Staff Profile
| Full Name | PROF. MADYA Dr. SH SALLEH BIN SH AHMAD |
|---|---|
| Faculty | FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
| Department | JABATAN KEJURUTERAAN PEMBUATAN |
| Designation | DS54 - PROFESOR MADYA |
|
AHLI FOKUS PENYELIDIKAN INDUSTRIAL AND SYSTEM ENGINEERING FAKULTI KEJURUTERAAN MEKANIKAL DAN PEMBUATAN |
Field of Expertise
| Field Category (KPT) | APPLIED SCIENCES, ENGINEERING AND TECHNOLOGIES |
|---|---|
| Field (KPT) | Engineering Science and Technology |
| Field of Specialization (KPT) | Engineering Science and Technology |
Areas of Research Interest
| 1. | Scheduling Heuristics and Optimization |
| 2. | Assembly Line Balancing Heuristics |
| 3. | Factory Floor Simulation and Optimization |
Innovation Field of Interest
| 1. | Optimization Algorithms |
| 2. | Productivity Improvement Project |
Academic Qualification
| Year | Qualification | Institution |
|---|---|---|
| 2009 | DOKTOR FALSAFAH KEJURUTERAAN MEKANIKAL | UNIVERSITI TUN HUSSEIN ONN MALAYSIA |
| 2000 | SARJANA PENGURUSAN TEKNOLOGI | UNIVERSITI TEKNOLOGI MALAYSIA |
| 1986 | SARJANA MUDA KEJURUTERAAN MEKANIKAL | UNIVERSITY OF ALABAMA |
Professional Appointments
| DS54 - Profesor Madya |
Management Experience
| Date | Description |
|---|---|
| 01/01/2020 - 30/06/2021 | Ahli Fokus Penyelidikan
Fakulti Kejuruteraan Mekanikal dan Pembuatan, Industrial and System Engineering |
| 01/06/2014 - 31/08/2014 | Dekan
Pusat Pembangunan Dan Latihan Akademik, Unit Pentadbiran Dan Pengurusan Sistem |
| 01/06/2012 - 31/05/2014 | Dekan
Pusat Pembangunan Dan Latihan Akademik, Unit Pentadbiran Dan Pengurusan Sistem |
| 02/01/2012 - 31/12/2013 | Timbalan Dekan
Pusat Pembangunan Dan Latihan Akademik, Unit Pentadbiran Dan Pengurusan Sistem |
| 01/07/2011 - 31/12/2011 | Ketua Jabatan
Pusat Pembangunan Dan Latihan Akademik, Jabatan Pembangunan Program Akademik (JPPA) |
| 16/02/2010 - 30/06/2011 | Ketua Jabatan
Pusat Pembangunan Dan Latihan Akademik, Jabatan Pembangunan Program Akademik (JPPA) |
Professional Societies
| Year | Description | Role | Level |
|---|---|---|---|
| 16/03/2021 - 31/12/9999 | Industrial Engineering Operation Management (IEOM Society)
| Associated Member | Antarabangsa |
| 16/03/2021 - 31/12/9999 | IAENG Society of Mechanical Engineering
| Ahli | Antarabangsa |
| 16/03/2021 - 31/12/9999 | Malaysia Board of Technologists (MBOT)
| Ahli Berijazah | Kebangsaan |
| 16/03/2021 - 31/12/9999 | Rakan Pembimbing Perkhidmatan Awam Malaysia (AKRAB)
| Ahli | Kebangsaan |
| 16/03/2021 - 31/12/9999 | Board of Engineers Malaysia (BEM)
| Ahli Siswazah | Kebangsaan |
Teaching Experience
| Year | Description | Level |
|---|---|---|
| 2016 | Production Planning and Control | University |
| 2015 | Occupational Safety and Health | University |
| 2015 | Engineering Statistics | University |
| 2014 | Industrial Engineering | University |
| 2012 | Production and Operation Analysis [MDP10103], Sesi 20112012 Semester 2, UTHM, 2012 | University |
| 2012 | Production and Operation Analysis [MDP10103], Sesi 20122013 Semester 1, UTHM, 2012 | University |
Research Grants And Contracts
Publications
| Book |
|---|
| Musli Mohammad, Mohd Shahir Yahya, Mohd Nasrull Abdol Rahman, Ibrahim Masood, Sh Salleh Sh Ahmad & Saliza Azlina Osman (2018) Bda 40703 - Industrial Engineering, UTHM , 1, ISBN:0300000210 |
| Sh Salleh Sh Ahmad (2018) Kompilasi Kajian Tindakan Uthm, UTHM , 1, ISBN:9789672110774 |
| Salleh Ahmad Bareduan (2014) Essential Learning And Teaching For Lecturers In Higher Learning Institutions, UTHM , 1, ISBN:9789675457791 |
| Sh Salleh (2013) Seminar Amalan Pengajaran Di Uthm: Suatu Perkongsian, UTHM , 1, ISBN:9789670468594 |
| Sh Salleh Bin Sh Ahmad (2011) 50 Alumni Uthm Kejayaan Didikan Plsp-Ittho , UTHM , 35, ISBN:9789675457326 |
| Book Chapters |
| Noor Amira Isa and Salleh Ahmad Bareduan (2020) Methodology To Develop Bottleneck Based Heuristic For Permutation Flowshop Scheduling, Advances In Mechanical, Manufacturing And Aerospace Engineering: Series 1, UTHM , 98, ISBN:9789672916567 |
| SH SALLEH SH AHMAD (2018) Penambahbaikan Berterusan Melalui Pengubahsuaian Bahan Pembelajaran, Kompilasi Kajian Tindakan Uthm, UTHM , 135, ISBN:9789672110774 |
| Sh Salleh Bin Sh Ahmad (2009) Methodology To Develop Alternative Makespan Algorithm For Re-Entrant Flow Shop Using Bottleneck Approach, Engineering The Computer Science And It, In-Teh, Olajnica 19/2, 32000 Vukovar, Croatia , 143, ISBN:9789533070124 |
| General Publications |
| MOHD NASRULL BIN ABDOL RAHMAN, DR SH SALLEH BIN SH AHMAD, DR MUSLI BIN MOHAMMAD, NOR AZALI AZMIR (2015) Bda 31302 - Occupational Safety & Health, UTHM , 113, ISBN:- |
| Salleh Ahmad Bareduan (2013) Kemahiran Insaniah, UTHM |
| Salleh Ahmad Bareduan (2013) Outcome Based Education , UTHM |
| Journal |
| Hasbullah Hasbullah, Salleh Ahmad Bareduan (2021) The Framework Model Of Digital Cooperative To Explore Economic Potential In Higher Education, SINERGY, PUBLISHER FAKULTAS TEKNIK UNIVERSITAS MERCU BUANA, JL. RAYA MERUYA SELATAN, KEMBANGAN, JAKARTA 11650 , 6, 195, ISSN:14102331 |
| Salleh Ahmad Bareduan, Nur Fazlinda M. Pauzi, Noor Azizah Sidek, Azli Nawawi (2020) Manipulating The Onlooker Bees Behavior In Artificial Bee Colony Algorithm For Permutation Flow Shop Scheduling, INTERNATIONAL JOURNAL OF EMERGING TRENDS IN ENGINEERING RESEARCH, WORLD ACADEMY OF RESEARCH IN SCIENCE AND ENGINEERING , 8, 180, ISSN:23473983 |
| Dotun Adebanjo, Robin Mann, Musli Mohammad, Salleh Ahmad Bareduan (2019) A Study Of The Activities And Impact Of The Asian Productivity Organisation (Apo), INTERNATIONAL JOURNAL OF PRODUCTIVITY AND PERFORMANCE MANAGEMENT, Emerald Group Publishing Ltd. , 2, 262, ISSN:17410401 |
| Sidek N.A., Bareduan S.A. & Nawawi A. (2019) Performance Investigation Of Artificial Bee Colony (Abc) Algorithm For Permutation Flowshop Scheduling Problem (Pfsp), JOURNAL OF PHYSICS: CONFERENCE SERIES, INSTITUTE OF PHYSICS PUBLISHING , 3, 1, ISSN:17426596 |
| S. A. Elteriki, S. A. Bareduan and M. F. M. A. Hamzas (2017) Using Fitness Function To Solve Two-Sided Assembly Line Balancing By Spread Sheet, INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING, INSTITUTE OF RESEARCH AND JOURNALS, INDIA , 2, 26, ISSN:23202092 |
| M.F.M.A.Hamzas, S.A.Bareduan, M.Z.Zakaria (2016) A Review On Multi-Objective Optimization Using Evolutionary Algorithms For Two-Sided Assembly Line Balancing Problems, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network , 9, 10882, ISSN:1819-6608 |
| Salleh Ahmad Bareduan and Salem Abdulsalam Elteriki (2016) Methodology For Solving Two-Sided Assembly Line Balancing In Spreadsheet, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 5, 6568, ISSN:18196608 |
| Nur Fazlinda Binti Mohd Pauzi and Salleh Ahmad Bareduan (2016) Scheduling Analysis For Flowshop Using Artificial Bee Colony (Abc) Algorithm With Varying Onlooker Approaches, ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, Asian Research Publishing Network (ARPN) , 5, 6472, ISSN:18196608 |
| Salleh Ahmad Bareduan, Isstella Mengan Anak Gani (2014) Clustered Absolute Bottleneck Adjacent Matching Heuristic For Re-Entrant Flowshop Scheduling, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 1138, ISSN:1660-9336 |
| Azli Nawawi, Khalid Hasnan, Salleh Ahmad Bareduan (2014) Corellation Between Rfid Network Planning (Rnp) Parameters And Particle Swarm Optimization (Pso) Solutions, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 1, 1245, ISSN:1660-9336 |
| Ho Yoong Chow, Sulaiman Hj Hasan, Salleh Ahmad Bareduan (2013) Basic Concept Of Implementing Artificial Bee Colony (Abc) System In Flow Shop Scheduling, APPLIED MECHANICS AND MATERIALS, Trans Tech Publications , 3, 385, ISSN:1660-9336 |
| Salleh Ahmad Bareduan, Ishak Baba, Zarina Md Ali, Asmarashid Ponniran (2012) Continuous Quality Improvement Process Using Constructive Alignment, JOURNAL OF TECHNICAL EDUCATION AND TRAINING, UTHM , 6, 81, ISSN:2229-8932 |
| M. F. M. A. Hamzas, S.A Bareduan, Liyana Tajul, M.S Hussin, Z.A Zailani, Hasnul Hadi (2012) Development Of Improved Bottleneck-Based Heuristic For Re-Entrant Flow Shop With Dominant Machine At M1 And M4, INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING (IREME), Praise Worthy Prize , 3, 501, ISSN:19708734 |
| Salleh Ahmad Bareduan & Sulaiman Hasan (2012) Methodology To Develop Heuristic For Re-Entrant Flow Shop With Two Potential Dominant Machines Using Bottleneck Approach, INTERNATIONAL JOURNAL OF COMBINATORIAL OPTIMIZATION PROBLEMS AND INFORMATICS, Editada Mexico , 9, 81, ISSN:2007-1558 |
| Hamzas, M.F.M.A., Bareduan, S.A., Tajul, L., Hussin, M.S., Zailani, Z.A., Hadi (2012) Performance Evaluation Of M3 Bottleneck Based Heuristic For M1m2m3 Flow Shop, INTERNATIONAL REVIEW OF MECHANICAL ENGINEERING (IREME), Praise Worthy Prize , 9, 1253, ISSN:19708734 |
| Salleh Ahmad Bareduan and Sulaiman Hasan (2010) Makespan Algorithms And Heuristic For Internet-Based Collaborative Manufacturing Process Using Bottleneck Approach, JOURNAL OF SOFTWARE ENGINEERING & APPLICATIONS, Scientific Research Publishing , 1, 91, ISSN:1945-3116 |
| Sh Salleh bin Sh Ahmad (2009) Optimising Manufacturing Schedule Using Petri Net, JOURNAL OF SCIENCE AND TECHNOLOGY, UTHM , 12, 27, ISSN:1985-8809 |
| Salleh Ahmad Bareduan, Sulaiman Hj. Hasan and Saparudin Ariffin (2008) Finite Scheduling Of Collaborative Design And Manufacturing Activity: A Petri Net Approach, JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT, Emerald Group Publishing Limited , 3, 274, ISSN:1741-038X |
| Salleh Ahmad Bareduan, Sulaiman Hj Hasan, Noor Hakim Rafai and Muhammad Farid Shaari (2006) Cyber Manufacturing System For Small And Medium Enterprises: A Conceptual Framework, TRANSACTIONS OF NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION FOR SOCIETY OF MANUFACTURING ENGINEERS , Society of Manufacturing Engineers , USA , 5, 365, ISSN:1047-3025 |
| Sh Salleh Bin Sh Ahmad (2005) Development Of A Cyber Manufacturing Model For Smes In Malaysia, Sulaiman Hj Hasan, Sh Salleh Sh Ahmad & Mohd Amri Lajis, JURNAL SAINS & TEKNOLOGI, KUiTTHO , 6, 31, ISSN:18232698 |
| Sh Salleh Sh Ahmad (2004) Organizational Learning And Innovation In Southern Malaysia Furniture Industries, JURNAL SAINS & TEKNOLOGI, UTHM , 12, 41, ISSN:1823-2698 |
| Sh Salleh Sh Ahmad dan Sulaiman Hj Hassan (2003) Kaedah Pengukuran Tahap Inovasi Untuk Sektor Pembuatan: Satu Kajian Kes Dalam Industri Perabot, JURNAL SAINS & TEKNOLOGI, UTHM , 10, 52, ISSN:1675-7602 |
| Prosiding / Seminar |
| N.A. Isa, S.A. Bareduan and A.S. Zainudin (2020) Bottleneck-Based Heuristic For Permutation Flowshop Scheduling, IOP PUBLISHING , 1, ISBN:17578981 |
| A.S. Zainudin, S.A. Bareduan and N.A. Isa (2020) Dynamic Weighted Idle Time Heuristic For Flowshop Scheduling, IOP PUBLISHING , 1, ISBN:17578981 |
| M F M A Hamzas, S A Bareduan2, M S Bahari, S Zakaria and M Z Zakaria (2019) Double-Sided Assembly Line Optimization Using Witness Simulation, AIP PUBLISHING , 020151-1, ISBN:9780735418714 |
| M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, S. Ghazali, S. Zairi (2017) A Representation Model For Developing Double-Sided Assembly Line Balancing Model: An Industrial Case Study, AIP Publishing , 020180-1, ISBN:978073541565 |
| M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, S. Ghazali, S. Zairi (2017) Implementation Of Ranked Positional Weight Method (Rpwm) For Double-Sided Assembly Line Balancing Problems, AIP Publishing , 020183-1, ISBN:9780735415652 |
| M. F. M. A. Hamzas, S. A. Bareduan, M. Z. Zakaria, W. J. Tan, S. Zairi (2017) Validation Of X1 Motorcycle Model In Industrial Plant Layout By Using Witnesstm Simulation Software, AIP Publishing , 020182-1, ISBN:978073541565 |
| Salem Abdulsalam Elteriki, S. A. Bareduan, Mohd Fidzwan Md Amin Hamzas (2016) Using Fitness Function To Solve Two-Sided Assembly Line Balancing By Spread Sheet, International Academy of Science, Technology, Engineering and Management , 25 , ISBN:9789386291479 |
| S.A. Bareduan (2015) A Review On Multi-Objective Optimization Using Evolutionary Algorithms For Two-Sided Assembly Line Balancing Problems, ARPN(JEAS) |
| Salleh Ahmad Bareduan (2015) Improving The Manufacturability And Assembly Efficiency Of Kapok Seed Separator |
| Salleh Ahmad Bareduan (2015) Methodology For Solving Two-Sided Assembly Line Balancing In Spreadsheet, ARPN(JEAS) |
| Salleh Ahmad Bareduan (2015) Scheduling Analysis For Flowshop Using Artificial Bee Colony (Abc) Algorithm With Varying Onlooker Approaches, ARPN(JEAS) |
| Salleh Ahmad Bareduan (2014) Effect Of Trial Counter Variation On The Performance Of Artificial Bee Colony (Abc) Algorithm For Permutation Flowshop Scheduling Problem (Pfsp), American Institut of Physics |
| Sh Salleh Bin Sh Ahmad (2012) Basic Concept Of Implementing Artificial Bee Colony (Abc) System In Flow Shop Scheduling, UTHM |
| Sh Salleh Bin Sh Ahmad (2011) Academic Achievement Of Students And Its Relationship With Teaching And Learning Methods According To Student Perceptions, UTHM |
| Sh Salleh Bin Sh Ahmad (2011) An Automated Product Identification System For Reverse Logistics Operation, UTHM |
| Sh Salleh Bin Sh Ahmad (2011) Continuous Quality Improvement Towards Achieving Learning Outcomes, UTHM |
| Sh Salleh Bin Sh Ahmad (2011) Cqi Process Using Constructive Alignment, UTHM |
| Sh Salleh Bin Sh Ahmad (2011) The Application Of Rfid Technology To Capture And Record Product And Process Data For Reverse Logistics Sorting Activity, Universitas Indonesia, Google Scholar |
| Sh Salleh Bin Sh Ahmad (2010) Bottleneck Adjacent Matching Heuristics Versus The Neh For Re-Entrant Flow Shop Scheduling |
| Sh Salleh Bin Sh Ahmad (2009) Bottleneck-Based Heuristic For Re-Entrant Flow Shop With Two Potential Dominant Machine |
| Sh Salleh Bin Sh Ahmad (2009) Bottleneck-Based Makespan Algorithms And Heuristic For Re-Entrant Flow Shop With Dominant Machine At Last Stage |
| Sh Salleh Bin Sh Ahmad (2008) Bottleneck Adjacent Matching 1 (Bam1) Heuristic For Re-Entrant Flow Shop With Dominant Machine |
| Sh Salleh Bin Sh Ahmad (2008) Bottleneck Adjacent Matching 3 (Bam3) Heuristic For Re-Entrant Flow Shop With Dominant Machine |
| Sh Salleh Bin Sh Ahmad (2008) Bottleneck Adjacent Matching 4 (Bam4) Heuristic For Re-Entrant Flow Shop With Dominant Machine |
| Sh Salleh Bin Sh Ahmad (2008) Bottleneck-Based Makespan Algorithm For Cyber Manufacturing System |
| Sh Salleh Bin Sh Ahmad (2008) Makespan Computation For Cyber Manufacturing Centre Using Bottleneck Analysis: A Re-Entrant Flow Shop |
| Sh Salleh Bin Sh Ahmad (2006) Cyber Manufacturing System For Small And Medium Enterprises: A Conceptual Framework, Salleh Ahmad Bareduan, Sulaiman Hj Hasan, Noor Hakim Rafai And Mu |
| Sh Salleh Bin Sh Ahmad (2005) Dynamic Finite Scheduling For Small And Medium Size Furniture Painting Factories, Salleh Ahmad Bareduan, Sulaiman Hj Hasan And Azlis Sani Md Jalil |
| Sh Salleh Bin Sh Ahmad (2005) Internet-Based Collaborative Tools For Small And Medium Industries, Salleh Ahmad Bareduan And Sulaiman Hj Hasan |
Consultancies
| Year | Description | Level |
|---|---|---|
| 2017 | Panel of internal assessor for Fundamental Research Grant Scheme Application | University |
| 2017 | Program assessor for Bachelor of Technology Management, UniKL, 2017-2019 | National |
| 2016 | Facilitator for short course on Arena Simulation Software, organized by student association | University |
| 2016 | Panel of internal assessor for Fundamental Research Grant Scheme Application | University |
| 2015 | Contract Research on Strengthening of National Productivity Organizations (NPOs) Assistance Program, Centre for Organizational Excellence Research, Massey University, New Zealand, March 2014 to March 2015 | International |
| 2015 | Panel of internal assessor for Fundamental Research Grant Scheme Application | University |
| 2015 | Consultant (Lecturer and facilitator), Project Management Towards Organization Sustainability, KuTech, (Project worth RM250,000) | International |
| 2014 | Lead Consultant for Academic Audit Program, IKBN Temerloh 2014 | National |
| 2014 | Consultant (Lecturer and facilitator), Project Management Towards Organization Sustainability, KuTech, (Project worth RM250,000) | International |
| 2013 | Lead Auditor for Pre-Full Acreditation Audit Program, Politeknik Ibrahim Sultan | National |
| 2013 | Lead Auditor for Pre-Full Acreditation Audit Program, Politeknik Merlimau | National |
| 2012 | Consultative for Certificate and Diploma in Engineering Technology, IKBN Temerloh, Acreditation Group, 2010-2012 | National |
| 2011 | Consultative for Diploma in Engineering Technology, KKTM Sri Gading, Acreditation Group, 2010-2011 | National |
Supervision
| Year | Description | Role |
|---|---|---|
| 2018 | Examiner for Master Thesis: Siti Shafika binti Mohamad (2018): An Office Ergonomic Risk Assessment Tool for Assessing Risk Factors of Work Related Musculouskeletal Disorders | Examiner |
| 2018 | Reviewer for Elsevier Journal of Computers and Industrial Engineering, Aug 2018 | Referee |
| 2018 | Reviewer for International Conference of Mechanical and Manufacturing Engineering ICME2018, January 2018 | Referee |
| 2018 | Reviewer for Elsevier Journal of Computers and Industrial Engineering, May 2018 | Referee |
| 2018 | Examiner for PhD Thesis: Edly Ferdin Ramly (2018):Diagnosis Framework for Selecting Operational Improvement Opportunities in Malaysian Industry | Examiner |
| 2018 | Programme Assesor audit at UniKL for Bachelor of Technology Management | External Assessor |
| 2017 | Reviewer for Elsevier Journal of Computers and Industrial Engineering, January 2017 | Referee |
| 2017 | Examiner for PhD Thesis: Aref Mabrouk Rohoma Alkelani (2017): ISO 9001 and Organisational Culture as a Mediator Between the TQM and Organisatinal Performance in Manufacturing Companies in Libya | Examiner |
| 2016 | Reviewer for International Conference on Mechanical and Manufacturing Engineering (ICME 2016) | Referee |
| 2016 | External Examiner for Hafizah binti Azmi, Master, Universiti Teknikal Malaysia Melaka, Mac 2016 | External Examiner |
| 2016 | Examiner for Thesis: Yeoh Kim Hao | Examiner |
| 2015 | Supervisor for Noor Amira Binti Isa, Master, UTHM, 2017 | Supervisor |
| 2015 | Examiner for Thesis: Noordiana Bte Kassim (2015): The Development of New STEP-NC Compliant System for STEP-NC Integration (STEP-NC Mapping System) | Examiner |
| 2015 | Reviewer for 6th International Conference on Industrial Engineering and Operations Management (IEOM 2016) | Referee |
| 2015 | Examiner for Thesis: Kamran Latif (2015): New Technique for the Development of Open CNC System Based on ISO 14649 and ISO 6983 | Examiner |
| 2015 | Supervisor for Amira Syuhada Binti Zainudin, Master, UTHM, 2017 | Supervisor |
| 2014 | Reviewer for International Conference on Mechanical and Manufacturing Engineering (ICME 2014) | Referee |
| 2014 | Supervisor for Salem Elteriki, PhD, UTHM, 2018 | Supervisor |
| 2014 | Supervisor for Mohd Fidzwan Bin Amin Hamzas, PhD, UTHM, (current student) | Supervisor |
| 2012 | Reviewer for The Journal Academia, UiTM, 2012 | Referee |
| 2012 | Reviewer for Emerald Journal of Manufacturing Technology Management, 2012 | Referee |
| 2012 | Reviewer for International Conference on Mechanical and Manufacturing Engineering 2012, November 2012 | Referee |
| 2012 | Co-supervisor for Ho Yoong Chow, PhD, UTHM, (current student) | Supervisor |
| 2012 | Supervisor for Istella Mengan Anak Gani, Master, UTHM, 2012 | Supervisor |
| 2012 | Supervisor for Nur Fazlinda Binti Mohd Pauzi, Master, UTHM, 2015 | Supervisor |
| 2012 | Co-supervisor for Azle Bin Nawawi, PhD, UTHM, 2015 | Supervisor |
| 2012 | Supervisor for Noor Azizah Sidek, PhD, UTHM, (current student) | Supervisor |
| 2011 | Supervisor for Mohd Salleh Bin Abdul Rahim, Master, UTHM, 2011 | Supervisor |
| 2011 | Supervisor for Mohd Hairul Bin Mohd Yusoff, Master, UTHM, 2011 | Supervisor |
| 2010 | Supervisor for Mohd Fidzwan Bin Amin Hamzas, Master, UTHM, 2010 | Supervisor |
Extension & Public Services
| Year | Description | Level |
|---|---|---|
| 2016 | Track Director for the 7th International Conference on Mechanical and Manufacturing Engineering (ICME 2016) | International |
| 2015 | Leader for Industrial and System Engineering Research Group (ISE), 2015 & 2016 | University |
| 2015 | Track chair for 6th International Conference on Industrial Engineering and Operations Management (IEOM 2016) | International |
| 2014 | Panel for Board of Studies for Bachelor in Integrated Supply Chain and Operation Management, UNiKL | National |
| 2014 | Panel for Board of Study Bachelor of Management Technolgy, UNiKL | National |
| 2014 | Panel for Board of Study for Master of Manufacturing Management, UNiKL | National |
| 2014 | Chairman, Parents and Teacher Association SK Parit Raja, 2014-2016 | District |
| 2012 | Chairman for Parents and Teacher Association, Sekolah Kebangsaan Parit Raja, 2012 - 2014 | District |
| 2012 | Treasurer for University Staff Club (KSKUiTTHO), 2011-2013 | University |
| 2012 | Member for Civil Servants Peer Counseling Group (AKRAB), 2012 | University |
| 2012 | Committee Member for Malaysian Higher Education Teaching and Learning Council (MAGNETIC), Ministry of Higher Education, 2012 | National |
| 2012 | Working Committee for Joint Commitee MOHE, TNCA and Politechnic, 2012-2013 | National |
Courses & Training
| Year | Description Organiser / Venue | Date |
|---|---|---|
| 2021 | KURSUS ADOBE INDESIGN AND MANAGING PDF FILES UTHM / Secara dalam talian: Zoom Meeting | 12/04/2021 |
| 2021 | TAKLIMAT BROADLY- DEFINED ENGINEERING PROBLEMS AND ENGINEERING ACTIVITIES UTHM / ZOOM MEETING | 29/03/2021 |
| 2021 | SESI PERKONGSIAN SKIM PEMBANGUNAN POTENSI STAF UTHM / Google Meet | 21/03/2021 |
| 2021 | MICRO-CREDENTIAL FOR TECHNICAL VOCATIONAL EDUCATION & TRAINING UTHM / (Virtual) Google Meet:meet.google.com/crf-oyir-bcv | 17/03/2021 |
| 2021 | TAKLIMAT CEO@FACULTY BERSAMA YBHG. DATO' DR. MOHD SOFI BIN OSMAN - COVID AND ITS IMPACT ON SEMICONDUCTOR INDUSTRY UTHM / ZOOM MEETING | 15/03/2021 |
| 2020 | LOOK PROFESIONAL WITH OBS STUDIO UTHM / - | 15/07/2020 |
| 2020 | BOOST YOUR PRODUCTIVITY USING OFFICE 365 MOBILE APPS UTHM / - | 06/07/2020 |
| 2020 | MAKE INTERACTIVE AND ENGAGING PRESENTATIONS FOR ONLINE TEACHING UTHM / - | 10/06/2020 |
| 2020 | KURSUS PEMERKASAAN PAK UTHM 2020 UTHM / - | 10/03/2020 |
| 2020 | KURSUS PENGENDALIAN KABINET BIOKESELAMATAN PEJABAT PENDAFTAR,UTHM / BILIK LATIHAN SERI SIANTAN, ARAS 3 PEJABAT PENDAFTAR | 08/03/2020 - 09/03/2020 |
| 2020 | KURSUS PENGENDALIAN KABINET BIOKESELAMATAN LAIN-LAIN / BANGUNAN PTTA | 09/02/2020 |
| 2020 | KULIAH ZUHUR ( SYEIKH ABU ZAKI AS-SANGAFARI) UTHM / MASJID SULTAN IBRAHIM, UTHM | 29/01/2020 |
| 2019 | PROGRAM SAFETY DAY PLUS - FKMP, UTHM UTHM / BLOK A, G3 | 12/11/2019 |
| 2019 | KULIAH DHUHA ISTEMEWA UTHM / MASJID UTHM | 18/07/2019 |
| 2019 | KULIAH ZUHUR UTHM / UTHM | 17/07/2019 |
| 2019 | FENOMENA AKHIR ZAMAN DARI KACA MATA FALAK SYAR'IE UTHM / UTHM | 15/07/2019 |
| 2019 | KURSUS SIRIM CERTIFIED AEROSPACE MANAGEMENT SYSTEM PROFESSIONAL SIRI II UTHM / UTHM | 07/04/2019 - 09/04/2019 |
| 2019 | KURSUS AS9100D : 2016 (AQMS) UTHM / PTTA UTHM | 10/02/2019 - 14/02/2019 |