Staff Profile

Full NameDr. SRI YULIS BINTI M AMIN
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN MEKANIK (JKM)
Email
Designation DS52 - PENSYARAH KANAN

Field of Expertise

Field Category (KPT) APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES
Field (KPT) Engineering Science and Technology
Field of Specialization (KPT) Engineering Science and Technology

Areas of Research Interest

1. Metal Injection Molding
2. Optimization tool (Taguchi Method, Response Surface Methodology)

Academic Qualification

YearQualificationInstitution
2015 DOKTOR FALSAFAH KEJURUTERAAN MEKANIK DAN BAHAN UNIVERSITI KEBANGSAAN MALAYSIA
2008 SARJANA KEJURUTERAAN MEKANIKAL (BAHAN) UNIVERSITI KEBANGSAAN MALAYSIA
2003 SARJANA MUDA KEJURUTERAAN MEKANIKAL KOLEJ UNIVERSITI TEKNOLOGI TUN HUSSEIN ONN

Professional Appointments

DS52 - Pensyarah Kanan

Management Experience

DateDescription
15/01/2016 - 31/12/2017 Penyelidik Kanan
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Pembuatan dan Bahan Termaju (AMMC)

Professional Societies

YearDescriptionRoleLevel
02/03/2012 - 31/12/9999 Board of Engineers Malaysia (BEM)
Jurutera Siswazah Kebangsaan

Teaching Experience

YearDescriptionLevel
2016 Solid Mechanics I [BDA10903], Session 20162017 Semester 1, 2016 University
2016 Finite Element Method [BDA31003], sesi 20162017 semester 1, 2016 University
2016 Finite Element Analysis [BDA31003], Sesi 20152016 Semester 2 University
2015 Dinamik [BDA20103], Sesi 20152016 Semester 1 University
2015 Dinamik [BDA20103], Sesi 20142015 Semester 1 University
2015 Dinamik [BDA20103], Sesi 20142015 Semester 2 University
2014 Dinamik [BDA20103], Sesi 20132014 Semester 2 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
H031 Flow Behaviour and Quality Characterisation through Processing Condition of Injected Mould Polypropylene-Nanoclay-Gigantochloa Scortechinii fibres. Ketua 30/06/2020
1592 Failure Prevention of Stents due to Hemodynamic and Arterial Wall Interactions. Ahli 31/07/2019
1590 CHARACTERIZATION OF SINTER-HIP AND MICROWAVE SINTERING PARAMETERS ON NANO GRAIN SIZE CEMENTED CARBIDE FOR METAL INJECTION MOLDING Ketua 31/01/2019
1595 Determining Flow Behavior and Characterization of Quality Through Processing Condition of Injected Mold Polypropylene-Nanoclay-Gigantochloa Scortechini fibers. Ahli 31/01/2019
U471 The Impact of Injection Molding Processing Conditions and Fiber Content Toward the Properties of Polypropylene-Nanoclay Nanocomposites Blend with Gigantochloa Scortechinii Fibers Ahli 28/02/2017
0665 Optimization Of Cycle Time For Hydraulic Press Bending & Cutting Operation For Phosphor Bronze Miniaturize Stamped Part I Ketua 14/06/2010

Publications

Journal
M. Prathabrao1,*, S.Y.M. Amin2, M.H.I. Ibrahim3, M.H. Othman4, S.N.A. Shahbudin5
(2019) Optimization Of Injection Molding Parameters For Wc-Tac-6co, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 1, 1, ISSN:2227524X
M. Prathabrao, Sri Yulis M. Amin, M.H.I. Ibrahim, M.H. Othman, S.N.A. Shahbudin
(2019) Optimization Of Injection Molding Parameters For Wc-Tac6co, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 1, 1, ISSN:22275248
S.N.A. Shahbudin, Sri Yulis M Amin, M.H. Othman, M.H.I. Ibrahim
(2018) Critical Powder Loading And The Rheology Of Nanosized Cemented Carbide With Titanium Carbide As Grain Growth Inhibitor For Injection Molding, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 8, 114, ISSN:2229838X
M.H.Othman, S.A.Osman, S.Y.M.Amin and M.S. Rosli
(2018) Modelling Of Integral Hinges Via Cadmould 3d -F Injection Moulding Simulation, JOURNAL OF ADVANCED RESEARCH IN DYNAMICAL AND CONTROL SYSTEMS, Elsevier , 12, 112, ISSN:1943023X
M. Prathabrao , M. H. I. Ibrahim, Sri Yulis M. Amin and M. H. Othman
(2018) Parameter Optimization Of Metal Injection Moulding: A Review, JOURNAL OF MECHANICAL ENGINEERING, Faculty of Mechanical Engineering, Universiti Teknologi MARA ( UiTM) , 5, 100, ISSN:18235514
M.H.Othman, M.H.I.Ibrahim, S.Y.M.Amin, M.S.Abdullah
(2018) Preparation Of Injection Moulding Processing For High Density Polyethylene Via Moldflow Advisor 2015 Simulation, ADVANCED SCIENCE LETTERS, American Scientific Publishers , 3, 1817, ISSN:18171822
S.N.A. Shahbudin, M.H. Othman, Sri Yulis M Amin, M.H.I. Ibrahim
(2017) A Review Of Metal Injection Molding- Process, Optimization, Defects And Microwave Sintering On Wc-Co Cemented Carbide, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 1, 1356, ISSN:17578981
M Prathabrao, Sri Yulis M Amin, M H I Ibrahim
(2017) Review On Sintering Process Of Wc-Co Cemented Carbide In Metal Injection Molding Technology, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 1, 1443, ISSN:17578981
Sri Yulis Binti M. Amin, Muhamad Ridhwan Bin Othman and Dominic Anak Empeni
(2016) Study On The Properties Of Sintered Body Of Wc-10%Co Produced By Metal Injection Molding (Mim), ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN). , 7, 8750, ISSN:18196608
Sri Yulis M. Amin
(2015) Micro-Powder Injection Molding Of Cemented Tungsten Carbide: Feedstock Preparation And Properties, CERAMICS INTERNATIONAL, Elsevier , 1, 3605, ISSN:02728842
Sri Yulis M. Amin, Norhamidi Muhamad, Khairur Rijal Jamaludin
(2013) Optimization Of Injection Molding Parameters For Wc-Co Feedstocks, JURNAL TEKNOLOGI (SCIENCES AND ENGINEERING), UTM Press , 7, 51, ISSN:01279696
Prosiding / Seminar
M.H.OTHMAN, M.S.ROSLI, S.HASAN, A.M. AMIN, M.Y.HASHIM, O.M.F.MARWAH AND S.Y.M. AMIN.
(2018) The Optimisation Of Processing Condition For Injected Mould Polypropylene-Nanoclay-Gigantochloa Scortechinii Based On Melt Flow Index, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
M.H. Othman, S. Hasan, S.Z. Khamis, M.H.I Ibrahim, S.Y. M.Amin
(2017) Optimisation Of Injection Moulding Parameter Towards Shrinkage And Warpage For Polypropylene-Nanoclay-Gigantochloa Scortechinii Nanocomposites, Elsevier Science Direct , 673, ISBN:1877-7058
S.N.A. Shahbudin, M.H. Othman, Sri Yulis M Amin, M.H.I. Ibrahim,
(2017) Review Of Metal Injection Molding- Process, Optimization, Defects And Microwave Sintering On Wc-Co Cemented Carbide, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
SRI YULIS BT M. AMIN1a , MUHAMMAD AMIR HAKIM BIN ABD WAHAB1b & MOHD HALIM IRWAN IBRAHIM1c
(2016) Finite Element Modelling Of Rotary Dryer Machine With Moisture Fiber Content, UKM , 167, ISBN:978967136251
M. Amin, Sri Yulis
(2012) Optimising Injection Moulding Parameter That Satisfies Part Qualities By Using Taguchi Method, IEEE
Othman, Mohd Hilmi and M.Amin, Sri Yulis
(2012) Optimising Injection Moulding Parameters That Satisfies Part Qualities By Using Taguchi Method, IEEE XPLORE , 307, ISBN:9781467304269
Sri Yulis M. Amin
(2012) Optimization Of Injection Molding Parameters On The Density Of Wc-Co Green Part Through Pim, IMM
Sri Yulis M. Amin
(2012) Processing And Characterization Of Cemented Carbide Injection Molding, UKM
Sri Yulis M. Amin
(2012) Rheological Properties Analysis Of Wc-Co Injection Feedstock , University of Wollongong
Sri Yulis M. Amin
(2011) Ball Milling Of Wc-Co Powder As Injection Molding Feedstock, IACSIT
Sri Yulis M. Amin
(2011) Characterization Of Feedstock Properties Of Pim Wc-Co With Palm Stearin Binder System, UKM
Sri Yulis M. Amin
(2010) Development Of New Feedstock Formulation Based On Palm Stearin For Pim Of Wc-Co Hardmetals, AMREC SIRIM

Consultancies

YearDescriptionLevel
2014 Perunding bagi Projek International Integrated Engineering Summit 2014 International

Supervision

YearDescriptionRole
2016 Supervisor for Muhammad Amir Hakim Bin Abd Wahab, PSM, 2016 Supervisor
2016 Supervisor for Mohamad Razif bin Mohamad, PSM, 2016 Supervisor
2016 Reviewer of paper for 7th International Conference on Mechanical and Manufacturing Engineering (ICME 2016) Assessor
2015 Supervisor for Dominic Anak Empeni, PSM, 2015 Supervisor
2015 Supervisor for Muhamad Ridhwan Othman, PSM, 2015 Supervisor
2015 Supervisor for Azmil bin Abdullah, PSM, 2015 Supervisor
2015 Supervisor for Nor Azimah Binti Mustaffa, PSM, 2015 Supervisor
2015 Supervisor for Hazwani Auji binti Ab Rahim, PSM, 2015 Supervisor
2015 Supervisor for Zahariah Binti Zainal Abidin, PSM, 2015 Supervisor
2015 Penyelia Latihan Industri untuk 16 orang pelajar Sarjana Muda pada 11- 13 Ogos 2015 Supervisor
2010 Supervisor for Tan Hee Khiem, PSM, 2010 Supervisor
2010 Supervisor for Wan Faisal bin Wan Ahmed, PSM, 2010 Supervisor
2010 Supervisor for Sun Chern Ling, PSM, 2010 Supervisor
2010 Supervisor for Mohd Khairul Anuar bin Che Abdul Hamid, 2010 Supervisor
2009 Supervisor for Mahfuzah binti Abd. Salam, PSM, 2009 Supervisor

Extension & Public Services

YearDescriptionLevel
2016 Chairperson in the International Conference on Advanced Processes & Systems in Manufacturing (APSIM 2016) International
2016 AJK PERKASA UTHM untuk sesi 2016-2018 University

« Back