Staff Profile
| Full Name | PROF. MADYA Dr. SHAHRUDDIN BIN MAHZAN @ MOHD ZIN |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN MEKANIK (JKM) |
| Designation | DS54 - PROFESOR MADYA |
|
DEKAN PEJABAT AM FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Field of Expertise
| Field Category (KPT) | ENGINEERING AND TECHNOLOGY |
|---|---|
| Field (KPT) | Mechanical Engineering |
| Field of Specialization (KPT) | Other Mechanical Engineering n.e.c. |
Areas of Research Interest
| 1. | Composites |
| 2. | Smart Materials and Structures |
| 3. | Acoustics |
| 4. | Vibration and Condition Monitoring |
Innovation Field of Interest
| 1. | BioComposites |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2007 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | THE UNIVERSITY OF SHEFFIELD |
| 2007 | The University Of Sheffield | |
| 1999 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITI KEBANGSAAN MALAYSIA |
Professional Appointments
| DS54 - Profesor Madya |
Management Experience
| Date | Description |
|---|---|
| 01/07/2017 - 30/06/2019 | Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
| 01/07/2015 - 30/06/2017 | Dekan
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
| 01/01/2014 - 30/06/2015 | Timbalan Dekan (Akademik & Antarabangsa)
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
| 01/01/2012 - 31/12/2013 | Timbalan Dekan (Akademik & Antarabangsa)
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan |
| 01/07/2011 - 31/12/2011 | Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Mekanik (JKM) |
| 01/08/2009 - 30/06/2011 | Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Mekanik (JKM) |
| 01/11/2007 - 31/10/2009 | Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 18/11/2011 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2012 | Statik (BDA10203), Sesi 20122013 Semester 1, UTHM, 2012 | University |
| 2012 | Signal Processing and Measurement (MDM10604), Sesi 20122013 Semester 1, UTHM, 2012 | University |
| 2011 | Fracture and Failure Mechanism (MDP10203), Sesi 20102011 Semester 3, UTHM, 2011 | University |
| 2011 | FailureAnalysis and Defect (MMV 10003), Sesi 20102011 Semester 3, UTHM, 2011 | University |
| 2011 | Research Methodology (MDU10100), Sesi 20102011 Semester 1, UTHM, 2011 | University |
| 2011 | Fracture and Failure Mechanism (MDM 10503), Sesi 20112012 Semester 1, UTHM, 2011 | University |
| 2011 | Noise and Vibration (BDC4013), Sesi 20102011 Semester 3, UTHM, 2011 | University |
| 2010 | Control Engineering (BDA3073), Sesi 20092010 Semester 2, UTHM, 2010 | University |
| 2009 | Dynamics (BDA2013), Sesi 20092010 Semester 1, UTHM, 2009 | University |
| 2009 | Pemantauan Keadaan dan Kebisingan (BKM4283), Sesi 20082009 Semester 2, UTHM, 2009 | University |
| 2009 | Strength of Materials (BDA1042), Sesi 20082009 Semester 2, UTHM, 2009 | University |
| 2008 | Strength of Material (DDA2073), Sesi 20072008 Semester 3, UTHM, 2008 | University |
| 2003 | Engineering Materials (DKM3023), Sesi 20022003 Semester 2, Kuittho, 2003 | University |
| 2002 | Engineering Thermodynamics (DKM2053), Sesi 20022003 Semester 1, Kuittho, 2002 | University |
Research Grants And Contracts
Publications
| Book |
|---|
| S.Mahzan (2012) Informatics In Control, Automation And Robotics, Springer Berlin Heidelberg , 679 , ISBN:9783642259913 |
| Book Chapters |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Impact Damage Detection In A Composite Structure Using Artificial Neural Network, Composite Materials Technology: Neural Network Applications, CRC Press: Taylor and Francis Group , 112, ISBN:9781420093322 |
| Journal |
| Azmahani Sadikin, Nurul Akma Mohd Yunus, Saiful Anuar Abd Hamid, Al Emran Ismail, Salihatun Salleh, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Sallehuddin Shah Ayop (2018) A Comparative Study Of Turbulence Models On Aerodynamics Characteristics Of A Naca0012 Airfoil, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 134, ISSN:2229838X |
| Zaleha Mohamad, Al Emran Ismail, S. Mahzan, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Maznan Ismon, Mohd Amran Madlan (2018) Classification For Damage Severity In Natural Fibre Composites Using Principal Component Analysis, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 12, 147, ISSN:2229838X |
| Al Emran Ismail, Azmahani Sadikin, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Salihatun Md. Salleh , Sufizar Ahmad , Mohd Baharudin Ridzuan (2018) Crushing Performances Of Axially Compressed Woven Kenaf Fiber Reinforced Cylindrical Composites, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 189, ISSN:2229838X |
| M. Azham Azmi, S. M. Yahya, S. Ahmad, S. Mahzan, M. Taib, H. A. Rahman, H. Taib (2018) Effect Of Silica (Sio2) Filler On Thermal Stability Of Polysiloxane Composites, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit akademia baru , 8, 117, ISSN:22897879 |
| R. Muda, M. Azham Azmi, Shahruddin Mahzan, Hatem Mostafa Elwalwal, S. Ahmad, H. Taib (2018) Effect Of Sio2 Solid Loading And Sintering Temperatures On The Physical Properties Of Sio2-Nio Foam, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 11, 37, ISSN:10139826 |
| N.A. Nazaruddin, S. Ahmad, H. Taib, S. Mahzan, S. Adzila and HATEM Mostafa Elwalwal (2018) Effect Of Various Solid Loadings In Producing Silica-Nickel Oxide (Sio2-Nio) Foams, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 9, 50, ISSN:16629795 |
| Azlan. W. M, Salleh. S. M, Mahzan S, Sadikin A, Ahmad S (2018) Experimental Dataset To Develop A Parametric Model Based Of Dc Geared Motor In Feeder Machine , INTERNATIONAL JOURNAL OF ELECTRICAL AND COMPUTER ENGINEERING (IJECE), Institute of Advanced Engineering and Science (IAES) , 6, 111, ISSN:20888708 |
| Muhamad Fitri, Shahruddin Mahzan (2018) Influence Of Coupling Agent And Fibre Treatment To Mechanical Properties Of Oil Palm Fibre Reinforced Polymer Matrix Composite, JOURNAL OF MECHANICAL ENGINEERING, Universiti Teknologi MARA Malaysia , 3, 223, ISSN:18235514 |
| Mohammad Sukri Mustapa, Noradila Abdul Latif, Nurul Farahin Mohd Joharudin, Shahruddin Mahzan, Mohd Idrus Masirin and Norashikin Abdul Hamid (2018) The Effect Of Heat Treatment On Compression Strength Of Recycled Aa6061 Aluminium Chips, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 10, 124, ISSN:16629752 |
| Eliza M. Yusup and Shahruddin B. Mahzan (2018) The Physical Characteristics Of Composite Bone Scaffold Fabricated From Opefb-Cmc, Chitosan And Ha, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, Engineering Technology Publishing , 9, 466, ISSN:22780149 |
| Al Emran Ismail, Fazimah Mat Noor, Zaleha Mohamad, Mohd Amran Madlan, M. Zulafif Rahim, M. Rasidi Ibrahim, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan, Nik Hisyamudin Muhd Nor (2017) Effect Of Triggering Angles On The Crushing Mechanisms Of Hybrid Woven Kenaf/Aluminum Hollow Cylinders, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 12, 012034, ISSN:17426588 |
| How Chui Wei, S.M Salleh, Abdullah Mohd Ezree, I. Zaman, M.H Hatta, B.A. Md Zain, S. Mahzan, M.N.A. Rahman and W.A.W Mahmud (2017) Improvement Of Automatic Fish Feeder Machine Design , JOURNAL OF PHYSICS: CONFERENCE SERIES , UTHM , 10, 1, ISSN:17426588 |
| H.Taib, P.S. Abdul Rahim, M. S .Shamsudin, Rizamarhaiza M., N. A. Nazaruddin, M. Azham Azmi, S. Mahzan, S. Ahmad (2017) The Effect Of Nickel Oxide (Nio) Compositions In Consolidation Of Silica-Nickel Oxide (Sio2-Nio) Foams Using Replication Method, JOURNAL OF MECHANICAL ENGINEERING, Institut Pengurusan Penyelidikan (RMI), Universiti Teknologi MARA , 12, 63, ISSN:18235514 |
| Shahruddin Mahzan, Muhamad Fitri and M. Zaleha (2017) Uv Radiation Effect Towards Mechanical Properties Of Natural Fibre Reinforced Composite Material: A Review , IOP: MATERIALS SCIENCE AND ENGINEERING, IOP SCIENCE , 1, 10, ISSN:1757899X |
| M Zaleha, S Mahzan , Muhamad Fitri, K A Kamarudin, Eliza Y, A L Mohd Tobi (2017) Wave Velocity Characteristic For Kenaf Natural Fibre Under Impact Damage, IOP SCIENCE: MATERIAL SCIENCE AND ENGINEERING, IOP SCIENCE , 1, 1, ISSN:1757899X |
| Mohd Tobi A.L., Zaman I., Mustapa M.S., Siswanto W.A., Mahzan S. (2016) Case Study: Techniques For Material Characterization Of Brass Tensile Testing Fracture Sample, ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network , 8, 10128, ISSN:18196608 |
| Shahruddin Mahzan and Muheieddin Meftah Farag Elghanudi (2016) Feasibility Study Of Structural Health Monitoring Towards Pipeline Corrosion Monitoring: A Review, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 8673, ISSN:18196608 |
| Mohd Yussni Hashim, Mohd Nazrul Roslan, Omar Mohd Faizan Marwah, Shahruddin Mahzan@Mohd Zin and Saparudin Ariffin (2016) The Effect Of Alkali Treatment Conditions On Tensile Strength Of Kenaf Fiber, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 8658, ISSN:18196608 |
| Hashim M.Y., Roslan M.N., Marwah O.M.F., Mahzan S., Zin M., Ariffin S. (2016) The Effect Of Alkali Treatment Conditions On Tensile Strength Of Kenaf Fiber, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 8662, ISSN:18196608 |
| Shahruddin Mahzan, Hatem Mostafa Elwalwal and Muheieddin Meftah Farag Elghanudi (2016) Viability Of Applying Mechanical Impedance Based Structural Health Monitoring For Pipeline : A Review , ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 8679, ISSN:18196608 |
| Shahruddin Mahzan, Hatem Mostafa Elwalwal and Muheieddin Meftah Farag Elghanudi (2016) Viability Of Applying Mechanical Impedance Based Structural Health Monitoring For Pipeline: A Review, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 1, 8679, ISSN:18196608 |
| Mohd Azham Azmi, Mohd Syahmi Muin @ Marsayid, Shahruddin Mahzan, Sufizar Ahmad, Hariati Taib (2016) Vibration Exposure Analysis Of Polydimethylsiloxane Reinforced Silica Derived Rice Husk Ash, MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, Faculty of Science and Technology, Universiti Kebangsaan Malaysia , 7, 1138, ISSN:13942506 |
| Mohd Azham Azmi, Mohd Syahmi Muin @ Marsayid, Shahruddin Mahzan, Sufizar Ahmad, Hariati Taib (2016) Vibration Exposure Analysis Of Polydimethylsiloxane Reinforced Silica Derived Rice Husk Ash [Kajian Pendedahan Getaran Terhadap Polidimetilsiloksana Yang Diperkuat Silika Dari Abu Sekam Padi], MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, The Malaysian Analytical Sciences Society , 1144, ISSN:1394-2506 |
| M Y Eliza, M Shahruddin, J Noormaziah and W D Wan Rosli (2015) Carboxymethyl Cellulose (Cmc) From Oil Palm Empty Fruit Bunch (Opefb) In The New Solvent Dimethyl Sulfoxide Dmso)/ Tetrabutylammonium Fluoride (Tbaf), JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing , 6, 1, ISSN:17426596 |
| Eliza M. Yusup, Shahruddin Mahzan, Noormaziah Jafferi, and Chung Wee Been (2015) The Effectiveness Of Tbaf/Dmso In Dissolving Oil Palm Empty Fruit Bunch-Cellulose Phosphate, JOURNAL OF MEDICAL AND BIOENGINEERING, Engineering and Technology Publishing , 4, 165, ISSN:23013796 |
| D. Sebayang, Deni S. Khaerudini, M.A. Othman, S. Hasan, S. Mahzan, D. Fredrick, T. Sujitno and P. Untoro (2014) Comparison Of High Temperature Oxidation Of Nanocrystalline Fecr Alloy Consolidated By Spark Plasma Sintering And Hot Pressing, WORLD JOURNAL OF ENGINEERING, MULTI-SCIENCE PUBLISHING COMPANY LTD , 1, 123, ISSN:17085284 |
| S.K. Subramaniyan, A.K. Kananasan, M.R.M. Yunus, S. Mahzan and M.I. Ghazali (2014) Crush Characteristics And Energy Absorption Of Thin-Walled Tubes With Through-Hole Crush Initiators, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 9, 181, ISSN:16627482 |
| M. Zaleha, S. Mahzan and I.Maizlinda Izwana (2014) Damage Size Classification Of Natural Fibre Reinforced Composites Using Neural Network, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 4, 60, ISSN:16628985 |
| Mohd Yussni Hashim, Mohd Nazrul Roslan, Shahruddin Mahzan @ Mohd Zin and Saparudin Ariffin (2014) Impact Of Alkali Treatment Conditions On Kenaf Fiber Polyester Composite Tensile Strength, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 11, 285, ISSN:16627482 |
| M. Zaleha, S. Mahzan and I. Maizlinda Izwana (2014) Implementing Neural Network For Damage Severity Identification Of Natural Kenaf Fibre Composites, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 6, 189, ISSN:16627482 |
| Shahruddin Mahzan, Wahieda M. Bahtiar and Zaleha Mohamad (2014) Investigation On The Tensile Strength Of Treated And Untreated Woven Sugar Palm Fibre Reinforced Composites, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 11, 588, ISSN:16627482 |
| M. Zaleha, S. Mahzan and M.I. Idris (2014) Passive Damage Detection Of Natural Fibre Reinforced Composites Using Sensor Response Data, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 3, 17, ISSN:16627482 |
| S. M. Yahya, A. Azmi, M. I. Idris, M. Z. Yunos, S. Mahzan, S. Ahmad, H. Taib (2014) Short Review: Role Of Metal Oxides As Filler In Polysiloxane Sheet Composite, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 27, ISSN:16627482 |
| Shahruddin Mahzan, Mohd Azham Azmi, Hariati Taib and Nurul Emi Nur Ain Mohammad (2014) Vibration Exposure Analysis Of The Polysiloxane Reinforced With Rice Husk Silica, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 11, 531, ISSN:16627482 |
| M. A. Madlan, S. R. Masrol, M. Ismon, M. N. Roslan, M. N. Yahya, M. I. Ghazali, S. Mahzan (2013) Evaluation Of Sound Comfort In Examination Hall Using Acoustical Environmental Analyses , APPLIED MECHANICS AND MATERIALS, 2013 Trans Tech Publications, Switzerland , 4, 825, ISSN:1662-7482 |
| Muhammad F.S., Samad Z., Husaini A.B., Arshad M.R., Mahzan S. (2013) Preliminary Analysis On Generated Jet Pressure From Ionic Polymer Composite Actuated Radial Contraction Using Balloon Manometry Technique, INDIAN JOURNAL OF MARINE SCIENCES, National Institute of Science Communication And Information Resources , 12, 1023, ISSN:03795136 |
| Prosiding / Seminar |
| M. Azham Azmi, S. Mahzan, S. Ahmad, S.M. Salleh, H.A. Rahman, M.A.Choiron, A. Ismail, H.Taib (2019) Vibration Exposure Of Polydimethylsiloxane (Pdms) Reinforced Silica (Sio2): Comparison Of Different Source Of Silica (Sio2) As Filler, IOP PUBLISHING LTD. , 1, ISBN:17578981 |
| Mohammad Sukri Mustapa, Noradila Abdul Latif, Nurul Farahin Mohd Joharudin, Shahruddin Mahzan, Mohd Idrus Mohd Masirin, Norashikin Abdul Hamid (2018) The Effect Of Heat Treatment On Compression Strength Of Recycled Aa6061 Aluminium Chips, SCIENTIFIC.NET , 124, ISBN:9783035713367 |
| Ong Pauline, Hariati Taib, Mohd AzwirAzlan, Nurul Fitriah Nasir, Mohd Azham Azmi, Saliha Md Salleh, Badrul Aisham Md Zain, Shahruddin Mahzan, Muhd Hafeez Zainulabidin, Sufizar Ahmad, Nasrull Abd Rahman, Zamani Ngali, Hamimah Abd Rahman (2017) Assessment And Evaluation For Programme Learning Outcomes In Faculty Of Mechanical And Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, IOP Science , 1, ISBN:1757-899X |
| MOHD NASRULL ABDOL RAHMAN, SITI SHAFIKA MOHAMAD, SALIHATUN MD SALLEH, SHAHRUDDIN MAHZAN & SUFIZAR AHMAD (2017) Feedback Survey On The Usability Of The Offera Method For Assessing An Exposure Risks Of Computer Work Related To Wmsds, MATEC WEB OF CONFERENCES , 1, ISBN:2261236X |
| H. Taib, S M Salleh, B A Md Zain, M.A. Azlan, S. Mahzan, Hafeez Z A, Ong, P., S. Ahmad, M. N.A Rahman, N.F. Nasir, M. Azham Azmi, H.A Rahman, Z.Ngali (2017) Programme Learning Outcomes Assessment And Continuous Quality Improvement In Faculty Of Mechanical And Manufacturing, Uthm, Institute of Physics Publishing , 1, ISBN:17578981 |
| Muhamad Fitri and Shahruddin Mahzan (2016) The Effect Of Fibre Content, Fibre Size And Alkali Treatment To Charpy Impact Resistance Of Oil Palm Fibre Reinforced Composite Material, IOP Publishing , 012030 , ISBN:1757-899X |
| S.Mahzan (2012) A Review On Materials And Processing For Producing Scaffold For Adult Proximal Tibia Bone Fracture, Malaysian Orthopaedics |
| Shahruddin Bin Mahzan @ Mohd Zin (2012) Implementation Of Rural Development Programme: How Could Ihl Student Works Effectively With The Public Community And Governmental Bodies?, Asia Engage |
| Shahruddin Bin Mahzan @ Mohd Zin (2012) Structuring And Managing An Engineering Design Education Towards The Effectiveness Of Outcome Based Education System, International Association of Computer Science and Information Technology Press (IACSIT Press) |
| S.Mahzan (2011) A Review On The Characteristics Of Neck And Spine Under Collision Using Simulated Model, UTHM |
| S.Mahzan (2011) Investigation Into Piston-Slap Force Under Friction Effect Of Diesel Engine |
| Shahruddin Bin Mahzan @ Mohd Zin (2011) Structural Energy Absorption Characteristics: A Review, UTHM |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) A Study On The Growth Of Grain Boundary In Aluminium With A Percentage Variation Of Sic By Using Cold Compaction In Powder Metallurgy Technique |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) Evaluation Process Of Interlayer Clay And Alumina As Pre Manufacturing Process Of Solid Oxide Fuel Cell Membrane |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) Manufacturing Of Thin Disk Ni-O /Ysz Using Compaction Method As Anode Solid Oxide Fuel Cell |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) Mathematical Model For In-Cylinder Pressure Of Combustion Process In The Diesel Engine As A Correlation To The External Load |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) Preliminary Study On Condition Monitoring Of Automotive Gearbox Using Wear Debris Analysis |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) Sound Absorption Coefficient Of Acoustics Panel Made Of Bagasse Fibre |
| Shahruddin Bin Mahzan @ Mohd Zin (2010) Sound Absorption Of Arenga Pinnata Natural Fibre |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Development Of Clay Thin Plate As First Preparation For Solid Oxide Fuel Cell Manufacture Preliminary Study |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Effect Of Body Tilt Angle To The Shaking Forces On The Diesel Engine'S Crankshaft |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Fatigue Vibration Monitoring Using Laser Doppler For Dissimilar Joint Of Cracked Materials |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Ijuk Medium Density Fibreboard: Potential Application As An Acoustical Panel |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Investigation Of Physical Properties Of Arenga Pinnata Fibre Reinforced Composite |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Investigation On Sound Absorption Of Rice Husk Reinforced Composite |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Mechanical Properties Of Clay Thin Plate As Pre-Evaluation For Solid Oxide Fuel Cell Manufacture |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Study On Mechanical And Sound Properties Of Kenaf Foam Composite |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) Study On Sound Properties Of Composite Material Using Recycled Rubber And Coconut Coir |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) The Characteristics Of Porosity In Al-Sic Metal Matrix Composite Under Different Milling Time |
| Shahruddin Bin Mahzan @ Mohd Zin (2009) The Influence Of Variation Milling Time Into Mechanical Properties For 5% Sic Reinforced Aluminium 5082 Developed By Using Powder Metallurgy Technique |
| Shahruddin Bin Mahzan @ Mohd Zin (2008) Impact Localisation Of A Smart Composite Panel Using Wave Velocity Propagation |
| Shahruddin Bin Mahzan @ Mohd Zin (2008) Penetration Prediction In A Mesh-Less Structure By A Hard Projectile |
| Shahruddin Bin Mahzan @ Mohd Zin (2007) Comparative Study Of Impact Damage Detecion In Aerospace Structures |
| Shahruddin Bin Mahzan @ Mohd Zin (2005) A Mesh-Less Treatment Of Target Structures During Penetration Process |
| Shahruddin Bin Mahzan @ Mohd Zin (2005) Signal Feature Extraction For Impact Damage Detection In Composite Materials |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2012 | Consultative Panel for Kolej Kemahiran Tinggi Mara Kemaman (TOT), 2012 | University |
| 2011 | Auditor for IKBN Temerloh Academic Evaluation, 2011 | University |
| 2010 | Consultative Panel for Technology Park Malaysia under project of Jentera Bajak 5 Fungsi, 2010 | Private |
Supervision
| Year | Description | Role |
|---|---|---|
| 2012 | Assessor for Malaysian International Scholarship, Kementerian Pengajian Tinggi, 2012 | Assessor |
| 2012 | Supervisor for Zaleha binti Mohamad, PhD, UTHM, 2012 | Supervisor |
| 2012 | Supervisor for Eliza binti Md Yusop, PhD, UTHM, 2012 | Supervisor |
| 2012 | Supervisor for Faiz bin Mokhtar, MEng, UTHM, 2012 | Supervisor |
| 2012 | Reviewer for 3rd International Conference on Mechanical and Manufacturing Engineering, 2012 | Assessor |
| 2012 | Reviewer for ASM Science Journal, 2012 | Assessor |
| 2012 | Assessor for Student Assessment (SAC), Kementerian Pengajian Tinggi Malaysia, 2012 | Assessor |
| 2012 | Supervisor for Wahieda bte Mohamad bahtiar, MEng, UTHM, 2012 | Supervisor |
| 2011 | Reviewer for International Journal of Physical Science, 2011 | Assessor |
| 2011 | Reviewer for International Conference on Advanced Manufacturing, 2011 | Assessor |
| 2011 | Reviewer for International Conference on Chemical Innovation, 2011 | Assessor |
| 2011 | Reviewer for International Conference on Composite Science and Technology, 2011 | Assessor |
| 2011 | Reviewer for 2nd International Conference on Mechanical and Manufacturing Engineering, 2011 | Assessor |
| 2011 | Reviewer for Scientific Research Essays, 2011 | Assessor |
| 2011 | Reviewer for Regional Symposium on Engineering and Technology, 2011 | Assessor |
| 2010 | Co-Supervisor for Norashida binti Arsat, MSc, UTHM, 2010 | Supervisor |
| 2010 | Co-Supervisor for Deni Shidqi Khaerudini, MSc, UTHM, 2010 | Supervisor |
| 2010 | Examiner for Masters Thesis: Nur Hidayah bt Mohd Zain (2010): Rapid Prototyping | Examiner |
| 2010 | Reviewer for National Conference on Advanced Manufacturing and Materials Engineering, 2010 | Assessor |
| 2009 | Assessor for Ministry of Education, Matriculation Dept, Engineering Drawing Final Examination Questions | Assessor |
| 2009 | Assessor for Basic Engineering Examination Questions for Matriculation Programme, Ministry of Education Malaysia, 2009 | Assessor |
| 2009 | Supervisor for Nurul Azna Idayu bt. Abd Aziz, MSc, UTHM, 2009 | Supervisor |
| 2009 | Co-Supervisor for Nik Fazli Sapian, UTHM, 2009 | Supervisor |
| 2009 | Co-Supervisor for Fuadi Noor Balia, PhD, UTHM, 2009 | Supervisor |
| 2009 | Co-Supervisor for Ade Firdianto, MSc, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for S.Kanna A/L Subramaniyan, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Hisham bin Bahraldin, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Ahmad Azri bin Ismail, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Md Nu'man bin Bashir, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Nurul Azna Idayu binti Ab Aziz, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Syed Ramzi bin Wan Madehi, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Norshasheera binti Ezani, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Nor Hafizah binti Othman, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Fairus binti Nasri, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Siti Zulaikha binti Abdul, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Siti Mariam binti Mahazan, BEng, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Rosmawani binti Ghazali, BEng, UTHM, 2009 | Supervisor |
| 2009 | Co-supervisor for Lindawati, MSc, UTHM, 2009 | Supervisor |
| 2009 | Supervisor for Mohd Azwan bin Baharin, BEng, UTHM, 2009 | Supervisor |
| 2008 | Reviewer for International Conference on Mechanical and Manufacturing Engineering, 2008 | Assessor |
| 2008 | Supervisor for Mohd Hijaz bin Mohd Karim, BEng, UTHM, 2008 | Supervisor |
| 2008 | Supervisor for Nozie binti Abdullah, BEng, UTHM, 2008 | Supervisor |
| 2008 | Supervisor for Mawarnie binti Ismail, BEng, UTHM, 2008 | Supervisor |
| 2008 | Co-Supervisor for Sulistyo, PhD, UTHM, 2008 | Supervisor |
| 2007 | Reviewer for Jurnal Sains dan Teknologi, UTHM, 2007 | Assessor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2011 | Technical Advisory Committee for ADTEC Batu Pahat, Malaysia, 2011-2012 | National |
| 2010 | Water Rocket Competition: Collaboration with Pejabat Pendidikan Daerah Batu Pahat, 2010 | University |
| 2004 | Committee Member of Association of Malaysian Graduates Sheffield, United Kingdom | Government |