Staff Profile
| Full Name | PROF. MADYA Dr. ANIKA ZAFIAH BINTI MOHD RUS |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR) |
| Designation | DS54 - PROFESOR MADYA |
|
PENYELIDIK UTAMA PUSAT PEMBUATAN DAN BAHAN TERMAJU (AMMC) INSTITUT KEJURUTERAAN INTEGRASI |
Field of Expertise
| Field Category (KPT) | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
|---|---|
| Field (KPT) | Engineering Science and Technology |
| Field of Specialization (KPT) | Engineering Science and Technology |
Areas of Research Interest
| 1. | Synthesis of Renewable Polymer |
| 2. | Renewable Energy (DSSC and Conductive Polymer) |
| 3. | Acoustic and Vibration of polymer foam and composites |
| 4. | Photostability and Photodegradation of Polymer |
Innovation Field of Interest
| 1. | Polymer Synthesis from Renewable Resources |
| 2. | Monomer Converter Apparatus and Design |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2007 | DOKTOR FALSAFAH KIMIA | UNIVERSITY OF WARWICK |
| 2000 | SARJANA PENDIDIKAN | UNIVERSITI TEKNOLOGI MALAYSIA |
| 1998 | SARJANA MUDA SAINS KEJURUTERAAN MEKANIKAL | UNIVERSITI TEKNOLOGI MALAYSIA |
| 1994 | DIPLOMA SAINS GUNAAN | INSTITUT TEKNOLOGI MARA |
Professional Appointments
| DS54 - Profesor Madya |
Management Experience
| Year | Description |
|---|---|
| 2018 - 2022 | Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
| 2016 - 2017 | Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
| 2013 - 2015 | Anggota / Staf
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Pusat Pembuatan Dan Bahan Termaju (AMMC) |
| 2013 - 2015 | Penyelidik
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Pembuatan dan Bahan Termaju (AMMC) |
| 2010 - 2010 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR) |
| 2008 - 2010 | Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 01/01/2008 - 31/12/9999 | Board of Engineers Malaysia (BEM)
Lembaga Jurutera Malaysia | Jurutera Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2018 | Creative and Innovative | University |
| 2018 | Engineering Polymer and Ceramic | University |
| 2017 | Creativity and Innovation | University |
| 2017 | Engineering Polymer and Ceramic | University |
| 2015 | Engineer and Society (BDA40502) sem 2 20142015, Universiti Tun Hussein Onn Malaysia | University |
| 2015 | Engineer and Society (BDA40502), sem 1 sesi 20152016, Universsiti Tun Hussein Onn Malaysia | University |
| 2015 | Engineering Polymer (CDB 10303), sem 2 sesi 20142015, Universiti Tun Hussein Onn Malaysia | University |
| 2014 | Advanced Polymer (MDB10803), sem 1 sesi 20142015, University Tun Hussein Onn Malaysia | University |
| 2014 | Advanced Polymer (MDB10803) sem 2 20142015, Universiti Tun Hussein Onn Malaysia | University |
| 2013 | PEMILIHAN BAHAN KEJURUTERAAN ( BDA20402) Sesi 20122013 sem 1 | University |
| 2013 | POLIMER DAN SERAMIK (BDB4063) Sesi 20122013 sem 1 | University |
| 2013 | MAKMAL KEJURUTERAN II (BDA27001) Sesi 20122013 sem 1 | University |
| 2012 | KEJURUTERAAN POLIMER DAN SERAMIK (BDB40603) Sesi 20112012 Semester 1 | University |
| 2012 | Advanced Polymer (MDB10804) Sesi 20112012 Semester 1 | University |
| 2011 | KEJURUTERAAN POLIMER DAN SERAMIK (BDB40603) Sesi 20112012 Semester 1 | University |
| 2011 | ADV POLYMER [MDB 10804], SEM I SESI 2011/2012, UTHM | University |
| 2011 | MECHANICAL ENGINEERING DESIGN II, SEM I SESI 2011/2012, UTHM | University |
| 2010 | Mechanical Engineering Design II (BDA 4023), Sesi 20102011 Sem II, UTHM, 2011 | University |
| 2010 | Engineering Materials Selection [BDA 2042], Sesi 20092010 Semester II, Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Adv Polymer (MDB 10804), Sesi 20102011 Sem II, UTHM | University |
| 2009 | Materials Science [DDA 2053], Sesi20092010 Semester 1, Universiti tun Hussein Onn Malaysia, 2009 | University |
| 2009 | Engineering Skills (Elective Materials), Sesi 20092010 Semester I, Universiti Tun Hussein Onn Malaysia, 2009 | University |
| 2009 | Engineering Design [DDA 3063], Sesi 20082009 Semester II, Universiti Tun hussein Onn Malaysia, 2009 | University |
| 2009 | Pemilihan Bahan Kejuruteraan [BDA 2042], Sesi 20092010 Semester I, Universiti Tun Hussein Onn Malaysia, 2009 | University |
| 2008 | Makmal Kejuruteraan Bahan (BDA 2701), Sesi 20082009 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 | University |
| 2008 | Engineering Design (BDA 3083), Sesi20082009 Semseter 1, Universiti Tun Hussein Onn, Malaysia | University |
| 2008 | Pemilihan Bahan Kejuruteraan (BDA 2042), Sesi 20082009 Semester 1, Universiti Tun Hussein Onn Malaysia, 2008 | University |
| 2002 | Materials Technology Laboratory [BTT 1662], Sesi 20022003 Semester 1, Kolej Universiti Tun Hussein Onn, 2002 | University |
| 2002 | Materials Technology [BTT1663], Sesi 20022003 Smester 1, Kolej Universiti Tun Hussein Onn, 2002 | University |
| 2002 | Asas Pedagogi I [BTT 2053], Sesi 20022003 Semester 2, Kolej Universiti Tun Hussein Onn, 2002 | University |
| 2001 | Pedagogi Pendidikan Dalam PTV [MTT1204], Sesi 20012002 Semester 2, Kolej Universiti Tun Hussein Onn, 2001 | University |
| 2001 | Pengajaran Mikro Dalam PTV [MTT 1602], Sesi 20012002 Semester 2, Kolej Universiti Tun Hussein Onn Malaysia, 2001 | University |
Research Grants And Contracts
Publications
| Book |
|---|
| Anika Zafiah M. Rus (2006) Thermal And Photochemical Degradation Of Polyurethanes Based On Renewable Materials, BRITISH LIBRARY , 12, ISBN:62019232322 |
| Book Chapters |
| Nurulsaidatulsyida Sulong, Anika Zafiah Mohd Rus (2018) Processing And Compatibility Of High-Density Polyethylene Blended With Particle And Liquid Biopolymer On Ultraviolet Exposure, In Book: Regional Conference On Science, Technology And Social Sciences (Rcstss 2016) , Springer , 1, ISBN:9789811300745 |
| Anika Zafiah Mohd Rus (2017) Physical And Mechanical Properties Of Polymer Membranes From Renewable Resources, Handbook Of Composites From Renewable Materials, Wiley , 631, ISBN:9781119441632 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Azrin Hani Abd Rashid, Nurasyikin Misdan, Bachik Abu Bakar and Dalila Mohd Harun (2017) The Formulation And Synthesis Of Superhydrophobic Coating Based On Coconut Oil Reinforcing Natural Pigment For Self-Cleaning And Protective Nano-Coating, Advanced Technology Centre: Research And Innovation Series 1, UTHM , 107, ISBN:9789672110101 |
| A.Z.M. Rus (2016) Biopolymers For Superhydrophobic Photocatalysis Coatings, Biopolymers And Biotech Admixtures For Eco-Efficient Construction Materials, Elsevier Inc. , 421, ISBN:9780081002148 |
| General Publications |
| Anika Zafiah Binti Mohd Rus (2010) Amalan Kejuruteraan Mekanikal Iv (Bda 2811), UTHM |
| Anika Zafiah Binti Mohd Rus (2009) Amalan Kejuruteraan Mekanikal Iii (Bda 2801), UTHM |
| Journal |
| Anika Zafiah M. Rus (2018) An Acoustic Study Of Shorea Leprosula Wood Fiber Filled Polyurethane Composite Foam, MALAYSIAN JOURNAL OF ANALYTICAL SCIENCES, The Malaysian Analytical Sciences Society , 12, 1031, ISSN:13942506 |
| Hanani Abd Wahab, Anika Zafiah Mohd Rus, M. Taufiq Zaliran (2018) Design Of Experiment For In-Situ Synthesis Of Waste Vegetable Oils And Synthetic Based Polyurethane (Pu) Foam Composites, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, Science Publishing Corporation , 12, 413, ISSN:2227524X |
| Nur Munirah Abdullah,A. Z. M. Rus, M. F. L. Abdullah (2018) Enhancement Of Graphite Functionality In Renewable Polymer Composite Properties, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, Science Publishing Corporation , 7, 215, ISSN:2227524X |
| Abdul Talib Din, Norzawahir Mohd Hafiz, Anika Zafiah Mohd Rus (2018) Exploration To Find Green Building Materials From Recycled Solid Wastes, JOURNAL OF ADVANCED RESEARCH IN FLUID MECHANICS AND THERMAL SCIENCES, Penerbit Akademia Baru , 7, 35, ISSN:22897879 |
| S. Kormin and A. Z. M. Rus (2018) Fabrication And Characterization Of Polyurethane Foam Prepared From Liquefied Oil Palm Mesocarp Fibre With Renewable Monomer Made From Waste Cooking Oil, JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, JSASCM , 1, 722, ISSN:11129867 |
| Nik Normunira Mat Hassan, Zainon Sharmila Shamsudin, Anika Zafiah Mohd Rus, Nurulsaidatulsyida Sulong (2018) Investigation Of Renewable Polymer Composite From Waste Oil Endurance To Uv Irradiataion Exposure By Using Ftir And Uv-Vis, JOURNAL OF MECHANICAL ENGINEERING, Universiti Teknologi MARA , 4, 53, ISSN:18235514 |
| Shaharuddin Kormin, Anika Zafiah M. Rus (2018) Liquefaction Of Oil Palm Fruit Waste And Its Application For Development Of Polyurethane Foams, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, science publishing corporation , 8, 366, ISSN:2227524X |
| Shaharuddin Kormin, Anika Zafiah M. Rus (2018) Liquefaction Of Oil Palm Fruit Waste And Its Application For The Development Of Polyurethane Foams, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY, Science Publishing Corporation , 8, 366, ISSN:2227524X |
| Anika Zafiah M. Rus (2018) Mechanical Properties Of Wood Polymer Composites (Wpcs) After Prolonged Ultra-Violet (Uv) Irradiation Exposure, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 258, ISSN:2227524X |
| Noraini Marsi, Tan Ka Seng, Anika Zafiah Mohd Rus, Azrin Hani Abdul Rashid and Nor Mazlana Main (2018) Natural Pigment Based On Orange Fruit For Superhydrophobic Dyeing In Cotton Knitted Textile Application, INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), Engg Journals Publications , 10, 1, ISSN:23198613 |
| S. Kormin, A. Z. M. Rus and M. S. M. Azahari (2018) Solvolysis Liquefaction And Characterization Of Biopolyol Prepared From Liquefied Oil Palm Fruit Waste, JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, JFASCM , 2, 701, ISSN:11129867 |
| Nurulsaidatulsyida Sulong, Anika Zafiah Mohd Rus, Nik Normunira Mat Hassan, Noraini Marsi (2018) Spectroscopic Studies Of Oils And Its Synthesized Bio-Polymer, JOURNAL OF MECHANICAL ENGINEERING, Universiti Teknologi MARA , 2, 50, ISSN:18235514 |
| Anika Zafiah M. Rus (2018) Tensile Property Of Melt Mixing Co-Polypropylene With Waste Polymer At Different Composition Ratios, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 261, ISSN:2227524X |
| Anika Zafiah M. Rus (2018) Thermal Degradation Study Of Waste Polymer Matrix Polypropylene And Polyvinyl Chloride As Polymer Matrix Filled Rice Husk Decking Structure, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 266, ISSN:2227524X |
| Anika Zafiah M. Rus (2018) Waste Polymer Blended With Copolymer Polypropylene To Enhance Mechanical Properties Using Injection Moulding, INTERNATIONAL JOURNAL OF ENGINEERING & TECHNOLOGY, Science Publishing Corporation , 12, 1, ISSN:2227524X |
| M. Shafiq M. Azahari, Anika Zafiah M. Rus, Shaharuddin Kormin1 and M. Taufiq Zaliran (2017) Acoustic Properties Of Polymer Foam Composites Blended With Different Percentage Loadings Of Natural Fiber, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 8, 1, ISSN:17578981 |
| M.Saddam Kamarudin, Anika Zafiah M. Rus , Nur Munirah Abdullah, M. F. L Abdullah (2017) Dynamic Mechanical Properties Of Bio-Polymer Graphite Thin Films, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 9, 1, ISSN:17578981 |
| Anika Zafiah M. Rus, M. Shafiq M. Azahari, Shaharuddin Kormin, Leong Bong Soon, M. Taufiq Zaliran, and Ahraz Sadrina M.F.L (2017) Hybrid Waste Filler Filled Bio-Polymer Foam Composites For Sound Absorbent Materials, AIP CONFERENCE PROCEEDINGS , AIP Conference Proceedings , 9, 1, ISSN:0094243X |
| M Shafiq M Azahari, Anika Zafiah M. Rus, M Taufiq Zaliran, Shaharuddin Kormin (2017) Improving Sound Absorption Property Of Polyurethane Foams Doped With Natural Fiber, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 8, 1, ISSN:17578981 |
| A.S. Syah M. Zaini, Anika Zafiah M. Rus, Norherman Abdul Rahman, Farhana Hazwanee M. Jais, M. Zarif Fauzan, N. Afiqah Sufian (2017) Mechanical Properties Evaluation Of Extruded Wood Polymer Composites, AIP CONFERENCE PROCEEDINGS, American Institute of Physics Inc. , 9, 1, ISSN:0094243X |
| Shaharuddin Kormin, Anika Zafiah M. Rus (2017) Preparation And Characterization Of Biopolyol From Liquefied Oil Palm Fruit Waste: Part 1, MATERIALS SCIENCE FORUM, Trans Tech Publications Ltd , 1, 108, ISSN:02555476 |
| Shaharuddin Kormin, Anika Zafiah M. Rus (2017) Preparation And Characterization Of Biopolyol From Liquefied Oil Palm Fruit Waste: Part 2, MATERIALS SCIENCE FORUM, Trans Tech Publications Ltd , 1, 113, ISSN:02555476 |
| Shaharuddin Kormin, Anika Zafiah M. Rus, M Shafiq M Azahari (2017) Preparation Of Biopolyol By Solvolysis Liquefaction Of Oil Palm Mesocarp Fibre Using Polyhydric Alchohol, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 8, 1, ISSN:17578981 |
| Nur Munirah Abdullah, M Saddam Kamarudin, Anika Zafiah M Rus and M F L Abdullah (2017) Preparation Of Conductive Polymer Graphite (Pg) Composites, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 8, 1, ISSN:17578981 |
| Shaharuddin Kormin, Anika Zafiah M. Rus, M Shafiq M Azahari (2017) Preparation Of Polyurethane Foams Using Liquefied Oil Palm Mesocarp Fibre (Opmf) And Renewable Monomer From Waste Cooking Oil, AMERICAN INSTITUTE OF PHYSICS , American Institute of Physics Inc. , 9, 1, ISSN:0094243X |
| Shaharuddin Kormin, Anika Zafiah M. Rus, and M. Shafiq M. Azahari (2017) Preparation Of Polyurethane Foams Using Liquefied Oil Palm Mesocarp Fibre (Opmf) And Renewable Monomer From Waste Cooking Oil, AIP CONFERENCE PROCEEDINGS, American Institute of Physics , 10, 1, ISSN:0094243X |
| N Marsi, A Z M Rus, (2017) The Effects Of Biopolymers Composite Based Waste Cooking Oil And Titanium Dioxide Fillers As Superhydrophobic Coatings, IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING, IOP Publishing Ltd , 8, 1, ISSN:1757-899X |
| Shaharuddin Kormin, Anika Zafiah M. Rus, M. Shafiq M. Azahari (2017) Thermal Properties Of Biopolyol From Oil Palm Fruit Fibre (Opff) Using Solvolysis Liquefaction Technique, MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 8, 1, ISSN:17578981 |
| Noraini Marsi, Anika Zafiah Mohd Rus and Nurulsaidatulsyida Sulong (2017) Vibration Performances Of Lightweight Concrete Coated Biopolymer Based On Used Cooking Oil, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 7, 4236, ISSN:18196608 |
| Roslinda Hani Ramli , Chin Fhong Soon, Anika Zafiah Mohd Rus (2016) Characterisation Of Silver Nanoparticles Produced By Three Different Methods Based On Borohydride Reducing Agent, MATEC WEB OF CONFERENCE, EDP Sciences , 5, 1, ISSN:2261236X |
| Hassan, N.N.M., A.Z.M. Rus (2016) Thermal And Activation Energy Of Renewable Polymer After Uv Irradiation, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 1, 1510, ISSN:18196608 |
| Anika Zafiah M. Rus (2015) Elastic And Damping Characterization Of Biopolymer Composite , APPLIED MECHANIC AND MATERIALS, Trans Tech , 10, 187, ISSN:16627482 |
| Anika Zafiah M. Rus (2015) Graphite/ Bio-Based Epoxy Composites: Structural, Optical And Electrical Properties, APPLIED MECHANICS AND MATERIALS, Trans Tech , 7, 153, ISSN:16627482 |
| Anika Zafiah M. Rus (2015) Graphite/ Bio-Based Epoxy Composites: The Mechanical Properties Interface, APPLIED MECHANICS AND MATERIALS, Trans Tech , 7, 115, ISSN:16627482 |
| Anika Zafiah M. Rus (2015) Interconnected Interface Enhanced Electrical Properties Of Graphite In Bio-Based Epoxy From Insulating To Conductor Composites , INDIAN JOURNAL OF SCIENCE AND TECHNOLOGY, Indian Journal of Science and Technology , 8, 1, ISSN:09746846 |
| Anika Zafiah M. Rus (2015) Processibility Of Waste To Wealth Green Polymer With Polyethylene By Injection Moulding, JURNAL TEKNOLOGI, UTM , 10, 65, ISSN:21803722 |
| Anika Zafiah M. Rus (2015) Processing Of Sustainable Polymer With Thermoplastics By Injection Moulding, APPLIED MECHANICS AND MATERIALS , Trans Tech , 7, 57, ISSN:16627482 |
| Anika Zafiah M. Rus (2015) Processing Temperature Of Sustainable Polymer With Thermoplastics By Injection Molding (Part 2), APPLIED MECHANICS AND MATERIALS VOLS. (2015) PP 85-89 , Trans Tech , 7, 85, ISSN:16627482 |
| Anika Zafiah M. Rus (2015) Processing Temperature Of Sustainable Polymer With Thermoplastics By Injection Moulding (Part 1), APPLIED MECHANICS AND MATERIALS , Trans Tech , 7, 67, ISSN:16627482 |
| Anika Zafiah M. Rus (2015) Recycling Of Cooking Oil Waste Into Reactive Polyurethane For Blending With Thermoplastic Polyethylene, INTERNATIONAL JOURNAL OF POLYMER SCIENCE, Hindawi Publishing , 8, 11, ISSN:16879422 |
| Anika Zafiah M. Rus (2015) Sonochemistry Approach To Reducing Biodiesel Reaction Time From Jatropha Curcas Oil By Clamp On Tubular Reactor, ELSEVIER, Elsevier , 5, 480, ISSN:18766102 |
| Anika Zafiah M. Rus (2015) Synergistic Influence Of Graphite On Biopolymer Composites Properties, JURNAL TEKNOLOGI, UTM , 10, 11, ISSN:21803722 |
| Anika Zafiah M. Rus (2015) Thermal Degradation And Damping Characteristic Of Uv Irradiated Biopolymer, INTERNATIONAL JOURNAL OF POLYMER SCIENCE , Hindawi Publishing Corporation , 6, 11, ISSN:16879422 |
| Anika Zafiah M. Rus (2015) Thermal Gravimetric And Activation Energy Analysis Of Renewable Polymer Upon Ultraviolet (Uv) Irradiation, JURNAL TEKNOLOGI, UTM , 10, 57, ISSN:21803722 |
| Anika Zafiah M. Rus (2015) Utilization Of Oil Palm Trunk (Elaeis Guineensis) As Foam Composite For Sound Absorption, JURNAL TEKNOLOGI, UTM , 10, 75, ISSN:21803722 |
| Prosiding / Seminar |
| NORAINI MARSI, ANIKA ZAFIAH MOHD RUS AND NUR AQILLAH MOHD SHAMSUDDIN TAN (2017) The Effects Of Curcuma Longa On The Functionality Of Pigmentation For Thin Film Coating, IOP PUBLISHING , 1, ISBN:17578981 |
| Noraini Marsi, Anika Zafiah Mohd Rus, Mohd Razali Ibrahim, Syahir Arif Samsuddin, and Azrin Hani Abdul Rashid (2017) The Synthesis And Surface Properties Of Newly Eco-Resin Based Coconut Oil For Superhydrophobic Coating , KEY ENGINEERING MATERIALS , 59, ISBN:9783035711585 |
| Hani Ramli R., Soon C.F., Mohd Rus A.Z. (2016) Characterisation Of Silver Nanoparticles Produced By Three Different Methods Based On Borohydride Reducing Agent, MATEC , 01032 , ISBN:2261236X |
| Noraini Marsi, Burhanuddin Yeop Majlis, Faisal Mohd-Yasin, Azrul Azlan Hamzah, Anika Zafiah Mohd Rus (2016) Protek Psb As Biotechnologies Photosensitive Protection Mask On 3c-Sic-On-Si In Mems Sensor, IOPSCIENCE Publishing , 1 , ISBN:1757899x |
| Roslinda Hani Ramli, Chin Fhong Soon, Anika Zafiah Mohd Rus (2016) Synthesis Of Chitosan /Alginate/Silver Nanoparticles Hydrogel Scaffold, MATEC , 01031 , ISBN:2261236X |
| Ramli R.H., Fhong Soon C., Mohd Rus A.Z. (2016) Synthesis Of Chitosan/Alginate/Silver Nanoparticles Hydrogel Scaffold, MATEC , 01031 , ISBN:2261236X |
| Noraini Marsi, Burhanuddin Yeop Majlis, Faisal Mohd-Yasin, Azrul Azlan Hamzah, Anika Zafiah Mohd Rus (2016) Thermal Hysteresis Of Mems Packaged Capacitive Pressure Sensor (Cps) Based 3c-Sic, IOPSCIENCE , 1 , ISBN:1757899x |
| RUS A.Z.M. (2016) Waste Cooking Oil Of Renewable Polymer Foam Composite As Sound Absorbent Materials, TAIWANESSE , 1, ISBN:9781467398886 |
| A.Z.M. Rus (2016) Waste Cooking Oil Of Renewable Polymer Foam Composites As Sound Absorbent Materials, IEEE Xplore , - , ISBN:9781467398886 |
| Anika Zafiah Binti Mohd Rus (2012) Influence Of Bio Polymer Composites As Heat Absorption Coating, UTHM |
| Anika Zafiah Binti Mohd Rus (2012) Influence Of Sandwich Textile Bio-Polymer Foam Doped With Tio2 For Sound Absorption Study, USM |
| Anika Zafiah Binti Mohd Rus (2012) Influence Of Titanium Dioxide On Selfclean Bio Coating, UTHM |
| Anika Zafiah Binti Mohd Rus (2012) Mechanical Property Of Biopolymer Membrane And Its Composite, USM |
| Anika Zafiah Binti Mohd Rus (2012) Preliminary Fabrication Of Polymer Membranesfrom Renewable Resources, UTHM |
| Anika Zafiah Binti Mohd Rus (2012) The Novel Continues Biodiesel Process Using Ultrasonic Clamp On Tubular Reactor, UTHM |
| Anika Zafiah Binti Mohd Rus (2012) Thermal Stability Of Biopolymer, USM |
| Anika Zafiah Binti Mohd Rus (2010) Bio Polymer Thin Films Upon Bio And Thermal Induced Degradation |
| Anika Zafiah Binti Mohd Rus (2010) Effect Of Renewable Polymer Foam Porositys' Upon Single Metal Oxide Loading |
| Anika Zafiah Binti Mohd Rus (2010) Effect Of Tio2 On Dmta For Novelty Polyurethanes Polymer |
| Anika Zafiah Binti Mohd Rus (2010) Effect On Photocatalysis Metal Oxide For Solar Cells Development |
| Anika Zafiah Binti Mohd Rus (2010) Influence On Bio-Polymer Filled Metal Oxide Thin Films Composites Upon Bio-Degradation Treatment |
| Anika Zafiah Binti Mohd Rus (2010) Influence On Contact Angle Property Of Low Loading Superhydrophobic Metal Oxide Filler Filled Polymer Composite Surface Coating |
| Anika Zafiah Binti Mohd Rus (2010) Natural Dye Sensitized Photovoltaic For Energy Conversion Solar Cell |
| Anika Zafiah Binti Mohd Rus (2010) Natural Dye Sensitized Photovoltaic Metal Oxide For Energy Conversion Solar Cell |
| Anika Zafiah Binti Mohd Rus (2010) Role Of Photocatalysis For Bio-Epoxy Composite As Surface Coating |
| Anika Zafiah Binti Mohd Rus (2010) Study Of Waste Cooking Oil Bio-Polymer Composites (Top) As Surface Coating On Lightweight Roof Tile (Lrt) |
| Anika Zafiah Binti Mohd Rus (2010) Synthetic And Renewable Polymers |
| Anika Zafiah Binti Mohd Rus (2010) The Effect Of Natural Waste Materials As Sound Absorption Applications Based On Waste Oil Polymer |
| Anika Zafiah Binti Mohd Rus (2010) Thermal And Bio Induced Degradation For Bio-Polymer Thin Films From Renewable Resources |
| Anika Zafiah Binti Mohd Rus (2009) Material Properties Of Novelty Polyurethane Based On Vegetable Oils |
| Anika Zafiah Binti Mohd Rus (2007) Effect Of Tio2 On Materials Properties And Photochemical Stability Of Polyurethanes Based On Renewable Materials |
| Anika Zafiah Binti Mohd Rus (2006) Thermal And Photochemical Degradation Of Polyurethane Based On Renewable Materials |
| Anika Zafiah Binti Mohd Rus (2003) Vegetable Oils As Polymer Feedstocks: Chemical Modification, Materials Formulation And Economics |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2016 | Technical Committees ICMST 2016, Curtin University, Sarawak | International |
| 2016 | Consultative Panel for Fundamental Research Grant Scheme, phase 1/2016, UTHM | University |
| 2015 | Consultative Technical Commities of American Society for Research (ASR)/ICMMT 2015 | International |
| 2015 | Consultative Panel for Fundamental Research Grant Scheme, phase 1/2015, UTHM | University |
| 2015 | Program Committee Member / Reviewer of " International Conference of Advances in Materials Science and Engineering (MAT 2015), Dubai | International |
| 2014 | Invited Chair -ICMMT 2014 | International |
| 2014 | Reviewer for British Journal of Applied Science and Technology | International |
| 2014 | Reviewer for Journal of BioResources | International |
| 2014 | Consultative panel for Student assessment Centre (SAC) -JPA / MARA 2014 | National |
| 2014 | Consultative Panel for Fundamental Research Grant Scheme, phase 1/2014, UTHM | University |
| 2014 | Technical reviewer for International Conference on Materials Science and Energy Engineering (CMSEE 2014). | International |
| 2013 | Pelan Tindakan Modal Insan Inovatif Peringkat Tertiari (MOHE Implementation Plan for Development of Innovative Human Capital at Tertiary Level) through innovation of CATALYTIC CONVERTER [C-C]n | Government |
| 2013 | Consultative Panel for Exploratory Research Grant Scheme, phase 1/2013, UTHM | University |
| 2013 | Consultative Panel for Fundamental Research Grant Scheme, phase 1/2013, UTHM | University |
| 2013 | Reviewer- International Conference on Mechanical Engineering and Technology 2013 | International |
| 2013 | Reviewer of International Malaysia-Ireland Joint Symposium on Engineering, Science and Business 2013 | International |
| 2013 | Session Chair International Conference on Material and Manufacturing Technology, Seoul, Korea, 11-12 May 2013 | International |
| 2013 | Consultative Panel for Exploratory Research Grant Scheme (ERGS) 2013 for Malaysian Polytechnic Department | National |
| 2013 | Consultative Panel for International Invention, Innovation and Technology Exhibition 2013 (ITEX '13), UTHM | University |
| 2012 | An Apparatus for Producing Monomer, UI 2012700328, 2012 | Government |
| 2012 | A METHOD OF PRODUCING A BIODEGRADABLE POLYMER-FABRIC COMPOSITE, 2012 | University |
| 2012 | A METHOD OF PRODUCING A BIODEGRADABLE POLYMER MEMBRANE, 2012 | University |
| 2012 | Reviewer - Elsevier; Journal of King Saud University (Science) | International |
| 2012 | Reviewer - International Journal of Applied Science and Technology, IJAST | International |
| 2012 | Reviewer - International Journal of Integrated Engineering, IJIE | International |
| 2012 | Reviewer - ELSEVIER-Journal of Industrial Crop and Products | International |
| 2012 | Reviewer -Progress in Photovoltaics: Research and Application, Wiley | International |
| 2012 | Reviewer -International Conference on Advanced Material Engineering & Technology 2012 | International |
| 2012 | Reviewer-International Conference of Advanced Mechanical Engineering and Technology 2012 | International |
| 2011 | Consultancy for MyIPO "ANUGERAH HARTA INTELEK NEGARA (AHIN 2011)" entitle "A Biodegradable Polymer Thin Film and A Method of Producing Thereof" , PI 2010006334, 2010 | National |
| 2011 | Presenter of Seminar Hasil Penemuan Penyelidikan Terbaik FRGS Fasa 1/2008 | National |
| 2011 | Presenter - Small Medium Industry's Waste BioComposite for Water Proofing, Heat Insulation Coating and Sound Absorption Foam, DYNAMIC i-LEAP, KPT | National |
| 2011 | Consultancy for "ANUGERAH HARTA INTELEK NEGARA (AHIN 2011)"entitle A METHOD FOR PRODUCING A CROSS-LINKED POLYURETHANE SUBSTANCE FROM WASTE COOKING OIL, PI 2010006335, 2010. | National |
| 2011 | Consultancy for MyIPO "ANUGERAH HARTA INTELEK NEGARA (AHIN 2011), entitle " A PROCESS FOR FABRICATING POLYMER COATED LIGTHWEIGTH ROOF TILES", PI 2010006336, 2010. | National |
| 2011 | Reviewer -International Journal of Integrated Engineering, IJIE | International |
| 2011 | Reviewer - International Journal of Applied Science and Technology, IJAST | International |
| 2010 | "A PROCESS FOR FABRICATING POLYMER COATED LIGTHWEIGTH ROOF TILES", PI 2010006336, 2010. | National |
| 2010 | "A BIODEGRADABLE POLYMER THIN FILM AND A METHOD OF PRODUCING THEREOF", PI 2010006334, 2010 | National |
| 2010 | Forever Green Trading, Environmental Friendly Product | National |
| 2010 | "A METHOD FOR PRODUCING A CROSS-LINKED SUBSTANCE FROM WASTE COOKING OIL", PI 2010006335, 2010. | National |
| 2009 | Scientific Committee for International Journal of Integrated Engineering (Issues in Mechanical, Materials and Manufacturing Engineering), 2009 | University |
| 2009 | Consultative Panel for Nasional Fellowship scheme (NSF-MOSTI); category Biotechnology entitle Applications of TiO2 as TOP for self clean property in Lightweight Materials . RM120,000.00 | International |
| 2009 | Consultative for Nasional Fellowship scheme (NSF-MOSTI); category Biotechnology entitle Utilization of low hydroxyl content of Waste Oil Polymer foam for sound absorption application . RM120,000.00 | International |
| 2009 | University Assets Disposal Officer, Universiti Tun Hussein Onn Malaysia, 2009-2011 | University |
| 2008 | Judge for Research & Innovation Festival 2008, Student Innovation and Creativity Competition in Conjunction with R&I Fest , 14-16 Oct. 2008. | University |
| 2007 | Consultative member for DEFRA project code: NF0513(DEPARTMENT for ENVIRONMENT, FOOD and RURAL AFFAIRS) UK, 135,132.00 Pound Sterling | International |
| 2006 | Professional Member for Semi-Conductor Photocatalysis and Applied Photochemistry, UK | International |
| 2006 | Professional Member for Royal Society of Chemistry, Europe | International |
| 2005 | Professional Member for Polymer Degradation and Discussion Group (PDDG), UK | International |
Supervision
| Year | Description | Role |
|---|---|---|
| 2018 | Nur Syamimi Salim, PhD: Dynamic Mechanical Properties of Recycling waste oils into reactive polyurethane for blending with thermoplastic polyethylene, Sept 2018-till date | Supervisor |
| 2018 | Ahmad Tajuddin Bin Moen, BScHons, 2018, Flexural Strength of Co-Polypropylene and Homo-Polypropylene Polymer Filled with Waste PP Granulate Composite on Extended Ultra-Violet Irradiation Exposure | Supervisor |
| 2018 | Ts. HANANI BINTI ABD WAHAB, PhD, Optimization of acoustic properties at prolonged irradiation exposure of aromatic elastomer polymer composites with different variables. | Supervisor |
| 2017 | Mohammad Saddam Kamarudin, MEng, 2017, Dynamic Mechanical Properties of Graphite Renewable Polymer | Supervisor |
| 2017 | Mohammad Taufiq Mohammad Zaliran, MEng, 2017 | Supervisor |
| 2017 | NUR AFIQAH BTE SUFIAN, MEng, UTHM, Jun 2017- Title: Prolong Ultra Violet Exposure of Wood-Polymer-Composites (WPC) in Flexural Properties for Industrialized Building System (IBS) application | Supervisor |
| 2017 | Najah Anis Aqilah Mat Isa, MSc, 2017, Title: Thermogravimetric and Degradation Study of Polymer filled with Rice Husk | Supervisor |
| 2017 | Nur Aqilla Irna Binti Mohd Radzi, MSc, 2017, Title: Rheological characterization of Sustainable Polymer Composites with different volume fraction of wood fiber filler. | Supervisor |
| 2016 | Shahruddin Bin Kormin, PhD, Value-added Synthesis Approach Of Hydroxyl Monomer From Waste Biomass For Renewable Polymer Feedstock (Dec 2015) | Supervisor |
| 2016 | Muhammad Harith Ifwat B. Zulkarnain, B. Mech. Eng. Tensile of WPC, 2016 | Supervisor |
| 2016 | Ababuzeh B. Ramli, B. Mech. Eng. Mechanical Properties of Extended UV Irradiation of Biopolymer/PP doped TiO2, 2016 | Supervisor |
| 2016 | Mohammad Shafiq Mohammad Azahari, MEng, 2016 | Supervisor |
| 2016 | Nurzhatul Aziemah Binti Abdul Omar, B. Mech. Eng. | Supervisor |
| 2016 | Ahmad Shahrizan Syah, MEng, 2016 | Supervisor |
| 2016 | Norherman B. Abdul Rahman, B. Mech. Eng., Mechanical Properties Evaluation of Extruded WPC, 2016 | Supervisor |
| 2015 | Mohammad Firdaus Bin Zulkifli, B Mech Eng (Hons) | Supervisor |
| 2015 | Muhammad Amir Bin Abdullah, B. Mech Eng (Hons), Mechanical Properties of Renewable Polymer blended with HDPE of UV Irradiated Exposure | Supervisor |
| 2015 | Abdul Halim Bin Mohd Napiah, B. Mech Eng (Hons) | Supervisor |
| 2015 | Ahmad Shahrizan Syah Bin Mohd Zaini, B. Mech. Eng, Physical and Morphological Properties of WPC Upon UV Irradiation Exposure, 2015 | Supervisor |
| 2015 | Muhammad Faisal Bin Idaris@Idris, Mechanical Properties of HDPE Compounded with Biopolymer, B. (Hons) Mech. Eng, 2015 | Supervisor |
| 2015 | Mohd Fizri Bin Mustafa, B. Mech. Eng. Mechanical Property of Extended UV Irradiation of Biopolymer/Polypropylene Composite, 2015-2016 | Supervisor |
| 2015 | Abd Hakim Bin Abd Halil, B. Mech. Eng. 2015-2016 | Supervisor |
| 2015 | Iskandar Johari Bin Mahand@Mohamad, B. (Hons) Mech Eng. | Supervisor |
| 2014 | Mohd Osman Bin Dahlan, B. Mech Eng, "Insulation of Pilot Scale Reactor for Polymer Production", 2013-2014 | Supervisor |
| 2014 | Falcons Anak Yanez Rangod, B. Mech Eng. "Influence of Titanium Dioxide Doping on Bio and Synthetic Polymeric Foam for Acoustic Study, 2013-2014 | Supervisor |
| 2014 | Mohd Norazmil Bin Mustafa, B Mech Eng., "Design Structure Study of Biodiesel Ultrasonic Process Plant (BUPP), 2013-2014 | Supervisor |
| 2014 | Bainun Akmal Binti Mohd Atan, M. Mech Eng. "Influence of UV Irradiated on High Doping TiO2 of Polymer Foam for Acoustic Study', (Completed and Graduated in Oct 2014) | Supervisor |
| 2014 | Zainuddin Bin Mohd Hadzil, B Mech Eng, "Design of Portable Floor Fume Hood", 2013-2014 | Supervisor |
| 2014 | Mohd Saiful Anuar Bin Abd Razak, B.Mech Eng. "Influences of the Angle Towrds Fluid Distributions on Biodiesel Ultrasonic Process Plant (BUPP), 2013-2014 | Supervisor |
| 2014 | Azrin Shah Bin Adenan, "Ciri ciri Getaran bagi Bioploymer Fleksibel terhadap Sinaran UV yang dihasilkan melalui Fabrikasi Teknik Mampatan Panas", 2013-2014 | Supervisor |
| 2014 | Nurul Haiza Shafiee, B Chem Eng, The University of Auckland (UoA) Industrial Attachment at E1 -Sustainable Polymer Engineering from 1/12/2014 to 15/2/2015 | Supervisor |
| 2014 | Nur Faiz Bin Nordin, B Mech Eng, "UV-irradiated Rigid Biopolymer at prolonged Exposure for Vibration Study" , 2013-2014 | Supervisor |
| 2014 | Ahmad Helmi Bin Mat Yaakub, B Mech Eng, " Sound absorption of UV Irradiated Biopolymer from Renewable Resources', 2013-2014 | Supervisor |
| 2014 | Muhammad Safuan Bin Harman, "Kajian Getaran terhadap Biopolymer Fleksibel dibawah Sinaran UV", 2013-2014 | Supervisor |
| 2014 | Abdul Shukur Bin Abd Manan, " Kajian sifat getaran terhadap biopolymer tegar dibawah sinaran UV', 2013-2014 | Supervisor |
| 2014 | Nurul Syamimi Salim, M Mech Eng, Recycling of cooking oil waste into reactive polyurethane for blending with thermoplastic polyethylene | Supervisor |
| 2013 | Najibah bte Abd Latif, M Mech Eng, Vibration Damping Characteristic and Sound Absorption of Bio-Polymer from Waste Cooking Oil (COMPLETED AND GRADUATED August 2014) | Supervisor |
| 2013 | Yaanur Syaafa'at Binti Sharif, B Mech Eng., Investigation of an oil converterdesign to produce high yields of Bio-monomer, Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Emy Shaliza Binti Masli, B Mech Eng, Design Optimization of a Reactor | Supervisor |
| 2013 | Ermirul Bin Husin, B Mech Eng., Determination of palm vegetable oil for biodiesel production via ultrasonic method with different molar ratio and catalyst concentration, Universiti Tun Hussein Onn | Supervisor |
| 2013 | Siti Nur Izzati Binti Mohammed, B. Mech Eng, Thermal stability of UV irradiated Biopolymer Thin films and Biodegradable Plastic Bags, Universiti Tun Hussein Onn Malaysia, 2013 | Supervisor |
| 2013 | Tan Yong Liang, B. Mech Eng., Influence of UV Light and Humidity Exposure for Thermal Stability Study of Biopolymer Coating (BPC), UTHM | Supervisor |
| 2012 | Shafizah Saadon, M Mech Eng. "DEGRADATION OF NATURAL POLYMER FROM BIOMASS TO XYLOSE" | Supervisor |
| 2012 | Leong Boon Soon, M. Mech Eng, Novel Continuous Biodiesel Production using Clamp on Tubular Reactor (Completed and Graduated in Oct 2014) | Supervisor |
| 2012 | M. Khairul Zaimy Abd Ghani, M Mech Eng, Influence of Hot Compression Moulding of Biopolymer Filled Waste Granulate Biopolymer. | Supervisor |
| 2012 | Pang Yik Seen, B Mech Eng, Influence of Sandwich Textile Bio-Polymer Foam Doped with Metal Oxide for Sound Absorption Study | Supervisor |
| 2012 | Nurul Hamizah Bt Harun, B Mech Eng, Sustainable Composites for Heat Insulation Coating. | Supervisor |
| 2012 | Siti Rahmah Mohid, M Mech Eng,BIO COATING FOR NEUTRALIZING SUPEROXIDES OF AUTOMOTIVE GASSEOUS EMISSION TO IMPROVE ENVIRONMENT AIR QUALITY (Completed and Graduated in October 2015) | Supervisor |
| 2012 | Tan Yik Kai, B Mech Eng. "Sound absorbent study based on multilayer textile doped with TiO2 Biopolymer foam for automotive component" UTHM | Supervisor |
| 2012 | Ng Bak Kim, B Mech Eng. Influene of Textile Hybrid Biopolymer Foam for Sound Absorption Materials. | Supervisor |
| 2012 | Siti Syazwani Sarman, B Mech Eng. Influence of Water Content in Biopolymer for Acoustic Study. | Supervisor |
| 2012 | Seah Yen Zheng, B Mech Eng, Influence of Multilayer Textile Hybrid Bio-Polymer Foam for Sound Absorption Materials as an Automotive Component | Supervisor |
| 2011 | Muhamad Soqhimi B Mohamad Isa, BEng, Study on the Properties of Surface Coating Biopolymer for LCS,MCS and HCS plates upon Environmental Induced Degradation. | Supervisor |
| 2011 | Nur Izwani Binti Ahmad Rashid, BEng, Early Development of Microporous Biopolymer Membranes. | Supervisor |
| 2011 | Nor Hasmiza Bt Hassan, BEng, Thermal Property of Biopolymer Thin Films. | Supervisor |
| 2011 | Nur Suraya Anis Ahmad Bakhtiar, M Mech Eng, Preliminary Fabrication of Biodegradable Polymer Membranes from Renewable Resources (COMPLETED) | Supervisor |
| 2011 | Judge of Mechanical Engineering Design and Innovation Exhibition, 23rd December 2011, UTHM | Referee |
| 2011 | Nik Nurmunirah binti Mat Hassan, PhD Mech Eng. | Supervisor |
| 2011 | Nurul Saidatulsyida Sulong, PhD Mech Eng. | Supervisor |
| 2011 | Egi Agustian, Master in Mech Eng, Optimization for production of biodiesel from Waste Cooking Oil using Ultrasonic Tubular Reactor (COMPLETED) | Supervisor |
| 2011 | Achmad Praptijanto, M Mech Eng, Sonochemistry Approach for a new process of Biodiesel Production from Jatropha Curcas Oil (COMPLETED and GRADUATED) | Supervisor |
| 2011 | Rahimah Rahim, M Mech Eng, Biodegradable Polymer Membranes for Protective Medical Clothing. | Supervisor |
| 2010 | Mohd Faizullah Bin Abd arim, Mechanical Properties of Polymer based on Recycled Cooking Oil for Ligthweigth Concrete Application, BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Assessor for the Postgraduate Incentive Research Grant Seminar on 22 July 2010,Gallery Room, RMC, UTHM | Assessor |
| 2010 | Abdul Hadi Bin Osman, Design of Sound Absorbent Materials for Wall anel Application, BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Nornazatulsida Binti Nor Mohd kamal, Polymer Based on waste Cooking Oil, BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Rahimah bte Abd Rahim, Influence of Solar Cells Arrangement for Energy Conversion Based on Natural Dye Sensitize Materials, BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Noraini Marsi,Master in Mech Eng, Mechanical Properties of TOP for Ligthweigth Construction Composites,UTHM (COMPLETED and GRADUATED) | Supervisor |
| 2010 | Nurulsaidatulsyida binti Sulong, Master in Mech Eng, Sound Absorption of Low Hydroxyl Content Waste Oil Polymers,UTHM (COMPLETED and GRADUATED) | Supervisor |
| 2010 | Mohd Faiz B Ahad, Study on the properties of the surface coating for Low Carbon Steel (LCS), Medium Carbon Steel (MCS) and High Carbon Steel (HCS) based on Bio-polymer upon Thermal Induced Degradation, BEng, UTHM, 2010 | Supervisor |
| 2010 | Muhammad Sofwan Bin Che AlHadi, Study on the vibration characteristic on single waste filler filled bio-polymer composite, BEng, UTHM, 2010 | Supervisor |
| 2010 | Leong Boon Soon, Studies on the properties of hybrid waste filler filled bio-polymer composites for sound absorbent materials as an automotive component, BEng, UTHM, 2010 | Supervisor |
| 2010 | Fuziah bte Idris, Performance Study for series arrangement of solar cell upon noon and afternoon sunligth illumination, BEng, UTHM, 2010 | Supervisor |
| 2010 | Nurafizah Bte Zulkifli, Performance study for different dimension of single energy conversion solar cell, BEng, UTHM, 2010 | Supervisor |
| 2010 | Nursheila bte Rusmi, Design of Solar cells based on Local Natural Dye, BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2010 | Nik Alnur Auli, Master in Mech Eng. Bio, Thermal and Photodegradation of BioPolymer Thin Films, UTHM (COMPLETED and GRADUATED) | Supervisor |
| 2010 | Nur Munirah Abdullah, M Mech Eng, Natural Dye Sensitized Photovoltaic Metal Oxide for Energy Conversion Solar Cell, UTHM (COMPLETED) | Supervisor |
| 2010 | Mohd Hanif bin Mohd Zawawi, BEng, UTHM, 2010 | Supervisor |
| 2010 | Ahmad Izhan bin Abd Razak, Temperature induced degradation of Biopolymer as Surface Coating Materials, BEng, UTHM, 2010 | Supervisor |
| 2010 | Nik Mohamad Arif Zulkifli, Studies on Mechanical Properties for Waste Bio-Polymer Filler Filled Bio-Polymer Composites Under Hot Compression Moulding, BEng, UTHM, 2010 | Supervisor |
| 2010 | Assessor for Ahmad Bin Abas, Study on Blast Pressure Resistance of Foam Concrete, MEng, 2010 | Assessor |
| 2010 | Zul Azri bin Ibrahim, Investigation of Sound Absorbent Materials for Automotive Components, BEng, Universiti Tun Hussein Onn Malaysia, 2010 | Supervisor |
| 2009 | Nurbaizura Hj Jamel, Self-clean Property of Bio-Epoxy for Wood Finishing, BEng, UTHM, 2009 | Supervisor |
| 2009 | Hafizul Afifi Bin Rusmani, Surface Coating of Optical Fiber Based On Titanium Dioxide Epoxy Resin, BEng, UTHM, 2009 | Supervisor |
| 2009 | Wan Mohd Nurulhisam Wan Nawang, Satin White Two Pack Polyurethane (PU) for Wood Finishing, BEng, UTHM, 2009 | Supervisor |
| 2008 | Yazid Bin Yaacob, Banana Tree Fiber Stalk Composite Based On Epoxy For Air Cond Ducting, BEng,UTHM,2008 | Supervisor |
| 2008 | Muhammad Zuki Abd Kadir, Athetic Sport Track Composite From Natural Fiber (Coconut Husk), BEng,UTHM, 2008 | Supervisor |
| 2008 | Mohamad Rashid Bin Saari, Fabrication of Automotive Component Using RHA Composite, BEng, UTHM, 2008 | Supervisor |
| 2008 | Mohd Faizal Che Mohd Husin, Pineapple Leaf Reinforced Epoxy for Automaotive Component, BEng, UTHM, 2008 | Supervisor |
| 2008 | Referee for Research & Innovation Festival 2008, UTHM, Student Innovation and Creativity Competition in Conjunction with R&I Fest , 14-16 October 2008. | Referee |
| 2002 | Mardziah Binti Kamarudin, Master Coursework, KUiTTHO, 2002 | Supervisor |
| 2002 | Maria Mohammad, Master Coursework, KUiTTHO, 2002 | Supervisor |
| 2002 | Malisa Binti Othman, Master Coursework, KUiTTHO, 2002 | Supervisor |
| 2002 | Hafizah Rina Binti Abas, Master Coursework, KUiTTHO, 2002 | Supervisor |
| 2002 | Mariam Binti Abdullah, Master Coursework, KUiTTHO, 2002 | Supervisor |
| 2002 | Mazura Bt Stapah@Salleh, Master Coursework, KUiTTHO, 2002 | Supervisor |
| 2001 | Farhah Binti Jaffar, PSM, KUiTTHO,2001 | Supervisor |
| 2001 | Azlini Bt Mohd Salleh, PSM, KUiTTHO, 2001 | Supervisor |
| 2001 | Juliana Bt Mohd Ariffinn, PSM, KUiTTHO, 2001 | Supervisor |
| 2001 | Suhaila Binti Madros, PSM, KUiTTHO,2001 | Supervisor |
| 2001 | Nor Iffah Mohd Taib, PSM, ITTHO,UTM,2001 | Supervisor |
| 2001 | Jamaliah Binti Jaafar, PSM, KUiTTHO, 2001 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2018 | International Association of Engineers IAENG | International |
| 2015 | Program Committee Member / Reviewer of " International Conference of Advances in Materials Science and Engineering (MAT 2015), Dubai | International |
| 2013 | Special Award :Korea Invention News, International Conference and Exposition on Invention of Institutions of Higher Learning (PECIPTA 2013), Malaysia Ministry of Education, Kuala Lumpur Convention Centre, 7-9 November 2013. Product: Eco-SMART MONOMER CONVERTER (ECO-SMOC) | International |
| 2013 | Silver Medal Award, International Conference and Exposition on Invention of Institutions of Higher Learning (PECIPTA 2013), Malaysia Ministry of Education, Kuala Lumpur Convention Centre, 9 November 2013. Product: Eco-Degradable Renewable Polymer | International |
| 2013 | Silver Medal Award, International Conference and Exposition on Invention of Institutions of Higher Learning (PECIPTA 2013), Malaysia Ministry of Education, Kuala Lumpur Convention Centre, 7 - 9 November 2013. Product: Eco-Smart Monomer Converter (ECO-SMOC) | International |
| 2013 | Green Invention Order of Merit, World Inventor Award Festival (WIAF), Korea Invention News, Seoul, Korea, 14 th Dec. 2013 | International |
| 2013 | Experimental Aparatus Order of Merit, World Inventor Award Festival (WIAF), Korea Invention News, Seoul, Korea, 14 th Dec. 2013 | International |
| 2012 | Exhibitor and Presenter MTE 2012, awarded Bronze Medal for "Bio-degradable Membranes for Medical Bibs, BioReMedy Bibs" | International |
| 2012 | Exhibitor and Presenter MTE 2012 ,Awarded "WOMAN INVENTOR OF THE YEAR" | International |
| 2012 | Exhibitor and Presenter MTE 2012, Awarded GOLD MEDAL; Eco Smart Monomer Converter (Eco-SMOC) | International |
| 2012 | Session Chairperson, ICME 20-21 Nov 2012 | International |
| 2012 | Anika Zafiah - Recepient of the "2000 OUTSTANDING INTELLECTUALS OF THE 21st CENTURY FOR 2012", CAMBRIDGE, ENGLAND | International |
| 2012 | Presenter "Catalytic Converter C-Cn", ITEX 2012, awarded GOLD MEDAL | International |
| 2012 | Anika Zafiah-Receipient of Outstanding Supervisor Award 2012 (MASTER STUDENT), Faculty of Mechanical and Manufacturing Engineering, UTHM | University |
| 2012 | Anika Zafiah--Recipient of the "SIR ISAAC NEWTON SCIENTIFIC AWARD OF EXCELLENT", 2012 | International |
| 2012 | Presenter and exhibitor ; Seoul International Invention Fair 2012, Bronze Medal | International |
| 2011 | Exhibitor and Presenter for Eco Renewable Polymer at British Innovation and Invention Shows 2011, London, awarded GOLD MEDAL (consumer product) | International |
| 2011 | Exhibitor and Presenter for British Innovation and Invention 2011, London: Eco Degradable Renewable Polymer awarded DOUBLE GOLD (WORLD INVENTION AWARDS:Natural Earth) | International |
| 2011 | Exhibitor for International Invention, Innovation and Technology Exhibition (ITEX 2011), at Kuala Lumpur Convention Centre Malaysia, May 2011, Awarded Gold Medal for BioPOLY Heat Insulation Protection | International |
| 2011 | Anika Zafiah- Receipient of "Anugerah Perkhidmatan Cemerlang 2011", UTHM | University |
| 2011 | Exhibitor and Presenter in MiTE 2011 at Kuala Lumpur Convention Center (17-19 Feb 2011) for "Versatile Bio-Polymer From Waste Cooking Oil (BIO-WOP)" awarded Silver Medal | International |
| 2011 | Exhibitor and Presenter in MiTE 2011 at Kuala Lumpur Convention Center (17-19 Feb 2011) for "Versatile Bio-Polymer From Waste Cooking Oil (BIO-WOP)" awarded Foreign Special Award | International |
| 2011 | Exhibitor and Presenter in MiTE 2011 at Kuala Lumpur Convention Center (17-19 Feb 2011) for " Novelty Nanosurface Selfclean Ligthweigth Construction Composite (LCC) " awarded Silver Medal | International |
| 2011 | Presenter and Exhibitor MTE 2011 at Kuala Lumpur Convention Center (17-19 Feb 2011); "Versatile Bio-Polymer From Waste Cooking Oil (BIO-WOP)" awarded Special Award from International Iranian Innovators Elites (IIIEI) | International |
| 2010 | Committee of National Conference on Advanced Manufacturing and Materials Engineering (NAMME2010), Universiti Tun Hussein Onn Malaysia, 2010 | University |
| 2010 | Exhibitor and Presenter for Malaysia Technology Expo, Invention & Innovation Awards (MTE 2010), at Putra World Trade Center, 4 - 6 February 2010, Silver Medalist for Bio-WOP | International |
| 2010 | Coordinator For special Taskforce for "International Day: World Day to Combat Desertification and Drought" | University |
| 2010 | Exhibitor and Presenter in Malaysia Technology Expo, Invention & Innovation Awards (MTE 2010), at Putra World Trade Center, 4 - 6 February 2010, Silver Medalist for TOP-LRT | International |
| 2010 | Exhibitor for Research and Innovation Festival 2010 (RnI fest 2010), at UTHM, 3 - 5 August 2010; Silver Medalist for Energy Conversion Cell from Renewable Materials | National |
| 2010 | Coordinator of FKMP's Colloquium, Seminars and Short Courses 2010: -Colloquium 1/2010, Colloquium 2/2010, Colloquium 3/2010, Colloquium 4/2010 | University |
| 2010 | Exhibitor for Research and Innovation Festival 2010 (RnI fest 2010), at UTHM, 3 - 5 August 2010; Gold Medalist for Novelty Degradable Polymer Thin Films | National |
| 2010 | Exhibitor for Malaysia Technology Expo, Invention & Innovation Awards (MTE 2010), at Putra World Trade Center, 4-6 February 2010; Bronze Medalist for Bio-Bag | International |
| 2010 | Exhibitor and Presenter for International Invention, Innovation and Technology Exhibition (ITEX 2010), at Kuala Lumpur Convention Centre Malaysia, 14 - 16 May 2010, Awarded Gold Medal for Planting Mulching Thin films | International |
| 2009 | Scientific Committee for International Journal of Integrated Engineering; Mechanical, Materials and Manufacturing Engineering | International |
| 2009 | Ketua Panel Pentaksir Soalan Kertas 1 Mata Pelajaran Pengajian Kejuruteraan Mekanikal (TM027/1), Bahagian Matrikulasi, Kementerian Pelajaran Malaysia | National |
| 2009 | Coordinator for FKMP?s Colloquium, Seminars and Short Courses for 2009:-Colloquium 1/2009, Colloquium 2/2009, Short course 1/2009, Seminar 1/2009 | University |
| 2009 | Coordinator and Editor of Faculty?s Bulletin; MEKANIKA 2009, FKMP | University |
| 2009 | Exhibitor for International Exposition of Research and Invention of Institutions of Higher Learning (PECIPTA 2009), at Kuala Lumpur Convention Centre, 8 10 October 2009; Bronze Medalist for Bio waste oil polymer | International |
| 2009 | Exhibitor for International Exposition of Research and Invention of Institutions of Higher Learning (PECIPTA 2009), at Kuala Lumpur Convention Centre, 8 10 October 2009: Bronze Medalist for Bio-WOP Concrete | International |
| 2008 | Coordinator of FKMP?s Colloquium, Seminars and Short Courses for 2008: -Colloquium 1/2008, Colloquium 2/2008, Colloquium 3/2008, Colloquium 4/2008 | University |
| 2008 | Coordinator and Editor of First Edition for Faculty?s Bulletin; MEKANIKA 2008 | University |