFIF RAHIM
(2017) Application Of Design For Six Sigma Methodology On Portable Water Filter That Uses Membrane Filtration System: A Preliminary Study, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
A.E Ismail, M.Q Abdul Rahman, M.Z Mohd Ghazali, M. Zulafif Rahim, M. Rasidi Ibrahim, Mohd Fahrul Hassan, Nik Hisyamudin Muhd Nor, A.M.T Ariffin, Muhamad Zaini Yunos
(2017) Combined Mode I Stress Intensity Factors Of Slanted Cracks, INSTITUTE OF PHYSICS PUBLISHING , 012011, ISBN:17578981
MOHD FAHRUL HASSAN, MOHD FAIZ AFHAM, AHMAD MUBARAK TAJUL ARIFIN, AL EMRAN ISMAIL, MOHD RASIDI IBRAHIM, MOHAMMAD ZULAFIF RAHIM, MD FAUZI AHMAD
(2017) Design And Development Of A Portable Metal Chip Baler Using A System Design Approach, EDP SCIENCES , 1, ISBN:2261236X
Bin Ibrahim, M. R
(2017) Design Selection Of In-Uvat Using Matlab Fuzzy Logic Toolbox, Springer Verlag , 538, ISBN:978331951281554
M. Rasidi Ibrahim, Fahrul Hasssan, Mubarak Ariffin,
(2017) Effect Of Feed Rate And Depth Of Cut On Cutting Forces And Surface Roughness When End Milling Of Mild Steel Using Noviano Cutting Tool, IEOM Society , 1777, ISBN: 9780985549763
A.M.T. Arifin, M. Fahrul Hassan, A.E. Ismail, M. Zulafif Rahim, M. Rasidi Ibrahim, R.H. Abdul Haq, M.N.A. Rahman, M.Z. Yunos, M.H.M. Amin
(2017) Investigation On Suitability Of Natural Fibre As Replacement Material For Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
Muhammad Irfan Ab Kadir, Mohammad Sukri Mustapa, Mohd Rasidi Ibrahim, Mohd Arif Samsi, and Ahmed Sahib Mahdi
(2017) Microstructures And Characteristics Of Solid State Recycling Aluminium Chips Aa6061/Al-Sic Composites Fabricated By Cold Compaction Method, American Institute of Physics Inc. , 200, ISBN:0094243X
RACHMAT, H. , IBRAHIM, M. R. , HASSAN, S.
(2017) Prelimenary Investigation Of Parametric Optimization On Turning Process Using Uvat Tool Holder Based On Taguchi Method, EDP SCIENCES , 1234, ISBN:2261236X
Mohd Fahrul Hassan, M.R.A. Rahman , A.M.T. Arifin, A.E. Ismail, M. Rasidi Ibrahim, M. Zulafif Rahim, Md Fauzi Ahmad
(2017) Preliminary Study On Kano Model In The Conceptual Design Activities For Product Lifecycle Improvement, Institute of Physics Publishing , 1, ISBN:17578981
M. Zulafif Rahim, M. S. Yusof, E. A. Rahim, Rasidi Ibrahim, and Z. Mohid
(2017) Wire-Cut Edm Of Sisic-Preliminary Investigation In Machining Parameter, American Institute of Physics , 020052-1, ISBN:978-0-7354-1499
E. A. Rahim, A. A. Rahim, M. R. Ibrahim, Z. Mohid,
(2016) Experimental Investigation Of Supercritical Carbon Dioxide (Scco2) Performance As A Sustainable Cooling Technique, Elsevier , 637 , ISBN:22128271
Saiful Anwar Che Ghani, Wan Sharuzi Wan Harun, Fadzil Faisae Ab. Rashid and Rasidi Ibrahim
(2016) Numerical Analysis Of Internal Flow Embedded In A Cutting Tool, ARPN Journal of Engineering and Applied Sciences online , 1 , ISBN:1819-6608
Rasidi Ibrahim, Noor Hakim Rafai, Erween Abd. Rahim, Kai Cheng and Hui Ding
(2015) A Study Of Tool Motion In 2 Dimensional Ultrasonic Assisted Micro-Milling, Trans Tech Publications, Switzerland , 328, ISBN:16627482
I. Rasidi
(2015) An Investigation Of Cutting Mechanics In 2 Dimensional Ultrasonic Vibration Assisted Milling Toward Chip Thickness And Chip Formation, IOP Conference Series , ISBN:17578981
I Rasidi, N H Rafai, E A Rahim, S A Kamaruddin, H Ding and K Cheng
(2015) An Investigation Of Cutting Mechanics In 2 Dimensional Ultrasonic Vibration Assisted Milling Toward Chip Thickness And Chip Formation. , IOP SCIENCE , 012057, ISBN:1757899X
E. A. RAHIM, M. R. IBRAHIM, A. A. RAHIM, S. AZIZ1, Z. MOHID
(2015) Experimental Investigation Of Minimum Quantity Lubrication (Mql) As A Sustainable Cooling Technique, ELSEVIER , 351, ISBN:22128271
R. IBRAHIM
(2014) A Prediction Of Laser Beam-To-Cutting Tool In Laser Assisted Micro Milling Of Hardened Steel, 9th International Conference on MicroManufacturing (ICOMM 2014)
M. R Ibrahim
(2014) Experimental Analysis On Ultrasonic Assisted Turning (Uat) Based On Innovated Tool Holder In The Scope Of Dry &Wet Machining, Scientific.net
M. R Ibrahim,Sabariah Musa
(2014) Intelligent Rainwater Harvesting System For Water Management Of Uthm Tun Dr Ismail Residential College, SPARK
R. Ibrahim
(2014) Investigation On Laser Assisted Micro Ball Milling Of Inconel 718, Applied Mechanics and Material. Vol.660. pp 79-83
R. Ibrahim
(2014) The Effect Of Cutting Fluid And Ultrasonic Vibration Assisted Micro Milling On Machining Performance, Scientific.net
RASIDI Ibrahim, E. A. RAHIM, A.`A. IBRAHIM, N. A. MASKAM, S.C.GHANI
(2014) The Effect On The Application Of Coolant And Ultrasonic Vibration Assisted Micro Milling On Machining Performance. , TRANS TECH PUBLICATIONS , 65, ISBN:16609336
R. Ibrhaim
(2013) A Method Of Tool Engagement Temperature Estimation On Laser Assisted Micro-Milling, JSME , -, ISBN:-
R. Ibrahim
(2013) Theoretical Models, Instrumental Implementation And Pleminary Result Of Ultrasonic Assisted Turning, Japan Society of Mechanical Engineers , -, ISBN:-
Mohd Rasidi Bin Ibrahim
(2010) Surface Roughness Optimisation In Vibration Assisted Micro-Milling Of Aluminium T6061 Using Response Surface Method, CAPE conference Publisher
Mohd Rasidi Bin Ibrahim
(2007) Vibration Assisted Micro-Milling: Theoretical Models And Instrumental Implementation, Springer Publication

ID/CODEPROJECTCLIENTSTART DATEEND DATE
PS095 CONSULTATION ON PERFORMANCE STUDY ON LUBBERING GUN FOR CSK DRILLING SPIRIT AEROSYSTEMS MALAYSIA SDN BHD 20/05/2018 20/07/2018
PS124 Consultation On Performance Study On Lubbering Gun For Csk Drilling Spirit Aerosystems Sdn Bhd 15/05/2018 31/07/2017

YearDescriptionLevel
2021 Chairman for Pengurus Pasukan Silat Negeri Johor Persatuan Silat Cekak Harimau, Pertubuhan Silat Cekak Harimau Malaysia, Malaysia, January 2021 National

YearDescription
2022 Co-Supervisor for Ahmad Shahrul Nizam Bin Mohamed Rani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Abdul Hanan Bin Abdul Aziz, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Asmin Bin Mandja, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Mohd Fuad Bin Majid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Muhamad Zulrahman Bin Asmurad, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Muhammad Aliff Syahin Bin Mohd Amram, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Nur Alia Binti Md Asri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Ra Note A/L Som Teb, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Salik Syahid Bin Md Saad, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Examiner for Vallerry Anak Ramlee, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Industrial Training Supervisor for Danial Iskandar Bin Zainudin, Perodua Engine Manufacturing Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Muhammad Hafiz Haikal Bin Razali, Srw Holding Sdn Bhd, 2022
2022 Industrial Training Supervisor for Muhammad Imran Bin Anuar, Srw Holding Sdn Bhd, 2022
2022 Industrial Training Supervisor for Muhammad Taufiq Bin Kamaruddin, Soil Instruments (M) Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Muhammad Thaqif Afiq Bin Zaini, Eternal Engineering Sdn Bhd, 2022
2022 Industrial Training Supervisor for Muhammad Yusuf Bin Yaacob, Srw Holding Sdn Bhd, 2022
2022 Industrial Training Supervisor for Munqiz Bin Md Nor, Sa Caliph Enterprise, 2022
2022 Industrial Training Supervisor for Nik Muhammad Jafni Bin Jamaludin, Tiger Shoji Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nur Amira Natasha Binti Mohamed Faizan, Solar Alert Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nur Syazwani Binti Saidain @ Saidin, Asia Propel Sdn Bhd, 2022
2022 Industrial Training Supervisor for Nurul Ashikin Binti Radzali, Perodua Engine Manufacturing Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Nurul Nabilah Binti Aminuddin, Smart Meters Technologies (M) Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Nurul Syafiqah Binti Mohd Zahel, Fuzi Dream Furniture Industries Sdn Bhd, 2022
2022 Industrial Training Supervisor for Puganraj A/L Paramjothi, Sunchirin Industries (Malaysia) Berhad, 2022
2022 Industrial Training Supervisor for Shahrizal Bin Saidin, Ichor Systems Malaysia Sdn Bhd, 2022
2022 Industrial Training Supervisor for Sivanesan A/L Selvan, Sunchirin Industries (Malaysia) Berhad, 2022
2022 Industrial Training Supervisor for Venothanaraj A/L Nagarajan, Ika Works (Asia) Sdn. Bhd., 2022
2022 Industrial Training Supervisor for Zahin Zikry Bin Mohamad, Srw Holding Sdn Bhd, 2022
2022 Supervisor for Ahmad Faridz Ikhwan Bin Ridzwan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Muhammad Hadrami Bin Zainoridin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Nurhasya Binti Sofian Nor, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2022
2022 Supervisor for Nurul Ashikin Binti Radzali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2022
2021 Examiner for Ariff Naqiudin Bin Shaharudin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Ariff Naqiudin Bin Shaharudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Asmin Bin Mandja, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Lisa Yasmine Binti Mohd Shariff, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mah Wei Chun, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mah Wei Chun, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Mohd Fuad Bin Majid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Aliff Syahin Bin Mohd Amram, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Amir Raauf Bin Abdul Rashid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Asyraf Bin Mohd. Nazman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Nur Imran Bin Noorfaizan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Muhammad Zulhanif Bin Zulkafle, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Norliana Binti Ahmad Sukri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Salik Syahid Bin Md Saad, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Thayalan A/L Tiarasan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Vallerry Anak Ramlee, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Vallerry Anak Ramlee, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Examiner for Wu Shunfann, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Main Supervisor for Aishah Binti Ahmad, MSc, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Agung Arya Nusa, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Ahmad Faridz Ikhwan Bin Ridzwan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Junlloyd Egano, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Mior Farhansyamil Bin Mior Shaharuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Mohammed Edhah Mubarak Ba Hamid, Master's Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Mohd Azrin Bin Ibrahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Mohd Azrin Bin Ibrahim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhammad Amar Imran Bin Azman, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhammad Hadrami Bin Zainoridin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Muhammad Izzat Bin Iskandar Dzaulkornain, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Nuraqilah Nazihah Binti Abas, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Nurhasya Binti Sofian Nor, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2021
2021 Supervisor for Yongga Primadana, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2021
2020 Examiner for Ahmad I'Rfan Nazhan Bin Ishak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Amar Bin Amir Hamzah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Amar Bin Amir Hamzah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Lisa Yasmine Binti Mohd Shariff, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Mohamad Aiman Haikal Bin Mohd Zani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Mohamad Aiman Haikal Bin Mohd Zani, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Mohamad Syazani Bin Hamzah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Mohamad Syazani Bin Hamzah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Amir Raauf Bin Abdul Rashid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Asyraf Bin Mohd. Nazman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Hazamuddin Bin Mohd Kassim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Ikhwanuddin Bin K.Samsudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Muhammad Zulhanif Bin Zulkafle, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Norliana Binti Ahmad Sukri, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Siti Nor Azwa Binti Samsuddin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Thayalan A/L Tiarasan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Examiner for Wu Shunfann, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Main Supervisor for Mohammed Edhah Mubarak Ba Hamid, MSc, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Brandon Lau Wei, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Junlloyd Egano, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Mior Farhansyamil Bin Mior Shaharuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Mohammed Edhah Mubarak Ba Hamid, Master's Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Amar Imran Bin Azman, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Faiz Bin Razali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Muhammad Izzat Bin Iskandar Dzaulkornain, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Nadiatul Haikal Azwa Binti Pamgo, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Nuraqilah Nazihah Binti Abas, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2020
2020 Supervisor for Nuraqilah Nazihah Binti Abas, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2020
2019 Examiner for Ahmad I'Rfan Nazhan Bin Ishak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Ahmad Kasyfil Wafi Bin Ahmad Najib, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Aiman Hakim Bin A.Manap, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Lim Yu Heng, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Lim Yu Heng, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhamad Akif Bin Abd Latif, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhammad Faizal Bin Jaafar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Muhammad Ikhwanuddin Bin K.Samsudin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Narendraan Rao A/L Subbarao, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Narendraan Rao A/L Subbarao, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nur Ismaliza Binti Ismail, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nur Ismaliza Binti Ismail, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Nur Shyhira Binti Jaffar Ludin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Siti Nor Azwa Binti Samsuddin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Sugan A/L Nagarajan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Examiner for Syahirah Azua Binti A Khalid, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Industrial Training Supervisor for Damien Tung Jia Jun, Kossan Latex Industries (M) Sdn. Bhd, 2019
2019 Industrial Training Supervisor for Iqbal Hanafi Bin Abd Rahim, Northport (M) Berhad, 2019
2019 Industrial Training Supervisor for Muhamad Misha Bin Shahruzzaman, Fgv Bulkers Sdn Bhd, 2019
2019 Industrial Training Supervisor for Muhammad Aidil Hakim Bin Kamsol, Advance Boilers, 2019
2019 Industrial Training Supervisor for Muhammad Arshil Azim Bin Mohd. Yusof, Sumisaujana Tcm Chemicals Sdn. Bhd., 2019
2019 Industrial Training Supervisor for Muhammad Firdaus Bin Ahmad Daud, Amsteel Mills Sdn Bhd, 2019
2019 Industrial Training Supervisor for Muhammad Hafizi Bin Husaini, Mah Sing Plastics Industries Sdn Bhd, 2019
2019 Industrial Training Supervisor for Muhammad Izzuddin Bin Sohaimi, Rkt Ventures Sdn Bhd, 2019
2019 Industrial Training Supervisor for Muhammad Rafki Bin Zulmi, Sime Darby Research Sdn. Bhd., 2019
2019 Industrial Training Supervisor for Nisshantan A/L Ulaghanathan, C.S. Yap Metalparts Industries Sdn. Bhd, 2019
2019 Industrial Training Supervisor for Robin A/L Rajendran, Top Glove Sdn. Bhd, 2019
2019 Industrial Training Supervisor for Toh Yee Chern, Kossan Rubber Industries Bhd, 2019
2019 Supervisor for Ahmad Hanafi Bin A Manan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Brandon Lau Wei, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Fadrul Ashraf Bin Anuar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Khairul Anas Bin Abdollah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Muhamad Afiq Bin Hamidi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Muhammad Fauzani Bin Abd Aziz, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Nadiatul Haikal Azwa Binti Pamgo, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Sofreezan Shaufi Bin Soprudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Syafiq Haikal Sukaimi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2019
2019 Supervisor for Syafiq Haikal Sukaimi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2019
2018 Examiner for Ahmad Kasyfil Wafi Bin Ahmad Najib, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Ahmad Sabree Bin Abdul Basit, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Aiman Hakim Bin A.Manap, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Amirin Sofi Bin Rahaimay, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Fong Wai Song, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Fong Wai Song, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Jeffrey Bin Muhammad Ikhwan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohamad Faris Hakimi Bin Ramli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Mohammad Azlee Addirul Bin Abu Zaki, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhamad Akif Bin Abd Latif, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Amin Bin Rosnan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Aminuddin Bin Zaidi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Muhammad Faizal Bin Jaafar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Nur Adzlisham Bin Hamzah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Nur Adzlisham Bin Hamzah, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Nur Shyhira Binti Jaffar Ludin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Sharmilah Binti Tony, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Shirlyvia Sheren Grita, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Sugan A/L Nagarajan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Syahirah Azua Binti A Khalid, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Thanagesan A/L K Nagarajah, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Examiner for Umar Bin Abd Ghani, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Industrial Training Supervisor for Ahmad Hafizzuddin Bin Ahmad Nazri, Flowserve Pte Ltd, 2018
2018 Industrial Training Supervisor for Amirul Fahmie Bin Zainal, Kaneka (Malaysia) Sdn Bhd, 2018
2018 Industrial Training Supervisor for Fadrul Ashraf Bin Anuar, Politeknik Sultan Haji Ahmad Shah, 2018
2018 Industrial Training Supervisor for Mohamad Fariez Bin Abd Satar, Felda Palm Industries Sdn Bhd, 2018
2018 Industrial Training Supervisor for Mohamad Nurr Firdauss Bin Mohamed, Hicom Automotive Manufacturers ( Malaysia ) Sdn Bhd, 2018
2018 Industrial Training Supervisor for Mohd Hadi Hakimy Bin Omar, Petronas Chemicals Mtbe Sdn Bhd, 2018
2018 Industrial Training Supervisor for Muhamad Imran Bin Ab.Rahman, Pusat Latihan Teknologi Tinggi(Adtec), 2018
2018 Industrial Training Supervisor for Muhammad Amir Zafran Bin Saipul Anuar, Petronas Gas Berhad, 2018
2018 Industrial Training Supervisor for Muhammad Bin Azman, Advance Pact Sdn. Bhd., 2018
2018 Industrial Training Supervisor for Muhammad Fadhilrulrahman Bin Abd Razak, Pusat Latihan Teknologi Tinggi(Adtec), 2018
2018 Industrial Training Supervisor for Muhammad Nur Aliff Bin Ismail, D-Za Jaya Enterprise, 2018
2018 Industrial Training Supervisor for Wan Mohd. Najmi Bin Wan Ibrahim, Jabatan Kerja Raya, 2018
2018 Main Supervisor for Chong Bin Hong, MSc, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Ahmad Hanafi Bin A Manan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Chong Bin Hong, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Fadrul Ashraf Bin Anuar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Kee Hem Ming, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Muhamad Afiq Bin Hamidi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Muhammad Fauzani Bin Abd Aziz, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Muhammad Fauzani Bin Abd Aziz, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Ng Chee Yung, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Sofreezan Shaufi Bin Soprudin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2018
2018 Supervisor for Sofreezan Shaufi Bin Soprudin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2018
2017 Co-supervisor for Budi Sulistyo, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Co-supervisor for Sri Widaningrum, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Ahmad Safwan Bin Abdul Razak, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Firzanzani Bin Rosli, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Lai Wei Pin, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Logeswaran A/L Pachaiyappan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for M Yoggaraj A/L Muthusamy, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Muhamad Akif Bin Abd Latif, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nik Nazirul Mubin Bin Nik Pauzi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Examiner for Nur Hidayah Binti Salim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Industrial Training Supervisor for A.Sharomfazree Salleh Bin Haji A Suhaimi, Afjets Sdn Bhd, 2017
2017 Industrial Training Supervisor for Chan Zhi Hui, Hpmt Industries Sdn Bhd, 2017
2017 Industrial Training Supervisor for Chong Bin Hong, Hpmt Industries Sdn Bhd, 2017
2017 Industrial Training Supervisor for Fakhrul Amri Bin Harun, Jkr Cawangan Kejuruteraan Mekanikal Negeri Selangor, 2017
2017 Industrial Training Supervisor for Kee Hem Ming, Hpmt Industries Sdn Bhd, 2017
2017 Industrial Training Supervisor for Lau Ka Hong, Vantage Steel Works Sdn Bhd, 2017
2017 Industrial Training Supervisor for Lim Chang Chu, Hpmt Industries Sdn Bhd, 2017
2017 Industrial Training Supervisor for Muhamad Ikram Fikri Bin Mohd Amizan, Deltaspec (M) Sdn Bhd, 2017
2017 Industrial Training Supervisor for Muhammad Dzulfarhi Bin Ahmad, Prodana Wawasan Consulting Engineers Sdn. Bhd., 2017
2017 Industrial Training Supervisor for Muhammad Fauzani Bin Abd Aziz, Majlis Bandaraya Shah Alam, 2017
2017 Industrial Training Supervisor for Muhammad Syahmi Bin Pazami, Automotive Industries Sdn. Bhd., 2017
2017 Industrial Training Supervisor for Nik Faris Fikrie Bin Nik Mohd Kamil, Mtc Engineering Sdn Bhd, 2017
2017 Industrial Training Supervisor for Norsahidah Binti Abdullah, Besi Apac Sdn Bhd, 2017
2017 Industrial Training Supervisor for Siti Hajar Binti Saimi, Besi Apac Sdn Bhd, 2017
2017 Industrial Training Supervisor for Tengku Irfan Shah Bin Raja Abdul Razak, Service Master (M) Sdn Bhd, 2017
2017 Main Supervisor for Rino Andias Anugraha, PhD, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Chong Bin Hong, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Kee Hem Ming, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Mohamed Haiyazudeen Bin Mohamed Ibrahim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Muhammad Fauzani Bin Abd Aziz, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Ng Chee Yung, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Nur Anis Binti Mohamad Radzi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Siti Zulaiha Binti Ahmad Kasmir, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2017
2017 Supervisor for Siti Zulaiha Binti Ahmad Kasmir, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2017
2016 Co-supervisor for Ainaa Mardhiah Binti Sabri, MSc, Universiti Tun Hussein Onn Malaysia, 2016
2016 Co-supervisor for Suriyanti Binti Kuddus, MSc, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Ahmad Safwan Bin Abdul Razak, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Ganaswaran A/L Segar, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Ganaswaran A/L Segar, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Hazlin Syafinaz Binti Md.Razali, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Hazlin Syafinaz Binti Md.Razali, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Lai Wei Pin, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Muhamad Akif Bin Abd Latif, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Muhamad Amir Hafiz Bin Abdul Halim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Examiner for Muhamad Amir Hafiz Bin Abdul Halim, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Industrial Training Supervisor for Abdul Muhaimin Bin Abu Bakar, Kejuruteraan Elmek Sdn. Bhd, 2016
2016 Industrial Training Supervisor for Afifah Binti Ramli, Lembaga Air Perak (Taiping), 2016
2016 Industrial Training Supervisor for Firzanzani Bin Rosli, Uac Berhad, 2016
2016 Industrial Training Supervisor for Hazlin Syafinaz Binti Md.Razali, Lembaga Air Perak (Taiping), 2016
2016 Industrial Training Supervisor for Lee Shee Yao, Khi Casting Industries Sdn Bhd, 2016
2016 Industrial Training Supervisor for Mohamed Haiyazudeen Bin Mohamed Ibrahim, Pejabat Jurutera Daerah, 2016
2016 Industrial Training Supervisor for Muhammad Syafiq Bin Husaini, Comfort Rubber Gloves Industries Sdn. Bhd., 2016
2016 Industrial Training Supervisor for Muhammad Zamir Bin Sumri, Uac Berhad, 2016
2016 Industrial Training Supervisor for Nor Amira Binti Ahmad Zamli, Acme Ferrite Products Sdn. Bhd., 2016
2016 Industrial Training Supervisor for Norhafizah Binti Abd Azis, Teleflex Medical Sdn Bhd, 2016
2016 Industrial Training Supervisor for Raja Mohamad Arif Bin Raja Zainalabidin, Acme Ferrite Products Sdn. Bhd., 2016
2016 Main Supervisor for Abdul Afiff Fiqhry Bin Abdul Latif, MSc, Universiti Tun Hussein Onn Malaysia, 2016
2016 Main Supervisor for Charles Prakash A/L Edward Peter, PhD, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Ahmad Zahid Bin Amran, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Ahmad Zahid Bin Amran, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Mohamed Haiyazudeen Bin Mohamed Ibrahim, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Noor Awatif Binti Mohd Basri, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Nur Anis Binti Mohamad Radzi, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Nurul Najah Binti Mahadi, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Tharmaraj A/L Sreedharan, Bachelor Degree Project 1, Universiti Tun Hussein Onn Malaysia, 2016
2016 Supervisor for Tharmaraj A/L Sreedharan, Bachelor Degree Project 2, Universiti Tun Hussein Onn Malaysia, 2016
2015 Co-supervisor for Haris Rachmat Bin Asep Rachmat, PhD, Universiti Tun Hussein Onn Malaysia, 2015
2015 Main Supervisor for Haris Rachmat Bin Asep Rachmat, PhD, Universiti Tun Hussein Onn Malaysia, 2015
2013 Main Supervisor for Azizul Azdwan Bin Rahim, MSc, Universiti Tun Hussein Onn Malaysia, 2013
2012 Co-supervisor for Mariah Binti Shahrudin, MSc, Universiti Tun Hussein Onn Malaysia, 2012
2012 Co-supervisor for Norazlan Bin Warap, PhD, Universiti Tun Hussein Onn Malaysia, 2012
2012 Co-supervisor for Zazuli Bin Mohid, PhD, Universiti Tun Hussein Onn Malaysia, 2012

YearDescription
Organiser / Venue
Date
2022 12TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2022
FKMP,UTHM / Online Conference
09/08/2022 - 10/08/2022
2022 BENGKEL KREATIVITI GITAR PENCETUS LAGU BERSAMA KOMPOSER L.Y.
UTHM / PUSAT KEBUDAYAAN UNIVERSITI / STUDIO PENDIDIKAN FPTV
14/06/2022 - 15/06/2022
2022 ADVANCED TEACHING TECHNOLOGY SERIES. SERIES 1: 3D PRINTING INTENSIVE COURSE
LAIN-LAIN / BLOK E10, UTHM, 86400 Parit Raja, Batu Pahat, Johor
24/04/2022 - 25/04/2022
2022 KURSUS OPEN JOURNAL SYSTEM SIRI 1/2022
UTHM / ONLINE
16/03/2022
2022 BENGKEL MESIN CNC SURFACE GRINDING
FKMP,UTHM / Makmal Pembuatan Deras, FKMP, UTHM
06/03/2022 - 07/03/2022
2022 PROGRAM BUAL BICARA STAF FKMP BERSAMA DATO' SRI IBRAHIM B.AHMAD- LEMBAGA PENGARAH UTHM SECARA HIBRID
FKMP,UTHM / YOUTUBE (HIBRID)
26/01/2022
2022 BENGKEL PEMURNIAN CARTA FUNGSI KOLEJ KEDIAMAN UTHM
UTHM / DEWAN AKTIVITI KOLEJ KEDIAMAN TUN FATIMAH
13/01/2022
2021 BENGKEL PEMURNIAN BUKU PERATURAN KOLEJ KEDIAMAN PELAJAR UTHM
UTHM / TROVE HOTEL JOHOR BAHRU
02/12/2021 - 04/12/2021
2021 UAS PILOT TRAINING COURSE (ONLINE)
LAIN-LAIN / ONLINE COURSE
29/09/2021 - 30/09/2021
2021 BENGKEL PENARAFAN JURNAL
UTHM / GOOGLE MEET
27/09/2021
2021 ICON TALK - MENDEPANI DAN MEMERANGI KRISIS DEMI KELANGSUNGAN NEGARA : RASUAH, COVID-19 & EKONOMI BERSAMA YBHG. DATO' DR. HUSSAMUDDIN HJ YAACUB, PENGERUSI KUMPULAN MEDIA KARANGKRAF
UTHM / APLIKASI ZOOM
04/08/2021
2021 WEBINAR BICARA UNDANG - UNDANG SIRI 5
UTHM / ZOOM
19/07/2021
2021 BENGKEL LATIHAN PANEL PENILAI APEL.A TAHAP 7
UTHM / DALAM TALIAN - GOOGLE MEET
14/06/2021
2021 KURSUS ADOBE INDESIGN AND MANAGING PDF FILES
UTHM / Secara dalam talian: Zoom Meeting
12/04/2021
2021 SESI PERKONGSIAN SKIM PEMBANGUNAN POTENSI STAF
UTHM / Google Meet
21/03/2021
2021 PROGRAM TAZKIRAH DHUHA
UTHM / Platform : Google Meet - https://meet.google.com/ijm-msgz-eji
04/02/2021
2021 KURSUS PENGENALAN NARKOTIK
PEJABAT PENDAFTAR,UTHM / GOOGLE MEET
03/02/2021
2021 PROGRAM BUAL BICARA MYFKMP 2.0: PROSES DAN SISTEM KENAIKAN PANGKAT STAF AKADEMIK UTHM 2022
FKMP,UTHM / ZOOM
27/01/2021
2021 JERAYAWARA KRITERIA BAHARU PENILAIAN PRESTASI TAHUNAN & KENAIKAN PANGKAT STAF AKADEMIK UTHM BERSAMA FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
PEJABAT PENDAFTAR,UTHM / GOOGLE MEET
05/01/2021
2020 SESI LIBAT URUS YBHG PENGERUSI LPU BERSAMA KEPIMPINAN HEPA UTHM
UTHM / -
19/11/2020
2020 AUTHOR UTHM ACADEMIC ONLINE RESOURCE (REPEAT SESSION)
UTHM / PUSAT PEMBELAJARAN ATAS TALIAN TAHAP GLOBAL
08/09/2020
2020 TAKLIMAT PELAKSANAAN INISIATIF WORK FROM HOME (WFH) MENGGUNAKAN APLIKASI WORKSPACE UTHM SIRI 10
UTHM / -
18/05/2020
2020 HOW TO USE EASYCHAIR FOR MANUSCRIPT SUBMISSION AND MANAGEMENT
UTHM / UTHM
19/02/2020
2020 SHARING IS CARING: PELUANG KOLABORASI PENYELIDIKAN BERSAMA INDUSTRI PEMBUATAN PESAWAT
UTHM / UTHM
02/02/2020
2019 KURSUS PERANCANGAN, PENGURUSAN DAN PEMIKIRAN STRATEGIK
UTHM / BILIK LESTARI 2 PTTA
10/09/2019 - 11/09/2019
2019 POWER WALK & PLOGGING
UTHM / KOLEJ KEDIAMAN PERWIRA (PUSAT SUKAN & HEPA)
28/08/2019
2019 KURSUS KECERGASAN EKSEKUTIF
UTHM / PUMAS
31/07/2019 - 01/08/2019
2019 TAKLIMAT E-REPORT DAN ETESIS & JERAYAWARA CGOL 2019
UTHM / UTHM
24/07/2019
2019 TALK SERIES : CHARTERED ENGINEER - IMECHE
UTHM / UTHM
23/04/2019
2019 KURSUS SIRIM CERTIFIED AEROSPACE MANAGEMENT SYSTEM PROFESSIONAL SIRI II
UTHM / UTHM
07/04/2019 - 09/04/2019
2019 ROUTE TO MEIM/PROFESIONAL ENGINEER (PE)
UTHM / UTHM
19/03/2019
2019 GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)
IME CAD / CAM TRAINING CENTRE / IME CADCAM Training Centre Sdn Bhd (Petaling Jaya)
11/03/2019 - 13/03/2019
2019 KURSUS AS9100D : 2016 (AQMS)
UTHM / PTTA UTHM
10/02/2019 - 14/02/2019
2019 PERHIMPUNAN BULANAN WARGA HEPA JAN 2019
UTHM / DTMI
31/01/2019

ID IPTITTLE PRODUCTTYPE OF IP NO. APPLICATIONROLE
PT167 Ultrasonic Vibration Assisted Milling (Compiance Mechanism) Paten (Patent) PI2017704762 PEMILIK/PENYELIDIK UTAMA
PT141 Supercritical Carbom Dioxide (SCCO2) Cutting Fluid Dispensing sysetm for cooling process in Machining Process Application Paten (Patent) PI2016702964 PEREKA CIPTA/PENYELIDIK BERSAMA

EXHIBITION ID PRODUCT TITTLE EXPO NAME RECOGNITION
16SIIF02 The innovation of ultrasonic assisted machine. SIIF 2016 Emas dan Setara
16SIIF03 Super critical carbon dioxide (SCCO2) cooling system for machining process. SIIF 2016 Perak dan Setara
16ITEX06 The innovation of ultrasonic vibration machining device ITEX 2016 Emas dan Setara
16ITEX03 Super critical carbon dioxide (SCCO2) cooling system for machining process ITEX 2016 Emas dan Setara

TAHUN NAMA ANUGERAH / PENCAPAIAN PENGANUGERAH PERINGKAT
2016 SILVER PRIZE
SILVER
KOREA INVENTION PROMOTION ASSOCIATIONANTARABANGSA
2016 INNOVATION & TECHNOLOGY EXHIBITION-GOLD MEDAL
GOLD
MALAYSIAN INVENTION AND DESIGN SOCIETYANTARABANGSA
2016 GOLD PRIZE
GOLD
KOREA INVENTION PROMOTION ASSOCIATIONANTARABANGSA
2016 BEST PRESENTATION AWARD
BEST AWARD
INTERNATIONAL ACADEMY OF COMPUTER TECH.ANTARABANGSA
2016 ANUGERAH PERKHIDMATAN CEMERLANGUTHMUNIVERSITI
2016 ANUGERAH JASA BAKTI UTHMUNIVERSITI
2015 RESEARCH AND INNOVATION FESTIVAL-PRESENTER UTHMUNIVERSITI
2015 RESEARCH AND INNOVATION FESTIVAL-BEST PAPER GOLD MEDAL
GOLD
UTHMUNIVERSITI
2015 RESEARCH AND INNOVATION FESTIVAL-BEST PAPER GOLD MEDAL
BEST PAPER
UTHMUNIVERSITI
2015 BEST PAPER AWARD
BEST PAPER
UMPANTARABANGSA