Staff Profile

Full NamePROF. MADYA Dr. ZAWATI BINTI HARUN
FacultyFAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN
DepartmentJABATAN KEJURUTERAAN BAHAN DAN REKABENTUK (JKBR)
Email
Designation DS54 - PROFESOR MADYA
  PENYELIDIK UTAMA
PUSAT PEMBUATAN DAN BAHAN TERMAJU (AMMC)
INSTITUT KEJURUTERAAN INTEGRASI
  KETUA PUSAT
PUSAT PEMBUATAN DAN BAHAN TERMAJU (AMMC)
INSTITUT KEJURUTERAAN INTEGRASI

Field of Expertise

Field Category (KPT) APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES
Field (KPT) Engineering Science and Technology
Field of Specialization (KPT) Engineering Science and Technology

Areas of Research Interest

1. polymer and ceramic membrane
2. drying and sintering of ceramic
3. simulation and modelling of porous material
4. composite
5. ceramic

Innovation Field of Interest

1. Synthesis of ceramic particle
2. heavy metal absorption
3. membrane technology

Academic Qualification

YearQualificationInstitution
2008 DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL UNIVERSITY OF WALES, SWANSEA
1998 SARJANA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA
1997 SARJANA MUDA KEJURUTERAAN BAHAN UNIVERSITI SAINS MALAYSIA

Professional Appointments

DS54 - Profesor Madya

Management Experience

DateDescription
01/01/2018 - 31/12/2022 Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/03/2018 - 29/02/2020 Ketua Pusat
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/03/2016 - 28/02/2018 Ketua Pusat
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/01/2016 - 31/12/2017 Penyelidik Utama
Institut Kejuruteraan Integrasi, Pusat Pembuatan dan Bahan Termaju (AMMC)
01/01/2013 - 31/12/2015 Penyelidik
Pejabat Pengurusan Penyelidikan, Perundingan, Pengkomersilan & Inovasi, Pusat Pembuatan Dan Bahan Termaju (AMMC)
01/01/2012 - 31/12/2013 Ketua Makmal
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)
01/02/2010 - 01/01/2012 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)
01/09/2009 - 31/12/2010 Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan
15/02/2008 - 14/02/2010 Ketua Panel
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Bahagian Pentadbiran dan Kewangan
15/08/2008 - 31/08/2009 Ketua Jabatan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Jabatan Kejuruteraan Bahan dan Rekabentuk (JKBR)

Professional Societies

YearDescriptionRoleLevel
01/01/2016 - 31/12/9999 International Association Of Computer Science & Information Technology (IACSIT)
Member Antarabangsa
30/12/2017 - 30/12/2019 Malaysia Membrane Society (MyMembrane)
Timb. Pengerusi J/K Unit International Affairs Kebangsaan
15/07/2017 - 14/06/2019 Malaysia Membrane Society (MyMembrane)
Ahli Jawatankuasa Kebangsaan

Teaching Experience

YearDescriptionLevel
2016 BDB 40603 Advanced Polymer & Ceramic,BDA 10803- Material Science, Semester I & II 2017/2018 University
2016 BDA40502-Engineering Society, Semester II, 2015/2016, Semester 1 & II, 2016/2017, UTHM University
2016 BDA40502-Engineering Society; MDB10203-Advanced Materials Thermodynamic,Semester I, 2015/2016, UTHM University
2010 Materials Science (BPC3053), Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Advanced Materials Thermodynamic (Master), Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Advanced Materials Thermodynamic (Master), Sesi 20102011 Semester 1, Universiti Tun Hussein Onn Malaysia, 2010 University
2010 Advanced Ceramic (Master), Sesi 20102011 Semester 2, Universiti Tun Hussein Onn Malaysia, 2010 University
2009 Thermodynamic Materials, Sesi 20092010 Semester 3, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Makmal Sains Bahan (Diploma), Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Materials Science (BPC3053), Sesi 20092010 Semester 1, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Thermodynamic Materials, Sesi 20092010 Semester 3, Universiti Tun Hussein Onn Malaysia, 2009 University
2009 Materials Science (BDA1032), Sesi 20092010 Semester 2, Universiti Tun Hussein Onn Malaysia, 2009 University
2008 Thermodynamic Materials , Sesi 20082009 Semester 3, Universiti Tun Hussein Onn Malaysia, 2008 University
2007 Materials Science (BPC3063), Sesi 20072008 Semester 2, Universiti Tun Hussein Onn Malaysia, 2007 University
2002 Advanced Materials (BMB4014), Sesi 20022003 Semester 2, Universiti Tun Hussein Onn Malaysia, 2002 University
2001 Materials Science (BDA1032), Sesi 20012002 Semester 1, Universiti Tun Hussein Onn Malaysia, 2001 University
2001 Advanced Materials (BMB4014), Sesi 20012002 Semester 2, Universiti Tun Hussein Onn Malaysia, 2001 University
2001 Materials Technology (BMB4013), Sesi 20012002 Semester 1, Universiti Tun Hussein Onn Malaysia, 2001 University
2001 Static (BKF1123), Sesi 20012002 Semester 2, Universiti Tun Hussein Onn Malaysia, 2001 University
2000 Materials Technology (BMB4013), Sesi 20002001 Semester 1, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Materials Science (BDA1032), Sesi 20002001 Semester 1, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Materials Technology (Diploma), Sesi 20002001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2000 University
2000 Advanced Materials (BMB4014), Sesi 20002001 Semester 2, Universiti Tun Hussein Onn Malaysia, 2000 University
1999 Drawing (Degree), Sesi 19992000 Semester 1, Universiti Tun Hussein Onn Malaysia, 1999 University
1999 Materials Technology (Diploma), Sesi 19992000 Semester 1, Universiti Tun Hussein Onn Malaysia, 1999 University
1999 Materials Science (BDA1032), Sesi 19992000 Semester 1, Universiti Tun Hussein Onn Malaysia, 1999 University
1998 Materials Science (BDA1032), Sesi 19981999 Semester 2, Universiti Tun Hussein Onn Malaysia, 1998 University

Research Grants And Contracts

CodeTitleDesignationEnd Date
K041 Hydrothermal Alkaline Activation for sustainable and Economical Zeolite Synthesis Ketua 31/12/2020
K050 A novel approach on fabrication of high strength green carbon foam composite from botanical hydrocarbon champor and carbon whisker. Ahli 31/12/2020
1631 Elucidating rheological and phase inversion mechanism of in-situ synthesis zinc oxide/polysulfone membrane Ahli 14/08/2020
H179 Influence of rare earth additions on solidification, microstructure and mechanical properties of Al-17Si-4Cu (LM30) hypereutectic cast alloys Ahli 30/06/2020
H204 The Open Air Electrical-Field Activated Sintering and Forming of Micro-Components Ahli 30/06/2020
T001 Tajuk Program:Antifouling Enchancement for membrance water separation performance via iosynthesis additive and second order Back Propagation Neural Network (BPNN) optimization technique Tajuk Projek : Antifouling study of the ZnO bio-synthesis polymer mixed matric membrane using various natural organic matter (NOM) medium Ketua 30/11/2019
1621 Thermodynamic stability study of the phase inversed membrane via controlling coagulations bath parameters Ketua 31/07/2019
C071 Seed Funding for Industrial Visits Ahli 30/06/2019
D005 Antifouling Enhancement of Biosynthesized Membrane for Water Separation Using Back Propagation Neural Network (BPNN) Ketua 17/06/2019
U738 Zeolite thin membrane supported onto kaolin hollow fibre for gas separation Ketua 31/03/2019
1617 A New Technique to Enhance Anti-Fouling Property of Thin Film Nanocomposite Membrane with Improved Water Flux: Incorporating Metal-Organic Frameworks into a Substrate Layer Ahli 31/01/2019
U244 STUDIES ON FOULING BY NATURAL ORGANIC MATTER (NOM) ON POLYSULFONE MEMBRANES:EFFECTS OF POLYETHYLENE GLYCOL (PEG) Ahli 30/11/2018
U690 Insentif Kecemerlangan Penyelidikan dan Inovasi 2016 Ahli 31/03/2018
U399 Processability Of Waste Fish Scales Via Powder Injection Molding For Implant Application Ahli 31/03/2017
1422 The effects of rare-earth metals on solidification rate, microstructure and mechanical properties of aluminium Al-Si12 alloy casting Ahli 30/11/2016
1426 The Relationship of The Chip Size with Oxide Precipitation on The Mechanical and Physical Properties of The Recycled Aluminum Alloy (AA6061) in Hot Press Forging Ahli 30/11/2016
E023 Establishing New High Strength, Creep And Corrosion Resistant Magnesium Casting Alloy At Elevated Temperature Ahli 30/11/2016
1323 Multi-Band Characterizable Graphite Based Antenna With Low Cross Polarization Performance For Radio Astronomy Systems Ahli 31/05/2016
E026 The Effect Of Aqueous Enviroment In Abrasion-Corrosion Of Coating And Thin Film Ahli 31/05/2016
A022 High Performance Polymeric Materials Ahli 29/02/2016
E027 Low Temperature Formation Of Zinc Oxide (Zno) Nanostructure For Solar Cells Application Ahli 29/02/2016
1118 The Effects Of Cr Addition On Corrosion Resistance, Solidification Rate, Microstructure And Mechanical Properties Of Aluminium Alloy (LM6) Ahli 30/11/2015
1409 Development Of Hybrid Ceramic Membrane For Water Seperation Ketua 30/04/2015
C056 Advanced Manufacturing And Material Center (AMMC), UTHM Ahli 28/02/2015
1197 Development Of Ceramic Membranes For Seperation Process Ketua 31/08/2014
1198 Preparation and Characterization Of Polysulfone Membrane Using Poly (Vinyl Butyral) As Additive Ketua 31/08/2014
1124 The Influence Of Additive To Antifouling Mechanism Of Membrane Separation Process Ketua 31/05/2014
1125 Pre and Post Treatment For Anti-Fouling Mechanism Of Membrane Separation Process Ketua 31/05/2014
0754 Synthesis And Anti-Fouling Performance Studies Of Polysulfone-Grafted-Methyl Methacrylate Membrane Ahli 28/02/2014
0745 Synthesis and Characterisation Studies on Surface Modification of Multilayer and Hybrid Porous Membrane Via Different Fabrication Methods Ahli 31/05/2013
0746 Consolidation of Ceramic Porous Membrane Via Different Fabrication Methods Ketua 31/05/2013
0728 Application of Design Element Concept to Die Casting Process Ahli 28/02/2012
0731 Analytical and Experimental Study of a Novel Gas Distributor for a Swirling Fluidization Ahli 28/02/2012
0814 Shell mould drying process for investing casting Ketua 30/09/2011
0499 Investigation of the drying for ceramic shell mould system Ketua 15/10/2010
0002 Sintering and characteristics of aluminium alloy composite reinforced intermetallic particle Ketua 29/02/2004

Publications

Book Chapters
NURASYIKIN MISDAN, AHMAD FAUZI ISMAIL, ZAWATI HARUN, NORHANIZA YUSOF, NUR HANIS HAYATI HAIROM & NIK ABDUL HADI SAPIAA@MD NORDIN
(2017) A New Technique To Enhance Anti-Fouling Property Of Thin Film Nanocomposite Membrane With Improved Water Flux: Incorporating Metal-Organic Frameworks Into A Substrate Layer, Advanced Technology Centre Research And Innovation, UTHM , 75, ISBN:9789672110101
Mohd Faizal bin Mohideen Batcha, Vijay R. Raghavan, Hamidon Salleh, Zawati Harun, Suzairin Md Seri
(2016) Analytical And Experimental Study Of A Novel Gas Distributor For Swirling Fluidization, Recent Research And Developments In Center For Energy & Industrial Environment Studies, UTHM , 22, ISBN:9789670764955
Z Harun, TC Ong
(2016) Dynamic Drying Variables Evolution In Membrane Structure, Drying And Energy Technologies , Springer International Publishing , 131, ISBN:9783319197661
Zawati Harun , Tze Ching Ong , David Gethin , and Ahmad Fauzi Ismail
(2016) Simulation Of Drying For Multilayer Membrane , Membrane Technology For Water And Wastewater Treatment, CRCnetBASE , 167, ISBN:9781315645773
Z Harun, Muhamad Zaini Yunos, Mohd Riduan Jamalludin,
(2014) Effect Of Operating Condition On Polysulfone/Peg/Silica Membrane Fouling In Wastewater Separation, Advanced Materials And Information Technology Processing, WIT Press , 99, ISBN: 9781845648534
Z. Harun, TC Ong
(2014) Material Parameters Sensitivity In Modeling Drying Of Porous Materials, Advanced Materials And Information Technology Processing, WIT Press , 91, ISBN:9781845648534
General Publications
Zawati Binti Harun
(2010) Drying Techniques Of Ceramic Shell Mould, Artikel Buletin FKMP, 2010
Zawati Harun
(2010) Engineering Mechanical Practice Iii & Iv (Bda 2801, Bda 2811), UTHM
Zawati Harun
(2010) Mech. Eng. Practice Iii (Bda 2801), UTHM
Zawati Binti Harun
(2010) Mechanical Engineering Practice Iii (Air Conditioning) Bda2801-2nd, UTHM
Zawati Binti Harun
(2008) Engineering Materials Science (Bda 1032/Bda 1602), UTHM
Journal
Siti Salwa Alias, Zawati Harun, Muhamad Fikri Shohur
(2019) Effect Of Monovalent And Divalent Ions In Non Solvent Coagulation Bath Induced Phase Inversion On The Characterization Of A Porous Polysulfone Membrane, POLYMER BULLETIN, Springer-Verlag GmbH Germany , 2, 1, ISSN:14362449
Siti Salwa Alias, Zawati Harun, Faiz Hafeez Azhar, Khairul Nazri Yusof, Mohd Riduan Jamalludin, Siti Khadijah Hubadillah, Shah Nor Basri, Mamdouh A.Al-Harthi
(2019) Enhancing The Performance Of A Hybrid Porous Polysulfone Membrane Impregnated With Green Ag/Ago Additives Derived From The Parkia Speciosa, VACUUM, PERGAMON-ELSEVIER SCIENCE LTD , 5, 301, ISSN:0042207X
Siti Salwa Alias, Zawati Harun, & Nur Farhani Ismail
(2019) Microstructure And Physical Characterization Of Alumina-Sintered Body Via Hot Isostatic Pressing, JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, Springer Nature , 2, 1, ISSN:25101579
N. Sazalia, W. N. W. Salleh N. Arsat, Z. Harun, K. Kadirgama
(2019) P84 Co-Polyimide-Based Tubular Carbon Membrane: Effect Of Pyrolysis Temperature, JOURNAL OF APPLIED MEMBRANE SCIENCE & TECHNOLOGY, UTM , 1, 17, ISSN:26009226
Tijjani Abdullahi, Zawati Harun, Mohd Hafiz Dzarfan Othman, Khairul Nazri Yusof, Ainun Rahmawati, Muhamad Zaini Yunos, Mohd Amri Lajis, Yusri Yusof
(2019) Preliminary Studies On Hydrothermal Synthesis Of Zeolite From Malaysian Kaolinite Clays, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, UTM press , 6, 78, ISSN:2289599X
Tijjani Abdullahi, Norhayati Ahmad, Mat Uzir Wahit and Zawati Harun,
(2018) Adhesive Bonding Of Thermoplastic Polyurethane With Metallic Wire, ADVANCED SCIENCE LETTERS, American Scientific Publishers , 6, 4045, ISSN:19366612
Siti Salwa Alias, Zawati Harun, Intan Suyana Abd Latif
(2018) Characterization And Performance Of Porous Photocatalytic Ceramic Membranes Coated With Tio2 Via Different Dip-Coating Routes, JOURNAL OF MATERIALS SCIENCE, Springer , 8, 11534, ISSN:00222461
Norazlianie Sazali , Wan Norharyati Wan Salleh, Ahmad Fauzi Ismail, Kumaran Kadirgama, Mohamad Shahrizan Moslan, Faten Ermala Che Othman , Nor Hafiza Ismail , Mahendran Samykano, Zawati Harun
(2018) Effect Of Heating Rates On The Microstructure And Gas Permeation Properties Of Carbon Membranes, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES , UTM , 9, 378, ISSN:2289599X
Siti Khadijah Hubadillah, Mohd Hafiz Dzarfan Othman, TakeshiMatsuuraa, A.F.Ismail, Mukhlis A.Rahman, ZawatiHarun, Juhana Jaafar, Mikihiro Nomura
(2018) Fabrications And Applications Of Low Cost Ceramic Membrane From Kaolin: A Comprehensive Review, CERAMICS INTERNATIONAL, Elsevier , 4, 4538, ISSN:02728842
Mohd Riduan Jamalludin, Siti Khadijah Hubadillah , Zawati Harun ,Mohd Hafiz Dzarfan Othman, Muhamad Zaini Yunos , Ahmad Fauzi Ismail, Wan Norharyati Wan Salleh
(2018) Facile Fabrication Of Superhydrophobic And Superoleophilic Green Ceramic Hollow Fiber Membrane Derived From Waste Sugarcane Bagasse Ash For Oil/Water Separation, ARABIAN JOURNAL OF CHEMISTRY, Elsevier , 12, 1, ISSN:18785352
Siti Khadijah Hubadillah, Mohd Hafiz Dzarfan Othman, Zawati Harun, Mohd Riduan Jamalludin,Mohd Izzat Iqbal Mohd Zahar1, A. F. Ismail, Mukhlis A. Rahman, Juhana Jaafar
(2018) High Strength And Antifouling Metakaolin-Based Ceramic Membrane For Juice Clarification, JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, Spinger Singapore , 8, 1, ISSN:25101560
Nurafiqah Rosman, WNW Salleh, Mohamad Azuwa Mohamed, J Jaafar, AF Ismail, Z Harun
(2018) Hybrid Membrane Filtration-Advanced Oxidation Processes For Removal Of Pharmaceutical Residue, JOURNAL OF COLLOID AND INTERFACE SCIENCE, Elsevier , 12, 236, ISSN:00219797
S. H. M. Akhair, Z. Harun, H. Basri, R. A. R. Ahmad, A. Q. A. Rashid, F. H. Azhar
(2018) Hydrophobicity Properties Of Graphite And Reduced Graphene Oxide Of The Polysulfone (Psf) Mixed Matrix Membrane, INTERNATIONAL JOURNAL OF ENGINEERING, TRANSACTIONS B: APPLICATIONS, UTHM , 1, 111, ISSN:1728144X
Zawati Harun, Tze Ching Ong , Takeshi Matsuura , Siti Khadijah Hubadillah , Mohd Hafiz Dzarfan Othman , Ahmad Fauzi Ismail
(2018) Modelling Of Transport Mechanisms And Drying Shrinkage For Multilayer Ceramic Membrane Structure, CHEMICAL ENGINEERING RESEARCH AND DESIGN, Elsevier , 5, 111, ISSN:02638762
Mohd Riduan Jamalludin, Zawati Harun, Mohd Hafiz Dzarfan Othman, Siti Khadijah Hubadillah, Muhamad Zaini Yunos, Ahmad Fauzi Ismail,
(2018) Morphology And Property Study Of Green Ceramic Hollow Fiber Membrane Derived From Waste Sugarcane Bagasse Ash (Wsba), , CERAMICS INTERNATIONAL , Elsevier , 7, 18450, ISSN:02728842
Mohd Riduan Jamalludin, Siti Khadijah Hubadillah, Zawati Harun, Mohd Hafiz Dzarfan Othman, Muhamad Zaini Yunos
(2018) Novel Superhydrophobic And Superoleophilic Sugarcane Green Ceramic Hollow Fibre Membrane As Hybrid Oil Sorbent-Separator Of Real Oil And Water Mixture, MATERIALS LETTERS, Elsevier , 12, 139, ISSN:0167577X
Khairul Nazri Yusof , Siti Salwa Alias, Zawati Harun, Hatijah Basri, Faiz Hafeez Azhar
(2018) Parkia Speciosa As Reduction Agent In Green Synthesis Silver Nanoparticles, CHEMISTRY SELECT, WILEY-V C H VERLAG GMBH , 8, 8881, ISSN:23656549
Nurafiqah Rosmana, Wan Norharyati Wan Salleha, Ahmad Fauzi Ismaila, Juhana Jaafara , Zawati Harun , Farhana Aziza, Mohamad Azuwa Mohamedd, Bunsho Ohtanie, Mai Takashima
(2018) Photocatalytic Degradation Of Phenol Over Visible Light Active Zno/Ag2co3/Ag2o Nanocomposites Heterojunction., JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A: CHEMISTRY, Elsevier , 9, 602, ISSN:10106030
N. Sazali, W. N. W. Salleha, M. Nur Izwanne, Z. Harun, & K. Kadirgama
(2018) Precursor Selection For Carbon Membrane Fabrication: A Review, JOURNAL OF APPLIED MEMBRANE SCIENCE & TECHNOLOGY, UTM press , 12, 131, ISSN:26009226
N. H. Kamarudin, Z. Harun, M. H. D. Othman, S. K. Hubadillah, M. R. Jamaluddin, K. N. Yusof
(2018) Preliminary Characterization Of Corn Cob Ash As An Alternative Material For Ceramic Hollow Fiber Membrane (Chfm/Cca), INTERNATIONAL JOURNAL OF ENGINEERING, TRANSACTIONS B: APPLICATIONS, International Journal of Engineering , 8, 1389, ISSN:1728144X
Faiz Hafeez Azhar , Zawati Harun, Muhamad Zaini Yunos , Azlinorazia Ahmad , Siti Hajar Mohd Akhair , Raja Adibah Raja Ahmad , Abdul Qaiyyum Abd Rashid , Rosniza Hussin , Siti Aida Ibrahim, Mohd Khairul Ahmad
(2018) Significant Effect Of Concentration Ratio In Synthesizing Titania Nanoflowers (Tnf) Powder Via Facile Hydrothermal Method, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES, Universiti Teknologi Malaysia , 9, 397, ISSN:2289599X
A. Q. A. Rashid, Z. Harun, M. Z. Yunos, A. Ahma, R. A. R. Ahmad, F. H. Azhar
(2018) The Coating Effect Of Pani/Silver On Performance Of Polysulfone Membrane Toward Protein Separation, INTERNATIONAL JOURNAL OF ENGINEERING, Transactions B: Applications, IJE TRANSACTIONS B: Basics , 8, 1406, ISSN:1728144X
Tijjani Abdullahi, Zawati Harun, Mohd Hafiz Dzarfan Othman , Nasiru Aminu , Oguntunde Gabriel , Tijjani Aminu , Siti Aida Ibrahim , Noor Hasliza Kamarudin
(2018) West African Kenaf (Hibiscus Cannabinus L.) Natural Fiber Composite For Application In Automotive Industry, MALAYSIAN JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES , UTM Press. , 12, 397, ISSN:2289599X
Hubadillah S.K., Othman M.H.D., Harun Z., Ismail A.F., Rahman M.A., Jaafar J.
(2017) A Novel Green Ceramic Hollow Fiber Membrane (Chfm) Derived From Rice Husk Ash As Combined Adsorbent-Separator For Efficient Heavy Metals Removal, CERAMICS INTERNATIONAL, Elsevier Ltd , 1, 4716, ISSN:2728842
Abdullahi T., Harun Z., Othman M.H.D.
(2017) A Review On Sustainable Synthesis Of Zeolite From Kaolinite Resources Via Hydrothermal Process, ADVANCED POWDER TECHNOLOGY, Elsevier B.V. , 5, 1827, ISSN:9218831
Mohammed Abdulmunem Abdulhameed, Mohd Hafiz Dzarfan Othman, Ahmad Fauzi Ismail, Takeshi Matsuura, Zawati Harun, Mukhlis A. Rahman, Mohd Hafiz Puteh, Juhana Jaafar, Masoud Rezaei, Siti Khadijah Hubadillah
(2017) Carbon Dioxide Capture Using A Superhydrophobic Ceramic Hollow Fibre Membrane For Gas-Liquid Contacting Process, JOURNAL OF CLEANER PRODUCTION , Elsevier , 1, 1731, ISSN:09596526
Nazri Mohd Nawi, Noorhamreeza Abdul Hamid , Noor Azah Samsudin , Zawati Harun , Mohd Firdaus Ab Aziz , Azizul Azhar Ramli
(2017) Cause And Effect Prediction In Manufacturing Process Using An Improved Neural Networks, INTERNATIONAL JOURNAL ON ADVANCED SCIENCE, ENGINEERING AND INFORMATION TECHNOLOGY, INSIGHT - Indonesian Society for Knowledge and Human Development , 4, 2027, ISSN:20885334
Akhair S.H.M., Harun Z., Jamalludin M.R., Shuhor M.F., Kamarudin N.H., Yunos M.Z., Ahmad A., Azhar M.F.H.
(2017) Effect Of Graphene Oxide With Controlled Stirring Time, CHEMICAL ENGINEERING TRANSACTIONS, Italian Association of Chemical Engineering - AIDIC , 7, 709, ISSN:22839216
Ahmad A., Yunos M.Z., Harun Z., Hassan M.F., Adzila S., Arifin A.M.T., Rahman M.N.A., Haq R.H.A.
(2017) Effect Of Polyaniline On Surface Properties Of Polysulfone Membrane, CHEMICAL ENGINEERING TRANSACTIONS, Italian Association of Chemical Engineering - AIDIC , 7, 691, ISSN:22839216
Abdulmunem Abdulhameed, Mohd Hafiz Dzarfan Othman, Haider Nadhom Azziz Al Joda, Ahmad Fauzi Ismail, Takeshi Matsuura, Zawati Harun, Mukhlis A Rahman, Mohd Hafiz Puteh, Juhana Jaafar
(2017) Fabrication And Characterization Of Affordable Hydrophobic Ceramic Hollow Fibre Membrane For Contacting Processes, JOURNAL OF ADVANCED CERAMICS, springer , 12, 330, ISSN:22264108
Ahmad A., Yunos M.Z., Harun Z., Hassan M.F., Adzila S., Arifin A.M.T., Rahman M.N.A., Haq R.H.A., Baharulrazi N.
(2017) Performance Of Polysulfone/Pani Membrane For Humic Acid Separation, CHEMICAL ENGINEERING TRANSACTIONS, Italian Association of Chemical Engineering - AIDIC , 1, 703, ISSN:22839216
Akhair S.H.M., Harun Z., Jamalludin M.R., Shuhor M.F., Kamarudin N.H., Yunos M.Z., Ahmad A., Azhar M.F.H.
(2017) Polymer Mixed Matrix Membrane With Graphene Oxide For Humic Acid Performances, CHEMICAL ENGINEERING TRANSACTIONS, Italian Association of Chemical Engineering - AIDIC , 7, 697, ISSN:22839216
Mohammed Abdulmunem Abdulhameed & Mohd Hafiz Dzarfan Othman & Ahmad Fauzi Ismail & Takeshi Matsuura & Zawati Harun & Mukhlis A Rahman & Mohd Hafiz Puteh & Juhana Jaafar
(2017) Preparation And Characterisation Of Inexpensive Porous Kaolin Hollow Fibre As Ceramic Membrane Supports For Gas Separation Application, JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY, springer , 11, 645, ISSN:25101579
Hubadillah S.K., Othman M.H.D., Harun Z., Ismail A.F., Rahman M.A., Jaafar J., Jamil S.M., Mohtor N.H.
(2017) Superhydrophilic, Low Cost Kaolin-Based Hollow Fibre Membranes For Efficient Oily-Wastewater Separation, MATERIALS LETTERS, Elsevier B.V. , 1, 119, ISSN:0167577X
Salem A. Bagaber, Tijjani Abdullahi, Zawati Harun, Nated Daib, Mohd Hafiz D. Othman
(2017) The Effect Of Lanthanum Addition On The Microstructure And Mechanical Properties Of A390 Aluminium Alloy, ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, , Springer , 11, 4559, ISSN:13198025
Zawati Harun*, Khairul Nazri Yusof, Muhamad Zaini Yunos, Muhamad Fikri Shohur, Mohd Riduan Jamalludin
(2016) Antibacterial Polysulfone Membranes: The Effect Of Eugenol And Zinc Oxide As Additives, MATERIALS SCIENCE FORUM, Trans Tech Publications Ltd. , 8, 132, ISSN:16629752
Mohd Riduan Jamalludin, Zawati Harun, Siti Khadijah Hubadillah, Hatijah Basri, Ahmad Fauzi Ismail, Mohd Hafiz Dzarfan Othman, Mohd Fikri Shohur, Muhamad Zaini Yunos
(2016) Antifouling Polysulfone Membranes Blended With Green Sio2 From Rice Husk Ash (Rha) For Humic Acid Separation, CHEMICAL ENGINEERING RESEARCH AND DESIGN, Elselvier , 1, 268, ISSN:0263-8762
N. Sazali, W.N.W. Salleh, A.F. Ismail, N.A.H.M. Nordin, Zawati Harun
(2016) Co2 Separation Through Carbon Tubular Membranes: Effect Of Polymer Composition, ADVANCES IN RENEWABLE ENERGY (ARE), Avestia Publishing , 11, 7, ISSN:12345678
Zawati Harun and Tze Ching Ong
(2016) Dynamic Drying Variables Evolution In Membrane Structure , ADVANCED STRUCTURED MATERIALS, springer , 131, ISSN:18698433
Siti Khadijah Hubadillah, Mohd Hafiz Dzarfan Othman, Zawati Harun, A.F. Ismail, Yuji Iwamoto, Sawao Honda, Mukhlis A. Rahman, Juhana Jaafar, Paran Gani, Mohd Nazri Mohd Sokri
(2016) Effect Of Fabrication Parameters On Physical Properties Of Metakaolin-Based Ceramic Hollow Fibre Membrane (Chfm), CERAMICS INTERNATIONAL, Elsevier , 15547, ISSN:02728842
SK Hubadillah, Z Harun, MHD Othman, AF Ismail, P Gani
(2016) Effect Of Kaolin Particle Size And Loading On The Characteristics Of Kaolin Ceramic Support Prepared Via Phase Inversion Technique, JOURNAL OF ASIAN CERAMIC SOCIETIES, Elsevier , 6, 164, ISSN:21870764
ZAWATI HARUN, MUHAMAD ZAINI YUNOS, KHAIRUL NAZRI YUSOF, MUHAMAD FIKRI SHOHUR, W.J. LAU, W.N.W. SALLEH
(2016) Optimization And Characterization Of Polysulfone Membranes Made Of Zinc Oxide, Polyethylene Glycol And Eugenol As Additives, JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, School of Engineering, Taylor?s University , 1001, ISSN:18234690
Hubadillah, S.K. , Harun, Z., Othman, M.H.D., Ismail, A.F., Salleh, W.N.W., Basri, H., Yunos, M.Z., Gani, P.
(2016) Preparation And Characterization Of Low Cost Porous Ceramic Membrane Support From Kaolin Using Phase Inversion/Sintering Technique For Gas Separation: Effect Of Kaolin Content And Non-Solvent Coagulant Bath, CHEMICAL ENGINEERING RESEARCH AND DESIGN, Elselvier , 8, 24, ISSN:0263-8762
Siti Khadijah Hubadillah, Zawati Harun, Mohd Hafiz Dzarfan Othman et. al.
(2016) Preparation And Characterization Of Low Cost Porous Ceramic Membrane Support From Kaolin Using Phase Inversion/Sintering Technique For Gas Separation: Effect Of Kaolin Content And Non-Solvent Coagulant Bath, CHEMICAL ENGINEERING RESEARCH AND DESIGN, Elsevier , 8, 24, ISSN:0263-8762
Harun.Z, Ong.T.C
(2015) A Complete Mathematical Model Of Convective Drying In Membrane Fabrication, CHEMICAL ENGINEERING TRANSACTIONS, AIDIC , 10, 1405, ISSN:22839216
N Sazali, Z Harun, W N W Salleh, N A H Nordin, N Yousof and A F Ismail
(2015) Gas Permeation Properties Of The Matrimid Based Carbon Tubular Membrane: The Effect Of Carbonization Temperature, INTERNATIONAL JOURNAL OF CONCEPTIONS ON MECHANICAL AND CIVIL ENGINEERING , IJCMCE , 4, 1, ISSN:2357 2760
N Sazali, W Salleh, W Norharyati, M Nordin, NA Hadi, Z Harun, AF Ismail
(2015) Matrimid Based Carbon Tubular Membranes: The Effect Of The Polymer Composition, JOURNAL OF APPLIED POLYMER SCIENCE, Wiley , 5, ISSN:10974628
Z Harun, NH Kamarudin, M Ibrahim, MI Idris, S Ahmad
(2015) Reinforced Green Ceramic Shell Mould For Investment Casting Process, ADVANCED MATERIALS RESEARCH, Trans Tech , 2, 415, ISSN:16628985
Zawati Harun
(2002) Changes Of Fe Matrix'S Lattice Constant During Liquid Phase Sinteringof Fe-Cu-C Compacts By X-Ray Diffraction Technique, MALAYSIAN JOURNAL OF SCIENCE, malaysian Journal of science , 59, ISSN:13943065
Zawati Harun
(2002) Monitoring Alloy Fomation During Mechanical Alloying Process By X-Ray Diffraction Techniques, MALAYISIAN JOURNAL OF SCIENCE, Malaysian Journal of Science , 173, ISSN:13943065
Prosiding / Seminar
Tijjani Abdullahi, Zawati Harun, Muhd Hafiz Dzarfan Othman, Awwal Hussain Nuhu, Jamilu Usman
(2019) Conversion And Characterization Of Synthetic Zeolite Obtained Using Low Grade Kaolin From Mersing Area Of Johor, AIP PUBLISHING , 020102-1, ISBN:9780735415652
MOHD RIDUAN JAMALLUDIN, ZAWATI HARUN, SITI KHADIJAH HUBADILLAH, MOHD HAFIZ DZARFAN OTHMAN, NOOR HASLIZA KAMARUDIN, MUHAMAD ZAINI YUNOS, RAS IZZATI ISMAIL, LAILINA N. M
(2018) Optimization Of Polysulfone/Graphene Oxide/Triaminopyrimidine By Using Response Surface Methodology, IOP PUBLISHING LTD , 1, ISBN:17578981
Mohd Riduan Jamalludin, Zawati Harun, M. S. Zakaria, Wan Mohd Faizal, Wan Abd Rahim, C. Y. Khor, M. U. Rosli, Muhammad Ikman Ishak, and M. A. M. Nawi
(2018) Performance Studies Of Polysulfone-Based Membrane: Effect Of Silver Acetate Morphology, AMERICAN INSTITUTE OF PHYSICS , 020017-1, ISBN:9780735417526
Muhamad Syafiq Mohamad Sofian, Muhamad Zaini Yunos, Azlinnorazia Ahmad, Zawati Harun, Siti Hajar Mohd Akhair, Raja Adibah Raja Ahmad, Faiz Hafeez Azhar, Abdul Qaiyyum Abd Rashid, Al Emran Ismail
(2017) Effect Of Solvent Concentration On Performance Of Polysulfone Membrane For Filtration And Separation, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Nazrul Shahfiq Zulkifli, Muhamad Zaini Yunos, Azlinnorazia Ahmad, Zawati Harun, Siti Hajar Mohd Akhair, Raja Adibah Raja Ahmad, Faiz Hafeez Azhar, Abdul Qaiyyum Abd Rashid, Al Emran Ismail
(2017) Influence Of Hydrophobic Surface Treatment Toward Performance Of Air Filter, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
Nazrul Shahfiq Zulkifli, Muhamad Zaini Yunos, Azlinnorazia Ahmad, Zawati Harun, Siti Hajar Mohd Akhair, Raja Adibah Raja Ahmad, Faiz Hafeez Azhar, Abdul Qaiyyum Abd Rashid, Al Emran Ismail
(2017) Morphology Studies Of Hydrophobic Silica On Filter Surface Prepared Via Spray Technique, INSTITUTE OF PHYSICS PUBLISHING , 1, ISBN:17578981
MOHD RIDUAN JAMALLUDIN, ZAWATI HARUN, M. S. ZAKARIA, WAN MOHD FAIZAL WAN ABD RAHIM, C. Y. KHOR, M. U.ROSLI, MUHAMMAD IKMAN ISHAK, M. A. M. NAWI, AND SUHAIMI SHAHRIN
(2017) The Effect Of Hydrophilicity Of Graphene Oxide As Additive Towards Performance Of Polysulfone Membrane, AIP PUBLISHING , 020141-1, ISBN:9780735415652
Harun Z., Yusof K.N., Yunos M.Z., Shohur M.F., Jamalludin M.R.
(2016) Antibacterial Polysulfone Membranes: The Effect Of Eugenol And Zinc Oxide As Additives, bosi edu , 132 , ISBN:1662-9752
Z. Harun, N. H. Ismail et. Al
(2010) Drying Of Layering Shell Mould For Investment Casting Process , UTHM , ISBN:978-967-5457-21-0
Zawati Binti Harun
(2010) Shell Mould Reinforced With Rice Husk, MYDEGS
Z. Harun, N. H. Kamarudin, M.S.Wahab et. al
(2010) Shell Mould With Treated Organic Fiber , UTHM , ISBN:978-967-5457-21-0
Zawati Harun, D.T.Gethin
(2009) Modeling And Simulation Of Drying Phenomena Using Diffusivity Terms, AEROTECH , ISBN:978-983-42130-2-2
Harun.Z, D.T.Gethin,
(2008) Drying Simulation Of Ceramic Shell Build Up Process, IEEE, Computer Society , ISBN:978-0-7695-3136-6
Z. Harun, D.T. Gethin, R.W. Lewis, W.J Ferguson
(2007) Drying Of A Multilayer Ceramic Shell Body, Civil_Comp Press , ISBN:9778-1-905088-13-3

Supervision

YearDescriptionRole
2018 PhD, Development of P84 CO-Polyimide-Based Carbon Membrane for Carbon Dioxide Separation Examiner
2017 FRGS & PRGS grantS phase 1/2017, UTHM Assessor
2017 Internal Examiner ; PhD in Science, Abdurrahman Garba; Title: Fabrication of A Low Cost Filter for the Removal of Heavy Metals and Organics in Water,FSTPi, UTHM,2017 Examiner
2017 Dr. Siti Salwa b. Alias, Post-Doctoral On-going Synthesis Nanoparticles Zinc Oxide for Photocatalyst Application, 2017-2019 Supervisor
2017 Supervisor for PhD student,Syamsutajri Syamsol Bahri; Title Development of photocatalyst Reactor for phenol contamination medium. (2017-2020) Supervisor
2017 External Examiner , Master Of Gas Engineering, Nor Hafiza bt. Ismail,Title :Disk supported carbon membrane derived from P84-polymide for CO2 separation.,Faculty Of Chemical Engineering and Energy UTM, 2017 Examiner
2017 Internal Examiner ; PhD in Science, Masooma Ifran; Title: Sulfonated Polyethersulfone and Functionanlized MWCNT/PVP Nanocomposite Based PES Ultrafiltration Membrane for Protein Separation.FSTPi, UTHM, Examiner
2017 co-supervisor for Mohammed Abdulmunem Abdulhameed (with Universiti Teknologi Malaysia), passed and graduated 2017, Title: Fabrication of Affordable hydrophobic Ceramic Hollow Fibre Membrane for Contacting process Supervisor
2017 External Examiner, Master Of Gas Engineering, Fadilah bt. Mohamed,; Title : Formic Acid Cross linked cellulose Acetate Defect-Free Asymmetric membrane for gas separation,Faculty Of Chemical Engineering and Energy. UTM, 2017 Examiner
2017 Supervisor for PhD student Abdul qaiyyum bin abd rasid @ abd rashid; Title Development of polymer mixed matrix membrane using biosynthesis ferum oxide particles as photocatalyst for organic contamination medium(2017-2020) Supervisor
2016 FRGS grant phase 1/2016 Assessor
2016 FRGS grant phase 1/2016 Assessor
2016 For Poster National Congress on Membrane Technology 2016 (NATCOM 2016) Assessor
2016 Supervisor for PhD student Khairul Nazri Yusof, Title Development of composite silver oxide of polymer mixed matrix membrane for purification of dye medium.(2014-2017) Supervisor
2016 Mohd Riduan Jamaludin Main supervisor for PhD Student Mohd Riduan Jamaludin Title Development of superoleophilic and photocatalytic Green Ceramic membrane derived from sugarcane bagasse ash via sol gel process (2015-2018) - passed and graduated Supervisor
2016 External Examiner, Master Of Gas Engineering, Hazlina bt. Junoh, Title : Formic Acid Crosslinked cellulose Acetate Defect-Free Asymmetric membrane for gas separation,Faculty Of Chemical Engineering and Energy. UTM, 2016 Examiner
2016 External Examiner, Master Of Gas Engineering, Nik Nurdhiya bt. Nik Mustofar; Title : Transport behavior of Proton and Methanol in SPEEK composite membrane for Direct Methanol Fuel Cell.Faculty Of Chemical Engineering and Energy. UTM, 2016 External Examiner
2016 External Examiner , Master Of Gas Engineering, Muhammad Taufiq Salleh, Title : Chemical Stability of Spek Nano Composite Membrane under Accelerated Stress Test,Faculty Of Chemical Engineering and Energy. UTM, 2016 External Examiner
2016 For Oral National Congress on Membrane Technology 2016 (NATCOM 2016) Assessor
2016 External Examiner, Master Of Philosophy, Maryam Mobaraki, Title : Design of experiment Computing for ship Oily water treatment using Nanocomposite Membrane,Faculty Of Chemical Engineering and Energy UTM, 2016 Examiner
2011 Supervisor for Muhammad Fariez Mohamad Radhi, "Study the surface modification technique in preparing the porous hybrid membrane layer", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Mohd Zulhilmi Mohd Zaini, "The effect of silica from the rice husk to the ceramic structure", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Alias sidek, "Synthesis of porous hybrid membrane", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Hafizul Jani, "Preparation of polysulfone membrane", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Wan Mohd Akmal Wan Mohd Raziff, "Reduction of shrinkage problem in ceramic (membrane) using rice husk", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Mohd Arif Mohd Zin, "Shrinkage reduce in ceramic structure controlling processing parameter(firing stage/drying stage) ", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Khairul Azam Mustafa, "Drying effect of the ceramic shell mould reinforced with rice husk", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Zaulfazli Mohd Azmi, "Shell mould reinforced rice husk", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Zamir, "Hybrid polymer and ceramic membrane for liquid filteration", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Nor Zarina Md Tahir "Develop a Composite using Fiberglass and coconut fiber under laminate fabrication", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Enna Yulieana Suleiman, "Investigation of the properties and the effect of fibre size on the ceramic shell mould reinforced with rice husk", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Muhammad Fariez Mohamad Radhi, "Study on the surface modification technique in preparing the porous hybrid membrane layer", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Mohd zulfadli Muhammad Hashim, 'Study of fracture and its morphology reinforced ceramic", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Wan Rasfan Wan Abdul Rahim, 'Fouling Study of Polysulfone membranes by humic Acid", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Main Supervisor for Muhammad Zaini Yunos, PhD Mechanical, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2011 Supervisor for Mohd alhafizhu Othman, "Preparation of polyethersulfone membrane", PSM, Universiti Tun Hussein Onn Malaysia, 2011 Supervisor
2010 Supervisor for PG Azlan PG Mohd Zain, "Effect of swirling flow fluidized bed drying of porous material", PSM, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Co-Supervisor for Shahara Mohd Nasir, Master Mechanical, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Main Supervisor for Ong Zhe Ching, PhD Mechanical, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Co- Supervisor for Lily Siong, PhD Mechanical, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Mohd Afindi, "Polymer membrane for liquid filteration process", PSM, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2010 Supervisor for Siti Noor Aida Ahmad, "Kesan pengeringan keatas gentian pelepah kelapa sawit dalam jasad komposit", PSM, Universiti Tun Hussein Onn Malaysia, 2010 Supervisor
2009 Main Supervisor for Nur Fahani Ismail, Master Mechanical, Universiti Tun Hussein Onn Malaysia, 2009 Supervisor
2009 Main Supervisor for Noor Hasliza kamarudin, Master Mechanical, Universiti Tun Hussein Onn Malaysia, 2009 Supervisor
2009 Supervisor for Mohd Ridzuan Mat Saman, "Penyelidikan sifat pengeringan ke atas bahan poros (habuk kayu, pelepah kelapa sawit dan batu bata)", PSM, Universiti Tun Hussein Onn Malaysia, 2009 Supervisor
2009 Supervisor for Nor Azizah Mohamad , "Mengkaji kesan penambahan gentian pelepah kelapa sawit ke atas sifat-sifat acuan penuangan (shell mould)", PSM, Universiti Tun Hussein Onn Malaysia, 2009 Supervisor
2009 Supervisor for Azizee Mohamad, "Kesan pengeringan terhadap sifat-sifat seramik shell mould", PSM, Universiti Tun Hussein Onn Malaysia, 2009 Supervisor
2004 Supervisor for Fazimah Mat Noor, "Pencirian aloi Ai-Cu-Mg dan komposit yang dihasilkan melalui kaedah pengaloian mekanikal komponen-komponen unsut", PSM, Universiti Tun Hussein Onn Malaysia, 2004 Supervisor
2004 Supervisor for Ng Wan Ying , " Pensinteran dna pencirian komposit aloi aluminium 7075 yang ditetulangi dengan intermetalik NiAl ", PSM, Universiti Tun Hussein Onn Malaysia, 2004 Supervisor
2004 Supervisor for Sarvithra Rao a/l Krishnamurthy , "Syntesis of composite intermetallics based on mechanical alloying and cold compaction", PSM, Universiti Tun Hussein Onn Malaysia, 2004 Supervisor
2004 Supervisor for Marziana Hashim , "Kesan Pengaloian mekanikal berdasarkan sintesis perambatan diri pada suhu tinggi terhadap fasa Ni-Si", PSM, Universiti Tun Hussein Onn Malaysia, 2004 Supervisor
2004 Supervisor for Muda Ibrahim, "Kajian kelakuan plat komposit hibrid terhadap gayalaku lesu", PSM, Universiti Tun Hussein Onn Malaysia, 2004 Supervisor
2003 Supervisor for Muhammad Murshid Haji Mohsin, "Kestabilan terma terhadap serbuk logam-logam oksida menggunakan kaedah pengaloian mekanikal", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Mohd Amirul Johari , "Hubungan di antara kerintangan elektrikal dan tekanan pemampatan pada campuran ferum-kuprum dan carbon ", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Chew Pong Chin, "Kesan REologi agen penyahngumpatan terhadap kekuatan jasad seramik dalam proses tuangan slip ", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Abdul Kalib Ramli, "Kajian pensinteran terhadap serbuk separa pengaloian mekanikal", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Ng Ser Lee , "Penghasilan aloi aluminium melalui kaedah metalurgi serbuk dengan teknik ngaloian mekanikal", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Ong Chi Zhe, "Penghasilan aloi aluminium intermetalik melalui kaedah metalurgi serbuk dengan teknik ngaloian mekanikal ", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Ng Ser Lee, "Penghasilan ali aluminium melalui kaedah metalurgi serbuk dengan teknik ngaloian mekanikal", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor
2003 Supervisor for Leong Yook Mun, "Kestabilan terma terhadap campuran Ni dan Ai serta NiO menggunakan kaedah pengaloian mekanikal ", PSM, Universiti Tun Hussein Onn Malaysia, 2003 Supervisor

Extension & Public Services

YearDescriptionLevel
2018 ITEX 2018, Silver Medal, EzGreen Cleaner, Zawati harun, Noor Hasliza Kamarudin, Tijjani Abdullah et. al, International
2018 Speaker, Writing workshop for postgraduate students UTHM University
2017 Chair and Conference's proceedings Guest-editor, 5th International Conference on Metallurgy Technology and Materials (5th ICMTM 2017). International
2017 Seoul International Invention Fair SIIF 2017, Silver Medal, K-Membrane : Smart Membrane for Oily-wastewater Treatment Mohd Hafiz Dzarfan Siti Khadijah Hubadillah, Mukhlis A. Rahman, Siti Hamimah Sheikh Abdul Kadir, Hafiz Puteh, Ahmad Fauzi Ismail, Mohd Ridhwan Adam , Zawati Harun, Juhana Jaafar International
2017 Ahli Jawatankuasa Unit (International Affairs), Malaysia Membrane Society (MyMembrane), Malaysia National
2017 Mohd Riduan Jamalludin, Nik Noriman Zulkepli, Zawati Harun, Siti kHadijah Hubadillah, Mohd Hafiz Dzarfan, Abdul Razak Shaari, Muhammad Zaini Yunos, Silver Medal, Novel Sugarcane Bagasse Ash For oily Waste Water Treatment. Malaysia Technology expo(MTE 2017) University
2017 Timbalan Pengerusi Jawatankuasa Unit (International Affairs), Malaysia Membrane Society (MyMembrane), Malaysia National
2017 Zawati harun, Noor Hasliza Kamarudin, Tijjani Abdullah et. al, EZGreen Cleaner Gold Medal , International Invention & Innovative Competition (InIIC 2017), 2017. International
2017 Editor for Metallurgy Technology and Materials V, Vol 904, , Trans Tech Publication, 2017, doi: https://doi.org/10.4028/www.scientific.net/MSF.904 ISBN: 978-3-0357-1192-9 International
2017 Seoul International Invention Fair SIIF 2017, Gold Medal & Outstanding Invention Awards,Sil-RH Membrane Distillation : From sea water to Drinking water Mohd Hafiz Dzarfan Siti Khadijah Hubadillah, Mukhlis A. Rahman, Siti Hamimah Sheikh Abdul Kadir, Hafiz Puteh, Ahmad Fauzi Ismail, Juhana Jaafar, Mohd Ridhwan Adam , Zawati Harun International
2017 Reviewer for Jurnal Teknologi, UTM University
2017 EZGreen Cleaner, Zawati harun, Noor Hasliza Kamarudin, Tijjani Abdullah et. al, Research and Innovation festival ( R&1 2017), Bronze Medal UTHM University
2016 Chair and Conference's proceedings Guest-editor, 5th International Conference on Metallurgy Technology and Materials (4th ICMTM 2016). International
2016 Keynote Speaker, 4th International Conference on Metallurgy Technology and Materials bertempat di Singapore International
2016 Editor for Metallurgy Technology and Materials IV, Volume 867, Trans Tech Publication, 2016, doi: 10.4028/www.scientific.net/MSF.867, ISBN-13: 978-3-03835-741-4 International
2016 Scientific Committee , National Congress on Membrane Technology 2016 (NATCOM 2016), UTM National
2016 Speaker, Seminar Viva Superstar organized by Postgraduated office UTHM University
2016 Affiliated Researcher, HiCOE (Higher Institutions? Centre of Excellent) for Advanced Membrane Technology Research Center, Universiti Technology Malaysia (UTM)- 2015-2018 University
2016 Invited Speaker, National Congress on Membrane Technology 2016 (NATCOM 2016), UTM National

« Back