Staff Profile

Full NameTs. Dr. ZAKIAH BINTI KAMDI
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR)
Email
Designation DS52 - PENSYARAH KANAN

Field of Expertise

Field Category (KPT) MATERIAL SCIENCES
Field (KPT) Advanced Materials
Field of Specialization (KPT) Other Advanced Materials n.e.c.

Academic Qualification

YearQualificationInstitution
2012 DOKTOR FALSAFAH MATERIALS ENGINEERING AND MATERIALS DESIGN THE UNIVERSITY OF NOTTINGHAM
2003 SARJANA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA
2002 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA

Professional Appointments

DS52 - Pensyarah Kanan

Professional Societies

YearDescriptionRoleLevel
21/05/2018 - 31/12/9999 International Association of Engineers (IAENG)
Ahli Antarabangsa
04/03/2019 - 31/12/9999 Malaysia Board of Technologists (MBOT)
Teknologis Berijazah Kebangsaan
01/01/2008 - 31/12/9999 Malaysian Nuclear Society (MNS)
Ahli Kebangsaan
02/05/2019 - 01/05/2020 Malaysia Board of Technologists (MBOT)
Teknologis Profesional Kebangsaan
30/09/2005 - 31/12/9999 Board of Engineers Malaysia (BEM)
Lembaga Jurutera Malaysia
Jurutera Siswazah Kebangsaan
24/05/2017 - 23/05/2018 Malaysian Tribology Society (MYTRIBOS)
Ahli Kebangsaan

Teaching Experience

YearDescriptionLevel
2018 Materials Science [BDA 10803], Sesi 20182019 Semester 1, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Engineering Materials Selection [BDA20402], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2018 Corrosion and Prevention [BDB40403], Sesi 20172018 Semester 2, Universiti Tun Hussein Onn Malaysia, 2018 University
2017 Corrosion and Prevention [BDB40403], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Composite[BDB40703], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Materials Characterisation and Testing [MDB10403], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2017 Materials Characterisation and Testing [CDB10103], Sesi 20172018 Semester 1, Universiti Tun Hussein Onn Malaysia, 2017 University
2016 Materials Science [BDA10803], Sesi 20152016 Semester 2, Universiti Tun Hussein Onn Malaysia, 2016 University
2016 Engineering Materials Selection [BDA20402], Sesi 20162017 Semester 1, Universiti Tun Hussein Onn Malaysia, 2016 University
2015 Corrosion and Prevention [BDB40403], Sesi 2014-2015 Semester 2, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Applied Metallurgy [BDB40503], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2015 Corrosion and Prevention [BDB40403], Sesi 20152016 Semester 1, Universiti Tun Hussein Onn Malaysia, 2015 University
2014 Sains Bahan [BDA10803], Sesi 2014-2015 Semester 1, Universiti Tun Hussein Onn Malaysia, 2014 University
2013 Materials Science [BDA 10803], Sesi 20122013 Semester 2, Universiti Tun Hussein Onn Malaysia, 2013 University
2012 Advanved Thermodynamics of Materials [MDB 10203], Sesi 20122013 Semester 1, Universiti Tun Hussein Onn Malaysia, 2012 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
H129 Evaluation of wear and corrosion mechanism of nickel based electrodeposited coating with different carbide type, carbide concentration and current density Ketua 30/06/2020
T001 Tajuk Program:Antifouling Enchancement for membrance water separation performance via iosynthesis additive and second order Back Propagation Neural Network (BPNN) optimization technique Tajuk Projek : Antifouling study of the ZnO bio-synthesis polymer mixed matric membrane using various natural organic matter (NOM) medium Ahli 30/11/2019
1483 Using Tribologi Technology And Know-How At Titanium Dioxide Digestion Process To Improve Continuous Digester Blade Wear And Degradation Rates Thereby Enhancing Productivity Ahli 28/02/2017
1460 New approach to improvement corrosion resistance on X65 pipeline steel and corrosion resistance alloys (CRAs) by using green inhibitor and coating. Ahli 31/12/2016
E026 The Effect Of Aqueous Enviroment In Abrasion-Corrosion Of Coating And Thin Film Ketua 31/05/2016
U289 Effect of Corrosion and Wear of Tungsten Carbide Coating Ketua 31/01/2016
E028 An Investigation Of Stainless Steel (SS316L) And Cobalt Chromium (Cocr) Foam For Orthopaedics Application By Using Powder Metallurgy Routes Ahli 31/08/2015
0361 Improvement of High Temperature Corrosion of Ferritic Steel as Interconnector Materials for Fuel Cell with Ion Implantation Technique Ahli 31/05/2010
0581 Effect of rotrogression and reaging to the properties of aluminium 2024 Ketua 14/12/2009
0155 Acoustic and Comfort Analysis on Coconut Fiber Product Ahli 07/08/2007
0156 The Corrosion Behavior Of 6061 And 6063 Aluminum Alloy Using Hard Anodizing Ketua 31/12/2005

Publications

General Publications
Zakiah Binti Kamdi
(2008) Engineering Materials Science (Bda 1032/Bda 1602), UTHM
Journal
M. Luqman Harith Abu Mansor, Rosniza Hussin, Zakiah Kamdi, Ainun Rahmahwati Ainuddin, Siti Aida Ibrahim, Mohamed Nasrul Mohamed Hatta, Muhamad Zaini Yunos
(2018) Deposition And Characterization Of Cobalt Doped Titanium Dioxide Thin Films Using Sol-Gel Method, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 12, 61, ISSN:26007924
Siti Aida Ibrahim, Abdul Hadi Zainal Alam, Rosniza Hussin, Zakiah Kamdi, Mohamed Nasrul Mohamed Hatta, Ainun Rahmahwati Ainuddin and Muhamad Zaini Yunos
(2018) Effect Of Calcination Temperature On (N, Fe) Doped Tio2 Nanoparticles, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 6, 44, ISSN:22298460
Zakiah Kamdi, Nur Azam Badarulzaman, Muhammad Adeeb Reezan Sukkeri, Muhammad Syafiq Hassan, Mohamed Nasrul Mohamed Hatta, Ainun Rahmahwati Ainuddin
(2018) Evaluation Of Corrosion And Wear Behaviour Of Nickel Tungsten Carbide Electro-Deposited With Different Tungsten Carbide Concentration And Current Density, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 8, 38, ISSN:22298460
Mohd Affifudin Abdul Patar, Z. Kamdi
(2018) Influence Of Deposition Parameter To Wear Behaviour Of Tungsten Carbide-Nickel (Wc-Ni) High Velocity Oxyfuel (Hvof) Coating, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 12, 64, ISSN:26007924
Noor Aqilah Ahmad, Zakiah Kamdi, Abdul Latif Mohd Tobi
(2018) Wear And Corrosion Behavior Of Tungsten Carbide Based Coating On Carbon Steel, INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, UTHM , 9, 119, ISSN:26007916
M. Nagentrau, A. L. Mohd Tobi, Z. Kamdi, M. I. Ismail, M. Sambu
(2017) A Study On Wear Failure Analysis Of Tungsten Carbide Hardfacing On Carbon Steel Blade In A Digester Tank, JOURNAL OF FAILURE ANALYSIS AND PREVENTION, Springer , 8, 1, ISSN:1547-7029
A. L. Mohd Tobi, Z. Kamdi, M. I. Ismail, M. Nagentrau, L. N. H. Roslan,Z. Mohamad, A. S. Omar, N. Abdul Latif
(2017) Abrasive Wear Failure Analysis Of Tungsten Carbide Hard Facing On Carbon Steel Blade, MATERIALS SCIENCE AND ENGINEERING, IOP SCIENCE , 1, 21, ISSN:1757899X
N.A.Ahmad, Z. Kamdi, Z. Mohamad, A. S. Omar, N. Abdul Latif, A. L.Mohd Tobi
(2017) Characterization Of Wc-10ni Hvof Coating For Carbon Steel Blade, MATERIALS SCIENCE AND ENGINEERING, IOP SCIENCE , 1, 11, ISSN:1757899X
M. Nagentrau, A.L.Mohd Tobi, Z. Kamdi, M. I. Ismail and M. Sambu
(2017) Microstructure Analysis Of Tungsten Carbide Hardfacing On Carbon Steel Blade, IOP CONF. SERIES: MATERIALS SCIENCE AND ENGINEERING, Institute of Physics Publishing , 6, 1, ISSN:1757-899X
M N M Hatta, M S Hashim, R Hussin, S Aida, Z Kamdi, AR Ainuddin and MZ Yunos
(2017) Synthesis Of Carbon Nanostructures From High Density Polyethylene (Hdpe) And Polyethylene Terephthalate (Pet) Waste By Chemical Vapour Deposition , JOURNAL OF PHYSICS: CONFERENCE SERIES , IOP Publishing Ltd , 10, 1, ISSN:17426588
Ainun Rahmahwati Ainuddin
(2017) The Effect Of Water Bath Temperature During Electrochemical Deposition Of Zinc Oxide, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 12, 84, ISSN:22298460
Nur Amira Mohd Rabani, Zakiah Kamdi
(2017) Two-Body Dry Abrasive Wear Performance Of High Velocity Oxygen Fuel Spray Process And Electrodeposited Cermet Coatings, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 3, 131, ISSN:16629752
Zakiah Kamdi
(2016) Characterisation Of Wc-17co And Wc-9ni Hvof Sprayed Cermet Coating, MATERIALS SCIENCE FORUM, Trans Tech Publication Ltd , 1, 331, ISSN:16629752
Nur Amira MOHD RABANI, Zakiah KAMDI
(2016) Characterisation Of Wc-17co And Wc-9ni Hvof Sprayed Cermet Coatings, MATERIALS SCIENCE FORUM, Trans Tech Publications, Switzerland , 1, 331, ISSN:16629752
Nur Amira Mohd Rabani and Z. Kamdi
(2016) Corrosion Behaviour Of High Velocity Oxygen Fuel Spray Process And Electrodeposited Coating In Aqueous Environment, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 6, 7638, ISSN:1819-6608
Z. Kamdi, K.T. Voisey
(2016) Corrosion Mechanism Of Tungsten Carbide-Based Coatings In Different Aqueous Media, KEY ENGINEERING MATERIALS, Trans Tech Publications, Switzerland , 5, 167, ISSN:1662-9795
Z. Kamdi
(2015) Characterisation Of Wc-Co Coatings Corrosion Product By Raman Spectroscopy, ADVANCE MATERIALS RESEARCH, Trans Tech Publication Ltd , 2, 379, ISSN:16628985
Suzi Salwah Jikan, Sharifah Sakinah Abdullah, Nur Azam Badarulzaman, Zakiah Kamdi and Azzura Ismail
(2015) Corrosion Behaviour And Morphological Analysis Of Ni/Cu Nanolayer Coating In Salt Solution, APPLIED MATHEMATICS AND COMPUTATIONAL INTELLIGENCE (AMCI) , Universiti Malaysia Perlis (UniMAP) , 1, 355, ISSN:22891323
Z. Kamdi
(2015) Corrosion Behaviour Of Wc-Co Cermet Coating, MATERIALS SCIENCE FORUM, Trans Tech Publication Limited , 6, 87, ISSN:16629752
Media Digital
Ainun Rahmahwati Ainuddin dan Zakiah Kamdi
(2018) Materials Science, UTHM , ISBN:-
Prosiding / Seminar
Ainun Rahmahwati Ainuddin, Kuganesawaran a/l Kalidasan, Zakiah Kamdi, Siti Aida Ibrahim, Rosniza Hussin and Thuwaibah Mohd Junaid
(2019) The Effect Of Zinc Oxide Nanostructure On The Antibacterial Activity, AMERICAN INSTITUTE OF PHYSICS INC. , 020094-1, ISBN:9780735417960
A R Ainuddin, M Z Yup, Z Kamdi, R Hussin and S A Ibrahim,
(2018) Effects Of Ag Dopant And Ultraviolet Irradiation On Structural Properties Of Zinc Oxide Nanostructures, AMERICAN INSTITUTE OF PHYSICS , 020071 -1, ISBN:9780735417717
Mohd Tobi A L, Nagentrau M, Kamdi Z, Ismail M I , Omar A S
(2018) Effects Of Weldment Layer On The Tungsten Carbide Hardfacing Microstructure, IOP PUBLISHING , 1, ISBN:17578981
A. L. Mohd Tobi, Z. Kamdi, M. I. Ismail, M. Nagentrau, L. N. H. Roslan, Z. Mohamad, A. S. Omar, N. Abdul Latif
(2017) Abrasive Wear Failure Analysis Of Tungsten Carbide Hard Facing On Carbon Steel Blade , IOP PUBLISHING LTD , 1, ISBN:17578981
Z. KAMDI, M.N.M. APANDI AND M.D. IBRAHIM
(2017) Wear And Corrosion Behaviour Of Tungsten Carbide Based Coatings With Different Metallic Binder , AMERICAN INSTITUTE OF PHYSICS , 120005-1, ISBN:9780735415898
F. M. Noor, M. I. M. Zain, K. R. Jamaludin, R. Hussin, Z. Kamdi, A. Ismail, S. Ahmad, H. Taib
(2013) Potassium Bromide As Space Holder For Titanium Foam Preparation, Trans Tech Publications, Switzerland , 922 , ISBN:978-303785933-9
Zakiah Binti Kamdi
(2010) Micro-Scale Abrasion Behaviour Of Conventional And Large-Particle Cermet Coatings For Hard Chrome Replacement, Lulea University of Technology
Zakiah Binti Kamdi
(2008) Effect Of Anodizing Time To The Properties Of Aa6061 And Aa6063
Zakiah Binti Kamdi
(2008) Effect Of Retrogression And Reaging To The Properties Of Aa 2024
Zakiah Binti Kamdi
(2007) Comparative Of Hardness And Corrosion Properties Between Aa6061 And Aa6063 After Anodizing Process

Supervision

YearDescriptionRole
2019 Supervisor for Alex Shee Yin Ning, BEng., Tungsten Carbide Coating as Potential Wear and Corrosion Protection for Metals, Universiti Tun Hussein Onn Malaysia, 2019 Supervisor
2018 Supervisor for Muhammad Syahmi bin Mustafa Kamal, BEng., Comparison of the Hardness and Flexural Strength of WC-Ni High Velocity Oxyfuel (HVOF) Coating with Different Substrate, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2018 Supervisor for Mohd Affifudin bin Abdul Patar, BEng., Influence of Deposition Parameter to Wear Behaviour of Tungsten Carbide-Nickel (WC-Ni) High Velocity Oxyfuel (HVOF) Coating, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2018 Supervisor for Ahmad Zaki bin Pengeran Najib, BEng., Corrosion Behaviour of WC-Ni Thermal Spray Coating with Influence of Spray Parameters, Universiti Tun Hussein Onn Malaysia, 2018 Supervisor
2017 Supervisor for Muhammad Syafiq bin Hassan, BEng, Ciri-ciri dan Sifat Kakisan Pengelektroenapan Nikel Berasaskan Tunsten Karbida (Ni-WC) Menggunakan Kepekatan Tungsten Karbida (WC) dan Ketumpatan Arus yang Berbeza, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2017 Supervisor for Muhamad Adeeb Reezan bin Sukkeri, BEng, Evaluation of Wear Behaviour of Nickel Tungsten Carbide (Ni-WC) Electrodeposited with Different Tungsten Carbide (WC) Cocentration and Current Density, Universiti Tun Hussein Onn Malaysia, 2017 Supervisor
2016 Supervisor for Mohamad Aminudin bin Mohd Zainal, BEng, Kajian Rintangan Haus Keluli Karbon Disalut Tungsten Karbida Menggunakan Kaedah Salutan yang Berbeza, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Muhammad Nursyaraffi bin Mohd Nazri, BEng, Characterisation of Nickel Electroplating for Corrosion Application, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Muhammad Iqmal bin Nasir, BEng, Wear Behaviour of Nickel Plated Carbon Steel with Different Type of Carbide, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2016 Supervisor for Alfonsus Anak Sylvester Sabuk, BEng, Corrosion Behaviour of Tungsten Carbide Based Hardfacing in Acidic Environment, Universiti Tun Hussein Onn Malaysia, 2016 Supervisor
2015 Supervisor for Mohd Fardee bin Paimin, BEng, Kesan Salutan Ke atas Sifat Lelasan dan Kakisan, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Mohd Edni Amir bin Ahmad, BEng, Kakisan Pada Bahan Salutan Dalam Persekitaran yang Berbeza, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Muhammad Noorakmal b Mohd Apandi, BEng, Kajian Sifat Haus Terhadap Salutan Tungsten Karbida-Kobalt (WC-Co) dan Tunsten Karbida-Nikel (WC-Ni), Univeristi Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Mohd Dzulkifly bin Ibrahim, BEng, Membandingkan Sifat Kakisan pada Keluli Karbon Rendah Menggunakan Salutan yang berbeza, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Macmarcel Joseph Motunggi, BEng, Kesan Salutan Nikel dan Ni-SiC Terhadap Sifat Mekanikal Keluli Karbon Rendah AISI 1018, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2015 Supervisor for Ahmad Fadli bin Hadi, BEng, Kajian Mengenai Kesan Kelakuan Kehausan Terhadap Parameter Pensinteran Pada Bahan Tungsten Karbida Terekat, Universiti Tun Hussein Onn Malaysia, 2015 Supervisor
2014 Supervisor for Herlin binti Ahmad, B.Eng., Effect of Cobalt Content in Tungsten Carbide (WC) as a Corrosion and Wear Protection of Carbon Steel, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Farid bin Ahmad, BEng, Perlakuan Kakisan Pada Lapisan Perlindungan yang Berbeza, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Muhammad Murshidi bin Jamaludin, BEng, Kesan Persekitaran Kakisan Pada Jenis Lapisan Seramik-Logam yang Berlainan, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Nur Afiqah Amira binti Ismail, B.Eng, Kajian Keupayaan Salutan Melindungi Aloi Aluminium 6061 dan Aloi Aluminium 6063 Diuji dengan Ujian Elektrokimia, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mardhati bte Mahadi, B. Eng, Analisis Kesan Kepekatan Sodium Klorida (NaCl) Terhadap Sifat Kakisan Kimpalan Keluli Tahan Karat Jenis 316L Menggunakan Parameter Kimpalan Berbeza, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Mohd Hisyam bin Rahim, B.Eng, Mengkaji Sifat Haus Pad Brek dengan Menggunakan Bahan Pelellas yang Berbeza, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2014 Supervisor for Khairul Anwar bin Ahmad Kamal, BEng, Kajian Terhadap Kelakuan Haus Bagi Keluli Karbon Rendah dengan Salutan Seramik Logam, Universiti Tun Hussein Onn Malaysia, 2014 Supervisor
2013 Supervisor for Phang Chin Yee, B. Eng, Comparison of Hardness, Corrosion and Wear Resistance of Heat Treated and Cermet Coated AISI 1018 Steel, Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Gaviani Lawai Harriss, B. Eng, Effect of Quenching, Stress Relieving and Electroplating on Mechanical and Corrosion rate of Carbon Steel (AISI 1018, 1045, 1080), Universiti Tun Hussein Onn Malaysia, 2013 Supervisor
2013 Supervisor for Soo Heng Chuan, B. Eng, "Investigating the Corrosion, Hardness, and Wear of AISI 316L Stainless Steel After Heat Treatment",Universiti Tun Hussein Onn Malaysia, 2013 Supervisor

« Back