Staff Profile

Full NameTs. Dr. REAZUL HAQ BIN ABDUL HAQ
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN PEMBUATAN DAN INDUSTRI (JKPI)
Email
Designation DS51 - PENSYARAH

Field of Expertise

Field Category (KPT) ENGINEERING AND TECHNOLOGY
Field (KPT) Mechanical Engineering
Field of Specialization (KPT) Other Mechanical Engineering n.e.c.

Areas of Research Interest

1. Additive Manufacturing
2. Machining
3. Manufacturing

Academic Qualification

YearQualificationInstitution
2015 DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL UNIVERSITI TUN HUSSEIN ONN MALAYSIA
2009 SARJANA KEJURUTERAAN MEKANIKAL (PEMBUATAN) UNIVERSITI TEKNOLOGI MALAYSIA
2006 SARJANA MUDA KEJURUTERAAN PEMBUATAN LEEDS METROPOLITAN UNIVERSITY

Professional Appointments

DS51 - Pensyarah

Management Experience

DateDescription
01/01/2017 - 31/12/2018 Ketua Kumpulan Fokus (FG)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Additive Manufacturing Research Group

Professional Societies

YearDescriptionRoleLevel
09/03/2012 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan
25/04/2019 - 24/04/2020 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
09/06/2016 - 08/06/2017 The Institution of Engineers, Malaysia (IEM)
Ahli Kebangsaan

Research Grants And Contracts

CodeTitleDesignationEnd Date
1631 Elucidating rheological and phase inversion mechanism of in-situ synthesis zinc oxide/polysulfone membrane Ahli 14/08/2020
H211 COLLAPSIBILITY BEHAVIOUR OF RAPD PROTOTYPING POLYLACTIC (PLA) USED AS DIRECT SACRIFICIAL PATTERN FOR MEDICAL PART IN INVESTMENT CASTING PROCESS Ahli 30/06/2020
H318 Evaluation of 3D Printing of Admixture Concrete Material for Concrete Structure Ahli 30/06/2020
U978 Development and Evaluation on In Vitro Bioactivity of 3D Printed Biomedical Scaffold from Natural Hydroxyapatite (HAp), Polycaprolactone (PCL), and Montmorillonite (MMT). Ahli 30/04/2020
K131 MPC - Productivity Improvement for Fabrication of Bioactive 3D Printing Filament Produced from Nano-sized Natural Hydroxyapatite, Polylactic Acid, and Montmorillonite. Ahli 31/10/2019
U874 Designing the Alkali Treatment Conditions Optimization for Properties Enhancement of Natural Fiber Reinforced Polymer Composite Ahli 31/08/2019
U880 An Explorations Study of The Current Practices, Adoption, And Barriers of 3D Printing Technology For Biomedical Products in Malaysia Ahli 31/08/2019
U427 Investigation of fuel-air mixing influencing parameters on cycle-to-cycle variation, combustion pressure and temperature, and heat release rate of a Liquid Sequential Injection LPG retrofitted engine Ahli 31/12/2018
U642 Development of Polycaprolactone (PCL) / Polylactic Acid (PLA) Composites for Fused Deposition Modelling (FDM) Ketua 31/12/2018
U805 Investigation on removal mechanism in catalytic aided electrical discharge machining of polycrystalline diamond Ahli 31/08/2018

Publications

Journal
S Hassan, M S Yusof, Z Embong, Q E Kamarudin, R H A Haq, M Ibrahim, K R Khairilhijra, O M F Marwah, N Sa'ude, M Ismon and M A Madlan
(2019) A Study Of Frequency And Pulses For Stepper Motor Controller System By Using Programmable Logic Controller, JOURNAL OF PHYSICS, Institute of Physics Publishing , 3, 1, ISSN:17426588
Mohd Nasrull Abdol Rahman, S S Mohamad , O M F Marwah , I Masood , M F Hassan , A M T Arifin , R H A Haq , S Ahmad , H F Haw and H Abdullah
(2019) Inter- And Intra- Observer Reliability Of The Offera Method For Assessing Exposure Risk Of Computer Work-Related To Wmsds, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing Ltd , 3, 1, ISSN:17426588
Asrizan Kaha, ishkrizat Taib, Muhammad Sufyan Amir Paisal, Ahmad Mubarak Tajul Arifin, Al Emran Ismail, Norzelawati Asmuin, Reazul Haq Abdul Haq, Surapong Chatpun, Takahisa Yamamoto, Kahar Osman
(2018) Lumped Parameter Modelling In Femoral Popliteal Artery For Normal And Severe Conditions, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE) , UTHM , 12, 193, ISSN:2229-838
Reazul Haq Abdul Haq, Omar Mohd Faizan Bin Marwah, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Said Ahmad, Ahmad Mubarak Tajul Arifin, Mohd Fahrul Hassan, Muhammad Zaini Yunos
(2018) Mechanical Properties Of Pcl/Pla/Peg Composite Blended With Different Molecular Weight (Mw) Of Peg For Fused Deposition Modelling (Fdm) Filament Wire, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING (IJIE), UTHM , 11, 187, ISSN:2229838
Said Ahmad, Mohd Amri Lajis, Reazul Haq Abdul Haq, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Ho Fu Haw, Haslina Abdullah, Mohd Fahrul Hassan
(2018) Surface Roughness And Surface Topography Of Inconel 718 In Powder Mixed Dielectric Electrical Discharge Machining (Pmedm) , INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 11, 181, ISSN:2229838X
Rahman, M.N.A., Hui, U.J., Haq, R.H.A., Hassan, M.F., Arifin, A.M.T., Yunos, M.Z., Adzila, S.
(2017) Assessment Of Repetitive Tasks Among Workers In Mould Making Manufacturing Industry, ADVANCED SCIENCE LETTERS, American Scientific Publishers , 5, 4405, ISSN:19366612
Haq, R. H. A., Rd. Khairilhijra, K., Wahab, M.S., Sa?ude, N., Ibrahim, M., Marwah, O.M.F., Yusof, M. S., Rahman, M. N. A., Ariffin, A. M. T., Hassan, M. F., Yunos, M. Z., Adzila, S.
(2017) Pcl/Pla Polymer Composite Filament Fabrication Using Full Factorial Design (Doe) For Fused Deposition Modelling, JOURNAL OF PHYSICS, IOP Publishing , 10, 1, ISSN:17426588
Abdul Haq R.H., Wahab M.S., Wahid M.U.
(2016) Fused Deposition Modeling Of Pcl/Ha/Mmt Biocompatible Polymer Nano-Composites, ADVANCED STRUCTURED MATERIALS, Springer, Singapore , 6, 23, ISSN:18698433
Mohd Fahrul Hassan, Mohamad Hafiz Mat Shah, Muhamad Zaini Yunos , Sharifah Adzila, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Reazul Haq Abdul Haq
(2016) Integration Of Ecqfd In Conceptual Design Activities For Enabling Environmentally Conscious Design, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, ARPN , 2489, ISSN:1819-6608
Mohd Fahrul Hassan, Mok Khiaw Keat, Muhamad Zaini Yunos, Sharifah Adzila, Ahmad Mubarak Tajul Arifin, Mohd Nasrull Abdol Rahman, Reazul Haq Abdul Haq
(2016) Investigation Of Existing Laptop Computer Towards Sustainable Development Using Design For Six Sigma And Design For Disassembly, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7683, ISSN:1819-6608
Adzila S., Kanasan N., Hassan M.F., Arifin A.M.T., Yunos M.Z., Rahman M.N.A., Haq R.H.A.
(2016) Synthesis And Characterization Of Magnesium Doped Calcium Phosphatefor Bone Implant Application, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 7, 8694, ISSN:18196608
Prosiding / Seminar
Amin, M. H. M., Arifin, A. M. T., Hassan, M. F., Haq, R. H. A., Rahman, M. N. A., Ismail, A. E., Rahim, M. Z., Ibrahim, M. R., Yunos, M. Z., Ismail, R.
(2017) An Evaluation Of Mechanical Properties On Kenaf Natural Fiber/Polyester Composite Structures As Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426596
Reazul Haq Abdul Haq, Mohd Nasrull Abdol Rahman, Ahmad Mubarak Tajul Ariffin, Mohd Fahrul Hassan, Muhamad Zaini Yunos, Sharifah Adzila
(2017) Characterization And Mechanical Analysis Of Pcl/Pla Composites For Fdm Feedstock Filament, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
O.M.F. MARWAH, A. DARSANI, M.A. JOHAR, A.A. ROSDEN, E.J. MOHAMAD, M.F. SHAARI, R.H.A. HAQ, A.M. AMIN
(2017) Evaluation Of Injection Molding Process Parameters For Manufacturing Polyethylene Terephthalate, EDP SCIENCES , 1, ISBN:2261236X
A.M.T. Arifin, M. Fahrul Hassan, A.E. Ismail, M. Zulafif Rahim, M. Rasidi Ibrahim, R.H. Abdul Haq, M.N.A. Rahman, M.Z. Yunos, M.H.M. Amin
(2017) Investigation On Suitability Of Natural Fibre As Replacement Material For Table Tennis Blade, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:1757899X
HAQ R.H.A., KHAIRILHIJRA K.R., WAHAB M.S., SA'UDE N., IBRAHIM M., MARWAH O.M.F., YUSOF M.S., RAHMAN M.N.A., ARIFFIN A.M.T., HASSAN M.F., YUNOS M.Z., ADZILA S.
(2017) Pcl/Pla Polymer Composite Filament Fabrication Using Full Factorial Design (Doe) For Fused Deposition Modelling, INSTITUTE OF PHYSICS PUBLISHING , -, ISBN:17426596
Reazul Haq Abdul Haq
(2013) Fabrication Process Of Polymer Nano-Composite Filament For Fused Deposition Modeling, TRANS TECH PUBLICATIONS , 8
Reazul Haq Abdul Haq
(2013) Impact Test And Bioactivity Properties Of Polycaprolactone (Pcl) By Addition Of Nano-Montmorillonite (Mmt) And Hydroxyapatite (Ha), TRANS TECH PUBLICATIONS , 1129
Reazul Haq Abdul Haq, Md Saidin Wahab, Mat Uzir Wahit
(2013) Improvement Of Mechanical Properties Of Polycaprolactone (Pcl) By Addition Of Nano-Montmorillonite (Mmt) And Hydroxyapatite (Ha), TRANS TECH PUBLICATION , 815, ISBN:9783037856352

« Back