Staff Profile
| Full Name | Dr. MOHD YUSSNI BIN HASHIM |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN PEMBUATAN DAN INDUSTRI (JKPI) |
| Designation | DS52 - PENSYARAH KANAN |
|
KETUA JABATAN JABATAN TEKNOUSAHAWAN PELAJAR PUSAT TEKNOUSAHAWAN PELAJAR |
Field of Expertise
| Field Category (KPT) | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
|---|---|
| Field (KPT) | Applied Science and Technology |
| Field of Specialization (KPT) | Applied Science and Technology |
Areas of Research Interest
| 1. | Natural Fiber |
| 2. | Casting |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2016 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2007 | SARJANA KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2001 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | TOTTORI UNIVERSITY |
Professional Appointments
| DS52 - Pensyarah Kanan |
Management Experience
| Date | Description |
|---|---|
| 01/04/2019 - 31/12/2019 | Ketua Jabatan
Pusat Teknousahawan Pelajar, Jabatan Teknousahawan Pelajar |
| 01/01/2018 - 31/03/2019 | Ketua Jabatan (Jabatan Keusahawanan Pelajar)
Pejabat Penolong Naib Canselor (Kelestarian Kewangan), Pusat Perniagaan dan Keusahawanan |
| 01/09/2008 - 31/08/2010 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 09/08/2004 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Jurutera Siswazah | Kebangsaan |
Research Grants And Contracts
Publications
| Journal |
|---|
| M.S. Shukri, O.M.F. Marwah, M. Ibrahim, S. Sharif, E.J. Mohamad, M.Y. Hashim (2018) Collapsibility Of Pmma Based Material In Direct Investment Casting, JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (JAMT), UNIVERSITI TEKNIKAL MELAKA , 1, 501, ISSN:19853157 |
| Mohd Yussni Hashim, Azriszul Mohd Amin, Omar Mohd Faizan Marwah, Mohd Hilmi Othman, Muhammad Akmal Johar, Ng Chuan Huat, S.B. Mamat (2018) Interfacial Shear, Tensile Strength And Young Modulus Of Kenaf Fiber : The Effects From Different Settings Of Alkali Treatment, KEY ENGINEERING MATERIAL, Trans Tech Publications , 11, 10, ISSN:16629795 |
| Ezazul Fahmee Ahmad Jamal, Mohd Yusni Hashim, Mohd Hilmi Othman, Omar Mohd Faizan Marwah, Azriszul Mohd Amin, Muhammad Akmal Johar and Ng Chuan Huatl (2018) Optimization Of Alkali Treatment Condition On Tensile Properties Of Kenaf Reinforced Polyester Composite Using Response Surface Method, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 4, 40, ISSN:2229838X |
| M.H.Othman, M.H.I.Ibrahim, A.M.Amin,M.Y,Hashim, C.H.Ng, S.A.Osman, O.M.F.Marwah, M.F.Shaari, N.H.Rafai, M.A.Johar (2018) The Optimisation Of Processing Conditions And The Effect Of Nanoclay Towards Snap Fit Samples, INTERNATIONAL JOURNAL OF PURE AND APPLIED MATHEMATICS, Academic Publications, Ltd , 3, 1, ISSN:13143395 |
| Mohd Yussni Hashim, Azriszul Mohd Amin, Omar Mohd Faizan Marwah, Mohd Hilmi Othman, Mohd Radzi Mohamed Yunus and Ng Chuan Huat (2017) The Effect Of Alkali Treatment Under Various Conditions On Physical Properties Of Kenaf Fiber , JOURNAL OF PHYSICS: CONFERENCE SERIES, IOP Science , 10, 1, ISSN:17426596 |
| O.M.F. Marwah, S. Sharif, M.S. Shukri, E.J. Mohamad, M.F. Shaari, M.Y. Hashim (2016) Process Parameters Evaluation For Direct Investment Casting, INTERNATIONAL JOURNAL OF MECHANICAL AND MECHATRONICS ENGINEERING, The Int. Journals of Engineering adn Sciences (IJENS) , 1, 89, ISSN:2227-2771 |
| Mohd Yussni Hashim, Mohd Nazrul Roslan, Omar Mohd Faizan Marwah, Shahruddin Mahzan@Mohd Zin and Saparudin Ariffin (2016) The Effect Of Alkali Treatment Conditions On Tensile Strength Of Kenaf Fiber, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 8658, ISSN:18196608 |
| Hashim M.Y., Roslan M.N., Marwah O.M.F., Mahzan S., Zin M., Ariffin S. (2016) The Effect Of Alkali Treatment Conditions On Tensile Strength Of Kenaf Fiber, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 8662, ISSN:18196608 |
| Muhammad Muslimin Husin, Mohd Sukri Mustapa, Md Saidin Wahab, Mohd Yussni Hashim, Farhana Hazwanee Mohd Jais (2016) The Morphology And Flexural Stress Of Surface Treated And Untreated Kenaf Fiber Reinforced Polypropylene Composites, INTERNATIONAL JOURNAL OF MECHANICAL & MECHATRONICS ENGINEERING (IJMME), IJENS , 12, 1, ISSN:22272771 |
| Mohd Yussni Hashim, Mohd Nazrul Roslan, Shahruddin Mahzan @ Mohd Zin and Saparudin Ariffin (2014) Impact Of Alkali Treatment Conditions On Kenaf Fiber Polyester Composite Tensile Strength, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 11, 285, ISSN:16627482 |
| Prosiding / Seminar |
| M.H.OTHMAN, M.S.ROSLI, S.HASAN, A.M. AMIN, M.Y.HASHIM, O.M.F.MARWAH AND S.Y.M. AMIN. (2018) The Optimisation Of Processing Condition For Injected Mould Polypropylene-Nanoclay-Gigantochloa Scortechinii Based On Melt Flow Index, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981 |
| AM Amin, MHI Ibrahim, MY Hashim, OMF Marwah, MH Othman, Muhammad Akmal Johar, CH Ng (2017) Green Density Optimization Of Stainless Steel Powder Via Metal Injection Molding By Taguchi Method, EDP SCIENCES , 1, ISBN:2261236X |
| A M Amin , M H I Ibrahim , R Asmawi , N Mustaffa , M Y Hashim (2017) Thermal Debinding And Sintering Of Water Atomised Ss316l Metal Injection Moulding Process, IOP publishing , 1, ISBN:1757-899X |
| M.N ROSLAN, A.E ISMAIL, M.Y HASHIM, M.H ZAINULABIDIN, S.N.A. KHALID (2014) Modelling Analysis On Mechanical Damage Of Kenaf Reinforced Composite Plates Under Oblique Impact Loadings, TRANS TECH PUBLICATIONS LTD. , 1324, ISBN:9783037859339 |
| Mohd Yussni Bin Hashim (2012) Plant Fiber Reinforced Polymer Matrix Composite: A Discussion On Composite Fabrication And Characterization Technique |
| Mohd Yussni Bin Hashim (2011) Construction Material Based On Aggregation Of Cotton Waste And Limestone Powder |
| Mohd Yussni Bin Hashim (2009) Effects Of Gating Design On The Mechanical Strength Of Thin Section Casting |
| Mohd Yussni Bin Hashim (2007) Effects Of Runner Diameter On The Mechanical Strength And Porosity Distribution Of Thin Section Castings , UKM |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2009 | Ketua Ahlijawatankuasa Pelaksana ( Pengangkutan Penceramah Jemputan ) sempena Program Simposium Antarabangsa anjuran Pusat Latihan Lanjutan Teknologi Tekstil, Fakulti Kejuruteraan Mekanikal & Pembuatan, 14~15 Disember 2009 | University |
Supervision
| Year | Description | Role |
|---|---|---|
| 2011 | Pengadil bagi Program "Pameran Inovasi dan Rekabentuk Kejuruteraan Mekanikal 2011" | Referee |
| 2010 | Supervisor fo Mr Mior Fitri Bin Mior Pendawa, "Mengkaji sifat-sifat mekanikal komposit poliester yang diperkuat dengan gentian kenaf untuk applikasi automotif ", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Supervisor fo Mr Muhammad Firdaus Bin Zainun, "Mengkaji sifat-sifat mekanikal komposit poliester yang diperkuat dengan serat nenas untuk aplikasi automotif ", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Supervisor fo Mr Akmal Bin Mohd Nor, "Determine the coconut coir mechanical properties for automotive application (inner door car panel) ", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2009 | Supervisor fo Ms Jasrulniza Binti Jamhari, "Kajian Terhadap Kulit Topi Keledar Motosikal Dengan Menggunakan Serat Daun Nenas", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2009 | Supervisor |
| 2009 | Supervisor fo Ms Nur Zuriati Bt Zainal Abidin, "Fabrikasi Penghasilan Kulit Topi Keledar Menggunakan Gentian Kenaf", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2009 | Supervisor |
| 2009 | Supervisor for Mr Shamzul Bin Che Mamat, "Mold fabrication for wax injection machine", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2009 | Supervisor |
| 2009 | Supervisor for Mr Lee Boon Hian, "Experimental study of the mechanical properties on cast aluminium alloy rods under different tilting angle", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2009 | Supervisor |
| 2008 | Supervisor for Mr Mohd Nur Syakirin Bin Mohd Said, "Menentukan kesan perbezaan rekabentuk ingate terhadap kekuatan mekanikal bahan aluminum aloi dalam process tuangan pasir", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2008 | Supervisor |
| 2008 | Supervisor for Mr Mohd Rizuan Bin Mohammed Shafiee, "Menentukan kesan perbezaan rekabentuk sistem laluan (runner) terhadap sifat mekanikal aluminum aloi dalam process tuangan pasir", Projek Sarjana Muda, Universiti Tun Hussein Onn Malaysia, 2008 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2012 | Chairperson for The International Conference on Civil and Environmental Engineering Sustainability (IConCEES 2011) with the theme "Civil and Environmental Engineering for Sustainability: A Better Natural and Built Environment" will be held on 3 to 5 April 2012. | International |
| 2012 | Naib Pengerusi untuk Persatuan Belia Bakti, Kampung Seri Menanti, Senggarang, Batu Pahat, Johor, 2012-2014 | District |
| 2009 | Setiausaha untuk Persatuan Belia Bakti, kampung Seri Menanti, Senggarang, Batu Pahat, Johor, 2009-2011 | District |