Staff Profile

Full NamePROF. MADYA Dr. SUFIZAR BINTI AHMAD
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR)
Email
Designation DS54 - PROFESOR MADYA
  KETUA JABATAN
JABATAN SISWAZAH
FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

Field of Expertise

Field Category (KPT) MATERIAL SCIENCES
Field (KPT) Advanced Materials
Field of Specialization (KPT) Metals and Metal Alloy Materials

Academic Qualification

YearQualificationInstitution
2010 DOKTOR FALSAFAH KEJURUTERAAN MEKANIK DAN BAHAN UNIVERSITI KEBANGSAAN MALAYSIA
2003 SARJANA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA
2002 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA

Professional Appointments

DS54 - Profesor Madya

Management Experience

DateDescription
16/04/2019 - 31/12/2019 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Siswazah
01/01/2018 - 15/04/2019 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)
01/01/2016 - 31/12/2017 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)

Professional Societies

YearDescriptionRoleLevel
12/07/2005 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2011 Bahan Teknologi Kejuruteraan [BDU 10603], sesi 20102011 semester 2, universiti tun hussein onn malaysia, 2011 University
2011 Sains bahan [BDA 10302], sesi 20102011 semester 2, universiti tun hussein onn malaysia, 2011 University
2010 Pemilihan bahan [DDA 2082], sesi 20102011 semester 1, universiti tun hussein onn malaysia, 2010 University
2010 Sains Bahan [BDA 1062], sesi 20102011 semester 1, universiti tun hussein onn malaysia, 2010 University
2010 Termodinamik Sains Bahan [BKM 3413], Sesi 2009//2010 semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Makmal kejuruteraan II [BDA 2701], sesi 20102011 semester 1, universiti tun hussein onn malaysia, 2010 University
2010 Makmal kejuruteraan I [DDA 2711], sesi 20102011 semester 1, universiti tun hussein onn malaysia, 2010 University
2005 Sains Bahan [BKF 1233 dan BKM 4013], Sesi 2005/2006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Pemilihan Bahan [BKM 3163 dan BKM 5023], Sesi 2005/2006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Pemilihan Bahan [BDA 2042], Sesi 2005/2006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Pemilihan Bahan [BKM 3163/ BKM 5023], Sesi 2004/2005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Sains Bahan [BKF 1233], Sesi 2004/2005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Sains Bahan [BKM 4013 dan BEE 2223], Sesi 2004/2005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Makmal Kejuruteraan 3 [BKM 3141], Sesi 2005/2006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Makmal Kejuruteraan 2 [BKM 2141], Sesi 2004/2005 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2005 Sains Bahan [BKM 4013], Sesi 2005/2006 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 University
2004 Makmal Kejuruteraan 3 [BKM 3141], Sesi 2004/2005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2004 University
2004 Pemilihan Bahan [BKM 3163 dan BMB 3013], Sesi 2004/2005 Semester 1, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2004 University
2003 Makmal Kejuruteraan 2 [BKM 2141], Sesi 2003/2004 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2003 University
2003 Sains Bahan [BKF 1233], sesi 2003/2004 Semester 2, Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2003 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
M001 Metal Supported Solid Oxide Fuel Cell (MS-SOFC) Ahli 31/07/2020
U875 Producing and Characterization 316L Stainless Steel (SS316L) Foams Using Palm Oil Shell As Space Holder via Powder Metallurgy Techniques Ahli 31/08/2019
1585 Interactions Between Electrophoretically Deposited BSCF-SDCC Cathode on Ferritic Stainless Steel SOFC Interconnect Ahli 31/07/2019
1593 Fundamental Study on Novel Silica-Nickel Oxide Foam Fabrication As Methane Reforming Catalyst Ahli 31/07/2019
U553 Mechanical Strength Augmentation With Glass Synthesis Of Volca Life Energy Comb Incorporate Far Infraded Technology And Negative Ion Data Analytic Ketua 31/05/2018
U747 Fabrication silica from green waste materials to produce silica foam via powder metallurgy technique Ketua 31/03/2018
U294 Fabrication of Naturally Derived Silica Foam via Powder Metallurgy Technique for Water Treatment Purposes Ahli 31/01/2018
1512 Properties enhancement of nickel oxide-samarium doped seria carbonate (NiO-SDC carbonate) composite anode for low temperature solid oxide fuel cells Ahli 26/01/2018
U468 Fabrication of Rice Husk Denred Silica Powder to Foam Via Powder Metallugy Technique Ahli 28/02/2017
1450 The Use Of Materials Science Knowledge To Sanitaryware And Tableware Manufacturing Process Ahli 31/12/2016
1460 New approach to improvement corrosion resistance on X65 pipeline steel and corrosion resistance alloys (CRAs) by using green inhibitor and coating. Ahli 31/12/2016
1220 Properties Modification of Lanthanum Strontium Cobalt Ferrite (LSCF)-SDC Carbonate Nanocomposite Cathodes for Durability Enhancement Ahli 30/09/2016
U285 Optimization of The Processing Parameters for Physical and Machanical Properties of Crystalline Silica Foams Using Compaction and Slurry Method Ketua 31/07/2016
X019 Technology and Feasibilty Study On Fabrication Of Micro-Solied Oxide Fuel Cell Using Development Materials Ahli 31/07/2016
A022 High Performance Polymeric Materials Ahli 29/02/2016
R022 Vibration Damping Properties by Utilisation of Quartz Filled Polysiloxane Ahli 15/09/2015
E028 An Investigation Of Stainless Steel (SS316L) And Cobalt Chromium (Cocr) Foam For Orthopaedics Application By Using Powder Metallurgy Routes Ketua 31/08/2015
1273 Vibration Damping Properties by Utilisation of Quartz Filled Polysiloxane Ahli 01/11/2014
1375 Polysiloxane Filled Silica Sheet Using Casting Technique Ahli 31/10/2014
1376 Exploratory Study Of Stainless Steel (SS316L) Ketua 31/10/2014
1377 Characterisation Of Cobalt Chromium (CoCr) Foams Using Compaction And Slurry Method For Orthopaedics Application Ketua 31/10/2014
1380 Durability Enhancement Of LSCF-SDC Carbonate Composite Cathode Ahli 31/10/2014
1103 Development Of Nano Composite LSCF Cathode Carbonate For Solid Oxide Fuel Cell (SOFC) Ketua 30/09/2014
1155 Development Of Nano Composite LSCF Cathode Carbonate For Solid Oxide Fuel Cell (SOFC) Ketua 31/03/2014
1153 Preparation And Characterisation Of Stainless Steel And Titanium Foams Via Slurry And Compaction Methods Ketua 28/02/2014
1154 Ceramic Foam Fabrication Techniques For Wastewater Treatment Application Ketua 31/08/2013
0746 Consolidation of Ceramic Porous Membrane Via Different Fabrication Methods Ahli 31/05/2013
0787 Influence of sintering parameters on mechanical & physical properties of titanum alloy foams using taguchi method Ketua 14/03/2012
X018 Development and processing of titanium foams for polymer electrolyte membrane (PEM) fuel cell bipolar plate Ahli 30/06/2009
0156 The Corrosion Behavior Of 6061 And 6063 Aluminum Alloy Using Hard Anodizing Ahli 31/12/2005

Publications

General Publications
Sufizar Binti Ahmad
(2007) Engineering Materials Selection (Bda 2042/Dda 2082), UTHM
Sufizar Binti Ahmad
(2007) Makmal Kejuruteraan Bahan, Pejabat penerbit UTHM
Journal
Mohd Nasrull Abdol Rahman, S S Mohamad , O M F Marwah , I Masood , M F Hassan , A M T Arifin , R H A Haq , S Ahmad , H F Haw and H Abdullah
(2019) Inter- And Intra- Observer Reliability Of The Offera Method For Assessing Exposure Risk Of Computer Work-Related To Wmsds, JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Publishing Ltd , 3, 1, ISSN:17426588
Azmahani Sadikin, Nurul Akma Mohd Yunus, Saiful Anuar Abd Hamid, Al Emran Ismail, Salihatun Salleh, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Sallehuddin Shah Ayop
(2018) A Comparative Study Of Turbulence Models On Aerodynamics Characteristics Of A Naca0012 Airfoil, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 134, ISSN:2229838X
Al Emran Ismail, Azmahani Sadikin, Mohd Nasrull Abdol Rahman, Shahruddin Mahzan, Salihatun Md. Salleh , Sufizar Ahmad , Mohd Baharudin Ridzuan
(2018) Crushing Performances Of Axially Compressed Woven Kenaf Fiber Reinforced Cylindrical Composites, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 189, ISSN:2229838X
M. Azham Azmi, S. M. Yahya, S. Ahmad, S. Mahzan, M. Taib, H. A. Rahman, H. Taib
(2018) Effect Of Silica (Sio2) Filler On Thermal Stability Of Polysiloxane Composites, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit akademia baru , 8, 117, ISSN:22897879
Muhammad Ikhmal Hanapi, Sufizar Ahmad, Hariati Taib and Tan Chee Chen
(2018) Effect Of Sintering Temperature And Ar Glass Addition Towards Physical Properties Of Porcelain Clay For Sewer Pipes Application, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 83, ISSN:2229838X
R. Muda, M. Azham Azmi, Shahruddin Mahzan, Hatem Mostafa Elwalwal, S. Ahmad, H. Taib
(2018) Effect Of Sio2 Solid Loading And Sintering Temperatures On The Physical Properties Of Sio2-Nio Foam, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 11, 37, ISSN:10139826
N.A. Nazaruddin, S. Ahmad, H. Taib, S. Mahzan, S. Adzila and HATEM Mostafa Elwalwal
(2018) Effect Of Various Solid Loadings In Producing Silica-Nickel Oxide (Sio2-Nio) Foams, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 9, 50, ISSN:16629795
Azlan. W. M, Salleh. S. M, Mahzan S, Sadikin A, Ahmad S
(2018) Experimental Dataset To Develop A Parametric Model Based Of Dc Geared Motor In Feeder Machine , INTERNATIONAL JOURNAL OF ELECTRICAL AND COMPUTER ENGINEERING (IJECE), Institute of Advanced Engineering and Science (IAES) , 6, 111, ISSN:20888708
Azmahani Sadikin, Mohd Khairul Anam Mohd Bahrin, Azzura Ismail, Al Emran Ismail, Sufizar Ahmad, Salihatun Salleh, Mohd Nasrull Abdol Rahman, Azwan Sapit, Sallehuddin Shah Ayop
(2018) Numerical Simulation In Transient Flow Of Non-Newtonian Fluid In Nozzles During Filling Process, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 3, 92, ISSN:2229838X
Azmahani Sadikin, Mohd Khairul Anam Mohd Bahrin, Azzura Ismail, Al Emran Ismail, Sufizar Ahmad, Salihatun Salleh, Mohd Nasrull Abdol Rahman, Azwan Sapit, Sallehuddin Shah Ayop
(2018) Numerical Simulation In Transient Flow Of Non-Newtonian Fluid In Nozzles, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 10, 92, ISSN:2229838X
Zulaikha ABDULLAH, Sufizar AHMAD, Murni Faridah M. RAFTER, Azmahani SADIKIN, Mohd Nasrull ABDOL RAHMAN and Azzura ISMAIL
(2018) The Effect Of Different Urea Composition On Production Of Porous Stainless Steel Type 316l Through Powder Metallurgy Technique, INTERNATIONAL JOURNAL OF CURRENT SCIENCE ENGINEERING & TECHNOLOGY, Advanced Materials Characterization Techniques , 3, 35, ISSN:25814311
Al Emran Ismail, Fazimah Mat Noor, Zaleha Mohamad, Mohd Amran Madlan, M. Zulafif Rahim, M. Rasidi Ibrahim, Sufizar Ahmad, Mohd Nasrull Abdol Rahman, Salihatun Md Salleh, Azmahani Sadikin, Shahruddin Mahzan, Nik Hisyamudin Muhd Nor
(2017) Effect Of Triggering Angles On The Crushing Mechanisms Of Hybrid Woven Kenaf/Aluminum Hollow Cylinders, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 12, 012034, ISSN:17426588
M.S.A. Bakar, H.A. Rahman, S.F. Mohammad, S. Ahmad and A. Muchtar
(2017) Morphological And Physical Behaviour Of Lscf-Sdcc-Ag Composite Cathode With The Incorporation Of Ag As An Additive Element, JOURNAL OF PHYSICS: CONF. SERIES, Institute of Physics Publishing , 10, 1, ISSN:17426588
Fazimah Mat Noor, Khairur Rijal Jamaludin and Sufizar Ahmad
(2017) Physical And Mechanical Characteristics Of Porous Ss316l For Biomedical Implant, SOLID STATE PHENOMENA, 2017 Trans Tech Publications, Switzerland , 10, 374, ISSN:16629779
H. Hassan, A. Ismail, S. Ahmad and C. F. Soon
(2017) Super-Hydrophobic Green Corrosion Inhibitor On Carbon Steel, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing Ltd , 9, 1, ISSN:1757-899X 215 0
K.W. Hor, S.M Salleh, Abdullah, Mohd Ezree, I. Zaman, M.H. Hatta, S. Ahmad, A.E Ismail,W.A.W Mahmud
(2017) Technology Model Of Aquaculture Production System, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 10, 1, ISSN:17426588
H.Taib, P.S. Abdul Rahim, M. S .Shamsudin, Rizamarhaiza M., N. A. Nazaruddin, M. Azham Azmi, S. Mahzan, S. Ahmad
(2017) The Effect Of Nickel Oxide (Nio) Compositions In Consolidation Of Silica-Nickel Oxide (Sio2-Nio) Foams Using Replication Method, JOURNAL OF MECHANICAL ENGINEERING, Institut Pengurusan Penyelidikan (RMI), Universiti Teknologi MARA , 12, 63, ISSN:18235514
Sufizar AHMAD
(2016) Characterization Of 316l Stainless Steel Foams For Biomedical Applications, MATERIALS SCIENCE FORUM, Trans Tech Publications , 1, 231, ISSN:0255-5476
Sufizar AHMAD
(2016) Effect Of Using Different Compositions And Pu Foam Template To Produce Cobalt Chromium Molybdenum (Cocrmo) Foams , MATERIALS SCIENCE FORUM , Trans Tech Publications , 1, 202, ISSN:0255-5476
S. Ahmad
(2016) Fabrication Of 316l Stainless Steel Foams Via Powder Metallurgy Technique , ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , Asian Research Publishing Network (ARPN) , 6, 7583, ISSN:1819-6608
Sufizar AHMAD
(2016) Physical Properties Of 316l Stainless Steel (Ss316l) Foam With Different Composition By Using Compaction Method , MATERIALS SCIENCE FORUM, Trans Tech Publications , 1, 289, ISSN:0255-5476
Syazwani Baharom, Sufizar Ahmad, Hariati Taib, and Rizamarhaiza Muda
(2016) The Effects Of Composition And Sintering Temperature On The Silica Foam Fabricated By Slurry Method , AIP CONFERENCE PROCEEDINGS, American Institute of Physics Publishing LLC , 7, 020004-1, ISSN:0094-243X
Sufizar AHMAD , M. ROSLI , Nur Suliani ABDUL MANAF, Murni Faridah MAHAMMAD RAFTER, F. Mat NOR
(2016) The Formation Of Cobalt Chromium Molybdenum (Cocrmo) Foams Fabricated By Slurry Method , MATERIALS SCIENCE FORUM , Trans Tech Publications , 1, 197, ISSN:0255-5476
Mohd Azham Azmi, Mohd Syahmi Muin @ Marsayid, Shahruddin Mahzan, Sufizar Ahmad, Hariati Taib
(2016) Vibration Exposure Analysis Of Polydimethylsiloxane Reinforced Silica Derived Rice Husk Ash, MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, Faculty of Science and Technology, Universiti Kebangsaan Malaysia , 7, 1138, ISSN:13942506
Mohd Azham Azmi, Mohd Syahmi Muin @ Marsayid, Shahruddin Mahzan, Sufizar Ahmad, Hariati Taib
(2016) Vibration Exposure Analysis Of Polydimethylsiloxane Reinforced Silica Derived Rice Husk Ash [Kajian Pendedahan Getaran Terhadap Polidimetilsiloksana Yang Diperkuat Silika Dari Abu Sekam Padi], MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, The Malaysian Analytical Sciences Society , 1144, ISSN:1394-2506
S. M. Yahya, A. Azmi, M. I. Idris, M. Z. Yunos, S. Mahzan, S. Ahmad, H. Taib
(2014) Short Review: Role Of Metal Oxides As Filler In Polysiloxane Sheet Composite, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 27, ISSN:16627482
Prosiding / Seminar
M. Azham Azmi, S. Mahzan, S. Ahmad, S.M. Salleh, H.A. Rahman, M.A.Choiron, A. Ismail, H.Taib
(2019) Vibration Exposure Of Polydimethylsiloxane (Pdms) Reinforced Silica (Sio2): Comparison Of Different Source Of Silica (Sio2) As Filler, IOP PUBLISHING LTD. , 1, ISBN:17578981
Siti Fairus Mohammad, Sufizar Ahmad, Hamimah Abdul Rahman, Andanastuti Muchtar, Khalid Saluiman Abdallah
(2018) Morphological And Physical Behaviour On The Sm0.5sr0.5coo3??/Sm0.2 Ce0.8o1.9 Incorporation With Binary Carbonate As Potential Cathode Materials For Sofc, TRANS TECH PUBLICATIONS, SWITZERLAND , 59, ISBN:16629795
Rizamarhaiza.M, S. Ahmad, H.A.Rahman, H.Taib
(2018) The Effect Of Sintering Temperature On Silica Derived From Rice Husk Ash - Nickel Oxide (Sio2-Nio) Foam Fabrication Via Slurry Technique, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17426588
Ong Pauline, Hariati Taib, Mohd AzwirAzlan, Nurul Fitriah Nasir, Mohd Azham Azmi, Saliha Md Salleh, Badrul Aisham Md Zain, Shahruddin Mahzan, Muhd Hafeez Zainulabidin, Sufizar Ahmad, Nasrull Abd Rahman, Zamani Ngali, Hamimah Abd Rahman
(2017) Assessment And Evaluation For Programme Learning Outcomes In Faculty Of Mechanical And Manufacturing Engineering, Universiti Tun Hussein Onn Malaysia, IOP Science , 1, ISBN:1757-899X
Siti Fairus Mohammad, Sufizar Ahmad, Hamimah Abdul Rahman, Andanastuti Muchtar
(2017) Diversification Studies On Samarium Strontium Cobaltite Regarding Thermal & Structural Properties As Based Composite Cathode Of Sofc, Trans Tech Publications Ltd , 162, ISBN:9783035710298
F. Mat Noor, K. R. Jamaludin , and S. Ahmad
(2017) Fabrication Of Porous Stainless Steel 316l For Biomedical Applications, EDP SCIENCES , 1, ISBN:2261236X
MOHD NASRULL ABDOL RAHMAN, SITI SHAFIKA MOHAMAD, SALIHATUN MD SALLEH, SHAHRUDDIN MAHZAN & SUFIZAR AHMAD
(2017) Feedback Survey On The Usability Of The Offera Method For Assessing An Exposure Risks Of Computer Work Related To Wmsds, MATEC WEB OF CONFERENCES , 1, ISBN:2261236X
H. Taib, S M Salleh, B A Md Zain, M.A. Azlan, S. Mahzan, Hafeez Z A, Ong, P., S. Ahmad, M. N.A Rahman, N.F. Nasir, M. Azham Azmi, H.A Rahman, Z.Ngali
(2017) Programme Learning Outcomes Assessment And Continuous Quality Improvement In Faculty Of Mechanical And Manufacturing, Uthm, Institute of Physics Publishing , 1, ISBN:17578981
Syazwani Baharom, Sufizar Ahmad, Muhamad Izranuddin Mohd Ramli
(2017) The Effect Of Different Silica Compositions To The Properties Of Silica Foam Fabricated Using Slurry Method, Trans Tech Publications Ltd , 121, ISBN:9783035710298
Zulaikha Abdullah, Sufizar Ahmad, Musfirah ramli
(2017) The Impact Of Composition And Sintering Temperature For Stainless Steel Foams (Ss316l) Fabricated By Space Holder Method With Urea As Space Holder, Trans Tech Publications Ltd , 413, ISBN:9783035710298
Fazimah Mat NOOR, Khairur Rijal JAMALUDIN, Sufizar AHMAD
(2016) Production Of Stainless Steel 316l Foam With Different Solid Loading, Trans Tech Publications , 321 , ISBN:978-303835537-3
Fazimah Mat Noor, N. I. Mat Rosip, K. R. Jamaludin, S. Ahmad
(2015) Effects Of Sintering Temperature On The Properties Of Stainless Steel Foam, Trans Tech Publications, Switzerland , 232 , ISBN:1662-8985
Linda Agun, Hamimah Abd.Rahman, Sufizar Ahmad, Andanastuti Muchtar
(2014) Durability And Stability Of Lscf Composite Cathode For Intermediate-Low Temperature Of Solid Oxide Fuel Cell (It-Lt Sofc): Short Review, TRANS TECH PUBLICATIONS , 732, ISBN:10226680
N.I. Mad Rosip, S. Ahmad, K.R. Jamaludin, F. Mat Noor
(2014) Morphological Analysis Of Ss316l Foam Produced By Using Slurry Method, Trans Tech Publications, Switzerland , 68 , ISBN:1662-8985
F. Mat Noor, K. R. Jamaludin, S. Ahmad, R. Ibrahim, N. I. Mat Rosip
(2013) Development And Characterization Of Ss316l Foam Prepared By Powder Metallurgy Route, Trans Tech Publications, Switzerland , 31 , ISBN:978-303835038-5
F. M. Noor, M. I. M. Zain, K. R. Jamaludin, R. Hussin, Z. Kamdi, A. Ismail, S. Ahmad, H. Taib
(2013) Potassium Bromide As Space Holder For Titanium Foam Preparation, Trans Tech Publications, Switzerland , 922 , ISBN:978-303785933-9
N. I. Mad Rosip, S. Ahmad, N. L. Arpawi, K. R. Jamaluddin,F. Mat Noor
(2013) The Effect Of Sintering Temperature And Composition For Density And Porosity Of Ss316l Foam, Trans Tech Publications, Switzerland , 988 , ISBN:978-303785933-9
Sufizar Binti Ahmad
(2009) A Review Of Workability Of Wrought Magnesium Alloys
Sufizar Binti Ahmad
(2009) Characterisation Of Titanium Alloy Feedstock For Metal Injection Moulding Using Palm Stearin Binder System
Sufizar Binti Ahmad
(2009) Feedstock Characterisation Of Titanium Alloy Mix With Palm Stearin Binder System For Metal Injection Moulding
Sufizar Binti Ahmad
(2009) Injection Molding Parameter Optimization Of Titanium Alloy Powder Mix With Palm Stearin And Polyethylene For Green Defects Using Taguchi Method
Sufizar Binti Ahmad
(2009) Kesan Suhu Pensinteran Dan Komposisi Titanium Tulen Terhadap Peratus Keliangan Sampel Selepas Disinter
Sufizar Binti Ahmad
(2009) Magnesium Alloy Metal Injection Molding Using Wax-Based Binder System
Sufizar Binti Ahmad
(2009) Moulding Parameter Optimisation For The Best Sintered Density
Sufizar Binti Ahmad
(2009) Optimisation Of Injection Parameter In Metal Injection Molding (Mim) Process
Sufizar Binti Ahmad
(2009) Optimisation Of Processing Parameters Of Titanium Alloy Foams Using Taguchi Method For Improved Electrical Conductivity
Sufizar Binti Ahmad
(2009) Optimisation Of Processing Parameters Of Titanium Foams Using Taguchi Method For Improved Electrical Conductivity
Sufizar Binti Ahmad
(2009) Optimisation Of The Sintering Parameters For Density Of Titanium Foams Using Taguchi Method
Sufizar Binti Ahmad
(2009) Optimization Of Micro Metal Injection Molding For Highest H By Green Strength By Using Taguchi Method
Sufizar Binti Ahmad
(2009) Optimization Of Micro Metal Injection Molding For The Highest Green Strength By Using Taguchi Method
Sufizar Binti Ahmad
(2009) Orthogonal Array Technique For Optimizing The Sintering Parameter Of The Metal Injection Molding (Mim) Compact: Best Flexure Strength
Sufizar Binti Ahmad
(2009) Penghasilan Titanium Aloi Berbusa Dengan Menggunakan Teknik Span Polimer
Sufizar Binti Ahmad
(2009) Preparation Of Titanium Pure Foams Using Different Atmosphere Of Sintering
Sufizar Binti Ahmad
(2009) Rheological Characteristic Of Ss316l For Micromim
Sufizar Binti Ahmad
(2009) Rheological Characterization Of Water Atomised Stainless Steel Powder For Micro Metal Injection Molding
Sufizar Binti Ahmad
(2009) Sintering Parameter Optimization With Quality Engineering Technique: Best Flexure Strenght
Sufizar Binti Ahmad
(2009) Sintering Study Of Titanium Alloy Foam Prepared By The Sponge Technique
Sufizar Binti Ahmad
(2009) Taguchi Method For The Determination Of Optimised Sintering Parameters Of Titanium Alloy Foams
Sufizar Binti Ahmad
(2009) Temperature Influence To Solvent Debinding Of Metal Injection Molding (Mim) Components
Sufizar Binti Ahmad
(2009) The Influence Of Ss316lS Particle Shape On The Metal Injection Molding
Sufizar Binti Ahmad
(2008) Analisis Taburan Saiz Partikel Serbuk Ss316l Bagi Kegunaan Proses Penyuntikan Acuan Logam
Sufizar Binti Ahmad
(2008) Characterisation Of Titanium Foam From Titanium Alloy (Al3ti) Using The Slurry Method
Sufizar Binti Ahmad
(2008) Densification Of Ss316l Gas-Atomized And Water-Atomized Powder Compact
Sufizar Binti Ahmad
(2008) Effect Of Anodizing Time To The Properties Of Aa6061 And Aa6063
Sufizar Binti Ahmad
(2008) Kajian Prestasi Penyahikatan Larutan Dengan Menggunakan Kaedah Taguchi
Sufizar Binti Ahmad
(2008) Kesan Suhu Penyuntikan Yang Tidak Optimum Terhadap Kecacatan Jasad Anum Pada Proses Penyuntikan Logam (Mim)
Sufizar Binti Ahmad
(2008) Metal Injection Moulding Of Titanium Using Palm Stearin Based Binder
Sufizar Binti Ahmad
(2008) Pembangunan Dan Penghasilan Titanium Berbusa
Sufizar Binti Ahmad
(2008) Pembebanan Serbuk Yang Optimum Bagi Bahan Suapan Daripada Ss 316l, Peg, Pmma Dan As Bagi Proses Pengacuan Suntikan Logam (Mim)
Sufizar Binti Ahmad
(2008) Pencirian Sifat Mekanikal Dan Fizikal Titanium Berbusa Yang Dihasilkan Pada Suhu Pensinteran Yang Berbeza
Sufizar Binti Ahmad
(2008) Pengacuan Suntikan Logam (Mim) Bagi Serbuk Titanium Dengan Sistem Bahan Pengikat Stearin Sawit
Sufizar Binti Ahmad
(2008) Pengaruh Tekanan Penyuntikan, Suhu Penyuntikan Dan Beban Serbuk Terhadap Ketumpatan Jasad Anum: Analisis Varian
Sufizar Binti Ahmad
(2008) Penghasilan Titanium Tulen (Ti) Dengan Menggunakan Kaedah Buburan
Sufizar Binti Ahmad
(2008) Production Of Titanium Foam From Titanium Alloy (Al3ti) Using The Slurry Method
Sufizar Binti Ahmad
(2008) Rheological Characteristic Of Water Atomised Stainless Steel Powder For Micro Metal Injection Molding
Sufizar Binti Ahmad
(2008) Sintering Effect For Titanium Foam Prepared By Slurry Method
Sufizar Binti Ahmad
(2007) Penghasilan Titanium Berbusa Dengan Menggunakan Kaedah Buburan
Sufizar Binti Ahmad
(2007) Preparation And Characterization Of Titanium Foam By Slurry Method
Sufizar Binti Ahmad
(2005) Effect Of Empty Fruit Bunch (Efb) Fibre Reinforced Low Density Polyethylene Epoxy (Ldpe) Composites On Mechanical Properties

Supervision

YearDescriptionRole
2014 supervisor for Musrifah Bt Ramli, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Assessor for the manuskip of 'Asas Seramik', Unimap, 2014 Assessor
2014 Supervisor for Muhammad Ilham bin Hasanudin, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 supervisor for Nor Azlin bt Ibrahim, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Yusuf bin Ja'afar, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Nur Raihan binti Zakaria, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Siti Shaidatul Safuraa Bt Che'om, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Redzwan bin Che Kamaruddin, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Yong Keat Yeong, B. Eng, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Referee for International Engineering Invention & Innovation Exhibition (i-ENVEX) 2014 Referee
2013 Supervisor for Mohd Faris bin Mohd Abdul Rahman, B. Eng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Nur Hanani binti Halim, B. Eng, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Examiner for Thesis: Sulistyo (2013): Synthesis of interlayer single cell for anode supported SOFC using pretreatment of ultrasound and ball milling process based on material NiO-YSZ-LSM Examiner
2012 Supervisor for Ahmad Zafuan bin Mohamed Anuar, B. Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Che Zairul Hakimi bin Che Ab Ghani, B. Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Supervisor for Mohd Khairulhazmi Bin Saleh, B. Eng, Universiti Tun Hussein Onn Malaysia, 2012 Supervisor
2012 Examiner for Thesis: Chan Wen Shan (2012): Characteristics of developed flexible polyurethane foams reinforced with coconut coir fibres and recycled tyres Examiner
2012 Supervisor for Ahmad Syar'i bin Mudani, B. Eng, Universiti tun hussein onn malaysia Supervisor
2011 Supervisor for MUHAMMAD ZULFAKAR B. ZAKARIA, B. Eng, Universiti tun hussein onn malaysia, 2011 Supervisor
2011 Supervisor for MOHD NORZAKWAN B. MD. NAJIB, B. Eng, Universiti tun hussein onn malaysia, 2011 Supervisor
2011 Supervisor for MOHAMAD AZIZI B. ABU KASIM, B. Eng, Universiti tun hussein onn malaysia, 2011 Supervisor
2009 Jurnal Institute of Engineers, Malaysia. Dispersion pattern of nanosize gold particles on mesoporous silica support Referee
2008 jurnal Institute of engineers Malaysia 2008, Keutuhan permukaan AlSlH13 keluli terkeras dalam proses pemesinan nyahcas elektrik (EDM) Referee
2008 Jurnal Institute of engineers, Malaysia. Development of heat treatment process through microstructural control in 2017 aluminium alloy for aerospace application Referee
2005 Mohd Zafifi bin Zakaria, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Pang Sze Han, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Naemah binti Mohamad, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Mohd Edhzuan bin Arbangai, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Jennifer Yeoh Siaw Ni, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Mohd Ridhuan bin Mohd Jamil, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Mohamad Subuhan bin Mohamed Zahabar, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2005 Mohd Sarizal bin Abu Bakar, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2005 Supervisor
2004 Lee Teik Peng, B. Eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2004 Supervisor
2004 Azmi bin Mohamed, B.eng., Kolej Universiti Teknologi Tun Hussein Onn Malaysia, 2004 Supervisor

« Back