Staff Profile

Full NamePROF. MADYA Dr. MOHAMMAD SUKRI BIN MUSTAPA
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN MEKANIK (JKM)
Email
Designation DS54 - PROFESOR MADYA
  PENYELIDIK UTAMA
PUSAT PENYELIDIKAN PENCEGAHAN KEGAGALAN MEKANIKAL DAN KEBOLEHARAPAN (MPROVE)
FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN

Field of Expertise

Field Category (KPT) APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES
Field (KPT) Applied Science and Technology
Field of Specialization (KPT) Applied Science and Technology

Areas of Research Interest

1. Fatigue and Fracture Mechanics
2. Structural Integrity of Metal and Nature Fibre
3. Recycling of Materials
4. Fibre Composites

Innovation Field of Interest

1. Green of Technology

Academic Qualification

YearQualificationInstitution
2010 DOKTOR FALSAFAH KEJURUTERAAN SAINS BAHAN NAGAOKA UNIVERSITY OF TECHNOLOGY
2002 SARJANA KEJURUTERAAN MEKANIKAL INSTITUT TEKNOLOGI TUN HUSSEIN ONN
1999 DIPLOMA KEJURUTERAAN MEKANIKAL INSTITUT TEKNOLOGI TUN HUSSEIN ONN
1997 SARJANA MUDA JENTERA AM INSTITUT TEKNOLOGI TUN HUSSEIN ONN
1992 CERTIFICATE/SIJIL KEJURUTERAAN MEKANIKAL POLITEKNIK

Professional Appointments

DS54 - Profesor Madya

Management Experience

DateDescription
11/02/2018 - 10/02/2021 Penyelidik Utama
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Penyelidikan Pencegahan Kegagalan Mekanikal dan Keboleharapan (MPROVE)
01/04/2017 - 31/03/2018 Felo Pelajar Tanpa Asrama
Kolej Kediaman Taman Universiti dan Pelajar Tanpa Asrama, Unit Pentadbiran
16/10/2016 - 15/10/2017 Felo
Institut Ahli Sunnah Wal Jamaah
01/10/2014 - 30/09/2015 Felo Kolej Kediaman
Pusat Perumahan dan Pengangkutan Pelajar, Kolej Kediaman Tun Dr. Ismail
01/05/2011 - 30/04/2013 Ketua Pejabat
Pejabat PNC (Hubungan Industri Dan Masyarakat), Pejabat Hubungan Universiti Dan Masyarakat
01/08/2010 - 31/07/2012 Ketua Jabatan
Pejabat PNC (Hubungan Industri Dan Masyarakat)
15/08/2006 - 14/08/2008 Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Mekanik (JKM)

Professional Societies

YearDescriptionRoleLevel
15/10/2008 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2017 Dynamics [BDA20103], Sesi 20162017 Semester 2, UTHM, 2017 University
2017 Dynamics [BDA20103], Sesi 20162017 Semester 1, UTHM, 2017 University
2017 Finite Element Method [BDA31003], Sesi 20162017 Semester 2, UTHM, 2017 University
2016 Dynamics [BDA20103] Sesi 20152016 Semester 2, UTHM, 2016 University
2015 Statik [BDA 10203}, Sesi 20142015 Semester 2, UTHM, 2015 University
2015 Teknologi Kejuruteraan Mekanikal [BBL 30802}, Sesi 20142015 Semester 2, UTHM, 2015 University
2015 Teknologi Industri [BBT 20403}, Sesi 20142015 Semester 2, UTHM, 2015 University
2015 Dynamics [BDA20103], Sesi 1 20152016 Semester 1, UTHM, 2015 University
2015 Mekanik Pepejal 1 [BDA 10402 }, Sesi 20142015 Semester 2, UTHM, 2015 University
2014 Stress Analysis [BDC40203], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Mechanics of Materials [BDA40203], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Fracture and Failure Mechnism [MDM1050], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Mekanikal Sains [BEF25903], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Kaedah Unsur Terhingga [BDA31003], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Analisis Tegasan [BDC40203], Sesi 20142015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Statik [BDA10203], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Teknologi Industri [BBT20403], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2014 Teknologi Kejuruteraan Mekanikal [BBL30802], Sesi 20142015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Stress Analysis [BDC40203], Sesi 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Teknlogi Elektrik dan Elektronik [BBR31603], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Analisis Tegasan [BDC40203], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Fracture and Failure Mechanisms [MDM 10503], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Fracture and Failure Mechanisms [MDM 10503], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Analisis Tegasan [BDC40203], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Mekanik Pepejal II [BDA20903], Sesi 20132014 Semester 1, Universiti Tun Hussein Onn Malaysia, 2013 University
2013 Mekanik Pepejal II [BDA20903], Sesi 20132014 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Mekanik Pepejal I [BDA 10402 / 10903], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Analisis Tegasan [BDC 4033], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Analisis Tegasan [BDC 40203], Sesi 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Mekanik Pepejal I [BDA 10402 / 10903], Sesi 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2012 University
2012 Fracture and Failure Mechanisms [MDM 10503], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University
2011 Mekanik Pepejal II [BDA3033], Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Fatigue and Fracture Mechanics [BDC40503], Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Fracture and Failure Mechanisms [MDM 10503], Sesi 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Analisis Tegasan [BDC 4033], Sesi 20112012 Semester 2, Universiti Tun Hussein Onn Malaysia, 2011 University
2011 Fracture and Failure Mechanisms [MDM 10503], Sesi 20112012 Semester 1, Universiti Tun Hussein Onn Malaysia, 2011 University
2010 Makmal Mekanik Pepejal [BDA2711], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Mekanik Pepejal [BDA3701], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Mekanik Pepejal I [BDA 10402], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Fracture and Failure Mechanisms [MDM 10503], Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Mekanik Pepejal II [BDA3701], Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Mekanik Pepejal II [BDA3033], Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Mekanik Pepejal II [BDA3033], Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2009 Makmal Mekanik Pepejal [BDA2711], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Mekanik Pepejal I [BDA 10402], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Mekanik Pepejal II [BDA3033], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Mekanik Pepejal [BDA3701], Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2006 Mekanik Pepejal I [BDA 2711], Sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Mekanik Pepejal II [BDA 3033], Sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Mekanik Pepejal II [BTM 2072], Sesi 2006 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Mekanik Pepejal II [BDA 3033], Sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2006 Mekanik Pepejal II [BDA 3033], Sesi 20062007 Semester 1, Universiti Tun Hussein Onn Malaysia, 2006 University
2005 Makmal Mekanik Mesin 1 [DDA2711], Sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Mekanik Pepejal I [BKM 2123], Sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Mekanik Pepejal 1 [BTM 2032], Sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Mekanik Pepejal II [BKM 3123], Sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Makmal Mekanik Mesin [DDA2711], Sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Mekanik Pepejal I [BKM 2123], Sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Mekanik Pepejal I [BTM 2032], Sesi 20052006 Semester 2, Universiti Tun Hussein Onn Malaysia, 2005 University
2005 Mekanik Pepejal II [BKM 3123], Sesi 20052006 Semester 1, Universiti Tun Hussein Onn Malaysia, 2005 University
2004 Mekanik Pepejal II [BKM 3123], Sesi 20042005 Semester 1, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Mekanik Pepejal II [BTM 2072], Sesi 20042005 Semester 1, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Mekanik Pepejal II [BTM 2072], Sesi 20042005 Semester 3, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Mekanik Pepejal II [BKM 3123], Sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Mekanik Pepejal II [BKF 4123], Sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Mekanik Pepejal II [BTM 4904], Sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia, 2004 University
2004 Mekanik Pepejal II [BTM 2072], Sesi 20042005 Semester 2, Universiti Tun Hussein Onn Malaysia, 2004 University
2003 Mekanik Kejuruteraan [BKF 1123], Sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia, 2003 University
2003 Mekanik Pepejal II [BTM 2072], Sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia, 2003 University
2003 Mekanik Pepejal II [BKM 3123], Sesi 20032004 Semester 2, Universiti Tun Hussein Onn Malaysia, 2003 University
2003 Mekanik Pepejal II / BKM 3123], Sesi 20032004 Semester 2, Universiti Tun Hussein Onn Malaysia, 2003 University
2003 Mekanik Pepejal II [BMM 3104], Sesi 20032004 Semester 2, Universiti Tun Hussein Onn Malaysia, 2003 University
2003 Mekanik Pepejal II [BKM 3123], Sesi 20032004 Semester 1, Universiti Tun Hussein Onn Malaysia, 2003 University
2002 Mekanik Kejuruteraan [BKF 1123], Sesi 20022003 Semester 1, Universiti Tun Hussein Onn Malaysia, 2002 University
2002 Mekanik Pepejal II [DKM 1123], Sesi 20022003 Semester 1, Universiti Tun Hussein Onn Malaysia, 2002 University
2002 Mekanik Bendalir [BKF 1213], Sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia, 2002 University
2002 Kemahiran Foundry [BMM 2803], Sesi 20022003 Semester 3, Universiti Tun Hussein Onn Malaysia, 2002 University
2002 Mekanik Pepejal II [BMM 3104], Sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia, 2002 University
2002 Mekanik Pepejal II [BTM 2073], Sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia, 2002 University
2002 Mekanik Kejuruteraan [BKF 1123], Sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia, 2002 University
2001 Kemahiran Foundry [DTM 2103], Sesi 2001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2001 University
2001 Mekanik Kejuruteraan [DTM 2083], Sesi 2001 Semester 3, Universiti Tun Hussein Onn Malaysia, 2001 University
2001 Amali [DTM 2083], Sesi 2001 Semester 3, Universiti Tun Hussein Onn Malaysia, 2001 University
2001 Bengkel Kimpalan [DTM 1021], Sesi 2001 Semester 3, Universiti Tun Hussein Onn Malaysia, 2001 University
2000 Kemahiran Foundry II [DTJ 3023], Sesi 20002001 Semester 3, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Mekanik Pepejal [DKM 2033], Sesi 20002001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Mekanik Mesin [DTM 2053], Sesi 20002001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Kemahiran Foundry 1 [DTM 2063], Sesi 20002001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Grafik Kejuruteraan [BEE 1023], Sesi 20002001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2000 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
K067 Effect of rice husk silica as reinforcement on physical and mechanical properties of recycled aluminium chip AA7075 Ahli 31/12/2020
H085 Potential Study of Recycling Aluminium Alloy Chip (AA6061) on Structural Integrity Material in Automotive Application Ahli 30/06/2020
H181 FATIGUE PERFORMANCE OF TUNGSTEN CARBIDE THERMAL SPRAY COATING ON CARBON STEEL FOR DIGESTER APPLICATION Ahli 30/06/2020
U965 Potential of polypropylene composite reinforced kenaf fiber in dynamic structural application Ketua 30/04/2020
U931 Effects of Reinforced Materials in Functional Performance of Solid-State Recycling Aluminium Alloy by Hot Equal Channel Angular Pressing (ECAP) Method Ahli 31/08/2019
1596 A New Approach of Recycling Aluminium Alloy Chip (AA6061) Integrated With Particulate Silicon Carbide as an Alternative Metal Matrix Composite Material Ketua 31/07/2019
1546 A New Approach of Using Natural Fibres-Based Polymer Composite for Dynamic Vibration Absorber Ahli 30/04/2019
U643 Investigation of Tungsten Carbide Thermal Spray Coating Tribological Performance on Carbon Steel Blade for Digester Application Ahli 31/07/2018
I008 Mesin Raut Daun Nenas Ahli 30/11/2017
U358 The Microstructure and Mechanical Properties of Aluminium Chips (AL6061) Composite Reinforced With Alumina Particles Ketua 30/11/2017
U485 Effect of Mechanical and Physical Properties of Recycled Aluminium Chip (AA6061) Reinforced with Silicon Carbide Ketua 31/08/2017
U486 Fatigue Behavior on Polypropylene Biocomposite Reinforced with Kenaf Fibre Ketua 31/08/2017
1276 Pemindahan Amalan Terbaik Bagi Sistem Pengurusan Tanah Perkuburan Islam (SPTPI) Berkonsepkan Taman Teknologi Menggunakan Aplikasi Sistem Maklumat Geografi (Geographical Information System-GIS) Ahli 31/05/2016
B045 PALF INTERGRATED MACHINE (PIM) Ahli 31/10/2015
0890 Exploration of CAD Parametric Features for Denture Components Design and Assembly Ahli 31/01/2014
0828 Direct Recycling of Automotive Scrap Material (Al 6060) in High Speed Machining Process - Propose Waste to Resources Ahli 31/12/2013
B005 Pineapple Leaf Fiber Paper Ahli 02/07/2013
0891 Biodiesel Production Based on Waste Cooking Oil : Promotion of the Establishment on the Integrated Sustainable Industry at Chip Crackers Factory in Batu Pahat Ahli 30/04/2013
0952 Maximize The Use Of Recycled Waste Paper Reinforced With Pineapple Leaf And Kenaf Fiber by Producing A New Product for Industry Application Ahli 28/02/2013
C002 Kajian "Graduate Employability (GE) Graduan Universiti Tun Hussein Onn Malaysia (UTHM) Ahli 31/12/2010

Publications

Book
UTHM
(2011) Icme 2011 : 2nd International Conference On Mechanical And Manufacturing Engineering 2011, UTHM , ., ISBN:9789675457647
UTHM
(2010) 50 Alumni Uthm: Kejayaan Didikan Plsp-Ittho, UTHM , ., ISBN:0000000000
Journal
N.F. Mohd Joharudin, N. Abdul Latif, M.S. Mustapa, M.N. Mansor, W.A. Siswanto, J. Murugesan, F. Yusof
(2019) Effect Of Amorphous Silica By Rice Husk Ash On Physical Properties And Microstructures Of Recycled Aluminium Chip Aa7075, MATERIALS SCIENCE AND TECHNOLOGY ENGINEERING, WILEY-V C H VERLAG GMBH , 3, 283, ISSN:09335137
RASIDI IBRAHIM, Chong Yee Long, Chee Yung Ng, Noor Hakim, Sukri Mustapa, Emran Ismail
(2018) Experimental Study On The Degree Of Surface Generation By Edge Preparation Tools In Milling 316l, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation Publisher of International Academic Journals , 12, 80, ISSN:2227-524
Mohamad M. F. F., Mohamad M. A. H, Mat W. A. W, Zaidi A. M., A Noraniah K, Zin A. F. M., Mustapa M. S., Mantari M. H. A. R.
(2018) Impact Resistance Study On Rigid Polyurethane Foam, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation Publisher of International Academic Journals , 11, 406, ISSN:2227524X
Nur Saadah Zainal, Zaleha Mohamad, Mohammad Sukri Mustapa, Nur Azam Badarulzaman, Zainathul Akhmar Salim Abdul Salim, and Mohd Idrus Masirin
(2018) Study Of Characteristics Of Rice Husk And Silica Obtained From Rice Husk, INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING AND APPLICATIONS, IACSIT Press , 10, 158, ISSN:20100221
Mohammad Sukri Mustapa, Noradila Abdul Latif, Nurul Farahin Mohd Joharudin, Shahruddin Mahzan, Mohd Idrus Masirin and Norashikin Abdul Hamid
(2018) The Effect Of Heat Treatment On Compression Strength Of Recycled Aa6061 Aluminium Chips, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 10, 124, ISSN:16629752
Muhammad Irfan Ab Kadir, Mohammad Sukri Mustapa, Nurul Liyana Rosli, Mohd Shahir Yahya, Mahmod Abd Hakim Mohamad, Abd Khalil Abd Rahim
(2018) The Effect Of Microstructures And Hardness Characteristics Of Recycling Aluminium Chip Aa6061/Al Powder On Various Sintering Temperatures , INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 1, 53, ISSN:26007916
Muhammad Muslimin Husin, Mohammad Sukri Mustapa, Md Saidin Wahab, Tajul Arifin, Ahmad Mubarak, Reventheran AL Ganasan, Farhana Hazwanee Jais
(2017) Characteristics On Treated Kenaf Fiber Reinforced Polypropylene Composites, MATERIALS SCIENCE FORUM, Trans Tech Publications , 11, 94, ISSN:16629752
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mahmod Abd Hakim Mohamad, Abdul L. M. Tobi, Muhammad Irfan Ab Kadir, Mohd Arif Samsi
(2017) Dry Sliding Wear Behavior Of The Reinforced By Graphite Particle And Heat Treated Of Recycled Aluminum Aa6061 Based Mmc Fabricated By Powder Metallurgy Method, KEY ENGINEERING MATERIALS, 2017 Trans Tech Publications, Switzerland , 3, 9, ISSN:1662-9795
Karim, M.A.A., Zaman, I., Rozlan, S.A.M., Berhanuddin, N.I.C., Manshoor, B., Mustapa, M.S., Khalid, A., Chan, S.W.
(2017) Structural Characterization And Mechanical Properties Of Polypropylene Reinforced Natural Fibers, JOURNAL OF PHYSICS: CONFERENCE SERIES, Institute of Physics Publishing , 10, 012035, ISSN:17426588
Mohd Tobi A.L., Zaman I., Mustapa M.S., Siswanto W.A., Mahzan S.
(2016) Case Study: Techniques For Material Characterization Of Brass Tensile Testing Fracture Sample, ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network , 8, 10128, ISSN:18196608
Ahmed Sahib Mahdi, Mohammad Sukri Mustapa, Mohammad Amry Lajis, Mohd Warikh Abd Rashid
(2016) Effect Of Compaction Pressure On Mechanical Properties Of Aluminium Particles Sizes Aa6061 Al Alloy Through Powder Metallurgical Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 4, 5155, ISSN:18196608
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mohd Amri Lajis, and Mohd Warikh Abd Rashi
(2016) Effect Of Sintering Temperature On Compression Strength And Microhardness Of Recycling Aluminium Alloy Aa6061 Through Ball Mill Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, APRN , 1, 659, ISSN:18196608
Murugesen Jayaprakash, Mohammad Sukri Mustapa, Sofian Mohd, Wan Nur Azrina Wan Muhammad, Nithya Gnana Poorani
(2016) Fatigue Behavior Of Aisi 304 Stainless Steel Under Fretting, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 6, 7655, ISSN:18196608
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Noradila Abdul Latif, Muhammad Irfan Ab Kadir, Mohd Arif Samsi
(2016) Heat Treatment For An Recycling Aluminum Aa6061 Using Milling Process At Various Holding Aging Time, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), IJET , 12, 2582, ISSN:09754024
Muhammad Irfan Ab Kadir, Mohammad Sukri Mustapa, Waluyo Adi Siswanto, Ahmed Sahib Mahdi, Mohd Arif Samsi
(2016) Microstructural And Physical Characteristics Of Recycling Aluminium Chips Aa 6061/ Al Powder Using Powder Metallurgy, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), IJET , 12, 2619, ISSN:09754024
A.S.MAHDI, M.S.MUSTAPA,A.L.M.TOBI,M.W.A.RASHID
(2016) Optimation Of The Milling Speed For An Recycling Aa6061 Alloy To Produce Small Particle Siza, SCIENCE INTERNATIONAL , Publications International Lahore, Pakistan , 1, 1111, ISSN:1013-5316
Mohd Sukri Mustapa, Ahmed Sahib Mahdi, Mohd Amri Lajis, Mohd Warikh Abd Rashid
(2016) Physical Properties Of Recycling Milled Aluminium Chip (Aa6061) For Various Sintering Temperature, INTERNATIONAL JOURNAL OF MECHANICAL AND INDUSTRIAL TECHNOLOGY, Springer , 10, 33, ISSN:23487593
Mohd Arif Samsi, Mohammad Sukri Mustapa, Nor Azam Badarulzaman, Ahmed Sahib Mahdi, Muhammad Irfan Abd Kadir
(2016) The Effect Of Aging On Physical Characteristis Of Recycled Aa6061 Aluminium Chips, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), IJET , 12, 2664, ISSN:09754024
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mohd Amri Lajis, Mohd Warikh Abd Rashid
(2016) The Effect Of Cold Compacting Parameter For Producing Recycles Aluminium By Milling Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 5, 6465, ISSN:18196608
Muhammad Muslimin Husin, Mohd Sukri Mustapa, Md Saidin Wahab, Mohd Yussni Hashim, Farhana Hazwanee Mohd Jais
(2016) The Morphology And Flexural Stress Of Surface Treated And Untreated Kenaf Fiber Reinforced Polypropylene Composites, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING (IJMME), IJENS , 12, 1, ISSN:22272771
Ahmed Sahib Mahdi, Mohd Sukri Mustapa, Mohd Amri Lajis, Mohd Warikh Abd Rashid
(2015) Compression Strength And Microhardness Of Recycling Milled Aluminium (Aa6061) For Various Binder, INTERNATIONAL JOURNAL OF MECHANICAL AND INDUSTRIAL TECHNOLOGY, Springer , 1, 98, ISSN:23487593
SSRN
(2015) Effect Of Compaction Pressure On Mechanical Properties Of Aluminium Particle Sizes Aa6061 Through Powder Metallurgical Process, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES , SSRN , 11, 659, ISSN:18196608
Ahmed Sahib Mahdi, Mohammad Sukri Mustapa, Mohammad Amry Lajis, Mohd Warikh Abd Rashid
(2015) Effect Of Compaction Pressure On Physical Properties Of Milled Aluminium Chip (Aa6061), INTERNATIONAL JOURNAL OF SCIENCE AND RESEARCH (IJSR), IJSR , 8, 1759, ISSN:23197064
Ahmed Sahib Mahdi, Mohammad Sukri Mustapa, Mohd Amri Lajis
(2015) Effect Of Holding Time On Mechanical Properties Of Recycling Aluminium Alloy Aa6061 Through Ball Mill Process, INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY, IAEME Publication , 9, 133, ISSN:09766359
UTHM
(2015) The Effects Of Heat And Compression On Moisture Content And Water Absorption Of Alf/Sugarcane Bagasse Composition In Disposable Plate Production, APPLIED MECHANICS AND MATERIALS , UTHM , 12, 272, ISSN:16627482
M. S. MUSTAPA, S. D. SABDIN, A. L. MOHD TOBI, M. S. WAHAB, M. R. M. YUNUS, Y. YUSOF
(2015) The Effects Of Heat And Compression On Moisture Content And Water Absorption Of Palf/Sugarcane Bagasse Composition In Disposable Plate Production, APPLIED MECHANICS AND MATERIALS, Trans Tech Pub , 1, 272, ISSN:16627482
Nurdin Ali, Mohamad Ali Fulazzaky, Muhammad Sukri Mustapa, Mohd Imran Ghazali, Muhammad Ridha, Tjipto Sujitno
(2014) Assessment Of Fatigue And Corrosion Fatigue Behaviours Of The Nitrogen Ion Implanted Cpti, INTERNATIONAL JOURNAL OF FATIGUE , ELSEVIER , 1, 184, ISSN:01421123
Mohammad Sukri Mustapa, Saiful Din Sabdin, Erween Abd Rahim, Md Saidin Wahab And Yusri Yusof
(2014) Effect Of Heat Compression On The Tensile Strength Of Palf/Sugarcane Bagasse For Disposable Plate, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 10, 362, ISSN:16627482
Nurdin Ali, M. S. Mustapa, M. I. Ghazali, T. Sujitno and M. Ridha
(2013) Fatigue Life Prediction Of Commercially Pure Titanium After Nitrogen Ions Implantation, INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING (IJAME), UMP , 6, 1005, ISSN:22298649
Yusri Yusof, Mohd Rizal Ahmad, Md Saidin Wahab, Mohammad Sukri Mustapa and Mohd Salleh Tahar
(2012) Producing Paper Using Pineapple Leaf Fiber, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 1, 3382, ISSN:16628985
Md Saidin Wahab, Erween Abdul Rahim, Mohd Sukri Mustapa and Norzaina Abdul Rahman
(2012) The Effect Of Laser Cutting Parameters On The Aerospace Structure Panel Of Cfrp Composite Material, APPLIED MECHANICS AND MATERIALS , Trans Tech Publications , 1, 127, ISSN:16627482
Mohammad Sukri Mustapa and Yoshiharu Mutoh
(2010) Effect Of Hardness Of Second Phase Particle On Fatigue Crack Growth Behavior Of Steels With Hard Second Phase Particle In Soft Ferrite Matrix, ADVANCED MATERIALS RESEARCH, Trans Tech Publications , 1, 775, ISSN:16628985
Mohammad Sukri Mustapa, Yoshiharu Mutoh
(2010) Effects Of Size And Spacing Of Uniformly Distributed Pearlite Particles On Fatigue Crack Growth Behavior Of Ferrite-Pearlite Steels, MATERIALS SCIENCE AND ENGINEERING A, Elsevier , 4, 2592, ISSN:09215093
Mohammad Sukri Mustapa, Yuichi Otsuka and and Yoshiharu Mutoh
(2009) Influence Of Second Phase Particle On Fatigue Crack Growth Behavior In Ferrite Matrix Steels, JOURNAL OF SOLID MECHANICS AND MATERIALS ENGINEERING, Trans Tech Publications , 5, 1101, ISSN:18809871
Prosiding / Seminar
Mohd Shahir bin Yahya , Ahmad Faiz Bin Mat Zian @ Mat Zin , Muhammad Hanafi Bin Asril Rajo Mantari , Mohammad Sukri Bin Mustapa , Musli bin Mohammad
(2019) Multipurpose Syariah-Compliant Tent (I-Tent), UITM CAWANGAN JOHOR , 582, ISBN:9789670841533
Mohammad Sukri Mustapa, Noradila Abdul Latif, Nurul Farahin Mohd Joharudin, Shahruddin Mahzan, Mohd Idrus Mohd Masirin, Norashikin Abdul Hamid
(2018) The Effect Of Heat Treatment On Compression Strength Of Recycled Aa6061 Aluminium Chips, SCIENTIFIC.NET , 124, ISBN:9783035713367
Mahdi A.S., Mustapa M.S., Mohamad M.A.H., Tobi A.L.M., Kadir M.I.A., Samsi M.A.
(2017) Dry Sliding Wear Behavior Of The Reinforced By Graphite Particle And Heat Treated Of Recycled Aluminum Aa6061 Based Mmc Fabricated By Powder Metallurgy Method, Trans Tech Publications Ltd , 9, ISBN:9783035711202
Che Berhanuddin N.I., Mohd Rozlan S.A., Zaman I., Mustapa M.S., Abdullah M.E., Bahrudin I.A.
(2017) Effect Of Thermal Expansion And Sonication On Mechanical Properties And Adhesive Toughness Measurement Of Polymer/Graphene Composite, Trans Tech Publications Ltd , 14, ISBN:9783038357704
Kadir M.I.A., Mustapa M.S., Mahdi A.S., Kuddus S., Samsi M.A.
(2017) Evaluation Of Hardness Strength And Microstructures Of Recycled Al Chip And Powder Aa6061 Fabricated By Cold Compaction Method., Institute of Physics Publishing , 99, ISBN:17578981
HUSIN M.M., MUSTAPA M.S., WAHAB M.S., ARIFIN A.M.T., MASIRIN M.I.M., JAIS F.H.
(2017) Flexural Properties Untreated And Treated Kenaf Fiber Reinforced Polypropylene Composites, AMERICAN INSTITUTE OF PHYSICS INC. , 89, ISBN:9780735415188
Husin M.M., Mustapa M.S., Wahab M.S., Arifin A.M.T., Masirin M.I.M., Jais F.H.
(2017) Mechanical Properties Untreated And Treated Kenaf Fiber Reinforced Polypropylene Composites, American Institute of Physics Inc. , 101, ISBN:9780735415188
Mahdi A.S., Mustapa M.S., Tobi A.L.M., Zaman I.
(2017) Micro-Hardness And Compression Strength Of Particle Sizes Recycling Aluminium Alloy Aa6061 Using Powder Metallurgy Method, Trans Tech Publications Ltd , 74, ISBN:9783038357780
Kadir M.I.A., Mustapa M.S., Latif N.A., Mahdi A.S.
(2017) Microstructural Analysis And Mechanical Properties Of Direct Recycling Aluminium Chips Aa6061/Al Powder Fabricated By Uniaxial Cold Compaction Technique, Elsevier Ltd , 687, ISBN:18777058
Muhammad Irfan Ab Kadir, Mohammad Sukri Mustapa, Mohd Rasidi Ibrahim, Mohd Arif Samsi, and Ahmed Sahib Mahdi
(2017) Microstructures And Characteristics Of Solid State Recycling Aluminium Chips Aa6061/Al-Sic Composites Fabricated By Cold Compaction Method, American Institute of Physics Inc. , 200, ISBN:0094243X
Samsi M.A., Mustapa M.S., Badarulzaman N.A., Lajis M.A., Kadir M.I.A., Mahdi A.S.
(2017) The Effect Of Quenching On Physical Characteristics Of Recycled Aa6061 Aluminum Chips, American Institute of Physics Inc. , 71, ISBN:9780735415188
Transtech publication
(2012) Fatigue Life Prediction Of Commercially Pure Titanium After Nitrogen Ions Implantation, Transtech publication , ISBN:.
Nagaoka University of Technology
(2007) Effect Of Microstructure On Fatigue Crack Growth Behavior Of Structural Steel, Nagaoka University of Technology , ISBN:.

Consultancies

YearDescriptionLevel
2015 Reviewer For International Journal Of Integrated Engineering (IIES2015) International
2015 Reviewer Malaysian Technical Universities Conference On Engineering And Technology (MUCET 2015) International
2014 International Journal Of Integrated Engineering (IIES2014) International
2014 Consultative Panel for the Professionalism Course Secondary School Principals Pasir Gudang, 2014 Government
2013 Reviewer For International Conference On Mechanical And Manufacturing Engineering 2013 (ICME2013) International
2013 Consultative Panel for the Appointment Services Designing Tools For Pineapple Leaf Fiber Processing, Pulp and Fiber Spinning Machine For Filling Pineapple Pineapple Fruit Collection, 2013 - 2014 University
2013 Consultative Panel for the Appointment Services Designing Tools For Pineapple Leaf Fiber Processing, Pulp and Fiber Spinning Machine For Filling Pineapple Pineapple Fruit Collection, 2013 - 2014 National
2012 Consultative Panel for the Pineapple Leaf Project In Producing Paper, 2012 University
2012 Reviewer For International Conference On Mechanical And Manufacturing Engineering 2012 (ICME2012) International
2011 Consultatie Panel for the Discussion and Refining MoU UTHM Berhad and Malaysian Palm Oil Board (MPOB), 2011 University
2011 Reviewer For International Conference On Mechanical And Manufacturing Engineering 2011 (ICME2011) International
2011 Consultative Panel for the Cooperation discussions UTHM- PERKIM, 2011 University
2011 Consultative Panel for the Discussion of Natural fibers Innovation Research, 2011 Private
2011 Reviewer For Indian Journal of Engineering and Materials Science, India International
2010 Consultative Panel for the Project Studies "Graduate Employability" UTHM Graduates, 2010 University
2010 Consultative Panel for the Asia-Pacific University-Community Engagement Network (APUCEN) at USM Penang, 2010 International
2010 Consultative Panel for the Visit of Special Discussion Cooperative Alumni UTHM (Uthmac) BHD Johor at EDC-UUM, 2010 University
2003 Consultative Panel for the Consultative Works examination: N / T RBK To Clinical And Kuaters 2G And Other Relevant Work In Simpang Enam, Rengit, 2003 Private

Supervision

YearDescriptionRole
2019 Panel Penilai Kurikulum sebagai Profesor Pelawat Universitas Muhammadiyah Kalimantan Timur External Assessor
2015 Supervisor for Nur Nadia Aini Binti Mohd Razali, BEng, UTHM, 2015 Supervisor
2015 Examiner for Thesis: Muheieddin Farag Elghanudi (2015): The Effect of Stress Corrosion Cracking on the Pipeline Integrity Examiner
2015 Examiner for Thesis: Muhammad Fadhil bin Sahrom (2015): Crushing on Composite tube Examiner
2015 Examiner for Thesis: Nagentrau a/l Muniandy (2015): Investigation on the Plastic Accumulation Under Tensile Testing Examiner
2015 Supervisor for Ahmed Saheb Mahdi, PhD, UTHM, 2015 Supervisor
2015 Supervisor for Muhammad Salihin Bin Md Yusof, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Muhammad Shaiful Bin Zakaria, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Muhammad Muslimin Bin Mat Husin, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Norazura Binti Mohamad Juberi, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Rohana Binti Khadir, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Husnul Khatimah Binti Ismail, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Zaida Azwani Binti Zawawi, BEng, UTHM, 2015 Supervisor
2015 Supervisor for Mohd Arif Bin Samsi, MEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Muhammad Muslimin, MEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Muhammad Irfan Bin Ab Kadir, MEng, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2014 Co-Supervisor for Nurdin Ali, PhD, UTHM, 2014 Supervisor
2014 Supervisor for Saiful Din Sabdin, MEng, UTHM, 2014 Supervisor
2014 Supervisor for Nurfarhana Binti Ishak, BEng, UTHM, 2014 Supervisor
2014 Examiner for Thesis: Mohd Aswadi b Che Abdul Aziz (2014): Fatigue Strength of Woven Kenaf Fibre Reinforced Composite Examiner
2014 Supervisor for Rafidah Binti Mhd Isa @ Mhd Sabri, BEng, UTHM, 2014 Supervisor
2014 Supervisor for Saiful Din bin Sabdin, MEng, UTHM, 2014 Supervisor
2014 Examiner for Thesis: Shaiful Rizal bin Zakaria (2014): Mechanical And Physical Behaviour Of Short And Randomly Oriented Banana Pseudo-stem Fiber Reinforced Epoxy Composite Examiner
2014 Supervisor for Muhamad Bin Sulaiman, BEng,UTHM, 2014 Supervisor
2014 Supervisor for Mohamad Zulkhairi Bin Zahari, BEng, UTHM, 2014 Supervisor
2014 Supervisor for Nurul Aini bt Zakaria, BEng,UTHM, 2014 Supervisor
2014 Supervisor for Mohamad Taufik bin Sulaiman, BEng,UTHM, 2014 Supervisor
2014 Supervisor for Siti Zanaqiah bt Md Nayan, BEng,UTHM, 2014 Supervisor
2014 Supervisor for Khairul Bin Yusof, BEng,UTHM, 2014 Supervisor
2014 Supervisor for Hazwani Bt Hasan, BEng,UTHM, 2014 Supervisor
2014 Supervisor for Nurul Fadzni Bt Yusof, BEng,UTHM, 2014 Supervisor
2014 Examiner for Thesis: Ashuvila Bt Aripin (2014): Feasibility of Non-Wood Plants as Alternative Fibres for PULP and Paper-Based Industries Examiner
2013 Supervisor for Siti Nor Azila Khalid, MEng, UTHM, 2012 Supervisor
2013 Supervisor for Ahmad Iqbal bin Sahir, BEng,UTHM, 2013 Supervisor
2013 Supervisor for Ahmad Iqbal Bin Sahir, BEng, UTHM, 2013 Supervisor
2013 Supervisor for Mahzan Binti Hassan, BEng, UTHM, 2013 Supervisor
2013 Supervisor for Hidayatullah Bin Masjud, BEng, UTHM, 2013 Supervisor
2013 Supervisor for Nur Fadzila Binti Hussain, BEng, UTHM, 2013 Supervisor
2013 Supervisor for Siti Nor Azila bt Khalid, MEng, UTHM, 2013 Supervisor
2013 Supervisor for Nurdin Ali, PhD, UTHM, 2013 Supervisor
2013 Supervisor for Norhayati Binti Mohd Ali, BEng, UTHM, 2013 Supervisor
2013 Supervior for Mahmood Abdul Hakim Mohammad, PhD, UTHM, 2013 Supervisor
2013 Examiner for Thesis: Nor Hazwani binti Abdullah (2013): A New Improvement of The Integrated Sustainable Industry At Chip Crackers Factory in Batu Pahat Examiner
2012 Supervisor for Amir Yusoff, MEng, UTHM, 2012 Supervisor
2012 Supervisor for Tuan Mohd Hafeez Bin Tuan Ibrahim, BEng, UTHM, 2012 Supervisor
2012 Examiner for Thesis: Nurul Azna Idayu bt Ab Aziz (2012): Characteris of Neck and Spine Under Side Collision Using Simulation Model Examiner
2012 Examiner for Thesis: Nurul saidatul syida bt Sulong (2012): Mechanical Stability Of Photo-Degradedation Sustainable Renewable Polymer Examiner
2012 Examiner for Thesis: S. Kanna A/L Subramaniyan (2012): Mechanical Behavior and Energy AbsorptionPerformance Composite Fillied Foam-Filled Circular Tubes Under Axial Loadings Examiner
2012 Supervisor for Amir bin Yusoff, MEng, UTHM, 2012 Supervisor
2012 Supervisor for Khairul Nizam Bin Sa'id, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Nurrul Rahmah Binti Mohd Yusoff, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Mohd Syafiq Bin Mohd Suri, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Mustaqim Bin Yahya, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Mohd Kamaruzzman Bin Mispon, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Nur Izyani Binti Mokhtar, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Mohd Sabree Bin Abd Wahab, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Muhamad Fuad Bin Abdul Halim, BEng, UTHM, 2012 Supervisor
2012 Supervisor for Mohd Hasrizal Bin Mohd Hussin, BEng, UTHM, 2012 Supervisor
2011 Examiner for Thesis: S. Kanna A/L Subramaniyan (2011): Study of Energy of Kenaf Foam Composite in Circular Tube Examiner
2011 Supervisor for Mohd Zikri Bin Zainol, BEng, UTHM, 2011 Supervisor
2011 Examiner for Thesis: Sharifah Nur Hidayah bt Syed Salleh (2011): To Develop National Framework Based on the Design Process for Sustainablity of E-Porduct Recycling Examiner
2011 Examiner for Thesis: Ade Firdianto (2011): Fatigue and Fracture in Powder Metallurgical Aluminium Metal Matrix Composites Examiner
2011 Supervisor for Mohd Azani Bin Mohamad Sulaimin, BEng, UTHM, 2011 Supervisor
2011 Supervisor for Muhammad Ameerul Asri Bin Rosli, BEng, UTHM, 2011 Supervisor
2006 Supervisor for Lee Chuan Foong, BEng, UTHM, 2006 Supervisor
2006 Supervisor for Tan Wang Shien, BEng, UTHM, 2006 Supervisor
2006 Supervisor for Siti Nurulhuda Bt Hj Md Ghazali, BEng, UTHM, 2006 Supervisor
2005 Supervisor for Abdul Saad Bin Salleh, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Lailatul Hamidah Binti Hj Md Hamdan, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Muhammad 'Aqil Bin Haji Hassan, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Teo Keng Chau, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Anuar Bin Ab Rani, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Kang Boon Siang, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Chin Wei Loong, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Haryani Bt Ahmad Khair, BEng, UTHM, 2005 Supervisor
2005 Supervisor for Mohamad Kamal Bin Samah, BEng, UTHM, 2005 Supervisor
2004 Supervisor for Mohd Farid Bin Manfar, BEng, UTHM, 2004 Supervisor
2004 Supervisor for Mohd Azhari Bin Abdullah, BEng, UTHM, 2004 Supervisor
2004 Supervisor for Che Haspu Robiah Binti Daud, BEng, UTHM, 2004 Supervisor
2004 Supervisor for Che Israihan Binti Che Ismail, BEng, UTHM, 2004 Supervisor
2004 Supervisor for Fethma Bte M.Nor, BEng, UTHM, 2004 Supervisor
2004 Supervisor for Mohd Khazaren Bin Kusaini, BEng, UTHM, 2004 Supervisor
2004 Supervisor for Mohd Ashraff Bin Ramli, BEng, UTHM, 2004 Supervisor
2003 Supervisor for Ahmad Rosdi Bin Abdul Rahim, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Tengku Azmie Bin Raja Hassan, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Mohamed Hairy Bin Yahya, BEng, UTHM Supervisor
2003 Supervisor for Shamsuddin Bin Abdullah, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Hafizan Bin Kosnin, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Mohammad Nazri Bin Rejab, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Mohamad Shukri Bin Muda, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Mohd Fathurrahman Bin Kamarudin, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Punithan A/L Tanahsingam, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Anuar Bin Abdul Kadir, BEng, UTHM, 2003 Supervisor
2003 Supervisor for Mohd Saifuddin Bin Ahmad, BEng, UTHM, 2003 Supervisor

« Back